Hi guys,
My pixel 5 died recently while playing a video. It will not turn on, nor make any sound. There is no haptic feedback as well when I start the device. The only time it is detected is when I boot it up in fastboot mode (Press and hold Power and Vol Down). It is detected as Pixel 5 on windows pc. It is detected under fastboot devices but I can't seem to do anything else with it. I am unable to get an adb connection. I don't remember if usb debugging was turned on or not on my device before it died, it most likely was enabled but can't get it connected via adb.
Note: The phone is bootloader locked
My question is can I recover my data from the phone through fastboot only without a working display?
Thanks.
Perhaps you could try booting into twrp and see if you can access the data that way?
Thanks. I did try that but I can't really boot into recovery as the device is bootloader locked.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
nabeeltariq said:
Thanks. I did try that but I can't really boot into recovery as the device is bootloader locked.
Click to expand...
Click to collapse
Oh no. I hope someone can prove me wrong but I believe your only option now is to send it in for a repair.
swangjang said:
Oh no. I hope someone can prove me wrong but I believe your only option now is to send it in for a repair.
Click to expand...
Click to collapse
This. Without bootloader unlock, your chances of dumping partitions are zero.
@nabeeltariq Are you able to access stock recovery? You may be able to sideload an OTA package to get working again.
Related
First sorry for my bad english, I´m new here, but I have flashed a TRWP Recovery for this device and I have rooted it, but when the device runs out off the battery, It get stuck in this...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
The device doesn´t start, don´t turn off, and when I tried to start it into the bootloader mode the adb says that it is unauthorized.
Please some help.
yulian6766 said:
First sorry for my bad english, I´m new here, but I have flashed a TRWP Recovery for this device and I have rooted it, but when the device runs out off the battery, It get stuck in this...
The device doesn´t start, don´t turn off, and when I tried to start it into the bootloader mode the adb says that it is unauthorized.
Please some help.
Click to expand...
Click to collapse
it seems you recovery its corrupted. flash it again.
charge device for a while them remove USB cable before power on. (TRWP bug)
power and vol+ for 10s to restart device.
kativiti said:
it seems you recovery its corrupted. flash it again.
charge device for a while them remove USB cable before power on. (TRWP bug)
power and vol+ for 10s to restart device.
Click to expand...
Click to collapse
It works! but you are right the recovery image were corrupted, and fix it flashing again, thanks a lot.
So recently I did a stupid and accidentally switched off my OPO during an update installation and completely screwed it all up. I tried switching it back on only to find that it was stuck in a recovery mode loop. I then hit factory reset in a last ditch attempt to save the poor bugger without flashing it and even that didn't work.
I've then had to resort to flashing it using the OPO toolkit software on my PC however when connecting to the PC, my OPO only shows up as an MTP USB Device and nothing else. I have tried installing recommended Samsung drivers for the phone but I wasn't able to as it the "update drivers" button was greyed out on the MTP USB Device properties window.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Basically, the OPO toolkit will not work as no android devices are recognised by the PC even though an android device is showing up in the control panel.
There is no way I can currently access the settings on my phone due to recovery mode loop obviously.
The last thing I want to do here is end up with being forced to use the OnePlus support which I hope most of you understand why.
Thanks for any suggestions!
Hi,
This thread is being moved to your own dedicated forum , where the experts may be able to help you better.
Good luck!
Put it in downloading mode and then use adb to use the toolkit since bow u don't have a os on the OPO happened with me too but I fixed it this way
Sent from my A0001 using Tapatalk
I just tried to install MagiskManager and I tape on "Install to Inactive Solt"
and now QUALCOMM CrashDump Mode screen show me all the time
and I cant get in recovery mode please help me!!!
Hold volume down plus power to hard reset then immediately switch to holding volume up.
After that you should be able to plug your phone in and reflash the stock boot image.
I tried its didn’t work..
eliastheone said:
I tried its didn’t work..
Click to expand...
Click to collapse
But you can get to fastboot mode, right? I think you need to flash raw rom and start again. Unless someone else has any suggestions...
reg66 said:
But you can get to fastboot mode, right? I think you need to flash raw rom and start again. Unless someone else has any suggestions...
Click to expand...
Click to collapse
No, I couldn’t get in fastboot please help me!
eliastheone said:
No, I couldn’t get in fastboot please help me!
Click to expand...
Click to collapse
Sorry dude, no idea what to suggest of you can't even reach fastboot..
And you've plugged it into the USB on the side, right? 8 know sometimes I forget that I have to use the side one when flashing boot images and things.
No reason why magisk would cause that issue.
okay guys now somehow I cant get in the fastboot but I get this massage
"FAILED, fastboot.exe flash all WW_ZS660KL_16.0631.1908.12_M3.13.33.28-ASUS_1.1.3_Phone-user.raw failure, EXIT"
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
You can get in it? If you can just flash the unrooted boot image.
Cannot flash Pixel 5 back to stock Android for Calyx. Have tried everything.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
As soon as I enter fast boot mode the phone disconnects from my computer or something. I can't get it to work with the Flash Tool or without it. Has anyone else had this problem? I'm at a loss and don't know what to do.
I get this error as attached.
Have you got usb debugging on ? And bootloader unlocked
jaythenut said:
Have you got usb debugging on ? And bootloader unlocked
Click to expand...
Click to collapse
Yes, I have bootloader unlocked and debugging turned on.
Open your Windows Device Manager while connected in fastboot mode (Right click Windows logo -> Device Manager).
Do you see your phone in the list with an exclamation or question mark?
Open your Windows Device Manager while connected in fastboot mode (Right click Windows logo -> Device Manager).
Do you see your phone in the list with an exclamation or question mark?
Try with a USB-A to C cable. Do not use the supplied C to C cable.
There is something wrong with Calyxos.
Unlocked bootloader becomes LOCKED when you try to use flash.android.com on the first reboot.
How did I get it ON the phone if it was locked? well, it wasn't and now Calyx won't unlock the boot loader (even though it says it is)
Calyx website is not working.
I don't have windows, This is F'd
Anyone able to help me get this garbage off my phone?
Hello, I made a mistake on closing my oem unlocked with the rooted rog 3 android 12 and now i have entered CSC Fastboot mode
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I have tried things like doing this method where I have to flash the Raw rom but it didnt work because I keep on getting this
I have also triedusing the unbrick/bricked method but whenever I open the edl cmd, it keeps on closing.
I have also tried these 3 cmd fastboot commands but it didnt work
I have also tried flashing these 3 image file, (boot, recovery, and dtbo) from the unbrick/ brick xda but i keep on getting this
I have tried thses methods but it didnt work or I dont know the commands. Pls, I need help
You will be in CSC FB mode only, as long as your bootloader is locked. Unlocking your bootloader again will bring you back in the right Fastboot mode. EDL mode should work however, don't know why you have trouble with it...
Andrologic said:
You will be in CSC FB mode only, as long as your bootloader is locked. Unlocking your bootloader again will bring you back in the right Fastboot mode. EDL mode should work however, don't know why you have trouble with it...
Click to expand...
Click to collapse
hello, i did all the proccedure to get out of csc fastboot but after I used the flashall.bat, it installed the qssi.userdebug.m1 rom and i cant get out because the rog unlock isnt working/compatible even though it is rog 3... pls help. many thanks