Database Develop

9.6.20 Dev Global Beta doesn't pass the SafetyNet: cts fails

Why last 9.6.20 doesn't pass the SafetyNet?
I have cts fail and so problems with playstore and app. Mi9 is all stock, no root, bootloader locked. Installed this 9.6.20 through fastboot rom.
So is it a problem in this last that will be solved in the next update? Or? What i need to do?

I updated via OTA. No problems whatsoever. Maybe try previous beta and do the update via OTA too.

kennycoder said:
I updated via OTA. No problems whatsoever. Maybe try previous beta and do the update via OTA too.
Click to expand...
Click to collapse
mmmm good to know But you were initially with Global stable and then Global dev from recovery? What was first version of Global dev?
It's a strange problem because i simply flashed the fastboot rom 9.6.20 so all should be working

denzel09 said:
Why last 9.6.20 doesn't pass the SafetyNet?
I have cts fail and so problems with playstore and app. Mi9 is all stock, no root, bootloader locked. Installed this 9.6.20 through fastboot rom.
So is it a problem in this last that will be solved in the next update? Or? What i need to do?
Click to expand...
Click to collapse
Are you talking about the dev ROM or the EU ROM? If you're talking about the official dev ROM, that will never pass safety net.

Well, I had the same problem as yours - cannot pass safetynet check. Then I made decision change back global stable version and everything back - pass safetynet check, pass root check when adding credit card by downgrade google service.
The development version seems to keep update the google play service and it would make unexpected result.
-Kris

Ulver said:
Are you talking about the dev ROM or the EU ROM? If you're talking about the official dev ROM, that will never pass safety net.
Click to expand...
Click to collapse
The Global Developer Rom. But it's strange, i know that many used the Dev rom like daily stable rom so it's a bit strange what you say.
If i flash Global Stable and then update to Developer?

Kris Chen said:
Well, I had the same problem as yours - cannot pass safetynet check. Then I made decision change back global stable version and everything back - pass safetynet check, pass root check when adding credit card by downgrade google service.
The development version seems to keep update the google play service and it would make unexpected result.
-Kris
Click to expand...
Click to collapse
Thanks for reply, but i can't understand well what you have written. Can you explain better? What is your solution?

denzel09 said:
Thanks for reply, but i can't understand well what you have written. Can you explain better? What is your solution?
Click to expand...
Click to collapse
There is no solution. If you want to pass safety net, use the stable ROM.

Ulver said:
There is no solution. If you want to pass safety net, use the stable ROM.
Click to expand...
Click to collapse

the same for me. Safetynet does not pass on this week's beta. my card has been removed from Google pay. I went back to the previous rom and everything works again.

meuhmeuh51 said:
the same for me. Safetynet does not pass on this week's beta. my card has been removed from Google pay. I went back to the previous rom and everything works again.
Click to expand...
Click to collapse
What's your previous rom?

denzel09 said:
What's your previous rom?
Click to expand...
Click to collapse
Rom bêta dev global 19.6.13

Development Rom exists a lot of uncertainty factors would impact safetynet check. If you want to use google pay, I recommend you switch back stable Rom.
If you want to root your device after switching back stable Rom and enjoy your favor tweak to enhance your phone function as well as google pay, must keep your eyes on google play service.
New version of google play service would make you cannot reactivate your credit card because system would say root detected even how you hide root in magisk. The working one solution is to downgrade google play service version to 15.x
Search in section of magisk discussion board in xda and you will find the way how to fix it.
Kris
denzel09 said:
Thanks for reply, but i can't understand well what you have written. Can you explain better? What is your solution?
Click to expand...
Click to collapse

denzel09 said:
mmmm good to know But you were initially with Global stable and then Global dev from recovery? What was first version of Global dev?
It's a strange problem because i simply flashed the fastboot rom 9.6.20 so all should be working
Click to expand...
Click to collapse
I was on global stable but couldn't flash beta without unlocking bootloader so had to do a sideload with the XiaoMiTool. Intial was something like 9.3.x but not 100% sure. Was a release from like 4 weeks ago iirc.

AOSP ROM?

Hi everyone, I got a question: do you think we gonna have an AOSP ROM for this phone?

I need a rom for this phone can any one help?

Ehtisham4417 said:
I need a rom for this phone can any one help?
Click to expand...
Click to collapse
It's your lucky day pal!
MIUI 12 stable for Merlin just dropped https://bigota.d.miui.com/V12.0.1.0.QJOCNXM/miui_MERLIN_V12.0.1.0.QJOCNXM_86c4c0b217_10.0.zip
(Link from https://www.xda-developers.com/down...ing-out-several-xiaomi-redmi-mi-poco-devices/ )
Importantly though, that is the Chinese ROM - will have to wait a while longer for the global version

thesoupthief said:
It's your lucky day pal!
MIUI 12 stable for Merlin just dropped https://bigota.d.miui.com/V12.0.1.0.QJOCNXM/miui_MERLIN_V12.0.1.0.QJOCNXM_86c4c0b217_10.0.zip
(Link from https://www.xda-developers.com/down...ing-out-several-xiaomi-redmi-mi-poco-devices/ )
Importantly though, that is the Chinese ROM - will have to wait a while longer for the global version
Click to expand...
Click to collapse
I just installed this, it's really good in almost everything except the control center.
Sometimes it lags when opening.

Google?
FirasMohamed said:
I just installed this, it's really good in almost everything except the control center.
Sometimes it lags when opening.
Click to expand...
Click to collapse
I see this is China, does it have Google Mobile Services? If not, is there a way to install the GMS ?

fabianowerner said:
I see this is China, does it have Google Mobile Services? If not, is there a way to install the GMS ?
Click to expand...
Click to collapse
It doesn't have the google play services pre installed but, there is a really easy way to install it
Launch the Mi App Store
Search for Google
Scroll down to the bottom of the list and select this option:
Install Google Play on Xiaomi phone
Though the results will be in Chinese, you should be able to make out the Google Installer app
Select Install, then when it has downloaded tap Open
Hit the big blue circular button to begin installing the various components
You will be prompted to allow the phone to install apps from unknown sources - select Settings, toggle on the slider, then proceed with the installation
Allow any prompts for permissions that pop up

I'm waiting for an EU / global version of this - doesn't seem to be forthcoming...

thesoupthief said:
It's your lucky day pal!
MIUI 12 stable for Merlin just dropped https://bigota.d.miui.com/V12.0.1.0.QJOCNXM/miui_MERLIN_V12.0.1.0.QJOCNXM_86c4c0b217_10.0.zip
(Link from https://www.xda-developers.com/down...ing-out-several-xiaomi-redmi-mi-poco-devices/ )
Importantly though, that is the Chinese ROM - will have to wait a while longer for the global version
Click to expand...
Click to collapse
I suggest to wait longer for global or Xiaomi.EU version better than ( Chinese ) because at most xiaomi rolling it for testing before the final touch

I suggest you to keep on stock rom firmware only.
Root it with magisk. Flash it with twrp.
And everything is fine.
If you want to know what is working for MERLIN, take a look: https://forum.xda-developers.com/t/...omi-redmi-note-9-xiaomi-redmi-10x-4g.4204873/
Do you need help with your MERLIN device ?
Read this FAQ: https://forum.xda-developers.com/t/...for-merlin-redmi-10x-4g-redmi-note-9.4225177/

Matterport Capture app - can't run because rooted, any way around this?

Matterport - Apps on Google Play
Transform your business with digital twins
play.google.com
I'm trying to use this app on my Xiaomi Mi Note 10 with xiaomi.eu latest stable rom, with magisk rooted. I've used magiskhide but it still says it cannot run due to rooted. any workarounds?
thanks!

geminihc said:
Matterport - Apps on Google Play
Transform your business with digital twins
play.google.com
I'm trying to use this app on my Xiaomi Mi Note 10 with xiaomi.eu latest stable rom, with magisk rooted. I've used magiskhide but it still says it cannot run due to rooted. any workarounds?
thanks!
Click to expand...
Click to collapse
first of all, hide magisk app itself (rebuild with random package name, its in Magisk settings). clear play store and play services data and reboot, then check again
if still not working, you can try Xposed modules like XPrivacyLua or SudoHide

thank you! that first advice worked! cantbeleve it was so simple!

geminihc said:
thank you! that first advice worked! cantbeleve it was so simple!
Click to expand...
Click to collapse
I'm glad I could help

Bumping this. Wondering if there's a work around now..
Tried as recommended but doesn't work

Question Google pay root no longer working!

So phone is rooted with safety net bypassed and all app Inc Gpay worked fine till this morning! Did Google change something, has anyone noticed anything?? Any other ways around? Thanks

I think a lot of people face the same issue. You can check this :
https://forum.xda-developers.com/t/discussion-google-pay-magisk-discussion-thread.3906703/page-128
I think Google did a upgrade.

Try to spoof your phone to an Android 10 fingerprint . I have choosen the "MI 10T Pro Europe" Fingerprint . Cleared the cash of Playstore and Gpay. and Rebooted the phone.
Now it's seems to be OK.
ps: You have to install MagiskHide Props

Guys reading the thread above, I changed the font recently. Just as Google updated GPay it stopped working. Someone mentioned that font ot theme change can upset root status.I reverted to original font and reboot. Viola Gpay is working again.. amazing stuff. thanks

samy233 said:
Try to spoof your phone to an Android 10 fingerprint . I have choosen the "MI 10T Pro Europe" Fingerprint . Cleared the cash of Playstore and Gpay. and Rebooted the phone.
Now it's seems to be OK.
ps: You have to install MagiskHide Props
Click to expand...
Click to collapse
I wanted to give fingerprint spoofing a try too, but I don't want to change my device's fingerprint to another device.
Perhaps a vili Android 11 (MIUI 12) fingerprint would work, too.
But I don't know the right fingerprint. My current Android 12 fingerprint is:
Xiaomi/vili_eea/vili:12/SKQ1.211006.001/V13.0.10.0.SKDEUXM:user/release-keys
Perhaps someone could post his EEA Android 11 fingerprint?

Another update: font restore worked only for a few minutes. As soonest as I went to use a nfc pay the "warning" came back and Gpay stopped working.
Next solution for me was to change the fingerprint to a Mi 10T pro (A10). Rebooted device and still the same warning. As clear cache option is greyed out, I deleted Google wallet and reinstalled. So far no warning.I just have to try it out in the shop now and see if it works

_WiNNa_ said:
I wanted to give fingerprint spoofing a try too, but I don't want to change my device's fingerprint to another device.
Perhaps a vili Android 11 (MIUI 12) fingerprint would work, too.
But I don't know the right fingerprint. My current Android 12 fingerprint is:
Xiaomi/vili_eea/vili:12/SKQ1.211006.001/V13.0.10.0.SKDEUXM:user/release-keys
Perhaps someone could post his EEA Android 11 fingerprint?
Click to expand...
Click to collapse
This is my config now , you can see the original one and the spoofed one.
You can also see in the menu that you can reset the fingerprint , so you can back to normal.

samy233 said:
View attachment 5666255
This is my config now , you can see the original one and the spoofed one.
You can also see in the menu that you can reset the fingerprint , so you can back to normal.
Click to expand...
Click to collapse
Yes, can confirm this is working.
But I would definitely feel better, when this will work with a fingerprint from another version of Android from this very same device.

_WiNNa_ said:
Yes, can confirm this is working.
But I would definitely feel better, when this will work with a fingerprint from another version of Android from this very same device.
Click to expand...
Click to collapse
Right , we have to wait for a fix.

samy233 said:
View attachment 5666255
This is my config now , you can see the original one and the spoofed one.
You can also see in the menu that you can reset the fingerprint , so you can back to normal.
Click to expand...
Click to collapse
How do I get/start the GUI?

soadfan said:
How do I get/start the GUI?
Click to expand...
Click to collapse
You did the right think , I don't know why is not getting started, maybe the path.
Here's mine, I use Termux

soadfan said:
How do I get/start the GUI?
Click to expand...
Click to collapse
Did you reboot after installing the module?

Update:
Fingerprint set to Mi 11 Pro EU A10 works as usual.
Tried and tested and all my Gpay and banking apps working as before.

samy233 said:
You did the right think , I don't know why is not getting started, maybe the path.
Here's mine, I use Termux
Click to expand...
Click to collapse
_WiNNa_ said:
Did you reboot after installing the module?
Click to expand...
Click to collapse
Yes, and yes, I've installed Termux too and it's working. I guess the terminal emulator is not that good anymore

soadfan said:
Yes, and yes, I've installed Termux too and it's working. I guess the terminal emulator is not that good anymore
Click to expand...
Click to collapse
cool, so now all is ok

So, I've tested with
Xiaomi/vili_eea/vili:11/RKQ1.200903.002/V12.5.20.0.RKDEUXM:user/release-keys
That's not working

_WiNNa_ said:
So, I've tested with
Xiaomi/vili_eea/vili:11/RKQ1.200903.002/V12.5.20.0.RKDEUXM:user/release-keys
That's not working
Click to expand...
Click to collapse
Yes , all the A12/A11 modele seems not working

What's the downside of using another device's fingerprint, like 10T Pro for example?

get newest Magisk enable Zygisk:
install Zygisk LSPosed
Release 1.8.3 · LSPosed/LSPosed
Changelog Fix module not working normally on Android 10 Refine notification on module installation (thanks @fankes) Fix hook may not work on debuggable apps/modules Fix XSharedPreference after a s...
github.com
and Shamiko
Releases · LSPosed/LSPosed.github.io
Contribute to LSPosed/LSPosed.github.io development by creating an account on GitHub.
github.com
in Magisk, hide root by going into the Denylist and hide it from the google apps like google wallet, play store, services framework, carrier services, clear cache and restart, if it doesnt work, use the Universal Safetynet Fix with it.

Marvin732 said:
get newest Magisk enable Zygisk:
install Zygisk LSPosed
Release 1.8.3 · LSPosed/LSPosed
Changelog Fix module not working normally on Android 10 Refine notification on module installation (thanks @fankes) Fix hook may not work on debuggable apps/modules Fix XSharedPreference after a s...
github.com
and Shamiko
Releases · LSPosed/LSPosed.github.io
Contribute to LSPosed/LSPosed.github.io development by creating an account on GitHub.
github.com
in Magisk, hide root by going into the Denylist and hide it from the google apps like google wallet, play store, services framework, carrier services, clear cache and restart, if it doesnt work, use the Universal Safetynet Fix with it.
Click to expand...
Click to collapse
No need to spoof to another model ? works with A12 ? what's your phone ?

Question Anyone pass cts and gpay woring with OxygenOS 12.1 A.15 rooted?

Hi
I am rooting my oneplus 10 pro and success
but try everything include safetynet-fix-integrity,Shamiko,MagiskHidePropsConf-master
still can't pass cts and google pay always warning
Is there anyone pass cts and google pay working after rooted?
thanks for reading!

qky said:
Hi
I am rooting my oneplus 10 pro and success
but try everything include safetynet-fix-integrity,Shamiko,MagiskHidePropsConf-master
still can't pass cts and google pay always warning
Is there anyone pass cts and google pay working after rooted?
thanks for reading!
Click to expand...
Click to collapse
Yes , remove magiskhideprops , make sure you installed magisk beta, shamiko latest 0.5.2, universal safetynet latest fix 2.3.1
And zygisk is enabled.

qky said:
Hi
I am rooting my oneplus 10 pro and success
but try everything include safetynet-fix-integrity,Shamiko,MagiskHidePropsConf-master
still can't pass cts and google pay always warning
Is there anyone pass cts and google pay working after rooted?
thanks for reading!
Click to expand...
Click to collapse
Have you enabled denylist and ticked Play services from system apps?
Check gms and gms.unstable in it and reboot.
Enforce denylist off

Hi
thanks for replying
How about your google pay working?

Aarif goku said:
Have you enabled denylist and ticked Play services from system apps?
Check gms and gms.unstable in it and reboot.
Enforce denylist off
Click to expand...
Click to collapse
restore the system
root
install magisk 25.2
zygisk enable
Enforce denylist off
ticket all google app include system app
module :
shamiko v0.5.2
universal SafetyNET Fix v2.3.1
only pass Basic

qky said:
Hi
thanks for replying
How about your google pay working?
Click to expand...
Click to collapse
Yes

qky said:
restore the system
root
install magisk 25.2
zygisk enable
Enforce denylist off
ticket all google app include system app
module :
shamiko v0.5.2
universal SafetyNET Fix v2.3.1
only pass Basic integrity
cts still fail
any suggestion?
many thanks
View attachment 5682971View attachment 5682977View attachment 5682979View attachment 5682981View attachment 5682975
Click to expand...
Click to collapse
No need to put all Google apps ,
And hide magisk manager from settings, it should reinstall itself with a different package name.

Aarif goku said:
No need to put all Google apps ,
And hide magisk manager from settings, it should reinstall itself with a different package name.
Click to expand...
Click to collapse
sort
flash A11 version
patch everything
finally work
appreciate

qky said:
sort
flash A11 version
patch everything
finally work
appreciate
Click to expand...
Click to collapse
Android 11 or OxygenOS A.11 ?

Aarif goku said:
Android 11 or OxygenOS A.11 ?
Click to expand...
Click to collapse
OxygenOS A.11

I'm on A.15 and use gpay all the time.
Latest Magisk stable
Enabled zygote
Enabled enforce list (don't configure it)
Install the module "Universal Safety net Fix"
You wont pass a root checker as this only blocks google services from detecting root.