Related
Hi all,
I am facing severe problems with my P9.
Initial Situation:
Started with a brand new P9 with T-Mobile cust Firmware C150
What I did:
I unlocked bootloader successfully and rooted the phone. Then changed OEM info from C150 to C432. So far so good.
After that P9 booted into factory restore and restored itself into C900 Firmware. Bootloader was locked after that.
I unlocked bootloader successfully for a 2nd time.
Current Situation:
Now when I boot the phone it says: "Your device has been unlocked and can't be trusted" .... Your device is booting now... => But it never boots into OS. It stucks here forever.
When I press vol up and down and power for some seconds I can at least access TWRP. When I try to reboot in TRWP it says "No OS Installed".
But how can I do a stock recovery or install a working Android OS in order to get the P9 into normal boot Modus again?
Please help me.
Solution summary:
Issue solved by using the dload method to change to C432B182:
http://forum.xda-developers.com/p9/development/stock-rom-dload-file-p9-eva-l09-b136-t3382818/page1
Thx a lot
Hope this helps
https://www.youtube.com/watch?v=JZVsIKtdgV4
morro23 said:
Hi all,
I am facing severe problems with my P9.
Initial Situation:
Started with a brand new P9 with T-Mobile cust Firmware C150
What I did:
I unlocked bootloader successfully and rooted the phone. Then changed OEM info from C150 to C432. So far so good.
After that P9 booted into factory restore and restored itself into C900 Firmware. Bootloader was locked after that.
I unlocked bootloader successfully for a 2nd time.
Current Situation:
Now when I boot the phone it says: "Your device has been unlocked and can't be trusted" .... Your device is booting now... => But it never boots into OS. It stucks here forever.
When I press vol up and down and power for some seconds I can at least access TWRP. When I try to reboot in TRWP it says "No OS Installed".
But how can I do a stock recovery or install a working Android OS in order to get the P9 into normal boot Modus again?
Please help me.
Thx a lot
Click to expand...
Click to collapse
If u have a sd card u can put it in another phone if u have and create a dlod folder, put the Firmware u need in it and then switch it to your P9 and try to upgrade. Since your phone is C900 i think something went wrong in the debranding so use a full stock C150 firmware or try with this B136 Firmware with dt and hw folder toghether with update.app in dload folder.
http://forum.xda-developers.com/p9/development/stock-rom-dload-file-p9-eva-l09-b136-t3382818/page1
Sent from my VIE-L29 using XDA Labs
@panosm763: Thx for the Video link. I worked according to the same but after changing OEM info phone booted with red warning Screen and installed a fresh C900 Firmware Version. Then after opening bootloader again, SRK Tool cannot connect to the phone anymore maybe due to the fact that usb Debugging mode is not turned on (and cannot be turned on because OS is not reachable)
@Mostar088: I tried the dload method yesterday with the Firmware from the link you shared. Unfortunately without success. The phone did not recognize the Firmware and did not load the same. Maybe because bootloader is still open? I have no clue why this method is not working
Issue was solved.
It worked out fine using the dload method described in here:
http://forum.xda-developers.com/p9/development/stock-rom-dload-file-p9-eva-l09-b136-t3382818/page1
I am now on C432B182 :good:
morro23 said:
Issue was solved.
It worked out fine using the dload method described in here:
https://forum.xda-developers.com/p9/...-b136-t3382818
I am now on C432B182 :good:
Click to expand...
Click to collapse
Link doesnt work for me :? please again ?
MyTiplay said:
Link doesnt work for me :? please again ?
Click to expand...
Click to collapse
Fixed :good:
Sorry for being late, i had no spare time the past days. Glad you fixed your problem
Will i void my warranty if i updated my OS using the huawei updater alongside with HiSuite?
I will use this procedure to update my OS.
Update to Nougat B361 usingHuaweiUpdater
Only works on B190
-Only works CUST 636
-Only works EVA-L19DUALSIM
-Only works Unrooted devices and locked bootloader
C636B361
Custom ROM Version:EVA-L19C636B361
Custom ROM URL:http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1256/g104/v73940/f1/
1. InstallHuawei HiSuite(http://download-c.huawei.com/downlo...eCode=worldwide063&version=355249&siteCode=cn)
2. DownloadHuawei Updater 2.0(https://forum.xda-developers.com/devdb/project/dl/?id=21886)
3. ConnectphonetoPC, open HiSuite y established connection Hisuite <-->Phone(minimize HiSuite window)--> Not connect?, touch "Settings -Advanced Settings -> Security" and enable "Allow HiSuite HDB"
4. RunHuaweiUpdater,chek the box"Custom ROM" and "Custom Port"
5. In box "Custom ROM Version”,enter correct ROM version for flashing (EVA-L19C636B361)
6. In box "Custom ROM URL" enter correct ROM URL version for flashing (example:http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1256/g104/v73940/f1/)
7. Click on "Start" button and accept waiting alert messages
8. Maximize HiSuitewindows, touch on "Settings" --> "General" --> Custom Proxy and configure using:
Address:127.0.0.1
Port:41279
9. Back to main HiSuitewindowsand click on "System update"
10. Press "Update" and wait download firmware. Thissmartphonereboot and start upgrade!
Hi, Where did you get this procedure? Would like to read the original thread. Thanks.
Sent from my HUAWEI VIE-L29 using XDA Labs
No, your warranty will remain. You only lose it, when you unlock your bootloader.
I have a P9 EVA-L19 and I followed this process but the phone keeps on failing to verify the updater package. My current build is EVA-L19C636B190.
Am I missing something?
Shadowprince94 said:
No, your warranty will remain. You only lose it, when you unlock your bootloader.
Click to expand...
Click to collapse
ok thank you.
Winterheim said:
I have a P9 EVA-L19 and I followed this process but the phone keeps on failing to verify the updater package. My current build is EVA-L19C636B190.
Am I missing something?
Click to expand...
Click to collapse
i follow the procedure and it works very well. im now using the EMUI 5.
Maybe your HiSuite is not updated?
Jay Navea said:
Hi, Where did you get this procedure? Would like to read the original thread. Thanks.
Sent from my HUAWEI VIE-L29 using XDA Labs
Click to expand...
Click to collapse
https://forum.xda-developers.com/p9/help/p9-7-0-nougat-update-eva-lo9-b182-t3539754
it says no internet connection please check your setting when i select system update on hisuite. How to fix this problem?
Mikilo said:
it says no internet connection please check your setting when i select system update on hisuite. How to fix this problem?
Click to expand...
Click to collapse
Try disabling windows firewall, and starting updater as administrator.
Mikilo said:
it says no internet connection please check your setting when i select system update on hisuite. How to fix this problem?
Click to expand...
Click to collapse
remove everything after f1 in the url,so if u have L19C636 use
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1256/g104/v73940/f1/
instead of :
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1256/g104/v73940/f1/full/update.zip
spring80 said:
remove everything after f1 in the url,so if u have L19C636 use
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1256/g104/v73940/f1/
instead of :
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1256/g104/v73940/f1/full/update.zip
Click to expand...
Click to collapse
still no internet connection after changing the proxy setting of hisuite
Mikilo said:
still no internet connection after changing the proxy setting of hisuite
Click to expand...
Click to collapse
send screenshots for the settings u put in huawei updater and in hisuite
Mikilo said:
still no internet connection after changing the proxy setting of hisuite
Click to expand...
Click to collapse
U can use Firmware Finder to upgrade, just enable Installation via system update in Settings and change Proxy.
https://forum.xda-developers.com/tools/general/huawei-firmware-finder-team-mt-t3469146/page1
Sent from my VIE-L29 using XDA Labs
tried with no luck on huawei updater.
Firmware finder somehow managed to show an update but download are stuck at 0% and it will show no internet connection afterwards.
update **
after removing everything after f1/ at URL, huawei updater managed to download and install.. but failed at verifying the update. now i'm trying with android version of firmware finder
Failed at verifying the update.
lipanz said:
tried with no luck on huawei updater.
Firmware finder somehow managed to show an update but download are stuck at 0% and it will show no internet connection afterwards.
update **
after removing everything after f1/ at URL, huawei updater managed to download and install.. but failed at verifying the update. now i'm trying with android version of firmware finder
Click to expand...
Click to collapse
Same problem here. I am using a P9 EVA-L19C636B190, firmware finder didn't work for me neither. And no OTA or Hicare updates, so no clue when are we going to have Nougat. :crying:
Update to B361
lipanz said:
tried with no luck on huawei updater.
Firmware finder somehow managed to show an update but download are stuck at 0% and it will show no internet connection afterwards.
update **
after removing everything after f1/ at URL, huawei updater managed to download and install.. but failed at verifying the update. now i'm trying with android version of firmware finder
Click to expand...
Click to collapse
I finally managed to update my P9 EVA-L19C636B190 to Nougat. On the Huawei Updater I used this link http:*//*update.hicloud.com:8180/TDS/data/files/p3/s15/G1256/g104/v73917/f1/ (take the * in between out of the link). After the download the verification was fine and now I am running EMUI 5.0 without any issue.
Source: http:*//*club.huawei.com/thread-11960705-1-1.html (same as before, take the * in between out of the link)
I hope I can help you.
Best regards.
Please help. I managed to install the update only upto 60% then it failed. Now my phone is stuck in a bootloop. I already tried to restart my phone by holding the power key for a while. Then I turn it back on by pressing the vol up key and power in my hopes of restoring the phone to its factory setting using the built in recovery of the phone but it failed. While on Huawei eRecovery, it can still connect to wifi but after a few seconds of trying to connect to server, it says "Getting package info failed."
I also tried to use the system recovery of Huawei HiSuite(v5) but it says that my phone is not supported for system recovery. By the way, my phone is Huawei P9 EVA-L19C636B190. The firmware that i tried to flash was EVA-L19C636B361.
Is there anything else that I can do?
jeansquared said:
Please help. I managed to install the update only upto 60% then it failed. Now my phone is stuck in a bootloop. I already tried to restart my phone by holding the power key for a while. Then I turn it back on by pressing the vol up key and power in my hopes of restoring the phone to its factory setting using the built in recovery of the phone but it failed. While on Huawei eRecovery, it can still connect to wifi but after a few seconds of trying to connect to server, it says "Getting package info failed."
I also tried to use the system recovery of Huawei HiSuite(v5) but it says that my phone is not supported for system recovery. By the way, my phone is Huawei P9 EVA-L19C636B190. The firmware that i tried to flash was EVA-L19C636B361.
Is there anything else that I can do?
Click to expand...
Click to collapse
Use Dc Phoenix to unbrick it.
https://www.dc-unlocker.com/DC-Phoenix-flash-repair-tutorial
Sent from my VIE-L29 using XDA Labs
Finally! I was able to fix my Huawei P9 by flashing EVA-L19C636B168. I extracted the update.zip file and copied the UPDATE.APP in mini SD card inside dload folder using my computer. My phone got error at 99% during update so I got worried for a bit. I restarted the phone and it seemed like everything is working fine (I hope so). I've been using this phone for several hours now and I haven't encountered any issues so far.
To those who are still having the same issue, this might work for you. Don't give up because there is still hope.
HiSuite doesn't work anymore with this proxy settings. Keep saying no internet connection available even you turn off any firewall.
Hi guys I have a problem. I tried to upgrade my p9 plus manually with an ota update.
I had VIE-L09ITAC555B130 and I tried to install VIE-L09ITAC555B360 to get emui 5.0. The updater wasn't able to complete the download so I tried manually. B360 is split in two files (I don't know why, this is my first Huawei), I tried the first but at 30/40% I got an error, then I tried the second update.app and now my phone boot in eRecovery mode.
I can also boot in fastboot mode but my bootloader is locked and I can't get the product ID.
I also tried to install B130 again but it didn't complete the process. I don't know what to do anymore, some suggestion?
Sorry if my english is pretty bad...
I have successfully unlocked the bootloader and managed to install TWRP 3.1.0-3 but that's about it. I cannot install any other TWRP version but the one I mentioned. I tried installing Magic Rainbow custom ROM but it doesn't work properly (apps are super slow, entering developer settings makes the settings app crash, can't set a password etc.). So with that I can at least access the phone interface with limited options. Developer settings crashes when I choose it; if I can get through then I can't enable USB debugging, it keeps turning itself off right as I enable it. I can't use update function so I have to use 3 button installation, which randomly fails to work very often. Due to this I haven't been able to install any updates.
I kinda gave up on rooting already, I just want to get my old firmware back at this point but I can't even do that. SRKTools stock marshmallow recovery doesn't work either. It's as if TWRP 3.1.0 has taken over everything. On the rare occasions that I managed to get EMUI update via 3 button installation it would say that the update doesn't match the current version (or something like that). I tried using recover for b378 and managed to run the 3 button update but it always gets stuck at 5%. It gives up after a while, tries booting twice and then goes into eRecovery screen. My bootloader PHONE unlocked text is in red if it matters.
I've been actively trying to fix this for the last 11 hours (yes I'm not exaggerating at all). Please, PLEASE someone help me out with this!
I've also tried using the unbrick tool of the latest SRK Tool 2.0 for b378. It goes flawless, phone restarts and does a factory wipe but then doesn't boot after the Huawei screen. It tries booting twice and then it goes into eRecovery screen. Have I ruined some hardware here?
It seems like 3 button upgrade is my salvation and it doesn't work. Many times I hold it down, I get a slightly different screen but it again hangs at booting text. I managed to flash all recovery, boot and system image files and got the installing update screen in my b378 update, but it hangs at 5%. I couldn't even manage to get the installing update screen for common b136. Also when I try to flash system.img I get an error with flashing system which is FAILED (remote:sparse flash write failure).
First at all: The Magic Rainbow custom ROM is based on B383 so it wont work on B378 firmware thats your fault here.
Just flash the rollback package (find it in my signature) and after this flash B383 or if it not work start with B136. U have to do all with the dload method.
Fast solution?
https://forum.xda-developers.com/p9/development/p9-moonlight-rom-v1-0-b378-stock-t3567223
flash the B378 version. probably your problem is solved by this.
I'm very well aware that Magic Rainbow doesn't work with b378. That's probably the reason I have those issues with it. But it's the only way I can access the phone's interface in case I need to use it for a fix.
I tried flashing b378 already multiple times, without rollback and it did not work. Is it safe to use the rollback though? My oem is c432, would it create any issues to use that? Should I flash c900 oem first or can I go with the rollback right away? I literally cannot install any stock rom without having frozen/looping bootscreen atm so I can't complete any step that requires me to do that.
I've also tried flashing b136 plenty of times already. I can't even flash the system.img. I can't flash the system of any of the b100 series.
Lauran_N said:
I'm very well aware that Magic Rainbow doesn't work with b378. That's probably the reason I have those issues with it. But it's the only way I can access the phone's interface in case I need to use it for a fix.
I tried flashing b378 already multiple times, without rollback and it did not work. Is it safe to use the rollback though? My oem is c432, would it create any issues to use that? Should I flash c900 oem first or can I go with the rollback right away? I literally cannot install any stock rom without having frozen/looping bootscreen atm so I can't complete any step that requires me to do that.
I've also tried flashing b136 plenty of times already. I can't even flash the system.img. I can't flash the system of any of the b100 series.
Click to expand...
Click to collapse
u tried the rom i mentioned?
it is safe to use the rollback package. any firmware after will retrive your oem to c432. so you dont need to flash the oem info package.
1. flash rollback package via dload (watch out to have only the UPDATE.APP file in dload folder)
2. flash B383 via dload (2 files need to be flashed!)
3. flash special SuperSU_for_EMUI5.zip
4. have fun
again if u can boot magic rom then you can flash and use Moonlight rom v1.0
xtcislove said:
u tried the rom i mentioned?
it is safe to use the rollback package. any firmware after will retrive your oem to c432. so you dont need to flash the oem info package.
1. flash rollback package via dload (watch out to have only the UPDATE.APP file in dload folder)
2. flash B383 via dload (2 files need to be flashed!)
3. flash special SuperSU_for_EMUI5.zip
4. have fun
again if u can boot magic rom then you can flash and use Moonlight rom v1.0
Click to expand...
Click to collapse
I cannot flash rollback using 3 buttons method. I see the "your device is booting now" text and then it goes to TWRP menu. Nothing happens. This is what I mean with 3 button method not working. Every single update fails probably because of this. Is there anything else I can do to flash it?
I've also tried flashing b378 and then doing the rollback. Still doesn't work: It hangs at 5% as it did with the b378 update.
Also, is there a special way of flashing those 2 files of b383? Is it just one after another? I doubt I can flash them at the same time since they have the same name.
YES IT WORKED! Thank you the rollback actually made the difference. I had to go for b136 and then upgrade manually through there with the stock OS though. And I believe rollback changed the status to LOCKED instead of RELOCKED. And I was a complete moron for I couldn't do 3 button update because my cable was still plugged in. I had a moment of epiphany when I noticed what the symbol actually represents. It was like discovering who Keyser Soze was lol. Let this idiocy stay here for there might be others like me; this way they might fix it without embarrassing themselves like I did.
Glad it worked for you.
Next time just read the threads in this forum.
There are several toturials how to flash the p9 the right way.
Lauran_N said:
YES IT WORKED! Thank you the rollback actually made the difference. I had to go for b136 and then upgrade manually through there with the stock OS though. And I believe rollback changed the status to LOCKED instead of RELOCKED. And I was a complete moron for I couldn't do 3 button update because my cable was still plugged in. I had a moment of epiphany when I noticed what the symbol actually represents. It was like discovering who Keyser Soze was lol. Let this idiocy stay here for there might be others like me; this way they might fix it without embarrassing themselves like I did.
Click to expand...
Click to collapse
Can you explain in detail how your fact? That would be nice
Genysix said:
Can you explain in detail how your fact? That would be nice
Click to expand...
Click to collapse
1. Flash Rollback Package
2. Flash Firmware Package/s
3.Unlock booloader
4.Flash twrp
5.Flash SuperSU
6.Ready
Just read the threads in this forum guys and you errors will magically dissappear or not even happen
xtcislove said:
1. Flash Rollback Package
2. Flash Firmware Package/s
3.Unlock booloader
4.Flash twrp
5.Flash SuperSU
6.Ready
Just read the threads in this forum guys and you errors will magically dissappear or not even happen
Click to expand...
Click to collapse
Every time I try to flash, with 3 buttons method, it puts me "software install failed"
I tried to flash official rom with twrp but he can't finish the process.
I tried to flash custom rom. When I want to boot, he bootloop.
Hi,
I am at a complete loss and going round in circles. My phone has bootlocker unlocked message at moment. In adb fastboot devices finds the phone, but the SRK tool fails to find it sticking on 'waiting for phone'. I tried to flasg the Huawei rollback but that fails (presumably due to being unlocked). I cannot relock via fastboot as that gives 'remote: command not allowed' error.
Update
- I have just checked fastboot - it says Phone Unlocked & FRP Unlock.
- Next I used Huawei Update Extractor to get boot, recovery, cust & system img from the "HUAWEI_P9_Firmware_EVA-L09_Andriod 6.0_EMUI 4.1_C432B166_United Kingdom_Channel-Others" Package.
It seems I still cannot boot and device still says unlocked etc..
Update 2 :-
Copied the dload/update.app file from the HUAWEI_P9_Firmware_EVA-L09_Andriod 6.0 zip. Managed to get it to start installing, only to get Software Install Failed msg. However reboot let me start the phone. So currently have Build No: EVA-L09C432B166 on.
At this point I just want my phone either back to initial factory state or able to flash roms, whichever is easier to get to. Any help greatly appreciated. I've been getting nowhere following guides I have found, so would really appreciate some help here.
Thank You
Genysix said:
Every time I try to flash, with 3 buttons method, it puts me "software install failed"
I tried to flash official rom with twrp but he can't finish the process.
I tried to flash custom rom. When I want to boot, he bootloop.
Click to expand...
Click to collapse
Ok first of all, using TWRP back up everything you have there (backing up SD card isn't really needed unless you plan to wipe it too). Then, using TWRP again just wipe everything but OEM and SD card (external storage). Then, create a folder called "dload" in the main SD card directory and put ONLY the update.app in it (use the stock b136 as suggested). Now you need to flash a stock recovery using bootloader again. Just use the Huawei Update Extractor and get both recovery.img and boot.img from the rom that you're using to flash (in this case b136). Put them in the same folder as adb. Run adb cmd, write commands "fastboot flash recovery recovery.img" and then "fastboot flash boot boot.img" and finally "fastboot reboot". Quickly unplug your usb cable and use the 3 button force update (Vol Up+Vol Down+Power button all held together and don't let go until you see the update start). It should work without a problem if you had managed to wipe everything using TWRP. If it still doesn't work you could try deleting OEM info as well and flashing a new one (c432) which you can find on the forums. Back up is important in case it still doesn't work, you might need them to undo things.
If it boots, it means you've learned how to do it and you can probably unbrick it as much as you want haha. You can update to Nougat (7.0) and EMUI 5 using Huawei Updater 2.0 along with HiSuite, there is a guide here on the forums to do so by updating to b182 then to b360/b361>b378>b383 which I was unable to find for now. After that you can install a custom rom without an issue. I figured I wouldn't mess with it anymore but frankly it's likely that you are just soft bricking by skipping something very simple and failing because of that unless you went ahead and did things that you are explicitly told not to do so. If you end up having it unlocked/relocked might as well try and get a custom rom really.
If the update gets stuck at 5% or you have the icon of a usb cable end with a lightning on it your mistake is that you didn't unplug it. If the update keeps failing without these it's likely that you're using the wrong firmware and you could try using another one (FULL+PV+MV ones if you're going for a higher one). Or you could try to follow the rollback and then the update as I did. if you do the rollback then the update, your phone might get a LOCKED status again (yes not relocked).
If you are missing something or you think you have a stupid question and too shy to ask it here just PM me.
Phil_UK said:
Hi,
I am at a complete loss and going round in circles. My phone has bootlocker unlocked message at moment. In adb fastboot devices finds the phone, but the SRK tool fails to find it sticking on 'waiting for phone'. I tried to flasg the Huawei rollback but that fails (presumably due to being unlocked). I cannot relock via fastboot as that gives 'remote: command not allowed' error.
Update
- I have just checked fastboot - it says Phone Unlocked & FRP Unlock.
- Next I used Huawei Update Extractor to get boot, recovery, cust & system img from the "HUAWEI_P9_Firmware_EVA-L09_Andriod 6.0_EMUI 4.1_C432B166_United Kingdom_Channel-Others" Package.
It seems I still cannot boot and device still says unlocked etc..
Update 2 :-
Copied the dload/update.app file from the HUAWEI_P9_Firmware_EVA-L09_Andriod 6.0 zip. Managed to get it to start installing, only to get Software Install Failed msg. However reboot let me start the phone. So currently have Build No: EVA-L09C432B166 on.
At this point I just want my phone either back to initial factory state or able to flash roms, whichever is easier to get to. Any help greatly appreciated. I've been getting nowhere following guides I have found, so would really appreciate some help here.
Thank You
Click to expand...
Click to collapse
So you're saying that you're able to boot your phone on stock b166? Then update it to b182 first. I had to keep pressing the check update for a while before it popped up. I was busy at the time so I didn't mind the wait time but I bet you can do it faster forcefully, got to be a guide around here somewhere. Here is the guide to update it all the way to b383 from b182.
Lauran_N said:
So you're saying that you're able to boot your phone on stock b166? Then update it to b182 first. I had to keep pressing the check update for a while before it popped up. I was busy at the time so I didn't mind the wait time but I bet you can do it faster forcefully, got to be a guide around here somewhere. Here is the guide to update it all the way to b383 from b182.
Click to expand...
Click to collapse
I'm on B166 currently. Phone tells me it has update for B182, on reboot I get the device unlocked message and it sticks on 'Your device is booting now'.
Also tried Huawei updater....that sticks at 'Listened on Port 41279'
Thanks
Phil_UK said:
I'm on B166 currently. Phone tells me it has update for B182, on reboot I get the device unlocked message and it sticks on 'Your device is booting now'.
Also tried Huawei updater....that sticks at 'Listened on Port 41279'
Thanks
Click to expand...
Click to collapse
Getting the device unlocked message shouldn't indicate anything, only that you didn't lock it again. It might be that you didn't install your current rom correctly. You could try flashing TWRP, backing up everything and then wiping all of it f. It means you'll be romless for a while but worst case you can recover what you backed up with TWRP and then flash it with a stock rom again. There are guides to flashing everywhere and I've made my own guide here. I can't really give you advice on your situation since I haven't ever been there. I just dabble with these things, so I can't really find a solution for everything.
You are connected to HiSuite while running Huawei Updater right? It needs to be able to see your phone (usb debugging on or HDB mode) and set to usage via proxy.
Lauran_N said:
Getting the device unlocked message shouldn't indicate anything, only that you didn't lock it again. It might be that you didn't install your current rom correctly. You could try flashing TWRP, backing up everything and then wiping all of it f. It means you'll be romless for a while but worst case you can recover what you backed up with TWRP and then flash it with a stock rom again. There are guides to flashing everywhere and I've made my own guide here. I can't really give you advice on your situation since I haven't ever been there. I just dabble with these things, so I can't really find a solution for everything.
You are connected to HiSuite while running Huawei Updater right? It needs to be able to see your phone (usb debugging on or HDB mode) and set to usage via proxy.
Click to expand...
Click to collapse
Thanks for your help. Where do you set the usage to via proxy? Perhaps thats my issue.
Phil_UK said:
Thanks for your help. Where do you set the usage to via proxy? Perhaps thats my issue.
Click to expand...
Click to collapse
Run HiSuite. Make sure your phone is connected to it. Top right you'll see 4 buttons: 3 horizontal stripes, minimise, full screen and X. Press 3 stripes one and choose settings. In the first tab called General under the 4th section you'll see Proxy. Enable it and enter 127.0.0.1 for address and the given listening port as the port. Leave the username and password blank. Press apply. Then you probably have to choose the system upgrade from the main screen of HiSuite. I don't recall exactly but this is about how it goes.
Lauran_N said:
Run HiSuite. Make sure your phone is connected to it. Top right you'll see 4 buttons: 3 horizontal stripes, minimise, full screen and X. Press 3 stripes one and choose settings. In the first tab called General under the 4th section you'll see Proxy. Enable it and enter 127.0.0.1 for address and the given listening port as the port. Leave the username and password blank. Press apply. Then you probably have to choose the system upgrade from the main screen of HiSuite. I don't recall exactly but this is about how it goes.
Click to expand...
Click to collapse
Many Thanks
I managed to flash B360_update.zip via recovery instead. I also have a B360_update_data_full_hw_eu.zip but not sure what that is for.
Hello all,
I just got the V12.5.5.0 update on my Redmi Note 10 5G (Global).
After I rebooted the system tapping the complete notification it is stuck on the MIUI Recovery screen.
My device is not rooted. It just has received OTA updates.
I tried to reboot the system a few times, but it didn't work.
Also, I tried the safe mode, but it didn't work either.
After Reboot or safe mode, it returns to the MIUI Recovery screen.
I haven't tried the Wipe Data option because I want to back up my files first if possible.
Is there any way to back up my files or be able to fix it?
Please help.
Thanks in advance.
the only solution is enter into fastboot mode and flash stock fastboot firmware via miflash or similar tool
wetito said:
the only solution is enter into fastboot mode and flash stock fastboot firmware via miflash or similar tool
Click to expand...
Click to collapse
I tried that, but I am getting an error saying not allowed in locked state. It looks like the bootloader is locked, so I tried to use the Mi Unlock tool but I am getting error 1004. Also I tried wipe data, but it didn't work either. Right now, I don't care loss my data, I just want to have my phone back, any help is appreciated. Thanks
I have the exact same problem, after the update, lock on recovery mode, then when I tried to flash stock fastboot firmware it says that it is locked. And I also can't access Mi Unlock Tool for some reason, so if anybody has a solution to unlock bootloader I would really appreciate it.
Thanks
I got this same issue. Is there any way we can report this to mi? I don't mind if I lose my data rn, I just want this to start working normally again. someone please help if you know how to fix this
jyeros said:
Hello all,
I just got the V12.5.5.0 update on my Redmi Note 10 5G (Global).
After I rebooted the system tapping the complete notification it is stuck on the MIUI Recovery screen.
My device is not rooted. It just has received OTA updates.
I tried to reboot the system a few times, but it didn't work.
Also, I tried the safe mode, but it didn't work either.
After Reboot or safe mode, it returns to the MIUI Recovery screen.
I haven't tried the Wipe Data option because I want to back up my files first if possible.
Is there any way to back up my files or be able to fix it?
Please help.
Thanks in advance.
Click to expand...
Click to collapse
Same here, albeit I have Chinese version on Global ROM
wetito said:
the only solution is enter into fastboot mode and flash stock fastboot firmware via miflash or similar tool
Click to expand...
Click to collapse
Have you downgraded? Tried to, but accidentally locked bootloader. And it shows that version I have installed isn't compatible.
Use MTK Bypass for reparing https://megafon929.github.io/mtk
Timenator said:
Have you downgraded? Tried to, but accidentally locked bootloader. And it shows that version I have installed isn't compatible.
Click to expand...
Click to collapse
i'm an absolute beginner at this stuff, so could you tell me how to downgrade it?
i suppose try booting in safe mode dint work. the only solution is flashing full firmware, cause the ota packet is bugged.
try this tool
Home - Tool All In One
TOOL ALL IN ONE This tool support 67 different devices of some different OEMs. DOWNLOAD CHANGELOG XDA THREAD OTHERS PROJECTS
toolaio.tk
Timenator said:
Have you downgraded? Tried to, but accidentally locked bootloader. And it shows that version I have installed isn't compatible.
Click to expand...
Click to collapse
I received the device yesterday, the update notification arrived and I installed it, I didn't imagine it could be a problem, I tried to reinstall the rom but the bootloader is also blocked, I don't know what else to do, I'm desperate.
LucciM-Anon said:
i'm an absolute beginner at this stuff, so could you tell me how to downgrade it?
Click to expand...
Click to collapse
Rafaelmaga said:
I received the device yesterday, the update notification arrived and I installed it, I didn't imagine it could be a problem, I tried to reinstall the rom but the bootloader is also blocked, I don't know what else to do, I'm desperate.
Click to expand...
Click to collapse
Found a solution on web. If your phone is on Mediatek(I suppose all Note 10 5g are Mediatek? or no?) So, if it is, just look for an unlocker. You will also need MiFlash and I recommend to install Global MIUI 12.5.4. https://xiaomifirmwareupdater.com/miui/camellian/stable/V12.5.4.0.RKSMIXM/ - MIUI
Step by step guide:
How to Fix Your Hard Bricked Xiaomi Phone With Locked Bootloader
If you are familiar with custom ROM or flashing your phone, then there's a possibility that you have tried flashing your Xiaomi/Redmi/POCO Phone. Earlier
gadgetstouse.com
Timenator said:
Found a solution on web. If your phone is on Mediatek(I suppose all Note 10 5g are Mediatek? or no?) So, if it is, just look for an unlocker. You will also need MiFlash and I recommend to install Global MIUI 12.5.4. https://xiaomifirmwareupdater.com/miui/camellian/stable/V12.5.4.0.RKSMIXM/ - MIUI
Step by step guide:
How to Fix Your Hard Bricked Xiaomi Phone With Locked Bootloader
If you are familiar with custom ROM or flashing your phone, then there's a possibility that you have tried flashing your Xiaomi/Redmi/POCO Phone. Earlier
gadgetstouse.com
Click to expand...
Click to collapse
unfortunately this tutorial doesn't work here, I followed everything but it still didn't unlock the bootloader
Hi guys, I just woke up and my phone was in MIUI Recovery mode, just like yours.. Probably made the update automatically.
It seems this is a recent problem for many of us. I'm nowhere near an expect but I will continue looking for the solution (if possible, without whiping out the data or at least to be able to back-it up).
Will really appreciate if somebody posts if they find a solution.
Thanks!
The only solution is to wipe the phone. I got my lesson I will buy a samsung now
Hello all,
I got the V12.5.5.0 update to on my Redmi Note 10 5G (Global).
After I rebooted the system tapping the complete notification it is stuck on the MIUI Recovery 5.0 screen.
My device is not rooted. It just has received OTA updates.
I tried to reboot the system a few times, but it didn't work.
Also, I tried the safe mode, but it didn't work either.
After Reboot or safe mode, it returns to the MIUI Recovery screen.
I have tried the Wipe Data option and it worked and got me back to MIUI V12.5.4.0. But unfornnatly i lost all my files (about 90 Gb of data).
And this is the last i install any MIUI update until i see that a lot of user's have install it review it
My Poco M3 Pro 5G Global wasn't affected.
I manually download the OTA package and installed successfully.
This phone has a/b slot.
I'm wondering those facing this issue, have you tried switching from a to b slot or vice versa?
fastboot --set-active=a
fastboot --set-active=b
guyz92 said:
My Poco M3 Pro 5G Global wasn't affected.
I manually download the OTA package and installed successfully.
This phone has a/b slot.
I'm wondering those facing this issue, have you tried switching from a to b slot or vice versa?
fastboot --set-active=a
fastboot --set-active=b
Click to expand...
Click to collapse
i think the ota released by xiaomi is bugged. you're operation is correct, but a correct ota might do this automatically. i have noticed that many users with unlocked bootloader, after the update have phone that dont boot. i think they cant enter on fastboot mode. the only solution is flash using mediatek SP FLASH TOOL. or MI FLASH PRO. or ALL IN ONE TOOL
Was someone able to access the "Connect with MIAssistant" part using pcsuite?
I couldn't, but I think it might be because the USB cable I'm using is not the original one from Xiaomi or one compatible.
work only if you have installed also pcsuite on your device. if u have a full stock loked device only solutions are Mediatek tool or miflash pro! or all in one tool. as i said a million time already