Related
I wanna sell my phone. But i installed MIUI12 Beta Stable V12.0.2.0.QJOMIXM witch cleary has bugs and lags hard on some gaming. Is there a way to roll back to MIUI 11 with no custom recovery? Can i simply flash an older ROM thru Mi FLASH?
god itself cant do that even :|
Don`t even try
fabianowerner said:
I wanna sell my phone. But i installed MIUI12 Beta Stable V12.0.2.0.QJOMIXM witch cleary has bugs and lags hard on some gaming. Is there a way to roll back to MIUI 11 with no custom recovery? Can i simply flash an older ROM thru Mi FLASH?
Click to expand...
Click to collapse
I wouldn't try that, remember Xiaomi has Anti-Rollback Protection (ARP), which prevents for security reasons to rollback to a previous MIUI version. When protection gets triggered a hardbrick may occur, or luckily just soft-boot.
About ARP: https://www.xda-developers.com/xiaomi-anti-rollback-protection-brick-phone/
However, I'm not sure which model of RN9 do you have, but if you're running Global version, it's ROM was recently updated to 12.0.3 and shows as "Stable". I would consider a much better option, trying to update to that one, specially if you haven't root your phone or installed a custom recovery.
Here's the link for it https://bigota.d.miui.com/V12.0.3.0.QJOMIXM/miui_MERLINGlobal_V12.0.3.0.QJOMIXM_0ec44a5b7d_10.0.zip
If you notice from the entry dealing with RN9 firmware on this page https://www.xda-developers.com/down...ing-out-several-xiaomi-redmi-mi-poco-devices/ the version you've installed has been rolled back (perhaps because of the problems you've been having) in favour of V12.0.3.0.QJOMIXM, mentioned by @ma259 above
fabianowerner said:
I wanna sell my phone. But i installed MIUI12 Beta Stable V12.0.2.0.QJOMIXM witch cleary has bugs and lags hard on some gaming. Is there a way to roll back to MIUI 11 with no custom recovery? Can i simply flash an older ROM thru Mi FLASH?
Click to expand...
Click to collapse
You need to unlock your phone and to flash it with official rom on miui 11.0.5.0 with miflash
fabianowerner said:
I wanna sell my phone. But i installed MIUI12 Beta Stable V12.0.2.0.QJOMIXM witch cleary has bugs and lags hard on some gaming. Is there a way to roll back to MIUI 11 with no custom recovery? Can i simply flash an older ROM thru Mi FLASH?
Click to expand...
Click to collapse
It can be done very easily.
Unlock bootloader, go to fastboot mode.
type
fastboot reboot fastboot.
Your phone should boot into fastbootd mode.
After that,
fastboot erase system
fastboot erase vendor
Then you can normally flash MIUI 11 with Mi Flash in fastboot mode.
Make sure you install these drivers. https://drive.google.com/file/d/1JFYCZ3mu_Y_xpnS7QrmtwqOeFnWg6DO2/view
Other way around without unlocking bootloader, turn off phone, install the drivers above and connect your device to your PC.
Use sp flash tool to flash MIUI 11.
The MiFlash method is safer, SP flash method is faster.
peterliyama said:
god itself cant do that even :|
Click to expand...
Click to collapse
Please, do not give wrong information. Do not reply if you don't know the answer.
Hi! I buyed a CN version of Mi 11. Is there any link with the official Global rom for Mi 11 that was rleased today ? Any tutorial?
Thanks!
As far as I know, the Mi 11 Global version won't be available before February 25th (at least here in Europe), so I doubt the global ROM is available yet. Most people recommend the xiaomi.eu ROM over the global ROM because it has some extra features and so on.
I recommend you use Xiaomi.eu's ROM, there's a thread explaining how to do it here. Also, don't forget to unlock your bootloader - you need to wait 7 days before it can be unlocked, so if you start the process today, you'll be able to flash custom ROMs in a week.
https://c.mi.com/thread-3581378-1-0.html
Thanks guys!
marcoshmaciel said:
Thanks guys!
Click to expand...
Click to collapse
Did you managed to install it ? When I try, it send me back to bootloader. (Using Miui 12.5 EU)
DarckZian said:
Did you managed to install it ? When I try, it send me back to bootloader. (Using Miui 12.5 EU)
Click to expand...
Click to collapse
Installation ok for me. Like u i was on xiaomi.eu lastest. there is a smalll error : This error is caused because the tool verifies if the device’s bootloader has been locked or not. Since you used the ‘clean all’ or ‘save user data’ option, the bootloader is not locked and the error is shown. This is a problem with the tool itself and is nothing to be worried about since the verification takes place after the flash is fully complete.
rafik25 said:
Installation ok for me. Like u i was on xiaomi.eu lastest. there is a smalll error : This error is caused because the tool verifies if the device’s bootloader has been locked or not. Since you used the ‘clean all’ or ‘save user data’ option, the bootloader is not locked and the error is shown. This is a problem with the tool itself and is nothing to be worried about since the verification takes place after the flash is fully complete.
Click to expand...
Click to collapse
You don't mind if I abuse you since you the first known to successfully flash the global rom?
Therefore, my bunch of questions are:
1. Did you use the fastboot version of rom (unzipped tgz)?
2. You did dirty flash form eu rom or did you clear data before flash?
3. You don't have any modem issue, all mobile bands and both wifi (2.4 and 5)?
4. Like first impression: do you still experience massive battery consumption?
5. What are major differences between eu and global?
6. Is the rom smooth and responsive or you experience any malfunctions so far?
7. Google Pay works? If you don't use it, could you be so kind and install safety net tester and report the results?
8. Could you still use phone calls recorder?
Thank you for your patient and contribution.
Yes of course
1. fastboot version
2.Form xiaomi.eu rebooting in faastboot mod and flashing fastboot version with mi flash with clean all option.
3. No mobile or wifi issues
4. all gms are installed ( google phone dialer and sms )
Sorry bro fresh installation i cant say more im at work
i dont use google pay and safety net failed
Rom is smooth but orange bloatware are downloaded
rafik25 said:
Yes of course
1. fastboot version
2.Form xiaomi.eu rebooting in faastboot mod and flashing fastboot version with mi flash with clean all option.
3. No mobile or wifi issues
4. all gms are installed ( google phone dialer and sms )
Sorry bro fresh installation i cant say more im at work
i dont use google pay and safety net failed
Rom is smooth but orange bloatware are downloaded
Click to expand...
Click to collapse
I don't want to install the xiaomi.eu because of the OTA updates and more. I want to flash the official global version of miui.
For this official global rom I still need to unlock the bootloader or can I flash over the chinese version? Sorry for the nob question. I'm new to Xiaomi phones.
marcoshmaciel said:
I don't want to install the xiaomi.eu because of the OTA updates and more. I want to flash the official global version of miui.
Click to expand...
Click to collapse
Just as a warning - if you decide to flash the official ROM, DO NOT RE-LOCK YOUR BOOT LOADER.
See this post.
Up to this thread
Xiaomi lied about the mi 11 launching with miui 12.5.
hulkyboi said:
Xiaomi lied about the mi 11 launching with miui 12.5.
Click to expand...
Click to collapse
No they didn't, it was always launching with miui 12. Irrelevant anyway
rafik25 said:
Yes of course
1. fastboot version
2.Form xiaomi.eu rebooting in faastboot mod and flashing fastboot version with mi flash with clean all option.
3. No mobile or wifi issues
4. all gms are installed ( google phone dialer and sms )
Sorry bro fresh installation i cant say more im at work
i dont use google pay and safety net failed
Rom is smooth but orange bloatware are downloaded
Click to expand...
Click to collapse
Could you please show me where to download the global rom. The link given below does not work.
Fastboot Flash 4.1G
http://bigota.d.miui.com/V12.0.1.0.RKBEUOR/venus_eea_or_global_images_V12.0.1.0.RKBEUOR_20210127.0000.00_11.0_eea_482ce39234.tgz
Thanks.
[email protected] said:
Could you please show me where to download the global rom. The link given below does not work.
Fastboot Flash 4.1G
http://bigota.d.miui.com/V12.0.1.0.RKBEUOR/venus_eea_or_global_images_V12.0.1.0.RKBEUOR_20210127.0000.00_11.0_eea_482ce39234.tgz
Thanks.
Click to expand...
Click to collapse
Look up and you'll see it
Mackay53 said:
Look up and you'll see it
Click to expand...
Click to collapse
Are you talking about this link: https://c.mi.com/thread-3581378-1-0.html
If you are, the download link provided in the above url does not work and it is the same link I mentioned earlier.
piskr said:
You don't mind if I abuse you since you the first known to successfully flash the global rom?
Therefore, my bunch of questions are:
1. Did you use the fastboot version of rom (unzipped tgz)?
2. You did dirty flash form eu rom or did you clear data before flash?
3. You don't have any modem issue, all mobile bands and both wifi (2.4 and 5)?
4. Like first impression: do you still experience massive battery consumption?
5. What are major differences between eu and global?
6. Is the rom smooth and responsive or you experience any malfunctions so far?
7. Google Pay works? If you don't use it, could you be so kind and install safety net tester and report the results?
8. Could you still use phone calls recorder?
Thank you for your patient and contribution.
Click to expand...
Click to collapse
hello I have my mi 11 on the global rom for 1 week
I flashed my phone with the fastboot rom (adb) and everything went well (if the phone restarts in fastboot mode, force the boot in recovery mode and does a data factory reset whip)
google pay works fine for me
my phone works without problem (no slowdown, no problem with the wifi connection on the phone, all Google services work perfectly)
after the rest has already been said
[email protected] said:
Are you talking about this link: https://c.mi.com/thread-3581378-1-0.html
If you are, the download link provided in the above url does not work and it is the same link I mentioned earlier.
Click to expand...
Click to collapse
Right Klick, Open in new TAB, than it works ;-)
luuxis said:
hello I have my mi 11 on the global rom for 1 week
I flashed my phone with the fastboot rom (adb) and everything went well (if the phone restarts in fastboot mode, force the boot in recovery mode and does a data factory reset whip)
google pay works fine for me
my phone works without problem (no slowdown, no problem with the wifi connection on the phone, all Google services work perfectly)
after the rest has already been said
Click to expand...
Click to collapse
So, first i have to install xiaomi.eu-rom? Is that the right order?
I am on the china model M2102K1C with the global rom installed. I rooted using the following method https://forum.xda-developers.com/t/...irmware-download-needed.4301241/post-85282829 which meant not overwriting the recovery and only booting thru the twrp file in my adb folder. This made it possible to get OTAs.
I just got the update available for download message and before I install it I would like to be sure I can re root using the same method and that the twrp version still works on miui 13.
the reason i want to check first is that i remember using other phones that sometimes a major update had necessitated an update for twrp to work with it.
you can root on miui 13 by patching the boot.img , like on all android 12 releases. Due to non working twrp on a12.
So if you want a working TWRP you cant update.. After update to miui 13 it will be a12.
use this link for info: https://xiaomi.eu/community/threads/howto-magisk-install-without-twrp.64511/#post-643958
marcel112 said:
you can root on miui 13 by patching the boot.img , like on all android 12 releases. Due to non working twrp on a12.
So if you want a working TWRP you cant update.. After update to miui 13 it will be a12.
use this link for info: https://xiaomi.eu/community/threads/howto-magisk-install-without-twrp.64511/#post-643958
Click to expand...
Click to collapse
thanks I have rooted several other phones on A12. I might wait until I research a bit more on this one as its my first Xiaomi phone. I was hoping the TWRP made for android 11 would still work on A12. ...or if i can hold off wait until there is a twrp for this phone compatible with A12.
tensux said:
thanks I have rooted several other phones on A12. I might wait until I research a bit more on this one as its my first Xiaomi phone. I was hoping the TWRP made for android 11 would still work on A12. ...or if i can hold off wait until there is a twrp for this phone compatible with A12.
Click to expand...
Click to collapse
idk, i know there are working a12 twrp for mi 10 and 10 pro, but i dont know when and if it will come for 11 ultra. and when it will come... there are no twrp files for yet... if it is only for root, just use pathed boot.img.... its really easy
marcel112 said:
idk, i know there are working a12 twrp for mi 10 and 10 pro, but i dont know when and if it will come for 11 ultra. and when it will come... there are no twrp files for yet... if it is only for root, just use pathed boot.img.... its really easy
Click to expand...
Click to collapse
thanks I know I am going to end up trying it. with the other phones I was more familiar with fixing a soft brick, so that's why I am nervous about it. I already started the upgrade haha.
its nearly impossible to brick this device( i am told, lol)
You can allways reflash using miflash to stock, just be aware off untick lock
marcel112 said:
its nearly impossible to brick this device( i am told, lol)
You can allways reflash using miflash to stock, just be aware off untick lock
Click to expand...
Click to collapse
uggh looks like I am going to need to learn how to use miflash. im not sure what i did. I didnt flash anything but rebooted to system from fastboot, and now the screen is blank. My laptop recognizes enough to beep when i plug and unplug the usb cord, but adb does not see it.
read this https://forum.xda-developers.com/t/global-miui-13-link-added-awesome-update.4410931/post-86528887
adn this https://forum.xda-developers.com/t/new-to-mi-11-ultra-with-rom-problems.4411617/post-86527355
tensux said:
uggh looks like I am going to need to learn how to use miflash. im not sure what i did. I didnt flash anything but rebooted to system from fastboot, and now the screen is blank. My laptop recognizes enough to beep when i plug and unplug the usb cord, but adb does not see it.
Click to expand...
Click to collapse
For some reason it is losing sanity when you have an open BL and twrp etc installed and trying to update to miui13. Just make sure you have a backup.
I have never used MiFlash before. I believe my computer does see the phone. I was on miui_STARGlobal_V13.0.2.0.SKAMIXM_eecc15ab63_12.0. I am not finding a global fastboot rom for A12 (only the full rom).
The previous versions 12.58 does have a fastboot rom available. Using other phones it was not always possible to downgrade. Would it be possible to flash 12.5.8 on this, or will I need to flash the china version of A12 that has a fastboot rom available?
marcel112 said:
you can root on miui 13 by patching the boot.img , like on all android 12 releases. Due to non working twrp on a12.
So if you want a working TWRP you cant update.. After update to miui 13 it will be a12.
use this link for info: https://xiaomi.eu/community/threads/howto-magisk-install-without-twrp.64511/#post-643958
Click to expand...
Click to collapse
Problem is you can use watever boot img or the one from the specific fastboot rom? because I updated to global 13.0.2 and there is no fastboot version available yet and so no boot img
xNAPx said:
Problem is you can use watever boot img or the one from the specific fastboot rom? because I updated to global 13.0.2 and there is no fastboot version available yet and so no boot img
Click to expand...
Click to collapse
also stuck on this issue, do you know which boot image source we use now? i am also on 13,0,2 global and need root...
There is, take a look at the "beta" thread, it has all you need for A13 rooting
munky-head said:
There is, take a look at the "beta" thread, it has all you need for A13 rooting
Click to expand...
Click to collapse
thanks, but can you be a bit more specific, ive been rooting my every android but this is my first Xioami ever so i am new to this.... which beta thread - a beta firmware - higher version which i download and extract to get the boot.img?
thanks
Yes. Whatever version you have installed, you can find a suitable root image from the link:
xdroms
Download xdroms for free. None
sourceforge.net
Then, it's a matter of typing fastboot flash boot rooted_boot.img and fastboot boot rooted_boot.img (with rooted_boot being whatever image you're running).
I'm currently running the latest Global Stable version, so the root I flashed was [ROOT]miui_STARIDGlobal_V13.0.2.0.SKAIDXM_8e7ececfcf_12.0_by_XD
munky-head said:
Yes. Whatever version you have installed, you can find a suitable root image from the link:
xdroms
Download xdroms for free. None
sourceforge.net
Then, it's a matter of typing fastboot flash boot rooted_boot.img and fastboot boot rooted_boot.img (with rooted_boot being whatever image you're running).
I'm currently running the latest Global Stable version, so the root I flashed was [ROOT]miui_STARIDGlobal_V13.0.2.0.SKAIDXM_8e7ececfcf_12.0_by_XD
Click to expand...
Click to collapse
There is also [ROOT]miui_STARGlobal_V13.0.2.0.SKAMIXM_eecc15ab63_12.0_by_XD.7z
Which one is best for the latest Global stable 13.0.2.0? It also says [Root], what does it mean? It is already rooted? As far as I know with the fastboot method you need to patch the boot.img via magisk first and than flash it via adb
It's a pre-patched boot.img file
So we just need to flash it, but which one of the two?
tensux said:
thanks I have rooted several other phones on A12. I might wait until I research a bit more on this one as its my first Xiaomi phone. I was hoping the TWRP made for android 11 would still work on A12. ...or if i can hold off wait until there is a twrp for this phone compatible with A12.
Click to expand...
Click to collapse
I wait to for the TWRP and im happy for that, Miu 12.5.20 is rock stable... All i want for my phone
xNAPx said:
So we just need to flash it, but which one of the two?
Click to expand...
Click to collapse
you got it working?
I came to this just by occasion while trying different things with the phone.
Please keep in mind that there were 4 testers, but only 2 successful installations have been reported. Please consider participating in testing
So, the instruction itself:
Download the latest china fastboot ROM
Download your preferred, but one of the latest Recovery global ROM (I recommend Taiwan)
From recovery archive, with the help of payload-dumper-go extract vendor partition:payload-dumper-go -p vendor payload_bin_or_recovery_rom
Flash China ROM, then reboot to fastbootd: fastboot reboot fastboot
Flash vendor: fastboot flash vendor vendor.img
Flash patched vbmeta (you can find it yourself)
Now the system should boot just fine (dm-verity still may occur, but that's not critical)
How to OTA:
After the system prompts you for reboot, reboot into fastbootd: adb reboot fastboot and flash your vendor again, then flash pathced vbmeta
Problems:
On POCO, POCO launcher is being installed and it doesn't work. The fix is down this post
No Google services included, flash WeebGApps in Magisk. SafetyNet attestation WON'T WORK! AT ALL!
Everything else is working just fine (Camera, NFC, 5G)
POCO fix:
First of all, you have to enable USB debugging and installing apps via usb. Because the launcher is "blinking", you will have to get to developer options via quick settings. It might not work, so firstly get to any application from notification or quick settings button.
Once you've done that, install magisk via adb:adb install magisk.apk
Now you have to open it: adb shell monkey -p magisk.package.name (look for it in settings) -v 1
Patch boot image with magisk as usual and flash it
Open magisk again with the same method. Or flash via PC: adb push module.zip your/desired/location; adb shell; su; magisk --install-module module.zip
Flash P2Mi.zip
Reboot and enjoy
Hi, could you please kindly provide a url link to the Chinese roms?
Thanks.
wenyendev said:
Hi, could you please kindly provide a url link to the Chinese roms?
Thanks.
Click to expand...
Click to collapse
Xiaomi Firmware Updater
The ultimate script that provides firmware packages for Xiaomi devices.
xiaomifirmwareupdater.com
btw, 4 testers have tested this method. And there were only 2 sucessful attempts, and 2 unsuccesful
Great post, i was waiting this guide for a long time!
My suggestion is 8ndonesian vendor and microg gapps. I will try asap
A question: u have tryed without flash a global vendor?
KastenTop said:
Xiaomi Firmware Updater
The ultimate script that provides firmware packages for Xiaomi devices.
xiaomifirmwareupdater.com
btw, 4 testers have tested this method. And there were only 2 sucessful attempts, and 2 unsuccesful
Click to expand...
Click to collapse
Thanks for the link.
I suppose you mean "Global phone models" by the Android devices other than Xiaomi & Redmi?
Have you tried flashing MIUI roms downloaded from the official site (https://www.miui.com/download.html) straight to Global phone models? And how was that?
wetito said:
have tryed without flash a global vendor?
Click to expand...
Click to collapse
Yep. If so, it just reboots into recovery saying that NV data is corrupted
wenyendev said:
"Global phone models"
Click to expand...
Click to collapse
The funny thing is that any other Xiaomi device just boots normally and only we are unique. And as for this phone it's got 2 versions: camellia (for china), and camellian (global)
KastenTop said:
The funny thing is that any other Xiaomi device just boots normally and only we are unique. And as for this phone it's got 2 versions: camellia (for china), and camellian (global)
Click to expand...
Click to collapse
So for the same model, for example, Redmi Note 10, Xiaomi developed a version (named "camellia") to sell in mainland China, and another (named "Camellian") for oversea market?
wenyendev said:
So for the same model, for example, Redmi Note 10, Xiaomi developed a version (named "camellia") to sell in mainland China, and another (named "Camellian") for oversea market?
Click to expand...
Click to collapse
Yes
KastenTop said:
Yes
Click to expand...
Click to collapse
Ok, I see.
So am I right in saying that Chinese roms (on the official website listed here https://www.miui.com/download.html) customized for domestic model (ex. Camellia) cannot be installed on Global model (ex. Camellian)?
wenyendev said:
Ok, I see.
So am I right in sayting that Chinese roms (on the official website listed here https://www.miui.com/download.html) customized for domestic model (ex. Camellia) cannot be installed on Global model (ex. Camellian)?
Click to expand...
Click to collapse
Yes. And it looks like the reason is vendor partition. I can't tell exactly what makes it crash with Chinese vendor
KastenTop said:
Yes. And it looks like the reason is vendor partition. I can't tell exactly what makes it crash with Chinese vendor
Click to expand...
Click to collapse
I understand now.
Why not simply install a Global miui for Camellian (https://new.c.mi.com/global/miuidownload/detail/device/1900390), rather than use a Chinese Rom customized for Camellia on Camellian?
wenyendev said:
I understand now.
Why not simply install a Global miui for Camellian (https://new.c.mi.com/global/miuidownload/detail/device/1900390), rather than use a Chinese Rom customized for Camellia on Camellian?
Click to expand...
Click to collapse
More beautiful and faster
KastenTop said:
More beautiful and faster
Click to expand...
Click to collapse
Ok. Btw, how do you get to know if the version of Redmi Note 10 is Camellia or Camellian?
wenyendev said:
Ok. Btw, how do you get to know if the version of Redmi Note 10 is Camellia or Camellian?
Click to expand...
Click to collapse
Build prop
i could flash both latest MIUI 13 dev (13.0.3.1.13) and stable (V13.0.8.0.SKSCNXM) without doing anything from your thread
cams and nfc (didnt try 5G since i dont have coverage) work well
im not sure if for older MIUI versions you can just flash it without requiring any steps from the post
(dev miui, always uses blue miui logo)
so i suppose flashing system.img china over could work?
1lopes said:
i could flash both latest MIUI 13 dev (13.0.3.1.13) and stable (V13.0.8.0.SKSCNXM) without doing anything from your thread
cams and nfc (didnt try 5G since i dont have coverage) work well
im not sure if for older MIUI versions you can just flash it without requiring any steps from the postView attachment 5787399
(dev miui, always uses blue miui logo)
Click to expand...
Click to collapse
thanks for your feedback. i was quite sure that miui cn version can be installed without any bootloop, and you have confirmed
wetito said:
so i suppose flashing system.img china over could work?
thanks for your feedback. i was quite sure that miui cn version can be installed without any bootloop, and you have confirmed
Click to expand...
Click to collapse
I actually just flashed it via mi flash both versions just fine
1lopes said:
I actually just flashed it via mi flash both versions just fine
Click to expand...
Click to collapse
Are you sure you got camlliaN, and not just camellia?
It's really interesting topic. In my case if I do not flash vendor I get rebooted into Recovery saying NVData is corrupted. For the other guy it didn't even boot, throws to fastboot
KastenTop said:
Are you sure you got camlliaN, and not just camellia?
Click to expand...
Click to collapse
It is camellian, I bought it fresh new, if u want to see I can send some images (but if im sure MIUI CN changes the model to Chinese but im not sure about the hardware)
k20 pro, flash global rom : 12.0.1 stable global firmware
now it have 12.0.6.0 QFKMIXM update in settings, can i ota update ?
Cuz i feel like my current firmware won't let me connect public wifi that required open
connect.rom.miui.com/generate_204
giffmetangoplz said:
k20 pro, flash global rom : 12.0.1 stable global firmware
now it have 12.0.6.0 QFKMIXM update in settings, can i ota update ?
Cuz i feel like my current firmware won't let me connect public wifi that required open
connect.rom.miui.com/generate_204
Click to expand...
Click to collapse
Weird, the update dates from 2020-06-22 and is in A10, the V12.0.6.0.QFKMIXM also while there is the V12.5.2.0.RFKMIXM which is in A11 (2021-08-13 ).
https://xiaomifirmwareupdater.com/archive/miui/raphael/
You can download the rom offer with a pc then put it on the phone and update via update, 3 points at the top right select the update file and so on to arrive at the last.
If the bootloader is unlocked use Miflash or TWRP it will go faster.
https://forum.xda-developers.com/t/flash-tool-guide-use-xiaomi-flash-tool.4262425/
but isnt it will delete all userdata ? like installed apps, etc...
i tried many way to fix that 204, with adb command shared in this forum, even after successful executed, still 204
my phone is unlocked bootlader/rooted
giffmetangoplz said:
but isnt it will delete all userdata ? like installed apps, etc...
i tried many way to fix that 204, with adb command shared in this forum, even after successful executed, still 204
my phone is unlocked bootlader/rooted
Click to expand...
Click to collapse
yea ,Miflash erase the data.
Try to change DNS.
https://forum.xda-developers.com/t/flash-tool-guide-use-xiaomi-flash-tool.4262425/