Related
Hello everyone today i flash an incompatible rom with twrp and my screen turn completely black After reboot twrp in recovery .
Do you have solution ?
Sorry for my bad English
Hi if you can open bootloader, flash stock rom
The easy solution is press power+volume down. Phone should boot into fastboot mode. Then flash fastboot ROM without relocking the bootloader.
The other way is taking phone to service center. They'll flash stock in edl mode.
I can't seem to put it in fastboot mode. but by pressing the 3 buttons or by changing the buttons I managed to put it in something else I think that at times I manage to put it on a fastboot but the screen always remains black impossible to know i have this message in device manager (Unknown usb devices request for descriptor) do you think it causes me to reinstall drivers what could be the cause? how to adjust as soon as i can connect it so l is not a Qualcomm USB hs 2008.
Miui 13 said:
I can't seem to put it in fastboot mode. but by pressing the 3 buttons or by changing the buttons I managed to put it in something else I think that at times I manage to put it on a fastboot but the screen always remains black impossible to know i have this message in device manager (Unknown usb devices request for descriptor) do you think it causes me to reinstall drivers what could be the cause? how to adjust as soon as i can connect it so l is not a Qualcomm USB hs 2008.
Click to expand...
Click to collapse
Doesn't EDL need authorized mi account these days? It'd better to visit service center because installing EDL driver & all the fuss will be useless
May be you can find some drivers which can recognise your phone to work with ADB in fastboot and flash a new ROM. If that doesn't work, then a service center is the next best option.
Miui 13 said:
I can't seem to put it in fastboot mode. but by pressing the 3 buttons or by changing the buttons I managed to put it in something else I think that at times I manage to put it on a fastboot but the screen always remains black impossible to know i have this message in device manager (Unknown usb devices request for descriptor) do you think it causes me to reinstall drivers what could be the cause? how to adjust as soon as i can connect it so l is not a Qualcomm USB hs 2008.
Click to expand...
Click to collapse
Sounds like your device boots into EDL mode, likely due to a corrupted bootloader from the incompatible firmware you've flashed. If you have the EDL firehose files for your device, you can use QFIL to flash a compatible ROM, alternatively try to EDL flash the boot partition with a working boot (that may get you from EDL to a soft brick with a working bootloader and Fastboot - from there you can try try and flash a working firmware).
RAMBO29 said:
May be you can find some drivers which can recognise your phone to work with ADB in fastboot and flash a new ROM. If that doesn't work, then a service center is the next best option.
Click to expand...
Click to collapse
I unfortunately tried to install all the drivers but nothing has worked difficult to know if a fastboot is started it's a hassle when the screen is completely black even with the task manager open I don't I did not succeed finally I ended up paying someone who had me unlock my phone it cost me 29 € my phone is now unlocked which I can advise on the other hand for those who would like to install roms or root their phone is good it is to wait until no auth file is leaked
Andrologic said:
Sounds like your device boots into EDL mode, likely due to a corrupted bootloader from the incompatible firmware you've flashed. If you have the EDL firehose files for your device, you can use QFIL to flash a compatible ROM, alternatively try to EDL flash the boot partition with a working boot (that may get you from EDL to a soft brick with a working bootloader and Fastboot - from there you can try try and flash a working firmware).
Click to expand...
Click to collapse
I see it's super interesting as information I did not know that we could flash only a partition with QFIL.
Unfortunately I could not find the firehose files for the phone as the phone is probably very recent.
I had to pay someone to unlock my phone with an edl account of course .
My work now
Was the unlocking done in person or online? Anyways glad to see it's sorted out.
Miui 13 said:
I unfortunately tried to install all the drivers but nothing has worked difficult to know if a fastboot is started it's a hassle when the screen is completely black even with the task manager open I don't I did not succeed finally I ended up paying someone who had me unlock my phone it cost me 29 € my phone is now unlocked which I can advise on the other hand for those who would like to install roms or root their phone is good it is to wait until no auth file is leaked
Click to expand...
Click to collapse
RAMBO29 said:
Was the unlocking done in person or online? Anyways glad to see it's sorted out.
Click to expand...
Click to collapse
yes it was done online I unlocked it with TeamViewer thanks to an edl account
Welp, first day of owning the OnePlus Ace and I've already bricked it lmao. Need some help in trying to unbrick it.
So last night I successfully rooted my device using magisk, but after experimenting I just decided to revert back to being unrooted, since I realised I didn't actually need many of the functions root allows. Derooted using Magisk, checked that it was unrooted, then went into fastboot mode to re-lock the bootloader. Did so, restarted and I was presented with the dreaded "The current image (boot/recovery) have been destroyed" error screen and endless bootlooping. I cannot access fastboot mode or recovery mode with button combinations, tried holding Vol + and power, Vol - and power but no dice. I believe I ended up bricking because I forgot to flash the stock vbmeta.img before locking the bootloader.
I've made some progress in getting to the MediaTek Emergency Download Mode (which I believe is also either called BROM or Preloader) in order to flash a stock rom. I found out that holding down both Vol + and Vol - at boot will enable this emergency download mode for a few seconds, before going to the destroyed boot/recovery error screen. The issue is, while I've managed to get the phone detected by my computer in this state in COM5 as a 'MediaTek PreLoader USB VCOM_V1632 (Android), none of the programs said to flash a stock rom will detect it. I've tried mtk_client, mtk bypass tool, SP Flash, even regular fastboot and adb tools, but none of them will detect the device, even though Windows does.
The only smart thing I did was refraining from transferring all of my files from my old phone to this one, so luckily I've got a phone to fall back on. Basically, until I find a fix, the Ace will have to stay in it's box makes me wish I never messed with root in the first place lmao. And because I imported the phone there's no warranty and no service centres for OnePlus in my country that can help.
Anyone have any ideas for how I can get the phone detected in these applications? Is it an issue of the SoC not being supported yet by these programs because it's relatively new? Are there any alternate ways to get to the fastboot menu? Any help would be greatly appreciated!
Thanks!
Update: If someone would be able to extract a scatter file from their own OnePlus Ace too, I think that may help me
Sorry that you've ran into this, but thanks for confirming bootloader can be unlocked, and root is possible.
Getting the 10R over the Realme GT 2 (sad situation of bootloader unlock not possible). Hope you get an extract soon
Made some progress!
Got my hands on the Ace's firmware files, which included the scatter file. Redownloaded the newest 6.2 version of SP Flash Tool and loaded the scatter and auth files successfully. Clicked download, connected USB to phone while holding Vol + and Vol - and finally! Sp Flash Tool connected to the phone! However, now I've run into another problem: SP Flash Tool will show a red progress bar at the bottom saying 'Download DA', it will reach 100% quickly then throw me a very vague error simply saying 'error_msg'. And that's it. Tried unchecking different boxes, reinstalled drivers but it will always throw back this error.
Any ideas to figure out what the error is and fix it would be amazing
hello, im here to show support. My ace also bricked because i want to change from color os to oxygen. I used fastboot enhanced, might have missed a step and bricked. Mine also import, but the shop i bought offers 1 year warranty. Shop says have to wait for msm download tools to reflash or i have to pay $60 to send back to China because my own fault. Man, it is going to be a long wait for msm tools. haha
KeepingKeyes said:
saying 'error_msg'.
Click to expand...
Click to collapse
try the mtk client and command - python mtk payload,and try sp flashtool again.please also share the files for firmware
DimRim said:
try the mtk client and command - python mtk payload,and try sp flashtool again.please also share the files for firmware
Click to expand...
Click to collapse
Tried this method, but didn't work. Kept giving me a "Handshake failed: retrying" error when connecting the phone to the computer.
Here's a link the the firmware: OnePlus Ace Firmware
KeepingKeyes said:
Tried this method, but didn't work. Kept giving me a "Handshake failed: retrying" error when connecting the phone to the computer.
Here's a link the the firmware: OnePlus Ace Firmware
Click to expand...
Click to collapse
maybe this is because of the new chip and there is no support for bypassing it.I thought the method would work.also a tip-edit the scatter file, namely partition_name: super or system,changing the value is_download: false to is_download: true.hopefully help
And thank you for sharing the files
I too am stuck with Brick.
Is there a Bypass for the Demesity 8100 being developed?
This device is mostly Oppo, but there is no Oppo flash Tool?
There is very little information available.
KeepingKeyes said:
Welp, first day of owning the OnePlus Ace and I've already bricked it lmao. Need some help in trying to unbrick it.
So last night I successfully rooted my device using magisk, but after experimenting I just decided to revert back to being unrooted, since I realised I didn't actually need many of the functions root allows. Derooted using Magisk, checked that it was unrooted, then went into fastboot mode to re-lock the bootloader. Did so, restarted and I was presented with the dreaded "The current image (boot/recovery) have been destroyed" error screen and endless bootlooping. I cannot access fastboot mode or recovery mode with button combinations, tried holding Vol + and power, Vol - and power but no dice. I believe I ended up bricking because I forgot to flash the stock vbmeta.img before locking the bootloader.
I've made some progress in getting to the MediaTek Emergency Download Mode (which I believe is also either called BROM or Preloader) in order to flash a stock rom. I found out that holding down both Vol + and Vol - at boot will enable this emergency download mode for a few seconds, before going to the destroyed boot/recovery error screen. The issue is, while I've managed to get the phone detected by my computer in this state in COM5 as a 'MediaTek PreLoader USB VCOM_V1632 (Android), none of the programs said to flash a stock rom will detect it. I've tried mtk_client, mtk bypass tool, SP Flash, even regular fastboot and adb tools, but none of them will detect the device, even though Windows does.
The only smart thing I did was refraining from transferring all of my files from my old phone to this one, so luckily I've got a phone to fall back on. Basically, until I find a fix, the Ace will have to stay in it's box makes me wish I never messed with root in the first place lmao. And because I imported the phone there's no warranty and no service centres for OnePlus in my country that can help.
Anyone have any ideas for how I can get the phone detected in these applications? Is it an issue of the SoC not being supported yet by these programs because it's relatively new? Are there any alternate ways to get to the fastboot menu? Any help would be greatly appreciated!
Thanks!
Click to expand...
Click to collapse
Still stuck or were you able to find any solution?
yashaswee1708 said:
Still stuck or were you able to find any solution?
Click to expand...
Click to collapse
Unfortunately not yet, the most promising option will be to wait for an MTK Auth Bypass utility to be developed for the Dimensity 8100 chipset. There might be active development on this front, so hopefully it will come soon.
The other option would be to find someone to do a remote flash, someone who has official Oppo/OnePlus flashing software and an account to use it. I believe I've found the official firmware to flash the phone in this state, however you need credentials to log in to it and access it. I think it will also specifically have to be Chinese credentials, as India login details may not allow you to flash a OnePlus Ace model. I tried to get someone over at (<Moderator Edit>: unallowed site name removed) to do a remote flash, and he couldn't because he had India credentials, but not Chinese credentials
KeepingKeyes said:
Unfortunately not yet, the most promising option will be to wait for an MTK Auth Bypass utility to be developed for the Dimensity 8100 chipset. There might be active development on this front, so hopefully it will come soon.
The other option would be to find someone to do a remote flash, someone who has official Oppo/OnePlus flashing software and an account to use it. I believe I've found the official firmware to flash the phone in this state, however you need credentials to log in to it and access it. I think it will also specifically have to be Chinese credentials, as India login details may not allow you to flash a OnePlus Ace model. I tried to get someone over at (<Moderator Edit>: unallowed site name removed) to do a remote flash, and he couldn't because he had India credentials, but not Chinese credentials
Click to expand...
Click to collapse
Oh. I had OnePlus 7 previously, there were few ways to flash stock firmware. The common one was MSM Tool, other one was Fastboot enhance.
But few times I flashed stock firmware manually like payload dump payload.bin and flash partitions manually from fastboot. Maybe this could work.
yashaswee1708 said:
Oh. I had OnePlus 7 previously, there were few ways to flash stock firmware. The common one was MSM Tool, other one was Fastboot enhance.
But few times I flashed stock firmware manually like payload dump payload.bin and flash partitions manually from fastboot. Maybe this could work.
Click to expand...
Click to collapse
I seem to have made fastboot inaccessible on my device, so I've been unable to use Fastboot enhance or utilise any ways to flash using fastboot
Damn!! I hope you find some way to fix your device. Good luck.
关于一加ACE如何优雅的刷入氧OS12.1这件事 来自 天伞桜 - 酷安
I create instruction, if you phone boot to fastboot mode
OnePlus 10R/Ace - Официальные прошивки - 4PDA
OnePlus 10R/Ace - Официальные прошивки
4pda.to
i`ts in russian, but you can use translate
GTAstar said:
I create instruction, if you phone boot to fastboot mode
OnePlus 10R/Ace - Официальные прошивки - 4PDA
OnePlus 10R/Ace - Официальные прошивки
4pda.to
i`ts in russian, but you can use translate
Click to expand...
Click to collapse
Hello. after unlocking the bootloader I have the message "Orange State. OS Not Being Verified Or Custom OS. Dismiss After 5 Seconds." but the system booted up. After uploading boot.img, the phone got stuck in bootloop. Unfortunately, the guide above did not help.
hamsteer said:
Hello. after unlocking the bootloader I have the message "Orange State. OS Not Being Verified Or Custom OS. Dismiss After 5 Seconds." but the system booted up. After uploading boot.img, the phone got stuck in bootloop. Unfortunately, the guide above did not help.
Click to expand...
Click to collapse
Are you still able to boot to Fastboot?
yashaswee1708 said:
Are you still able to boot to Fastboot?
Click to expand...
Click to collapse
Yes. I can flash files in cmd and FastbootEnhance but in practice it looks like they were not saved.
hamsteer said:
Yes. I can flash files in cmd and FastbootEnhance but in practice it looks like they were not saved.
Click to expand...
Click to collapse
So you are not able to boot right?
If not, you can try flashing the partitions manually from fastboot. (If you are willing to try I can provide the steps. This works for other OnePlus devices.)
Can anyone please help me? I did the all steps but nothing works and I get the STATUS_EXT_RAM_EXCEPTION (0xC0050005) error... The only solution I found is to drain the battery while the device is bootlooping but sadly, my phone vibrates 1 second and dies because there is no fastboot or recovery or nothing to boot with, I tried SP Flash Tool but it stucks at Download DA 100% then shows me the ram error. PLEASE HELP ME
P.S: I know people will say MTK Bypass is a virus but please ignore it and focus on my main subject
Use latest fastboot rom and download agent to mtk all.bin
Restart phone by power+ volume key
Also usb dk driver and libusb tool
Or remove back cover and battery take care with fingerprint
Already done everything you said, nothing works.
iOussamato_ said:
Already done everything you said, nothing works.
Click to expand...
Click to collapse
Try again
faisal9666 said:
Try again
Click to expand...
Click to collapse
What do you mean try again? I tried it 50 times and still doesn't work, tried so many other roms and DAs and NOTHING
iOussamato_ said:
What do you mean try again? I tried it 50 times and still doesn't work, tried so many other roms and DAs and NOTHING
Click to expand...
Click to collapse
Very strange
STATUS_EXT_RAM_EXCEPTION (0xC0050005)
1.
Hello bro, I only registered on XDA to inform you and gonna post on other thread for people suffering from this error.
2.
I have redmi 9c angelica
3.
I had the same issue like yours. Just fixed it 2,3 mins ago after many days of suffering. I tried 3 fastboot roms in which only this work (angelica_global_images_V12.0.12.0.QCRMIXM_20210412.0000.00_10.0_global). I hope it also work with you. Give a try
i followed this and boom now all of my stress has been released.
Firmware link
How to Unbrick Redmi 9C (angelica) without using auth account. Tested and working! - OmBob Opreker
This is tutorial how to unbrick Xiaomi Redmi 9C (angelica) using mediatek bypass tool and sp flash tools without using mi auth account using global stock
ombob.my.id
iOussamato_ said:
Can anyone please help me? I did the all steps but nothing works and I get the STATUS_EXT_RAM_EXCEPTION (0xC0050005) error... The only solution I found is to drain the battery while the device is bootlooping but sadly, my phone vibrates 1 second and dies because there is no fastboot or recovery or nothing to boot with, I tried SP Flash Tool but it stucks at Download DA 100% then shows me the ram error. PLEASE HELP ME
P.S: I know people will say MTK Bypass is a virus but please ignore it and focus on my main subject
Click to expand...
Click to collapse
use this video 100% working
Device locked and need test point. You can't use MTK bypass and SP Flashtool directly. Your device may have patch on July 2022 and newest version (12.5.3 and above).
And if you see 3 dot pin for TP, it's Redmi 9c but if you found only 1 point (for TP), it's Redmi 9c NFC.
Remember to use TP for any operation and if not work, TP with Professional software.
demoimoet said:
Device locked and need test point. You can't use MTK bypass and SP Flashtool directly. Your device may have patch on July 2022 and newest version (12.5.3 and above).
And if you see 3 dot pin for TP, it's Redmi 9c but if you found only 1 point (for TP), it's Redmi 9c NFC.
Remember to use TP for any operation and if not work, TP with Professional software.
Click to expand...
Click to collapse
where are test points located?
Exact same issue,
exact same error,
exact everything.
I ended up flashing using KERDISH Team's SP Flash Tool BUT it still does not wanna boot
When I press the combination to boot into fastboot it vibrates but and shows a screen for a split second.
When I try to boot it up normally it just shows again a screen for a split seccond
And when I try to boot into recovery using again the combination it shows AGAIN the screen for a split secconds
Any help appriciated!
ax0 said:
Exact same issue,
exact same error,
exact everything.
I ended up flashing using KERDISH Team's SP Flash Tool BUT it still does not wanna boot
When I press the combination to boot into fastboot it vibrates but and shows a screen for a split second.
When I try to boot it up normally it just shows again a screen for a split seccond
And when I try to boot into recovery using again the combination it shows AGAIN the screen for a split secconds
Any help appriciated!
Click to expand...
Click to collapse
did you try Yurian's post info, my phone was totally bricked and thats what kinda worked, I left extensive guides on how I did it on there too
also, here are the files that worked for me (redmi 9a, not the exact same but its pretty similar)
your ROMs should be these (use the fastboot one, to the best of my knoledge, the recovery one only changes the recovery hence, its useles to unbrick) if that doesnt work try ROMs for different regions or a one previous version (I dont recomend this because MI is super against downgrading so they f-up your phone if you try) always with the fastboot one
the scatter should be on ROM/images
if that scatter doesnt work, try the ones I provided, theyre for a different version but hey, in for a pound, if its already hard bricked you may as well try crazy stuff, I would suggest you look for the correct scatters online, but I have some slight experience looking for android files and I couldnt find any that are the correct ones.
Lastly, Im just a nobody that unbricked his device and got a little confident, I know next to nothing about phone config, that said, I do think I know more than most but I dont know if scatter files are completely imposible to be compatible between versions or even the ROMs, most Custom ROM work in both 9a and 9c so I think they might, but IDK.
Ivan.Adriazola said:
did you try Yurian's post info, my phone was totally bricked and thats what kinda worked, I left extensive guides on how I did it on there too
also, here are the files that worked for me (redmi 9a, not the exact same but its pretty similar)
your ROMs should be these (use the fastboot one, to the best of my knoledge, the recovery one only changes the recovery hence, its useles to unbrick) if that doesnt work try ROMs for different regions or a one previous version (I dont recomend this because MI is super against downgrading so they f-up your phone if you try) always with the fastboot one
View attachment 5859871
the scatter should be on ROM/images
if that scatter doesnt work, try the ones I provided, theyre for a different version but hey, in for a pound, if its already hard bricked you may as well try crazy stuff, I would suggest you look for the correct scatters online, but I have some slight experience looking for android files and I couldnt find any that are the correct ones.
Lastly, Im just a nobody that unbricked his device and got a little confident, I know next to nothing about phone config, that said, I do think I know more than most but I dont know if scatter files are completely imposible to be compatible between versions or even the ROMs, most Custom ROM work in both 9a and 9c so I think they might, but IDK.
Click to expand...
Click to collapse
Hello! Thanks so much for replying
I still get the same issue, it just shows a screen for a split secconds and then turns off
if you wan
ax0 said:
Hello! Thanks so much for replying
I still get the same issue, it just shows a screen for a split secconds and then turns off
Click to expand...
Click to collapse
t to some day we could hop on a discord call and see if I can help you in any way, although I doubt it since our hardwares arent exactly the same
Ivan.Adriazola said:
if you wan
t to some day we could hop on a discord call and see if I can help you in any way, although I doubt it since our hardwares arent exactly the same
Click to expand...
Click to collapse
sure my discord is axon#7061
same problem but fixed,try tft free tool.here are the steps.
1.remove battery connection,do not connect untill flashed
2.open tft tool,go to mtk section flash scatter
3.connect mobile while holding both volume bouttons
4.now tft tool starts flashing but failed & rebooting device
5.now remove cable & connect battery,bootup
Hoping this should work for you,mine is fixed that way
brav3h3ar8 said:
same problem but fixed,try tft free tool.here are the steps.
1.remove battery connection,do not connect untill flashed
2.open tft tool,go to mtk section flash scatter
3.connect mobile while holding both volume bouttons
4.now tft tool starts flashing but failed & rebooting device
5.now remove cable & connect battery,bootup
Hoping this should work for you,mine is fixed that way
Click to expand...
Click to collapse
thank you so much
idk why but TFT managed to fix it!
ax0 said:
thank you so much
idk why but TFT managed to fix it!
Click to expand...
Click to collapse
It's my pleasure
ax0 said:
sure my discord is axon#7061
Click to expand...
Click to collapse
Hello, please add me, I'm desperate how to do this :-(
ax0 said:
Exact same issue,
exact same error,
exact everything.
I ended up flashing using KERDISH Team's SP Flash Tool BUT it still does not wanna boot
When I press the combination to boot into fastboot it vibrates but and shows a screen for a split second.
When I try to boot it up normally it just shows again a screen for a split seccond
And when I try to boot into recovery using again the combination it shows AGAIN the screen for a split secconds
Any help appriciated!
Click to expand...
Click to collapse
Hi,
Just follow the steps and you'll be good.
[Guide] How to unbrick redmi 9C by flashing with SP Tools without Auth file(Tested Working)
This is a last ditch effort to restore your phone to working order. This should only be used if your phone DOES NOT BOOT AT ALL or if you are unable to boot into FASTBOOT. If you can boot into Fastboot mode then I would encourage you to flash...
forum.xda-developers.com
I already tried it with my device and it works well.
Hello everyone!
I hope this is seen, because I need your help, well, days ago I wanted to install the pixel experience rom, everything was going well, but when it was installed, I had problems with wifi, and only worked with mobile data (it should be noted that it was Android 13 and my version is merlin). Well, then I decided to change it and return it to stock rom but it has been a tragedy since then. First, I think that being mediatek, the device does not allow to be flashed with mitool, I've tried everything, install twrp but did not serve and now does not let me enter fastboot, what do you recommend? It could be solved (by myself or a technician), or better I give it as dead? I hope your prompt response
estebg_1300 said:
Hello everyone!
I hope this is seen, because I need your help, well, days ago I wanted to install the pixel experience rom, everything was going well, but when it was installed, I had problems with wifi, and only worked with mobile data (it should be noted that it was Android 13 and my version is merlin). Well, then I decided to change it and return it to stock rom but it has been a tragedy since then. First, I think that being mediatek, the device does not allow to be flashed with mitool, I've tried everything, install twrp but did not serve and now does not let me enter fastboot, what do you recommend? It could be solved (by myself or a technician), or better I give it as dead? I hope your prompt response
Click to expand...
Click to collapse
Miflash works with Qualcomm and Media Tek but for the latter it is better to use
https://xiaomitools.com/sp-flash-tool-en/
The problem is that the phone must be in Fastboot mode.
https://sourceforge.net/projects/recovery-for-xiaomi-devices/files/merlin/
TWRP/O.F A11 et A12
Have you tried with the TWRP of:
Wipe/format data type yes
reboot TWRP
flash a recovery rom
bro, try this one, though it was for redmi 6A.
I think the method there could be tried on other xiaomi phones.
goodluck!
Fix HardBrick Redmi 6A (no recovery and no fastboot, only black screen)Fix without need Authotization stuff
----------------------------------------------------------------------- Finally I could fix my redmi 6A after suffering hardbrick. I couldnot enter to recovery neither to fastboot mode. My redmi 6A just give me a black screen with vibration on...
forum.xda-developers.com
Tajil said:
bro, try this one, though it was for redmi 6A.
I think the method there could be tried on other xiaomi phones.
goodluck!
Fix HardBrick Redmi 6A (no recovery and no fastboot, only black screen)Fix without need Authotization stuff
----------------------------------------------------------------------- Finally I could fix my redmi 6A after suffering hardbrick. I couldnot enter to recovery neither to fastboot mode. My redmi 6A just give me a black screen with vibration on...
forum.xda-developers.com
Click to expand...
Click to collapse
Bro, do you know what to put in download agent, scatter loading file and authenticator file?, it gives me an error
NOSS8 said:
Miflash works with Qualcomm and Media Tek but for the latter it is better to use
https://xiaomitools.com/sp-flash-tool-en/
The problem is that the phone must be in Fastboot mode.
https://sourceforge.net/projects/recovery-for-xiaomi-devices/files/merlin/
TWRP/O.F A11 et A12
Have you tried with the TWRP of:
Wipe/format data type yes
reboot TWRP
flash a recovery rom
Click to expand...
Click to collapse
And how I can flash the recovery rom if my phone doesnt power on, and xiaomi mi tool doesnt recognize too my phone? I cant enter in fastboot and recovery mode, help me please
estebg_1300 said:
And how I can flash the recovery rom if my phone doesnt power on, and xiaomi mi tool doesnt recognize too my phone? I cant enter in fastboot and recovery mode, help me please
Click to expand...
Click to collapse
In the 1st post you say you have installed the TWRP.
See here
https://forum.xda-developers.com/t/recover-from-hard-brick-no-fastboot-or-recovery.4469431/
https://forum.xda-developers.com/t/...otloop-hard-brick-softbrick-solution.4460191/
https://forum.xda-developers.com/t/tool-rom2box-all-in-one-frp-flashing-unlocking-tool.4477349/
NOSS8 said:
En la primera publicación dices que tienes instalado el TWRP.
Mira aquí
https://forum.xda-developers.com/t/recover-from-hard-brick-no-fastboot-or-recovery.4469431/
https://forum.xda-developers.com/t/closed-evergo-100-working-poco-m4-pro-5g-redmi-note-11t-india-miui-all-mediatek-devices-bootloop-hard- ladrillo-softbrick-solution.4460191/
https://forum.xda-developers.com/t/tool-rom2box-all-in-one-frp-flashing-unlocking-tool.4477349/
Click to expand...
Click to collapse
Is there a way that we can talk privately and I can explain better and you can guide me to do the procedure?
estebg_1300 said:
Is there a way that we can talk privately and I can explain better and you can guide me to do the procedure?
Click to expand...
Click to collapse
Sorry but I only have Qualcomm devices.
See with the links above or do some research.
EDIT:
You must install specific drivers to see the phone on the pc.
NOSS8 said:
Sorry but I only have Qualcomm devices.
See with the links above or do some research.
EDIT:
You must install specific drivers to see the phone on the pc.
Click to expand...
Click to collapse
how I do the last that you say?
estebg_1300 said:
how I do the last that you say?
Click to expand...
Click to collapse
I posted some links that might be useful, that's all.
I searched with:
Xiaomi mediatek hard bricked, no fastboot
For example:
https://phonesinnigeria.com/unbrick-hard-bricked-dead-mtk-android-device/
"First connect your phone to your pc, if your pc does not make the sound of usb connection, press the volume key (up or down) on your device till you hear sound on your pc, and also your phone will start vibrating but if it does not vibrate keep on pressing the volume key (up or down) as many times as possible till your phone start vibrating. Then it starts connecting and disconnecting in your pc."
NOSS8 said:
I posted some links that might be useful, that's all.
I searched with:
Xiaomi mediatek hard bricked, no fastboot
For example:
https://phonesinnigeria.com/unbrick-hard-bricked-dead-mtk-android-device/
"First connect your phone to your pc, if your pc does not make the sound of usb connection, press the volume key (up or down) on your device till you hear sound on your pc, and also your phone will start vibrating but if it does not vibrate keep on pressing the volume key (up or down) as many times as possible till your phone start vibrating. Then it starts connecting and disconnecting in your pc."
Click to expand...
Click to collapse
now I get 'the last usb device you connected did not work properly and Windows does not recognize it'.
What should I do now?
estebg_1300 said:
now I get 'the last usb device you connected did not work properly and Windows does not recognize it'.
What should I do now?
Click to expand...
Click to collapse
Maybe change the usb port or install other drivers, but as I told you above, I don't know the tools for MediaTek but it's much easier to restore them for free than the Qualcomm ones.
Do some research on the internet and take the time to fully understand.
NOSS8 said:
Maybe change the usb port or install other drivers, but as I told you above, I don't know the tools for MediaTek but it's much easier to restore them for free than the Qualcomm ones.
Do some research on the internet and take the time to fully understand.
Click to expand...
Click to collapse
and you know anyone that know about mtk and can help me? Thanks btw
estebg_1300 said:
and you know anyone that know about mtk and can help me? Thanks btw
Click to expand...
Click to collapse
See here
https://forum.xda-developers.com/f/redmi-note-9-guides-news-discussion.10961/
Maybe him
VD171
forum.xda-developers.com
download agent (DA), already filled if we use spflash. if not just browse and search inside spflash folder (there 3 to 4 DA file there).
scatter file, you get it from the stock firmware, extract the firmware, check inside the folder. you could directly browser from scatter input to the firmware folder.
auth file, just donload it from the link, extract it and in spflash-- auth file input just browse the file
exactly what I did here, u could do it bro:
Tajil said:
bro, try this one, though it was for redmi 6A.
I think the method there could be tried on other xiaomi phones.
goodluck!
Fix HardBrick Redmi 6A (no recovery and no fastboot, only black screen)Fix without need Authotization stuff
----------------------------------------------------------------------- Finally I could fix my redmi 6A after suffering hardbrick. I couldnot enter to recovery neither to fastboot mode. My redmi 6A just give me a black screen with vibration on...
forum.xda-developers.com
Click to expand...
Click to collapse
Tajil said:
download agent (DA), already filled if we use spflash. if not just browse and search inside spflash folder (there 3 to 4 DA file there).
scatter file, you get it from the stock firmware, extract the firmware, check inside the folder. you could directly browser from scatter input to the firmware folder.
auth file, just donload it from the link, extract it and in spflash-- auth file input just browse the file
Click to expand...
Click to collapse
Thanks, but read and trying translate to spanish for english, this error appears in every time that i try to put the phone in my pc
Tajil said:
exactly what I did here, u could do it bro:
Click to expand...
Click to collapse
usb device is not recognized
the last device you connected to this computer did not work and Windows does not recognize it.' is what appears in the image I sent you
estebg_1300 said:
usb device is not recognized
the last device you connected to this computer did not work and Windows does not recognize it.' is what appears in the image I sent you
Click to expand...
Click to collapse
it maybe driver issues
try installing some driver needed:
-mtk driver
-libusb-win
-xiaomi usb driver
-vcom driver
-etc ...
Tajil said:
it maybe driver issues
try installing some driver needed:
-mtk driver
-libusb-win
-xiaomi usb driver
-vcom driver
-etc ...
Click to expand...
Click to collapse
now I have this problem...
Hi everyone, days ago I posted on the forum that I had a bootloop, I could not enter fastboot or recovery, well, I managed to install the rom by sp flash tool without errors, but now I get the error "nv data is corrupted" as seen in the video that I attach, anyone know of a viable solution? What is free and do not have any other problem and my phone back to normal? Because I can enter fastboot and maybe download or twrp or download pixel experience or a rom, What do you recommend?
Hi there.
I wanted to root a Redmi 10S device. Bootloader was also opened. The flash went during fastboot mode, then after the fastboot reboot command, the device restarted, but it only shows "Redmi" and the word android at the bottom. I tried to access recovery and fastboot mode, but powr+volD only restarts the device and only the Redmi inscription is visible.
I don't know what they call this state in which the device is.
If there is a suitable link on the forum, I would appreciate it.
Hi there!
What did you flash excatly?
I mean, did you flash the whole phone, or just a patched boot image?
Andris85 said:
Hi there.
I wanted to root a Redmi 10S device. Bootloader was also opened. The flash went during fastboot mode, then after the fastboot reboot command, the device restarted, but it only shows "Redmi" and the word android at the bottom. I tried to access recovery and fastboot mode, but powr+volD only restarts the device and only the Redmi inscription is visible.
I don't know what they call this state in which the device is.
If there is a suitable link on the forum, I would appreciate it.
Click to expand...
Click to collapse
reflash stock and done to enter in fastboot mode press power and volD keep presing volD until the phone start in fastboot mode and flash it
gurtnyi said:
Hi there!
What did you flash excatly?
I mean, did you flash the whole phone, or just a patched boot image?
Click to expand...
Click to collapse
Just the boot.ini. but I think this would make fastboot mode work. But it's not working
tutibreaker said:
reflash stock and done to enter in fastboot mode press power and volD keep presing volD until the phone start in fastboot mode and flash it
Click to expand...
Click to collapse
What should I use to reflash? Mi flash? This is the NS
Yes... I probably mixed up the boot file in the downloads folder and not the correct received flash
Click to expand...
Click to collapse
Then, you don't have to flash the whole phone again, just flash back the original image, and try rooting with twrp and magisk zip file (rename the apk file from magisk.apk to magisk.zip, and then flash it in twrp)
If you can't install twrp, or something went wrong, take a full backup from your phone (like using google's backup service, and Miui backup--> it 'll save the backup to internal storage/miui/backup/AllBackup) and then ypu can reflash the phone with mi flash tool, but don't lock the bootloader back, and after flash, you shuold enable oem unlock in developer settings.
One quick question:
Did you enable oem unlocking in developer settings, before trying to flash the modified image?
gurtnyi said:
Then, you don't have to flash the whole phone again, just flash back the original image, and try rooting with twrp and magisk zip file (rename the apk file from magisk.apk to magisk.zip, and then flash it in twrp)
If you can't install twrp, or something went wrong, take a full backup from your phone (like using google's backup service, and Miui backup--> it 'll save the backup to internal storage/miui/backup/AllBackup) and then ypu can reflash the phone with mi flash tool, but don't lock the bootloader back, and after flash, you shuold enable oem unlock in developer settings.
One quick question:
Did you enable oem unlocking in developer settings, before trying to flash the modified image?
Click to expand...
Click to collapse
yepp, enable oem unlock. But fastbootmode is required for all operations. But fastboot mode doesn't work.
What do you mean it doesn't work?
Can't enter into fastboot mode?
gurtnyi said:
What do you mean it doesn't work?
Can't enter into fastboot mode?
Click to expand...
Click to collapse
Can't enter fastboot mode. The device only shows "Redmi" lettering. If fatboot worked, I could have done it already. power+volume down, the device just restarts and shows "redmi".
Hmm..
And if you holding the volD and power buttons together for a longer time?
Like a min, or sth
I had a similar situation, but after a few tries it went into fastboot mode
gurtnyi said:
Hmm..
And if you holding the volD and power buttons together for a longer time?
Like a min, or sth
I had a similar situation, but after a few tries it went into fastboot mode
Click to expand...
Click to collapse
it just restarts, as long as I press and hold volume down+power, if I don't press it, it just shows the redmi text
I apologise, but I 've currently ran out of ideas. If I can find any solution, I 'll post an answer about it.
gurtnyi said:
I apologise, but I 've currently ran out of ideas. If I can find any solution, I 'll post an answer about it.
Click to expand...
Click to collapse
TXH
Hi there the forgive my on my bad english and text.
The Only thing u can do is restoring the firmware by using brom mode, Look it up or follow the steps i'll give u....
First keep in mind brom works best Without the batary conected . So remove the thin cover plate at the back u can loosen it with heat , after removing the cover move all screws and remove the housing so u can disconect the batary at the mainboard .
Next u will have to install the Vcom drivers according your chipset mediatek etc.
For the Vcom drivers and install of it u can follow https://www.hovatek.com/forum/thread-16640.html
U must download or allready have a firmware file in fastboot format , Open up SP Flash tool and go to optionsd and select connection, click the w/o battery option and close it. Open your scatter file and than click on download . Insert your phone wile holding your volume down or up , with my device a redmi note 10s it was the up and down to getter for it was flashing the rom. this should flash your device back with a working fastboot and working rom.
Hope u will succeed...
Greetsss
Pegelaar_NL said:
Hi there the forgive my on my bad english and text.
The Only thing u can do is restoring the firmware by using brom mode, Look it up or follow the steps i'll give u....
First keep in mind brom works best Without the batary conected . So remove the thin cover plate at the back u can loosen it with heat , after removing the cover move all screws and remove the housing so u can disconect the batary at the mainboard .
Next u will have to install the Vcom drivers according your chipset mediatek etc.
For the Vcom drivers and install of it u can follow https://www.hovatek.com/forum/thread-16640.html
U must download or allready have a firmware file in fastboot format , Open up SP Flash tool and go to optionsd and select connection, click the w/o battery option and close it. Open your scatter file and than click on download . Insert your phone wile holding your volume down or up , with my device a redmi note 10s it was the up and down to getter for it was flashing the rom. this should flash your device back with a working fastboot and working rom.
Hope u will succeed...
Greetsss
Click to expand...
Click to collapse
Yep, this guy here 's got the point. If you can't flash with sp flash tool because auth fail, there's a method to bypass it.
You can find the tutorial here: https://www.getdroidtips.com/bypass-mediateks-sp-flash-tool-authentication-protection/
I also got some help from this guy's post, many thanks to him too.
https://forum.xda-developers.com/t/...ad_da_fail-0x7d4-2004-for-mtk-phones.3692259/
Let us know how it's going with it! ;D
I can unbrick the device at any time. There is another problem. An incorrect boot file is probably being copied. After TWRP you will never enter android again. But TWRP also only loads up to the subtitle. I tried a lot of methods. Now I will try google p ex. android and make it root.
But, if someone can recommend a device intended for gaming, but easy to root, then I will buy one
Andris85 said:
I can unbrick the device at any time. There is another problem. An incorrect boot file is probably being copied. After TWRP you will never enter android again. But TWRP also only loads up to the subtitle. I tried a lot of methods. Now I will try google p ex. android and make it root.
But, if someone can recommend a device intended for gaming, but easy to root, then I will buytoday there is a lot of devices for gaming like rog phone and red magic
Click to expand...
Click to collapse
today there is a lot of devices for gaming like rog phone and red magic, but is you are looking for a "gaming phone" in low or mid-range you are just wasting your money
Andris85 said:
I can unbrick the device at any time. There is another problem. An incorrect boot file is probably being copied. After TWRP you will never enter android again. But TWRP also only loads up to the subtitle. I tried a lot of methods. Now I will try google p ex. android and make it root.
But, if someone can recommend a device intended for gaming, but easy to root, then I will buy one
Click to expand...
Click to collapse
There's a tutorial, that helped me installing twrp correctly to this phone, I'll link my post about this.
https://forum.xda-developers.com/t/twrp-on-android-12.4522273/
tutibreaker said:
today there is a lot of devices for gaming like rog phone and red magic, but is you are looking for a "gaming phone" in low or mid-range you are just wasting your money
Click to expand...
Click to collapse
If you can root it easily, then the expensive one is good for me! Normal root was not available for typical gamer phones for years. If I buy something for which root may not be available, then I'm wasting my money...
gurtnyi said:
There's a tutorial, that helped me installing twrp correctly to this phone, I'll link my post about this.
https://forum.xda-developers.com/t/twrp-on-android-12.4522273/
Click to expand...
Click to collapse
I will look today