Related
After flashing a stock Global ROM on my Mi9, gyroscope, ambient light and accelerator stopped working.
Looks like persist partition is bad.
Followed steps to flash the partition using Mi Flash Tool in EDL mode, but I get this "Unauthorized for this operation"
https://imgur.com/dp9iUhX
My computer is bound to my account, but I don't have the rights to perform this operation
Is that something I should request?
Any advice how to pass this or other ways to fix the sensors?
Thanks
More details
https://imgur.com/qSOei4O
Sorry cant insert images
https://forum.xda-developers.com/Mi-9/help/sensors-install-global-stable-t3963626
And more related info that may you read
https://forum.xda-developers.com/Mi-9/help/widevine-l3-stock-rom-t3959063
rocalino said:
https://forum.xda-developers.com/Mi-9/help/sensors-install-global-stable-t3963626
And more related info that may you read
https://forum.xda-developers.com/Mi-9/help/widevine-l3-stock-rom-t3959063
Click to expand...
Click to collapse
Hey buddy! How you're doing?
OP : everything is listed in those two threads, you can flash a Chinese TWRP which allows modifications to the persist partition but it actually breaks the Widevine L1 certification if it matters to you
Thank you so much for the reply
rocalino said:
https://forum.xda-developers.com/Mi-9/help/sensors-install-global-stable-t3963626
And more related info that may you read
https://forum.xda-developers.com/Mi-9/help/widevine-l3-stock-rom-t3959063
Click to expand...
Click to collapse
I am reading the posts now
I hope it will work
_Nexus8_ said:
Hey buddy! How you're doing?
OP : everything is listed in those two threads, you can flash a Chinese TWRP which allows modifications to the persist partition but it actually breaks the Widevine L1 certification if it matters to you
Click to expand...
Click to collapse
Hi,
Apologies for late reply
I am just reading your message now
I thought the app will send me notification
Anyway, I just checked Widevine using DRM info app and found it to be 3 ???!!!
Looks like I have nothing to lose
Flashed using the Chinese TWRP and sensors work now
Thanks a lot
momello said:
Hi,
Apologies for late reply
I am just reading your message now
I thought the app will send me notification
Anyway, I just checked Widevine using DRM info app and found it to be 3 ???!!!
Looks like I have nothing to lose
Click to expand...
Click to collapse
It's okay, take your time!
Well, I think you already flashed a ROM right? If yes it may be the cause of Widevine passing L3
Before flashing the ROM, you were on an EEA ROM right?
I am L3 before doing any thing
What I did to the phone is:
Originally was on EEA
Flashed EU rom
Then global stable
Then sensors busted
I tried many times to flash with Flash Tool but couldn't
Never checked DRM before
It was L3 before TWRP the persist partion
momello said:
I am L3 before doing any thing
What I did to the phone is:
Originally was on EEA
Flashed EU rom
Then global stable
Then sensors busted
I tried many times to flash with Flash Tool but couldn't
Never checked DRM before
It was L3 before TWRP the persist partion
Click to expand...
Click to collapse
I think it was L1 before you flash the EU ROM, EEA versions come with L1 enabled by default
I got L3 because of the persistence. Can L1 with EDL?
1. Do we lose L1 certification after flashing custom roms? Do we recover status back with persist image?
2. Are we able to use all the Indian banking apps? Since GPay is a pain in ass to make it work with root/custom ROMs
Getting back to android modding community after approximately 3 years, though have been following threads.
Any inputs on the above would be really appreciated. Thanks in advance.
No.
Yes
venu44 said:
No.
Yes
Click to expand...
Click to collapse
I mean is the No part for the persist image or the status of L1.
Satzz said:
I mean is the No part for the persist image or the status of L1.
Click to expand...
Click to collapse
For some custom ROMs you need to wipe Persist to get some sensors to work and you loose then L1.
When going back to MIUI you can restore Persist and L1
I wanted to switch from MIUI Global 12.0.1 Stable to the Indian version V12.0.2.0 to have the default call recorder,
through the file raphaelin_in_global_images_V12.0.2.0.QFKINXM_20200710… tgz
after expanding it, using XiaoMiFlash latest version.
But after pressing the Flash key the message “error: Missmatching image and device” appears.
What can I do to install the Indian version?
Thank you for your help.
nigol
Satzz said:
1. Do we lose L1 certification after flashing custom roms? Do we recover status back with persist image?
2. Are we able to use all the Indian banking apps? Since GPay is a pain in ass to make it work with root/custom ROMs
Getting back to android modding community after approximately 3 years, though have been following threads.
Any inputs on the above would be really appreciated. Thanks in advance.
Click to expand...
Click to collapse
I bought a k20 pro (raphealin) like a month ago I think, got it with miui 11, updated to miui 12 12.0.2.0, got bored looked up the EU version, unlocked bootloader, installed orange fox r11 (or whichever version is the latest that just came out I don't remember), took a backup of persist along with everything (cuz I read somewhere that I could lose L1 and having a backup of persist might help so I took backup), flashed the EU rom 12.0.3.0, flashed magisk (didn't plan on flashing it, but then when I was flashing the rom, I thought might as well no downside, voiding the warranty anyway), have been using it for 2 weeks I guess now, its been working great, renamed the magisk manager to something else, used magisk hide on other apps. I didn't loose L1 and can see FHD in Netflix and best in PrimeVideos, High in Disney+, banking apps work fine (iMobile, PayTM, Gpay (Indian version / used to be called tez I think before), BOB apps also (although they aren't working but I think that's BOB's fault as I am not getting OTP, checked on other phones too, not receiving there too, but they are opening no rooted error or anything), Digilocker too (this won't work with just magisk hide, you will need to rename magisk manager and after a reboot it works, I would you rename it anyway cuz there is no downside, cuz otherwise if you wanna use this then you will need to later so), ETMoney, Groww PhonePe, MyCAMS, PAYPAL these all work fine, I don't know any other apps I don't use them). Even though I didn't lose L1 after flashing I have kept the backup in case in future I need it.
Hiya. So, here's the story:
Xiaomi Mi 9T Pro EEA, bought from Amazon, not a shady reseller
I made a Google Backup of my apps, because I decided to try out some Android 11 roms.
After trying them out, I wanted to go back to Android 10, so I clean flashed my rom, GApps and disable force encrypt, the usual stuff. But the Google Backup, that I previously used on all the A11 roms was suddenly gone.
I thought, that wouldn't be a problem, since I still had my Android 10 TWRP Backup that I made, before I started experimenting with A11.
I restored that backup and couldn't unlock my phone. So I deleted /data/system/locksettings.db and finally my phone would unlock.
But: My sensors didn't work anymore. I searched the internet for info and found out, that my persist partition got corrupted.
tl; dr: I restored a TWRP backup and my Persist partition corrupted.
Until yesterday, I didn't even know, what the Persist partition was. I never touched it.
I know how to get my sensors working again. But I guess my Widevine L1 is gone now, isn't it?
Seki_ said:
Hiya. So, here's the story:
Xiaomi Mi 9T Pro EEA, bought from Amazon, not a shady reseller
I made a Google Backup of my apps, because I decided to try out some Android 11 roms.
After trying them out, I wanted to go back to Android 10, so I clean flashed my rom, GApps and disable force encrypt, the usual stuff. But the Google Backup, that I previously used on all the A11 roms was suddenly gone.
I thought, that wouldn't be a problem, since I still had my Android 10 TWRP Backup that I made, before I started experimenting with A11.
I restored that backup and couldn't unlock my phone. So I deleted /data/system/locksettings.db and finally my phone would unlock.
But: My sensors didn't work anymore. I searched the internet for info and found out, that my persist partition got corrupted.
tl; dr: I restored a TWRP backup and my Persist partition corrupted.
Until yesterday, I didn't even know, what the Persist partition was. I never touched it.
I know how to get my sensors working again. But I guess my Widevine L1 is gone now, isn't it?
Click to expand...
Click to collapse
Yes, it's gone. Share what you did to get the sensors working.
mauam said:
Yes, it's gone. Share what you did to get the sensors working.
Click to expand...
Click to collapse
Unfortunate. Oh well.
There's actually multiple ways. You could:
Flash persist from Xiaomi's full fastboot package
Flash persistbak to persist
Flash a working persist image from another Mi 9T Pro
All those things worked for me. In the end, I settled with the persistbak method.
Seki_ said:
Unfortunate. Oh well.
There's actually multiple ways. You could:
Flash persist from Xiaomi's full fastboot package
Flash persistbak to persist
Flash a working persist image from another Mi 9T Pro
All those things worked for me. In the end, I settled with the persistbak method.
Click to expand...
Click to collapse
could you tell me how you flashed and dumped persistbak?
wavychris said:
could you tell me how you flashed and dumped persistbak?
Click to expand...
Click to collapse
It's almost been a year, so I don't fully remember what I did exactly, but there's some tutorials around you can find pretty easily.
The only thing I remember is going into fastboot and dumping and flashing my partitions via command line, I think.
Seki_ said:
It's almost been a year, so I don't fully remember what I did exactly, but there's some tutorials around you can find pretty easily.
The only thing I remember is going into fastboot and dumping and flashing my partitions via command line, I think.
Click to expand...
Click to collapse
ive been searching for a month and im still not sure which tutorial to follow, all i want is to fix my sensors and get widevine l1 back in case it gets void when i flash persist, any help would be phenomenal!
wavychris said:
ive been searching for a month and im still not sure which tutorial to follow, all i want is to fix my sensors and get widevine l1 back in case it gets void when i flash persist, any help would be phenomenal!
Click to expand...
Click to collapse
Well if you didn't make a backup before, L1 is L Gone. I didn't get it back. Following any tutorial should get you your sensors back though.
And remember: The first thing to do when getting a new phone is to backup that persist partition, so you don't need to worry about something like this happening again.
Seki_ said:
Well if you didn't make a backup before, L1 is L Gone. I didn't get it back. Following any tutorial should get you your sensors back though.
And remember: The first thing to do when getting a new phone is to backup that persist partition, so you don't need to worry about something like this happening again.
Click to expand...
Click to collapse
if i remember correctly you can get widevine l1 back via a magisk module or flashing xiaomi.eu rom and you can download the certificate from there, try it out if you dont got nothing to lose, by the way, if i flash persist will the sensors work permanently or do i have to do this again every once in a while?
wavychris said:
if i remember correctly you can get widevine l1 back via a magisk module or flashing xiaomi.eu rom and you can download the certificate from there, try it out if you dont got nothing to lose, by the way, if i flash persist will the sensors work permanently or do i have to do this again every once in a while?
Click to expand...
Click to collapse
Oh, interesting. Definitely gotta try that, thanks. How do you download the certificate in MIUI? Does it happen automatically?
Since I flashed my persistbak, I didn't flash anything else and my sensors are still working, so I guess it sporadically happens... sometimes?
Btw, if you aren't already, you should use OrangeFox recovery instead of TWRP on Xiaomi devices. It usually doesn't kill itself by wiping partitions or flashing roms, especially when coming from MIUI. Also, you can make persist backups with it. For some reason they removed that feature from TWRP.
Seki_ said:
Oh, interesting. Definitely gotta try that, thanks. How do you download the certificate in MIUI? Does it happen automatically?
Since I flashed my persistbak, I didn't flash anything else and my sensors are still working, so I guess it sporadically happens... sometimes?
Btw, if you aren't already, you should use OrangeFox recovery instead of TWRP on Xiaomi devices. It usually doesn't kill itself by wiping partitions or flashing roms, especially when coming from MIUI. Also, you can make persist backups with it. For some reason they removed that feature from TWRP.
Click to expand...
Click to collapse
in case you got it wrong xiaomi.eu is a custom miui based rom, not official, just to clarify that, and to download the certificate you must enroll fingerprint then go to fingerprint payments and youll find widevine l1 there, then click on certificate in widevine l1, pretty easy stuff, also how do i install orangefox?
wavychris said:
in case you got it wrong xiaomi.eu is a custom miui based rom, not official, just to clarify that, and to download the certificate you must enroll fingerprint then go to fingerprint payments and youll find widevine l1 there, then click on certificate in widevine l1, pretty easy stuff, also how do i install orangefox?
Click to expand...
Click to collapse
Oh, I can't read. For some reason, I thought you said xiaomi.eu or stock, that's why I said MIUI. Anyway, thanks for telling me. I never heard of that.
To install OrangeFox, just download the zip, make backups if you want to be extra sure and flash the zip. Here's the thread: https://forum.xda-developers.com/t/recovery-official-orangefox-recovery-project-r11-1.4308019/
The UI is different, so it took me a little while to get used to it, but ultimately, OrangeFox is a smoother experience than TWRP, at least on Xiaomi.
wavychris said:
if i remember correctly you can get widevine l1 back via a magisk module or flashing xiaomi.eu rom and you can download the certificate from there, try it out if you dont got nothing to lose, by the way, if i flash persist will the sensors work permanently or do i have to do this again every once in a while?
Click to expand...
Click to collapse
No, you cannot get L1 through Magisk module - because you need a (paid) certificate for your hardware
To the contrary, there is a Magisk module that disables L1, dropping you to default L3.
Although I never understood who/why needs that
wavychris said:
could you tell me how you flashed and dumped persistbak?
Click to expand...
Click to collapse
See here how to backup and/or dump Persist and restore/flash it back.
Of course, if you didn't backup a working Persist on time, you have nothing to restore:
Extracting stock Boot, Recovery and Persist images
Talking here about how to extract the stock Boot, Recovery and Persist images, needed in case of e.g. bootloop upon flashing Magisk or TWRP, to reflash the stock image(s). Also, boot image is needed for patching from Magisk Manager (and flashing...
forum.xda-developers.com
Seki_ said:
Oh, I can't read. For some reason, I thought you said xiaomi.eu or stock, that's why I said MIUI. Anyway, thanks for telling me. I never heard of that.
To install OrangeFox, just download the zip, make backups if you want to be extra sure and flash the zip. Here's the thread: https://forum.xda-developers.com/t/recovery-official-orangefox-recovery-project-r11-1.4308019/
The UI is different, so it took me a little while to get used to it, but ultimately, OrangeFox is a smoother experience than TWRP, at least on Xiaomi.
Click to expand...
Click to collapse
its alright lol, thanks for your help btw have a nice day/night
zgfg said:
No, you cannot get L1 through Magisk module - because you need a (paid) certificate for your hardware
To the contrary, there is a Magisk module that disables L1, dropping you to default L3.
Although I never understood who/why needs that
Click to expand...
Click to collapse
that sucks man, thanks for the news anyway i might use xiaomi.eu rom to get it back that way at least
zgfg said:
See here how to backup and/or dump Persist and restore/flash it back.
Of course, if you didn't backup a working Persist on time, you have nothing to restore:
Extracting stock Boot, Recovery and Persist images
Talking here about how to extract the stock Boot, Recovery and Persist images, needed in case of e.g. bootloop upon flashing Magisk or TWRP, to reflash the stock image(s). Also, boot image is needed for patching from Magisk Manager (and flashing...
forum.xda-developers.com
Click to expand...
Click to collapse
alright thanks i might try it out tommorow ill update you on the process if you want
Hello. Could someone provide step by step tutorial onhow to root xiaomi 11 running latest xiaomi EU ROM?
I have found one tutorial but it is not very clear. I would not like to brick my device. If someone could help mi to install magisk I would appreciate.
I have managed to patch boot.img
But which command to use it to flash it since this is A/B partition device.
Photo attached of patched boot.img
Could someone tell me what commands to use to flash it?
Thank you
i do this (boot.img is file boot patched which is renamed) :
fastboot flash boot_a boot.img
fastboot flash boot_b boot.img
Im a nooooooob
rafik25 said:
i do this (boot.img is file boot patched which is renamed) :
fastboot flash boot_a boot.img
fastboot flash boot_b boot.img
Im a nooooooob
Click to expand...
Click to collapse
Since you announced that you're on global rom, did you magisk root the global rom?
And if you did, does the safetynet pass now?
Thanks.
piskr said:
Since you announced that you're on global rom, did you magisk root the global rom?
And if you did, does the safetynet pass now?
Thanks.
Click to expand...
Click to collapse
Hey, I'm using the Chinese version but flashed the Xiaomi.EU ROM.
I didn't pass the SafetyNet check after rooting yesterday, so I re-flashed everything and then re-patched my boot.img with Magisk and flashed that again, and now the SafetyNet check passes. I can even find Netflix on the Play Store.
Rooting the Mi 11 with the latest Xiaomi.eu ROM
EDIT: This is not for the TWRP version. I will update this thread soon! Hello! Since I saw a lot of people asking, I decided to post how to root a Mi 11 (as of 2021-02-11). Install the Xiaomi.eu ROM. You can find more details in this post...
forum.xda-developers.com
Lucavon said:
Hey, I'm using the Chinese version but flashed the Xiaomi.EU ROM.
I didn't pass the SafetyNet check after rooting yesterday, so I re-flashed everything and then re-patched my boot.img with Magisk and flashed that again, and now the SafetyNet check passes. I can even find Netflix on the Play Store.
Click to expand...
Click to collapse
Thank you, I'm on eu too and I like this rom a lot. I really appreciate the hard work and the success of the devs. What still bother me is massive energy consumption and slow and faulty fingerprint response. Those issues looks like minor, but in fact they are quite essential.
Therefore I'm looking for other solution for now and therefore the global rom caught my eye. Someone claimed that the global better handles battery.
So far I learned that flashing the global disables Google pay. I'm wondering if magisk is a solution.
piskr said:
Thank you, I'm on eu too and I like this rom a lot. I really appreciate the hard work and the success of the devs. What still bother me is massive energy consumption and slow and faulty fingerprint response. Those issues looks like minor, but in fact they are quite essential.
Therefore I'm looking for other solution for now and therefore the global rom caught my eye. Someone claimed that the global better handles battery.
So far I learned that flashing the global disables Google pay. I'm wondering if magisk is a solution.
Click to expand...
Click to collapse
I've noticed that the xiaomi.eu ROM seems to slightly improve battery life, not by much, but at least a little.
piskr said:
Since you announced that you're on global rom, did you magisk root the global rom?
And if you did, does the safetynet pass now?
Thanks.
Click to expand...
Click to collapse
safetynet pass failed....
robkor said:
OK. It is solved now. I have managed to root my xiaomi 11
Click to expand...
Click to collapse
How to pass safetynet to enable GPay. I am on Global Rom flashed from CN version Mi 11. Thanks
kelhossiny said:
How to pass safetynet to enable GPay. I am on Global Rom flashed from CN version Mi 11. Thanks
Click to expand...
Click to collapse
Install magisk 22, patch and install a+b pacthed boot.img, clear data of GP, GPS and GSF and then install fix with magisk: https://github.com/kdrag0n/safetynet-fix/releases
But I wouldn't recommend global. It's far worse than original CN. And some users complain that you lose 5g doing that.
piskr said:
Install magisk 22, patch and install a+b pacthed boot.img, clear data of GP, GPS and GSF and then install fix with magisk: https://github.com/kdrag0n/safetynet-fix/releases
But I wouldn't recommend global. It's far worse than original CN. And some users complain that you lose 5g doing that.
Click to expand...
Click to collapse
how about EEA Rom? is it has the same problem of safetynet or GPay is working normally.
kelhossiny said:
how about EEA Rom? is it has the same problem of safetynet or GPay is working normally.
Click to expand...
Click to collapse
Flashing it over cn demands the same procedure. If you seek straight solution, go for eu.
Which custom rom is best for redmi note 8 in ANDROID 11
Opinions are different from person to person. You should do a research on this subject then choose anything to your taste. Easier this way than asking someone. In this way you'll gain knowledge and you'll be able to provide tips and advises to others.
Anyway, you should stay away from the latest update to A11 from Xiaomi!!! The official update is garbage!!! I regret so much doing this step... lost some useful and basic functions. Looks like their devs are stupid really... or just hate their customers.
Just try whatever you thing is ok for you.
MadK9 said:
Opinions are different from person to person. You should do a research on this subject then choose anything to your taste. Easier this way than asking someone. In this way you'll gain knowledge and you'll be able to provide tips and advises to others.
Anyway, you should stay away from the latest update to A11 from Xiaomi!!! The official update is garbage!!! I regret so much doing this step... lost some useful and basic functions. Looks like their devs are stupid really... or just hate their customers.
Just try whatever you thing is ok for you.
Click to expand...
Click to collapse
You are absolutely right. Android 11 update is like a diseaster
rafat.mym said:
You are absolutely right. Android 11 update is like a diseaster
Click to expand...
Click to collapse
whats the problem? mine works fine and much faster
jjsan said:
whats the problem? mine works fine and much faster
Click to expand...
Click to collapse
There must be something that makes your device smooth... maybe rom variant? Locked bootloader??
Share us more details please.
MadK9 said:
There must be something that makes your device smooth... maybe rom variant? Locked bootloader??
Share us more details please.
Click to expand...
Click to collapse
Unlocked bootlader, rooted (magisk for payment and adaway)
Rom variant is
Miui 12.0.2 RCXEUXM
Full wipe after upading to 11
Thanx.
Well, I also have an unlocked bootloader, but no Magisk and EEA Rom... but did not tried factory reset after update.
I also tried to flash Magisk but had issues with bootloop when I patched boot image and I gave up...
MadK9 said:
Thanx.
Well, I also have an unlocked bootloader, but no Magisk and EEA Rom... but did not tried factory reset after update.
I also tried to flash Magisk but had issues with bootloop when I patched boot image and I gave up...
Click to expand...
Click to collapse
ive installed magisk via twrp (renaming .apk to .zip and flashing)
i've read many posts about wiping data after upgrade
jjsan said:
Unlocked bootlader, rooted (magisk for payment and adaway)
Rom variant is
Miui 12.0.2 RCXEUXM
Full wipe after upading to 11
Click to expand...
Click to collapse
My firend, how did you fix the payment (with magisk)?
Jendrooo said:
My firend, how did you fix the payment (with magisk)?
Click to expand...
Click to collapse
5 days ago something happened and its not working for now. waiting for solution. you can search for cts profile here in forum.
Jendrooo said:
My firend, how did you fix the payment (with magisk)?
Click to expand...
Click to collapse
Android Repository
MagiskHide Props Config v6.0.2-v132 (72) ⚡Magisk Module ⚡Change your device's fingerprint, to pass SafetyNet's CTS Profile check. Set/reset MagiskHide sensitive prop values. Change any prop values easily, and set your own custom props. ⚡️GitHub Repository ⚙Changelog: - Fix problems when trying...
t.me
Remember : A11 sux !
loopypalm said:
Android Repository
MagiskHide Props Config v6.0.2-v132 (72) ⚡Magisk Module ⚡Change your device's fingerprint, to pass SafetyNet's CTS Profile check. Set/reset MagiskHide sensitive prop values. Change any prop values easily, and set your own custom props. ⚡️GitHub Repository ⚙Changelog: - Fix problems when trying...
t.me
Remember : A11 sux !
Click to expand...
Click to collapse
1. In your opinion it is better to install V12.0.4.0 with android 10 or stay on V12.0.2.0 with android 11?
2. After installing MagiskHide Props Config v6.0.2-v132 (72), will I have trouble adding a credit card to gpay? (on android 11)?
Jendrooo said:
1. In your opinion it is better to install V12.0.4.0 with android 10 or stay on V12.0.2.0 with android 11?
2. After installing MagiskHide Props Config v6.0.2-v132 (72), will I have trouble adding a credit card to gpay? (on android 11)?
Click to expand...
Click to collapse
payment is not possible even on android 10 now.
i like 11 more than 10
Jendrooo said:
1. In your opinion it is better to install V12.0.4.0 with android 10 or stay on V12.0.2.0 with android 11?
2. After installing MagiskHide Props Config v6.0.2-v132 (72), will I have trouble adding a credit card to gpay? (on android 11)?
Click to expand...
Click to collapse
1-none , -----> custom rom
2-IDK about payment things
jjsan said:
ive installed magisk via twrp (renaming .apk to .zip and flashing)
i've read many posts about wiping data after upgrade
Click to expand...
Click to collapse
Managed to install Magisk again (older version...), gain root and activated OTA survival on OrangeFox Recovery. So far, no issues but still afraid to try A11 again...
MadK9 said:
Managed to install Magisk again (older version...), gain root and activated OTA survival on OrangeFox Recovery. So far, no issues but still afraid to try A11 again...
Click to expand...
Click to collapse
what were your problems?
best thing for me is setting phone to airplane mode and it lets bt on if was connected before.
and really nice and smooth system
Well, there were several bugs on my device which I was unable to sort them out and decided to go back to 12.0.4.0...
Most annoying one was the impossibility to share a file from file manager by swiping up to a file... A message came on screen telling me there is no app to handle the action on my personal profile or something like that... Whaaat?
Another bug was the 3 fingers screenshot option... Not there... Just not working... Or dynamic icons... This function also was not available anymore...
I had no patience digging for bugs, was pissed and flash the goddamn device with the previous working version of android... Was so angry that I forgot to back up my data and lost all my personal files!!!
But of course, I did not factory reset my device after A11 update... This move, should not exist!!! Why this option is never applied on iphones??? Of course they're not perfect but update after update and never, ever had issues with the device and never had to factory reset it after a major update.... Jesus Christ, this android....
well. i understand that.
3 fingers screenshot can be activated from notifications.
funny thing is possibility to activate new notification centre. its not there. unless you look for it in search. funny thing - your phone has to be in english
i was android developer for 3 years and I like this system just because these possibilities.
im rooted. i can edit hosts file and make adblock perfect and simple.
but for normal people just for using phone there is iPhone. its simple and working.
or also samsung devices are quite good but pricey
About 3 fingers screenshoot: The option was enabled in my device, so even if it was active, the function did not worked!
start camera from lock screen was moved to double volume up but also not working. ist still beta