Database Develop

Soft Bricked Redmi 4X Global, Can't find solution, please help me :(

Hello Xda community,
I need help badly , I bricked my phone one week after receiving it !! My goal was to install Clarity kernel for better battery performance.
I try to tell you all the steps and informations you will need to help me :
1 - I unloacked bootloader using Mi unlock.
2 - I installed TWRP 3.1.1-0 and root my device this way : LINK (method 2)
3 - I flash in recovery mode last MIUI rom 9.5.5.0, phone still running well after that
4 - I boot in recovery and flash this firmware in order to flash Clarity Kernel after
5 - After flashing the firmware I reboot and Im stuck at MIUI logo. I can go to fastboot mode though. But unable to reach recovery mode neither switch off the phone.
6 - I install MiFlash and tried to flash different version of rom MIUI santoni from official website (9.5.5.0 / 8.2.10.0) neither work SEE IMAGE I tried with mi flash 2016.08.30 same result
I get different status on mi flash, one is (image not matching device), even though I think I did everything well.
7 - Since last try of flashing my computer does not even recognise my phone in fastboot mode like before :/ and MiFlash doesn't see my phone :/
Please give me some advice/clue to revive my phone :crying:
In advance I thank you so much :good:
I use Windows 10 - 64 bits

try booting recovery from fastboot "fastboot boot *twrp image*.img"

Niaph said:
Hello Xda community,
I need help badly , I bricked my phone one week after receiving it !! My goal was to install..........
In advance I thank you so much :good:
I use Windows 10 - 64 bits
Click to expand...
Click to collapse
Well i am not at all an expert in miui, infact this is my first mi phone. But i think this tool called xiaomi adb/fastboot tool can help u. Google it.... It is available in reddit. One piece of general advice : before any kind of experiment always keep a preparation for the worst case scenario. I think ur phone is stuck at boot. U can try to hold the power button for about 10-15 seconds to turn off. Also just relax and have patience... It will b solved. Let me know how it goes.

Niaph said:
Hello Xda community,
I need help badly , I bricked my phone one week after receiving it !! My goal was to install Clarity kernel for better battery performance.
I try to tell you all the steps and informations you will need to help me :
1 - I unloacked bootloader using Mi unlock.
2 - I installed TWRP 3.1.1-0 and root my device this way : LINK (method 2)
3 - I flash in recovery mode last MIUI rom 9.5.5.0, phone still running well after that
4 - I boot in recovery and flash this firmware in order to flash Clarity Kernel after
5 - After flashing the firmware I reboot and Im stuck at MIUI logo. I can go to fastboot mode though. But unable to reach recovery mode neither switch off the phone.
6 - I install MiFlash and tried to flash different version of rom MIUI santoni from official website (9.5.5.0 / 8.2.10.0) neither work SEE IMAGE I tried with mi flash 2016.08.30 same result
I get different status on mi flash, one is (image not matching device), even though I think I did everything well.
7 - Since last try of flashing my computer does not even recognise my phone in fastboot mode like before :/ and MiFlash doesn't see my phone :/
Please give me some advice/clue to revive my phone :crying:
In advance I thank you so much :good:
I use Windows 10 - 64 bits
Click to expand...
Click to collapse
Nevermind I misread... If you think clarity or the firmware messed up your phone I could give you my kernel and firmware for you to restore it
Though if you're desperate for a solution, I'd transfer a ROM into your phone and start over with it, you can flash MIUI also by flashing https://drive.google.com/file/d/0ByWEieei-0nyMTR4R0dxWk9BTms/view after it

Your version of miflash is a little bit outdated! The last One is from may, last year if my memory doesnt fail. Install latest version of miflash and try to flash again stock ROM.
You can try also flashing stock ROM with miflash but in edl mode (emergency download mode) , instead of fastboot mode, but to do that you have to acess stock recovery, and then use this command " adb reboot edl", connect your phone to PC, and then see of detects, then flash then stock ROM. To acess stock recovery, press volume up + Power, if that not works, press volume up + volume down+ Power. Hope i helped

Ok I solved the problem using this method.
So I removed back cover, disconnected battery, connected the 2 points with a twizzer then flashed STOCK rom and it worked!! So relieved!
Thank you for the help anyway.

Speaker87 said:
Your version of miflash is a little bit outdated! The last One is from may, last year if my memory doesnt fail. Install latest version of miflash and try to flash again stock ROM.
You can try also flashing stock ROM with miflash but in edl mode (emergency download mode) , instead of fastboot mode, but to do that you have to acess stock recovery, and then use this command " adb reboot edl", connect your phone to PC, and then see of detects, then flash then stock ROM. To acess stock recovery, press volume up + Power, if that not works, press volume up + volume down+ Power. Hope i helped
Click to expand...
Click to collapse
Dear sir,
flashing redmi4 with miflash tool in edl shows me "object reference is not set to an instance of the object". Any solution please. This was second time i try flashing soft bricked redmi4 , first time few days ago flashed successfully and was using it properly in edl with miflash tool. Then During downloading update shown in setting by ota and rebooting it, and again got stuck on mi logo, means softbricked again.but try edl this time gives an error mentioned.
Speaker87 said:
Your version of miflash is a little bit outdated! The last One is from may, last year if my memory doesnt fail. Install latest version of miflash and try to flash again stock ROM.
You can try also flashing stock ROM with miflash but in edl mode (emergency download mode) , instead of fastboot mode, but to do that you have to acess stock recovery, and then use this command " adb reboot edl", connect your phone to PC, and then see of detects, then flash then stock ROM. To acess stock recovery, press volume up + Power, if that not works, press volume up + volume down+ Power. Hope i helped
Click to expand...
Click to collapse

chandan shah said:
Dear sir,
flashing redmi4 with miflash tool in edl shows me "object reference is not set to an instance of the object". Any solution please. This was second time i try flashing soft bricked redmi4 , first time few days ago flashed successfully and was using it properly in edl with miflash tool. Then During downloading update shown in setting by ota and rebooting it, and again got stuck on mi logo, means softbricked again.but try edl this time gives an error mentioned.
Click to expand...
Click to collapse
Problem solved.
I got revived my redmi 4 again from softbricked locked bootloader,
By trying an older rom
santoni_global_images_V8.2.12.0.MAMMIEA_20170629.0000.00_6.0_global_751410291c.tgz​With miflash-20220218 in edl mode .

I need help for my bricked k20 pro!!

The situation is that I just bought the K20 Pro. Then i unlock and flash by miflash with Global Rom via this thread then the device has bricked and has the message "This MIUI version can't be installed on this device".
Tried boot into recovery but the TWRP has gone and the bootloader has been locked.
Flash back to China Rom by miflash is doesn't work either, help me please, i don't know what to do now, i tried every thing i can.
:crying::crying:
P/s: Sorry for my bad English.

dsown said:
The situation is that I just bought the K20 Pro. Then i unlock and flash by miflash with Global Rom via this thread then the device has bricked and has the message "This MIUI version can't be installed on this device".
Tried boot into recovery but the TWRP has gone and the bootloader has been locked.
Flash back to China Rom by miflash is doesn't work either, help me please, i don't know what to do now, i tried every thing i can.
:crying::crying:
P/s: Sorry for my bad English.
Click to expand...
Click to collapse
just calm down and try to unlock bootloader again by (miflash_unlock) then install in computer (adb-setup-1.4.3) then keep press on power and volume down button for fastboat then open miflash (version=2017.4.25.0) and connect your phone and press refresh to see your phone on list then download India Stable Firmwares version in same thread you mention and unzip the file and unzip the result file then you will see 12 file (images/ flash_all.bat .....) and in miflash choose the file and press flash and wait... when its done your phone will work but will give account is locked just connect with wifi and write your micloud password and done .

dsown said:
The situation is that I just bought the K20 Pro. Then i unlock and flash by miflash with Global Rom via this thread then the device has bricked and has the message "This MIUI version can't be installed on this device".
Tried boot into recovery but the TWRP has gone and the bootloader has been locked.
Flash back to China Rom by miflash is doesn't work either, help me please, i don't know what to do now, i tried every thing i can.
:crying::crying:
P/s: Sorry for my bad English.
Click to expand...
Click to collapse
Miflash only works on an unlocked bootloader. It appears that you have a Chinese Model and you just did what was supposed to be avoided. You should get accustomed to Miflash moving forward. Never use Flash_All_Lock while cross flashing China/Global roms. You'll have to wait to unlock your Bootloader now and post that flash the China rom to get back. If any time you wish to move to the India rom, either use a twrp recovery or just use Flash_All while using the fastboot image which should eventually avoid locking the bootloader
Sent from my Redmi K20 Pro using Tapatalk

dsown said:
The situation is that I just bought the K20 Pro. Then i unlock and flash by miflash with Global Rom via this thread then the device has bricked and has the message "This MIUI version can't be installed on this device".
Tried boot into recovery but the TWRP has gone and the bootloader has been locked.
Flash back to China Rom by miflash is doesn't work either, help me please, i don't know what to do now, i tried every thing i can.
:crying::crying:
P/s: Sorry for my bad English.
Click to expand...
Click to collapse
1. if you can still enter fastboot mode, there is a possibility that you can do TWRP flashing again (the TWRP version must be correct so that the data on the cellphone can be read properly) / Flashing from the PC (if you are lucky, the flashing will work properly without any problem or you can bypass the bootloader locked using software or something else). [make sure ROM version must be appropriate because this is very crucial]
2. You can try using the test point method (EDL / Emergency Download Mode) [This method is usually used if your K20Pro is constrained by Hardbrick due to ARB4] , but this method requires you to open the case / body behind your K20Pro. and I cannot guarantee that the flashing process will succeed easily because in some cases if the K20Pro is detected damage / error due to ARB4, then you are required to have an Authorized Mi Account. I might be able to help you remotely, if you agree with the risks & requirements in the flashing process (I can lend my account, but it's not free).

Hi All, I did the same thing - whoever build the UI for MiFlash should be shot - why default that selection to something that will be undesirable!!?
Anyway, i tried to flash indian rom and forgot to set to Clean All, it locked the bootloader.
So i now have redmi recovery and Fastboot options only on phone.
Have tried fastboot + miflash but all options (now with Chinese rom) - says Erase Boot Error.
Tried MiAssistant + Mi PC Suite - it is not detecting the phone in either MiAssistant recovery mode nor Fastboot mode. what is weird is the phone and connector animation on phone is correctly depicting when it is plugged in/unplugged. But the PC suite isnt detecting the device.
Soft bricked - *sigh.... any help will be greatly appreciated from the community
BTW i am more worried that the phone will run out of battery and never wake up once battery drains completely as it is in bootloop into Redmi recovery and can't be turned off (someone tell me how!?) - I don't see the phone respond to charging in any state... : (

Can you still reach fastboot? If so you can unlock phone again and flash TWRP using ADB. After that boot straight into TWRP and connect it to your computer, internal SD storage should then automatically mount. Drag and drop ROM .zip into internal storage, use TWRP file manager to move it out of the data folder and do a default wipe using TWRP. Then flash .zip ROM (for example xiaomi.eu stable) and you should be back in business. Please let me know if you need any files like working recovery image and further instructions.
I had some trouble with my TWRP recovery yesterday, flashed it on unlocked bootloader with Chinese stable ROM installed, on reboot out of fastboot it boots straight into ROM and overwrites the TWRP recovery with default recovery. I fixed it by flashing recovery again, boot straight into it and flash xiaomi.eu stable, now recovery is TWRP and does not get overwritten.

hippo2s said:
Hi All, I did the same thing - whoever build the UI for MiFlash should be shot - why default that selection to something that will be undesirable!!?
Anyway, i tried to flash indian rom and forgot to set to Clean All, it locked the bootloader.
So i now have redmi recovery and Fastboot options only on phone.
Have tried fastboot + miflash but all options (now with Chinese rom) - says Erase Boot Error.
Tried MiAssistant + Mi PC Suite - it is not detecting the phone in either MiAssistant recovery mode nor Fastboot mode. what is weird is the phone and connector animation on phone is correctly depicting when it is plugged in/unplugged. But the PC suite isnt detecting the device.
Soft bricked - *sigh.... any help will be greatly appreciated from the community
BTW i am more worried that the phone will run out of battery and never wake up once battery drains completely as it is in bootloop into Redmi recovery and can't be turned off (someone tell me how!?) - I don't see the phone respond to charging in any state... : (
Click to expand...
Click to collapse
Read this https://forum.xda-developers.com/k20-pro/help/destroyed-error-fastboot-locked-t3946012
And this
https://forum.xda-developers.com/k20-pro/help/k20-pro-bricked-t3951531
You're probably going to have to open up the phone and pay $20 for someone to use their authorised account to flash an official ROM whilst remoting in to your PC.

322Reznov said:
Can you still reach fastboot? If so you can unlock phone again and flash TWRP using ADB. After that boot straight into TWRP and connect it to your computer, internal SD storage should then automatically mount. Drag and drop ROM .zip into internal storage, use TWRP file manager to move it out of the data folder and do a default wipe using TWRP. Then flash .zip ROM (for example xiaomi.eu stable) and you should be back in business. Please let me know if you need any files like working recovery image and further instructions.
I had some trouble with my TWRP recovery yesterday, flashed it on unlocked bootloader with Chinese stable ROM installed, on reboot out of fastboot it boots straight into ROM and overwrites the TWRP recovery with default recovery. I fixed it by flashing recovery again, boot straight into it and flash xiaomi.eu stable, now recovery is TWRP and does not get overwritten.
Click to expand...
Click to collapse
Some great ideas - Just tried to unlock bootloader - This device came pre-unlocked so the device is tied to the seller's account.
I have unlock permission - but unlocker say device is not bound to my account matching my assumptions - anyone know what's the best way to re-claim ownership? Especially when I can't get into ROM at all?

hippo2s said:
Some great ideas - Just tried to unlock bootloader - This device came pre-unlocked so the device is tied to the seller's account.
I have unlock permission - but unlocker say device is not bound to my account matching my assumptions - anyone know what's the best way to re-claim ownership? Especially when I can't get into ROM at all?
Click to expand...
Click to collapse
My comment was meant for OP but I hoped it would help you as well! I am personally not well informed about the Xiaomi / Redmi ownership situation when the seller unlocked the phone.. maybe you can contact them and get a corresponding password to the account, it has been the solution I have seen offered here. Maybe the emergency flash solution from Robbo.5000 works?
I just got this phone a week now and was only able to unlock and flash yesterday, I was aware of the ownership problem thanks to this forum so I bought the sealed CN version. Hope you figure it out!

Thanks guys. I am going for the Test Point solution - have made contact with the Russian tech the others did and made an appointment. I just have to pretend to be Jerry Rig before then and open her up! Fingers crossed!

322Reznov said:
Can you still reach fastboot? If so you can unlock phone again and flash TWRP using ADB. After that boot straight into TWRP and connect it to your computer, internal SD storage should then automatically mount. Drag and drop ROM .zip into internal storage, use TWRP file manager to move it out of the data folder and do a default wipe using TWRP. Then flash .zip ROM (for example xiaomi.eu stable) and you should be back in business. Please let me know if you need any files like working recovery image and further instructions.
I had some trouble with my TWRP recovery yesterday, flashed it on unlocked bootloader with Chinese stable ROM installed, on reboot out of fastboot it boots straight into ROM and overwrites the TWRP recovery with default recovery. I fixed it by flashing recovery again, boot straight into it and flash xiaomi.eu stable, now recovery is TWRP and does not get overwritten.
Click to expand...
Click to collapse
You need yo flash magisk after you flash twrp if you want to run regular miui, to prevent it from overwriting the recovery. Its the same on poco and all xiaomi phones

Mooatreides said:
You need yo flash magisk after you flash twrp if you want to run regular miui, to prevent it from overwriting the recovery. Its the same on poco and all xiaomi phones
Click to expand...
Click to collapse
Ah alright thank you for the info! This is my first ever Xiaomi / Redmi phone haha

dsown said:
The situation is that I just bought the K20 Pro. Then i unlock and flash by miflash with Global Rom via this thread then the device has bricked and has the message "This MIUI version can't be installed on this device".
Tried boot into recovery but the TWRP has gone and the bootloader has been locked.
Flash back to China Rom by miflash is doesn't work either, help me please, i don't know what to do now, i tried every thing i can.
:crying::crying:
P/s: Sorry for my bad English.
Click to expand...
Click to collapse
Did you flash the global rom on an existing running Chinese rom or on an empty device (formatted)? Just for myself cuz I'm not sure whether to unlock and then unable to relock. Thanks.

pungky771 said:
1. if you can still enter fastboot mode, there is a possibility that you can do TWRP flashing again (the TWRP version must be correct so that the data on the cellphone can be read properly) / Flashing from the PC (if you are lucky, the flashing will work properly without any problem or you can bypass the bootloader locked using software or something else). [make sure ROM version must be appropriate because this is very crucial]
2. You can try using the test point method (EDL / Emergency Download Mode) [This method is usually used if your K20Pro is constrained by Hardbrick due to ARB4] , but this method requires you to open the case / body behind your K20Pro. and I cannot guarantee that the flashing process will succeed easily because in some cases if the K20Pro is detected damage / error due to ARB4, then you are required to have an Authorized Mi Account. I might be able to help you remotely, if you agree with the risks & requirements in the flashing process (I can lend my account, but it's not free).
Click to expand...
Click to collapse
My k20 pro is hard bricked and i cant get fast boot or any thing it wont even come on. Assistance please

hippo2s said:
Thanks guys. I am going for the Test Point solution - have made contact with the Russian tech the others did and made an appointment. I just have to pretend to be Jerry Rig before then and open her up! Fingers crossed!
Click to expand...
Click to collapse
Could you please point me to the person you have contacted?
I'm in EDL for about two weeks now, unable to solve it by different means (seller sais 'send it back', which I'm not goong to do; S-unlock has the service unavailable, even though I've paid them and the guy I contacted there tried through TW to no avail, waiting for a 'money back' now)..

MI A2 Black screen

Hi guys!
May I know if anybody here experienced black screen ? Screen has no image to display. Backlight is working, Led light is working when charging, fingerprint vibrates as well when A2 is turned on. I have tried replacing LCD display but black screen persists. What do you think is the problem?
Sent from my Mi 9 SE using Tapatalk

I have the same problem!!!! I try flash rom again but it persists

Yesterday it happened to me also.
The phone is working, the touch is working, but the lcd is black.
I even managed to recieve a call. Tried to restart the phone but its still black screen with working touch.
I can't find any solution...

Anybody found a solution??
My MI A2 is in black screen after updated to Wayne V11.0.6.0.PDCCNXM 20200509.
Tried to flash again, the screen didn't even turned on anymore, then used an UNBRICK WAYNE XIAOMI MI6X and it's back to black screen, been like this for 4 days now, should I start looking for a new phone? :crying:
Serial number: 23e3c4ee
Codename: wayne
Bootloader: locked
Anti version: 4
ROM: Wayne V11.0.6.0.PDCCNXM 20200509.
When I flash the ROM again, takes 100, 200 seconds only, and didn't change anything.

RiFeee said:
Anybody found a solution??
My MI A2 is in black screen after updated to Wayne V11.0.6.0.PDCCNXM 20200509.
Tried to flash again, the screen didn't even turned on anymore, then used an UNBRICK WAYNE XIAOMI MI6X and it's back to black screen, been like this for 4 days now, should I start looking for a new phone? :crying:
Serial number: 23e3c4ee
Codename: wayne
Bootloader: locked
Anti version: 4
ROM: Wayne V11.0.6.0.PDCCNXM 20200509.
When I flash the ROM again, takes 100, 200 seconds only, and didn't change anything.
Click to expand...
Click to collapse
stop stressing . you have ARB4 so just flash a custom rom ...or flash only the LASTEST STOCK ROM ...you didn't listen and tried to flash another think ...so your phone went to hardbrick edl mode
your phone is fine it is just in a timeout edl mode
the only way to fully rescue it is by physically forcing testpoint then flashing LATEST FASTBOOT STOCK ...this time listen or stay on black screen

KevMetal said:
stop stressing . you have ARB4 so just flash a custom rom ...or flash only the LASTEST STOCK ROM ...you didn't listen and tried to flash another think ...so your phone went to hardbrick edl mode
your phone is fine it is just in a timeout edl mode
the only way to fully rescue it is by physically forcing testpoint then flashing LATEST FASTBOOT STOCK ...this time listen or stay on black screen
Click to expand...
Click to collapse
Already did it and gets worse, if I flash the latest fastboot Stock ROM really becomes a brick, to de point of not even the screen turns on and stay on edl mode forever.

RiFeee said:
Already did it and gets worse, if I flash the latest fastboot Stock ROM really becomes a brick, to de point of not even the screen turns on and stay on edl mode forever.
Click to expand...
Click to collapse
because you are trying to downgrade
what you need to do is flash the LATEST chinese fastboot stock rom of Wayne or it will never work
you need to flash it with edl and miflash ( LATEST BETA)
you keep on thinking you can flash any stock rom but you can't ......
if you try to flash any stock rom older than the last stock rom you flashed it will never boot and keep going back to edl blackscreen
if you DON'T open your phonr and short the test point miflash will timeout or give errors and device wont boot
open your phone with screwdriver and flash the VERY latest chinese fastboot rom with latest miflash beta

KevMetal said:
because you are trying to downgrade
Click to expand...
Click to collapse
Already tried to downgrade, upgrade, change the type of rom, original, custom, and nothing worked

RiFeee said:
Already tried to downgrade, upgrade, change the type of rom, original, custom, and nothing worked
Click to expand...
Click to collapse
that is your problem ...you think you can get out of this without paying the price ..you cant
do what I told you ...in the posts before

KevMetal said:
because you are trying to downgrade
what you need to do is flash the LATEST chinese fastboot stock rom of Wayne or it will never work
you need to flash it with edl and miflash ( LATEST BETA)
you keep on thinking you can flash any stock rom but you can't ......
if you try to flash any stock rom older than the last stock rom you flashed it will never boot and keep going back to edl blackscreen
if you DON'T open your phonr and short the test point miflash will timeout or give errors and device wont boot
open your phone with screwdriver and flash the VERY latest chinese fastboot rom with latest miflash beta
Click to expand...
Click to collapse
KevMetal said:
that is your problem ...you think you can get out of this without paying the price ..you cant
do what I told you ...in the posts before
Click to expand...
Click to collapse
What a heck are you talking about?
Already did everything with Mi flash, forced edl mode by point test, saw like 300 tutorials, for Mi A2, Mi 6x.
What I needed was a verified Mi account to unlock and flash with no problems

RiFeee said:
What a heck are you talking about?
Already did everything with Mi flash, forced edl mode by point test, saw like 300 tutorials, for Mi A2, Mi 6x.
What I needed was a verified Mi account to unlock and flash with no problems
Click to expand...
Click to collapse
well if you had followed any of mine or listened carefully to what I'm telling you , your device would have booted already ... but continue in the same manner since you think my help is gibberish .
you don't need an account to flash your device ...

KevMetal said:
well if you had followed any of mine or listened carefully to what I'm telling you , your device would have booted already ... but continue in the same manner since you think my help is gibberish .
you don't need an account to flash your device ...
Click to expand...
Click to collapse
I already did, tried all the tutorials from 2018 to last month. The phone bootloader is locked and for some reason I can't unlock it, tried a dozen of different approaches, recovery's, flashings, ADB and everything.
Always ends in two ways, black screen with back light on (some sounds work and keeps in the lock login screen) or dead stuck in permanent EDL mode.

My phone still not working. Maybe its because of the busted display IC.

Question Hard brick

PLEASE HELP!!
I just hard bricked my wife's new Redmi Note 10 Pro!
I bought the Chinese version and got the bootloader unlocked, and then tried to replace it with the global Rom from the official website.
In the process I kept receiving an error: "Mismatching Image and device error ".
I followed a couple of tutorials and this particular seem popular, where I had to delete some lines in the .bat file.
After that the flashing process started but halfway an error appeared again. After several attempts I decided to restart from Fastboot mode, and this was when I realized it had bricked.
Now I can't go to Fastboot mode and I keep getting Vibrations but a dead screen.
PLEASE HELP

swarzB said:
PLEASE HELP!!
I just hard bricked my wife's new Redmi Note 10 Pro!
I bought the Chinese version and got the bootloader unlocked, and then tried to replace it with the global Rom from the official website.
In the process I kept receiving an error: "Mismatching Image and device error ".
I followed a couple of tutorials and this particular seem popular, where I had to delete some lines in the .bat file.
After that the flashing process started but halfway an error appeared again. After several attempts I decided to restart from Fastboot mode, and this was when I realized it had bricked.
Now I can't go to Fastboot mode and I keep getting Vibrations but a dead screen.
PLEASE HELP
Click to expand...
Click to collapse
Download the chinese version
So open google translate and translate" Redmi Note 10 Pro stock firmware China "
copy and paste in google the translated text once you fing one you can download try that one but only flash the partition you need other wise your phone will be in chinese

flairepathos.info said:
Download the chinese version
So open google translate and translate" Redmi Note 10 Pro stock firmware China "
copy and paste in google the translated text once you fing one you can download try that one but only flash the partition you need other wise your phone will be in chinese
Click to expand...
Click to collapse
The problem currently is that I can not boot into Recovery or Fastboot

swarzB said:
The problem currently is that I can not boot into Recovery or Fastboot
Click to expand...
Click to collapse
Check if the oem option in developer locked again

flairepathos.info said:
Check if the oem option in developer locked again
Click to expand...
Click to collapse
I unlocked it before i started

swarzB said:
I unlocked it before i started
Click to expand...
Click to collapse
When you flash things (usually boot.img) it will lock it again
just check and confirm if its still unlocked
plug in your device and do adb reboot bootloader

flairepathos.info said:
When you flash things (usually boot.img) it will lock it again
just check and confirm if its still unlocked
plug in your device and do adb reboot bootloader
Click to expand...
Click to collapse
unfortunately for me my screen wont come on

Usually Its just stuck in engineer/ edl mode
So not to worry but try flashing using sp tools
Put your phone on charger for now
Then
If your phone not getting recognised by pc, unplug and wait for a 6-10 seconds and plugin again or plug in and hold Power+ Volume down or up button till pc recognises it, this will be handy later
here's a guide to flash via SP tools, or you can follow a youtube video to guide you along step by step
How to Flash Xiaomi Redmi Note 10 Pro Android phone - Easy and Working methods [2022]
Flashing Xiaomi Redmi Note 10 Pro Android phone can be difficult task! But not anymore, flash ROMs on your Xiaomi Redmi Note 10 Pro phone easily with this
flashifyit.com

Question Redmi Note 10 5G Global stuck on MIUI Recovery after update to 12.5.5.0

Hello all,
I just got the V12.5.5.0 update on my Redmi Note 10 5G (Global).
After I rebooted the system tapping the complete notification it is stuck on the MIUI Recovery screen.
My device is not rooted. It just has received OTA updates.
I tried to reboot the system a few times, but it didn't work.
Also, I tried the safe mode, but it didn't work either.
After Reboot or safe mode, it returns to the MIUI Recovery screen.
I haven't tried the Wipe Data option because I want to back up my files first if possible.
Is there any way to back up my files or be able to fix it?
Please help.
Thanks in advance.

the only solution is enter into fastboot mode and flash stock fastboot firmware via miflash or similar tool

wetito said:
the only solution is enter into fastboot mode and flash stock fastboot firmware via miflash or similar tool
Click to expand...
Click to collapse
I tried that, but I am getting an error saying not allowed in locked state. It looks like the bootloader is locked, so I tried to use the Mi Unlock tool but I am getting error 1004. Also I tried wipe data, but it didn't work either. Right now, I don't care loss my data, I just want to have my phone back, any help is appreciated. Thanks

I have the exact same problem, after the update, lock on recovery mode, then when I tried to flash stock fastboot firmware it says that it is locked. And I also can't access Mi Unlock Tool for some reason, so if anybody has a solution to unlock bootloader I would really appreciate it.
Thanks

I got this same issue. Is there any way we can report this to mi? I don't mind if I lose my data rn, I just want this to start working normally again. someone please help if you know how to fix this

jyeros said:
Hello all,
I just got the V12.5.5.0 update on my Redmi Note 10 5G (Global).
After I rebooted the system tapping the complete notification it is stuck on the MIUI Recovery screen.
My device is not rooted. It just has received OTA updates.
I tried to reboot the system a few times, but it didn't work.
Also, I tried the safe mode, but it didn't work either.
After Reboot or safe mode, it returns to the MIUI Recovery screen.
I haven't tried the Wipe Data option because I want to back up my files first if possible.
Is there any way to back up my files or be able to fix it?
Please help.
Thanks in advance.
Click to expand...
Click to collapse
Same here, albeit I have Chinese version on Global ROM

wetito said:
the only solution is enter into fastboot mode and flash stock fastboot firmware via miflash or similar tool
Click to expand...
Click to collapse
Have you downgraded? Tried to, but accidentally locked bootloader. And it shows that version I have installed isn't compatible.

Use MTK Bypass for reparing https://megafon929.github.io/mtk

Timenator said:
Have you downgraded? Tried to, but accidentally locked bootloader. And it shows that version I have installed isn't compatible.
Click to expand...
Click to collapse
i'm an absolute beginner at this stuff, so could you tell me how to downgrade it?

i suppose try booting in safe mode dint work. the only solution is flashing full firmware, cause the ota packet is bugged.
try this tool
Home - Tool All In One
TOOL ALL IN ONE This tool support 67 different devices of some different OEMs. DOWNLOAD CHANGELOG XDA THREAD OTHERS PROJECTS
toolaio.tk

Timenator said:
Have you downgraded? Tried to, but accidentally locked bootloader. And it shows that version I have installed isn't compatible.
Click to expand...
Click to collapse
I received the device yesterday, the update notification arrived and I installed it, I didn't imagine it could be a problem, I tried to reinstall the rom but the bootloader is also blocked, I don't know what else to do, I'm desperate.

LucciM-Anon said:
i'm an absolute beginner at this stuff, so could you tell me how to downgrade it?
Click to expand...
Click to collapse
Rafaelmaga said:
I received the device yesterday, the update notification arrived and I installed it, I didn't imagine it could be a problem, I tried to reinstall the rom but the bootloader is also blocked, I don't know what else to do, I'm desperate.
Click to expand...
Click to collapse
Found a solution on web. If your phone is on Mediatek(I suppose all Note 10 5g are Mediatek? or no?) So, if it is, just look for an unlocker. You will also need MiFlash and I recommend to install Global MIUI 12.5.4. https://xiaomifirmwareupdater.com/miui/camellian/stable/V12.5.4.0.RKSMIXM/ - MIUI
Step by step guide:
How to Fix Your Hard Bricked Xiaomi Phone With Locked Bootloader
If you are familiar with custom ROM or flashing your phone, then there's a possibility that you have tried flashing your Xiaomi/Redmi/POCO Phone. Earlier
gadgetstouse.com

Timenator said:
Found a solution on web. If your phone is on Mediatek(I suppose all Note 10 5g are Mediatek? or no?) So, if it is, just look for an unlocker. You will also need MiFlash and I recommend to install Global MIUI 12.5.4. https://xiaomifirmwareupdater.com/miui/camellian/stable/V12.5.4.0.RKSMIXM/ - MIUI
Step by step guide:
How to Fix Your Hard Bricked Xiaomi Phone With Locked Bootloader
If you are familiar with custom ROM or flashing your phone, then there's a possibility that you have tried flashing your Xiaomi/Redmi/POCO Phone. Earlier
gadgetstouse.com
Click to expand...
Click to collapse
unfortunately this tutorial doesn't work here, I followed everything but it still didn't unlock the bootloader

Hi guys, I just woke up and my phone was in MIUI Recovery mode, just like yours.. Probably made the update automatically.
It seems this is a recent problem for many of us. I'm nowhere near an expect but I will continue looking for the solution (if possible, without whiping out the data or at least to be able to back-it up).
Will really appreciate if somebody posts if they find a solution.
Thanks!

The only solution is to wipe the phone. I got my lesson I will buy a samsung now

Hello all,
I got the V12.5.5.0 update to on my Redmi Note 10 5G (Global).
After I rebooted the system tapping the complete notification it is stuck on the MIUI Recovery 5.0 screen.
My device is not rooted. It just has received OTA updates.
I tried to reboot the system a few times, but it didn't work.
Also, I tried the safe mode, but it didn't work either.
After Reboot or safe mode, it returns to the MIUI Recovery screen.
I have tried the Wipe Data option and it worked and got me back to MIUI V12.5.4.0. But unfornnatly i lost all my files (about 90 Gb of data).
And this is the last i install any MIUI update until i see that a lot of user's have install it review it

My Poco M3 Pro 5G Global wasn't affected.
I manually download the OTA package and installed successfully.
This phone has a/b slot.
I'm wondering those facing this issue, have you tried switching from a to b slot or vice versa?
fastboot --set-active=a
fastboot --set-active=b

guyz92 said:
My Poco M3 Pro 5G Global wasn't affected.
I manually download the OTA package and installed successfully.
This phone has a/b slot.
I'm wondering those facing this issue, have you tried switching from a to b slot or vice versa?
fastboot --set-active=a
fastboot --set-active=b
Click to expand...
Click to collapse
i think the ota released by xiaomi is bugged. you're operation is correct, but a correct ota might do this automatically. i have noticed that many users with unlocked bootloader, after the update have phone that dont boot. i think they cant enter on fastboot mode. the only solution is flash using mediatek SP FLASH TOOL. or MI FLASH PRO. or ALL IN ONE TOOL

Was someone able to access the "Connect with MIAssistant" part using pcsuite?
I couldn't, but I think it might be because the USB cable I'm using is not the original one from Xiaomi or one compatible.

work only if you have installed also pcsuite on your device. if u have a full stock loked device only solutions are Mediatek tool or miflash pro! or all in one tool. as i said a million time already