I was rooting with MI 8 with Elixir OS
The OS was unstable to I decided to swap another OS
But I realised I cannot get into recovery (like I can but its just stuck in the Main page (team win and orangefox)
I did try to replace recovery and their image but sadly none of them worked for me.
Is there any solution that I can fix my recovery?
Edit 1: I can still use my OS but is it bricked?
Th0m4ss said:
I was rooting with MI 8 with Elixir OS
The OS was unstable to I decided to swap another OS
But I realised I cannot get into recovery (like I can but its just stuck in the Main page (team win and orangefox)
I did try to replace recovery and their image but sadly none of them worked for me.
Is there any solution that I can fix my recovery?
Edit 1: I can still use my OS but is it bricked?
Click to expand...
Click to collapse
Start by resetting your phone:
https://forum.xda-developers.com/t/flash-tool-guide-use-xiaomi-flash-tool.4262425/
Dont relock the bootloader
select clean all(flash_all.bat)
Th0m4ss said:
I was rooting with MI 8 with Elixir OS
The OS was unstable to I decided to swap another OS
But I realised I cannot get into recovery (like I can but its just stuck in the Main page (team win and orangefox)
I did try to replace recovery and their image but sadly none of them worked for me.
Is there any solution that I can fix my recovery?
Edit 1: I can still use my OS but is it bricked?
Click to expand...
Click to collapse
I strongly recommend you to try below, because it worked for me.
This week I tried to change the ROM. I went from PE to EVX. Right after the first attempt to change recovery, it is stuck on the initial screen of the same.
What I did to solve it: I went back to PE Recovery, did a factory reset. After that I enabled the Update from ABD option. Then on my computer I uploaded the new ROM image via command line. It worked very well.
Install instructions from ADB e more:
Install PixelExperience on dipper - PixelExperience Wiki
Install PixelExperience on dipper - PixelExperience Wiki
wiki.pixelexperience.org
Related
So I followed the steps here to get TWRP on my phone and then flash the unofficial lineage OS ali on my motorola g6 and I got it done but it's not booting into the new OS but instead TWRP. How do I get rid of TWRP so that I can use my new system image?
Removing a recovery is always a bad idea and if you want to try a custom ROM you can always go for phussson's treble builds
I myself use AOSP 8.1 [V25] and it seems to be a daily driver material.
Either way if you want to remove TWRP, you can flash the stock recovery via fastboot.
trashprogrammer said:
So I followed the steps here to get TWRP on my phone and then flash the unofficial lineage OS ali on my motorola g6 and I got it done but it's not booting into the new OS but instead TWRP. How do I get rid of TWRP so that I can use my new system image?
Click to expand...
Click to collapse
You might have not cleared the PCB properly when you formatted data. You don't get rid of your recovery. While in TWRP have you tried selecting reboot system. Or reboot bootloader and then in bootloader select start.
Hi everyone,
I'm right now facing the issue that none of the flashed custom ROMs can boot.
I'm right now on MIUI 10.0.2.0, the bootloader is unlocked and TWRP was installed, but since I returned to the original global ROMs via XiaomiMiFlash Tool I think it's not on the decide anymore.
I tried to install Havoc and Pixel Experience.
What is the correct procedure to flashed the roms ?
I followed the instructions on the Havoc OS Thread for "Coming from MIUI 10.0.2.0". After installing the device kept boot looping and basically "flashing" the MI Logo with the "Unlocked" Label at the bottom.
Thank you for your time and help.
This could be a problem with your data partition and encryption. You need to full wipe your data (you loose all your sdcard data, so backup as much as possible) with twrp.
I used "Format Data" under "Wipe" in TWRP.
And I tried to run the decryption zip.
Same thing.
Lighthex said:
Hi everyone,
I'm right now facing the issue that none of the flashed custom ROMs can boot.
I'm right now on MIUI 10.0.2.0, the bootloader is unlocked and TWRP was installed, but since I returned to the original global ROMs via XiaomiMiFlash Tool I think it's not on the decide anymore.
I tried to install Havoc and Pixel Experience.
What is the correct procedure to flashed the roms ?
I followed the instructions on the Havoc OS Thread for "Coming from MIUI 10.0.2.0". After installing the device kept boot looping and basically "flashing" the MI Logo with the "Unlocked" Label at the bottom.
Thank you for your time and help.
Click to expand...
Click to collapse
Try this:
1. Flash MIUI PIE 8.12.20 global Rom DON'T REBOOT
2. Flash Disable_Dm-Verity_ForceEncrypt Here DON'T REBOOT
3. Wipe Data,System,Cache Your Data will be lost
4. Flash HavocRom + Gapps
5. Reboot and Enjoy
the link to the post is here: https://forum.xda-developers.com/mi-8/development/prepare-t3841106
I followed that instructions and now I'm at least seeing the boot logo, but its stuck at the animation.
I left it for 1 hour and it's not booting...
What can I do ?
Here I bring to you the official Havoc-os 4.X ROM Android 11 and fully functional on Redmi 8
The intention of this post is to make a step-by-step tutorial on the installation of this excellent GSI ROM on Redmi 8 and give assistance in the installation process
All the development credits for this wonderful ROM go to the Havoc team
@Ruturaj Kadam
@jhenrique09
@SKULSHADY
Remember I am not a developer, if you are presenting any bugs let us know and you can contact the Havoc team on Telegram
I am not responsible for any damage caused to your device by not following the steps or negligence at the time of this process, All the steps were carried out and tested on my personal device and are confirmed, My device Redmi 8 3/32, the version that i tested Havoc-OS-v4.5-20210208-Official-arm64-ab.img.xz
Bugs
videos recorded with the default camera do not play
Update: Install the NGCam_7.4.104-v1.8-fix.apk Once the application is installed open it take a photo close the application, this will create a folder in the SD called Gcam, inside the Gcam folder create a folder and call it Config7 and inside this place the XML file Redmi 8 GCam 7.4.104.314953318 G_Modder.xml restart the application and you're done
the only bugs that have is slow motion record not work for now
Automatic brightness does not work
Update: to fix the automatic brightness on your device, after installing the ROM, put in the folder SYSTEM-OVERLAY the treble-overlay-xiaomi-redmi 8.apk and set the permission for the apk on 644 ( use root explorer ) and reboot ..... problem solved
the necessary files are at the end of the tutorial
Steps
Note: I did the installation coming from Mui 12.EU, and there was no problem in the installation process or in the boot process
If you come from Miui12 .EU or any other GSI Rom go to step 4, if you come from the Rom stock follow the this steps
1- First make a backup of all the necessary information in case something goes wrong you can easily recover, Charge the battery at least 80%
All your data will be deleted during the process
2- Unlock the Bootloader if you have not already done it or do not know how to, follow this post: http://en.miui.com/unlock/
3- Install a custon recovery, if you dont know how to, follow this post: https://c.mi.com/thread-2850424-1-0.html
4- Make wipe only to Cache, Dalvik, System, Data and Internal SD
5- Format data,( if it doesn't format the data you will have bootloop) then Reboot into Recovery
6- Copy all the files to the phone (Havoc-OS-v4.X-20200522-Official-arm64-ab.img you can find it by unpacking the zip), Magisk,Magisk Path Fix, Permisiver, Certification Patch.zip, opengapp (recommended nano or pico)
7- Install system image to system partition (on TWRP go to install-Install image-System) .
8- Flash Permisiver v5 (on TWRP go to install selec permisver_v5.zip)
9- Resize system partition to flash opengapps (on TWRP go to Wipe-Advanced Wipe-Select System on the list-Repair or Change File System-Resize)
To Root
once you have installed an resized the system
10- Flash the Magisk path fix (on TWRP go to install selec MagiskA11_PATH_fix.zip)
11- Flash Magisk (on TWRP go to install selec Magisk-v23.0.zip)
12- Flash Opengapps
1-Flash Certification Patch
1 - Make a wipe to Cache and Dalvik
1- Reboot
The boot process takes 5 to 10 minutes the first boot, in case of any problem in any of the stages you can reinstall Miui version fastboot with Mi flash tool and start again
Download link Rom image:
arm64-ab • Havoc-OS
Havoc-OS Downloads
download.havoc-os.com
OpenGapss Android 11: https://sourceforge.net/projects/opengapps/files/arm64/test/20210130/
Magisk:
Download Magisk Manager Latest Version 26.1 For Android 2023
Magisk Manager is an app which helps users to root their phone. With the help of Magisk you can run banking apps and also pass SafetyNet tests.
magiskmanager.com
Hey !
I have a stupid question. Do you upload the GSI ROM and the other files on a SD card or on the internal storage ? I was searching this guide on the morning but I was wondering about that...
Thanks for your answer
letouvetpierre said:
Hey !
I have a stupid question. Do you upload the GSI ROM and the other files on a SD card or on the internal storage ? I was searching this guide on the morning but I was wondering about that...
Thanks for your answer
Click to expand...
Click to collapse
Don't mind it, I haven't read all the article....
letouvetpierre said:
Hey !
I have a stupid question. Do you upload the GSI ROM and the other files on a SD card or on the internal storage ? I was searching this guide on the morning but I was wondering about that...
Thanks for your answer
Click to expand...
Click to collapse
You can place it in either of the two, as long as you can access the storage where you placed them from the recovery
D
letouvetpierre said:
Don't mind it, I haven't read all the article....
Click to expand...
Click to collapse
Dont worry
Darth Inferno said:
You can place it in either of the two, as long as you can access the storage where you placed them from the recovery
Click to expand...
Click to collapse
Okay thanks I think I will try this in the few days. Thanks for your guide !
Hey ! Do we need to flash a vbmeta image for Havocon boot ?
Is there any bugs when you install Havoc with TWRP ? 'cuz i'm a little bit experimented with TWRP but i'm shy with GSI...
Thanks for the answer
UPDATE :
I bricked my phone. When i arrived to the step 5 and i rebooted into fastboot (i would reboot into recovery...)
So, what can I do ? I installed MiFlashTool to unbrick my phone, if it can...
I tried to reboot from fastboot to twrp and this is what happened :
fastboot boot twrp.img
downloading 'boot.img'...
OKAY [ 2.141s]
booting...
FAILED (remote: unknown reason)
finished. total time: 2.771s
Thanks...
letouvetpierre said:
UPDATE :
I bricked my phone. When i arrived to the step 5 and i rebooted into fastboot (i would reboot into recovery...)
So, what can I do ? I installed MiFlashTool to unbrick my phone, if it can...
I tried to reboot from fastboot to twrp and this is what happened :
fastboot boot twrp.img
downloading 'boot.img'...
OKAY [ 2.141s]
booting...
FAILED (remote: unknown reason)
finished. total time: 2.771s
Thanks...
Click to expand...
Click to collapse
Hi, I need to know some things to help you, what ROM did you have before flashing Havoc? do you have the bootloader unlocked? When did you use My flashtool, what method did you use?
letouvetpierre said:
Hey ! Do we need to flash a vbmeta image for Havocon boot ?
Is there any bugs when you install Havoc with TWRP ? 'cuz i'm a little bit experimented with TWRP but i'm shy with GSI...
Thanks for the answer
Click to expand...
Click to collapse
In my particular case it was not necessary to flash vbmmeta as I comment in the OP I come from Miui12.eu, but it is necessary to avoid problems whatever the ROM you have before installing Havoc is to have the latest version of TWRP and have configured a lock pattern security in ROM access and in the flashing process I didn´t have problems
Hey!
I was on the stock ROM when i started to flash HavocOs.
I unbricked my phone with the MIUnlockTool V2 and my phone's still alive.
I booted on TWRP with fastboot boot TWRP.img 'cuz I can't boot to TWRP with volume up and power...
How can I flash HavocOs in the good way ?
I have Redmi 8 3/32 like you...
letouvetpierre said:
Hey!
I was on the stock ROM when i started to flash HavocOs.
I unbricked my phone with the MIUnlockTool V2 and my phone's still alive.
I booted on TWRP with fastboot boot TWRP.img 'cuz I can't boot to TWRP with volume up and power...
How can I flash HavocOs in the good way ?
I have Redmi 8 3/32 like you...
Click to expand...
Click to collapse
Ok the first thing is that you have the bootloader unlocked, if it is that way regardless of the stock version of the rom you have when installing twrp you must install magisk to ensure that the Recovery remains fixed in this link is a tutorial on how to install it, that tutorial was made by me and approved by Xiaomi https://c.mi.com/thread-2850424-1-0.html ,
install the latest version of TWRP and as it says in the tutorial then flash magisk, once you have everything ready install miui 12.eu do not do many settings except create a blocking pattern when starting the rom this is used by TWRP to be able to decrypt the internal memory
All ready do the steps as indicated in this tutorial (If you come from Miui12 .EU or any other GSI Rom go to step 4)
If for some reason you have a problem, use MI flashtool to return to the stock rom, but make sure to use the snapdragon method, select MIflash and when opening the screen at the bottom select clean all, this will prevent you from blocking the bootloader and you can start again without problems (note when selecting clean all at the end it will give you an error for not being able to block the bootloader and the device will restart, do not worry it will restart normally without problems)
Darth Inferno said:
Ok the first thing is that you have the bootloader unlocked, if it is that way regardless of the stock version of the rom you have when installing twrp you must install magisk to ensure that the Recovery remains fixed in this link is a tutorial on how to install it, that tutorial was made by me and approved by Xiaomi https://c.mi.com/thread-2850424-1-0.html ,
install the latest version of TWRP and as it says in the tutorial then flash magisk, once you have everything ready install miui 12.eu do not do many settings except create a blocking pattern when starting the rom this is used by TWRP to be able to decrypt the internal memory
All ready do the steps as indicated in this tutorial (If you come from Miui12 .EU or any other GSI Rom go to step 4)
If for some reason you have a problem, use MI flashtool to return to the stock rom, but make sure to use the snapdragon method, select MIflash and when opening the screen at the bottom select clean all, this will prevent you from blocking the bootloader and you can start again without problems (note when selecting clean all at the end it will give you an error for not being able to block the bootloader and the device will restart, do not worry it will restart normally without problems)
Click to expand...
Click to collapse
Hey!
I thought about something this afternoon : if I flash HavocOS with adb and fastboot, we also haven't any problems with TWRP installation ! But the problem is that I haven't found any wiki to do that and i won't transform my phone to a beta tester....
Thanks a lot for your help but I think i will wait until a custom rom of LineageOs or HavocOs...
Hi . I am currently running havoc is 3.12 on my device I tried multiple times to flash this ROM without any success. Is not installing open gapps a problem ? Anyways when I flash this rom without flashing the certification patch I get a no os installed warning before rebooting from orange fox recovery but when I flash the certification I no longer get this message. Etherway I am getting stuck on a bootloop . How can I solve this issue? I did all the steps correctly wiping the correct partitions and formating data . Edit I wiped cache and dalvik after the bootloop without any success .
Dragonnuu said:
Hi . I am currently running havoc is 3.12 on my device I tried multiple times to flash this ROM without any success. Is not installing open gapps a problem ? Anyways when I flash this rom without flashing the certification patch I get a no os installed warning before rebooting from orange fox recovery but when I flash the certification I no longer get this message. Etherway I am getting stuck on a bootloop . How can I solve this issue? I did all the steps correctly wiping the correct partitions and formating data . Edit I wiped cache and dalvik after the bootloop without any success .
Click to expand...
Click to collapse
Hey !
I had the same bug before installing the v3.12 version.
I think it goes from the Permissiver v5. I think we should flash it to have the Havoc v4.
I'll test later if I have the time to do this and I'll inform you about the possibilities.
Hope I can help.
letouvetpierre said:
Hey !
I had the same bug before installing the v3.12 version.
I think it goes from the Permissiver v5. I think we should flash it to have the Havoc v4.
I'll test later if I have the time to do this and I'll inform you about the possibilities.
Hope I can hel
Click to expand...
Click to collapse
Thanks for replying and trying to help but last night I managed to get havoc 4.1 is installed by flashing lineage first (using another guide from this category). I will try again to get havoc 4.1 working without flashing lineage as soon as posible because I am curious .
Used online available guides bit still not able to install magisk on Hovoc 4.1
Anyone succeeded?
mwaseem851 said:
Used online available guides bit still not able to install magisk on Hovoc 4.1
Anyone succeeded?
Click to expand...
Click to collapse
Magisk doesn't work on Android 11
letouvetpierre said:
Magisk doesn't work on Android 11
Click to expand...
Click to collapse
Finally managed to flash Magisk on Havoc 4.1 with the help of youtuberking (telegram and YouTube).
How: just flash Magisk path fix before magisk and it's good to go.
Hello everyone. I was trying to flash a magisk img to my phone and I fail it and let it stuck on the fastboot. I tried using the offical miFlash tools with the globle rom and it didnt work. Also my phone cant boot into the recovery mode. So how can I unbrick my phone? Thanks.
(Im also new to root and mod my phone)
Chllucas said:
Hello everyone. I was trying to flash a magisk img to my phone and I fail it and let it stuck on the fastboot. I tried using the offical miFlash tools with the globle rom and it didnt work. Also my phone cant boot into the recovery mode. So how can I unbrick my phone? Thanks.
(Im also new to root and mod my phone)
Click to expand...
Click to collapse
Check if everything has been done correctly.https://forum.xda-developers.com/t/flash-tool-guide-use-xiaomi-flash-tool.4262425/
If ok post the Miflash log.
Hi! Easiest way to fix this is to download a recovery rom for mi11t pro, boot into TWRP (you can look for it at this forum, no need to flash just fastboot boot into twrp.img) copy the rom.zip into mi 11t pro and install from TWRP. Hope it helps!
Chllucas said:
Hello everyone. I was trying to flash a magisk img to my phone and I fail it and let it stuck on the fastboot. I tried using the offical miFlash tools with the globle rom and it didnt work. Also my phone cant boot into the recovery mode. So how can I unbrick my phone? Thanks.
(Im also new to root and mod my phone)
Click to expand...
Click to collapse
Thanks for all reply. I got it now thanks.
shanreecodr said:
Hi! Easiest way to fix this is to download a recovery rom for mi11t pro, boot into TWRP (you can look for it at this forum, no need to flash just fastboot boot into twrp.img) copy the rom.zip into mi 11t pro and install from TWRP. Hope it helps!
Click to expand...
Click to collapse
Hi, i know is been months since this. But i have sort of the same problem.
I am new user to android and bought a 11t pro, so when following youtube video instructions to instal the twrp recovery into the phone; after it, when trying to restart it, it automatically takes me to the fastboot screen, doesn't matter the combination, it automatically takes me to the fasboot screen. I can access the twrp menu, but nothing else. What i think it happened is that i used a wrong recovery file.
What recovery file should i be using? or how do i remove the twrp to start over again?
it has android 11, global 12.5.10 for what i remember
UnknownJedi said:
Hi, i know is been months since this. But i have sort of the same problem.
I am new user to android and bought a 11t pro, so when following youtube video instructions to instal the twrp recovery into the phone; after it, when trying to restart it, it automatically takes me to the fastboot screen, doesn't matter the combination, it automatically takes me to the fasboot screen. I can access the twrp menu, but nothing else. What i think it happened is that i used a wrong recovery file.
What recovery file should i be using? or how do i remove the twrp to start over again?
it has android 11, global 12.5.10 for what i rememb
Click to expand...
Click to collapse
No twrp for this device.
Sorry.but the thread is about 11 t pro.so.(wrong links).
NOSS8 said:
Youtube tutorials are not 100% reliable.
Instructions
Install TWRP for Xiaomi 11T Pro
Perform this at your own risk. You might LOSE all data on your phone. ( I'm not responsible for any damage to your device ) // Update: OrangeFox Recovery Project for Xiaomi 11T Pro (vili) with the same installation instructions. Caution: this...
forum.xda-developers.com
TWRP
Recovery for Xiaomi devices - Browse /vili at SourceForge.net
List of relevant recovery in one place
sourceforge.net
No official A11 TWRP.
If the system is in A12 use the TWRP A12, etc...
Click to expand...
Click to collapse
hi, i followed the instructions on the links you provided. and it turned a little bit worst XD.
when installing the twrp from the link it still leaves me at the fastboot screen, and when trying to enter the twrp menu the touchscreen is disabled.
is there a way to remove the twrp previously installed? or whats the best option here?
You should have posted this forum dedicated to 11T, it would have avoided all these errors.
Xiaomi 11T
The Xiaomi 11T is a 6.67" device with a 1080x2400 AMOLED 120Hz display. It has a MediaTek MT6893 octa-core chipset, with 8GB of RAM and either 128GB or 256GB internal storage. The main camera is a 108/8/5MP, with a 16MP selfie camera up front. The Xiaomi 11T is powered by a 5000mAh battery with...
forum.xda-developers.com
UnknownJedi said:
hi, i followed the instructions on the links you provided. and it turned a little bit worst XD.
when installing the twrp from the link it still leaves me at the fastboot screen, and when trying to enter the twrp menu the touchscreen is disabled.
is there a way to remove the twrp previously installed? or whats the best option here?
Click to expand...
Click to collapse
No twrp for this device.(AGATE).
The link provided is for 'VILI'
Update your phone.
Do not relock the bootloader
MIFLASH[GUIDE]⚙ USE XIAOMI FLASH TOOL
FOR ALL XIAOMI BOOTLOADER MUST BE UNLOCKED https://new.c.mi.com/global/post/101245 https://en.miui.com/unlock/index.html ----------------------------------------------------------------------------------------------------------- All your data...
forum.xda-developers.com
UnknownJedi said:
Hi, i know is been months since this. But i have sort of the same problem.
I am new user to android and bought a 11t pro, so when following youtube video instructions to instal the twrp recovery into the phone; after it, when trying to restart it, it automatically takes me to the fastboot screen, doesn't matter the combination, it automatically takes me to the fasboot screen. I can access the twrp menu, but nothing else. What i think it happened is that i used a wrong recovery file.
What recovery file should i be using? or how do i remove the twrp to start over again?
it has android 11, global 12.5.10 for what i remember
Click to expand...
Click to collapse
Flashing it back to stock will fix your issue.
mvikrant97 said:
Flashing it back to stock will fix your issue.
Click to expand...
Click to collapse
hi, how do i do that? still trying to figure out this android universe.
The answer is there.
Help My Xiaomi 11t pro stuck on the fastboot.
Hello everyone. I was trying to flash a magisk img to my phone and I fail it and let it stuck on the fastboot. I tried using the offical miFlash tools with the globle rom and it didnt work. Also my phone cant boot into the recovery mode. So how...
forum.xda-developers.com
All,
I'm attempting to figure out whether something in my flashing process broke down for one Zenfone 8 in particular that results in an unusable LineageOS 18.1 OS. This one particular phone was in a fastboot cycle that would not load the LineageOS Recovery mode or OS until I flashed the `dtbo.img` file. That fixed the fastboot and I was able to then sideload the OS.
However, the OS comes up with a white screen and extreme unresponsiveness. It's unusable. Other phones whereby I followed the same process (but did NOT need to flash `dtbo.img`) are working just fine.
I've run through the flashing process multiple times on the problem phone w/ no luck. Any thoughts appreciated. Should I get the phone back to complete stock and try again?
Flashing Process
-------------------------------
1. Unlock tool APK, unlock, etc.
2. fastboot flash vendor_boot sake_vendor_boot.img
3. fastboot flash boot recovery.img
a. When in fastboot cycle, I then flash `dtbo.img`, but I've only done this on the problematic phone
4. Factory reset
5. Restart, Recovery Mode, Update via ADB
6. adb sideload lineage.zip
chingtastical said:
All,
I'm attempting to figure out whether something in my flashing process broke down for one Zenfone 8 in particular that results in an unusable LineageOS 18.1 OS. This one particular phone was in a fastboot cycle that would not load the LineageOS Recovery mode or OS until I flashed the `dtbo.img` file. That fixed the fastboot and I was able to then sideload the OS.
However, the OS comes up with a white screen and extreme unresponsiveness. It's unusable. Other phones whereby I followed the same process (but did NOT need to flash `dtbo.img`) are working just fine.
I've run through the flashing process multiple times on the problem phone w/ no luck. Any thoughts appreciated. Should I get the phone back to complete stock and try again?
Flashing Process
-------------------------------
1. Unlock tool APK, unlock, etc.
2. fastboot flash vendor_boot sake_vendor_boot.img
3. fastboot flash boot recovery.img
a. When in fastboot cycle, I then flash `dtbo.img`, but I've only done this on the problematic phone
4. Factory reset
5. Restart, Recovery Mode, Update via ADB
6. adb sideload lineage.zip
Click to expand...
Click to collapse
HI
Lineage OS 18.x is based on Android 11 as far as I know so I suggest to install the original ASUS Android 11 raw image and then reinstall the LineageOS using the install instructions from LineageOS.
The raw image for Android 11 on the ASUS Zenfone 8 is available on this Website:
https://www.asus.com/Content/Android-12-Beta/
in the section
How to opt-out and revert back to Android 11
at the end of the page
That's how I reinstall my development Zenfone 8 from 12 to 11 or vice versa.
regards
Bernd
Just wanted to thank you for the information you posted; the re-flash to stock download worked perfectly for what I needed.