no i think i its time to help a bit because of
some people have issues with the cm recovery on cm12.1 roms
cm rec is not really good
some people want to use (flash) xposed or so
so here is my file (moded kernel ) for cm12.1 (also works on cr droid 02.08)
credits to
sony for the device z3tab comp lte because its the best 8inch tab
nut for the kernel repack and his xzdrec
cyanogen inc for the 06.08 nightly and the boot img
and the dev of ndr utills
Instrucktions
if you are on stock rom
1. flash cm or cr droid from dual recovery
2. flash gaaps
3.flash sgp621 kernel from attachments
4.boot to sytem
5. test to boot from system to recovery if it works all fine
6. if you see in step 5 the cm recovery boot device to fastboot
and unpack the twrp zip from attach and seleckt fastboot on flashtool then hotboot kernel or flash kernel select the twrp img and flash it now in twrp flash the attached cm kernel and reboot.
Anyone tried this yet?
[OFFICIAL] TWRP 2.8.7.0 [Materialized Theme] - Xiaomi Redmi Note 4G DIOR (Single Sim)
NOTE: This is for the QCOM variant of the Redmi Note, otherwise known as Redmi Note 4G, and NOT the MTK variant of the Redmi Note. In short, this ROM will NOT work on the MTK variant of Redmi Note 4G
NOTE: We are looking for active developers and testers to help our team (Team Revior) who are already working on the CyanogenMod 12. If you want to help, please knock us.
You can follow our Google+ Community for new updates on our latest developments of Cyanogenmod 12 and other ROMS:
https://plus.google.com/communities/109685043900289167281
Special Credits
@haoyangw
(I had no idea about making ROMs and Wang constantly helped me with fixing the errors I faced. Without his trees and help, this wouldn’t be possible. )
Credits
Team Revior
@suhasgta
Shubham
@stane1983
@Silesh.Nair
@sm_94
Syhost
CyanogenMod
XDA
Downloads
https://drive.google.com/folderview?id=0B3ezpQ7wyZXlcU9fRFZ0R3g4ems&usp=sharing (select TWRP Custom Recovery Folder)
http://bigota.d.miui.com/tools/MiPhone2015731.exe (download to install fastboot and adb drivers)
Sources
https://github.com/faheemkamal/OMNI_TWRP_android_device_xiaomi_dior
Installation
1. With fastboot:
Extract recovery.img from the zip file
Run fastboot
Enter the following command "fastboot flash recovery recovery.img"
2.With MiRecovery using flashable zip:
Copy the zip file in root of internal storage
Rename it to update.zip.
Enter into recovery (volume up + power)
Install update.zip from SDcard.
Reboot.
3. With CWM or TWRP using flashable zip:
Copy the zip file in root of external sd card
Enter into recovery (volume up + power)
Install zip from SDcard.
Reboot.
The link to my CM12.1 for DIOR can be found in this link : http://forum.xda-developers.com/redmi-note/orig-development/cm12-1-redmi-note-4g-single-sim-t3197441
reserved
reserved
reserved
You finally did it bro! Congratulations! Everything works!
shubhamkarande said:
You finally did it bro! Congratulations! Everything works!
Click to expand...
Click to collapse
hehehe yeah. thanks bro
daviduco said:
It gets stuck every time i choose REBOOT SYSTEM. I have to hard reset the phone.
It happened the first 2 times, now it works, :S
Nope, definitely there's something wrong with this recovery, it gets stuck from time to time and i have o hard reset to exit.
Click to expand...
Click to collapse
Yeah. It's actually a bug on the twrp itself. The developer maybe missed that.
This stable version or not?
Can you release a dark version??
TheAqib
Send from my RedMi Note4G
reboot problem
Is there a problem with rebooting from recovery? Almost never am I ever able to reboot to system from recovery. It just freezes if I click reboot to system. At first, I thought I flashed wrong and there is no OS in the phone, but later I just switched it off and switched it on again, and it worked just fine. Also, later I just went to recovery and selected reboot to system and it froze.
droid_cyborg said:
Is there a problem with rebooting from recovery? Almost never am I ever able to reboot to system from recovery. It just freezes if I click reboot to system. At first, I thought I flashed wrong and there is no OS in the phone, but later I just switched it off and switched it on again, and it worked just fine. Also, later I just went to recovery and selected reboot to system and it froze.
Click to expand...
Click to collapse
same with me , now my device is stucked on recovery its not booting, even after fulll wipe and after flashing miui rom.
someone plz help me out
Here is a new bugless stable TWRP recovery v3.0.1.0 for A104 .....
FEATURES:
- All functions Working properly.
- New UI
- Mass Storage Mode Working (MTP removed by TWRP Team)
- Now u can backup Boot Logo, Protect fs, Recovery, etc ...
- Now u can cancel backups in progress.
Instructions:
- Download recovery.img and flash via rasher or flashify or Mobile Uncle tools.
Downloads:
recovery.img
Credits:
-TWRP Team
- @ yuweng for his great MTK Work.
- Sai Charan
Great Work @saginesht bro!! Keep it up.
saginesht said:
Here is a new bugless stable TWRP recovery v2.8.7.0 for A104 ..... Ported from Gionee M2.
FEATURES:
- All functions Working properly.
- Materialised Theme inbuild ( remove ui.zip from /TWRP/theme if u have used theme in previous twrp)
- MTP , Mass Storage Mode Working ( If MTP doesnt work .. Disable and enable again)
- Now u can cancel backups in progress.
Instructions:
- Download recovery.img and flash via rasher or flashify or Mobile Uncle tools.
Downloads:
recovery.img
Credits:
-TWRP Team
- @ yuweng for his great MTK Work.
- ARGN Devs
Click to expand...
Click to collapse
Thanks for providing...
Awesome Work Bro
Thanks For Credits
Touch doesn't work good in twrp. Any fixes ?
Sent from my Moto E using Tapatalk
Can I flash this recovery by fastboot commands?
sent from moto g2014 with cm13
Always coming default recovery mod
I have done all the ways to install custom recovery , but always i go to recovery mod it is always remains default one....please help
Aishworyann said:
I have done all the ways to install custom recovery , but always i go to recovery mod it is always remains default one....please help
Click to expand...
Click to collapse
Well you can get the custom recovery TWRP 3.0.1,0 for Micromax and flash it using rashr it will surely work.
My personal experience
twrp some touch dosent work so reupload clockwork mod recovery (dev-host)
Any new version available ?
There is confusion over which recoveries to install for Redmi 6 (cereus).
Failure to install the correct TWRP will result in a hard brick with no chance of restoring the device without an authorised account or going to a Mi Service Centre.
If you are currently on the MIUI Oreo ROM:
You may ONLY use TWRP 3.3.0 OR 3.2.3-0 OR 3.2.3-1
The recovery by either TWRP or LR.Team is both ok.
If you are on the PIE rom:
You MUST use TWRP 3.3.1 or OrangeFox Recovery. R10.0-2 nocrypt Pie is confirmed to be working by me.
To root MIUI pie, follow the instructions in this post from 4PDA. This is because you will be unable to decrypt data.
You need to create an account to download the patched boot.img. You can either create one yourself or ask me or someone else to PM you with the boot.img. I will not attach it to this thread because it is not my work. The files have now been attached. See post below.
All credits go towards the respective recovery authors and 4pda
OK here are the boot files from 4pda
You MUST follow the instructions from this guide: http://4pda.ru/forum/index.php?showtopic=907017&st=5020#entry87853533
All files obtained from 4pda.ru - from a post by MCMXCII
Full credits go towards the authors of the respective .imgs
I did something wrong just don't know what
I tried with OrangeFox and when rebooted in recovery the phone would not turn on and just vibrates.
I was lucky because I just needed to open and remove the battery to get the phone back up.
So just to get it right (please correct me if i'm wrong):
Starting from unlocked MIUI stock with android 8.1 base:
0) Download patched boot image from OP
1)Download TWRP 3.3.0 OR 3.2.3-0 OR 3.2.3-1
2)Download Magisk 19.3 Stable (would the latest stable also work https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445?)
3)Download official Pie Rom: http://bigota.d.miui.com/V10.4.4.0.PCGMIXM/miui_HM6Global_V10.4.4.0.PCGMIXM_99304098f7_9.0.zip
4)Enter Fastboot -> Flash TWRP
5)Enter TWRP -> Flash the Pie Rom -> Flash patched boot.img -> flash Magisk
6)Boot into system -> Leave the device alone for 2-3 minutes and install Magisk Manager
7)Download -> TWRP 3.3.1 or OrangeFox Recovery. R10.0-2
8)Enter Fastboot -> Flash TWRP/OrangeFox
would this be the correct procedure?
cheers
snoerme said:
So just to get it right (please correct me if i'm wrong):
Starting from unlocked MIUI stock with android 8.1 base:
1)Download TWRP 3.3.0 OR 3.2.3-0 OR 3.2.3-1
2)Download Magisk 19.3 Stable (would the latest stable also work https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445?)
3)Download official Pie Rom: http://bigota.d.miui.com/V10.4.4.0.PCGMIXM/miui_HM6Global_V10.4.4.0.PCGMIXM_99304098f7_9.0.zip
4)Enter Fastboot -> Flash TWRP
5)Enter TWRP -> Flash the Pie Rom -> flash Magisk
6)Boot into system -> Leave the device alone for 2-3 minutes and install Magisk Manager
7)Download -> TWRP 3.3.1 or OrangeFox Recovery. R10.0-2
8)Enter Fastboot -> Flash TWRP/OrangeFox
cheers
Click to expand...
Click to collapse
?????????????????????
Why don't you skip steps 1-3 and just use XiaoMi Flash to install 10.4.4.0 via Fastboot by 'saving user data', then follow the instructions here? XiaoMiFlash will overwrite your recovery with the default so there is no risk of a brick. Then Flash TWRP Pie, flash boot img, flash magisk.
As I have said, you will brick your device. If you have TWRP Oreo, and then you install MIUI Pie, you will brick your device. You are doing EXACTLY what I told you not to do!
It didn't come out as clearly as you think. maybe it's my own deficiency.
btw whenever i flashed any update via TWRP the recovery got replaced by stock recovery as well.
(I don't tell this to call into question that your suggested way of doing was the most safe way.)
Is XiaoMi Flash available for linux as well?
edit: do you know if the latest magisk stable 20.0 would also work?
snoerme said:
It didn't come out as clearly as you think. maybe it's my own deficiency.
btw whenever i flashed any update via TWRP the recovery got replaced by stock recovery as well.
(I don't tell this to call into question that your suggested way of doing was the most safe way.)
Is XiaoMi Flash available for linux as well?
Click to expand...
Click to collapse
I'm not sure - I have never flashed any MIUI ROM in TWRP. It seems normal though - the updaterscript probably tells TWRP to overwrite itself.
https://forum.xda-developers.com/android/software/tool-miflash-linux-t3708847 It's a bit complicated
This work for me :
1 - Install Pie Rom https://bigota.d.miui.com/V10.4.4.0.PCGMIXM/miui_HM6Global_V10.4.4.0.PCGMIXM_99304098f7_9.0.zip with TWRP 3.3.1 https://mifirm.net/downloadtwrp/62 or with another method.
2 - Shut down the phone , go to fastboot (Vol - and power), plug to computer.
3 - From the computer fastboot flash boot boot_10.4.4.0_R6_mgsk_193.img (see the second post of this thread).
4 - fastboot flash recovery recovery-TWRP-3.3.1-0602-REDMI6-CN-wzsx150.img
5 - Recovery (Vol+ and power)
6 - Install Magisk 19.3
Reboot and enjoy
Hi, currently I'm on stable China mui v10.4.3.0. Do you have boot.img on that v10.4.3.0. Currently link only provide boot.img for v10.4.2.0 for the china version. If no how do I get those, can I just backup them from twrp, Then create patched boot img with those backup boot? Thanks
Che0063 said:
OK here are the boot files from 4pda
You MUST follow the instructions from this guide: http://4pda.ru/forum/index.php?showtopic=907017&st=5020#entry87853533
All files obtained from 4pda.ru - from a post by MCMXCII
Full credits go towards the authors of the respective .imgs
Click to expand...
Click to collapse
Thanx for boot_10.4.4.0_R6_mgsk_193.img :good:
ribou said:
This work for me :
1 - Install Pie Rom https://bigota.d.miui.com/V10.4.4.0.PCGMIXM/miui_HM6Global_V10.4.4.0.PCGMIXM_99304098f7_9.0.zip with TWRP 3.3.1 https://mifirm.net/downloadtwrp/62 or with another method.
2 - Shut down the phone , go to fastboot (Vol - and power), plug to computer.
3 - From the computer fastboot flash boot boot_10.4.4.0_R6_mgsk_193.img (see the second post of this thread).
4 - fastboot flash recovery recovery-TWRP-3.3.1-0602-REDMI6-CN-wzsx150.img
5 - Recovery (Vol+ and power)
6 - Install Magisk 19.3
Reboot an denjoy
Click to expand...
Click to collapse
ThanX ! ! !
This work for me :good:
EDIT:
The flashlight and the camera does not work after flash the boot boot_10.4.4.0_R6_mgsk_193.img [emoji848]
Does anyone else have a similar problem?
View attachment 4862683
I have the camera and flashlight problem too. Any fix?
Unfortunately, I didn't find any solution.
Currently, my phone does not start, has a black screen and vibrates all the time. I can't run it in any way
EDIT:
Hi.
I was able to bring the phone to life. Get instructions on how to get to the battery https://www.youtube.com/watch?v=L9FH88b16bc https://www.youtube.com/watch?v=fAflA4UKLLY. In orangeFox recovery I checked the flashlight, it works.
That makes us two. My phone is unusable at the moment. I thought the root was responsible for the camera bugs, I uninstalled magisk, the bug was still there. I tried to reinstall MIUI 10.4.4 ang got an error. I've wiped everything including vendor and system.
I clean dalvik and cache and for now the phone is working even, after flash the patch boot.img
ribou said:
This work for me :
1 - Install Pie Rom https://bigota.d.miui.com/V10.4.4.0.PCGMIXM/miui_HM6Global_V10.4.4.0.PCGMIXM_99304098f7_9.0.zip with TWRP 3.3.1 https://mifirm.net/downloadtwrp/62 or with another method.
2 - Shut down the phone , go to fastboot (Vol - and power), plug to computer.
3 - From the computer fastboot flash boot boot_10.4.4.0_R6_mgsk_193.img (see the second post of this thread).
4 - fastboot flash recovery recovery-TWRP-3.3.1-0602-REDMI6-CN-wzsx150.img
5 - Recovery (Vol+ and power)
6 - Install Magisk 19.3
Reboot an denjoy
Click to expand...
Click to collapse
Hello this is the steps i did but when rebooting to recovery i end up on blackcreen or mai i say powered off screen with the device unable to boot to recovery,any ideas what i did wrongly?
It seems there is something wrong with that boot patch. I followed a procedure on youtube and my phone is succesfully rooted without any bug
@ambyy
what guide did you use on YouTube?
Wysłane z mojego Redmi 6 przy użyciu Tapatalka
https://www.youtube.com/watch?v=I_4Zmco9R78&t=25s
Hard brick caused by flashing wrong TWRP is indeed able to get solved with unplugging the battery.
Miui v11 boot.img please
model:A6+(SM-A605F)
After installing the gsi rom from twrp, boot into the system and it will boot into download mode.
If it boots to download mode then you downloaded wrong GSI image (for wrong architecture - it needs to be arm32_binder64) or just something went wrong during flashing in custom recovery.