Related
Hi guys!
Just installed Android P (MIUI 10 9.1.24) on my phone. I used MiFlash method, so the previous twrp got replaced with stock recovery. So I downloaded the latest twrp for mi 8 se, version TWRP-3.2.3-1227. Now whenever I try to boot into this, TWRP gets stuck at the splash screen & nothing else happens. Am I doing something wrong? Any help?
Well, just solved this issue. It is caused by that infamous encryption issue. Basically you have to decrypt your phone before flashing TWRP.
I followed this tutorial: https://forum.xda-developers.com/nexus-6p/general/fix-twrp-hangs-splash-screen-android-t3438262
evanB70 said:
Well, just solved this issue. It is caused by that infamous encryption issue. Basically you have to decrypt your phone before flashing TWRP.
I followed this tutorial: https://forum.xda-developers.com/nexus-6p/general/fix-twrp-hangs-splash-screen-android-t3438262
Click to expand...
Click to collapse
Hello there... I am having the same issue... can you explain a little bit more, how do i know the boot image i need to flash.
regards.
j0an said:
Hello there... I am having the same issue... can you explain a little bit more, how do i know the boot image i need to flash.
regards.
Click to expand...
Click to collapse
I flashed may be 5 times ( for different tests) 9.2.15 dev version from here and TWRP 1227 was working and sticking at every trial without need to deencrypt.
https://xiaomifirmware.com/roms/download-official-miui-roms-for-xiaomi-mi-8-se/
In my view this issue is more related to the rom version 9.1.24 I didn't tested.
Anyway thanks OP for reporting.
evanB70 said:
Well, just solved this issue. It is caused by that infamous encryption issue. Basically you have to decrypt your phone before flashing TWRP.
I followed this tutorial: https://forum.xda-developers.com/nexus-6p/general/fix-twrp-hangs-splash-screen-android-t3438262
Click to expand...
Click to collapse
I would like to apologize for statement given in my last post.
I want to make things corrected and thank you for the light you gave me.
Sure it is related to bad deencryption because with 9.2.15 official rom was possible to install TWRP but we were several unable to boot any other rom after installation. We were rejected to fastboot screen at every trials. We found solution by flashing older official rom version.
Good night friend
I have Mi 8 SE that has been installed TWRP LR. TEAM 3.3.0 and runs well, in normal use suddenly stuck, and I immediately restarted my Mi 8 SE, and only entered fastboot and stuck mode, I tried to enter TWRP mode and even then just stuck on the TWRP logo, and when I flash again the method cannot because my Mi 8 SE has no USB Debuging, and only the CMD notification appears "FAILED (remote: Check device console.)",
help me to be able to fix my Mi 8 SE ,,
Thank you so much for your help
reky2426 said:
Good night friend
I have Mi 8 SE that has been installed TWRP LR. TEAM 3.3.0 and runs well, in normal use suddenly stuck, and I immediately restarted my Mi 8 SE, and only entered fastboot and stuck mode, I tried to enter TWRP mode and even then just stuck on the TWRP logo, and when I flash again the method cannot because my Mi 8 SE has no USB Debuging, and only the CMD notification appears "FAILED (remote: Check device console.)",
help me to be able to fix my Mi 8 SE ,,
Thank you so much for your help
Click to expand...
Click to collapse
Not clear enough your explanation!
"flash again" What is it?
Do you access fastboot and access on your computer?
if yes, you must flash a fastboot rom via miflash in order to reset the phone.
The situation is that I just bought the K20 Pro. Then i unlock and flash by miflash with Global Rom via this thread then the device has bricked and has the message "This MIUI version can't be installed on this device".
Tried boot into recovery but the TWRP has gone and the bootloader has been locked.
Flash back to China Rom by miflash is doesn't work either, help me please, i don't know what to do now, i tried every thing i can.
:crying::crying:
P/s: Sorry for my bad English.
dsown said:
The situation is that I just bought the K20 Pro. Then i unlock and flash by miflash with Global Rom via this thread then the device has bricked and has the message "This MIUI version can't be installed on this device".
Tried boot into recovery but the TWRP has gone and the bootloader has been locked.
Flash back to China Rom by miflash is doesn't work either, help me please, i don't know what to do now, i tried every thing i can.
:crying::crying:
P/s: Sorry for my bad English.
Click to expand...
Click to collapse
just calm down and try to unlock bootloader again by (miflash_unlock) then install in computer (adb-setup-1.4.3) then keep press on power and volume down button for fastboat then open miflash (version=2017.4.25.0) and connect your phone and press refresh to see your phone on list then download India Stable Firmwares version in same thread you mention and unzip the file and unzip the result file then you will see 12 file (images/ flash_all.bat .....) and in miflash choose the file and press flash and wait... when its done your phone will work but will give account is locked just connect with wifi and write your micloud password and done .
dsown said:
The situation is that I just bought the K20 Pro. Then i unlock and flash by miflash with Global Rom via this thread then the device has bricked and has the message "This MIUI version can't be installed on this device".
Tried boot into recovery but the TWRP has gone and the bootloader has been locked.
Flash back to China Rom by miflash is doesn't work either, help me please, i don't know what to do now, i tried every thing i can.
:crying::crying:
P/s: Sorry for my bad English.
Click to expand...
Click to collapse
Miflash only works on an unlocked bootloader. It appears that you have a Chinese Model and you just did what was supposed to be avoided. You should get accustomed to Miflash moving forward. Never use Flash_All_Lock while cross flashing China/Global roms. You'll have to wait to unlock your Bootloader now and post that flash the China rom to get back. If any time you wish to move to the India rom, either use a twrp recovery or just use Flash_All while using the fastboot image which should eventually avoid locking the bootloader
Sent from my Redmi K20 Pro using Tapatalk
dsown said:
The situation is that I just bought the K20 Pro. Then i unlock and flash by miflash with Global Rom via this thread then the device has bricked and has the message "This MIUI version can't be installed on this device".
Tried boot into recovery but the TWRP has gone and the bootloader has been locked.
Flash back to China Rom by miflash is doesn't work either, help me please, i don't know what to do now, i tried every thing i can.
:crying::crying:
P/s: Sorry for my bad English.
Click to expand...
Click to collapse
1. if you can still enter fastboot mode, there is a possibility that you can do TWRP flashing again (the TWRP version must be correct so that the data on the cellphone can be read properly) / Flashing from the PC (if you are lucky, the flashing will work properly without any problem or you can bypass the bootloader locked using software or something else). [make sure ROM version must be appropriate because this is very crucial]
2. You can try using the test point method (EDL / Emergency Download Mode) [This method is usually used if your K20Pro is constrained by Hardbrick due to ARB4] , but this method requires you to open the case / body behind your K20Pro. and I cannot guarantee that the flashing process will succeed easily because in some cases if the K20Pro is detected damage / error due to ARB4, then you are required to have an Authorized Mi Account. I might be able to help you remotely, if you agree with the risks & requirements in the flashing process (I can lend my account, but it's not free).
Hi All, I did the same thing - whoever build the UI for MiFlash should be shot - why default that selection to something that will be undesirable!!?
Anyway, i tried to flash indian rom and forgot to set to Clean All, it locked the bootloader.
So i now have redmi recovery and Fastboot options only on phone.
Have tried fastboot + miflash but all options (now with Chinese rom) - says Erase Boot Error.
Tried MiAssistant + Mi PC Suite - it is not detecting the phone in either MiAssistant recovery mode nor Fastboot mode. what is weird is the phone and connector animation on phone is correctly depicting when it is plugged in/unplugged. But the PC suite isnt detecting the device.
Soft bricked - *sigh.... any help will be greatly appreciated from the community
BTW i am more worried that the phone will run out of battery and never wake up once battery drains completely as it is in bootloop into Redmi recovery and can't be turned off (someone tell me how!?) - I don't see the phone respond to charging in any state... : (
Can you still reach fastboot? If so you can unlock phone again and flash TWRP using ADB. After that boot straight into TWRP and connect it to your computer, internal SD storage should then automatically mount. Drag and drop ROM .zip into internal storage, use TWRP file manager to move it out of the data folder and do a default wipe using TWRP. Then flash .zip ROM (for example xiaomi.eu stable) and you should be back in business. Please let me know if you need any files like working recovery image and further instructions.
I had some trouble with my TWRP recovery yesterday, flashed it on unlocked bootloader with Chinese stable ROM installed, on reboot out of fastboot it boots straight into ROM and overwrites the TWRP recovery with default recovery. I fixed it by flashing recovery again, boot straight into it and flash xiaomi.eu stable, now recovery is TWRP and does not get overwritten.
hippo2s said:
Hi All, I did the same thing - whoever build the UI for MiFlash should be shot - why default that selection to something that will be undesirable!!?
Anyway, i tried to flash indian rom and forgot to set to Clean All, it locked the bootloader.
So i now have redmi recovery and Fastboot options only on phone.
Have tried fastboot + miflash but all options (now with Chinese rom) - says Erase Boot Error.
Tried MiAssistant + Mi PC Suite - it is not detecting the phone in either MiAssistant recovery mode nor Fastboot mode. what is weird is the phone and connector animation on phone is correctly depicting when it is plugged in/unplugged. But the PC suite isnt detecting the device.
Soft bricked - *sigh.... any help will be greatly appreciated from the community
BTW i am more worried that the phone will run out of battery and never wake up once battery drains completely as it is in bootloop into Redmi recovery and can't be turned off (someone tell me how!?) - I don't see the phone respond to charging in any state... : (
Click to expand...
Click to collapse
Read this https://forum.xda-developers.com/k20-pro/help/destroyed-error-fastboot-locked-t3946012
And this
https://forum.xda-developers.com/k20-pro/help/k20-pro-bricked-t3951531
You're probably going to have to open up the phone and pay $20 for someone to use their authorised account to flash an official ROM whilst remoting in to your PC.
322Reznov said:
Can you still reach fastboot? If so you can unlock phone again and flash TWRP using ADB. After that boot straight into TWRP and connect it to your computer, internal SD storage should then automatically mount. Drag and drop ROM .zip into internal storage, use TWRP file manager to move it out of the data folder and do a default wipe using TWRP. Then flash .zip ROM (for example xiaomi.eu stable) and you should be back in business. Please let me know if you need any files like working recovery image and further instructions.
I had some trouble with my TWRP recovery yesterday, flashed it on unlocked bootloader with Chinese stable ROM installed, on reboot out of fastboot it boots straight into ROM and overwrites the TWRP recovery with default recovery. I fixed it by flashing recovery again, boot straight into it and flash xiaomi.eu stable, now recovery is TWRP and does not get overwritten.
Click to expand...
Click to collapse
Some great ideas - Just tried to unlock bootloader - This device came pre-unlocked so the device is tied to the seller's account.
I have unlock permission - but unlocker say device is not bound to my account matching my assumptions - anyone know what's the best way to re-claim ownership? Especially when I can't get into ROM at all?
hippo2s said:
Some great ideas - Just tried to unlock bootloader - This device came pre-unlocked so the device is tied to the seller's account.
I have unlock permission - but unlocker say device is not bound to my account matching my assumptions - anyone know what's the best way to re-claim ownership? Especially when I can't get into ROM at all?
Click to expand...
Click to collapse
My comment was meant for OP but I hoped it would help you as well! I am personally not well informed about the Xiaomi / Redmi ownership situation when the seller unlocked the phone.. maybe you can contact them and get a corresponding password to the account, it has been the solution I have seen offered here. Maybe the emergency flash solution from Robbo.5000 works?
I just got this phone a week now and was only able to unlock and flash yesterday, I was aware of the ownership problem thanks to this forum so I bought the sealed CN version. Hope you figure it out!
Thanks guys. I am going for the Test Point solution - have made contact with the Russian tech the others did and made an appointment. I just have to pretend to be Jerry Rig before then and open her up! Fingers crossed!
322Reznov said:
Can you still reach fastboot? If so you can unlock phone again and flash TWRP using ADB. After that boot straight into TWRP and connect it to your computer, internal SD storage should then automatically mount. Drag and drop ROM .zip into internal storage, use TWRP file manager to move it out of the data folder and do a default wipe using TWRP. Then flash .zip ROM (for example xiaomi.eu stable) and you should be back in business. Please let me know if you need any files like working recovery image and further instructions.
I had some trouble with my TWRP recovery yesterday, flashed it on unlocked bootloader with Chinese stable ROM installed, on reboot out of fastboot it boots straight into ROM and overwrites the TWRP recovery with default recovery. I fixed it by flashing recovery again, boot straight into it and flash xiaomi.eu stable, now recovery is TWRP and does not get overwritten.
Click to expand...
Click to collapse
You need yo flash magisk after you flash twrp if you want to run regular miui, to prevent it from overwriting the recovery. Its the same on poco and all xiaomi phones
Mooatreides said:
You need yo flash magisk after you flash twrp if you want to run regular miui, to prevent it from overwriting the recovery. Its the same on poco and all xiaomi phones
Click to expand...
Click to collapse
Ah alright thank you for the info! This is my first ever Xiaomi / Redmi phone haha
dsown said:
The situation is that I just bought the K20 Pro. Then i unlock and flash by miflash with Global Rom via this thread then the device has bricked and has the message "This MIUI version can't be installed on this device".
Tried boot into recovery but the TWRP has gone and the bootloader has been locked.
Flash back to China Rom by miflash is doesn't work either, help me please, i don't know what to do now, i tried every thing i can.
:crying::crying:
P/s: Sorry for my bad English.
Click to expand...
Click to collapse
Did you flash the global rom on an existing running Chinese rom or on an empty device (formatted)? Just for myself cuz I'm not sure whether to unlock and then unable to relock. Thanks.
pungky771 said:
1. if you can still enter fastboot mode, there is a possibility that you can do TWRP flashing again (the TWRP version must be correct so that the data on the cellphone can be read properly) / Flashing from the PC (if you are lucky, the flashing will work properly without any problem or you can bypass the bootloader locked using software or something else). [make sure ROM version must be appropriate because this is very crucial]
2. You can try using the test point method (EDL / Emergency Download Mode) [This method is usually used if your K20Pro is constrained by Hardbrick due to ARB4] , but this method requires you to open the case / body behind your K20Pro. and I cannot guarantee that the flashing process will succeed easily because in some cases if the K20Pro is detected damage / error due to ARB4, then you are required to have an Authorized Mi Account. I might be able to help you remotely, if you agree with the risks & requirements in the flashing process (I can lend my account, but it's not free).
Click to expand...
Click to collapse
My k20 pro is hard bricked and i cant get fast boot or any thing it wont even come on. Assistance please
hippo2s said:
Thanks guys. I am going for the Test Point solution - have made contact with the Russian tech the others did and made an appointment. I just have to pretend to be Jerry Rig before then and open her up! Fingers crossed!
Click to expand...
Click to collapse
Could you please point me to the person you have contacted?
I'm in EDL for about two weeks now, unable to solve it by different means (seller sais 'send it back', which I'm not goong to do; S-unlock has the service unavailable, even though I've paid them and the guy I contacted there tried through TW to no avail, waiting for a 'money back' now)..
Hi all,
I have searched for a solution to this but haven't come across anyone witht the same issue.
I bought a Mi 9 from China which came with the Global rom loaded. I found out that I couldn't use Google Pay unless I rooted with Magisk.
So I went through the process of trying to flash Magisk through fast boot (didn't work - boot loop to recovery) then with TWRP (didn't work - boot to TWRP and freeze).
I then used Miflash to flash the latest global stable version. Unfortunately I didn't notice it was defaulted to "clean all and lock" when I flashed. When the device restarted, it loaded into recovery and was no longer unlocked. The message is "This MIUI version can't be installed on this device". But I can't flash again, because its locked.
I downloaded the MiUnlock app and after running it get the message "Current account is not bound to this device" with instructions to change settings in developer options. But I can't access the developer options because the MIUI isn't loading.
So, yeah. I think I'm in trouble. Any suggestions?
If your device was global version i would say flash fastboot ROM with Mi flash tool or using script flash_all.bat. Then bound your account to your device, then try to unlock recovery. But i red that in some cases Chines version is not so simple, so search, how to flash fastboot ROM on Chines device and if there is some problems with this.
You will need adb and fastboot installed on your pc.
Upd. Man it's all over the internet, just search "This miui version can't be installed on this device". There is a fix with opening the device and so on... but if i was you i would try to contact the seller of the device and ask him to use his account to unlock recovery. My be using teamviewer or similar software.
you bought in china with global rom and it was unlocked already ? because if you tried twrp then the device must be unlocked (bootloader)
then it was a China Version with unlocked bootloader and global rom. you used then the miflash and locked the bootloader again and flashed the global rom...
so you bricked your device....
if found this in an other forum:
"Dear customers, our service provides services in a remote format, if you are from another country .
If you need Mi Authorized EDL Account or you need my services for the restoration of the brick phones and the account is deleted, mi, if you forgot , contact me on my contacts : WhatsApp +7967 777 15 98"
g_seva said:
If your device was global version i would say flash fastboot ROM with Mi flash tool or using script flash_all.bat. Then bound your account to your device, then try to unlock recovery. But i red that in some cases Chines version is not so simple, so search, how to flash fastboot ROM on Chines device and if there is some problems with this.
You will need adb and fastboot installed on your pc.
Upd. Man it's all over the internet, just search "This miui version can't be installed on this device". There is a fix with opening the device and so on... but if i was you i would try to contact the seller of the device and ask him to use his account to unlock recovery. My be using teamviewer or similar software.
Click to expand...
Click to collapse
Thanks! I searched as suggested and am trying a fix from the MIUI forum "[FIX] unbrick your BL LOCKED phone without xiaomi id authorization!!!". If that doesn' work I'll go with the team viewer option. Cheers!
minnnism said:
Hi all,
I have searched for a solution to this but haven't come across anyone witht the same issue.
I bought a Mi 9 from China which came with the Global rom loaded. I found out that I couldn't use Google Pay unless I rooted with Magisk.
So I went through the process of trying to flash Magisk through fast boot (didn't work - boot loop to recovery) then with TWRP (didn't work - boot to TWRP and freeze).
I then used Miflash to flash the latest global stable version. Unfortunately I didn't notice it was defaulted to "clean all and lock" when I flashed. When the device restarted, it loaded into recovery and was no longer unlocked. The message is "This MIUI version can't be installed on this device". But I can't flash again, because its locked.
I downloaded the MiUnlock app and after running it get the message "Current account is not bound to this device" with instructions to change settings in developer options. But I can't access the developer options because the MIUI isn't loading.
So, yeah. I think I'm in trouble. Any suggestions?
Click to expand...
Click to collapse
https://forum.xda-developers.com/Mi-9/help/soldthis-miui-version-installed-device-t3975421
Read carefully and report
1. Try to hold down the buttons vol down and power, see if : fastboot devices sees it. If so XiaoMi Tool will restore it. If not do the same try recovery vol up + power. Do adb devices and see if anything shows up. Worst case you'll have to open the phone up and connect the EDL pins together and it will flash anything. I use minimal ADB and Fastboot phone plugged via USB cable into the computer and run those commands.
2. Fully bricks their device here is the unbrick factory method
https://c.mi.com/thread-1479882-1-0.html
that's connecting EDL pins with the phone case removed for a phone that doesn't boot at all
3. https://youtu.be/8mW0JzKow7E
here's the exact EDL test point required on Mi9
if you can't boot or recognize the device at all via fastboot or ADB. If this doesn't work nothing will...
But it will work, that's what the factory does. Obviously the last resort.
any success?
Hi,
Recently purchased a Mi 9 Global version, got the OTA update to MIUI 11, and everything was well. It is a superb phone, but I like to have root on my phones (mostly for Adblocking and System2, better control overall). I tried to install TWRP (custom version for Mi9) because I wanted to install Magisk/Root or try a different rom eventually. Anyway... I made a huge mistake. After trying to reboot, I noticed things had gone wrong, and was stuck in a boot loop. I guess I panicked and tried to flash the phone back to the latest global MIUI rom (Version 11, Android 10, from official site), using the Xiaomi Flash App but I did not uncheck the "clean and lock bootloader" checkbox on the bottom right of the app, which is somehow enabled by default. The flash failed at that time, for unknown reason, but it seems like it succeeded in locking my bootloader, with an empty partition, except for fastboot access and Mi Recovery module. I have to admit I've always been pretty lucky with all my previous flashes on other devices, and I guess I got a little careless. That was pretty stupid of me, in retrospect.
Since then, I am stuck in either Mi Recovery or Fastboot, and it seems that my originally Global Mi 9 with unlock bootloader has now a locked bootloader. Any attempt at either using the Xiaomi Flash utility gives me an error message ("Erase boot error"), and if I boot into Fastboot and try to flash TWRP, I get the "Remote:Erase is not allowed in Lock State" error.
From what I understand, my options are pretty limited now. The phone is still powered on, stuck in Recovery mode and rebooting every 5 or 10 minutes by itself (probably a way to avoid screen burn-in?), but I can't seem to be able to shut it down in anyway, as there are no fastboot commands to send a shutdown signal. And no matter what button combination I press, the phone always ends up rebooting.
I tried the Xiaomi Unlocker utility, but it needs the phone to be out of recovery to check the credentials binding the phone to my account. All data on the phone has been wiped already, so that's not an option. Two options I have seen :
1. Open the battery cover (required a heat gun and risky), to short some pins and try to flash while there is a short to circumvent the security. I'm not that brave yet, and since the phone is still running and has probably about 80% battery, I don't want to use a heat gun on the device.
2. Shady stuff involving paying 30 or 40 Euros to a random guy who can somehow make everything work magically by remotely logging in on my computer via Teamviewer (Not happening in a million years).
I'm wondering if there is an alternative, other than bringing the device to an official Xiaomi store (I'm in Bangkok and they do have one official shop at Fortune Town), but even then, I don't know if they'll just tell me I got myself an expensive paperweight.
Any help/insight regarding this issue would be much, much appreciated!
Have you tried to press and hold power+vol down when your device reboots? Just before it turns on.
g_seva said:
Have you tried to press and hold power+vol down when your device reboots? Just before it turns on.
Click to expand...
Click to collapse
Every possible combination on reboot will either bring me to Fastboot or Mi Recovery. I have wiped the data partition, there is no OS on the phone as of now.
Twomby said:
Every possible combination on reboot will either bring me to Fastboot or Mi Recovery. I have wiped the data partition, there is no OS on the phone as of now.
Click to expand...
Click to collapse
So xiaomi unlock utility can't unlock bootloader in fastboot?
May be try to use xiaomitool v2.
g_seva said:
So xiaomi unlock utility can't unlock bootloader in fastboot?
May be try to use xiaomitool v2.
Click to expand...
Click to collapse
Xiaomitool V2 is completely useless. The "My phone is bricked" option is not implemented, and I cannot boot into the OS, unfortunately.
To enter fastboot mode, long press the volume down key and the power key. Then unlock bootloader with Xiaomi app.
zahdekar said:
To enter fastboot mode, long press the volume down key and the power key. Then flash stock rom.
Click to expand...
Click to collapse
I have managed to enter fastboot mode, as described in my initial post. The problem is that when I try to flash, I get the following error: "Flashing not allowed in lock state".
Twomby said:
Xiaomitool V2 is completely useless. The "My phone is bricked" option is not implemented, and I cannot boot into the OS, unfortunately.
Click to expand...
Click to collapse
Yep, but it has unlock option in the normal mode and it use scripts made by tool developer, so it worth to try.
g_seva said:
Yep, but it has unlock option in the normal mode and it use scripts made by tool developer, so it worth to try.
Click to expand...
Click to collapse
From what I understand, the "normal mode" needs the tool to be able to access the OS while it's running. I don't have an OS. I will give it a shot tomorrow (3 AM here, exhausted, and don't want to boot into Windows again!), but my hopes are not so high. Anyway, thanks for the help, much appreciated! Will let you know what happens! Cheers!
https://forum.xda-developers.com/Mi-9/how-to/unbrick-mi9-bootloader-locked-destroyed-t3924966/amp/
maybe it will help
zahdekar said:
https://forum.xda-developers.com/Mi-9/how-to/unbrick-mi9-bootloader-locked-destroyed-t3924966/amp/
maybe it will help
Click to expand...
Click to collapse
I've stumbled upon this link earlier today. But it's 404 on my end. Can you access it from where you are? Thanks!
http://c.mi.com/thread-2251372-1-1.html
This is on page 4
zahdekar said:
http://c.mi.com/thread-2251372-1-1.html
This is on page 4
Click to expand...
Click to collapse
Thanks. Tried it, but using these commands only cause a reboot, to recovery mode again. Thanks again for your kind help!
Twomby said:
Thanks. Tried it, but using these commands only cause a reboot, to recovery mode again. Thanks again for your kind help!
Click to expand...
Click to collapse
I have the same problem! "The system has been destroyed" (((
And mi unlock tool not work abount 2 days (authorization not passes)
https://forum.xda-developers.com/Mi-9/help/help-bricked-mi-9-t3921980/page2
The old version of miunlock is working ti unlock bootloader.
zahdekar said:
https://forum.xda-developers.com/Mi-9/help/help-bricked-mi-9-t3921980/page2
The old version of miunlock is working ti unlock bootloader.
Click to expand...
Click to collapse
Unfortunately, this is not true. I have downloaded an old version of Mi Unlock (2.2.406.5), which is supposed to work with Fastboot mode. The result is "Couldn't unlock --> Please download the latest version". And the latest version needs to access the OS to verify the Mi account credentials. I don't have an OS installed. So this won't work. Thanks for the suggestion though!
Twomby said:
Unfortunately, this is not true. I have downloaded an old version of Mi Unlock (2.2.406.5), which is supposed to work with Fastboot mode. The result is "Couldn't unlock --> Please download the latest version". And the latest version needs to access the OS to verify the Mi account credentials. I don't have an OS installed. So this won't work. Thanks for the suggestion though!
Click to expand...
Click to collapse
Hello @Twomby did you managed to get it working it the end?
Same issue here
Hi,
I am encouraging the same issue. Does someone found a solution to this?
tago4ever said:
Hi,
I am encouraging the same issue. Does someone found a solution to this?
Click to expand...
Click to collapse
I came across this Mi8 thread, not sure if it's possible on the Mi9, but he seems to have been able to flash it through EDL mode, you might ask him the question: https://xiaomi.eu/community/threads/mi-8-bricked-from-nowhere.55723/#post-543605
There's also this Mi9 thread: https://forum.xda-developers.com/Mi-9/how-to/unbrick-mi9-bootloader-locked-destroyed-t3924966
Hello all,
I just got the V12.5.5.0 update on my Redmi Note 10 5G (Global).
After I rebooted the system tapping the complete notification it is stuck on the MIUI Recovery screen.
My device is not rooted. It just has received OTA updates.
I tried to reboot the system a few times, but it didn't work.
Also, I tried the safe mode, but it didn't work either.
After Reboot or safe mode, it returns to the MIUI Recovery screen.
I haven't tried the Wipe Data option because I want to back up my files first if possible.
Is there any way to back up my files or be able to fix it?
Please help.
Thanks in advance.
the only solution is enter into fastboot mode and flash stock fastboot firmware via miflash or similar tool
wetito said:
the only solution is enter into fastboot mode and flash stock fastboot firmware via miflash or similar tool
Click to expand...
Click to collapse
I tried that, but I am getting an error saying not allowed in locked state. It looks like the bootloader is locked, so I tried to use the Mi Unlock tool but I am getting error 1004. Also I tried wipe data, but it didn't work either. Right now, I don't care loss my data, I just want to have my phone back, any help is appreciated. Thanks
I have the exact same problem, after the update, lock on recovery mode, then when I tried to flash stock fastboot firmware it says that it is locked. And I also can't access Mi Unlock Tool for some reason, so if anybody has a solution to unlock bootloader I would really appreciate it.
Thanks
I got this same issue. Is there any way we can report this to mi? I don't mind if I lose my data rn, I just want this to start working normally again. someone please help if you know how to fix this
jyeros said:
Hello all,
I just got the V12.5.5.0 update on my Redmi Note 10 5G (Global).
After I rebooted the system tapping the complete notification it is stuck on the MIUI Recovery screen.
My device is not rooted. It just has received OTA updates.
I tried to reboot the system a few times, but it didn't work.
Also, I tried the safe mode, but it didn't work either.
After Reboot or safe mode, it returns to the MIUI Recovery screen.
I haven't tried the Wipe Data option because I want to back up my files first if possible.
Is there any way to back up my files or be able to fix it?
Please help.
Thanks in advance.
Click to expand...
Click to collapse
Same here, albeit I have Chinese version on Global ROM
wetito said:
the only solution is enter into fastboot mode and flash stock fastboot firmware via miflash or similar tool
Click to expand...
Click to collapse
Have you downgraded? Tried to, but accidentally locked bootloader. And it shows that version I have installed isn't compatible.
Use MTK Bypass for reparing https://megafon929.github.io/mtk
Timenator said:
Have you downgraded? Tried to, but accidentally locked bootloader. And it shows that version I have installed isn't compatible.
Click to expand...
Click to collapse
i'm an absolute beginner at this stuff, so could you tell me how to downgrade it?
i suppose try booting in safe mode dint work. the only solution is flashing full firmware, cause the ota packet is bugged.
try this tool
Home - Tool All In One
TOOL ALL IN ONE This tool support 67 different devices of some different OEMs. DOWNLOAD CHANGELOG XDA THREAD OTHERS PROJECTS
toolaio.tk
Timenator said:
Have you downgraded? Tried to, but accidentally locked bootloader. And it shows that version I have installed isn't compatible.
Click to expand...
Click to collapse
I received the device yesterday, the update notification arrived and I installed it, I didn't imagine it could be a problem, I tried to reinstall the rom but the bootloader is also blocked, I don't know what else to do, I'm desperate.
LucciM-Anon said:
i'm an absolute beginner at this stuff, so could you tell me how to downgrade it?
Click to expand...
Click to collapse
Rafaelmaga said:
I received the device yesterday, the update notification arrived and I installed it, I didn't imagine it could be a problem, I tried to reinstall the rom but the bootloader is also blocked, I don't know what else to do, I'm desperate.
Click to expand...
Click to collapse
Found a solution on web. If your phone is on Mediatek(I suppose all Note 10 5g are Mediatek? or no?) So, if it is, just look for an unlocker. You will also need MiFlash and I recommend to install Global MIUI 12.5.4. https://xiaomifirmwareupdater.com/miui/camellian/stable/V12.5.4.0.RKSMIXM/ - MIUI
Step by step guide:
How to Fix Your Hard Bricked Xiaomi Phone With Locked Bootloader
If you are familiar with custom ROM or flashing your phone, then there's a possibility that you have tried flashing your Xiaomi/Redmi/POCO Phone. Earlier
gadgetstouse.com
Timenator said:
Found a solution on web. If your phone is on Mediatek(I suppose all Note 10 5g are Mediatek? or no?) So, if it is, just look for an unlocker. You will also need MiFlash and I recommend to install Global MIUI 12.5.4. https://xiaomifirmwareupdater.com/miui/camellian/stable/V12.5.4.0.RKSMIXM/ - MIUI
Step by step guide:
How to Fix Your Hard Bricked Xiaomi Phone With Locked Bootloader
If you are familiar with custom ROM or flashing your phone, then there's a possibility that you have tried flashing your Xiaomi/Redmi/POCO Phone. Earlier
gadgetstouse.com
Click to expand...
Click to collapse
unfortunately this tutorial doesn't work here, I followed everything but it still didn't unlock the bootloader
Hi guys, I just woke up and my phone was in MIUI Recovery mode, just like yours.. Probably made the update automatically.
It seems this is a recent problem for many of us. I'm nowhere near an expect but I will continue looking for the solution (if possible, without whiping out the data or at least to be able to back-it up).
Will really appreciate if somebody posts if they find a solution.
Thanks!
The only solution is to wipe the phone. I got my lesson I will buy a samsung now
Hello all,
I got the V12.5.5.0 update to on my Redmi Note 10 5G (Global).
After I rebooted the system tapping the complete notification it is stuck on the MIUI Recovery 5.0 screen.
My device is not rooted. It just has received OTA updates.
I tried to reboot the system a few times, but it didn't work.
Also, I tried the safe mode, but it didn't work either.
After Reboot or safe mode, it returns to the MIUI Recovery screen.
I have tried the Wipe Data option and it worked and got me back to MIUI V12.5.4.0. But unfornnatly i lost all my files (about 90 Gb of data).
And this is the last i install any MIUI update until i see that a lot of user's have install it review it
My Poco M3 Pro 5G Global wasn't affected.
I manually download the OTA package and installed successfully.
This phone has a/b slot.
I'm wondering those facing this issue, have you tried switching from a to b slot or vice versa?
fastboot --set-active=a
fastboot --set-active=b
guyz92 said:
My Poco M3 Pro 5G Global wasn't affected.
I manually download the OTA package and installed successfully.
This phone has a/b slot.
I'm wondering those facing this issue, have you tried switching from a to b slot or vice versa?
fastboot --set-active=a
fastboot --set-active=b
Click to expand...
Click to collapse
i think the ota released by xiaomi is bugged. you're operation is correct, but a correct ota might do this automatically. i have noticed that many users with unlocked bootloader, after the update have phone that dont boot. i think they cant enter on fastboot mode. the only solution is flash using mediatek SP FLASH TOOL. or MI FLASH PRO. or ALL IN ONE TOOL
Was someone able to access the "Connect with MIAssistant" part using pcsuite?
I couldn't, but I think it might be because the USB cable I'm using is not the original one from Xiaomi or one compatible.
work only if you have installed also pcsuite on your device. if u have a full stock loked device only solutions are Mediatek tool or miflash pro! or all in one tool. as i said a million time already