I installed yesterday the samsung firware android 12, UI 4.1 and it´s nice, everything is running OK.
Did you do it through Odin?
dorian2kx said:
Did you do it through Odin?
Click to expand...
Click to collapse
Yes.
Which did you flash I wanna try it.
I think there is only one, the Hong Kong firmware.
POLAND HAS TOO
Yes, now Poland has an Android 12 version.
I installed the Poland firmware and it is better if you live in Europe. Everything is OK.
Related
The I9305 firmware update for the TGY (Hong Kong) region just came out...so I updated...only to find it is 4.1.1 still...but all other I9305 and I9300 updates are going to 4.1.2 ... why did Hong Kong get 4.1.1 again? Any ideas why this happens?
it's a carrier thing. they were working on a 4.1.1 base not a 4.1.2 base.. just means they're slow or there's something in 4.1.2 they didn't like.
random.. its not a typo is it? well the changelig is completely different too so i wouldn't be surprised. question is, does it have the premium suite features?
That's just the thing any firmware release in Hong Kong is not linked to a specific carrier by law. However, the I9305 is a little different because it has LTE and only one provider in Hong Kong, 中国移动 has LTE so they are the only who carry the phone...but still unbranded. How do I check if it has the premium suite? Since it is 4.1.1 I cannot see this being possible? Is there any other I9305 4.1.2 stock release capable of Chinese localization? Thanks!
Innis said:
That's just the thing any firmware release in Hong Kong is not linked to a specific carrier by law. However, the I9305 is a little different because it has LTE and only one provider in Hong Kong, 中国移动 has LTE so they are the only who carry the phone...but still unbranded. How do I check if it has the premium suite? Since it is 4.1.1 I cannot see this being possible? Is there any other I9305 4.1.2 stock release capable of Chinese localization? Thanks!
Click to expand...
Click to collapse
Innis,
Your information "only one provider in Hong Kong, 中国移动 has LTE" is WRONG.
Most provider in Hong Kong have LTE. You can only say that the update release from 4.1.1 to 4.1.2 will be done by region one by one but not all at the same time. Please correct me if I am wrong.
---------- Post added at 04:49 PM ---------- Previous post was at 04:21 PM ----------
Innis said:
That's just the thing any firmware release in Hong Kong is not linked to a specific carrier by law. However, the I9305 is a little different because it has LTE and only one provider in Hong Kong, 中国移动 has LTE so they are the only who carry the phone...but still unbranded. How do I check if it has the premium suite? Since it is 4.1.1 I cannot see this being possible? Is there any other I9305 4.1.2 stock release capable of Chinese localization? Thanks!
Click to expand...
Click to collapse
Cowboy88 said:
Innis,
Your information "only one provider in Hong Kong, 中国移动 has LTE" is WRONG.
Most provider in Hong Kong have LTE. You can only say that the update release from 4.1.1 to 4.1.2 will be done by region one by one but not all at the same time. Please correct me if I am wrong.
Click to expand...
Click to collapse
Innis,
What I can find in SamMobile for the new Firmware for Hong Kong as below.
PDA: I9305ZHBLL3
CSC: I9305TGYBLJ1
Version: 4.1.2
Date: 2012-12-27
Regions: Hong Kong
Cowboy88 said:
Innis,
Your information "only one provider in Hong Kong, 中国移动 has LTE" is WRONG.
Most provider in Hong Kong have LTE. You can only say that the update release from 4.1.1 to 4.1.2 will be done by region one by one but not all at the same time. Please correct me if I am wrong.
---------- Post added at 04:49 PM ---------- Previous post was at 04:21 PM ----------
Innis,
What I can find in SamMobile for the new Firmware for Hong Kong as below.
PDA: I9305ZHBLL3
CSC: I9305TGYBLJ1
Version: 4.1.2
Date: 2012-12-27
Regions: Hong Kong
Click to expand...
Click to collapse
Cowboy, you are right...there are 5 providers in HK that have LTE... when I visited HK from China I was told only 中国移动 had it because that is what I have in China. My mistake. The firmware you list from SamMobile is incorrect...I have already tried contacting SamMobile about their error. If you install that firmware listed it will still say 4.1.1 as does the new release this morning. Taiwan and China also got the 4.1.1 update with their I9300. I guess the only option is the Singapore release to get 4.1.2 with Chinese localization at this point...IF that gets released to 4.1.2.
I also got the same thing with my Samsung Galaxy S3 GT-I9305 which I bought from ebay and it has the Hong Kong version (Baseband version I9305ZHALI2 & Build number I9305ZHBLL3) (Unrooted) with android 4.1.1 and when I connected my s3 I9305 to my laptop through the Samsung Kies it told me there is new update for my phone's frimware so I did that and every thing was fine but when I checked my phone the version is still 4.1.1 so I don't know what does that mean ?
Bandar.99 said:
I also got the same thing with my Samsung Galaxy S3 GT-I9305 which I bought from ebay and it has the Hong Kong version (Baseband version I9305ZHALI2 & Build number I9305ZHBLL3) (Unrooted) with android 4.1.1 and when I connected my s3 I9305 to my laptop through the Samsung Kies it told me there is new update for my phone's frimware so I did that and every thing was fine but when I checked my phone the version is still 4.1.1 so I don't know what does that mean ?
Click to expand...
Click to collapse
Still not sure myself. But I know HK got 4.1.1 originally a month after everyone else...so that means we should get 4.1.2 in February!!
Innis said:
Still not sure myself. But I know HK got 4.1.1 originally a month after everyone else...so that means we should get 4.1.2 in February!!
Click to expand...
Click to collapse
Hopefully that's coming soon, we will wait and see what will happen !
Bandar.99 said:
I also got the same thing with my Samsung Galaxy S3 GT-I9305 which I bought from ebay and it has the Hong Kong version (Baseband version I9305ZHALI2 & Build number I9305ZHBLL3) (Unrooted) with android 4.1.1 and when I connected my s3 I9305 to my laptop through the Samsung Kies it told me there is new update for my phone's frimware so I did that and every thing was fine but when I checked my phone the version is still 4.1.1 so I don't know what does that mean ?
Click to expand...
Click to collapse
Yeah its only a minor firmware update (16.--mb) to increase stability on 4.1.1, not a major update like 4.1.2. That should come pretty soon.
Yeah, there is 4.1.2 for other countries(I just saw that on SamMobile.
It wrote that Hong Kong has already had 4.1.2 , I'm sure it's a typing mistake.
Take a look at my attachment to see what I've seen.
Mitch_Faiz_555 said:
Yeah, there is 4.1.2 for other countries(I just saw that on SamMobile.
It wrote that Hong Kong has already had 4.1.2 , I'm sure it's a typing mistake.
Take a look at my attachment to see what I've seen.
Click to expand...
Click to collapse
Sammobile has been wrong about 4.1.2 since December (I have emailed them about this) ... all other repository Samsung sites list is as 4.1.1 NOT 4.1.2. So far no TGY firmwares on any Samsung device has been 4.1.2. I REALLY want 4.1.2 with Chinese localization and TGY is the only way! Except maybe MM1 (Singapore) but their localization is a little different than with Mainland China... hopefully TGY goes 4.1.2 soon... if you look at the most updated firmwares for I9305... you will see that TGY is updated more frequently than others...
Did anyone get the update to 4.1.2 for the TGY ???
chrisstavrou said:
Did anyone get the update to 4.1.2 for the TGY ???
Click to expand...
Click to collapse
No 4.1.2 TGY on any Samsung device yet. But there is hope... Hong Kong, China and Taiwan use the same build... and all are on 4.1.1 but yesterday Taiwan got 4.1.2 for the I9300. So hopefully it will be soon!
Innis said:
No 4.1.2 TGY on any Samsung device yet. But there is hope... Hong Kong, China and Taiwan use the same build... and all are on 4.1.1 but yesterday Taiwan got 4.1.2 for the I9300. So hopefully it will be soon!
Click to expand...
Click to collapse
Dear Colleague,
Other than the stock rom, you may consider to have the custom rom by WanamLite XXBLL5 V1.1 of which have
+Enabled all supported languages
+Multi CSC (+124)
and they should be closed to TGY
chrisstavrou said:
Did anyone get the update to 4.1.2 for the TGY ???
Click to expand...
Click to collapse
Just plugged in my I9300 into Kies and there was a prompt:
Current firmware version : PDA:LL1 / PHONE:LJ2 / CSC:LL1 (TGY)
Latest firmware version : PDA:MA1 / PHONE:LLA / CSC:MA1 (TGY)
Hope this is it!
clivechen said:
Just plugged in my I9300 into Kies and there was a prompt:
Current firmware version : PDA:LL1 / PHONE:LJ2 / CSC:LL1 (TGY)
Latest firmware version : PDA:MA1 / PHONE:LLA / CSC:MA1 (TGY)
Hope this is it!
Click to expand...
Click to collapse
Yes, it is 4.1.2 for TGY.
clivechen said:
Yes, it is 4.1.2 for TGY.
Click to expand...
Click to collapse
Hopefully I9305 4.1.2 follows soon now...
This is still 4.1.1, to fix the security bugs, I'm using this on my i9305.
Alfred
I'm using I9305, from Singapore, telco is Starhub..
also still 4.1.1... doesn't have any new update :crying:
Hi. What region (country) firmware of 2.3.6 is best for Galaxy Ace?
Deimis95 said:
Hi. What region (country) firmware of 2.3.6 is best for Galaxy Ace?
Click to expand...
Click to collapse
Your home country, generally speaking.
ApriliaM3 said:
Your home country, generally speaking.
Click to expand...
Click to collapse
And if that firmware of my home country doesn't exist? Or I'm an idiot that can't find it.
If you cant find firmware for your country then flash another(newest)...
Im from Serbia and i flashed firmware for Italia,because newest firmware was for Italian market
And it worked just fine
n0p3zz said:
If you cant find firmware for your country then flash another(newest)...
Im from Serbia and i flashed firmware for Italia,because newest firmware was for Italian market
And it worked just fine
Click to expand...
Click to collapse
You wanted to say that which is the latest update went to install?
Deimis95 said:
You wanted to say that which is the latest update went to install?
Click to expand...
Click to collapse
Yes,you can install newest firmware avaible on Samfirmware
n0p3zz said:
Yes,you can install newest firmware avaible on Samfirmware
Click to expand...
Click to collapse
Vietnam is the latest we'll see whether good or not. If not, I'll take the second most novelty and search for the best.
By the way, thanks.
Deimis95 said:
Vietnam is the latest we'll see whether good or not. If not, I'll take the second most novelty and search for the best.
By the way, thanks.
Click to expand...
Click to collapse
No problem
One more question. If looking for firmware in sammobile.com to those files are KIES icon, so that means, that this file can use with KIES program to install some update?
Use odin to flash firmware..
Kies is distrustful...
n0p3zz said:
Use odin to flash firmware..
Kies is distrustful...
Click to expand...
Click to collapse
Thanks again.
Hope will not cause more problems.
i just used odin to flash Iran new firmware on canadiantab s t-800 released on feb 3.worked like a charm.
jamesrfraser said:
i just used odin to flash Iran new firmware on canadiantab s t-800 released on feb 3.worked like a charm.
Click to expand...
Click to collapse
Quick question, did you get the Rom from Sam mobile? The only release for Iran I can find is for the T-700.
Yes sammobile Iran t 800 wifi version
Hello, how One ui 2.1 just release to India and europe A71, i want to no, if is possible change Panama OWO rom to India ODM new firmewire and how
India (INS)
PDA A715FXXU2ATG1
CSC A715FODM2ATG3
PANAMA (TPA)
PDA A715FXXU2ATE9
CSC A715FOWO2ATE2
I've got the same firmware Panama tpa.
I've been thinking the same but would like to change to a UK btu firmware.
My previous phone was the galaxy note 3 and it was possible then as long as the firmware was the right model. I went from xef to a polish version when android 5.1.1came out
i can confirm it works ive just flashed the polish firmware PANAMA (TPA).
now running one ui 2.1
Lip9571 said:
i can confirm it works ive just flashed the polish firmware PANAMA (TPA).
now running one ui 2.1
Click to expand...
Click to collapse
You Mean Poland XEO ?
brayhanrd said:
You Mean Poland XEO ?
Click to expand...
Click to collapse
yes
Lip9571 said:
i can confirm it works ive just flashed the polish firmware PANAMA (TPA).
now running one ui 2.1
Click to expand...
Click to collapse
how did you do that? did it required any special sacrifice related to Knox or something?
I'm interested in this as well, I'm on TPA also. Specifically
- which region firmwares have one ui 2.1 and can safely be flashed to a phone with TPA firmware
- steps to flash a different region's firmware using Odin
Thanks
-
Hi..
Is there an option that one region has AOD and other doesn't?
If there has, which region this?
Sorry about my poor English
Arikpas said:
Hi..
Is there an option that one region has AOD and other doesn't?
If there has, which region this?
Sorry about my poor English
Click to expand...
Click to collapse
I don't know if it depends on region, but you can just download some latest unbranded, non-carrier firmware (XEO, MEO, etc.) and that functionality should work.
nqnxev said:
I don't know if it depends on region, but you can just download some latest unbranded, non-carrier firmware (XEO, MEO, etc.) and that functionality should work.
Click to expand...
Click to collapse
Can you explain more? I just started with all that firmware.
Thanks
I don't know which Android version you currently have. You can download latest stock firmware for example here:
Download Samsung Galaxy A6 SM-A600F firmware
Download the latest Samsung firmware for Galaxy A6 with model code SM-A600F. Check out our free download or super fast premium options.
www.sammobile.com
Flash it then via Odin.
nqnxev said:
I don't know which Android version you currently have. You can download latest stock firmware for example here:
Download Samsung Galaxy A6 SM-A600F firmware
Download the latest Samsung firmware for Galaxy A6 with model code SM-A600F. Check out our free download or super fast premium options.
www.sammobile.com
Flash it then via Odin.
Click to expand...
Click to collapse
I have Android 10. I believe I'm using the latest version. But my phone doesn't have "Always On Display".
I saw In google that some regions has.
But what is it XEO or MEO that you mention? It could have AOD?
Arikpas said:
I have Android 10. I believe I'm using the latest version. But my phone doesn't have "Always On Display".
I saw In google that some regions has.
But what is it XEO or MEO that you mention? It could have AOD?
Click to expand...
Click to collapse
Just look at website I linked - that's Samsung country codes for firmware. So for example XEO is Polish "non-carrier" firmware, MEO is Portugese, PHN is Dutch, and so on. Try to flash one of them.
If you have unlocked bootloader then you can just flash some custom rom.