Question Battery Charging problem after recent update - OPPO Find X3 Pro

I recently updated my phone to CPH2173_11_C.48 (April 2022 Security).
When the phone is on the fast charging shows but the battery % does not increase, in fact the battery drains when used.
The only way I can get it to charge is by first connecting the charger and then turning off the phone. After it starts charging (and the charging % increases), I can then turn the phone on and it charges properly even whilst using the phone to watch videos.
The only thing I have done recently is to update to the latest firmware.
Any ideas what the issue may be?

If you do the above process then unplug and plug straight back in, does the problem replicate?
Does it only happen below or above a certain battery%?

It happens on low and high battery %. If I unplug and then plug straight back the problem replicates

Noticed something a bit weird, I connected the phone to my PC and it is charging slowly (normal charge, not fast charge). When plugged into an outlet, it shows fast charging but the % does not go up (unless the phone is off).
Could this be a software issue with fast charging? Any way to fix other than to try factory reset?

Guest69 said:
If you do the above process then unplug and plug straight back in, does the problem replicate?
Does it only happen below or above a certain battery%?
Click to expand...
Click to collapse
The culprit looks to be fast charge at lower battery %. I can slow charge at lower battery with the phone on and fast charge at higher % ( around70% +). Whilst off, fast charge works at any % battery.
Could this be software or hardware issue. Problem persists even after factory reset.

Related

X1 charging issue

This problem just started last night and I can't figure out what's the cause of it. After a few hours into charging, the phone just turns itself on and charging stops!
I'm running stock rom with a few performance tweaks. I'm not sure whether this's software or hardware related and if a hard reset would fix anything.
Cheers.
Are you charging using a PC or directly from adapter?
if from PC, click on the battery icon when the device is on and make sure that "When device is turned on, do not charge the battery when connected to the PC." is unchecked
I use the adapter to charge, I did try to untick the option afterwards and now just osberving if it does it again.
May be this's another bug when it's supposedly only applicable when charged from USB.
Charging issue and low battery life
Hi, I have had my X1 for 4 days now and overall I am very happy with the features, and I have obtained a lot of very useful tips from the XDA forum, thanks. However I am experiencing problems charging the phone and also not happy with the battery life. Last night I left the phone plugged into the USB of the pc that I installed activesync on (pc was, of course, also on) I switched the phone off and ensured that the charging light indicators were flashing. This morning the charging indicators were off but the phone was only partially charged. I then plugged the usb cable into the mains charger and the phone charged to full in 1.5 hours. Does this mean that charging via the pc is inefficient? During the day I made no calls and sent 2 texts, I did have messenger and skype running although I put the phone into sleep mode. Its now about 8pm and the battery has died. I have plugged the usb into my laptop (which does not have the activesync software on it) the charging lights are flashing but I dont think that the phone is charging as the battery is draining. I read on this forum that you must have activesync installed on the pc that you want to charge the phone on, but why is this. Whats the point of that, the whole point of being able to charge via usb is that you can top up anytime you are near a pc, and looking at the battery life I assume I will need to top up a lot. Can I have your thoughts please.
i have been in the same position.
it's probably because your laptop / pc is in hibernate mode / power saving mode..hence it doesnt charge.
try disabling it and see how it goes
Thanks for the prompt reply Berlinberlin
Hi I can confirm that my PC is set to turn off monitor after 20mins and to never turn off Hard Disks and never go into standby and never hibernate. So I don't think that this is the problem but thanks for your thoughts
How long does/should it take to fully charge the phone via usb? How long does it take yours to charge? Since I wrote the post above I have had my phone plugged into my laptop but with the phone swithed off, the charging indicators lights are pulsating. I have now turned the phone on and the battery is 40% charged from being nearly totally depleted (about one hour of charging) . I do not have Activesync on this pc, so the phone will charge on any PC, I assume.
hello.
once i had one x1 charged via usb over night (with a pc with active sync)
the battery depleted the next morning and it doesnt turn on again
so maybe it's better to quit active sync before charging?
toucam said:
This problem just started last night and I can't figure out what's the cause of it. After a few hours into charging, the phone just turns itself on and charging stops!
I'm running stock rom with a few performance tweaks. I'm not sure whether this's software or hardware related and if a hard reset would fix anything.
Cheers.
Click to expand...
Click to collapse
The charging problem I've observed has a different effect:
when on charge using the adaptor, the battery charges OK to full and then charging ceases (as it should do)
BUT
if the X1i is connected to WiFi on my LAN, after a time (maybe 30 mins), it commences to recharge and never stops, so the battery can become dangerously overheated.
Disconnecting from WiFi and soft-reset seems to bring the system back to normal.
At this stage I don't know the root cause, but I have a new battery on order. When this turns up, I'll try the same routine and post results. Obviously, I suspect (hope, too) that the "smarts" in the battery are faulty.
x1 charging problem
I' have the same problem with my x1 charging.
The phone after i started charging, turn on and stop the charging.
In the mornig the battery is low.
Is there any solution that fix the problem?
ianl8888 said:
The charging problem I've observed has a different effect:
when on charge using the adaptor, the battery charges OK to full and then charging ceases (as it should do)
BUT
if the X1i is connected to WiFi on my LAN, after a time (maybe 30 mins), it commences to recharge and never stops, so the battery can become dangerously overheated.
Disconnecting from WiFi and soft-reset seems to bring the system back to normal.
At this stage I don't know the root cause, but I have a new battery on order. When this turns up, I'll try the same routine and post results. Obviously, I suspect (hope, too) that the "smarts" in the battery are faulty.
Click to expand...
Click to collapse
In your case I tend to think the problem is with Wi-Fi using more battery than what it's gaining through charging. I had similar problem with a generic mini-USB charger. Most charging problems are associated with either battery or charger itself.
Even i had a same issue,
But i luckily remembered the setting which i had changed,
Try this,
Setting`s->System-> Power-> Advanced Tab
{code}
Make sure u have selected this option and set it to minimum value,
"Turn off device if not used for"
{code}
Hope this solves issue

[Q] My battery won't charge once it's reached 100% it drops (even while plugged in)

So I plug my phone in -- it charges to 100%
This usually occurs over night, however it occurs during the day when i charge it at work too.
AS SOON as I pull the plug out -- it drops from 100% to like 80% or 70% instantly.
In other words, it can charge to 100%, but it can't hold that charge, even while plugged in -- even while plugged in it will lose it's battery.
I have to quickly unplug it then plug it back in and let it charge up to 100% again (at which point it starts to drop, again)
Questions
1) why does this happen ? Is my battery done ?
2) how to fix this ?
You need to calibrate it probably, search for galaxy battery calibration
Or, you are having the Gingerbread bug if you are on 2.3... (See General sub-forum, there's the answer)
1) Because Lithium batteries can not be trickle charged without setting fire to your desk. Once the charging is done it stops charging till it reaches a certain level determined by the system. That is usually somewhere between 90-100%. Dropping to 70-80% seems like more of a software glitch than anything else.
Also don't unplug and plug it in again. This may be bad for your battery.
Also2 if you're plugged into the computer it seems as though the computer can't provide enough power from it's socket to run the phone with the screen on and in active use. Does it still do it on the wall charger?
had same problem
proper caliberation will work :]

[Solved] Upgraded to CM7 RC14 (doshaska), now battery will not charge on my Milestone

Edit: thanks to this post, my problem has been solved. Thanks!
So last night I went from stock motorola 2.2 to this wonderful-seeming version of CyanogenMod on my UK milestone - the install went flawlessly, but now I have a problem - my battery is not charging at ALL.
While the phone was on last night after I charged it, it was plugged in, first to my PC and then to the wall socket. In both cases, the battery indicator had a ? (question mark) on it.
I thought it might have been some weirdness with battery calibration so I left it and plugged the phone in from the wall to charge overnight. This morning, my phone was telling me to connect my charger (despite it being plugged in) and on removing the power cable, it died due to no battery power left within 10 minutes.
While plugged in from the wall, the battery indicator comes up but again just contains a ? on it. The little white light next to the power socket never lights up.
If I plug the phone in to my PC via USB then if the handset is OFF, the white light comes on and around 10 mins later it gets enough juice to boot up. The problem is that when the CM7 software starts, the little white light disappears, the phone stops charging despite the cable being present, and it then dies 2 minutes later.
I know the battery is fine because it was perfectly fine before I installed CM7.
Anyone else experienced this problem and/or know how to fix it?
One thing I did manage to do before it died was install a battery calibration app that I found on xda-developers - this told me that the battery was running at 3267 mV - any idea if that's good or bad?
(and yes, I'm using precisely the same cable/charger I was using before I put this version of CM7 on, so I know they are fine - they charge a friend's SGS with no problems)
thatbloke83 said:
So last night I went from stock motorola 2.2 to this wonderful-seeming version of CyanogenMod on my UK milestone - the install went flawlessly, but now I have a problem - my battery is not charging at ALL.
While the phone was on last night after I charged it, it was plugged in, first to my PC and then to the wall socket. In both cases, the battery indicator had a ? (question mark) on it.
I thought it might have been some weirdness with battery calibration so I left it and plugged the phone in from the wall to charge overnight. This morning, my phone was telling me to connect my charger (despite it being plugged in) and on removing the power cable, it died due to no battery power left within 10 minutes.
While plugged in from the wall, the battery indicator comes up but again just contains a ? on it. The little white light next to the power socket never lights up.
If I plug the phone in to my PC via USB then if the handset is OFF, the white light comes on and around 10 mins later it gets enough juice to boot up. The problem is that when the CM7 software starts, the little white light disappears, the phone stops charging despite the cable being present, and it then dies 2 minutes later.
I know the battery is fine because it was perfectly fine before I installed CM7.
Anyone else experienced this problem and/or know how to fix it?
One thing I did manage to do before it died was install a battery calibration app that I found on xda-developers - this told me that the battery was running at 3267 mV - any idea if that's good or bad?
(and yes, I'm using precisely the same cable/charger I was using before I put this version of CM7 on, so I know they are fine - they charge a friend's SGS with no problems)
Click to expand...
Click to collapse
Try plugging the phone into the wall charger, without the battery. Try and boot it up and let it boot. Once it's booted up, give it a bit and try and put the battery in and leave it to charge.
What happens if you turn off you phone and plug it in a wall charger? If the problem isn't in your battery it will charge fully.
When you phone comes up, try to disable the 1% battery steps in settings. I got a problem with it, and after disabled/enabled it worked fine for me.
Hope this helps.
On plugging it into a wall charger, the phone comes up with its special battery charging screen (i.e. a fullscreen battery level indicator) - no amount of pressing the power button seems to get it to boot properly (with or without the battery).
I'll see if I can get in and get rid of the 1% steps thing later, thanks for the suggestion
afonsolage said:
What happens if you turn off you phone and plug it in a wall charger? If the problem isn't in your battery it will charge fully.
When you phone comes up, try to disable the 1% battery steps in settings. I got a problem with it, and after disabled/enabled it worked fine for me.
Hope this helps.
Click to expand...
Click to collapse
Dude, that was PERFECT.
Managed to get enough juice into the thing to get into the menu for a moment and was able to disable the 1% battery steps option - soon as I touch that tickbox, the battery indicator switches from a ? to the charging symbol and the phone starts charging. Thanks a million!
Nop dude, you are welcome

Battery problem HD7

Hello everyone ....
I have a problem with charging the battery on my HD7...
When I leave the phone on the charger overnight ... the morning shines green light 100% battery, but after a few minutes show a lower value ... eg 90%. During the day, the battery drain is normal.
When the phone on the charger during the day and when the battery is charged (quickly turns off the charger) ... there is no effect of the rapid discharge of the battery. The battery is drained properly.
I concluded that the charger charges the battery to 100%, and then turns off. The phone starts to use battery the rest of the night. The phone is still on the charger. I think that is not normal behavior of the phone. My Trophy has not worked in this way
I use Nextgen 2.0 rom. and battery status v4.1.0
I wonder, the battery is bad or the software or something else.
thank you
--------------------- edit -----------------------------------
I solved the problem by buying a new charger
Anybody can help him
tula... said:
Anybody can help him
Click to expand...
Click to collapse
No need, look at the bottom of his post - he fixed the problem with a new charger.
I had similar problem, changed to new one.
when u leave the phone on the charger overnight, what happens is that th ephone fully charges. to 100 % and then the charger shuts off. but the phone runs on fthe battery especially if u have the radios or wifi on but the indicator thinks that its still on the charger ...but the wifi radios ect is using the power
when u unplug the phone, the battery drains down to actual level aka rapid draining
I think battery or charger should be the problem but probably battery. pretty cheap on ebay

P9 won't charge after battery replacemnet

So like the title said i have replaced the battery in my P9, with an original battery. It has the same part number and all that. I have noticed that the phone won't charge the replacement battery, i have returned the new battery in warranty and revived another one. Same thing, the phone starts up as soon as you plug in any kind of power source to it , like a charger, but no charging notification. The notification light pulses in rare intervals (some thing of 10 secs or more) but it's not steadily on like when normally charging. And the most vexing thing is : if i replace the original battery it charges. Unfortunately the the original battery now has the bad habit of cutting out on me at random from anywhere 47% or bellow .... The phone is nearly 3 year old now.
Have you given the new batteries some time to charge? Maybe they were delivered to you fully discharged.
First one was on 85% the second on 60% or so. I kept the 1st one on charger for a whole weekend... Still nothing
Have you tried to callibrate the original battery (you say it suddenly drops if below 40%)?
Yes, I have allowed the battery to run down to 3% and the phone turning itself off. Then fully charged it while being off. So the original battery is just plain old, nearly 3y old. The problem is that the phone refuses to charge the new batteries regardless of original charge. Also it turns automatically on when you plug in a charger, not just showing the charge animation. That is not normal behavior.
olaf2k4 said:
Recalibrate how?
Click to expand...
Click to collapse
Did you try to search?!
There is a thread on battery calibration (XDA, Huawei P9, Q and A
https://forum.xda-developers.com/showpost.php?p=75592069&postcount=18
zgfg said:
Did you try to search?!
There is a thread on battery calibration (XDA, Huawei P9, Q and A
https://forum.xda-developers.com/showpost.php?p=75592069&postcount=18
Click to expand...
Click to collapse
I've done that after reading you'r message , but i have already done the steps not req root. And i'm not willing to root my phone.
P9 also not charging
Did you manage to find a resolution to this issues? I'm having the same problem with my P9. I changed my battery, and it now won't charge. It turns on ok, and everything seems to be working. When I plug in the charging cable, it makes the sound it usually does, the battery symbol flashes green but instantly turns white again. When the phone is off, plugging the cable in switches it on, but no charge. I've had two replacement batteries, both have the same issue. Also, the original battery is now doing the same. I'm wondering if I damaged something while removing the battery.
domj81 said:
Did you manage to find a resolution to this issues? I'm having the same problem with my P9. I changed my battery, and it now won't charge. It turns on ok, and everything seems to be working. When I plug in the charging cable, it makes the sound it usually does, the battery symbol flashes green but instantly turns white again. When the phone is off, plugging the cable in switches it on, but no charge. I've had two replacement batteries, both have the same issue. Also, the original battery is now doing the same. I'm wondering if I damaged something while removing the battery.
Click to expand...
Click to collapse
I think it's problem in charging IC or port.
Hi all
Had same issue with replacement battery
After replacement battery isn't charging. Problem is in bad connections
(probably from long shelf storage connectors got rusty)
Voltage was fine but temperature reading was way off (very low -2) and phone didn't charge battery
Problem is that there was no error message about battery temp.
After cleaning the contactors battery reading became normal and it started charging
Anybody ever had any solution to this problem? I have the same issue. Battery replaced - not taking any charge. If micro USB charger plugged in - the phone turns on. If it is already turned on plugging in the charger the screen flashes the % of the charge and nothing.

Categories

Resources