my galaxy ace had dust under the screen. to remove it, i disassembled the phone. I removed the dust between the glass and the screen, assembled the phone again and booted it up. But know the phone does not respond to any touch.
to find out what the problem is i'd like to know how the screen works. I believe that when I touch the screen, this is sent from the front glass to the 'phone', which makes the screen show the according view. So when the screen does not respond to me touching the screen i'd have to look for a new glass or could there be another problem?
i''ve cleaned the screen with lcd screen cleaner (on both sides because there was a fingerprint on it on the back side). I don't know if there was some sort of layer on the glass which could be removed by this cleaner, which actually would be essential for the touch function.
i hope someone can help me. I'd like to use this ace for a longer time...
DutchArjo said:
my galaxy ace had dust under the screen. to remove it, i disassembled the phone. I removed the dust between the glass and the screen, assembled the phone again and booted it up. But know the phone does not respond to any touch.
to find out what the problem is i'd like to know how the screen works. I believe that when I touch the screen, this is sent from the front glass to the 'phone', which makes the screen show the according view. So when the screen does not respond to me touching the screen i'd have to look for a new glass or could there be another problem?
i''ve cleaned the screen with lcd screen cleaner (on both sides because there was a fingerprint on it on the back side). I don't know if there was some sort of layer on the glass which could be removed by this cleaner, which actually would be essential for the touch function.
i hope someone can help me. I'd like to use this ace for a longer time...
Click to expand...
Click to collapse
http://www.youtube.com/watch?v=9gS5eE3j_ts
thanks! i've used that tutorial for replacing the broken screen my ace came with from my sister. I replaced it and then everything worked fine again. However ,after that screen replacement, there got dust under the screen which I tried to remove this afternoon.
The dust is gone, but the screen doens''t respond to anything now.
I'am wondering if i 'broke' the screen and I should get a replacement screen, or that i may have damaged the lcd screen (which is fine i think, it displays everthing perfectly). or maybe the glass is fine but some connector is defect (i've disassembled the phone again, checked everything and connected it again).
Hey there
I have an Asus rog phone 2 from last 3 months and it was working quite good but today I was using my Gmail and after 5 to 10 mins of use I locked my phone and put it on the table and when I opened it again after 5-6 mins its screen was showing black each and everything is working but the screen is black and I am not able to see anything whats going inside the phone. as it sometimes shows little bit screen at the bottom of the screen but sometimes its shows full black I don't know what's the problem as the phone screen is perfectly ok without any damages or scratches each and everything thing looks good but why this is happening ? does my phone will be cover under warranty by Asus as I don't think its any kind of physical damage so please let me know about the same
do you have double tap to wake on? I have found that helps.
I bought a screen of eBay which said it was OEM but who knows? Anyway I had the screen installed at a phone repair shop and it seemed to work fine until I walked out of the store and turned it on to notice that the screen was black and white. I turned it on and off again and it went back to normal but i went in to tell them anyway when i was walking in I turned the screen in and off a couple times to see if I could get it to go black and white again and sure enough if did. It seems to turn black and white every couple times I turn it on and off. It doesn't flicker back and forth and it doesn't charge when I'm using the phone also i had a custom ROM installed so I got rid of that to see if it would fix it it didn't and I reset the entire device to no avail but I did notice that to this point I haven't had it go black and white while in the boot-loader and i have tried a lot turning it on and off again and again. I also noticed that there are lines bouncing in the background when the screen is black and white which are also visible when the screen is normal but only barely. Apart from that the screen seems to shake when its in black and white and sometimes the touch wont work for a couple seconds its not a big deal because you can just turn the screen on and off to fix it but its a very strange problem i have contacted the seller and I talked to the man who installed it but I was wondering if it was possible that it was some kind of software issue it seems unlikely but the fact that it doesn't flicker on and off its just either on or off and the fact that i cant seem to get it to happen in the boot-loader is making me wonder I also tried recording my screen and the screen was recorded normally when it was black and white to me.
I replaced the screen on my phone a few weeks back and earlier today the screen was lifting so I removed it to re adhesive it. The screen was working perfectly fine before hand however now it is not giving a display signal. Me touching the screen still gives feedback but nothing on the display. The screen was on the same table as where I dismantled it. The screen had a bit of adhesive down the side of I used some 80% alcohol hand sanitiser to help remove it. Refit the screen and their is no display, been a fair few hours and still nothing. Swapped broken screen in and their is no display on that one either, Pls advise what could be the issue and how I could recover data as there is a password on the device.
Hello everyone there, I've bought a used OnePlus 7 pro a few days ago. But I'm having an issue with it.
Whenever I turn brightness to full, screen starts becoming small and big and small and big. I've tried turning adaptive brightness on and off, removing the screen protector, and rebooting into safe mode but nothing works.
I wanna know if the problem is with software or my phone's screen is damaged?
If this problem is with the screen then how the screen recorder is able capture it?