I have moto g5s plus which is unable to boot up and i tried every thing including flashing with rsd lite but there flashing failed error is showing, also i have tried with adb fastboot which showing error like "no emulator found", "Android not set","unable to unlock boot loader with the help of motorola website.
please suggest if any alternative is possible for this
chirag B said:
I have moto g5s plus which is unable to boot up and i tried every thing including flashing with rsd lite but there flashing failed error is showing, also i have tried with adb fastboot which showing error like "no emulator found", "Android not set","unable to unlock boot loader with the help of motorola website.
please suggest if any alternative is possible for this
Click to expand...
Click to collapse
RSD lite doesn't work with most 8/10/11 Windows machines, which version are you using?
How does the device show in device manager?
[Index] Setting up and Using ADB/Fastboot
Setting up and Using ADB/Fastboot [INDEX] Helpful Information Welcome, this thread has been created to encompass everything you may need for Using ADB. Please only post in this thread with feedback on how to improve this document. Do not post...
forum.xda-developers.com
i am using windows 10 machine
unable to find device while using adb. see below image for reference
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
chirag B said:
unable to find device while using adb. see below image for reference
View attachment 5590683
Click to expand...
Click to collapse
How is it listed in Device Manager?
device manager shows the list as shown in below image.
phone showing IMEI 0 when started
please suggest for above reply @sd_shadow
chirag B said:
unable to find device while using adb. see below image for reference
View attachment 5590683
Click to expand...
Click to collapse
The device is booted normally, not in bootloader, or fastboot modes?
device doesnt boot in any means @sd_shadow
chirag B said:
device doesnt boot in any means @sd_shadow
Click to expand...
Click to collapse
So there’s nothing on the phone screen?
No text or logo?
screen shows as shown in the below image
please see below image
@sd_shadow
chirag B said:
please see below image
View attachment 5594563View attachment 5594565
Click to expand...
Click to collapse
First pic is bootloader mode use fastboot commands not adb
Second pic is barcodes I don’t think any commands work with that.
Related
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
for Android One 2nd Gen Qualcomm Snapdragon Msm8916 Devices
General Mobile 4G / Dual
Cherry Mobile One G1
I-Mobile IQ II
Main Thread
Forum One Team
Working
All Features
:fingers-crossed: :laugh: :victory: :angel:
Installation 1 On Recovery
Place TWRP-3.0.0-0.zip file in Sd card
Reboot in Recovery Mode
Install the Recovery zip
Reboot Recovery
Installation 2 (First Install) On PC
Install drivers (for PC)
Download .zip file and extract to Empty folder
"Shift+Right Click" on Folder select > Open command window here
Unlock Oem (in Developer Options)
Reboot in Bootloader Mode
Connect to the computer via USB
Erase/Delete code
Code:
fastboot erase recovery
Flash code
Code:
fastboot flash recovery recovery.img
Only boot code
Code:
fastboot boot recovery.img
Screenshots you can see here
Downloads
Twrp 3.0.0-0
PC Drivers
Rezerved
thanks bro
does it work on Cherry Mobile One G1 as well?
rockmanX2012 said:
does it work on Cherry Mobile One G1 as well?
Click to expand...
Click to collapse
Clone device One G1. Work fine :good:
You can try
atakan58 said:
Clone device One G1. Work fine :good:
You can try
Click to expand...
Click to collapse
I see. Any known issues? Let me try once I get home
question
can we flash this using stock recovery?
hello...can i flash this using stock recovery?
xtian282105 said:
hello...can i flash this using stock recovery?
Click to expand...
Click to collapse
Probably no. You can try
rockmanX2012 said:
I see. Any known issues? Let me try once I get home
Click to expand...
Click to collapse
Working
All Features :fingers-crossed:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
as you can see any command on sendcommand.exe says FAIL.i'm using right COM port.
did i made mistake? anyway HELP ME
who006 said:
as you can see any command on sendcommand.exe says FAIL.i'm using right COM port.
did i made mistake? anyway HELP ME
Click to expand...
Click to collapse
***Warning this may brick your phone if done wrong!!! I take no responsibility.***
You have to start to flash a tot and pull the usb as soon as the com port displays on your phone (you have less than a second to do this).
Close the flashing program and then reconnect the usb and you should be able to use send_command.exe
same problem and my phone isn't bricked sendcommand just not working. my version is zvB
who006 said:
same problem and my phone isn't bricked sendcommand just not working. my version is zvB
Click to expand...
Click to collapse
Do the steps that I listed above... I am on ZVB too and it works. I was just warning you that you COULD brick your phone by doing this.
l33tlinuxh4x0r said:
Do the steps that I listed above... I am on ZVB too and it works. I was just warning you that you COULD brick your phone by doing this.
Click to expand...
Click to collapse
i have followed that steps but result in sendcommand is same
who006 said:
i have followed that steps but result in sendcommand is same
Click to expand...
Click to collapse
That is weird... Try a different command. I'm not sure if you need to type su or not anymore. Download mode is probably already in su mode.
l33tlinuxh4x0r said:
That is weird... Try a different command. I'm not sure if you need to type su or not anymore. Download mode is probably already in su mode.
Click to expand...
Click to collapse
i'm wondering why is this happening and searching errors for this and there aren't any conclusions.
only command working in sendcommand is #LEAVE #ENTER other command's saying fail. Even using TOT files to enter COM port
I have tried over and over again to unlock the bootloader.
I've signed into my Mi Account, the same on both my PC (Mi Unlock Tool) and phone.
I installed the Xiaomi driver.
I click unlock, and then it gets to 99% before saying Unknown error (-1)
I've tried on two PCs, one AMD Ryzen 2nd gen, one Intel Core 6th gen.
After trying on the Intel PC, the phone is no longer detected by the Mi Unlock Tool, on both PCs
I really need help with this
What version? Try to another.
mar.ur said:
What version? Try to another.
Click to expand...
Click to collapse
I've tried Mi Unlock versions 3.5.1108.44 and 3.5.1128.45
Any recommended versions?
capitalists said:
I've tried Mi Unlock versions 3.5.1108.44 and 3.5.1128.45
Any recommended versions?
Click to expand...
Click to collapse
Try to 2.3.XXX
Check if your phone(fastboot mode) is detected in device manager as well.
mar.ur said:
Try to 2.3.XXX
Check if your phone(fastboot mode) is detected in device manager as well.
Click to expand...
Click to collapse
My phone always shows up on device manager as Android Bootloader Interface.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Whenever I connect my phone while MiFlash is open, the phone instantly exists the bootloader, but stays on the bootloader if I reconnect it.
Edit: I also tried MiFlash 2.3.803.10, but my phone is not detected there either.
IT FINALLY WORKED when I disabled device signature enforcement on Windows.
Thanks for the help guys.
EDIT: IT DIDN'T BLOODY WORK. The unlock tool said successfully unlocked. When I check on the phone and through typing 'fastboot oem device info'
it said the phone was not unlocked.
EDIT #2: All of a sudden it just worked on my Intel PC with the newest version of Mi Unock
s
capitalists said:
EDIT: IT DIDN'T BLOODY WORK. The unlock tool said successfully unlocked. When I check on the phone and through typing 'fastboot oem device info'
it said the phone was not unlocked
Click to expand...
Click to collapse
same hear brother please give me proper solution if you find
Hello,
I'm new to everything here, patience is appreciated.
I'm trying to find stock Samsung firmware for a Samsung S10. i can not seem to find the appropriate version of firmware that corresponds to device IMEI/Model/sku/SN
I am located in Canada and none of the values offered give me the confidence to continue with the process of flashing the stock firmware.
I have attached a screenshot of the barcodes displayed by device
Welcome to XDA
Once you upload an image you need to choose thumbnail or full display on the image for it to appear in your post.
You might want to blur that IMEI number more, it's extractable I think...
What's your current OS version?
blackhawk said:
You might want to blur that IMEI number more, it's extractable I think...
What's your current OS version?
Click to expand...
Click to collapse
not sure of OS version... the fone is stuck in bootloop with a light blue screen with a white triangle and exclamation point.
direction had me try 'smart switch' but software didnot provide "initialize device'...
Try powering up into the boot menu. If you can try to factory reset.
maxomillion said:
not sure of OS version... the fone is stuck in bootloop with a light blue screen with a white triangle and exclamation point.
direction had me try 'smart switch' but software didnot provide "initialize
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
blackhawk said:
Try powering up into the boot menu. If you can try to factory reset.
Click to expand...
Click to collapse
not an option... fone only powers on when plugged to charger and hen only shows previously mentioned blue screen with white triangle... stating an 'error occured during update...' ive tried various push and hold button combinations...the combination that should open odin mode brings me back to the white triangle...
maxomillion said:
View attachment 5507899View attachment 5507899View attachment 5507899
not an option... fone only powers on when plugged to charger and hen only shows previously mentioned blue screen with white triangle... stating an 'error occured during update...' ive tried various push and hold button combinations...the combination that should open odin mode brings me back to the white triangle...View attachment 5507899View attachment 5507901View attachment 5507903View attachment 5507905View attachment 5507901View attachment 5507903View attachment 5507905
Click to expand...
Click to collapse
what the hell happened there!?!?
You'll need to use odin to reinstall your "bl" file out of the firmware files. You've wiped your bootloader. Once it has that it should be a fairly easy fix. Or just go with all of them, reeinstall the firmware entirely.
Hello.
So i wanted to changed the rom, and Xiaomi Flash Tool crashed, it hardbricked the phone.
After 1 weeks of trying to repair the phone, i did it but the IMEI code was deleted.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
(*#06#)
I tried to set it in the MTK Engineering Mode, but i could not set it because the option was not here.
I also tried other app that could change the IMEI code (with the help of the root), but nothing, until i found out later that there's no EFS folder in the phone.
I only found out this folder :
(NVD_IMEI)
(Content of NVD_IMEI)
Can somebody help me ?
Thanks.
Try this.
brav3h3ar8 said:
Try this.
Click to expand...
Click to collapse
It dosen't work :/
It's worked for me bro
I think you didn't understand the procedure,if you want, I'll guide you
So i have this error when i try to connect the app to the phone
Paulth67 said:
Hello.
So i wanted to changed the rom, and Xiaomi Flash Tool crashed, it hardbricked the phone.
After 1 weeks of trying to repair the phone, i did it but the IMEI code was deleted.
View attachment 5838377
(*#06#)
I tried to set it in the MTK Engineering Mode, but i could not set it because the option was not here.
I also tried other app that could change the IMEI code (with the help of the root), but nothing, until i found out later that there's no EFS folder in the phone.
I only found out this folder :
View attachment 5838389
(NVD_IMEI)
View attachment 5838393
(Content of NVD_IMEI)
Can somebody help me ?
Thanks.
Click to expand...
Click to collapse
bro always BACKUP the stock rom before doing anything with mtk client so when something happen u can always back to the original
try to look for someone who has a full backup of the rom and download it
Khalyl22 said:
bro always BACKUP the stock rom before doing anything with mtk client so when something happen u can always back to the original
try to look for someone who has a full backup of the rom and download it
Click to expand...
Click to collapse
Yeah i know but i I forgot to do it
Paulth67 said:
So i have this error when i try to connect the app to the phone
View attachment 5900909
Click to expand...
Click to collapse
Update : I try with usb but now it stuck on Connect to MD
After a "modeswitch" most probably the device will connect as a different USB device which will need a driver. It takes some time and often needs manual installation when this happens. Check the device manager for the newly appeared unknown device and check the driver...