Hello Developers,
This is my First thread On Oneplus 6T, I was waiting for Official Release of Nethunter Kali OS for Oneplus 6T. But after Searching and Waiting for two years, I got a solution for this Problem. Has You all oneplus 6T is more similar to Oneplus 6, the only major difference between both of them is of the fingerprint: OP6T has onscreen fingerprint and OP6 has fingerprint on the back panel and Nothing else. So instead of wasting your precious time lets start installing nethunter on OP6T. Due to this similarities I tried to install oneplus 6 ROM on OP6T and voila it was successful and everything works fine.
Requirements
Root Your Oneplus 6T ( If you are a Total Beginner, You can use this tool named ALL IN ONE TOOL FOR OP6T, you can refer to the given link for further instructions, just keep in mind use updated magisk and updated Twrp files while flashing.)
You can Download Magisk version 21.4 From here.
Download Oneplus 6 Nethunter Rom From the Official Site ( According to the OS running on your OP6T ) Nethunter For ONEPLUS 6/6T
Unlocked Bootloader ( You can use the All In One Tool For this Purpose Also, whole data would be deleted while unlocking Bootloader. )
Custom Recovery To Flash The Nethunter OS ( TWRP )
Stock OP6T OS & Stock Kernel
From Oxygen OS to Nethunter OS
Root Your Oneplus 6T
Boot To TWRP
Do A Factory Data Reset ( Not Recommend, Totally Depends On You has, of phone is wiped while unlocking bootloader) :-- Optional
Flash The Downloaded Nethunter OP6 Rom on your OP6T.
Flash Gapps If you need : - Optional. ( No Need To Flash Magisk Has, while flashing nethunter in recovery it says the same: Magisk is available no need to reinstall )
Check The Slot the Rom have been Flashed On Slot A.
Reboot Recovery And Check Whether The Slot has Changed. ( Has i Saw on forums that, the slot should be changed and we have to reflash the custom os to run seamlessly, but this is not the case. you can continue if the slot is not changed, has i try to reflash and the slot was not changed, but I am able to use my OP6T with Official Nethunter ).
If the Slot Has been Changed, Reflash the Nethunter Zip on slot B.
Similarly Install Gapps On Second Slot also If you want .
Then Boot Your Oneplus 6T and Open Nethunter App And Install chroot has per your need. ( I have installed Minimal chroot and each function are running without any problem, I am able to put my internal wifi SOC in monitor mode, I am able to use wifite, airmon-ng to monitor wifi, it is less powerfull but we can use it).
If after Flasing the Nethunter OS and booting Your OP6T has some errors, such as unable to install chroot or nethunter app not running just do a factory reset from TWRP and boot your phone, finish the setup process and all set to go..! Your Nethunter Rom is ready to use..
If you are using a custom OS, I Will suggest you to flash Oneplus 6T stock firmware And Then Follow The Same Procedure.
But my phone is encrypted, what should I do?
The official nethunter build says it works on lineage 19.1 but it's the same kernel as oos11 build and which modified some code and dt2w and fast charging doesn't work so I rebuilt the kernel based on up to date lineage sources with everything working, now unofficial aospa is available i built a nethunter kernel for it but it uses dynamic partitions and I cannot keep the phone decrypted and therefore kali cannot read storage, dm verity disabler doesn't work anymore and neo-dfe doesn't either, does anyone know how to keep 6t decrypted on a13 dynamic partitions?
Related
after trying and testing almost all roms on my device, i can conclude, there is no better rom than oxygen os (for my usage)
every time i install oxygen os, it encrypts my device, there's got to be a way to install it without losing my internal storage device data
pls help me do it :fingers-crossed::fingers-crossed::fingers-crossed::fingers-crossed::fingers-crossed::fingers-crossed:
You can do it by 3 different way:
1. Flash OOS and flash an OOS compatible 3rd party kernel available in XDA (blu_spark for example).
2. Flash OOS and flash patched OOS kernel for that same version available in XDA.
3. Flash through Redwolf TWRP which has inbuilt non-encryption patch.
Thanks
[ HELP I have researched everywhere on the internet and I'm not sure what to do. I have a REDMI 4A wit AEX ROM OREO8.1 installed, TWRP 3.2.2.0 Official (for Redmi 4A on the twrp website) and tried to flash Magisk v.16. Error 1 mount vendor shows up in twrp. Many YouTubers says I should flash boot.img. I've already flashed the boot.img of the given AEX ROM OREO 8.1, but the same error occurs. I tried to search for answers, and what I found was that apprently aosp oreo ROMs usually are Treble ROMs. Downloaded Termux app and checked if ROM was treble = false = NOT Treble! Then others say I have to flash a modded vendor version of twrp. (Link: (add Https here)//androidfilehost.com/?fid=674106145207489212) Haven't tried it out just wanted to make sure if I should or not, bacuse the last time I tried to flash a different twrp, I had to flash the original one back using ADB...
Btw I had given up at some point and I flashed SuperSU successfully. Why Can I flash SuperSU but not Magisk?? I fully unrooted SuperSU and am ready to try flashing Magisk again. If anyone has any idea how to fix this, pleeeeeease tell me I need Snapchat to work while having root (yes I know I could've used Titanium Backup but that not the point rn)
Thanks in advance!!!
Austin:fingers-crossed:
Yup, you must use TWRP Vendor if you want to use magisk in AEX Oreo.
Han usb Deccan if DHC dry j
Wrong section.
Install TWRP Pitch Black, then install magisk for treble rom
That version may have bugs try the newer versions
Try with Pitch Black recovery or Orange Fox recovery
Same for me and than i using BATIK Recovery for fix it
Solved Magisk error!
I've tried so many Recoveries and after trying more than 5 recoveries and about 7 Different ROM I finally got the answer.
So basically now that Redmi 4A is treble based, hence it has now a new Partitioning vendor based. For that you'll need new Recovery that support vendor mounting. I've tried the other Recoveries mentioned above and all of them are buggy. Go for the official TWRP vendor based Recovery. I found it here :
https://freaksterism.blogspot.com/2018/10/solved-cannot-mount-vendor-magisk.html?m=1
The steps are explained purely for Redmi 4A.
Use pitchblack recovery and all the problems will fix or install supersu and install magisk apk, grant root and install directly and then you can uninstall supersu with unsu zip
TREBLE COMPATIBILITY FOR YUREKA BLACK (Tinno p7201)
Guide and Vendor Zips Should work on Tinno p7201 clones - Wiko U feel prime , Blu Life One X2 mini, and Cect Digi U
Disclaimer:
WARNING, IT REPARTITIONS THE DEVICE SO DONT FLASH ON LOW BATTERY.
IF YOU DON'T KNOW WHAT UNLOCKING IS OR WHAT A PARTITION IS , BETTER NOT USE THIS.
!!! Whatever you do, it is at your own risk !!!
*************************************************************************************************************
How to Install
Flashing recovery
1. Flash Treble TWRP recovery given in downloads (important).
2. Reboot to recovery.
Re-partition & Treblize Device
Flash Treble Partitioner tool edited for Yureka Black in treble recovery. (Important Note: Only use the recovery given for download in next post (Twrp that has orange accents and splash) and the tool works properly only in it. Use this recovery whenever you use this tool. You can change recoveries later. Use of other recoveries to flash partition tool can put phone in a no-OS state).
Follow the on screen instructions while using tool.
Reboot to recovery.
Wipe System and Vendor.
If system or vendor aren't mounting change their filesystem to ext4.
Reboot to recovery.
From now you can flash Roms with Twrp or Any other recently built recovery ( Any treble twrp, Official twrp in twrp.me/ Pitch black recovery or (Twrp that has orange accents given after this post)).
GAPPS and MODS work properly only when flashed with latest recoveries and I don't maintain them.
All actions performed here are reversible.
As far as i know, everything here has been used > 100 times for several years and works.
If you want to flash GSI
Flash the Rom zip
Wipe system, Flash the GSI image to system & wipe data.
GSIs don't boot on android 11 right now. Please contact your Rom/Os maintainer for device and ask them to fix it.
*************************************************************************************************************
IMPORTANT:
For ERROR: 7 & in TWRP on flashing non treble roms.
Garlic was not released with treble ! Non treble Roms which are based on android 10 and prior for garlic CANNOT be flash after partitioning,
You need to remove vendor using partitioning tool again on partition tool required recovery.You can then flash non treble Roms like before or change recoveries.
*************************************************************************************************************
Credits----Source Maintainers & Co
Treble Party Tool:- @Oki - For TREBLE - PARTY TOOL --@someone755 for the keycheck binary--- @Zackptg5 for the V4A install script.
Recovery----Teamwin&Team
Give me a thumbs-up if it helped you
DOWNLOADS IN NEXT POST
DOWNLOADS
PARTITION TOOL
TREBLE TWRP
MORE HELP
Does it require Data Format?
No
What GSI can boot?
All GSI depending on Oreo or Pie depending on respective vendors along with Sgsi like MIUI,Zui, OOS and other Sgsi ports. No GSI will boot on Android 11 (Ask device maintainers).
Why are non treble custom roms no longer flashing?
Because custom roms are made for 4.7gb system , unless the dev mentions 3.7gb system , they cannot be flashed along with treble.
If you want to revert to non-treble custom roms..
Reflash the Party tool and choose option to remove vendor partition.
I'm on Android Nougat (7.1.1) and have a Wiko U Feel Prime.
Am I able to flash this treble or do I need a 8.0 custom ROM to enable treble.
Also can I flash any gsi I found out there or do I need a specific gsi for this since it isn't an originally supported treble device
Noobyguy said:
I'm on Android Nougat (7.1.1) and have a Wiko U Feel Prime.
Am I able to flash this treble or do I need a 8.0 custom ROM to enable treble.
Also can I flash any gsi I found out there or do I need a specific gsi for this since it isn't an originally supported treble device
Click to expand...
Click to collapse
Hello , there are standalone vendor zips in the post .First you need to repartition , after doing it you dont need a custom treble rom, flash my treble twrp, then just flash the vendor zip + bootimage and any GSI (pie GSI for pie vendor and Oreo GSI for oreo vendor) after wiping data.GSIs are not bug free. If you have any doubts/want to know the latest development going on the device, I strongly suggest you to join the telegram group, there are few wiko u feel prime users in our group.
After some time I got a second Axon 10 and I spend some time figuring out what was possible with this phone in terms of root, custom ROM etc.
My results are as follows.
What is working:
Android 9 + Magisk and TWRP
Android 9 + TWRP + Custom ROMs (LineageOS 16 and patched GSI)
Android 10 + Magisk and TWRP
Android 10 + Magisk and MicroG flashed via Magisk (= stock ROM without Google Services)
Android 11 + Magisk
What is not working:
Android 11 + Magisk + TWRP (TWRP logo flashes randomly but TWRP does not load).
Android 11 + Magisk + MicroG (the nanolx patching script does not work with Android 11 as of yet)
Encryption in Custom ROMs
Method to flash files via EDL
Unzip / unrar my files into the backup\full folder of the EDL tool and choose restore + full in the tool.
Unlock Bootloader:
Before you try any of the files, you MUST unlock your bootloader!
BACKUP of your data as it will be lost!
Download the EDL tool from this Thread
If your phone is not on android 9, you must go back to Android 9 first. e.g. by using my Android 9 1.9 backup.
After you restored it, restart while holding the volume + key and do a factory reset / format data.
Boot into EDL again and unlock the bootloader.
Now you are on android 9 with unlocked bootloader.
From here you can follow the other guides in the form and install TWRP or lineageos. Or flash one of my files below.
Flashing EDL files:
Unzip / unrar my files into the backup\full folder of the EDL tool and choose restore + full in the tool.
I put all my files into this MEGA account: MEGA
Android 10 version 2.9 Magisk + TWRP
Android 11 version 3.5 stock
Android 11 version 3.5 Magisk
Android 10 version 2.10 stock
Android 10 version 2.10 Magisk (TWRP can be flashed with Magisk)
Install MicroG:
Only works on Android 9 and 10.
Before you install MicroG you must patch the stock ROM to allow for signature spoofing.
The patcher script I used is on https://downloads.nanolx.org/NanoDroid/Stable/ When I write these lines the up-to-date-version is NanoDroid-patcher-23.1.2.20210117.zip
Reboot.
Install MicroG from the Magisk repository.
After a restart there will be error messages that google apps keep crashing. With each warning, disable the apps one by one.
When you reboot again, no errors should appear and MicroG should report that it is fully working.
You can add the Bromite Framework and give F-droid system rights. Both are available from the Magisk repo.
Updates will likely install the Google apps again and uninstall Magisk...
Revive phone:
Not really related, but I bricked my phone several times.
If your phones does not boot anymore or hangs in a bootloop, try accessing the EDL mode.
The easy way:
Boot while holding volume -
The hard way:
Old Volume +, volume - and power until you end up in EDL. The screen will be black, so it helps if you have the Phone connected to Windows and can hear the system sound when the USB sees a connection.
In anyway you can then use the EDL tool to restore / flash an EDL image.
On custom ROM support:
Well there is LineageOS 16 by Unjustified Dev. https://forum.xda-developers.com/t/rom-unofficial-zte-axon-10-pro-9-lineageos-16-0.3992127/ It works well. But has a patch level that is outdated by now.
On top of it you can install the GSI ROMs created by Rafyvitto. The latest one is Resurrection Remix https://forum.xda-developers.com/t/...nofficial-resurrection-remix-q-8-6-7.4172527/
with a security patch level of mid 2021. Which is recent enough to use. The stock roms are not much better.
With both Custom ROMs, encryption is not working which poses a privacy/security risk when your phone is stolen. Do not forget that your phone does not only contain your photos and data but also your passwords to your accounts.
Added Android 10 2.10 files.
Its nice to see anything new for this phone. I wish I can use these roms but I have the American version.
Hi and thanks for your work and your files.
I'm stuck on "Loading the programmer: prog_ufs_firehose_sdm855.elf >>>", if I try to recover your edl files with EDL Tool, v 3.25.
I have to choose option 2: "Restore Full EDL from backup", right?
Is there a way to check if the bootlaoder is really unlocked?
Thanks in advance
OK, I was able to solve the problem with the "programmer" and try the backups. The next step was almost clear. The device is stuck in bootloop. I've already tried all the backups I could find on Mega. After the EDL Tool has done its work and the device has restarted, the mobile phone goes into the boot loop. And now? So the starting position was: Android 9 with an open bootloader. Maybe someone has an idea?
After I couldn't get the device out of the bootloop, I flashed the A2020G_PRO_V1.6_FULL_EDL via MiFlash and then did an OTA update to 1.8.
Then I tried unlocking the bootloader again, which unfortunately didn't work. The flash is carried out without errors, but the device then apparently does not start in the desired Fastboot mode.
Thanks for your guide. However am I missing something with the Android 11+Magisk installation? I restored all the correct files and everything flashed correctly, however upon reboot there is no Magisk installed anywhere. Did a factory reset after the flash and still not there. Tried installing Magisk via his github and tried patching the boot.img again and it says success but after rebooting it says Magisk is not installed.
brian117 said:
Thanks for your guide. However am I missing something with the Android 11+Magisk installation? I restored all the correct files and everything flashed correctly, however upon reboot there is no Magisk installed anywhere. Did a factory reset after the flash and still not there. Tried installing Magisk via his github and tried patching the boot.img again and it says success but after rebooting it says Magisk is not installed.
Click to expand...
Click to collapse
Maybe you need to switch the slot in TWRP. It sounds as if you install it to the other slot (like A) an then boot B. Or vice versa.
Let the sm-t505 directly apply what it says about it
Link: https://forum.xda-developers.com/t/...ashing-guide-updated-android-13-gsis.4423297/
hello to all of you, the special rom (gsi rom) that you have been waiting for a long time has arrived.
note: custom rom is full port action, gsi rom is just to install system and sm-t500 sm-t505 and sm-t507 all gsi roms and twrp are compatible with each other
i will show you how to install gsi rom
1-) download original software latest version (one ui 4) from here
Sm-t507 link: https://samfw.com/firmware/SM-T507/TUR
Sm-t500 link : https://samfw.com/firmware/SM-T500
2-) Unlock your device's bootloader from the link I gave and create magisk root and flash it from od (it will be out of warranty)
Link: https://forum.xda-developers.com/t/...4-unlock-bootloader-root-with-magisk.4185993/
it may say sm-t500 or sm-t505 there, but sm-t507 is also compatible and apply magisk root to your own software, not the software written there
3-) if root is installed download sm-t500 twrp from here sm-t507 and sm-t505 are also compatible
4-) Do all the gsi installation instructions in the link I will give and use the only gsi I said, the others are likely to not work
Link: https://forum.xda-developers.com/t/...ashing-guide-updated-android-13-gsis.4423297/
the gsi I recommend and their links
1-) lineage os gsi 19x no restart but brightness correction magisk module is required
link: https://sourceforge.net/projects/an...IAL-arm64_bgN-vndklite-secure.img.xz/download
2-) lineageos 20 td restarts every minute restart corrector + brightness corrector solved with magisk module
Link: https://sourceforge.net/projects/an...IAL-arm64_bgN-vndklite-secure.img.xz/download
3-) the best and most perfect pixel experience rom automatically restarts, restart corrector and brightness corrector solved with magisk module, just install the slim version
Link: https://github.com/ponces/treble_build_pe/releases
4-) our most feature gsi rom, evolution x, is not very stable, we hope it will be fixed in the new update, it will restart automatically, restart blocker and brightness regulator magisk module is required, install the slim version or it will not be installed
Link: https://github.com/ponces/treble_build_evo/releases
5-) It is almost the same as aosp lineageos 19, only the brightness cannot be fixed and magisk cannot be installed, it has an internal root, install the vndklite gapps version, if magisk and brightness are required, the vndklite gapps secure version will automatically restart and the installation will be solved with the magisk module
Link: https://github.com/phhusson/treble_experimentations/releases
6-) google gsi is the most perfect but least featured gsi no magisk module needed, not even magisk needed install arm64 + gms version
Link: https://developer.android.com/topic/generic-system-image/releases
7-) one ui 5 nippon
problems
samsung camera not working use other camera apps
developer options freezes flash the following 2 magisk modules
If you touch the screen on the lock screen before it is fully opened, wait for it to turn off again (it will not freeze if there is no password)
big icon and big keyboard (only tablet like this)
No charging animation when device is off (like lineageos gsi)
freezing on heavy games
samsung tablet search not working
sometimes boot problem when installing magisk module flash the magisk module below
Note:
workaround: if a screen says the device is locked, turn off the screen a few times and turn it on again if it doesn't work, restart it
Thanks nippon gsi and Hausemaster
some google translation errors
Link : https://sourceforge.net/projects/ni...-5.0-AB-13-20230102-NipponGSI.img.gz/download
the best i recommend
One ui 5 , Pixel experience, cherish os ,evolution x and google gsi are the best
all donations belong to Hausemaster
you can ask your questions to Hausemaster and me
only valid for sm-t507: When installing magisk boot and vbmeta, which I have prepared for those who cannot root, add it to the home csc section while installing the software from odin, choose either one and install it. If you want to install vbmeta, there is a separate link.
note: twrp won't work without vbmeta
hello finally one ui 5 gsi debload version is out I tested it today it really worked
old one was not working because other users changed nippon gsi (no vendor relevance)
Most of the apps in this gsi have been removed, galaxy store samsung camera and many more apps have been removed
no boot loops all features are working now i'm using one ui 5 it's pretty fast
problems
When Magisk installs a module, the phone stays on a locked screen and does not recover. Do not install a Magisk module!
eye shield not working
sometimes developer options not working issue (I accidentally fixed this issue but I don't know how I fixed it)
big icon and big keyboard (only tablet like this)
note: if a screen says the device is locked, turn off the screen a few times and turn it on again if it doesn't work, restart it (this method will not work if you use magisk module)
some google translation errors
Link : https://sourceforge.net/projects/ni...loat-AB-13-20230102-NipponGSI.img.gz/download
ismail demirbaş said:
Let the sm-t505 directly apply what it says about it
Link: https://forum.xda-developers.com/t/...ashing-guide-updated-android-13-gsis.4423297/
hello to all of you, the special rom (gsi rom) that you have been waiting for a long time has arrived.
note: custom rom is full port action, gsi rom is just to install system and sm-t500 sm-t505 and sm-t507 all gsi roms and twrp are compatible with each other
i will show you how to install gsi rom
1-) download original software latest version (one ui 4) from here
Sm-t507 link: https://samfw.com/firmware/SM-T507/TUR
Sm-t500 link : https://samfw.com/firmware/SM-T500
2-) Unlock your device's bootloader from the link I gave and create magisk root and flash it from od (it will be out of warranty)
Link: https://forum.xda-developers.com/t/...4-unlock-bootloader-root-with-magisk.4185993/
it may say sm-t500 or sm-t505 there, but sm-t507 is also compatible and apply magisk root to your own software, not the software written there
3-) if root is installed download sm-t500 twrp from here sm-t507 and sm-t505 are also compatible
4-) Do all the gsi installation instructions in the link I will give and use the only gsi I said, the others are likely to not work
Link: https://forum.xda-developers.com/t/...ashing-guide-updated-android-13-gsis.4423297/
the gsi I recommend and their links
1-) lineage os gsi 19x no restart but brightness correction magisk module is required
link: https://sourceforge.net/projects/an...IAL-arm64_bgN-vndklite-secure.img.xz/download
2-) lineageos 20 td restarts every minute restart corrector + brightness corrector solved with magisk module
Link: https://sourceforge.net/projects/an...IAL-arm64_bgN-vndklite-secure.img.xz/download
3-) the best and most perfect pixel experience rom automatically restarts, restart corrector and brightness corrector solved with magisk module, just install the slim version
Link: https://github.com/ponces/treble_build_pe/releases
4-) our most feature gsi rom, evolution x, is not very stable, we hope it will be fixed in the new update, it will restart automatically, restart blocker and brightness regulator magisk module is required, install the slim version or it will not be installed
Link: https://github.com/ponces/treble_build_evo/releases
5-) It is almost the same as aosp lineageos 19, only the brightness cannot be fixed and magisk cannot be installed, it has an internal root, install the vndklite gapps version, if magisk and brightness are required, the vndklite gapps secure version will automatically restart and the installation will be solved with the magisk module
Link: https://github.com/phhusson/treble_experimentations/releases
6-) google gsi is the most perfect but least featured gsi no magisk module needed, not even magisk needed install arm64 + gms version
Link: https://developer.android.com/topic/generic-system-image/releases
7-) one ui 5 debload nippon
problems
When Magisk installs a module, the phone stays on a locked screen and does not recover. Do not install a Magisk module!
eye shield not working
sometimes developer options not working issue (I accidentally fixed this issue but I don't know how I fixed it)
big icon and big keyboard (only tablet like this)
note: if a screen says the device is locked, turn off the screen a few times and turn it on again if it doesn't work, restart it (this method will not work if you use magisk module)
some google translation errors
Link : https://sourceforge.net/projects/ni...loat-AB-13-20230102-NipponGSI.img.gz/download
the best i recommend
One ui 5 , Pixel experience ,evolution x and google gsi are the best
all donations belong to Hausemaster
you can ask your questions to Hausemaster and me
Click to expand...
Click to collapse
I already have Pixel EX 20 installed, but don't like the Pixel launcher. What do I need to do to install this one instead? Just wipe factory reset, flash this ROM and Magisk?
lewmur said:
I already have Pixel EX 20 installed, but don't like the Pixel launcher. What do I need to do to install this one instead? Just wipe factory reset, flash this ROM and Magisk?
Click to expand...
Click to collapse
This worked.
HINT: For those who, like me, have a hard time using magisk to flash the watchdog and brightness fix zip, when you first boot the ROM, keep the USB cable plugged in and be ready to hold the power and vol up button as soon as the screen blanks. This will boot back into TWRP and you can flash the zip from there.
updated 3 times
One ui 5 gsi to all samsung
no boot loops all features are working now i'm using one ui 5 it's pretty fast
problems
samsung camera not working use other camera apps
sometimes developer options not working issue
If you touch the screen before it is fully opened on the lock screen it will turn off again just wait
big icon and big keyboard (only tablet like this) Let's wait until one ui 5 tablet gsi comes out
Note:
workaround: if a screen says the device is locked, turn off the screen a few times and turn it on again if it doesn't work, restart it
permanent solution : delete system knoxGuard (lucky patcher recommended)
Thanks nippon gsi and Hausemaster
some google translation errors
Link : https://sourceforge.net/projects/ni...-5.0-AB-13-20230102-NipponGSI.img.gz/download
one ui 5 magisk module issue resolved in magisk delta canary latest update
Hi! I'm new and my english very bad. Google translate do bad translate for this messages. Maybe you are a Turk. Can you explain to me in Turkish? thanks.