An hour ago i have changed my customization number in build.prop to get updated and now my phone fails at restarting. after sony logo a blank screen comes up and then phone restarts again. boot animation don't show up.
Actually i didn't rooted phone. Like didn't fully root. An exploit that does it without unlocking bootloader. I was able to run root required apps but when i was trying to mount r/w mode, the phone was restarting itself before i do something. So i copied build.prop to another place, changed it, then in root explorer copied to /system. I managed it to owerwrite before phone restarts. When phone shutted down, didn't open, stucked at that point. Keeped restarting.
I know a lot of questions, topics opened about this but almost every solutions says that "repair over sony pc comp" or "repair over SUS". I tried both but in pc comp, program couldn't find my phone because it's turned off. when i open phone and connect wire it finds the phone but before pc comp finishes connecting phone restarts again. And in the SUS, i managed it to go into flash mode (volume down key and then connect.) It has found the phone (however green light didn't come out, no LED color was there) and SUS said there is no update for my phone, it's up to date. There is no repair button.
Besides there is another solution, flashtool. Will i lose my data if i use flashtool? I'm able to go into fastboot mode (blue light).
What can I do?
Update
Guys i can't belive now... Somehow i installed CWM recovery on my bricked xperia z. Now taking backup but the problem is when i connect to adb when phone is in CWM recovery mode i can't reach internal sd. WHY???
Hi ,
I am new on this forum so sorry moderators if i have posted this where i shouldn't have . I recently got a ZTE NUBIA Z9 Mini and i wanted to root it so tried different methords and somehow i managed to soft brick it or as they say its in a bootloop. Whenever i try to boot the phone with volume up button + power button just the home screen nubia logo appears and it stays there. I am absolutely clueless what to do ... followed some youtube videos to flash new rom using fastboot but apparently it needs back up files which i don't have .
Someone please help me
Thanks !
Possible Fix?
Hey have you tried to boot to recovery? it can depend where you brought it from. I got mine directly from the nubia store on thier website and it came rooted with a recovery system already in place, i had the same issue as you I booted into recovery power+vol down downloaded the rom again or most up to date rom from the website or in my case needroms website . Then i just installed the rom from update on the sd card View attachment 3357925 then it took about 3-5 mins to install and i rebooted it. View attachment 3357928 After this it should be as normal like flashing any rom onto any android device then wolla done even all my apps and data remained safe because it was only a software update flashed over.
DHASSIJA7 said:
Hi ,
I am new on this forum so sorry moderators if i have posted this where i shouldn't have . I recently got a ZTE NUBIA Z9 Mini and i wanted to root it so tried different methods and somehow i managed to soft brick it or as they say its in a bootloop. Whenever i try to boot the phone with volume up button + power button just the home screen nubia logo appears and it stays there. I am absolutely clueless what to do ... followed some youtube videos to flash new rom using fastboot but apparently it needs back up files which i don't have .
Someone please help me
Thanks !
Click to expand...
Click to collapse
tre251 said:
Hey have you tried to boot to recovery? it can depend where you brought it from. I got mine directly from the nubia store on thier website and it came rooted with a recovery system already in place, i had the same issue as you I booted into recovery power+vol down downloaded the rom again or most up to date rom from the website or in my case needroms website . Then i just installed the rom from update on the sd card View attachment 3357925 then it took about 3-5 mins to install and i rebooted it. View attachment 3357928 After this it should be as normal like flashing any rom onto any android device then wolla done even all my apps and data remained safe because it was only a software update flashed over.
Click to expand...
Click to collapse
I have the same problem.
If I press volume - and power device doesnt go to recovery, it just show Nubia logo on the screen for a while, then screen is black, That is all. If I plugg it into PC, computer can see one part of partiition with -Image- directory and a few unreadable partitions..
Do you know what to do, please????
majklB said:
I have the same problem.
If I press volume - and power device doesnt go to recovery, it just show Nubia logo on the screen for a while, then screen is black, That is all. If I plugg it into PC, computer can see one part of partiition with -Image- directory and a few unreadable partitions..
Do you know what to do, please????
Click to expand...
Click to collapse
Don't do nothing I had the same bug here with the logo Nubia again and again.
Just let the phone discharging itself (as you can't remove the battery).It will take around 24 hours.
Put an official rom on your sd card.
When the battery is out (try to power and if nothing happens it's good) just plug your phone to charge (not on pc) and try to go to the recovery.It should works.
Then load the official rom and after you will restore your backup (if you have one).
Jeff72fr said:
Don't do nothing I had the same bug here with the logo Nubia again and again.
Just let the phone discharging itself (as you can't remove the battery).It will take around 24 hours.
Put an official rom on your sd card.
When the battery is out (try to power and if nothing happens it's good) just plug your phone to charge (not on pc) and try to go to the recovery.It should works.
Then load the official rom and after you will restore your backup (if you have one).
Click to expand...
Click to collapse
I tried this already, just without sd card. Problem is, that I cannot go to recovery. If I press volume - and power I'll get just on logo screen, nothing else...
If I plug completely discharged phone on charger and press nothing, then just charging procentage appear for a while and then is dead again.
you can use one-click-tool.
first you switch off your.....try two or three times....or try again and again ....if you switch off your fone....then try to switch on in to fastboot....i have downloaded a fast boot rom..........1.16 version........extract the downloaded folder then first you click on ....z9 mini app in this folder.....and connect your mobile to pc......its start in automaticly.......wait for restart.......ohla....your mobile runs....https://drive.google.com/file/d/0B14zmeE7OLybaW5KWS1rME1Fd0U/view?usp=sharing
Problem solved!!!
This helped:
- Use a fast microSD card and copy on the root folder the original Nubia ROM (you can download it on the first page of this thread)
- Insert this microSD card into the phone
- Turn on your phone and let the battery completely discharge
- When the phone is turned off, press and hold Volume - than connect your AC adapter (USB cable connected to PC does not work), en Should start in bootloader menu
- If you can successfully start the bootloader menu, run the phone into recovery mode and than install the rom from external sd card
At the moment there is not any tool or bin format image for this phone
majklB said:
Problem solved!!!
This helped:
- Use a fast microSD card and copy on the root folder the original Nubia ROM (you can download it on the first page of this thread)
- Insert this microSD card into the phone
- Turn on your phone and let the battery completely discharge
- When the phone is turned off, press and hold Volume - than connect your AC adapter (USB cable connected to PC does not work), en Should start in bootloader menu
- If you can successfully start the bootloader menu, run the phone into recovery mode and than install the rom from external sd card
At the moment there is not any tool or bin format image for this phone
Click to expand...
Click to collapse
where is the rom?
Hi @ all.
I have managed this problem using volume up and power button. After first bootscreen hold the on button and wait until the second boot screen turn of. Release all keys!
Thats all.
The smartphone is off and you can return to recovery.
z9minimal
majklB said:
Problem solved!!!
This helped:...
-
Click to expand...
Click to collapse
Thanks a million, it saved my phone
Hello everyone!
I had the bootloop problem and I could solve it following your recommendations. My problem is that the original ROM installation process was suddenly stopped (I don't know exactly why) and now I have no access to the OS. Everytime I reboot it, the system goes to the bootloader showing this message:
Bootloader Menu
You entered this screen because:
No kernel (boot partition is bad)
Now you are in fastboot mode
The phone is fused
Then I have access to TWRP or to the original Nubia recovery, but I can't install a new ROM. I can restore backups but when I restart the system it goes to the bootloader menu again. Any solution for this issue?
Thank you in advance!
Problem solved!
oleg1980 said:
Hello everyone!
I had the bootloop problem and I could solve it following your recommendations. My problem is that the original ROM installation process was suddenly stopped (I don't know exactly why) and now I have no access to the OS. Everytime I reboot it, the system goes to the bootloader showing this message:
Bootloader Menu
You entered this screen because:
No kernel (boot partition is bad)
Now you are in fastboot mode
The phone is fused
Then I have access to TWRP or to the original Nubia recovery, but I can't install a new ROM. I can restore backups but when I restart the system it goes to the bootloader menu again. Any solution for this issue?
Thank you in advance!
Click to expand...
Click to collapse
Hi again!
I finally could flash the official ROM via TWRP. Initially I was trying to flash this ROM from the SD card, but the installation didn't work neither with TWRP nor with Nubia recovery. Then I copied the ROM to the internal storage and flashed it with TWRP with no more issues. Hope this information is useful for other members.
Thank you!
oleg1980 said:
Hello everyone!
I had the bootloop problem and I could solve it following your recommendations. My problem is that the original ROM installation process was suddenly stopped (I don't know exactly why) and now I have no access to the OS. Everytime I reboot it, the system goes to the bootloader showing this message:
Bootloader Menu
You entered this screen because:
No kernel (boot partition is bad)
Now you are in fastboot mode
The phone is fused
Then I have access to TWRP or to the original Nubia recovery, but I can't install a new ROM. I can restore backups but when I restart the system it goes to the bootloader menu again. Any solution for this issue?
Thank you in advance!
Click to expand...
Click to collapse
oleg1980 said:
Hi again!
I finally could flash the official ROM via TWRP. Initially I was trying to flash this ROM from the SD card, but the installation didn't work neither with TWRP nor with Nubia recovery. Then I copied the ROM to the internal storage and flashed it with TWRP with no more issues. Hope this information is useful for other members.
Thank you!
Click to expand...
Click to collapse
Hi once again, dudes!
As I told you this morning, I finally managed to fix my problem with the no-kernel message. However, after the reboot, I have lost wifi and bluetooth connections. When I turn on the wifi it doesn't even search for available networks. I have tried with official ROMs 1.16 and 1.19 and with a custom multilanguage ROM, doing factory reset (sometimes even system formats) before each ROM installation. Everything is working properly but I can't turn on the wifi and bluetooth.
Any idea or solution? Thank you very much!
Solution to WiFi and Bluetooth problems
Just to let you know that I finally managed to solve my problem with WiFi and Bluetooth. I got a backup of the 'persist' partition from a colleague's Z9 mini that worked perfectly and restored it in my device via TWRP.
RAW format image caputure
hi guys,
Since Nubia Z9 Mini runs on Android 5.0 (Lollipop version) with latest Camera 2 APIs with Manual control over camera, would like to know if the default Camera App supports Image capturing in RAW format.
Also can we use third party application like Camera FV-5 which supports RAW format image capturing feature in Nubia Z9 Mini,
Since you guys are users of Nubia Z9 Mini, pls. confirm this for me..
Thanks in advance..
Jeff72fr said:
Don't do nothing I had the same bug here with the logo Nubia again and again.
Just let the phone discharging itself (as you can't remove the battery).It will take around 24 hours.
Put an official rom on your sd card.
When the battery is out (try to power and if nothing happens it's good) just plug your phone to charge (not on pc) and try to go to the recovery.It should works.
Then load the official rom and after you will restore your backup (if you have one).
Click to expand...
Click to collapse
And how do you let the phone discharging itsel if the initial screen with nubia logo dissappears after a few seconds???
It won't discharge itself because it switchs off every time.
Anyone can tell me what to do?
Thank you.
Problem with Nubia Z9 mini
I've had this phone for 1 month and installed this ROM - http://forum.xda-developers.com/general/rooting-roms/rom-nubia-z9-mini-nx511j-rom-twrp-t3142204
Phone was working perfectly fine this morning but I noticed it had only about 30% battery left so I tried to charge it and it wouldn't charge? Tried computer cable, original Nubia cable and even others and nothing charged the phone. So decided to restart the phone to see if this fixed it and now the phone is just stuck on Nubia home screen . Can't restart or turn off or anything.... If i press volume down and power button it makes the screen print/camera sound and that's all i can do.
I'm not the most technical with all the mobile software stuff ect but can manage if guided
Also the phone is becoming really hot
Would greatly appreciate some help with this
thanks
I have a different problem here . I had stock ROM (India) when I purchased. Very laggy. I rooted, loaded TWRP, put MIUI-6, it was better, all working, but a little laggy too. Later put [email protected] The ROM is good (faster, very clean and clear voice, faster wifi etc...) but later found data not working. I read somewhere that the ROM may not be suitable for Indian version. When I want to load back the backup of MIUI-6, I am unable to boot in recovery mode. Only Nubia logo appears with all combination of switches. I am able to enter into recovery menu (Vol- and power). When I select "boot into recovery mode", only Nubia logo appears. I saw the directories in the PC, there is no TWRP directory in the internal storage. I tried to once again load TWRP, in the PC I get everything o.k, but in the phone, it strucks at recovery screen, and hangs. I have to press vol- and power to reboot again. It reboots o.k. Now, how do I get into TWRP recovery? Is there anyway to make data working with the present ROM? I tried all, like, draining the battery ...... etc.... not helping. Some information in this regard will be of great help.
I have tried everything possible as below.
As the above case, I am also using Indian version of Z9 Mini. I have flashed TWRP and then flashed MIUI6 & 7 and after that I came back to original rom through backup. Then after that, once again I came to MIUI7, after that when I tried to came to original rom, I can't. So I have downloaded last ROM from [email protected] , that is 3.61 . I that, my sim cards were not detecting. After that, when I tried to open TWRP , I can't. Just Nubia logo screen. After that I tried One Click Root Tool to flash TWRP. At that time , when my phone gone for rebooting , it's gone. Now whenever I tried to boot the phone or boot into bootloader , only that nubia logo screen appears. When I tried to flash through fastboot , device is not detecting. Why so ? . No partitions are seen on computer . I have tried all above steps , but no help . When I tried that fastboot flashable ROM by vijay2 , phone reboots to bootloader and in computer, it flashes everything. But after reboot , it is as same as before . What to do ? . If it is the case of missing driver , then please give me a link for it.
I have a European Huawei P9 EVA-L09 model which I adore. It was running Marshmallow and EMUI 4.1. I found a Nougat beta ROM and I tried to install it but have left it in an unusable state.
I don't think the phone is rooted but I do think the bootloader is unlocked.
I can boot into 3 modes.
Mode 1 - Just reboot
Huawei eRecovery where I get the options to download latest version and recovery, Reboot and Shutdown. If I select the Download latest version and recovery it setups my Wifi and then fails with the message Getting package info failed.
Mode 2 - Power + Vol Up
It boots into a screen that gives me the option to Reboot your System Now, Wipe data / factory Reset , Wipe Cache partition. Selecting Wipe Data/Factory reset returns back to this screen with an error - Red Exclamation mark. Selecting Wipe Cache partition seems to perform a wipe and returns to the original screen with the 3 options again.
Mode 3 - Connect to PC with Hisense and power + vol down
This goes into an android recovery screen which is white with a green android displayed
I have the USB drivers installed on my PC but I cannot see the phone in Windows explorer when I plug it in via USB. I do hear the recognition tone that Windows has recognised that a USB device has been attached. The Huawei PC software doesn't recognise it unless I go into the white android screen and select recover. This always fails saying it cannot find a package.
I have installed stock P9 Marshmallow firmware on my SD card in a dload folder (which is how I bricked it in the first place. When I hold Vol up and Vol Down and power it starts installing but then fails about 40% - 50% through. I have tried multiple versions of the L09 firmware but none of them install successfully.
I am not very technical and not an android expert so cannot say I have done everything perfectly correctly. #
Is my phone bricked or is it possible get my phone back working?
You can get your phone back, search the forums for dc phoenix, which has helped people including myself.
The other option is to go the huawei website, and look under downloads for p9. Find the two firmwares for beta rollback and follow the instructions, although i am not 100% confident that will work for you
use dc phoneix ... i was the in tha same condition
So I have installed and tried install a few different ROMs to the phone. DC Phoenix recognizes the phone as it comes up with the IMEI and version in the left hand window. It seems to install the ROM sucessfully.
I get a message at the end saying it finished successfully but when I boot back up it just goes straight into the same eRecovery screen I have tried B166 and B322 and no luck. Is there anything different I should be doing?
...and now I have a new issue
Thanks for everyone's help. After downloading and trying about 10 different ROMs I was able to get a Nougat ROM to install. Now I have a different problem
1. When I reboot I get a verification failed message. I get an option to go to eRecovery (which works the same as above and doesn't find a package)
So what I really want now is just to get back to stock Marshmallow and not have a verification message and not have some Nougat version that doesn't look like the official Huawei ROM.
So what next folks?
I encountered the exact same problem a few days ago. I didn't try DC Phoenix, instead sent it to Huawei for repair, claiming the phone was in a boot-loop I couldn't recover from.
They have fixed it now and the P9 is on its way back to me. What's strange is that they have swapped the whole motherboard for a new one! Didn't expect that.
Hi,
So I had a Problem that my huawei (Working Phone) soft bricked himself over night. It was on his charger over night and worked fine on this evening... on the next morning I want to check my calender and the phone was already on the huawei logo... I think ok it does a reboot and locked himself. Than I forced off the device with power + volume up. Reboot instant after that and still stucked so ok I am soft bricked now. After searching a bit on Google it sad delete your cache via recovery. Problem I can't enter recovery or eRecovery only fastboot is available. Going into fastboot try the hisuit from huawei with the result phone not supported. But after that try on the white fastboot screen stand's "entering recovery mode..." so i let it do his thing... After many hours I came back and there it was the emui recovery. I decided to only clear the cache and boot. Again soft lock on logo... After that I tried again fastboot -> hisuit that doesn't work that the phone says entering recovery mode... -> but nothing happened...
I came back after the next work day...
The screen was black and I can't boot it anymore (still lie on my desk since first soft brick so yeah I am 100% proof the display will work) I plugged it in in my pc and it says now USB SER typical driver not found error code from windows...
IT will react when I force it with power + volume up only with dc from pc and reconnect in USB SER
Anyone any ideas to fix this hard brick?
Model: SNE-LX1
FRP and Phone locked
Stock Rom on it !
And If it possible I will let it as stock as possible (as I said it's only a work phone!)
Thanks for all the help !
@Blade8895
F
Huawei phones just aren't what they used to be... Some time ago their unlock policy vanished into thin air, then came alligations of spying, a trade ban in the US, and I've even heard rumors about them trying to make phones brick themselves after installing custom software. ?
Sadly, I can only recommend to stay clear of their devices until this whole situation improves...
I actually have the same issue, my phone downloaded the latest update and I scheduled it to auto update at midnight,next morning when I woke up,was surprised coz my regular alarm (from phone) didnt woke me up,so I grab my phone and saw it was dead,but it was full charge, then it didnt open anymore,and I tried to do all the reset or hard recovery technics on the net but it still is bricked. If I plug it on a computer it only says usb ser.. I guess its how the company makes money by destroying their own system,so you'd buy a new one,coz you cant access your data or all your files from the old one,so you would buy a new huawei again,to retrieve your files.
USB SER is testpoint mode. Idk how, but you have closed the service mode contacts. In general, this is solvable, in the service it should not cost a lot of money.
Hi, I'm having a complete disaster today having tried to go from the latest stable Chinese ROM to a global ROM.
I understand that I need to unlock the bootloader, so after a fair while managed to do this. It didn't work on my PC but it did on my wife's. I really should have given up then. Sigh.
I think this unlocking did work as the developer settings say it's unlocked and when the phone boots up (when it did boot up) there was a little unlocked graphic at the top of the screen.
At this stage I thought all would be good. I have downloaded the MiFlash tool (2021.2.26.0) and the ROM below.
Mi 8dipperstableV12.0.2.0.QEAMIXM10.0GlobalDownload2020-11-23
I'm certain that I have the Mi 8 (and not the lite or other version) so this seems like it should flash?
After having to download a fix (something to do with drivers) I can see my phone in the Flash tool and can select the folder with the rom (before the fix any refresh would just cause my phone to say "any key to shutdown"). So I can click "flash" and keep everything crossed.
But, it doesn't work. Initially it seemed to progress but after about 10 minutes, with the status bat at ~95%, it gives a timeout error. I think - though I'm losing track - but I could still boot my phone up at this stage.
I did this a few times and the same thing happened. Then, I got a worse sounding error "Missmatching image and device". I kept trying and got this or some other instant error that I didn't note down.
After this my phone wouldn't boot up, it just goes into recovery mode. I do note that it I press vol up and power I get the option to connect to some windows app (this doesn't work) but curiously if I try flash from this state I get the same issue as above (it seems to work slowly but then times out).
So I'm at a loss and have a broken phone! Any suggestions would be very helpful to say the least!
I'll add that at the moment the phone is stuck with the fastboot logo on, so I can't even turn the damn thing off. I can try but it just boots up again into this screen :-(
Geeze, on about the 20th try the flash tool just hung so I yanked the phone out and now it seems to have worked. I'm keeping everything crossed right now!
Display fastboot logo, maybe it is not bricked.
"It didn't work on my PC but it did on my wife's. ". I had the same problem when I unlock the bootloader. mi 8 not work well with usb3.0, suggest you use your wife's computer with usb2.0. OR patch you PC registry of windows 10 with attached bat file.
Are you a Chinese ?