Rich (BB code):
I am not responsible for bricking any of your devices.
This is a warning that I have not tested some of the ROMs in this thread, and they have a chance of risking your device.
It's my responsibility to put these GSIs for the forum,
but also your responsibility to flash them and risk bricking your device.
Help the forum by replying with a update on this thread if you could get any of these GSIs to boot, if you want.
!!! I WILL NOT TEST ANY GSIs ANYMORE IN THIS THREAD !!!
I will continue adding GSIs to the thread, but it will be your responsibility to
flash them and risking bricking your device.
Anyone can help by flashing them and posting a update.
Nippon GSIs do not boot, either they will boot to fastboot, bootloop or get stuck at the logo.
I always recheck the GSIs before adding them, but be aware, not all of the GSIs are compatible. If you test any of them and you couldn't boot it, please leave a reply about it.
Probably since this thread was created, all of the GSIs are outdated, but are stable and should boot fine.
If you want to look for a update please request it and I'll try looking for the most recent version.
You can also suggest a GSI or port.
XIAOMI.EU DEVELOPERS WILL SUPPORT MEDIATEK DEVICES IF WE SHOW OUR SUPPORT!Even though, and sadly, both of the devices of this forum do not have alot of recognition for modding... we just need to hope that we atleast get MTK support by xiaomi.eu, and if one day it happens even getting their ROMs to us.
Check here > https://xiaomi.eu/community/threads/community-funded-mediatek-support-initiative.66319/#post-663912
Click to expand...
Click to collapse
First off, obviously follow this guide to flash a GSI.
Currently, the best and recommended GSI for both the POCO M3 Pro and Redmi Note 10 5G are the PHH GSI by @phhusson, LineageOS by @AndyYan and Pixel Experience 12 by @ponces. But don't worry, if you do not prefer these ROMs, I am keeping this thread updated whenever I can find GSIs for both of the devices in this forum.
Here's the recommended GSIs
Pixel Experience Plus (12L / 12.1) by poncesINFORMATION REGARDING PIXEL EXPERIENCE PLUS: JULY UPDATE/V415 (expand below)
Click to expand...
Click to collapse
Please do not apply the update on your device. You shouldn't worry about automatic updates, as I am pretty sure they don't exist in this system image.Applying the update gives you a mission to not turn off or restart your phone.Applying the update and restarting your device, either the POCO M3 Pro 5g or Redmi Note 10 5G, will soft-brick it, booting everytime to MIUI recovery.The only way to recover it is by reflashing the v414 update. DO NOT reflash v415 and above. v415 & above relate issues to not booting on MTK.Thanks skm_1 for the first warning.
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Lineage OS 19.1 (12L / 12.1) by Andy Yan's
Click to expand...
Click to collapse
Official Generic System Images
AncientOS V6.2
Android version: 12
Build variant : G-Apps & Vanilla
Build version : 6.2 | Shield
Build date : 17-04-2022
Maintained by: Nazim
Official Ancient OS website
Telegram message link
Sourceforge download
Select "AncientOS-S-Shield-v6.2-arm64_bgN-Steel-20220417.img.xz"
Click to expand...
Click to collapse
Extract the "system.img" from the .xz folder downloaded and move it to your fastboot folder and flash the GSI with the designed instructions.
Use the "vbmeta.img" from the flashing guide.
Click to expand...
Click to collapse
ROM test status: Untested
CorvusOS
Android version: 12
Build variant: G-Apps & Vanilla
Build version: unknow (0800?)
Build date: unsure? (03-06-2022)
Maintained by: Tipz Team
Official Corvus OS website (DO NOT DOWNLOAD GSI FROM HERE, DOWNLOAD BELOW (last GSI update was before Android 12 release, and flashing it wouldn't boot due to vendor being supported to Android 12 systems (if your device runs Android 11, MIUI 12.X, you can flash the GSI from them)
Sourceforge download
Select "Corvus_vS3.0-Revenant-treble_arm64_ab-Gapps-Beta-Official-0800.img.xz" for Google Apps included variant
Select "Corvus_vS3.0-Revenant-treble_arm64_ab-Beta-Official-0800.img.xz" for Vanilla variant
Click to expand...
Click to collapse
Extract the "system.img" from the .xz folder downloaded and move it to your fastboot folder and flash the GSI with the designed instructions.
Use the "vbmeta.img" from the flashing guide.
Click to expand...
Click to collapse
ROM test status: DSU Sideloaded, should boot into slot
StatiXOS
Android version: 12L
Build type: unknow? (G-Apps included, no Superuser)
Build version: v5.2
Build date: 10-06-2022
Maintained by: StatiX Team
Telegram releases group
Download here
Select "statix_arm64-20220610-12-v5.2-OFFICIAL-image.zip"
Click to expand...
Click to collapse
Extract the "system.img" from the .zip folder downloaded and move it to your fastboot folder and flash the GSI with the designed instructions.
Use the "vbmeta.img" from the flashing guide.
Click to expand...
Click to collapse
ROM test status: Untested
AOSP
Android version: 12L
Build type: G-Apps & Vanilla
Build version: v414 Stable Release, v415 Pre-Release
Build date: 10-06-2022 Stable Release, 16-07-2022 Pre-Release
Maintained by: phhusson
Download here
Do not flash pre-release version! You might encounter perfomance issues. On my using of Pixel Experience Plus (the above one recommended) had a worse perfomance than MIUI, asides the aggressive app killing that MIUI includes. Just as wetito said here, use AOSP version 414 for now.
Select "system-squeak-arm64-ab-gapps.img.xz" for Google Apps included variant
Select "system-squeak-arm64-ab-vanilla.img.xz" for for Vanilla variant
Click to expand...
Click to collapse
Extract the "system.img" from the .xz folder downloaded and move it to your fastboot folder and flash the GSI with the designed instructions.
Use the "vbmeta.img" from the flashing guide.
Click to expand...
Click to collapse
Unofficial Generic System Images
UPDATED ArrowOS
Android version: 12.1 (updated to Snow Cone V2)
Build type: G-Apps & Vanilla
Build version: unknow
Build date: 19-07-2022
Maintained by: Nazim
Official Arrow OS website (NO GSI, DOWNLOAD BELOW)
Telegram message link
Sourceforge download
Select "ArrowOS-12.1-arm64_ab-bgN-Unofficial.img.xz" for Google Apps included variant
Select "ArrowOS-12.1-arm64_ab-bvN-Unofficial.img.xz" for Vanilla variant
Click to expand...
Click to collapse
Extract the "system.img" from the .xz folder downloaded and move it to your fastboot folder and flash the GSI with the designed instructions.
Use the "vbmeta.img" from the flashing guide.
Click to expand...
Click to collapse
ROM test status: Booted
Problems:
Setup error: Couldn't get past thru Google One Backup request screen;
Android 12 Material You customization is missing, such as wallpapers.
Thanks @brian00009 for the solution and telling another problem: Not adding a lock screen type (PIN, Password, Pattern, etc.) might fix the Google One Backup screen [FIX] | Material You customization is missing [PROBLEM]
New build date as of 19-07-2022 with S2 might fix these issues.
Cherish OS
Android version: 12L
Build type: Only G-Apps and superuser. No builds for non-root and vanilla.
Buid version: PHH v415
Build date: 17-07-2022
Maintained by: ChonDoe
Official Cherish OS website (DO NOT DOWNLOAD GSI FROM HERE, DOWNLOAD BELOW (last GSI update was before Android 12 release, and flashing it wouldn't boot due to vendor being supported to Android 12 systems (if your device runs Android 11, MIUI 12.X, you can flash the GSI from them)
Telegram message link
Download here
Select "CherishOS_v413-arm64-bgS_20220505.img.xz" and extract .img file inside the folder to flash it.
Click to expand...
Click to collapse
Extract the "system.img" from the .xz folder downloaded and move it to your fastboot folder and flash the GSI with the designed instructions.
Use the "vbmeta.img" from the flashing guide.
Click to expand...
Click to collapse
ROM test status: Untested
tnx for this helpfull thread. i confirm that all these gsi works fine. miui13 is suggested. if you have miui12.5 boot is not guaranted
wetito said:
tnx for this helpfull thread. i confirm that all these gsi works fine. miui13 is suggested. if you have miui12.5 boot is not guaranted
Click to expand...
Click to collapse
Thank you!
Arrow os has a big problem but does boot nromally. I will still leave it so anyone can try using it, but might remove it if no one can get past the google one backup screen
1lopes said:
Thank you!
Arrow os has a big problem but does boot nromally. I will still leave it so anyone can try using it, but might remove it if no one can get past the google one backup screen
Click to expand...
Click to collapse
I tried it, just don't add pattern/password/pin, and setup will be finished.
Anyways i think its still broken, customization is missing (a12 wallpapers settings etc) .
brian00009 said:
I tried it, just don't add pattern/password/pin, and setup will be finished.
Anyways i think its still broken, customization is missing (a12 wallpapers settings etc) .
Click to expand...
Click to collapse
Thank you so much for the update and the fix
The new build might fix the issue of Google One, and the Material You customization missing.
for users that love customizations corvus is the best. pphusson is the fastest and more optimized
I had an extremely bad time just there with the July update of Pixel Experience Plus; my M3 Pro 5G went into a POCO/MIUI Recovery loop. Took me 15 minutes to get it back into fastboot mode and I'm not even sure what I did differently in terms of holding the usual buttons down to reboot it. I flashed the June update back on and it's back to normal now.
skm_1 said:
I had an extremely bad time just there with the July update of Pixel Experience Plus; my M3 Pro 5G went into a POCO/MIUI Recovery loop. Took me 15 minutes to get it back into fastboot mode and I'm not even sure what I did differently in terms of holding the usual buttons down to reboot it. I flashed the June update back on and it's back to normal now.
Click to expand...
Click to collapse
I was about to update my redmi with PE too. I dont know if I do it. Thankfully you just had a soft brick, which means a bootloop.
The reason why you couldn't get to fastboot easiliy is probably because of it bootlooping and couldn't get the moment there to boot to fastboot, if I am sure.
Btw, thanks for telling us about it
install and test pphusson gsi on your device before other gsi version, is highly recomended
Nice
FlorinelulX said:
Nice
Click to expand...
Click to collapse
Thank you
Thread update as of 27-07-2022:
New 2 GSIs added
Cherish OS UNOFFICIAL & StatiXOS OFFICIAL
Thread update as of 27-07-2022, 18:16 WEST:
1 new GSI added
AOSP OFFICIAL
i dont suggest cherish.maybe latest rel is better, but when i try was very heavy and laggy
wetito said:
i dont suggest cherish.maybe latest rel is better, but when i try was very heavy and laggy
Click to expand...
Click to collapse
Thats the unnofficial GSI, and I can't seem to find the lastest release, I apologise.
The official one is before the android 12 release, so whoever still has android 11 with MIUI 12 could boot it with no problems.
1lopes said:
Thats the unnofficial GSI, and I can't seem to find the lastest release, I apologise.
The official one is before the android 12 release, so whoever still has android 11 with MIUI 12 could boot it with no problems.
Click to expand...
Click to collapse
i know. i have made a feedback. i have already tested it, so my experience could be helpfull
wetito said:
i know. i have made a feedback. i have already tested it, so my experience could be helpfull
Click to expand...
Click to collapse
My bad for the little misunderstanding, thank you
skm_1 said:
I had an extremely bad time just there with the July update of Pixel Experience Plus; my M3 Pro 5G went into a POCO/MIUI Recovery loop. Took me 15 minutes to get it back into fastboot mode and I'm not even sure what I did differently in terms of holding the usual buttons down to reboot it. I flashed the June update back on and it's back to normal now.
Click to expand...
Click to collapse
Tried it again just now using an abbreviated procedure suggested in another thread:
fastboot reboot fastboot
fastboot set_active a
fastboot flash system PixelExperience_Plus_arm64-ab-12.1-20220722-UNOFFICIAL.img
fastboot reboot
i.e. no "delete-logical-partition product" or "erase system". Result was still the MIUI Recovery boot loop. Luckily I made a much better job this time of getting the phone back into fastboot mode and was able to flash 20220613 back onto it.
How do i get root access with gsi roms? I'm using corvus os with m3 pro. I cant extract boot img
cigneve said:
How do i get root access with gsi roms? I'm using corvus os with m3 pro. I cant extract boot img
Click to expand...
Click to collapse
It's the same with the root guide simika did.
Patch the MIUI 13 or 12.X (if you used MIUI 13 before the GSI installation, extract the boot.img and patch it, same for MIUI 12.X) with ZArchiver.w
Now, if I do remember the steps, download the MIUI rom, extract it to a folder with ZArchiver, find "boot.img", copy and paste it somewhere on your phone.
Install Magisk apk, and use "Select and patch a file", put your extracted boot.img, then let it flash.
Now move the magisk patched boot.img to your fastboot folder in your computer and do the same steps in the guide, and be sure to have and flash vbmeta.img otherwise you might boot with dm-verity corruption.
https://github.com/phhusson/treble_experimentations/wiki/Generic-System-Image-(GSI)-list
for skm: i flashed many gsi with zero bootloops. i have rooted and unrooted my phone with zero bootloops. i'm sure you dont follow the guide step by step. post screenshoots with: your device model, stock rom and bootloader status, magisk status. with these informations maybe i could help you
Related
OnePlus 7 Open Beta for OnePlus 6!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
(time to update pic..)
Features:
Stock OnePlus 7 OxygenOS Open Beta 12 / Android 10 Firmware
Debloated
Automated Flasher
Decrypted
Performance tweaks
Full GCam7 Support
What works:
Almost everything, check bugs!
Auto rotation works (Thanks to Marlon for telling me!)
What doesn't work / Bugs:
Dolby
Notch Hiding in Settings.
Use MagiskHide 7 Pro (10) module to get certified (Netflix) (This may no longer be needed)
How to Install:
Make sure You're on OOS Open Beta Q or H2OS Q for Android 10 and OB22 for Pie.
Note: Backup Your nudes before flashing the rom!.
Boot TWRP
Flash Open Beta Q OTA.zip
Reboot to fastboot
Run flasher.bat
After it will finish flashing, Your phone will automatically reboot into OOS.
Once You go through SetupWizard You can boot into TWRP (which is built in) and root etc.
If You were on previous build, use dirty flasher.
Check screenshots in attached images!
Download:
OnePlus7 - Open Beta 12 V3 for OnePlus6 - Apr23
Old Pie Build (link may stop working)
OnePlus7 Pro for OnePlus 6 9.5.9 July 11
Warning! DO NOT flash OP7 OTA's! They may brick Your phone! If You end up flashing one anyway, just use EDL mode or fastboot to go back to stock firmware.
If You have any other problems, just ask here on XDA or for the fastest support PM me or ask someone in my group on Telegram
Join my group!
If You want to motivate me to work more, buy me a coffee!
https://www.paypal.me/protodevnano
Credits:
engstk for his amazing TWRP
fullofhell for firmware
Mauronofrio for 7T firmware
erfanoabdi for vendor patcher idea.
FunkWizard/OnePlus for latest firmwares!
OnePlus for creating OP6!
My friend Dylan for always supporting me
If I forgot anyone, just PM me on Telegram!
XDA:DevDB Information
[ROM][PORT][9.0.0] OnePlus 6T Port for OnePlus 6 [06.11.18], ROM for the OnePlus 6
Contributors
ProtoDeVNan0
Source Code: https://github.com/OnePlusOSS/android_kernel_oneplus_sdm845
ROM OS Version: 10.x
ROM Kernel: Linux 4.x
ROM Firmware Required: OxygenOS Open Beta Q or newer firmware
Based On: OOS
Version Information
Status: Stable
Created 2018-11-06
Last Updated 2018-11-06
Thank you for your work. Could you sum up what features do we get from this?
Also, do you think eventually you'll make a simple to flash in twrp to make it easier to install?
Tomatot- said:
Thank you for your work. Could you sum up what features do we get from this?
Also, do you think eventually you'll make a simple to flash in twrp to make it easier to install?
Click to expand...
Click to collapse
+1
Tomatot- said:
Thank you for your work. Could you sum up what features do we get from this?
Also, do you think eventually you'll make a simple to flash in twrp to make it easier to install?
Click to expand...
Click to collapse
New AOD, Live Wallpapers, New Dialer, New Messages App, some of the stuff that You can see in screenshots (OnePlus Laboratory etc). One more year of firmware updates (6T was launched with Pie).
And all features that OP6T will get in future updates that OP6 might not get.
And if You want, You can install it with TWRP. Just use flash image instead of flash zip. And then flash system.img to system, boot.img to boot and OP6T Vendor Patcher and that's it!
Edit: here's a video https://youtu.be/7pxkqAYylWE. You can skip flashing op6t vendor patcher and vbmeta. Those steps are most likely optional because it's OxygenOS.
Thanks developer .You are unique and thanks for trying new stuffs on OP6 . Waiting for MIUI 10 stable plzzzz work on it .
People don't flash this it's not working!!!
Can confirm the same. Wiped data through TWRP, but it said No OS installed. Also tried through fastboot, but it gave back an "Invalid size/header" error.
ProtoDeVNan0 said:
One more year of firmware updates (6T was launched with Pie).
Click to expand...
Click to collapse
1+ updates their smartphones equally
ProtoDeVNan0 said:
And all features that OP6T will get in future updates that OP6 might not get.
Click to expand...
Click to collapse
Via ota?
Not working..stuck in bootloader screen
biku123 said:
Not working..stuck in bootloader screen
Click to expand...
Click to collapse
You're in pie estable or beta before flash this rom?
Toni Moon said:
You're in pie estable or beta before flash this rom?
Click to expand...
Click to collapse
I am on stable 0S 9.02
Toni Moon said:
You're in pie estable or beta before flash this rom?
Click to expand...
Click to collapse
Pie stable
Sent from my [device_name] using XDA-Developers Legacy app
Thanks developer .
Downloading....
anasmhds said:
Thanks developer
Downloading....
Click to expand...
Click to collapse
doesnt work.
---------- Post added at 11:58 AM ---------- Previous post was at 11:53 AM ----------
I am on oos 9.02 i have downloaded the port. Then i flash TWRP to check the current slot. After that i flash system img using fastboot command .After flashing system img Phone become unresponsive so i again booted to boot-loader and flash vbmeta.img and boot.img then i again flash twrp and flash vendor patch .After reboot either phone goes to crashdump or stay on bootloader unlock warning screen??? any suggestiom
I have seen that its quite hard to install this ROM, the same kind of issues was also in pixel 3xl port, can't we get some simplified installation method just like other custom roms????
Will this erase all data in memory?
manudhomra said:
I have seen that its quite hard to install this ROM, the same kind of issues was also in pixel 3xl port, can't we get some simplified installation method just like other custom roms????
Click to expand...
Click to collapse
ya bro i have flashed more than five times.My wholeday wasted on this rom
some experience from myself.
1: Back up your application and data through Ti Backup
2: download the stock fast boot ROM of OOS
3: boot into bootloader and flash the stock OOS
4: when you done it, just get your ass back in the bootloader and flash the 6t's system IMG into SLOT A!
and the last thing just following the instructions.
One little problem is the system interface does not occupy the entire screen
Raymond.William said:
some experience from myself.
1: Back up your application and data through Ti Backup
2: download the stock fast boot ROM of OOS
3: boot into bootloader and flash the stock OOS
4: when you done it, just get your ass back in the bootloader and flash the 6t's system IMG into SLOT A!
and the last thing just following the instructions.
One little problem is the system interface does not occupy the entire screen
Click to expand...
Click to collapse
Only on Slot A?
And are we supposed to flash it only the system img and not other ones?
AndroidSword said:
Only on Slot A?
And are we supposed to flash it only the system img and not other ones?
Click to expand...
Click to collapse
and follow the thread creator's instruction. such as flash vbmeta etc
---------- Post added at 05:28 PM ---------- Previous post was at 05:23 PM ----------
AndroidSword said:
Only on Slot A?
And are we supposed to flash it only the system img and not other ones?
Click to expand...
Click to collapse
Sorry I misunderstood that you asked me next step how to do. Cause you flash the stock OOS ROM. So it should be in slot A
MIUI 11 China Dev for OnePlus 6!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Features:
Stock MIUI 11 China Dev 20.3.26 Android 10 / Mi8 Firmware - China Dev - Xiaomi.EU
Debloated
Automated Flasher
MIUI AOD Works.
Themes, Wallpapers, Ringtones work!
Live wallpaper works!
Full Screen Gestures work!
Mi AI works!
Dark Mode!
Custom Kernel Support!
F2FS Support! (Pie Only)
Notch Hiding!
GCam 7.3 Support!
GApps Built in
Multilanguage (Xiaomi.eu Only)
And more!
Mi Account Fix: Reset Your Password, and then login. It will log You in! Done! Enjoy!
Mi Account Fix 2: Tap to sign in with Google Account, then tap log in with another account, then log in and Done! Enjoy!
What works:
Almost everything, check bugs!
Brightness works great too!
What doesn't work / Bugs:
NFC (system doesn't support it)
Dash Charge charging indicator isn't showing up but phone charges fast anyway.
How to Install:
Make sure You're on latest Open Beta Q or H2OS Beta Q firmware!
Note: Backup Your nudes before flashing the rom! It will wipe Your internal storage.
As of 20.2.27 Build, EPR is no longer needed so just simply run force wipe flasher/dirty flasher (if previous build) and enjoy!
Use EPR before flashing this ROM! After that flash latest Open Beta Q twice,
and remember which slot You have resized!
New detailed Guide by @umangtayal
1. Reboot to TWRP blu_spark 3.3.1-x (v9.101).
2. Flash latest Open Beta Q for OP6 and twrp, and reboot to recovery
3. Again flash latest Open Beta Q and twrp and reboot to recovery (this will flash dp3 to both slots).
4. After latest Open Beta Q flashing is done, make sure you are in slot A of twrp (if you are in slot B, simply go to reboot and at the bottom select slot A).
5. Now in twrp(slot A), run epr on slot A.
6. After epr is done, your device will boot into fastboot.
7. Now run the MIUI flasher while in fastboot. This will flash MIUI to slot A (in slot B it will show "volume full" error, which is perfectly normal)
8. After flashing is done, you can reboot to recovery and flash magisk or simply reboot to system.
There is a seperate thread on EPR( enchilada partition resizer). if you dont know how to use epr, simply google it and you'll find the xda thread.
If You want to update, or You don't want to format Your data use "flasher_no_format_data".
Check screenshots in attached images!
Download:
Latest Build - Xiaomi.EU China Dev (GApps Included/Multilang)
MIUI 11 - 20.3.26 Xiaomi.EU for OnePlus6 Apr1
Old MIUI 10 Pie Builds
MIUI 10 Pie China Dev 9.7.22 for OnePlus6
MIUI 10 Fixes for 9.7.22 with Battery Fix
MIUI 10 Global Dev 9.5.30 for OnePlus6 & 6T
Warning! DO NOT flash MIUI OTA's! They may brick Your phone! If You end up flashing one anyway, just use EDL mode or fastboot to go back to stock firmware.
Note: I'm going to update this rom every time a new security patch comes out or something. I love MIUI 10/11 so I'll make sure to keep it up to date! (Don't expect day one updates though)
If You have any other problems, just ask here on XDA or for the fastest support PM me or ask someone in my group on Telegram
Join my group!
If You want to motivate me to work more, buy me a coffee!
https://www.paypal.me/protodevnano
Credits:
GeciSantos for BT Fix
Xiaomi.eu Team for their amazing Xiaomi.eu ROM!
EnesSastim for uploading MIUI 11 for me!
Some Chinese guy from MIUI forum for Watermark fix.
Guzram for partial gxzw fix & overlay advice.
Omar2005 for his audio fix.
Alex for Mi Account Fix!
dougie313 for a full audio fix!
erfanoabdi for vendor patcher idea.
fxsheep for his sgsi guide.
Lineage for cam libs.
OnePlus for creating OP6! Best device for roms :laugh:
My friend Dylan for always supporting me
If I forgot anyone, just PM me on Telegram!
XDA:DevDB Information
[ROM][PORT][9.0] MIUI 10 Pie 8.11.23 [08.12.18], ROM for the OnePlus 6
Contributors
ProtoDeVNan0
Source Code: https://github.com/OnePlusOSS/android_kernel_oneplus_sdm845
ROM OS Version: 10.x Q
ROM Kernel: Linux 4.x
ROM Firmware Required: OxygenOS DP3 or newer
Based On: MIUI 11
Version Information
Status: Stable
Created 2018-12-08
Last Updated 2019-09-10
Wow that is incredible.. thanks for your hard work. Will try later!
And first! Woo!
Thanks man ?
You are the king my friend
Thanks for porting it!
I'll install it if the youtube bug is fixed, thanks for this port!
Installing <3
Thanks ! You are on fire right now ^^
Will you be adding libraries for the alert slider(Just asking)
Great job btw?
Also I'm waiting for the Pixel 3XL Port just in case if you could fix the bugs
Awesome work, thx
on 6t. cant boot into miui10. get the device is corrupt screen. pressing power button twice as well.
changed slot to Oxygen OS and it booted fine (I had flashed MIUI 10 Pie on the inactive slot and then made it active). of course I did all the steps listed in the scripts including a data wipe.
im getting sound stuttering system wide. not just on youtube
Maybe with a custom app we can get alert slider working properly. Just thought...
Great Dev !
Screen touch work?
arceoxis said:
Maybe with a custom app we can get alert slider working properly. Just thought...
Click to expand...
Click to collapse
Have you tried natification slider app in xda apps?
munchy_cool said:
on 6t. cant boot into miui10. get the device is corrupt screen. pressing power button twice as well.
changed slot to Oxygen OS and it booted fine (I had flashed MIUI 10 Pie on the inactive slot and then made it active). of course I did all the steps listed in the scripts including a data wipe.
Click to expand...
Click to collapse
Try this:
Flash OOS 9.0.7 twice in TWRP(flash, reboot twrp, flash again). So that both A and B partitions will have 9.0.7
And then run the flasher with cmd or terminal. If You're on Windows. Just double tap on flasher and it will start flashing.
It's important to flash this rom with fastboot included in the zip.
So just run the flasher and not every command separately.
Before I made the flasher, lots of OP6 users couldn't boot it either.
ProtoDeVNan0 said:
Try this:
Flash OOS 9.0.7 twice in TWRP(flash, reboot twrp, flash again). So that both A and B partitions will have 9.0.7
And then run the flasher with cmd or terminal. If You're on Windows. Just double tap on flasher and it will start flashing.
It's important to flash this rom with fastboot included in the zip.
So just run the flasher and not every command separately.
Before I made the flasher, lots of OP6 users couldn't boot it either.
Click to expand...
Click to collapse
Hi, great work on getting the Pie Port to work
However, I need to ask you something like how bad is the YouTube sound stuttering?
AndroidSword said:
Hi, great work on getting the Pie Port to work
However, I need to ask you something like how bad is the YouTube sound stuttering?
Click to expand...
Click to collapse
Well. It's pretty bad. That's why it's my biggest priority.
romen288 said:
im getting sound stuttering system wide. not just on youtube
Click to expand...
Click to collapse
I think it might be related to DRM because in some places like Soundcloud and when You select a ringtone, it sounds fine.
ProtoDeVNan0 said:
Well. It's pretty bad. That's why it's my biggest priority.
I think it might be related to DRM because in some places like Soundcloud and when You select a ringtone, it sounds fine.
Click to expand...
Click to collapse
He my friend solved mi account issue by changing thede.plz look into it.
Cant download
Open Beta Ports for
OnePlus 6T!
••OnePlus 7 - Open Beta 14••
••OnePlus 7T - Open Beta 2••
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Another ROM created by "Jay's Dev Team"! With this Dev Team we will be able to provide ports for devices like 6T or 7 Pro, with the help of maintainers that will test everything and keep everything up to date! This way ports will be more stable, support won't be randomly abandoned anymore and I will be able to focus on more ports and once OP6 gets proper full port, 6T will get it afterwards too!
This thread will be mostly updated by MounirHero (Matrix).
Features:
Stock OnePlus 7 OxygenOS Open Beta 14 /Android 10 Firmware
Debloated
Automated Flasher
Performance tweaks
Improved system stability
Prebuilt Latest twrp 3.3.1-32 by Mauronofrio
Horizon lights
Prebuilt Magisk core
What works:
Almost everything, check bugs!
What doesn't work / Bugs:
•Stock Dolby
Use MagiskHide 7 Pro (10) module to get certified (Netflix)
CHANGELOG:
•Fixed Notch hiding issues
•New Clock Styles for ambient display
•Security Patch Level: 2020-05
•OxygenOS Version: OnePlus7 - Open Beta 14
•All op7 ob14 update features
•Updated overlays
•Updated to latest Open Beta
•OnePlus 8 pro Live Wallpapers (Addon folder)
•Prebuilt latest twrp
•Prebuilt Magisk core (install apk only)
(Old Changelog)
•OxygenOS Version: OnePlus7 - Open Beta 13 - Android 10
•Updated to Open Beta 13
•Security Patch Level: 2020-04
•All changes that came with Open Beta 13
•Updated Android security patch to 2020.04
•Improved system stability and fixed general bugs
•Fixed the crash issue while opening the stock camera App
•Fixed the black screen issue
•Smoother animations
•chromatic reading mode works!
•Prebuilt latest twrp 3.3.1-32 by mauronofrio
How to Install:
NOTE: Backup Your nudes before flashing the ROM this process will completely wipe your storage!
• Flash OOS 10/H2OS 10 (any stock Q)
• Reboot to fastboot and Unlock bootloader.
• Boot Device (don't skip this step).
• Reboot to fastboot.
• Connect phone to PC (Windows / Linux) •
On Windows PC:
• Unpack PORTED_ROM .zip
• If it's your first time flashing → Double Click "Clean Flasher.bat" (it could take 5-10 minutes to flash)
• Phone will boot automatically in Ported Firmware.
• Enjoy!
On Linux PC:
• Unpack PORTED_ROM .zip to a folder of your choice.
• Open Terminal, type "cd /home/..../your rom folder".
• If it's your first time flashing → type "sudo sh clean_flasher_linux.sh" (it could take 5-10 minutes to flash).
• Phone will boot automatically in Ported Firmware.
• Enjoy!
------------------------------------------------
[/LEFT]
-Flashing could take 5-10 minutes (Based on your PC/Laptop)
-install magisk for root.
-Additional system apps in the ADDON Folder (Install as normal apk)
Mega Folder
(ob13 and ob14 from mega folder requires 'EPR' so make sure to follow epr guide before flashing the rom)
Google Drive Mirror
OnePlus 7T OB2 BUILD(sep. 2019)
•mirror1
• mirror2
Warning! DO NOT flash OP7-7t OTA's! They may brick Your phone! If You end up flashing one anyway, just use EDL mode or fastboot to go back to stock firmware.
If You have any other problems, just ask here on XDA or for the fastest support PM me or ask someone in my group on Telegram
Join our group!
Jay's Dev Team:
Jay - Main Developer - Donate to Jay
MounirHero - OnePlus 6T Maintainer & Tester - Donate to Mounir
Credits:
MounirHero for maintaining and testing
ProtoDeVNan0 for base OP6 Port
erfanoabdi for vendor patcher idea.
FunkWizard/OnePlus for latest firmwares!
Mauronofrio for twrp.
OnePlus for creating OP6!
My friend Dylan for always supporting me
If I forgot anyone, just PM me on Telegram!
XDA:DevDB Information
[ROM][PORT][10.0.0] OnePlus7 OB 14 [21.05.2020], ROM for the OnePlus 6T
Contributors
ProtoDeVNan0
Source Code: https://github.com/OnePlusOSS/android_kernel_oneplus_sdm845
ROM OS Version: Android 10
ROM Kernel: Linux 4.x
ROM Firmware Required: OxygenOS OPEN BETA Q
Based On: OxygenOS
Version Information
Status: Stable
Created 2019-09-22
Last Updated 2020-05-24
it took a lot of effort,
it was my first port on oneplus 6T,
I hope to be able to bring other OEMs roms in the future.
Thank you @ ProtoDevNan0 for following me step by step,
and for giving me so much help. :highfive:
Some screenshots!:cyclops:
Hello Sir ProtoDevNano, been waiting for this, thank you.
7T HYBRID PORT screenshots
This looks promising. Would have flashed right away if Bluetooth was working.
WBT FP?
awesome its available now in 6t. ...
lately i only saw this in oneplus 6 furom
THANKS OP FOR BRINGING IT TO US
Thanks Dev for supporting 1+6t, And here are more testers available for 6t, pls support miui 11 rom tooooooo
Kind sir,
I'm on lineage os 17 android 10. Can you please let me know how to go to DP3 so that I can install this.
Thank you!
kumar akarsh said:
This looks promising. Would have flashed right away if Bluetooth was working.
Click to expand...
Click to collapse
Same here.
First impression is very good. - For me everything works out of the box, except the Video-Camera. Also, the preinstalled TWRP version did not cut it for me. The Storage Structure is the internal OS Structure. So it was impossible for me to install Magsik directly. After sideloading the newest Twrp Zip via Fastboot everything was back to normal. Magisk works fine.
AUSTIN said:
WBT FP?
Click to expand...
Click to collapse
Working exactly like on DP3 in this build
---------- Post added at 11:36 ---------- Previous post was at 11:34 ----------
ceo.mtcl said:
Kind sir,
I'm on lineage os 17 android 10. Can you please let me know how to go to DP3 so that I can install this.
Thank you!
Click to expand...
Click to collapse
http://telegram.me/JaysRoms
Check out our Telegram group for specified guides.
---------- Post added at 11:50 ---------- Previous post was at 11:36 ----------
Phoenix4Life said:
First impression is very good. - For me everything works out of the box, except the Video-Camera. Also, the preinstalled TWRP version did not cut it for me. The Storage Structure is the internal OS Structure. So it was impossible for me to install Magsik directly. After sideloading the newest Twrp Zip via Fastboot everything was back to normal. Magisk works fine.
Click to expand...
Click to collapse
Will be fixed on future build thanks for reporting:fingers-crossed:
Should this work with the T-Mobile version of the phone?
riazsudeen said:
Thanks Dev for supporting 1+6t, And here are more testers available for 6t, pls support miui 11 rom tooooooo
Click to expand...
Click to collapse
As soon as MIUI 11 will be out officially. I'll send my patches to Mounir and soon after that build will be released Pixel 3XL/4XL etc will be ported too.
I have a problem
I am in DB3 flashed the command "fastboot flash boot test-twrp-3.3.0-Q-fajita.img" TWRP and dsn loud instructions in TWRP booted.
Now the problem has only folders with numbers and letters in twrp, can not over twrp from phone copy.
What did I do wrong
Zimty86 said:
I have a problem
I am in DB3 flashed the command "fastboot flash boot test-twrp-3.3.0-Q-fajita.img" TWRP and dsn loud instructions in TWRP booted.
Now the problem has only folders with numbers and letters in twrp, can not over twrp from phone copy.
What did I do wrong
Click to expand...
Click to collapse
Nothing wrong it's an encryption issue with the recovery, I suggest you to sideload latest Mauronofrio twrp installer so everything Will be fine
MounirHero said:
Nothing wrong it's an encryption issue with the recovery, I suggest you to sideload latest Mauronofrio twrp installer so everything Will be fine
Click to expand...
Click to collapse
are the newer twrp synonymous for android q?
Does it require to resize the partition?
Zimty86 said:
are the newer twrp synonymous for android q?
Click to expand...
Click to collapse
You can't flash twrp with fastboot method since Q Is your OS, @ProtoDeVNan0 prebuilt Bluespark in the build, but It can't decrypt, Mauronofrio twrp 3.3.1.8 Is working flawselly, so I suggest you to sideload It if you want to root and flash stuff by your own.
---------- Post added at 16:12 ---------- Previous post was at 16:11 ----------
rob_z11 said:
Does it require to resize the partition?
Click to expand...
Click to collapse
No EPR tool is not necessary.
kumar akarsh said:
This looks promising. Would have flashed right away if Bluetooth was working.
Click to expand...
Click to collapse
Same here, I need BT to unlock my front door!
MIUI 11.2 20.3.12 for OnePlus 6T!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Another ROM made by Jay's Dev Team! Huge Thanks to @MounirHero for maintaining it! No more abandoned support, more frequent updates and tested builds! :victory:
This thread will be mostly updated by [B @MounirHero (Matrix).[/B]
Features:
•March security Patch.
•Automated Flasher.
•Stock Mi Mi 9 MIUI 11.2 20.3.36 Android 10 Debloated
•GAPPS included.
•Google Assistant
•GCam Support!
•TWRP 3.3.1-32 Prebuilt!
What Works
•Encryption
•Face Unlock
•Audio
•Wifi, Bluetooth, RiL
•Auto rotation
•Global Dark Mode!
•Notch Hiding!
•FullScreen Gestures
•MIUI Always On Display
•Themes, Live Wallpapers, Ringtones etc.
•Mi Account
•Mi AI
And more!
What doesn't work / Bugs:
- Reading mode/night light (use custom kernel)
- OnePlus FOD, alert slider)
- System wallpapers picker force closes
How to Install:
Make sure you're on H2OS Q or OOS Q with unlocked bootloader.
Notes: Backup Your nudes before flashing the rom! Use the Dirty Flasher at your own risk.
On Phone
0. Flash OOS 10/H2OS 10/DP3 Q (any stock Q ROM)
1. Reboot to fastboot
2. Unlock bootloader
3. Boot Device
4. Reboot to fastboot
5. Connect phone to PC.
On PC
0. Unpack Mi 9 MIUI 11 20.3.12 OnePlus6T zip
1. Double Click Clean Flasher bat (it could take 5-10 minutes to flash)
2. Phone will boot automatically in Xiaomi Mi 9 Firmware.
3 .Enjoy! After setup reboot to recovery and install MAGISK (inside Addon folder) if you want.
Warning! DO NOT flash MIUI OTA's! They may brick Your phone! If You end up flashing one anyway, just use EDL mode or fastboot to go back to stock firmware.
Download
If You have any other problems, just ask here on XDA or for the fastest support PM me or ask someone in my group on Telegram
Join our group!
Jay's Dev Team:
Jay - Main Developer - Donate to Jay
MounirHero - OnePlus 6T Maintainer & Tester - Donate to Mounir
Credits:
MounirHero for maintaining and testing
ProtoDeVNan0 for base OP6 Port
erfanoabdi for vendor patcher idea.
FunkWizard/OnePlus for latest firmwares!
OnePlus for creating OP6/6T!
My friend Dylan for always supporting me
If I forgot anyone, just PM me on Telegram!
XDA:DevDB Information
[ROM][PORT][10.0.0]Xiaomi Mi 9 MIUI 11.2_20.3.26[02.04.2020], ROM for the OnePlus 6T
Contributors
ProtoDeVNan0
Source Code: https://github.com/OnePlusOSS/android_kernel_oneplus_sdm845
ROM OS Version: Android 10
ROM Kernel: Linux 4.x
ROM Firmware Required: OxygenOS DP3
Based On: MIUI
Version Information
Status: Stable
Created 2019-09-25
Last Updated 2020-05-24
Reserved
Reserved
Thanks everyone for support! We're very proud!
we're sorry about the same bugs as in previous build.
But we don't have official open beta Q yet as base.
EPR GUIDE
-select storage '64' '128' '256'
-type 'system'
-Type 'a'
EPR OP6/6T
Some screenshots attached ?️
What's EPR? A little more about the complete installation procedure and if possible adding links would be very useful
Hello there, firstly thanks dev and testers for your time and effort for developing this new rom, second of all... excuse my ignorance but what's EPR? One of installation requirements.Thanks and have a great day.
oscarmaldonado said:
Hello there, firstly thanks dev and testers for your time and effort for developing this new rom, second of all... excuse my ignorance but what's EPR? One of installation requirements.Thanks and have a great day.
Click to expand...
Click to collapse
Enchilada partition resizer EPR-----https://forum.xda-developers.com/oneplus-6/how-to/tool-epr-enchilada-partition-resizer-t3963587
Yeaaaaaaaaaaah buddy!
Just to verify, EPR is actually needed for this, correct? I know it's stated, just making sure it wasn't just a copy/paste instructions error.
SREEPRAJAY said:
What's EPR? A little more about the complete installation procedure and if possible adding links would be very useful
Click to expand...
Click to collapse
https://forum.xda-developers.com/oneplus-6/how-to/tool-epr-enchilada-partition-resizer-t3963587
Just realized something. This is DP3 based. Can someone on VZW try this out? Got mad System UI crashes that appeared to be related to VZWs network on DP3.
Anyone know if this would work with the T-Mobile version that has been running international version of oos?
ProtoDeVNan0 said:
MIUI 11 9.9.24 for OnePlus 6T!
How to Install:
Make sure You're on DP3
Note: Backup Your nudes before flashing the rom!.
This ROM requires EPR! Pay attention to slots!
Use EPR
Boot TWRP
Flash DP3 OTA.zip
Reboot to fastboot
Run flasher.bat
Once You boot fully, You can boot into TWRP (which is built in) and root etc.
Click to expand...
Click to collapse
I'm just curious, after official OOS 10 OTA is released will all ROMs such as this be re-based and the whole DP3 and EPR thing will be obsolete?
Causical said:
I'm just curious, after official OOS 10 OTA is released will all ROMs such as this be re-based and the whole DP3 and EPR thing will be obsolete?
Click to expand...
Click to collapse
MIUI 11 Port has a bigger system image than OP6/6T 's actual system partition and is difficult to debloat.
So for now is needed.
DP3 base will be switched with OB and most bugs will probably get fixed.
cultofluna said:
https://forum.xda-developers.com/oneplus-6/how-to/tool-epr-enchilada-partition-resizer-t3963587
Click to expand...
Click to collapse
Tried every possible trick, getting stuck at bootloader. Not able to boot into recovery after ERP
Suhas_JS said:
Tried every possible trick, getting stuck at bootloader. Not able to boot into recovery after ERP
Click to expand...
Click to collapse
Having the same issue, says "load error" when trying to boot twrp
Suhas_JS said:
Tried every possible trick, getting stuck at bootloader. Not able to boot into recovery after ERP
Click to expand...
Click to collapse
Updated guide now everything should be fine.:good:
Hi, i follow your Guide, but after flash stucks on Oneplus Logo :/
thanks for this one.... it so cool?
sakarya1980 said:
Hi, i follow your Guide, but after flash stucks on Oneplus Logo :/
Click to expand...
Click to collapse
Try again, use msm, unlock bootloader and re do everything
Boot TWRP
Flash DP3 OTA.zip
Flash twrp installer zip
Reboot recovery
Again
Flash DP3 OTA.zip
Flash twrp installer zip
Reboot recovery
Use EPR
Once in fastboot
Run flasher.bat
sakarya1980 said:
Hi, i follow your Guide, but after flash stucks on Oneplus Logo :/
Click to expand...
Click to collapse
As said EPR is not working in 6t after selecting the size and slot the cmd closes itself and device is not restarting itself into fastboot as said. I think EPR is not working on 6t bcoz Dev doesn't own a 6t device. Check ur screen shot u find error last flash failed volume full that's the problem EPR in 6t not working.
lineage 18.1 is EOL for this device. 19.1 is now available:
https://forum.xda-developers.com/t/...rosshatch-android12-1-lineageos-19-1.4380097/
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
LineageOS is a free, community built, aftermarket firmware distribution of android, which is designed to increase performance and reliability over stock android for your device.
All the source code for LineageOS is available in the LineageOS Github repo. If you would like to contribute to LineageOS, please visit our Wiki for more details.
Downloads:
pixel 3 - blueline: https://download.lineageos.org/blueline
pixel 3 xl - crosshatch: https://download.lineageos.org/crosshatch
gapps zip (arm64): (optional): https://wiki.lineageos.org/gapps.html
Google Fi addon: https://sourceforge.net/projects/ra...-gapps-addon-arm64-11.0-20210212.zip/download (if you're on Google Fi, install this zip right after installing gapps zip.)
Android Auto addon: https://sourceforge.net/projects/ra...-gapps-addon-arm64-11.0-20201121.zip/download (if you want android auto, install this after installing gapps zip. note: this is only needed with opengapps)
Initial Install Instructions:
https://wiki.lineageos.org/devices/blueline/install
https://wiki.lineageos.org/devices/crosshatch/install
Update Instructions:
https://wiki.lineageos.org/devices/blueline/update
https://wiki.lineageos.org/devices/crosshatch/update
Upgrade Instructions: (from 17.1 to 18.1)
https://wiki.lineageos.org/devices/blueline/upgrade
https://wiki.lineageos.org/devices/crosshatch/upgrade
Notes:
1. lineage-18.1 comes with adb root that you can enable in developer options, but if you want root for apps, you can grab the magisk apk and rename it to .zip and install it in lineage recovery.
An alternative install method is to follow these boot.img patching instructions. You can get the boot img directly from the lineage download site. It's labeled as the recovery img but it's actually the boot img.
2. The newest vendor, radio, & bootloader are included in the lineage rom zip, so no need to worry about updating those manually.
Known issues:
1. when you format data in lineage recovery, you might see "cant send spi message". you can ignore it.
2. there's an issue with sprint mobile data not working. we're looking into it. there's an easy workaround though. send me a pm and i'll walk you through it.
Changelog:
blueline
crosshatch
Bug reporting:
https://wiki.lineageos.org/bugreport-howto.html
Source Code:
crosshatch device tree: https://github.com/LineageOS/android_device_google_crosshatch/tree/lineage-18.1
blueline device tree: https://github.com/LineageOS/android_device_google_blueline/tree/lineage-18.1
kernel tree: https://github.com/LineageOS/android_kernel_google_msm-4.9/tree/lineage-18.1
vendor tree: https://github.com/TheMuppets/proprietary_vendor_google/tree/lineage-18.1
Credits:
Many thanks to my fellow LineageOS team members and all the contributors out there in the community.
Android version: 11
Kernel version: 4.9.248
Status: nightly
Lovely!
Beauty and the beast
Havent tried it but many thanks for the active development...
I loved this rom I hope it continues the development
Can I update to or dirty flash from lineage 17.1 to lineage 18 on pixel 3?
New build with November security patch level. :good:
blueline rom zip - https://androidfilehost.com/?fid=10763459528675579025
blueline boot img - https://androidfilehost.com/?fid=10763459528675579024
i still dont know if the crosshatch builds even work. no reports on it yet, so no new builds. waiting on you guys. lol
crosshatch rom zip - https://androidfilehost.com/?fid=10763459528675580134
crosshatch boot img - https://androidfilehost.com/?fid=10763459528675580133
On crosshatch alternate build it's working very smooth and incredible well for first build, so far the only problem it's that gaming heats faster than usual.
razorloves said:
New build with November security patch level. :good:
crosshatch - i still dont know if the crosshatch builds even work. no reports on it yet, so no new builds. waiting on you guys. lol
Click to expand...
Click to collapse
Thank you so much, it works fine on crosshatch, any updates are highly appreciated!
For me, it is an exclusion criteria if there is no root and no lineageos available for a device.
____
The only problem for me was to use the wrong version of Magisk ending up in a non booting device.
So if you update to lineage-18 and want to get root, you will want to take the canary version of magisk manager to patch the boot.img.
#Crosshatch
great to see the simplest rom available
it booted with the first link provided.
much obliged
I will use it and report my experience with it.
---------- Post added at 07:23 PM ---------- Previous post was at 07:21 PM ----------
beanaman said:
Can I update to or dirty flash from lineage 17.1 to lineage 18 on pixel 3?
Click to expand...
Click to collapse
its highly recommended to clean flash it since its in beta status
razorloves said:
New build with November security patch level. :good:
blueline rom zip - https://androidfilehost.com/?fid=10763459528675579025
blueline boot img - https://androidfilehost.com/?fid=10763459528675579024
crosshatch - i still dont know if the crosshatch builds even work. no reports on it yet, so no new builds. waiting on you guys. lol
Click to expand...
Click to collapse
What is the ADB command to flash gapps? I have only flashed ROMs with gapps included
Zehlek said:
What is the ADB command to flash gapps? I have only flashed ROMs with gapps included
Click to expand...
Click to collapse
Just side load the zip file for the gapps
razorloves said:
New build with November security patch level. :good:
blueline rom zip - https://androidfilehost.com/?fid=10763459528675579025
blueline boot img - https://androidfilehost.com/?fid=10763459528675579024
i still dont know if the crosshatch builds even work. no reports on it yet, so no new builds. waiting on you guys. lol
crosshatch rom zip - https://androidfilehost.com/?fid=10763459528675580134
crosshatch boot img - https://androidfilehost.com/?fid=10763459528675580133
Click to expand...
Click to collapse
Crosshatch boot img it won't boot, it will go straight to bootloader, know bugs so far lte status bar icons aren't present on Nov patch update
Thanks to Razor we have the opportunity to have LOS .
I'll try it after work ?
Can anyone confirm if Android Auto works with this? A lot of the Android 10 roms did not, and that was a huge deal breaker for me, as I use Android auto daily.
New builds with some changes and fixes.
blueline rom zip - https://androidfilehost.com/?fid=10763459528675581018
blueline boot img - https://androidfilehost.com/?fid=10763459528675581017
crosshatch rom zip - https://androidfilehost.com/?fid=10763459528675580705
crosshatch boot img - https://androidfilehost.com/?fid=10763459528675580704
significant changes:
added power menu options (advanced restart) - https://review.lineageos.org/q/topic:eleven-powermenu
added support for skipping tracks with remote control - https://review.lineageos.org/292052
fixed missing status bar icons on devices with a notch - https://review.lineageos.org/292038
lineage recovery won't boot.
Hi razorloves. Thanks for all your hard work. But I'm having serious issues booting into any lineage recovery (I've tried multiple nightly builds from 17.1 and multiple boot.img from this thread). All are failing. I do fastboot flash boot boot.img (I've also tried both boot_a and boot_b) but once i reboot it goes back into fastboot and give me an error with the boot img. Yet when I do htis with twrp-3.3.0-0-blueline.img i boot into twrp fine. (only issue there being that the zip files for lineage os fail to flash when installing from twrp. I've also tried with stock recovery and that give the same error as twrp).
I should also note that when i do fastboot boot boot.img the boot just hangs and never goes through.
Any suggestions?
tantonj said:
Hi razorloves. Thanks for all your hard work. But I'm having serious issues booting into any lineage recovery (I've tried multiple nightly builds from 17.1 and multiple boot.img from this thread). All are failing. I do fastboot flash boot boot.img (I've also tried both boot_a and boot_b) but once i reboot it goes back into fastboot and give me an error with the boot img. Yet when I do htis with twrp-3.3.0-0-blueline.img i boot into twrp fine. (only issue there being that the zip files for lineage os fail to flash when installing from twrp. I've also tried with stock recovery and that give the same error as twrp).
I should also note that when i do fastboot boot boot.img the boot just hangs and never goes through.
Any suggestions?
Click to expand...
Click to collapse
Razorloves contacted me directly and help me sort out the issue. My problem is I first needed to flash to the CORRECT stock rom. (I was using the oldest android 9 rom. for 17.1 I needed newest 10 rom, for this I needed newest 11 rom).
Thanks,
xFaultx said:
Can anyone confirm if Android Auto works with this? A lot of the Android 10 roms did not, and that was a huge deal breaker for me, as I use Android auto daily.
Click to expand...
Click to collapse
Android Auto is not working for me. Crashes immediately after opening. I attached a logcat that should contain three failures right in a row.
tantonj said:
Razorloves contacted me directly and help me sort out the issue. My problem is I first needed to flash to the CORRECT stock rom. (I was using the oldest android 9 rom. for 17.1 I needed newest 10 rom, for this I needed newest 11 rom).
Thanks,
Click to expand...
Click to collapse
Is this a step that everyone needs to follow when upgradeing from LineageOS 17.1 to 18, or only if your still on OEM?
beanaman said:
Can I update to or dirty flash from lineage 17.1 to lineage 18 on pixel 3?
Click to expand...
Click to collapse
the migration changes are still in-work, so something might go wrong if you don't wipe data. you can follow the progress here: https://review.lineageos.org/q/topic:"eleven-db-migration"
ktdt00 said:
Android Auto is not working for me. Crashes immediately after opening. I attached a logcat that should contain three failures right in a row.
Click to expand...
Click to collapse
thx for log. will look into it.
FeralG said:
Is this a step that everyone needs to follow when upgradeing from LineageOS 17.1 to 18, or only if your still on OEM?
Click to expand...
Click to collapse
only when you're on stock rom