Related
Hello, help would be amazing as this is my 2nd day trying to root my xPeria XZ Premium!
I've finally flashed twrp , I'm trying to install this rom:
https://forum.xda-developers.com/xz-premium/development/kernel-sony-xz-premium-5-2018-t3784669
But I'm getting stuck when trying to install magisk, OR move any zip files from my SD card to my Internal Storage.
Could anyone guide me through how to resolve this? :crying:
Have unlocked boot loader?
Need to format data first
xStatiZx said:
Hello, help would be amazing as this is my 2nd day trying to root my xPeria XZ Premium!
I've finally flashed twrp , I'm trying to install this rom:
https://forum.xda-developers.com/xz-premium/development/kernel-sony-xz-premium-5-2018-t3784669
But I'm getting stuck when trying to install magisk, OR move any zip files from my SD card to my Internal Storage.
Could anyone guide me through how to resolve this? :crying:
Click to expand...
Click to collapse
Hey my dude follow these steps, in twrp select wipe->format data (You'll lose all your files) now try flash the rom, you should find a custom kernel for your device as well and install it after the rom. If the Kernel doesnt install magisk now would be a good time to do it :highfive:
Matthewwwww1998 said:
Hey my dude follow these steps, in twrp select wipe->format data (You'll lose all your files) now try flash the rom, you should find a custom kernel for your device as well and install it after the rom. If the Kernel doesnt install magisk now would be a good time to do it :highfive:
Click to expand...
Click to collapse
This isn't necessary. Just extract boot.img from whatever rom.zip you're using, flash that in recovery, reboot to recovery again and magisk should install.
murph187 said:
This isn't necessary. Just extract boot.img from whatever rom.zip you're using, flash that in recovery, reboot to recovery again and magisk should install.
Click to expand...
Click to collapse
You're a GOD. Thank You!!!!!
updater process ended with error: 1
I was able to install magisk but after that if i try to install nethunter I get this same error. I am using redmi 4(santoni). have installed lineage OS 15.1
Can someone please help me?
logs
I had similar error shown below while installing a custom ROM:
Error applying update: 7 (ErrorCode:: kInstallDeviceOpenError )Updater process ended with ERROR: 1 Error installing zip file
Solved by using slightly older version of TWRP
i try and didnt work how to extract boot image in steps ??
magicstep said:
I had similar error shown below while installing a custom ROM:
Error applying update: 7 (ErrorCode:: kInstallDeviceOpenError )Updater process ended with ERROR: 1 Error installing zip file
Solved by using slightly older version of TWRP
Click to expand...
Click to collapse
which version you use
murph187 said:
This isn't necessary. Just extract boot.img from whatever rom.zip you're using, flash that in recovery, reboot to recovery again and magisk should install.
Click to expand...
Click to collapse
Hi, which option may i have to choose? there are 4 options
magicstep said:
I had similar error shown below while installing a custom ROM:
Error applying update: 7 (ErrorCode:: kInstallDeviceOpenError )Updater process ended with ERROR: 1 Error installing zip file
Solved by using slightly older version of TWRP
Click to expand...
Click to collapse
3.2.2 worked for me.
In my case unmounting all the partitions fixed it for me, the boot.img method didn't work.
magicstep said:
I had similar error shown below while installing a custom ROM:
Error applying update: 7 (ErrorCode:: kInstallDeviceOpenError )Updater process ended with ERROR: 1 Error installing zip file
Solved by using slightly older version of TWRP
Click to expand...
Click to collapse
I had flashed new version on firmware but forgot to update TWRP recovery that is why I was getting this error. I updated TWRP recovery. also flashed boot.img image then I was able to fix this issue.
guys please help me i have xiaomi mi a2 lite whit twrp 3.5.0_9 installed and unlocked bootloader i downloaded android 11 rom link: https://forum.xda-developers.com/t/rom-11-0-daisy-aosp-11-0.4167961/. When i go to recovery mode i flash the rom and appears this error: Updater process ended whit error: 1 to flash additional zips please reboot recovery to switch to the updated slots. Error installing zip file rom.zip. please help me.
THANKS
samyxy said:
guys please help me i have xiaomi mi a2 lite whit twrp 3.5.0_9 installed and unlocked bootloader i downloaded android 11 rom link: https://forum.xda-developers.com/t/rom-11-0-daisy-aosp-11-0.4167961/. When i go to recovery mode i flash the rom and appears this error: Updater process ended whit error: 1 to flash additional zips please reboot recovery to switch to the updated slots. Error installing zip file rom.zip. please help me.
THANKS
Click to expand...
Click to collapse
I was having the same issue... After hours of research I finely managed to fix it. Try the following:
1 - Install TWRP (I also had the 3.5.0_9 version).
2 - Format data and wipe all the advanced options possible.
3 - Download the program "payload_dumper-win64".
3.1 - Following the payload dumper instructions, I've copied the payload.bin from my custom ROM to the payload_input folder.
3.2 - Execute payload_dumper.exe and wait, a lot!
3.3 - Copy the resulted files (boot.img, system.img, vendor.img) in to the phone.
4 - In TWRP, go to install, select from images, and, one by one, install the images you've just copied.
4.1 - Note that during the install process, you will have to select the correct "slots" to flash the images. In my case, there where to options for system and vendor. I've chosen the "System Image" and "Vendor Image" option.
5 - Restart.
That's it! I didn't had to change slots nor wipe data after the installation... I don't know if this was the correct approach, but after many tries this is what worked for me
Sorry about my bad english...
Sometimes it is caused due to corrupted file. While transferring file through MTP it is likely to corrupt large files. I had the same problem. Then I tried copying file while in TWRP (sure it is also MTP) and it worked.
PendiukG said:
I was having the same issue... After hours of research I finely managed to fix it. Try the following:
1 - Install TWRP (I also had the 3.5.0_9 version).
2 - Format data and wipe all the advanced options possible.
3 - Download the program "payload_dumper-win64".
3.1 - Following the payload dumper instructions, I've copied the payload.bin from my custom ROM to the payload_input folder.
3.2 - Execute payload_dumper.exe and wait, a lot!
3.3 - Copy the resulted files (boot.img, system.img, vendor.img) in to the phone.
4 - In TWRP, go to install, select from images, and, one by one, install the images you've just copied.
4.1 - Note that during the install process, you will have to select the correct "slots" to flash the images. In my case, there where to options for system and vendor. I've chosen the "System Image" and "Vendor Image" option.
5 - Restart.
That's it! I didn't had to change slots nor wipe data after the installation... I don't know if this was the correct approach, but after many tries this is what worked for me
Sorry about my bad english...
Click to expand...
Click to collapse
It's legit procedure. Also you don't need to manage slots here, caz recovery automatically does that for you.
Hello guys, i'm from Russia, sorry for my bad English. I using Poco X3 Pro, and i have some troubles. I wanted to install custom firmware. First ROM
delivered successfully, unlike the second. After clearing all sections except sd cart and otg, I tried to install the original MIUI build, but it didn't work. I downloaded the original MIUI, but still. When installing, it says: "Update process ended with ERROR: 1" The methods from the top didn't help, please help!
Sushanthn94 said:
updater process ended with error: 1
I was able to install magisk but after that if i try to install nethunter I get this same error. I am using redmi 4(santoni). have installed lineage OS 15.1
Can someone please help me?
logs
Click to expand...
Click to collapse
Kali Nethunter on redmi 4x (santoni) is updated here:
Releases ยท Neternels/android_kernel_xiaomi_msm8937
Redmi 4X (santoni) NetHunter Kernel. Contribute to Neternels/android_kernel_xiaomi_msm8937 development by creating an account on GitHub.
github.com
Follow it and flash firmwares (if needed).
Hey guys, I bought RM3 few days ago.
I want to root it.
It's the global version. Can anyone please make a video on how to root global version of RM3? PLEASE
Thread is here - https://forum.xda-developers.com/red-magic-3/how-to/red-magic-3-root-guide-t3933148
Texan1 said:
Thread is here - https://forum.xda-developers.com/red-magic-3/how-to/red-magic-3-root-guide-t3933148
Click to expand...
Click to collapse
Can you please make a video?
I'm on global version. Why do I have to install Chinese version?
Saurabh Kash said:
Can you please make a video?
I'm on global version. Why do I have to install Chinese version?
Click to expand...
Click to collapse
Easy setup
Download magisk
Search magisk on google
Sorry can't post links
Download your current global zip file
Extract zip file , copy boot.img and put it into you internal storage phone
Now open magisk and press install, Then batch boot file. Then select your boot.img
A new boot file will be added to your download folder named. Boot_patced.img
Now open you cmd , and flash your new boot_patched.img
And thats it your rooted
em902566 said:
Easy setup
Download magisk
Search magisk on google
Sorry can't post links
Download your current global zip file
Extract zip file , copy boot.img and put it into you internal storage phone
Now open magisk and press install, Then batch boot file. Then select your boot.img
A new boot file will be added to your download folder named. Boot_patced.img
Now open you cmd , and flash your new boot_patched.img
And thats it your rooted
Click to expand...
Click to collapse
I'm new to this kinda stuff and don't wanna mess things up. Can you please make a video?
em902566 said:
Easy setup
Download magisk
Search magisk on google
Sorry can't post links
Download your current global zip file
Extract zip file , copy boot.img and put it into you internal storage phone
Now open magisk and press install, Then batch boot file. Then select your boot.img
A new boot file will be added to your download folder named. Boot_patced.img
Now open you cmd , and flash your new boot_patched.img
And thats it your rooted
Click to expand...
Click to collapse
Please make a video for international Asia version. And I couldn't find link to global rom
em902566 said:
Easy setup
Download magisk
Search magisk on google
Sorry can't post links
Download your current global zip file
Extract zip file , copy boot.img and put it into you internal storage phone
Now open magisk and press install, Then batch boot file. Then select your boot.img
A new boot file will be added to your download folder named. Boot_patced.img
Now open you cmd , and flash your new boot_patched.img
And thats it your rooted
Click to expand...
Click to collapse
And will I still get ota update after root?
Saurabh Kash said:
And will I still get ota update after root?
Click to expand...
Click to collapse
No.
A suggestion: don't. You obviously don't know a lot about rooting and stuff and RM3 is a bit atypical amongst android phones, so it's more risky.
Why do you need root anyway?
Nightpwish said:
No.
A suggestion: don't. You obviously don't know a lot about rooting and stuff and RM3 is a bit atypical amongst android phones, so it's more risky.
Why do you need root anyway?
Click to expand...
Click to collapse
To restore my important backup that I made with titanium and to use theme engines because dark in built theme isn't working on my phone
Saurabh Kash said:
To restore my important backup that I made with titanium and to use theme engines because dark in built theme isn't working on my phone
Click to expand...
Click to collapse
I will say this the above posted is the only way to root global. If an OTA comes out you better not try to update. What you will have to do is BACKUP anything important to you, complete uninstall Magisk and modules, go into fastboot relock the bootloader which will factory reset the phone then update via OTA, re-unlock the bootloader and re-root with the updated boot.img which you will have to download.... Especially important if OTA updates security patch. You have to understand custom ROMs are developed for rooting, stock ROMs are not.... Hence all the trouble.
Hi,
Two things worth mentioning :
- it seems the procedure indicated to rrot does not work with EU v. 1.15 ; I just tried and phone reboots, but with no root
- rooting the phone will not allow OTA. You will get notified of an update, but the update will not apply to the end.
Regards.
Guys I successfully installed HAVOC-OS located https://forum.xda-developers.com/project-treble/trebleenabled-device-development/gsi-havoc-os-t3930030. The steps I followed are mentioned below
1. Wipe everything except internal storage.
2. Flashed BRK3 Vendor https://mega.nz/#F!wFFQUYbI!GZvNOBSn1wVn8U9mQDzBiw!IQsjlYzA
2. Installed Endurance GSI kernel https://forum.xda-developers.com/galaxy-s9/samsung-galaxy-s9--s9-cross-device-development/kernel-endurance-kernel-v1-0-t3849434
3. Flashed the system image for ARM 64 A only
4. Boot system
5. Reboot to recovery and Flashed Mgisk
6. Gapps will fail to install at first. Just goto wipe -> Adv wipe -> system partition -> Resize. Reboot to recovery and flash Gapps
7. Reboot and enjoy
8. You can test other GSI Roms also and report. The thread is located at https://forum.xda-developers.com/project-treble/trebleenabled-device-development
Thanks buddy. I was looking for the ways to run the GSI. And the method works. Good job
thanks for the guide! im still on an unrooted s9, but if everything works ill definetly make the jump. Can you tell us more about stability, bugs and if there are things not working
So after testing the ROM for 2 days I can say that
1. It is very stable and can be used as a daily driver
2. Everything works, I am not sure about Bluetooth audio though, haven't checked it
3. It can be heavily customized. Unlike LOS, where we have only few of these features available
4. Battery life is the best I got using any other ROM out there (check the screens below). and I am the guy who gets 3 hrs of SOT, when others claimed 5+ hrs on the same ROM.
5. Security patch is latest even as compared to the TW ROMs
6. Regarding camera... Its the same as LOS pie. Use gcam by idan 3.5 fixed and you are good to go.
fingerprint working?
andreMusers said:
fingerprint working?
Click to expand...
Click to collapse
Yes it is
Thanks for trying this out. I'm only a few months in with my exynos S9 on android pie, so I haven't yet learned the details about rooting/recovery for this phone.
I'll wait for your next update regarding daily use, and would love a more detailed step-by-step for installation if that's not too much trouble. I'm honestly loving those screenshots.
How about IMEI, BRK3 Vendor safe..?
Ok here is the detailed tutorial on how to install a GSI rom
1. First you need to wipe everything in TWRP. Just like you do, when you clean flash any rom
2. Than install the BRK3 vendor. Link is provided by the OP. It's a flashable zip file so just flash it like any other zip.
3. Flash the Endurance GSI kernel. Link is in the OP.
4. Next, download the GSI rom from the link in the OP. Remember to download the ARM 64 A-only variant.
5. Extract the files and you should get a . Img file. Copy that in the SD card
6. In the TWRP, goto install. Select flash image from the bottom right corner of your screen. Now browse the image file, that you copied and choose system image and install.
7. Boot to the system and than boot back to the recovery.
8. Now flash the magisk
9. If you try to install gapps, it will give an error regarding space. So just goto wipe -> advance wipe > system repartition > resize
After resize, you will be able to install gapps.
Flash gapps, automatic brightness fix ( link in the rom thread), AOD fix ( link in the rom thread) and reboot.
burninitup said:
Ok here is the detailed tutorial on how to install a GSI rom
1. First you need to wipe everything in TWRP. Just like you do, when you clean flash any rom
2. Than install the BRK3 vendor. Link is provided by the OP. It's a flashable zip file so just flash it like any other zip.
3. Flash the Endurance GSI kernel. Link is in the OP.
4. Next, download the GSI rom from the link in the OP. Remember to download the ARM 64 A-only variant.
5. Extract the files and you should get a . Img file. Copy that in the SD card
6. In the TWRP, goto install. Select flash image from the bottom right corner of your screen. Now browse the image file, that you copied and choose system image and install.
7. Boot to the system and than boot back to the recovery.
8. Now flash the magisk
9. If you try to install gapps, it will give an error regarding space. So just goto wipe -> advance wipe > system repartition > resize
After resize, you will be able to install gapps.
Flash gapps, automatic brightness fix ( link in the rom thread), AOD fix ( link in the rom thread) and reboot.
Click to expand...
Click to collapse
Thanks for the extra instruction man, will test this out soon.
burninitup said:
Ok here is the detailed tutorial on how to install a GSI rom
1. First you need to wipe everything in TWRP. Just like you do, when you clean flash any rom
2. Than install the BRK3 vendor. Link is provided by the OP. It's a flashable zip file so just flash it like any other zip.
3. Flash the Endurance GSI kernel. Link is in the OP.
4. Next, download the GSI rom from the link in the OP. Remember to download the ARM 64 A-only variant.
5. Extract the files and you should get a . Img file. Copy that in the SD card
6. In the TWRP, goto install. Select flash image from the bottom right corner of your screen. Now browse the image file, that you copied and choose system image and install.
7. Boot to the system and than boot back to the recovery.
8. Now flash the magisk
9. If you try to install gapps, it will give an error regarding space. So just goto wipe -> advance wipe > system repartition > resize
After resize, you will be able to install gapps.
Flash gapps, automatic brightness fix ( link in the rom thread), AOD fix ( link in the rom thread) and reboot.
Click to expand...
Click to collapse
Doesn't work. Stuck on boot logo, loading forever.
Zwulf said:
Doesn't work. Stuck on boot logo, loading forever.
Click to expand...
Click to collapse
me too dont know any fix
EDIT: Somehow i managed to boot the rom but sim won't get detected
Double tap and AOD - work correctly? On snap it does not work well
My Baseband version is now unknown
I have an SM-G960F and its german
EDIT:I just flashed the latest firmware from soldier and now sim card gets detected
Masterofchicken said:
My Baseband version is now unknown
I have an SM-G960F and its german
EDIT:I just flashed the latest firmware from soldier and now sim card gets detected
Click to expand...
Click to collapse
So camera isn't working ,root is still present with magisk and i couldn't disable it with the adb command so safetynet doesn't pass ,i'll say it's not really usable ?
Has anyone found a fix for getting stuck at the s9 logo?..wanting to move to GSI ROMs
I have tried this,
After flash GSI rom, reboot recovery, reboot system and I have bootloop with the first logo Galaxy S9. Can anybody please help me?
@arunrawat2112
Finally I was able to flash some roms but none of them work properly. Can you please help me?
I have rooted and installed magisk in my note 10 pro and even though I see the update in the settings and can download it. The update doesn't get installed and opens the TWRP recovery which then just fails and restarts without installing the update. Is there any way that I can install the OTA update?
XDA_chron said:
I have rooted and installed magisk in my note 10 pro and even though I see the update in the settings and can download it. The update doesn't get installed and opens the TWRP recovery which then just fails and restarts without installing the update. Is there any way that I can install the OTA update?
Click to expand...
Click to collapse
Previously, updates were downloaded to the / sdcard / downloaded_rom folder (if you look at the path from the phone) in the phone's memory, check in TWRP, if there is no firmware file there, then download the update from the website, load it into the phone's memory or a flashcard and update. After updating, without booting into the system, flash the archive using magisk and then boot into the system.
Dron74 said:
Previously, updates were downloaded to the / sdcard / downloaded_rom folder (if you look at the path from the phone) in the phone's memory, check in TWRP, if there is no firmware file there, then download the update from the website, load it into the phone's memory or a flashcard and update. After updating, without booting into the system, flash the archive using magisk and then boot into the system.
Click to expand...
Click to collapse
Instead of doing all of these things I was thinking of waiting a month or two and installing the pixel experience rom
Hi all,
Thought i'd share a guide on how to get these boot images yourself as well as all the files required, plus the patched boot.img if you just want to go ahead and boot/flash it without obtaining one yourself
Please read the process before committing to proceeding, so you know what's required and what you should and shouldn't use!
Stock and patched images are UK/ EU NE2213 but the guides are universal and could be used on multiple devices.
NOTE:
For these guides the versions used are:
Stable, Canary or BETA depending on firmware, simply change the channel in Magisk settings then select install / update:
NE2213_11_A.12
Magisk Manager v24.3 (24300) Stable
NE2213_11_A.13
Magisk Manager v24.3 (24300) Stable
NE2213_11_A.14
Magisk Manager v25 (25000) Stable this version retains root after a restart, more stable version over previous iterations.
NE2213_11_A.16
Magisk Manager v25.2 (25200) Stable
NE2213_11_C_20
Magisk Manager v25.2 (25200) Stable
NE2213_11_C_21
Magisk Manager v25.2 (25200) Stable
NE2213_13.1.0.520 (EX01)
Magisk Manager v26.1 (25200) Stable
Oxygen OS NE2213_13.1.0.521 (EX01)
Magisk Manager v26.1 Stable
1st
Extracting a boot.img using Fastboot Enhance
Pre-requisites
A device with a working version of magisk manager installed, simply change the channel to the version outlined in the list above relevant to your firmware then select install / update:
A Windows 10 computer / laptop
A full update downloaded firmware zip for your model (recommend oxygen updater)
Payload dumper program for Windows.
An unlocked bootloader.
The local System Update Installer : normal local system update will not allow a reboot during installation, the one I've linked will.
Process
On your computer
1. Download and copy the fastboot enhance folder to your desktop or a location of your choosing.
Download from here: https://github.com/libxzr/FastbootEnhance/releases
2. Download the firmware of your choice (always use full zips, not incremental) and open it using Winrar or a similar zip program, extract the file called payload.bin to a folder of your choosing.
3. Run the program FastbootEnhance.exe, a window will appear, click Payload Dumper, then click browse and point to the payload.bin file, the contents of that payload.bin will now be shown, bare in mind you'll need to check the box "Allow incremental" even if it's a full zip
4. One of the files will be called boot.img, this is the file we'll be patching, click extract then copy this to your phone, root of storage which is called /sdcard.
On your phone
5. Open up Magisk and click Install / Update, if you don't see update then change channel, do this by changing the channel in magisk settings, it'll then show the install/ update buttons.
6. Select "Select and Patch a file" it'll open up a file browser, navigate to the boot.img you copied earlier and select it, allow it to complete (this will output a file called "magisk_patched" which will be output into the Downloads folder)
You now have a patched boot.img ready to boot or flash to either slot with fastboot or boot via fastboot.
I would recommend booting as this is risk free, if it's a bad image for whatever reason and you choose to flash then your phone will bootloop.
NOTE** Some people have noticed that an already patched boot.img when flashed can fail and cause a boot loop when flashed, so if you have downloaded a magisk_patched img from somewhere else then you WILL need to re-patch it on your own device preferably using the afore mentioned magisk manager based on what firmware it's from.
If you intend to follow the guide below with your own patched img then you shouldn't need to patch it twice but it won't hurt if you do.
2nd
Update from XX stable to XX+ stable whilst retaining root
Guide
**NOTE- Although this may work, the system may be unstable, especially when changing bases, eg: Android 11-12 or 12-13, so if you encounter strange behaviour then a factory wipe is advised.
1. Download the relevant firmware for your device via oxygen updater
2. Open Magisk and remove all the modules you have installed, then reboot
**NOTE- At this point I tend to copy out the whole firmware to my computer, incase I need it in the future, the boot img and patched boot img are at the foot of this guide, I'll always upload the latest firmware as soon as it comes out for the UK/EU model
3. Install the OnePlus local install apk listed below in downloads. Click the cog and select "Local Upgrade" the file should be listed on screen, if not then move the file to the root of your phones storage.
4. Click install and allow it to go through the process
**NOTE- DO NOT REBOOT AT THIS POINT YOU WILL LOSE THE ABILITY TO PATCH ON THE FLY, SIMPLY BACK OUT OF THE SCREEN WHICH SAYS "INSTALLATION COMPLETED. RESTART TO EXPERIENCE NEW FEATURES"
5. Open up magisk and click install (you may see two install buttons, top one is magisk and the bottom is magisk manager, we need the top one)
6. You'll be faced with a screen that has several options, you want to select "Install to Inactive slot (After OTA)" then select "LET'S GO" once complete click reboot.
7. Once your phones booted back up your system / files should all remain as they were and you should have root access.
You can now install all your modules again so long as they're compatible with the firmware you've just updated to.
3rd
Rooting using fastboot commands
Method 1
Booting the patched image
1. Obtain a patched boot image for your device variant preferably using payload dumper or download one of mine from the foot of this guide or if you've just performed the above guide you should already have a functional one, copy this file to your fastboot folder on your computer
**NOTE - The above suggested downloads are for the EU / UK variant- if you have another model / firmware please use that instead, If you did not obtain the boot.img from a firmware and patch it yourself, you will need to patch it again in magisk manager to avoid a bootloop, if you still get a bootloop it's best to obtain one yourself using the guide at the top of this post.
2. Reboot your phone to fastboot
and connect to your computer.
3. Boot the magisk patched img
fastboot boot magisk_patched (or name of your patched boot img)
Your phone should now boot automatically, you should now be rooted but we need to make this permanent, if you were to reboot you would lose root.
4. Open magisk manager and click install/update, if you are missing the install/ update buttons, change magisk version to beta in magisk settings and install the update, the buttons should then show.
5. Select Direct install (recommended) then click ok.
6. Allow magisk to permanently root your device then click reboot.
You should now boot and remain rooted.
Method 2
Flashing to both slots
1. Obtain a patched boot img for your device variant or download one of mine from the foot of this guide or if you've just performed the above guide you should already have a functional one, copy this file to your fastboot folder on your computer
**NOTE - Again the above suggested downloads are for the EU/ UK variant- if you have another model / firmware please use that instead, if you did not obtain the boot.img from a firmware and patch it yourself, you will need to patch it again in magisk manager, to avoid a bootloop
2. Reboot your phone to fastboot and connect to your computer.
Command: adb reboot bootloader
3. Open a command prompt on your computer and navigate to your ADB/fastboot folder.
4. Type the following.
fastboot flash boot_a magisk_patched
Press enter.
fastboot flash boot_b magisk_patched
Press enter
fastboot reboot
Press enter
6. Your phone should now boot, open magisk and verify you're rooted.
Troubleshooting
If flashing succeeds but you don't have root and you've followed all the instructions, you may have some magisk modules still active, try performing the following.
1. Connect your phone to your computer.
2. Reboot the phone, then during the boot animation enter this command via ADB.
adb wait-for-device shell magisk --remove-modules
3. Allow to boot, modules will be removed and root should then be active.
If there is no magisk install / update buttons.
1. Make sure you have granted permission to magisk in settings / apps / magisk / permissions
2. Make sure that the update channel is on canary, then force close magisk and then re-open
3. If it still doesn't work then update magisk using canary
4. Last method to check would be to change to the beta channel in magisk settings, then install it.
Or change the update channel, install the version on offer, then change back to canary, install and you should be good to go.
Window's version
Windows 7 will not work with fastboot, please use Windows 10
USB
Use USB 2.0 not 3.0 or 3.1
ADB
These are the files i use for ADB (in the below list) tested these on fresh installs of windows on several windows machines, all win 10
Place them into the root of C so it reads C:\ADB much easier to navigate to that way.
Bootloader unlock
Boot to the bootloader with adb reboot bootloader
type fastboot flashing unlock
Agree to unlock - allow to boot.
If you can't see the device using ADB
Make sure USB Debugging is turned on
Connect your cable to your phone and computer, when asked what you want your phone to do, click on transfer files, a driver will be installed.
After this reconnect your phone and it'll prompt you with a disclaimer with a check box, check the box and click ok, ADB / Fastboot should now work.
Files:
Local System update APK, this must be used as the local OnePlus 10 Pro one will not allow a reboot during the installation, so you cannot install the Magisk boot image during an upgrade, the android 13 local update apk is also required for rolling back to android 12.
Android 13 local update apk
3.27 MB folder on MEGA
mega.nz
Android 12 local update apk
3.27 MB folder on MEGA
mega.nz
ADB Files for Windows 10:
7.69 MB folder on MEGA
5 files
mega.nz
Payload dumper program for Windows-
https://mega.nz/folder/vU00FZDa#PIEfjl5w5wonyNAwHW3FBQ
Oxygen OS NE2213_11_A.12 Stock boot image
0 byte folder on MEGA
mega.nz
Oxygen OS NE2213_11_A.12 Patched boot image
192 MB folder on MEGA
mega.nz
Oxygen OS NE2213_11_A.13 Stock boot image
192 MB folder on MEGA
mega.nz
Oxygen OS NE2213_11_A.13 Patched boot image
192 MB folder on MEGA
mega.nz
Oxygen OS NE2213_11_A.14 Stock boot image
384 MB folder on MEGA
2 files
mega.nz
Oxygen OS NE2213_11_A.14 Patched boot image
192 MB folder on MEGA
mega.nz
Oxygen OS NE2213_11_A.16 Stock boot image
192 MB folder on MEGA
mega.nz
Oxygen OS NE2213_11_A.16 Patched boot image
192 MB folder on MEGA
mega.nz
Android 13
Oxygen OS NE2213_11_C_20 Stock boot image
192 MB folder on MEGA
mega.nz
Oxygen OS NE2213_11_C_20 Patched boot image
192 MB folder on MEGA
mega.nz
Oxygen OS NE2213_11_C_21 Stock boot image https://mega.nz/folder/LNVxTDYA#yly9xpjFjQhe4De_jqyzbw
Oxygen OS NE2213_11_C_21 Patched boot image
192 MB folder on MEGA
mega.nz
Oxygen OS NE2213_13.1.0.520 (EX01) Stock boot image
192 MB folder on MEGA
mega.nz
Oxygen OS NE2213_13.1.0.520 (EX01) Patched boot image
192 MB folder on MEGA
mega.nz
Oxygen OS NE2213_13.1.0.521 (EX01) Stock boot image
192 MB folder on MEGA
mega.nz
Oxygen OS NE2213_13.1.0.521 (EX01) Patched boot image
192 MB folder on MEGA
mega.nz
Glad to see you here bro with the 10 Pro and helpful guide's!!
Cheers
galaxys said:
Glad to see you here bro with the 10 Pro and helpful guide's!!
Cheers
Click to expand...
Click to collapse
Slowly coming around to this phone mate, we desperately need a few custom ROMs..
EvoX on this would be phenomenal.
Nudge nudge @AnierinB
UPDATE: First patched boot image is up, using the latest stable Magisk v24.3 (24300)
dladz said:
Slowly coming around to this phone mate, we desperately need a few custom ROMs..
EvoX on this would be phenomenal.
Nudge nudge @AnierinB
Click to expand...
Click to collapse
Yeh, it's early but hopefully a few Developer's will get this badboy device!
Thank you thank you THAAAANK YOOOOUUUU
meowmeowpewpew said:
Thank you thank you THAAAANK YOOOOUUUU
Click to expand...
Click to collapse
Lol welcome mate
meowmeowpewpew said:
Thank you thank you THAAAANK YOOOOUUUU
Click to expand...
Click to collapse
I honestly hope so..
I'm having a few issues isolating the correct files to make the center clock Magisk mod, but that's in the works. Will have it done soon hopefully.
OnePlus thought it would be a good idea to get rid of OPSystemUI.apk in place of systemui.apk so maybe more in line with stock android. But we'll see
@galaxys as if my prayers were answered, joined the Evo X TG group and there is now a OnePlus 10 group so it's in the works, seriously hope it's AnierinB, he did so well with the 8 pro.
Literally cannot wait
dladz said:
@galaxys as if my prayers were answered, joined the Evo X TG group and there is now a OnePlus 10 group so it's in the works, seriously hope it's AnierinB, he did so well with the 8 pro.
Literally cannot wait
Click to expand...
Click to collapse
Hey that's great news and something to definitely look forward to!
Cheers
Very happy to see guides! Nice, thank you so much !
dladz said:
@galaxys as if my prayers were answered, joined the Evo X TG group and there is now a OnePlus 10 group so it's in the works, seriously hope it's AnierinB, he did so well with the 8 pro.
Literally cannot wait
Click to expand...
Click to collapse
I cannot find that Evo X 10 Pro channel, have you got a link?
kouzelnik3 said:
I cannot find that Evo X 10 Pro channel, have you got a link?
Click to expand...
Click to collapse
If you have telegram just search for evo x up the top, you'll see the main channel.
The the other is in that, i'm just in the middle of something, i'll send it once i'm done.
kouzelnik3 said:
I cannot find that Evo X 10 Pro channel, have you got a link?
Click to expand...
Click to collapse
Evolution X - OnePlus 10 Series
Telegram: Contact @EvolutionXOnePlus10
t.me
Macke93 said:
Evolution X - OnePlus 10 Series
Telegram: Contact @EvolutionXOnePlus10
t.me
Click to expand...
Click to collapse
Oh I've found it.
Hello All,
Very many thanks for your guide. It really helped me root my OP 10 PRO
I was wondering if it is possible to flash my OP ColorOS with OxygenOS EU/UK version you have uploaded?
I copied the 02b0d1b2508744e3a41115aeb274cccf.zip to the root folder and I tried installing via Oxygen Updater using the automatic method, but it fails every time.
If I try installing it manually, I have to download the Oxygen Updater via oxygenos.oneplus.net/OPLocalUpdate_For_Android12.apk.zip and rename to .apk. - I then launch System Update , click on settings and it says 'Move installation package into root directory' (which it is).
Have I missed a step?
kouzelnik3 said:
Oh I've found it.
Click to expand...
Click to collapse
Ah was just about to post it mate.
Glad you found it, it's only new but that fact that it's here is brilliant . I'm hoping AnierinB is the dev who makes the rom for the 10.
Lynxy0 said:
Hello All,
Very many thanks for your guide. It really helped me root my OP 10 PRO
I was wondering if it is possible to flash my OP ColorOS with OxygenOS EU/UK version you have uploaded?
I copied the 02b0d1b2508744e3a41115aeb274cccf.zip to the root folder and I tried installing via Oxygen Updater using the automatic method, but it fails every time.
If I try installing it manually, I have to download the Oxygen Updater via oxygenos.oneplus.net/OPLocalUpdate_For_Android12.apk.zip and rename to .apk. - I then launch System Update , click on settings and it says 'Move installation package into root directory' (which it is).
Have I missed a step?
Click to expand...
Click to collapse
Honestly mate i'm not sure, you're essentially changing region.
Have you looked into fastboot enhanced?
You can obtain the firmware from oxygen updater (it's 4.15GB the one i uploaded is only the boot image and patched boot image)
Then copy it to your computer and allow it to flash to your phone.
This isn't without risk mate and i've not done this before myself.
dladz said:
Ah was just about to post it mate.
Glad you found it, it's only new but that fact that it's here is brilliant . I'm hoping AnierinB is the dev who makes the rom for the 10.
Click to expand...
Click to collapse
I am hoping too, because in this state oxygen os in this device is bad. Yeah, it is quite new, but hey, it is halfly baked. And not only evo x, but other ROMs I hope will come.
dladz said:
Honestly mate i'm not sure, you're essentially changing region.
Have you looked into fastboot enhanced?
You can obtain the firmware from oxygen updater (it's 4.15GB the one i uploaded is only the boot image and patched boot image)
Then copy it to your computer and allow it to flash to your phone.
This isn't without risk mate and i've not done this before myself.
Click to expand...
Click to collapse
Thanks for your swift reply. I will wait until there is a verified method. For now, I will tread lightly with the rooted version hehe