General TMO 2217 rooted - OnePlus 10 Pro

HI all,
This isn't my first rodeo but I struggled to find a boot.img that I could patch in Magisk to get root especially since I do not believe the 2217 factory image has been released.
Anyhow, the following one worked for me and my TMO OnePlus Pro 10 NE2217 is rooted: Oxygen OS NE2213_11_A.12 Patched boot image.zip
Big thank you everyone who posted in the NE2215 and NE 2213 thread and dladz for posting the patched boot image.
Mario

mariojohn said:
HI all,
This isn't my first rodeo but I struggled to find a boot.img that I could patch in Magisk to get root especially since I do not believe the 2217 factory image has been released.
Anyhow, the following one worked for me and my TMO OnePlus Pro 10 NE2217 is rooted: Oxygen OS NE2213_11_A.12 Patched boot image.zip
Big thank you everyone who posted in the NE2215 and NE 2213 thread and dladz for posting the patched boot image.
Mario
Click to expand...
Click to collapse
More than welcome mate, glad you're sorted
How's it been? All ok?

Can I get that patched boot image zip file? I thought we could because oneplus hadn't release the bootloader for unlocking yet?

I'm sure there's a command to pull the boot image from a live device. I just can't remember it, think it's the same as the persist image pull but not sure, so if you don't have a full firmware to pull from then that could be the way forward.

jeffsga88 said:
You can just use the global patched boot.img and boot into it from fastboot and then go into Magisk and do direct install. There's no need for the T-Mobile specific boot.img to get root. I will post A.06 and A.07 unmodified boot.imgs later when I have a chance though, just can't right now.
Click to expand...
Click to collapse
Based on the posts in this thread, I don't think you need an NE2217 specific boot.img.. but this is just me remembering from seeing it on the forum.

Prant said:
Based on the posts in this thread, I don't think you need an NE2217 specific boot.img.. but this is just me remembering from seeing it on the forum.
Click to expand...
Click to collapse
Personally I'd always stick with my firmwares boot image, but hey if it works then brilliant

Have you try converting it to International?

DrakenFX said:
Have you try converting it to International?
Click to expand...
Click to collapse
I did but now I keep getting this app is disabled based on security strategy during the setup. Any ideas?

Thanks all for this post I was successful in rooting my T-Mobile OnePlus 10 pro.

Scararms said:
Thanks all for this post I was successful in rooting my T-Mobile OnePlus 10 pro.
Click to expand...
Click to collapse
Ok, call me slow, you said you were successful?? Can I ask how or where the directions are? How did you unlock the bootloader? Did you use the ne2213 boot.img? If so can i ask where you got it?
Thank you very much!

Frustrated_AF said:
Ok, call me slow, you said you were successful?? Can I ask how or where the directions are? How did you unlock the bootloader? Did you use the ne2213 boot.img? If so can i ask where you got it?
Thank you very much!
Click to expand...
Click to collapse
I have that boot image in my root / magisk guide.
(Guide) Rooting, payload dumper, magisk_patched guides NE2213
Hi all, Thought i'd share a guide on how to get these boot images yourself as well as all the files required, plus the patched boot.img if you just want to go ahead and boot/flash it without obtaining one yourself Please read the process before...
forum.xda-developers.com

Frustrated_AF said:
Ok, call me slow, you said you were successful?? Can I ask how or where the directions are? How did you unlock the bootloader? Did you use the ne2213 boot.img? If so can i ask where you got it?
Thank you very much!
Click to expand...
Click to collapse
I went the OnePlus unlock bootloader page for T-Mobile to get the unlock.bin then using the boot image from NE2213 i made a magisk boot image the flash it.

Related

New user d415

Hi guys I got this old lg d415 from my cousin and Wana install some roms on it since I'm a noob on this device I need some help regarding what to do unlock bootloader or what .... I see that d415 has a unlocked bootloader or no ?
Its bootloader is already unlocked just root and flash twrp. kingroot to root and flashify to flash the recovery seem easiest. *Just make sure to update to LP beforehand. here's a link for recovery. You may be able to get a more updated version of the recovery off the twrp site. Also I suggest using the most recent lineage build. lineage
teknoweanie said:
Its bootloader is already unlocked just root and flash twrp. kingroot to root and flashify to flash the recovery seem easiest. *Just make sure to update to LP beforehand. here's a link for recovery. You may be able to get a more updated version of the recovery off the twrp site. Also I suggest using the most recent lineage build. lineage
Click to expand...
Click to collapse
Ypu wrong you have to unlock before flashing unless you are planning on bricking your device. You first have to root it and then flash laf with zeros u lock bootlosder, flash recocery , thenflash rom
Please don't tell people stuff you don't know about. The T-Mobile variant comes with its bootloader already unlocked. Also there is no laf to mess with.
teknoweanie said:
Please don't tell people stuff you don't know about. The T-Mobile variant comes with its bootloader already unlocked. Also there is no laf to mess with.
Click to expand...
Click to collapse
Really? I have tmobile variant and i had to unlock bootloader. Look at this https://forum.xda-developers.com/lg-l90/general/guide-unlock-bootloader-t-mobile-l90-t2836457
Wow I guess you did a bunch of useless stuff that does not matter. About as useful as me putting in does not matter instead of doesn't. Read what googlephone says at the end of the thread at post #204..............yeah..
teknoweanie said:
Wow I guess you did a bunch of useless stuff that does not matter. About as useful as me putting in does not matter instead of doesn't. Read what googlephone says at the end of the thread at post #204..............yeah..
Click to expand...
Click to collapse
Ok, didnt know

[Download] 9.0.7 Patched Boot Image for Magisk

This is just a simple patched boot.img so you can re-do magisk after the update to 9.0.7 if you don't care for bothering with TWRP.
Instructions are the same as the others:
adb reboot bootloader
fastboot boot patched_boot-9.0.7.img
Open the Magisk Manager App and click install. When prompted, choose Direct Install.
Profit!
Download Link: Google Drive: https://drive.google.com/file/d/13RDdihjVwt1oXlaxasRXqu75_QlFJV2T/view?usp=sharing
If you Need Magisk Manager, you can grab it from here: https://github.com/topjohnwu/Magisk/releases/download/manager-v6.0.1/MagiskManager-v6.0.1.apk
Thanks! Works like a charm
Thank you sir. Got me back rooted after the local upgrade to 9.0.7 on my tmo variant
Glad it helped!
Dameon87 said:
Glad it helped!
Click to expand...
Click to collapse
Yea seriously way easier than that root program. Done in under 5minutes. No fuss no muss
I'm completely unrooted and stock. Do I have to unlock bootloader to flash this to use Magisk?
Fade2 said:
I'm completely unrooted and stock. Do I have to unlock bootloader to flash this to use Magisk?
Click to expand...
Click to collapse
Yes
Any confirmation for this working on the T-Mo variant? I am bootloader unlocked with TWRP and Magisk root already.
Dameon87 said:
This is just a simple patched boot.img so you can re-do magisk after the update to 9.0.7 if you don't care for bothering with TWRP.
Instructions are the same as the others:
adb reboot bootloader
fastboot boot patched_boot-9.0.7.img
Open the Magisk Manager App and click install. When prompted, choose Direct Install.
Profit!
Download Link: Google Drive: https://drive.google.com/file/d/13RDdihjVwt1oXlaxasRXqu75_QlFJV2T/view?usp=sharing
If you Need Magisk Manager, you can grab it from here: https://github.com/topjohnwu/Magisk/releases/download/manager-v6.0.1/MagiskManager-v6.0.1.apk
Click to expand...
Click to collapse
how do u get the stock boot.img for 9.0.7 6t international
tswb said:
how do u get the stock boot.img for 9.0.7 6t international
Click to expand...
Click to collapse
Can either grab it from the Payload.bin file after extraction, or use dd to pull it.
treetolber said:
Any confirmation for this working on the T-Mo variant? I am bootloader unlocked with TWRP and Magisk root already.
Click to expand...
Click to collapse
Post #3?
guspeed said:
Post #3?
Click to expand...
Click to collapse
It works fine on the T-Mobile or International.
In almost every case things will work on both unless otherwise noted.
@Dameon87 is there any way you could possibly throw an OOS 9.0.7 stock kernel zip together if it's not too much to ask?
Thanks!
I'll stick with the TWRP method.. after this messed up my phone with no internet at all in wifi or modem I had to go hunt down stock boot image.
Stock Boot Image are found here.. https://forums.oneplus.com/threads/...ta-oxygen-os-repo-of-oxygen-os-builds.941780/
strictlyphat said:
Thank you sir. Got me back rooted after the local upgrade to 9.0.7 on my tmo variant
Click to expand...
Click to collapse
So you had the t-mob variant.
then you unlocked bootloader and flashed 9.0.6 giving you the international variant.
How did you upgrade to 9.0.7?? Surely not OTA right?
CCJ22 said:
So you had the t-mob variant.
then you unlocked bootloader and flashed 9.0.6 giving you the international variant.
How did you upgrade to 9.0.7?? Surely not OTA right?
Click to expand...
Click to collapse
Local upgrade.
I have a question.. nothing to do with this thread. I tried making my own thread but the xda app won't let me.. however here is my question.. I just tried updating my greenify module for magisk and it said install fails.. reason is because my API is 28 and the max should be 27??? It also told me to downgrade to a different Android.... Anyone ever year such a thing?? And is there a fix for this???
anthony10126 said:
I have a question.. nothing to do with this thread. I tried making my own thread but the xda app won't let me.. however here is my question.. I just tried updating my greenify module for magisk and it said install fails.. reason is because my API is 28 and the max should be 27??? It also told me to downgrade to a different Android.... Anyone ever year such a thing?? And is there a fix for this???
Click to expand...
Click to collapse
You should address your issue on the greenify4magisk thread. The dev posted explaining the reason for the issue you encounter at the last page. I don't think greenify is needed for OnePlus 6T. 1+6T has a feature called Adaptive Battery which looks like it trying to do the same thing as greenify.
TheKnux said:
@Dameon87 is there any way you could possibly throw an OOS 9.0.7 stock kernel zip together if it's not too much to ask?
Click to expand...
Click to collapse
Dear,
I have created a stock kernel from 9.0.7 as per in the attachment.
Thanks.

[GUIDE] Root howto

For Complete Root howto please read this post
==============================================================
Quick root howto for Realme X2
What is written below is for both CN and EU versions, but the files attached are for CN only!
Please pay attention that files attached are version-specific
Credits: Magisk (@topjohnwu), TWRP for Realme X2 (@mauronofrio)
Unlock the bootloader with a help of apk file
Install Magisk manager apk to your stock system
Enter fastboot mode and perform there:
fastboot flash --disable-verification vbmeta vbmeta.img
fastboot flash boot magisk_patched.img
fastboot reboot
EDIT/NOTE
In order to have Magisk out of Core Only Mode:
boot into TWRP, mount SYSTEM in RW mode and from the computer perform
Code:
adb shell "cat /system/build_19771.prop >> /system/build.prop"
adb reboot
For EU version (RMX1993) you should replace 19771 with 19672 in the filename.
EDIT 2
I attach here a file with A.13 version boot image patched for magisk. Of course, you should change the file name in the howto above, the line with fastboot flash boot ...
In the next few days I hope to provide more detailed Root howto, thus there will be no dependency on any files from here for the next version releases.
EDIT 3
Here comes the next version A.14. Please find the corresponding file attached. vbmeta.img stays identical for all versions.
Thanku
通过我的 RMX1991 上的 Tapatalk发言
I've tested it. I passed it perfectly
通过我的 RMX1991 上的 Tapatalk发言
---------- Post added at 10:51 PM ---------- Previous post was at 10:50 PM ----------
怎样才能在twrp 里刷入magisk ?
通过我的 RMX1991 上的 Tapatalk发言
Does using this disable the fingerprint scanner?
gwiqu said:
Does using this disable the fingerprint scanner?
Click to expand...
Click to collapse
Of course. Even before this, when bootloader is unlocked, it stops working
Does the 1993 version need a different vbmeta?
surferbyter said:
Does the 1993 version need a different vbmeta?
Click to expand...
Click to collapse
vbmeta.img files are identical in the current ROMs for CN (A.12) and EU (A.15)
yakovpol said:
Of course. Even before this, when bootloader is unlocked, it stops working
Click to expand...
Click to collapse
Is there any way to have the finger print scanner back?
yakovpol said:
vbmeta.img files are identical in the current ROMs for CN (A.12) and EU (A.15)
Click to expand...
Click to collapse
Excellent, I have already tried the root without installing the twrp. then waiting for better times I restored stock locking up the bootloader. Here on the forum regarding the root guides, there are two and there is some confusion for a neophyte who wants to try his hand at mod. It would need only one clear and complete, perhaps integrating it with the procedure for restoring stock if one wanted to go back. For now I'm working like crazy, for example tonight night shift. but as soon as I have some time I will try to make a draft.
Unlocking guide with:
links and steps to follow for using the tool, (deep start test)
commands for dump recovery stock, (dd if)
links to files and commands for the flash of vbmeta and magisk,
link to the file and commands for the TWRP flash.
Guide to stock recovery with:
links and commands for the recovery stock flash,
link to the official rom to flash with the recovery stock,
Command to lock the bootloader,
links and steps for using the tool, (exit from the deep test)
in the end they would put the XDA threads links to any custom roms, for example starting from this one.
surferbyter said:
Excellent, I have already tried the root without installing the twrp. then waiting for better times I restored stock locking up the bootloader. Here on the forum regarding the root guides, there are two and there is some confusion for a neophyte who wants to try his hand at mod. It would need only one clear and complete, perhaps integrating it with the procedure for restoring stock if one wanted to go back. For now I'm working like crazy, for example tonight night shift. but as soon as I have some time I will try to make a draft.
Unlocking guide with:
links and steps to follow for using the tool, (deep start test)
commands for dump recovery stock, (dd if)
links to files and commands for the flash of vbmeta and magisk,
link to the file and commands for the TWRP flash.
Guide to stock recovery with:
links and commands for the recovery stock flash,
link to the official rom to flash with the recovery stock,
Command to lock the bootloader,
links and steps for using the tool, (exit from the deep test)
in the end they would put the XDA threads links to any custom roms, for example starting from this one.
Click to expand...
Click to collapse
Thank you for good advice! I am a hobbyist, not a professional. I have numerous obligations too. But I shall do my best.
I tried the deeptest apk, and when I enter start the in-depth test, the phone reboots, enters the fastboot mode for 1 second and the reboots again normally. What's the issue here?
wasi006 said:
I tried the deeptest apk, and when I enter start the in-depth test, the phone reboots, enters the fastboot mode for 1 second and the reboots again normally. What's the issue here?
Click to expand...
Click to collapse
Evidently, you did not succeed with entering fastboot. Check if OEM unlock is enabled in Developer Settings and try again with DeepTesting app
Happiest new is that Fingerprint is working after bootloader unlocking (After A13 Update).
mishal.sarwar1 said:
Happiest new is that Fingerprint is working after bootloader unlocking (After A13 Update).
Click to expand...
Click to collapse
Is this true can anyone confirm this on Indian Variant I restricted myself from buying this phone because I read that in realme phones the Fingerprint will stop working after unlocking the bootloader. If that's not the case I'll buy myself one :laugh:
njaya95 said:
Is this true can anyone confirm this on Indian Variant I restricted myself from buying this phone because I read that in realme phones the Fingerprint will stop working after unlocking the bootloader. If that's not the case I'll buy myself one :laugh:
Click to expand...
Click to collapse
Realme Authority is now concern about it. You can wait for a while or can buy it.
I don't know about indian varient. Chinese one is now working great with unlocked bootloader.
mishal.sarwar1 said:
Realme Authority is now concern about it. You can wait for a while or can buy it.
I don't know about indian varient. Chinese one is now working great with unlocked bootloader.
Click to expand...
Click to collapse
I mean the fp??? Is it working or not???
njaya95 said:
I mean the fp??? Is it working or not???
Click to expand...
Click to collapse
Its working on Chinese one but not tested on Indian varrient, but it should work.
narshi shukla said:
Its working on Chinese one but not tested on Indian varrient, but it should work.
Click to expand...
Click to collapse
Thanks for the reply bro, will buy the phone when it's back in stock.
For A14 please
Can anyone confirm if the fingerprint is still working after unlocking bootloader for A14?
It will make a huge difference for me

Question [Question] Is Realme 8 Pro rootable?

I've been waiting since its release to be able to root it, there are some tutorials online but they look sketchy and I dont trust them.
The only one I would trust is made by the magisk team but it has a link that says "cooming soon" when you try to download the Realme 8 Pro stock rom, which is also not present on the official realme website.
This is what made me skeptic: how can the youtube indian guy have the stock rom meanwhile neither the official website and magisk have it? is it worth to give it a try or if I mess up I wont be able to restore my phone? has anyone tried to do so? which tutorial should i use?
At this time there is no solution to root realme 8 pro, in-depth test app is not working with this device so far, firmware is not avaleble to download (from a credible source). We just have to wait, i don't know for how long, i just hope devs will find a solution in a shot time.
Is fileload.coloros.com trusted??
First the bootloader "can" be unlocked and this is the primarly thing to do.
Secondary rom images allready exists.
https://oppostockrom.com/oppo-realme-8-pro-rmx3081
http://www.frpbdteam.online/
Zip and opf's can be extracted .... So boot (kernel and ramdisk) can be modified to work with modified Magisk and all other needed things (Bootloader unlock, FRP, vbMETA, Verity ...) to gain root.
Regarding recovery and flash via current recovery the things are not known yet, also custom recovery options.
Update: Will be very hard to participate for this device ...
Yeah
sapu98 said:
I've been waiting since its release to be able to root it, there are some tutorials online but they look sketchy and I dont trust them.
The only one I would trust is made by the magisk team but it has a link that says "cooming soon" when you try to download the Realme 8 Pro stock rom, which is also not present on the official realme website.
This is what made me skeptic: how can the youtube indian guy have the stock rom meanwhile neither the official website and magisk have it? is it worth to give it a try or if I mess up I wont be able to restore my phone? has anyone tried to do so? which tutorial should i use?
Click to expand...
Click to collapse
Stock ROM is here
There are available stock roms, update OTA's but to be able to flash,root ... first the unlock bootloader should be available. Since the HAL is missing from the fastboot and the bootloader is still locked the only thing is to flash is original stock ROM.
Secondary AVB check, meta, recovery, boot, FRP and other things should be done also.
Currently the MSM flash is only available for signed and official files, also MD5 checked flash files.
There is no working piece of tutorial to obtain any of it. Some partially and also magisk patched boot allready done by me, but cannot flash it to test and prepare other needed steps.
Recovery is original, there is no log or cache log currently available to check.
Yes, But You have to root realme 8 pro rmx 3081 stock rom as there is no custom rom available i have sucessfully rooted realme 8 pro
EXPORT and GDPR Roms are different.
Guess you have EXPORT and not the GDPR (EU).
No custum roms available just because the bootloader lock and/or EDL verification and/or ABV and/or parted excrypted userspaced super.
Rehankhan189 said:
Yes, But You have to root realme 8 pro rmx 3081 stock rom as there is no custom rom available i have sucessfully rooted realme 8 pro
Click to expand...
Click to collapse
Can you please make a guide(in details) about how you've rooted? Step by step.
Rehankhan189 said:
Yes, But You have to root realme 8 pro rmx 3081 stock rom as there is no custom rom available i have sucessfully rooted realme 8 pro
Click to expand...
Click to collapse
Flash gsi rom
Ashik640 said:
Can you please make a guide(in details) about how you've rooted? Step by step.
Click to expand...
Click to collapse
Unlock bootloader using adb, patch boot.img using magisk flash
@Malware said:
Unlock bootloader using adb, patch boot.img using magisk flash
Click to expand...
Click to collapse
Can you have a more specific guideline please?
ThnhNgn said:
Can you have a more specific guideline please?
Click to expand...
Click to collapse
A detailed guide is available here! https://magiskapp.com/root-realme-8-pro/#
ThnhNgn said:
Can you have a more specific guideline please?
Click to expand...
Click to collapse
Don't trust those links, realme 8 pro is not rootable in any way.
SIRKRA said:
Don't trust those links, realme 8 pro is not rootable in any way.
Click to expand...
Click to collapse
So, is the screenshot of @Rehankhan189 fake?
SIRKRA said:
Don't trust those links, realme 8 pro is not rootable in any way.
Click to expand...
Click to collapse
dude are you kidding ?
realme 8 pro can be rooted using magisk (but first unlock bootloder)
Ashik640 said:
So, is the screenshot of @Rehankhan189 fake?
Click to expand...
Click to collapse
probably that is not fake because it can be rooted using magisk but first unlock bootloder
Then ask @StratOS_HTC if it really is, gdpr for sure not, export maybe
GDPR bootloader EU version cannot be bootloader unlocked or rooted ...

Does anyone know where to find specific root / twrp guide for lg v40 sprint crossflashed to korean android 10?

Hello to eveyone.
I have been searching the forum for a spefic guide to:
Unlock bootloader
install TWRP
flash magisk
To my beloved lg v40 from Sprint that I sucessfully crossflashed to the Korean firmware that has android 10.
Now my phone's information is the following:
Software version: V409NUA30b
Model number: LM-V409NUA (used to be V405UA)
Again, im running android 10. I just want to root it so I can control the processor to get a better performance in gaming (dolphin emulator).
Thanks in advance for any help...
quote:
Hi man, thanks for your quick answer. Sorry that I posted my question in the wrong section. I wasn't sure if it had to be posted here or in Q&A, Ur right! I just picked the wrong option.
Yes! My phone has the software version V409NUA30b, it is the latest I could find when I decided to flash it to my phone I was happy with it until I found out that somehow the phone limits the processor's performance when it gets to certain temperature specifically when I use dolphin or cirtra emulators, tha's why i want to root it. But it seems It cannot be done unless you install TWRP, which also needs to have the bootloader unlocked.
I believe I won't get any OTA updates due to crossflashing and also because I am based in the republic of Panama.
I read the thread you are refering to and I saw that the files given to use QFIL are for Oreo and also the author suggested that they are not supposed to work with Pie, even though some people has been able to use them.
That is why I thought that the guide did no apply to my phone.
I am going to follow your advice and post this question in the right place.
If you know anything else, please do not hesitate in letting me know.
thanks again!
/quote
So, first, the guide you're referring to does have a few Pie files attached to it, but that's because the author was on Pie when he wrote it. The procedure he describes works for all versions of android, including Q.
So it certainly does apply, just be sure to save off your own abl and laf partitions prior to writing over them or erasing them. And also your boot partition, and for good measure, save ftm, fsg, modem, modemst1 and modemst2, they contain specific imei and s/n info for your specific / individual phone.
Also, there will never again be updates, lg is out of phone business, so forget that
check this thread for some additional info and files you will need. I'd suggest use lgup to go to 30f, that way you'll at least have the last security patch available.
cheers
AsItLies said:
quote:
Hi man, thanks for your quick answer. Sorry that I posted my question in the wrong section. I wasn't sure if it had to be posted here or in Q&A, Ur right! I just picked the wrong option.
Yes! My phone has the software version V409NUA30b, it is the latest I could find when I decided to flash it to my phone I was happy with it until I found out that somehow the phone limits the processor's performance when it gets to certain temperature specifically when I use dolphin or cirtra emulators, tha's why i want to root it. But it seems It cannot be done unless you install TWRP, which also needs to have the bootloader unlocked.
I believe I won't get any OTA updates due to crossflashing and also because I am based in the republic of Panama.
I read the thread you are refering to and I saw that the files given to use QFIL are for Oreo and also the author suggested that they are not supposed to work with Pie, even though some people has been able to use them.
That is why I thought that the guide did no apply to my phone.
I am going to follow your advice and post this question in the right place.
If you know anything else, please do not hesitate in letting me know.
thanks again!
/quote
So, first, the guide you're referring to does have a few Pie files attached to it, but that's because the author was on Pie when he wrote it. The procedure he describes works for all versions of android, including Q.
So it certainly does apply, just be sure to save off your own abl and laf partitions prior to writing over them or erasing them. And also your boot partition, and for good measure, save ftm, fsg, modem, modemst1 and modemst2, they contain specific imei and s/n info for your specific / individual phone.
Also, there will never again be updates, lg is out of phone business, so forget that
check this thread for some additional info and files you will need. I'd suggest use lgup to go to 30f, that way you'll at least have the last security patch available.
cheers
Click to expand...
Click to collapse
Thanks again man.
So i was able to update to V4009NUA30f. Thank you for letting me know there was a new version.
I followed the process to unlock the bootloader but somehow I am unable to get into bootloader / fastboot mode. When I flash the v35eng.img to the abl_a it seems to be ok according to Qfill. But my bootloader does not seem to exist in the phone.
I tried to boot the phone into bootloader using adb reboot bootloader but it only restarts the phone.
Do you have an idea what could be wrong?
Thanks!
pichulo said:
Thanks again man.
So i was able to update to V4009NUA30f. Thank you for letting me know there was a new version.
I followed the process to unlock the bootloader but somehow I am unable to get into bootloader / fastboot mode. When I flash the v35eng.img to the abl_a it seems to be ok according to Qfill. But my bootloader does not seem to exist in the phone.
I tried to boot the phone into bootloader using adb reboot bootloader but it only restarts the phone.
Do you have an idea what could be wrong?
Thanks!
Click to expand...
Click to collapse
yes, yer flashing it to the inactive slot. The thing about the v35 eng abl, when you have it flashed (to the correct slot), your phone won't boot. It will only be able to go to fastboot.
In your case, the phone is booting, so you have to be flashing v35 eng abl to the wrong slot. It's the other one that's active.
cheers
AsItLies said:
yes, yer flashing it to the inactive slot. The thing about the v35 eng abl, when you have it flashed (to the correct slot), your phone won't boot. It will only be able to go to fastboot.
In your case, the phone is booting, so you have to be flashing v35 eng abl to the wrong slot. It's the other one that's active.
cheers
Click to expand...
Click to collapse
OK! So I guess we are talking about the abl_b, right!?
Also, I saw in the other link you sent me the twrp+boot image. Once I unlock the bootloader and flash my back up abl file, then I would have to flash it (the twrp+boot) to the abl_b slot again right!?
pichulo said:
OK! So I guess we are talking about the abl_b, right!?
Also, I saw in the other link you sent me the twrp+boot image. Once I unlock the bootloader and flash my back up abl file, then I would have to flash it (the twrp+boot) to the abl_b slot again right!?
Click to expand...
Click to collapse
No no no. You never flash an image to an incorrect partition. Abl partitions get abl images, boot partitions get boot images. Don't mix them up!

Categories

Resources