I rooted my Exynos S10 and I now need to flash it back to stock. What do I need to do in order to get there? It's been awhile.
kruuth said:
I rooted my Exynos S10 and I now need to flash it back to stock. What do I need to do in order to get there? It's been awhile.
Click to expand...
Click to collapse
Install Stock ROM with Odin. Download last version with Frija. Or try open Recovery Mode and in Recovery Mode make factory/reset, restart phone. After this you will lost all what you installed.
ZmisiS said:
Install Stock ROM with Odin. Download last version with Frija. Or try open Recovery Mode and in Recovery Mode make factory/reset, restart phone. After this you will lost all what you installed.
Click to expand...
Click to collapse
OK I DL'd the stock ROM, it's in that weird enc4. Do I just unzip that and install it with ODIN?
kruuth said:
OK I DL'd the stock ROM, it's in that weird enc4. Do I just unzip that and install it with ODIN?
Click to expand...
Click to collapse
Yes, unzip and install with ODIN. AP, BL, CP and CSC.
Ok well new problem. I can't seem to get it to recognize the phone on my computer when I plug in the USB cable. It charges though. WTF?
Did you install the latest driver? Try change USB socket. Open ODIN as Administrator.
Related
My note wont turn on, it does however go into DL mode... I don't know whats going on here since i got it like that. Anything I should put on the sd card or any advise?
you got the phone in that state ??
I would suggest flashing GB firmware in ODIN and starting from a fresh install.
azzledazzle said:
you got the phone in that state ??
I would suggest flashing GB firmware in ODIN and starting from a fresh install.
Click to expand...
Click to collapse
How exactly do I do that? I've had Android for years but never done technical stuff like that
You need to download the GB ROM from http://forum.xda-developers.com/showthread.php?t=1424997 and flash it using PC ODIN
Nice guide by Dr Ketan there to download, flash and root stock roms.
Apurva
manny315 said:
How exactly do I do that? I've had Android for years but never done technical stuff like that
Click to expand...
Click to collapse
Ok, Go here: http://forum.xda-developers.com/showthread.php?t=1424997
Download the GB firmware for your region, Also download ODIN (should be on that thread too)
Once downloaded, Load all the files into ODIN and connect phone in Download mode and hit start
You'll be up and running in no time at all
Hi guys,
So this morning I found that an AOSP-based Android 5.0 ROM was available for my S3 mini. I knew that this ROM would have several issues (no camera, GPS, 3G etc.) but I really didn't expect to get into the situation that I'm currently in...
Probably because of compatibility reasons, I can no longer access my recovery (TWRP v2.7.10). This means that I'd need to use Odin to flash a new ROM. However, when I connect my phone to the PC, it doesn't show up in Windows Explorer, and I get a message saying that the device malfunctioned, and that I should try reconnecting it (which, of course, I tried about 173 times).
So it seems that it is now impossible for me to install a new ROM.
Would any of you guys have the faintest idea of what I can do now?
Thanks
Extra Info: My phone's WiFi works, but since I don't have Gapps installed, I've only got the stock browser, which crashes about 3 seconds after I open it, so accessing the internet on my phone is practically impossible. I also don't have any file explorer installed, since I'm on completely stock Android and don't have Play Store access.
androidkitty4427 said:
Hi guys,
So this morning I found that an AOSP-based Android 5.0 ROM was available for my S3 mini. I knew that this ROM would have several issues (no camera, GPS, 3G etc.) but I really didn't expect to get into the situation that I'm currently in...
Probably because of compatibility reasons, I can no longer access my recovery (TWRP v2.7.10). This means that I'd need to use Odin to flash a new ROM. However, when I connect my phone to the PC, it doesn't show up in Windows Explorer, and I get a message saying that the device malfunctioned, and that I should try reconnecting it (which, of course, I tried about 173 times).
So it seems that it is now impossible for me to install a new ROM.
Would any of you guys have the faintest idea of what I can do now?
Thanks
Extra Info: My phone's WiFi works, but since I don't have Gapps installed, I've only got the stock browser, which crashes about 3 seconds after I open it, so accessing the internet on my phone is practically impossible. I also don't have any file explorer installed, since I'm on completely stock Android and don't have Play Store access.
Click to expand...
Click to collapse
Turn of your phone and enter Download Mode (Power+VolumeDown+Home) and flash the Odin Version of CM11 via ODIN. When it gets to the part when it autoreboots enter recovery(Power+VolumeUp+Home). Restore your backup or do whatever you need to do.
TheScriptKitty said:
Turn of your phone and enter Download Mode (Power+VolumeDown+Home) and flash the Odin Version of CM11 via ODIN. When it gets to the part when it autoreboots enter recovery(Power+VolumeUp+Home). Restore your backup or do whatever you need to do.
Click to expand...
Click to collapse
Can't do that since my PC doesn't recognise the phone
androidkitty4427 said:
Can't do that since my PC doesn't recognise the phone
Click to expand...
Click to collapse
What do you mean? Can Odin see it when its in download mode?
TheScriptKitty said:
What do you mean? Can Odin see it when its in download mode?
Click to expand...
Click to collapse
Nope.
Update: I used a different cable, and the phone is now recognised by Odin and ADB, but still not recognised by Windows Explorer. This is a huge relief, because at least now it's possible to install new ROMs. I'd still like to get Windows to recognise it though.
You don't need Windows Explorer to flash with odin
Gesendet von meinem GT-I8190 mit Tapatalk
mkruseonline said:
You don't need Windows Explorer to flash with odin
Gesendet von meinem GT-I8190 mit Tapatalk
Click to expand...
Click to collapse
True, but you can't use Odin to install zips.
androidkitty4427 said:
True, but you can't use Odin to install zips.
Click to expand...
Click to collapse
Well if Odin recognizes install the stock rom better grab it from sammobile or flash cm from novafusion.pl site in s3 mini downloads they offer odin versión too
STRATOS99KINGZ said:
Well if Odin recognizes install the stock rom better grab it from sammobile or flash cm from novafusion.pl site in s3 mini downloads they offer odin versión too
Click to expand...
Click to collapse
So I should be fine for installing new ROMS then. What about when Gapps is released for 5.0? Will I be able to convert that to an Odin package?
androidkitty4427 said:
So I should be fine for installing new ROMS then. What about when Gapps is released for 5.0? Will I be able to convert that to an Odin package?
Click to expand...
Click to collapse
flash a custom rom via odin, after that download the NovaFusion's TWRP Recovery v2.8.0.0 20140911 from here (download odin version) and flash it via odin.
After that you can flash GApps with TWRP - very simple
moonryder said:
flash a custom rom via odin, after that download the NovaFusion's TWRP Recovery v2.8.0.0 20140911 from here (download odin version) and flash it via odin.
After that you can flash GApps with TWRP - very simple
Click to expand...
Click to collapse
Small problem: Recovery mode has been inaccessible since installing 5.0.
androidkitty4427 said:
Small problem: Recovery mode has been inaccessible since installing 5.0.
Click to expand...
Click to collapse
ok then you must go the "hard way":
Download the rom "I8190 серв. укр.rar" from here.
Unpack .rar and open Odin.
Select the goldenxx.pit to [PIT]
CODE_I8190XXAMA2_809600_REV00_user_low_ship.tar.md 5 to [PDA]
CSC_QXE_I8190QXEAMA1_20130109.163004_REV00_user_lo w_ship.tar.md5 to [CSC]
Put your phone in download-mode and connect it to computer.
Hit [Start] when device is detected by Odin.
You will end up with a "La'Fleur" branded phone, but no worries!
Just go to download mode again and flash your choice of firmware and the custom recovery as well.
The three button combo will still work!
And one tipp at last: forget lollipop until it is stable and for daily use ...
I tried to flash the stock rom via odin but it failed and now i dont have an operating system installed.. Smart switch doesnt work for ATT variants and im just here with a brick.. I can get to download but odin says removed every time..
What Odin version did you use? MUST use Odin v3.10.6
vontokkerths said:
I tried to flash the stock rom via odin but it failed and now i dont have an operating system installed.. Smart switch doesnt work for ATT variants and im just here with a brick.. I can get to download but odin says removed every time..
Click to expand...
Click to collapse
I used Odin 3.10.6 but while flashing odin told me the device got removed (still connected to the PC)
Try it again. Put each of the 4 files in its corresponding spot in odin matching each file with the spot (BL, AP, CP and CSC), put S6 in download mode, connect it to the pc via usb, press start in odin after it recognizes the phone. Use the original usb that came with the S6.
vontokkerths said:
I used Odin 3.10.6 but while flashing odin told me the device got removed (still connected to the PC)
Click to expand...
Click to collapse
I tried to flash it without the auto reboot option and it passed, im gonna see if i have software. Thanks!
If it passed you should have system installed.
vontokkerths said:
I tried to flash it without the auto reboot option and it passed, im gonna see if i have software. Thanks!
Click to expand...
Click to collapse
rooted my phone using ping pong and continued to flash TWRP. thats when it happened. I dont think usb debugging was ever enabled and I didnt know about the knox feature.
Tried using Odin but it isnt detecting the phone. I am really stuck. help please!
Do you have the proper drivers installed on your PC? Are you putting the device in Odin mode before connecting?
dandrumheller said:
Do you have the proper drivers installed on your PC? Are you putting the device in Odin mode before connecting?
Click to expand...
Click to collapse
got odin to detect now what?
Downloadiing the stock firmware...
omg209 said:
got odin to detect now what?
Downloadiing the stock firmware...
Click to expand...
Click to collapse
Download stock Odin flashable Rom and flash with Odin. Bam. Back to stock (except for your tripped Knox bit, maybe).
dandrumheller said:
Download stock Odin flashable Rom and flash with Odin. Bam. Back to stock (except for your tripped Knox bit, maybe).
Click to expand...
Click to collapse
im using odin 3.10.6 the only option i can check is AP the rest are blank, cant check the boxes.
The file i am downloading is 1.7gb am i doing this right?
EDIT: solved once odin works correctly, extract the md5 file from the zip file and choose only the AP file and start it!
giving thanks to dandrum
i am stuck in a bootloop, i cant even get to recovery. its been like this for weeks, i odin flashed stock firmware like 50 times. i have the stock firmware from sammobile, if you can help that will be great, i pretty sure i tired everything i know of. help would be nice.
re: bootloops
proman505 said:
i am stuck in a bootloop, i cant even get to recovery. its been like this for weeks, i odin flashed stock firmware like 50 times. i have the stock firmware from sammobile, all i need (i hope) is the bootloader and baseband. if you can help that will be great, i pretty sure i tired everything i know of so help would be nice.
Click to expand...
Click to collapse
Which version of the firmware did you odin flash? I have download links for
the baseband and bootloader but I do not want to post the wrong versions.
I am certain of one thing though, your problem is not related at all to the baseband or the bootloader.
If you have successfully odin flashed the proper version of the N910T firmware then you already have
the bootloader and baseband in your phone.
What you really need to do is to go into download mode and odin flash the proper version of twrp.
Then pull the battery and replace it, once it's replaced hold down the volume-up, home key and
the power button at the same time until you feel the phone vibrate, then let go of all the buttons
and the phone will go into twrp recovery.
Once you get there do a full wipe:
System,data, cache and dalvik cache and last but not least do a factory reset.
Once that's done let twrp reboot your phone and you should be good to go except
you will need to odin flash cf-autoroot if you want root access.
Good luck,
Have a great day!
Misterjunky said:
Which version of the firmware did you odin flash? I have download links for
the baseband and bootloader but I do not want to post the wrong versions.
I am certain of one thing though, your problem is not related at all to the baseband or the bootloader.
If you have successfully odin flashed the proper version of the N910T firmware then you already have
the bootloader and baseband in your phone.
What you really need to do is to go into download mode and odin flash the proper version of twrp.
Then pull the battery and replace it, once it's replaced hold down the volume-up, home key and
the power button at the same time until you feel the phone vibrate, then let go of all the buttons
and the phone will go into twrp recovery.
Once you get there do a full wipe:
System,data, cache and dalvik cache and last but not least do a factory reset.
Once that's done let twrp reboot your phone and you should be good to go except
you will need to odin flash cf-autoroot if you want root access.
Good luck,
Have a great day!
Click to expand...
Click to collapse
N910TUVU1ANK4_N910TTMB1ANK4_N910TUVU1ANK4_HOME.tar
That's the one i am flashing via odin. i opened kies restored everything i put my model # and serial # it installed the latest version of the stock firmware, i still have the same problem. my model # (on the back of the phone) SM-N910T
Okay, you don't need the bootloader or the base band.
Follow the instructions I posted for you.
Good luck!
Sent from my SM-G928T using Tapatalk
Misterjunky said:
Okay, you don't need the bootloa der or the base band.
Follow the instructions I posted for you.
Good luck!
Sent from my SM-G928T using Tapatalk
Click to expand...
Click to collapse
i did, same problem. it seems like im the only one having this problem, nothing is helping.
proman505 said:
i did, same problem. it seems like im the only one having this problem, nothing is helping.
Click to expand...
Click to collapse
Okay, then odin flash the "N910TUVU1ANK4_N910TTMB1ANK4_N910TUVU1ANK4_HOME.tar"
again, reboot the phone into download mode but before you do, remove and replace the battery.
Once in download mode go ahead and odin flash the "N910TUVU1ANK4_N910TTMB1ANK4_N910TUVU1ANK4_HOME.tar".
Then go back into download mode and odin flash the twrp recovery. (first remove and replace the battery)
Be SURE you use the proper version of twrp before you odin
flash it, the proper version for N910T is "twrp trtetmo 2.8.7.0" ...
If the above don't work for you then you must not be following
the instructions 100% to a "T" ...
Good luck!
Misterjunky said:
Okay, then odin flash the "N910TUVU1ANK4_N910TTMB1ANK4_N910TUVU1ANK4_HOME.tar"
again, reboot the phone into download mode but before you do, remove and replace the battery.
Once in download mode go ahead and odin flash the "N910TUVU1ANK4_N910TTMB1ANK4_N910TUVU1ANK4_HOME.tar".
Then go back into download mode and odin flash the twrp recovery. (first remove and replace the battery)
Be SURE you use the proper version of twrp before you odin
flash it, the proper version for N910T is "twrp trtetmo 2.8.7.0" ...
Good luck!
Click to expand...
Click to collapse
i'll try that. thanks in advance
Misterjunky said:
Okay, then odin flash the "N910TUVU1ANK4_N910TTMB1ANK4_N910TUVU1ANK4_HOME.tar"
again, reboot the phone into download mode but before you do, remove and replace the battery.
Once in download mode go ahead and odin flash the "N910TUVU1ANK4_N910TTMB1ANK4_N910TUVU1ANK4_HOME.tar".
Then go back into download mode and odin flash the twrp recovery. (first remove and replace the battery)
Be SURE you use the proper version of twrp before you odin
flash it, the proper version for N910T is "twrp trtetmo 2.8.7.0" ...
If the above don't work for you then you must not be following
the instructions 100% to a "T" ...
Good luck!
Click to expand...
Click to collapse
i did exactly what it says, same problem. odin says pass on every flash. im about to go throw this phone in the trash this is really pissing me off
Just call tmobile tell them that the phone died and get a replacement. OK, why don't you try installing an older firmware?
justice26 said:
Just call tmobile tell them that the phone died and get a replacement. OK, why don't you try installing an older firmware?
Click to expand...
Click to collapse
i did they said i voided the warranty. i guess this note 4 is gonna be my new coaster
Quick question, what firmware version were you at before this started and have you tried installing an older or newer version like LP for example?. Also verify you are downloading the correct version for your model.