Question Help Recovering Data From Device with no Display/Touch - Google Pixel 5a

Hi there. My Pixel 5a has a motherboard issue, and needs to be returned to Google for warranty. I am trying to recover my files from the device before I send it in, but I'm having issues. For some reason, even though I have enabled usb debugging and issued commands through this laptop before, it says adb unauthorized when I issue the command "adb devices". So I downloaded my factory image, removed the "-w" from the flash all bat file, and attempted to flash to see if that would fix issue. However, it appears that for some reason I'm missing fastboot d. Here is the screen I get when attempting to flash.
Sending 'bootloader_b' (8762 KB) OKAY [ 0.122s]
Writing 'bootloader_b' (bootloader) Flashing Pack version b9-0.4-7758098
(bootloader) Flashing partition table for Lun = 0
(bootloader) Flashing partition table for Lun = 1
(bootloader) Flashing partition table for Lun = 2
(bootloader) Flashing partition table for Lun = 4
(bootloader) Flashing partition table for Lun = 5
(bootloader) Flashing partition xbl_b
(bootloader) Flashing partition xbl_config_b
(bootloader) Flashing partition aop_b
(bootloader) Flashing partition tz_b
(bootloader) Flashing partition hyp_b
(bootloader) Flashing partition abl_b
(bootloader) Flashing partition keymaster_b
(bootloader) Flashing partition devcfg_b
(bootloader) Flashing partition qupfw_b
(bootloader) Flashing partition uefisecapp_b
(bootloader) Flashing partition featenabler_b
(bootloader) Flashing partition logfs
OKAY [ 0.343s]
Finished. Total time: 0.771s
Rebooting into bootloader OKAY [ 0.029s]
Finished. Total time: 0.056s
Sending 'radio_b' (149780 KB) OKAY [ 0.970s]
Writing 'radio_b' (bootloader) Flashing Pack version SSD:g7250-00161-211008-B-7807492
(bootloader) Flashing partition modem_b
OKAY [ 0.782s]
Finished. Total time: 2.058s
Rebooting into bootloader OKAY [ 0.038s]
Finished. Total time: 0.053s
--------------------------------------------
Bootloader Version...: b9-0.4-7758098
Baseband Version.....: g7250-00161-211008-B-7807492
Serial Number........: 19241JEG503250
--------------------------------------------
extracting android-info.txt (0 MB) to RAM...
Checking 'product' OKAY [ 0.061s]
Checking 'version-bootloader' OKAY [ 0.057s]
Checking 'version-baseband' OKAY [ 0.055s]
Setting current slot to 'b' OKAY [ 0.071s]
extracting boot.img (96 MB) to disk... took 0.384s
archive does not contain 'boot.sig'
Sending 'boot_b' (98304 KB) OKAY [ 0.623s]
Writing 'boot_b' OKAY [ 0.472s]
extracting dtbo.img (16 MB) to disk... took 0.104s
archive does not contain 'dtbo.sig'
Sending 'dtbo_b' (16384 KB) OKAY [ 0.192s]
Writing 'dtbo_b' OKAY [ 0.120s]
archive does not contain 'dt.img'
archive does not contain 'pvmfw.img'
archive does not contain 'recovery.img'
extracting vbmeta.img (0 MB) to disk... took 0.000s
archive does not contain 'vbmeta.sig'
Sending 'vbmeta_b' (8 KB) OKAY [ 0.126s]
Writing 'vbmeta_b' OKAY [ 0.062s]
extracting vbmeta_system.img (0 MB) to disk... took 0.002s
archive does not contain 'vbmeta_system.sig'
Sending 'vbmeta_system_b' (4 KB) OKAY [ 0.122s]
Writing 'vbmeta_system_b' OKAY [ 0.059s]
archive does not contain 'vbmeta_vendor.img'
extracting vendor_boot.img (96 MB) to disk... took 0.536s
archive does not contain 'vendor_boot.sig'
Sending 'vendor_boot_b' (98304 KB) OKAY [ 0.625s]
Writing 'vendor_boot_b' OKAY [ 0.469s]
extracting super_empty.img (0 MB) to disk... took 0.002s
Rebooting into fastboot OKAY [ 0.049s]
< waiting for any device >
And then it hangs there indefinately. The only way I can get out of here is by pressing the power and volume down simutaneously. Then the dialogue adds this line
fastboot: error: Failed to boot into userspace fastboot; one or more components might be unbootable.
Press any key to exit...
Can anyone help me get to a point where I can recover my data? Please, and thanks in advance.

Edit: Was obviously assuming your bootloader is unlocked, but I guess it's not your case if your'e returning your phone to Google.
Experiencing a similar problem. adb unauthorized means you need to approve the adb connection on the android device, which you unfortunately can't.
If you haven't set a password/pin/pattern on your lock screen and your data is not encrypted you can:
1. Reboot to bootloader (Power + volume down for 15-20 seconds)
2. Use fastboot to boot TWRP (Do not flash)
3. Use ADB there
However if you have set a lock screen password/pin/pattern then your data will be encrypted and you wont be able to decrypt it as TWRP does not support encryption/decryption for A12+. What you can probably do is backup your encrypted data partition to your PC (Using the twrp command in shell) and restore it when your phone is back.

danielhatzor said:
Edit: Was obviously assuming your bootloader is unlocked, but I guess it's not your case if your'e returning your phone to Google.
Experiencing a similar problem. adb unauthorized means you need to approve the adb connection on the android device, which you unfortunately can't.
If you haven't set a password/pin/pattern on your lock screen and your data is not encrypted you can:
1. Reboot to bootloader (Power + volume down for 15-20 seconds)
2. Use fastboot to boot TWRP (Do not flash)
3. Use ADB there
However if you have set a lock screen password/pin/pattern then your data will be encrypted and you wont be able to decrypt it as TWRP does not support encryption/decryption for A12+. What you can probably do is backup your encrypted data partition to your PC (Using the twrp command in shell) and restore it when your phone is back.
Click to expand...
Click to collapse
Hi there, thanks for responding. Actually, yes, my bootloader is unlocked. The phone is rooted. I have enabled usb debugging in the past, but for some reason it is still unauthorized. I currently cannot even get the os to boot, but I cannot figure out why because no screen. When I try to flash the factory image, removing the "-w" so my data isn't wiped, the process hangs att the portion where it boots to fastbootd and will not go any further.
I'm going to try to boot into twrp again. I seem to remember that I tried this, but let's see.
If you have any other info or advice, it would be greatly appreciated.
Edit: I just tried to boot into twrp, and I get an error message. It is : (bootloader) boot.img missing cmdline or OS version
I have attached a picture of the command line messages. Maybe someone here can see something that would point to something that would help

Is it possible you flashed an incompatible / corrupted factory image for your phone?
https://www.reddit.com/r/LineageOS/comments/kn257b

Yeah, I just went and double checked, and then reflashed to see. I def have the July barbet image, which is for the 5a, my device. It just won't work.
Google is trying to get me to either take the device to ubreakifix, which when I try tell me that they do not do motherboard issues, or send the device to them, which I am hesitant to do because I feel they are going to wipe the device. Very frustration situation. I've always used nexus/pixel devices becuase of the readily available info on here, but this just doesn't seem to be a popular development device, and I can't seem to find a way. I know there is some command or series of commands that will fix this issue, I just can't seem to find it.
Thank you again for replying and attempting to help. Truly appreciated. Hopefully someone will stumble across this and let me know.

Related

Noob difficulty in flashing stock marshmallow

I'm having some difficulty flashing Marshmallow onto my Nexus 6. It is the first time I am flashing a rom onto this.
I'm running Linux for this. (Mint 17.2) as I ran into trouble with Windows 10 and OSX El Capitan and recognising my device.
I've got the rom unpacked but when I go to flash with flash-all.sh I get an error.
Code:
(bootloader) Data size exceeds download buffer
FAILED (remote failure)
finished. total time: 4.620s
It then dumps me back to the bootloader on the device. I did come across this thread from a while back.
http://forum.xda-developers.com/nexus-6/help/flash-factory-images-flashing-image-t2948624/page3
It hasn't resolved my problem. I've tried following the long method for installing the rom but it isn't working. I can't get the first stage to execute. I don't seem to actually have a file called bootloader.img anywhere. Is that the problem? Is it missing in this rom?
I'm perfectly happy to completely wipe the device. (It is only 3 days old) I just want to get the stock firmware up and running.
spudbynight said:
I'm having some difficulty flashing Marshmallow onto my Nexus 6. It is the first time I am flashing a rom onto this.
I'm running Linux for this. (Mint 17.2) as I ran into trouble with Windows 10 and OSX El Capitan and recognising my device.
I've got the rom unpacked but when I go to flash with flash-all.sh I get an error.
It then dumps me back to the bootloader on the device. I did come across this thread from a while back.
http://forum.xda-developers.com/nexus-6/help/flash-factory-images-flashing-image-t2948624/page3
It hasn't resolved my problem. I've tried following the long method for installing the rom but it isn't working. I can't get the first stage to execute. I don't seem to actually have a file called bootloader.img anywhere. Is that the problem? Is it missing in this rom?
I'm perfectly happy to completely wipe the device. (It is only 3 days old) I just want to get the stock firmware up and running.
Click to expand...
Click to collapse
Looks like your fastboot binary is out of date. Did you get it from the latest sdk?
I've downloaded the SDK, but (yes, noob alert) I can't figure out how to actually install it.
I've downloaded fastboot from the terminal and it says I have the latest version.
OK - I installed the SDK. I followed the instructions here
When attempting to flash it seems to go a little bit further but is still failing.
Code:
target reported max download size of 536870912 bytes
sending 'bootloader' (10387 KB)...
OKAY [ 0.394s]
writing 'bootloader'...
(bootloader) flashing partition ...
(bootloader) This may take a few seconds if a
(bootloader) different partition table is being
(bootloader) flashed since we need to backup
(bootloader) and restore a few partitions
(bootloader) Flashing primary GPT image...
(bootloader) Flashing backup GPT image...
(bootloader) flashing aboot ...
(bootloader) flashing sbl1 ...
(bootloader) flashing rpm ...
(bootloader) flashing tz ...
(bootloader) flashing sdi ...
(bootloader) flashing logo ...
OKAY [ 0.693s]
finished. total time: 1.087s
rebooting into bootloader...
OKAY [ 0.001s]
finished. total time: 0.001s
target reported max download size of 536870912 bytes
sending 'radio' (115487 KB)...
OKAY [ 4.084s]
writing 'radio'...
(bootloader) flashing modem ...
(bootloader) flashing mdm1m9kefs1 ...
(bootloader) flashing mdm1m9kefs2 ...
(bootloader) flashing mdm1m9kefs3 ...
(bootloader) flashing versions ...
OKAY [ 1.555s]
finished. total time: 5.639s
rebooting into bootloader...
OKAY [ 0.001s]
finished. total time: 0.001s
archive does not contain 'boot.sig'
archive does not contain 'recovery.sig'
archive does not contain 'system.sig'
--------------------------------------------
Bootloader Version...: moto-apq8084-71.15
Baseband Version.....: D4.01-9625-05.27+FSG-9625-02.104
Serial Number........: ZX1G425T8L
--------------------------------------------
checking product...
OKAY [ 0.002s]
checking version-bootloader...
OKAY [ 0.002s]
checking version-baseband...
OKAY [ 0.003s]
sending 'boot' (8197 KB)...
OKAY [ 0.269s]
writing 'boot'...
OKAY [ 0.125s]
sending 'recovery' (8915 KB)...
OKAY [ 0.300s]
writing 'recovery'...
OKAY [ 0.133s]
sending 'system' (2043261 KB)...
(bootloader) Data size exceeds download buffer
FAILED (remote failure)
finished. total time: 0.841s
From there I went into the "long way" and flashed the files individually from system.img
I selected recovery and rebooted. I got an Android with a red triangle but held power and volume up. The phone rebooted without me being asked to wipe data/factory reset.
Currently booted up and restoring. How do I check this is stable? I want to make sure I get OTA updates...
So the bootloader and radio worked, then it failed. Is this using the flash-all script?
I'd try extracting the contents of image-shamu-mra58k.zip and flashing each of them manually with fastboot. I've had trouble like that when using the flash-all script.
KnifeSkills said:
So the bootloader and radio worked, then it failed. Is this using the flash-all script?
I'd try extracting the contents of image-shamu-mra58k.zip and flashing each of them manually with fastboot. I've had trouble like that when using the flash-all script.
Click to expand...
Click to collapse
Sorry, I edited my post with an update...
This seems to be working OK now on Marshmallow.
How do I ensure I get OTA updates from here? Do I need to lock the bootloader again?
spudbynight said:
This seems to be working OK now on Marshmallow.
How do I ensure I get OTA updates from here? Do I need to lock the bootloader again?
Click to expand...
Click to collapse
Nope. Just stay 100% stock. No root, no mods.
Cheers

Device Locked in fastboot even with unlocked bootloader

Hi,
I was trying to reflash everything on my phone and wipe. When I boot into fastboot and run fastboot -w, I get an error saying Download is not allowed on locked device. Im using platform tools 29.05.
ahsank128 said:
Hi,
I was trying to reflash everything on my phone and wipe. When I boot into fastboot and run fastboot -w, I get an error saying Download is not allowed on locked device. Im using platform tools 29.05.
Click to expand...
Click to collapse
Does the bootloader screen show unlocked?
Have you tried to run the flashing unlock again?
Mackay53 said:
Does the bootloader screen show unlocked?
Have you tried to run the flashing unlock again?
Click to expand...
Click to collapse
Okay, so I locked the bootloader, and unlocked it again. Successfully flashed. But I am geting the following message
"Erase successful, but not automatically formatting. File system type raw not supported"
I cant run the fastboot format (partition) command. I am on latest platform tools and latest factory image
ahsank128 said:
Okay, so I locked the bootloader, and unlocked it again. Successfully flashed. But I am geting the following message
"Erase successful, but not automatically formatting. File system type raw not supported"
I cant run the fastboot format (partition) command. I am on latest platform tools and latest factory image
Click to expand...
Click to collapse
Does your phone boot up? If so, I would check to see if your still getting good recognition from your pc. What does adb devices show when you enter that with your phone in transfer data mode?
Badger50 said:
Does your phone boot up? If so, I would check to see if your still getting good recognition from your pc. What does adb devices show when you enter that with your phone in transfer data mode?
Click to expand...
Click to collapse
Yes, the factory image gets flashed, but now everything seems to be on partition B as opposed to A. I believe everything was going to A when I first got the phone and did the unlock. ADB working fine, managed to root the phone. i enter ADB devices and shows serial. I can boot to fastboot. I wanted to see what would happen if I run fastboot flashing unlock again, and it said device is unlocked
ahsank128 said:
Yes, the factory image gets flashed, but now everything seems to be on partition B as opposed to A. I believe everything was going to A when I first got the phone and did the unlock. ADB working fine, managed to root the phone. i enter ADB devices and shows serial. I can boot to fastboot. I wanted to see what would happen if I run fastboot flashing unlock again, and it said device is unlocked
Click to expand...
Click to collapse
Well, then I guess all is well for you again. Just FYI going forward, when you fastboot the factory image without the -w, it only flashes to your active slot, whereas, if you leave the -w, it'll flash to both slots, but wipe your device. This is why when I update the factory images every month without the -w, I manually change slots so I get a full flash to both slots. Many think this is overkill, however, I have never had any wonky problems for the last 2+ years with my P2XL, and now my P4XL by using this methodology :good:
Badger50 said:
Well, then I guess all is well for you again. Just FYI going forward, when you fastboot the factory image without the -w, it only flashes to your active slot, whereas, if you leave the -w, it'll flash to both slots, but wipe your device. This is why when I update the factory images every month without the -w, I manually change slots so I get a full flash to both slots. Many think this is overkill, however, I have never had any wonky problems for the last 2+ years with my P2XL, and now my P4XL by using this methodology :good:
Click to expand...
Click to collapse
Right, but the thing is I left the -w in the bat file. Even so it only flashed to b, saying device is locked. I think there is some internal issue going. Im the same guy who cant get the blackenedmod script to run properly lol
ahsank128 said:
Right, but the thing is I left the -w in the bat file. Even so it only flashed to b, saying device is locked. I think there is some internal issue going. Im the same guy who cant get the blackenedmod script to run properly lol
Click to expand...
Click to collapse
I know who you are? At least your up and running again. But yeah, sounds like your internals might be a little wonky for sure. ?
Badger50 said:
I know who you are At least your up and running again. But yeah, sounds like your internals might be a little wonky for sure. ?
Click to expand...
Click to collapse
Any idea on the best way to completely wipe the internals and flash again? This would be easy with TWRP or custom recovery, but we've some time before that is made for Android10
ahsank128 said:
Any idea on the best way to completely wipe the internals and flash again? This would be easy with TWRP or custom recovery, but we've some time before that is made for Android10
Click to expand...
Click to collapse
Personally, I would factory reset from stock recovery, and then fastboot the factory image with the -w included. In essence, wiping everything twice :good:
Badger50 said:
Personally, I would factory reset from stock recovery, and then fastboot the factory image with the -w included. In essence, wiping everything twice :good:
Click to expand...
Click to collapse
Will attempt this, my attempt last night was to do factory reset within the settings (when phone is booted up) and then flashed with -w. But I will try again using the stock recovery. I even changed computers, this stuff is wonky sometimes
Badger50 said:
Personally, I would factory reset from stock recovery, and then fastboot the factory image with the -w included. In essence, wiping everything twice :good:
Click to expand...
Click to collapse
Code:
C:\Users\akhan37\Downloads\platform-tools_r29.0.5-windows\platform-tools>fastboot -w
Erasing 'userdata' OKAY [ 5.477s]
Erase successful, but not automatically formatting.
File system type raw not supported.
Erasing 'metadata' OKAY [ 0.203s]
Erase successful, but not automatically formatting.
File system type raw not supported.
Finished. Total time: 6.178s
Also, hitting adb reboot fastboot takes to to fastbootd screen but I can't flash there (where I get the message can't write to locked device), but I can use flash-all bat from the bootloader screen.
Code:
Sending 'bootloader_b' (8761 KB) OKAY [ 0.349s]
Writing 'bootloader_b' (bootloader) Flashing Pack version c2f2-0.2-5940465
(bootloader) Flashing partition table for Lun = 0
(bootloader) Flashing partition table for Lun = 1
(bootloader) Flashing partition table for Lun = 2
(bootloader) Flashing partition table for Lun = 4
(bootloader) Flashing partition table for Lun = 5
(bootloader) Flashing partition xbl_b
(bootloader) Flashing partition xbl_config_b
(bootloader) Flashing partition aop_b
(bootloader) Flashing partition tz_b
(bootloader) Flashing partition hyp_b
(bootloader) Flashing partition abl_b
(bootloader) Flashing partition keymaster_b
(bootloader) Flashing partition devcfg_b
(bootloader) Flashing partition qupfw_b
(bootloader) Flashing partition uefisecapp_b
(bootloader) Flashing partition msadp_b
(bootloader) Flashing partition logfs
OKAY [ 0.435s]
Finished. Total time: 1.046s
Rebooting into bootloader OKAY [ 0.049s]
Finished. Total time: 0.050s
Sending 'radio_b' (82676 KB)
DELETED
ahsank128 said:
Also, hitting adb reboot fastboot takes to to fastbootd screen but I can't flash there (where I get the message can't write to locked device), but I can use flash-all bat from the bootloader screen.
Click to expand...
Click to collapse
Interesting. Just a simple experiment if your willing. Go into your platform-tools, and just double click the flash-all.bat file and see if you get the same result, or if it even initializes
ahsank128 said:
Code:
C:\Users\akhan37\Downloads\platform-tools_r29.0.5-windows\platform-tools>fastboot -w
Erasing 'userdata' OKAY [ 5.477s]
Erase successful, but not automatically formatting.
File system type raw not supported.
Erasing 'metadata' OKAY [ 0.203s]
Erase successful, but not automatically formatting.
File system type raw not supported.
Finished. Total time: 6.178s
Also, hitting adb reboot fastboot takes to to fastbootd screen but I can't flash there (where I get the message can't write to locked device), but I can use flash-all bat from the bootloader screen.
Code:
Sending 'bootloader_b' (8761 KB) OKAY [ 0.349s]
Writing 'bootloader_b' (bootloader) Flashing Pack version c2f2-0.2-5940465
(bootloader) Flashing partition table for Lun = 0
(bootloader) Flashing partition table for Lun = 1
(bootloader) Flashing partition table for Lun = 2
(bootloader) Flashing partition table for Lun = 4
(bootloader) Flashing partition table for Lun = 5
(bootloader) Flashing partition xbl_b
(bootloader) Flashing partition xbl_config_b
(bootloader) Flashing partition aop_b
(bootloader) Flashing partition tz_b
(bootloader) Flashing partition hyp_b
(bootloader) Flashing partition abl_b
(bootloader) Flashing partition keymaster_b
(bootloader) Flashing partition devcfg_b
(bootloader) Flashing partition qupfw_b
(bootloader) Flashing partition uefisecapp_b
(bootloader) Flashing partition msadp_b
(bootloader) Flashing partition logfs
OKAY [ 0.435s]
Finished. Total time: 1.046s
Rebooting into bootloader OKAY [ 0.049s]
Finished. Total time: 0.050s
Sending 'radio_b' (82676 KB)
Click to expand...
Click to collapse
If you have done a factory reset, you also need to make sure you enable "oem unlocking" in Developer options and usb debugging before you do anything else. Flashing a factory stock image which includes the '-w' in your flash-all.bat file would come afterwards.
I am assuming you are not flashing any kernals on top? Check to make sure you are flashing the correct image, Nov and December had 3 different images each month.
Badger50 said:
Interesting. Just a simple experiment if your willing. Go into your platform-tools, and just double click the flash-all.bat file and see if you get the same result, or if it even initializes
Click to expand...
Click to collapse
Wont work from home screen (this is fine? should be in fastboot)
Looks like it flashed this time from the fastbootd screen (so damn strange)
from fastbootd screen:
Code:
Sending 'bootloader' (8761 KB) OKAY [ 0.218s]
Writing 'bootloader' FAILED (remote: 'No such file or directory')
fastboot: error: Command failed
Rebooting into bootloader OKAY [ 0.003s]
Finished. Total time: 0.004s
Sending 'radio_b' (82676 KB) OKAY [ 2.180s]
Writing 'radio_b' (bootloader) Flashing Pack version SSD:g8150-00041-191016-B-5945070
(bootloader) Flashing partition modem_b
OKAY [ 0.650s]
Finished. Total time: 3.090s
Rebooting into bootloader OKAY [ 0.049s]
Finished. Total time: 0.051s
--------------------------------------------
Bootloader Version...: c2f2-0.2-5940465
Baseband Version.....: g8150-00041-191016-B-5945070
Serial Number........: 99171FFAZ006J5
--------------------------------------------
extracting android-info.txt (0 MB) to RAM...
Checking 'product' OKAY [ 0.069s]
Checking 'version-bootloader' OKAY [ 0.069s]
Checking 'version-baseband' OKAY [ 0.068s]
Setting current slot to 'b' OKAY [ 0.077s]
extracting boot.img (64 MB) to disk... took 0.387s
archive does not contain 'boot.sig'
Sending 'boot_b' (65536 KB) OKAY [ 2.139s]
Writing 'boot_b' OKAY [ 0.455s]
extracting dtbo.img (8 MB) to disk... took 0.025s
archive does not contain 'dtbo.sig'
Sending 'dtbo_b' (8192 KB) OKAY [ 0.310s]
Writing 'dtbo_b' OKAY [ 0.117s]
archive does not contain 'dt.img'
archive does not contain 'recovery.img'
extracting vbmeta.img (0 MB) to disk... took 0.000s
archive does not contain 'vbmeta.sig'
Sending 'vbmeta_b' (8 KB) OKAY [ 0.138s]
Writing 'vbmeta_b' OKAY [ 0.072s]
extracting vbmeta_system.img (0 MB) to disk... took 0.001s
archive does not contain 'vbmeta_system.sig'
Sending 'vbmeta_system_b' (4 KB) OKAY [ 0.101s]
Writing 'vbmeta_system_b' OKAY [ 0.072s]
archive does not contain 'vendor_boot.img'
extracting super_empty.img (0 MB) to disk... took 0.001s
Rebooting into fastboot OKAY [ 0.069s]
< waiting for any device >
Sending 'super' (4 KB) OKAY [ 0.001s]
Updating super partition OKAY [ 0.006s]
Resizing 'product_b' OKAY [ 0.004s]
Resizing 'system_b' OKAY [ 0.004s]
Resizing 'system_a' OKAY [ 0.004s]
Resizing 'vendor_b' OKAY [ 0.005s]
Resizing 'vendor_a' OKAY [ 0.004s]
archive does not contain 'boot_other.img'
archive does not contain 'odm.img'
extracting product.img (2127 MB) to disk... took 15.801s
archive does not contain 'product.sig'
Resizing 'product_b' OKAY [ 0.005s]
and got stuck there
One more thing: When on stock boot image, OEM Unlock frozen on bootloader already unlock. But after flashing magsik, I can switch between allow and not allow. This is normal?
bb709394 said:
If you have done a factory reset, you also need to make sure you enable "oem unlocking" in Developer options and usb debugging before you do anything else. Flashing a factory stock image which includes the '-w' in your flash-all.bat file would come afterwards.
I am assuming you are not flashing any kernals on top? Check to make sure you are flashing the correct image, Nov and December had 3 different images each month.
Click to expand...
Click to collapse
No, this issue happens on stock kernel. And yes USB debugging and OEM Unlock both are checked. I believe the image is correct. US Unlocked Pixel from google store. file ends in 011
ahsank128 said:
Wont work from home screen (this is fine? should be in fastboot)
Looks like it flashed this time from the fastbootd screen (so damn strange)
from fastbootd screen:
and got stuck there
One more thing: When on stock boot image, OEM Unlock frozen on bootloader already unlock. But after flashing magsik, I can switch between allow and not allow. This is normal?
Click to expand...
Click to collapse
Yes, it only works in fastboot mode.
I don't think it's strange at all. I've never come across the..fastboot -w..command that you were using, which is why I suggested what I did.
Sometimes it takes a while for the script to finish. You might no have been stuck per-se, but just not patient enough. December was a big update, so it takes a little longer.
Yes, this is normal for OEM unlocking while rooted.
So...are you up and running now?
Badger50 said:
Yes, it only works in fastboot mode.
I don't think it's strange at all. I've never come across the..fastboot -w..command that you were using, which is why I suggested what I did.
Sometimes it takes a while for the script to finish. You might no have been stuck per-se, but just not patient enough. December was a big update, so it takes a little longer.
Yes, this is normal for OEM unlocking while rooted.
So...are you up and running now?
Click to expand...
Click to collapse
I am up and running, I'll check to see if I can get that script running later on
ahsank128 said:
I am up and running, I'll check to see if I can get that script running later on
Click to expand...
Click to collapse
Kinda sounds like you already got the script to work

March 2021 Tmobile Factory Image

Did the march Tmobile factory image come out yet? I'm rooted and can't tell when an update appears. Can we flash-all the MAR 2021 factory image if it doesn't specifically say Mar 2021 Tmobile?...it does for Feb.
Factory Images for Nexus and Pixel Devices | Google Play services | Google for Developers
developers.google.com
trizzv said:
Did the march Tmobile factory image come out yet? I'm rooted and can't tell when an update appears. Can we flash-all the MAR 2021 factory image if it doesn't specifically say Mar 2021 Tmobile?...it does for Feb.
Factory Images for Nexus and Pixel Devices | Google Play services | Google for Developers
developers.google.com
Click to expand...
Click to collapse
Yes it has. The updates are released on the first Monday of the month, which was the 1st this month. This month's update for T-Mobile and every carrier except Virgin Mobile/UK is 11.0.0 (RQ2A.210305.006, Mar 2021)
Add a calendar reminder for every first Monday and this to your favorites to take you right to the redfin (Pixel 5) images: https://developers.google.com/android/images/#redfinimages
JimSmith94 said:
Yes it has. The updates are released on the first Monday of the month, which was the 1st this month. This month's update for T-Mobile and every carrier except Virgin Mobile/UK is 11.0.0 (RQ2A.210305.006, Mar 2021)
Add a calendar reminder for every first Monday and this to your favorites to take you right to the redfin (Pixel 5) images: https://developers.google.com/android/images/#redfinimages
Click to expand...
Click to collapse
Hello PLEASE help! just unzipped the file and removed (-w) from flash-all.bat and executed. stuck in bootloop. keeps going back to Your device is corrupt. it can't be trusted and may not work properly. Am i supposed to extract the image file too before doing flash all?
I can boot into fastboot mode
Sending 'bootloader_a' (8754 KB) OKAY [ 0.316s]
Writing 'bootloader_a' (bootloader) Flashing Pack version r3-0.3-7051238
(bootloader) Flashing partition table for Lun = 0
(bootloader) Flashing partition table for Lun = 1
(bootloader) Flashing partition table for Lun = 2
(bootloader) Flashing partition table for Lun = 4
(bootloader) Flashing partition table for Lun = 5
(bootloader) Flashing partition xbl_a
(bootloader) Flashing partition xbl_config_a
(bootloader) Flashing partition aop_a
(bootloader) Flashing partition tz_a
(bootloader) Flashing partition hyp_a
(bootloader) Flashing partition abl_a
(bootloader) Flashing partition keymaster_a
(bootloader) Flashing partition devcfg_a
(bootloader) Flashing partition qupfw_a
(bootloader) Flashing partition uefisecapp_a
(bootloader) Flashing partition featenabler_a
(bootloader) Flashing partition logfs
OKAY [ 0.449s]
Finished. Total time: 1.033s
Rebooting into bootloader OKAY [ 0.047s]
Finished. Total time: 0.051s
Sending 'radio_a' (149284 KB) OKAY [ 3.540s]
Writing 'radio_a' (bootloader) Flashing Pack version SSD:g7250-00069-210128-B-7108850
(bootloader) Flashing partition modem_a
OKAY [ 0.538s]
Finished. Total time: 4.345s
Rebooting into bootloader OKAY [ 0.056s]
Finished. Total time: 0.061s
--------------------------------------------
Bootloader Version...: r3-0.3-7051238
Baseband Version.....: g7250-00069-210128-B-7108850
Serial Number........: 0A261FDD4001ZG
--------------------------------------------
extracting android-info.txt (0 MB) to RAM...
Checking 'product' OKAY [ 0.066s]
Checking 'version-bootloader' OKAY [ 0.067s]
Checking 'version-baseband' OKAY [ 0.064s]
Setting current slot to 'a' OKAY [ 0.083s]
extracting boot.img (96 MB) to disk... took 0.471s
archive does not contain 'boot.sig'
Sending 'boot_a' (98304 KB) OKAY [ 2.327s]
Writing 'boot_a' OKAY [ 0.306s]
extracting dtbo.img (16 MB) to disk... took 0.069s
archive does not contain 'dtbo.sig'
Sending 'dtbo_a' (16384 KB) OKAY [ 0.477s]
Writing 'dtbo_a' OKAY [ 0.112s]
archive does not contain 'dt.img'
archive does not contain 'recovery.img'
extracting vbmeta.img (0 MB) to disk... took 0.000s
archive does not contain 'vbmeta.sig'
Sending 'vbmeta_a' (8 KB) OKAY [ 0.138s]
Writing 'vbmeta_a' OKAY [ 0.075s]
extracting vbmeta_system.img (0 MB) to disk... took 0.001s
archive does not contain 'vbmeta_system.sig'
Sending 'vbmeta_system_a' (4 KB) OKAY [ 0.138s]
Writing 'vbmeta_system_a' OKAY [ 0.076s]
extracting vendor_boot.img (96 MB) to disk... took 0.291s
archive does not contain 'vendor_boot.sig'
Sending 'vendor_boot_a' (98304 KB) OKAY [ 2.327s]
Writing 'vendor_boot_a' OKAY [ 0.305s]
extracting super_empty.img (0 MB) to disk... took 0.001s
Rebooting into fastboot OKAY [ 0.068s]
< waiting for any device >
this is the error i get when i unzip the image into the same file
i'm trying to just factory reset (by keeping -w) in the flash-all but it is still booting me back into fastbootd right after google logo. How do i fix it?
trizzv said:
i'm trying to just factory reset (by keeping -w) in the flash-all but it is still booting me back into fastbootd right after google logo. How do i fix it?
Click to expand...
Click to collapse
while your device is in fastbootd, open "Windows Device Manager" (Right-click Windows -> Device Manager)
There, you might see your device with an exclamation mark.
Right click your device and choose update driver automatically.

Suddenly hang at the "booting into fastboot" message when flashing.

Hey, I've been searching all through XDA and google to find someone with the same issue, but I can't find it. Plenty of experience flashing/rooting/etc. I've had a Pixel 4XL for a while now, never had an issue with custom roms. But lately I can't get it to take ANY flashes except official OTA sideloads or the online Android Flash Tool. Anytime I try to do a normal ./flash-all.sh it will flash normally UNTIL it hits the "booting into fastboot" (fastbootd) command. Then it will bring up the fastbootd screen and do absolutely nothing no matter how many hours you let it sit there while you resent its existence. Has anyone had experience with this? I'd really appreciate the help. Here is the full read out of my terminal when I flash (I've tried zsh and bash, i've made them executable with chmod +x, and have used them both with sudo and without):
bash-3.2$ sudo -s ./flash-all.sh
Password:
Sending 'bootloader_b' (8845 KB) OKAY [ 0.330s]
Writing 'bootloader_b' (bootloader) Flashing Pack version c2f2-0.4-7617419
(bootloader) Flashing partition table for Lun = 0
(bootloader) Flashing partition table for Lun = 1
(bootloader) Flashing partition table for Lun = 2
(bootloader) Flashing partition table for Lun = 4
(bootloader) Flashing partition table for Lun = 5
(bootloader) Flashing partition xbl_b
(bootloader) Flashing partition xbl_config_b
(bootloader) Flashing partition aop_b
(bootloader) Flashing partition tz_b
(bootloader) Flashing partition hyp_b
(bootloader) Flashing partition abl_b
(bootloader) Flashing partition keymaster_b
(bootloader) Flashing partition devcfg_b
(bootloader) Flashing partition qupfw_b
(bootloader) Flashing partition uefisecapp_b
(bootloader) Flashing partition msadp_b
(bootloader) Flashing partition logfs
OKAY [ 0.343s]
Finished. Total time: 0.963s
Rebooting into bootloader OKAY [ 0.080s]
Finished. Total time: 0.080s
Sending 'radio_b' (82708 KB) OKAY [ 2.099s]
Writing 'radio_b' (bootloader) Flashing Pack version SSD:g8150-00111-210817-B-7650554
(bootloader) Flashing partition modem_b
OKAY [ 0.617s]
Finished. Total time: 3.006s
Rebooting into bootloader OKAY [ 0.079s]
Finished. Total time: 0.079s
Erasing 'avb_custom_key' OKAY [ 0.220s]
Finished. Total time: 0.370s
Sending 'avb_custom_key' (1 KB) OKAY [ 0.140s]
Writing 'avb_custom_key' OKAY [ 0.231s]
Finished. Total time: 0.590s
Rebooting into bootloader OKAY [ 0.080s]
Finished. Total time: 0.080s
--------------------------------------------
Bootloader Version...: c2f2-0.4-7617419
Baseband Version.....: g8150-00111-210817-B-7650554
Serial Number........: 9A251FFBA00481
--------------------------------------------
extracting android-info.txt (0 MB) to RAM...
Checking 'product' OKAY [ 0.070s]
Setting current slot to 'b' OKAY [ 0.079s]
extracting boot.img (64 MB) to disk... took 0.224s
archive does not contain 'boot.sig'
Sending 'boot_b' (65536 KB) OKAY [ 1.670s]
Writing 'boot_b' OKAY [ 0.431s]
extracting dtbo.img (8 MB) to disk... took 0.036s
archive does not contain 'dtbo.sig'
Sending 'dtbo_b' (8192 KB) OKAY [ 0.310s]
Writing 'dtbo_b' OKAY [ 0.121s]
archive does not contain 'dt.img'
archive does not contain 'pvmfw.img'
archive does not contain 'recovery.img'
extracting vbmeta.img (0 MB) to disk... took 0.000s
archive does not contain 'vbmeta.sig'
Sending 'vbmeta_b' (4 KB) OKAY [ 0.140s]
Writing 'vbmeta_b' OKAY [ 0.077s]
extracting vbmeta_system.img (0 MB) to disk... took 0.000s
archive does not contain 'vbmeta_system.sig'
Sending 'vbmeta_system_b' (4 KB) OKAY [ 0.140s]
Writing 'vbmeta_system_b' OKAY [ 0.077s]
archive does not contain 'vbmeta_vendor.img'
archive does not contain 'vendor_boot.img'
extracting super_empty.img (0 MB) to disk... took 0.000s
Rebooting into fastboot OKAY [ 0.070s]
I forgot to mention that I've also manually flashed a bunch of bootloaders and boot images to see if would help, but still nothing. Also twrp doesn't load when I boot a twrp img.
ashtonv59 said:
I forgot to mention that I've also manually flashed a bunch of bootloaders and boot images to see if would help, but still nothing. Also twrp doesn't load when I boot a twrp img.
Click to expand...
Click to collapse
I have nothing to offer but the obvious which is to confirm the latest binaries, new data cable (not C-C) and try a different (windows) machine you have adb/fastboot set up on. With an unlocked bootloader, flashing the untouched script/batch file should return ANY device to the OOB state.
v12xke said:
I have nothing to offer but the obvious which is to confirm the latest binaries, new data cable (not C-C) and try a different (windows) machine you have adb/fastboot set up on. With an unlocked bootloader, flashing the untouched script/batch file should return ANY device to the OOB state.
Click to expand...
Click to collapse
I actually figured it out last night. I still don't know the cause of it, but if anyone ever has this issue this is the solution.
Extract the download. Notice there is a ZIP FILE (this is important as it is the userspace data for each partition) within the extracted folder along with the bootloader, radio, flash-all, flash-base, etc. Execute the flash-all script like normal. It will hang like I described. Once fastbootd loads, hit CTRL+C so you have control of your terminal again. Type the command
Code:
fastboot update -w ZIPFILETHATIMENTIONEDEARLIER.ZIP
MAKE SURE YOU TYPE -w, otherwise the phone will hang on the Google logo screen until you turn it off. The reason the phone gives is the "no valid boot slot" message. Anyway, once you hit enter after that command, you'll see it flash each partition, then it boots the system automatically. BOOM you'll be at the setup screen in no time.
I don't know why it hangs. It seems to related to my computer or terminal. I have the newest MacBook Air. But yeah, that's the solution. Happy flashing. I hope this might help people in the future.
Peace out.
@ashtonv59
Glad you got things working. That line is already in the untouched script (and the DOS *.bat file) The -w flag is an instruction to wipe the user data partition. This flag is often removed by users to "dirty flash" or otherwise update without losing their data. For users like me who manually update every single month using the full factory image, it is always removed. Leaving the -w flag in (or using it manually on the command line is used to remedy flashing issues when all else fails and the user is willing to lose all their data.
See below reply.
v12xke said:
@ashtonv59
Glad you got things working. That line is already in the untouched script (and the DOS *.bat file) The -w flag is an instruction to wipe the user data partition. This flag is often removed by users to "dirty flash" or otherwise update without losing their data. For users like me who manually update every single month using the full factory image, it is always removed. Leaving the -w flag in (or using it manually on the command line is used to remedy flashing issues when all else fails and the user is willing to lose all their data.
Click to expand...
Click to collapse
Yeah, the problem though is the script only actually executes the first part, what would be considered flash-base.sh. Since the terminal hangs when it boots to fastbootd, it never executes the the userspace update, let alone the -w variable at the end of the script. So since you have to manually execute
Code:
fastboot update
, you also have to manually add the
Code:
-w
variable in:
Code:
fastboot update -w USERSPACEZIP.zip
, or else you still have a pretty paperweight. It's an easy thing to overlook, but it is absolutely necessary to successfully flash and have a functioning device.

Development [OFFICIAL] BlissRoms 16 [Typhoon] [barbet][Android 13]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
BlissRoms comes with a wide selection of customization options from around the Android community as well as unique options developed by our team. With so many options available, you’ll find it hard not to enjoy the Blissful experience.
Our focus is to bring the Open Source community a quality OS that can run on all your devices as a daily driver, syncing your apps + settings + customization's across all platforms you run Bliss on.
BlissRoms Barbet Download
BlissRoms Fastboot Images
BlissRoms Boot Image
​
Clean Flash (If coming from other Rom's/Stock)
- Download BlissRoms Factory zip
- Reboot to bootloader
- Run flash-all.sh (Linux) and flash-all.bat (Windows)
- Once flashing is complete reboot your device and wait until bliss boots
- #StayBlissful
Dirty Flash (If you where on BlissRom already!)
- Download Recovery boot.img from above download link.
- Reboot to bootloader and flash boot.img via fastboot using following command
Code:
fastboot flash --slot all boot boot.img
- Reboot to recovery
- Select Apply Update -> Apply Update from ADB to flash BlissRom zip and then run following command
Code:
adb sideload blissrom-zipfilename.zip
- Wait till installation is completed.
- Reboot
Wait for Bliss logo to show up....
#StayBlissful
Create Bug Report on our Issues Tracker
BlissRoms Github
BlissRoms Gerrit
Kernel Source
| Website | Blog | Docs
| Facebook | Twitter | Instagram | Telegram Group | Telegram Channel |
If someone wants to donate, please do so via this PayPal link
Thank you for using BlissRoms! And as always: #StayBlissful​
Cool, thank you for your job, finally we have ROM with lots of customization, tomorrow I will install it
jackeagle said:
BlissRoms comes with a wide selection of customization options from around the Android community as well as unique options developed by our team. With so many options available, you’ll find it hard not to enjoy the Blissful experience.
Our focus is to bring the Open Source community a quality OS that can run on all your devices as a daily driver, syncing your apps + settings + customization's across all platforms you run Bliss on.
BlissRoms barbet Download
BlissRoms Factory Image
​Clean Flash (If coming from other Rom's/Stock)
- Download BlissRoms Factory Images
- Download factory tar.gz and extract it and go to extracted folder.
- Reboot to bootloader
- Run flash-all.bat for Windows or flash-all.sh script if you are using Linux OS.
- Once flashing is complete reboot your device and wait until bliss boots
- #StayBlissful
Dirty Flash (If you where on BlissRom already!)
- Download Recovery boot.img from above download link.
- Reboot to bootloader and flash boot.img via fastboot using following command
Code:
fastboot flash --slot all boot boot.img
- Reboot to recovery
- Select Apply Update -> Apply Update from ADB to flash BlissRom zip and then run following command
Code:
adb sideload blissrom-zipfilename.zip
- Wait till installation is completed.
- Reboot and #StayBlissful
Create Bug Report on our Issues Tracker
BlissRoms Github
BlissRoms Gerrit
Kernel Source
| Website | Blog | Facebook | Twitter | Instagram | Telegram Group | Telegram Channel | Docs
If someone wants to donate, please do so via this PayPal link
Thank you for using BlissRoms! And as always: #StayBlissful​
Click to expand...
Click to collapse
Hello, how to install magisk?
i would probably just fastboot boot this twrp https://forum.xda-developers.com/t/recovery-unofficial-twrp-for-barbet.4387057/ then adb sideload the magisk app or rename it to zip then sideload it.
rchris494 said:
i would probably just fastboot boot this twrp https://forum.xda-developers.com/t/recovery-unofficial-twrp-for-barbet.4387057/ then adb sideload the magisk app or rename it to zip then sideload it.
Click to expand...
Click to collapse
Hello, so you mean to flash this ROM using TWRP as dirty flash? I thought use 1st option clean flash, I'm currently on linage os A12.
[email protected] said:
Hello, so you mean to flash this ROM using TWRP as dirty flash? I thought use 1st option clean flash, I'm currently on linage os A12.
Click to expand...
Click to collapse
to flash magisk. after you have installed it, by their method.
rchris494 said:
to flash magisk. after you have installed it, by their method.
Click to expand...
Click to collapse
ok, thank you, I will try
I got error when try to use flash-all.bat
After reboot, it still loading me to linage os
Code:
C:\Tools\Bliss-v15.6-barbet-OFFICIAL-gapps-20220622>flash-all.bat
Sending 'bootloader_b' (8762 KB) OKAY [ 0.321s]
Writing 'bootloader_b' (bootloader) Flashing Pack version b9-0.4-8351079
(bootloader) Flashing partition table for Lun = 0
(bootloader) Flashing partition table for Lun = 1
(bootloader) Flashing partition table for Lun = 2
(bootloader) Flashing partition table for Lun = 4
(bootloader) Flashing partition table for Lun = 5
(bootloader) Flashing partition xbl_b
(bootloader) Flashing partition xbl_config_b
(bootloader) Flashing partition aop_b
(bootloader) Flashing partition tz_b
(bootloader) Flashing partition hyp_b
(bootloader) Flashing partition abl_b
(bootloader) Flashing partition keymaster_b
(bootloader) Flashing partition devcfg_b
(bootloader) Flashing partition qupfw_b
(bootloader) Flashing partition uefisecapp_b
(bootloader) Flashing partition featenabler_b
(bootloader) Flashing partition logfs
OKAY [ 0.455s]
Finished. Total time: 0.971s
rebooting into bootloader OKAY [ 0.050s]
Finished. Total time: 0.050s
< waiting for any device >
Sending 'radio_b' (149796 KB) OKAY [ 3.563s]
Writing 'radio_b' (bootloader) Flashing Pack version SSD:g7250-00202-220422-B-8489468
(bootloader) Flashing partition modem_b
OKAY [ 0.821s]
Finished. Total time: 4.830s
rebooting into bootloader OKAY [ 0.047s]
Finished. Total time: 0.047s
< waiting for any device >
extracting android-info.txt (0 MB) to RAM...
--------------------------------------------
Bootloader Version...: b9-0.4-8351079
Baseband Version.....: g7250-0020
Serial Number........: 17071
--------------------------------------------
Checking product OKAY [ 0.070s]
extracting boot.img (96 MB) to disk... took 0.490s
archive does not contain 'boot.sig'
archive does not contain 'boot_other.img'
extracting dtbo.img (16 MB) to disk... took 0.109s
archive does not contain 'dtbo.sig'
archive does not contain 'dt.img'
archive does not contain 'odm.img'
extracting product.img (1844 MB) to disk... took 14.879s
archive does not contain 'product.sig'
archive does not contain 'product-services.img'
archive does not contain 'recovery.img'
archive does not contain 'super.img'
extracting system.img (991 MB) to disk... took 7.576s
extracting system_other.img (22 MB) to disk... took 0.211s
archive does not contain 'system.sig'
extracting vbmeta.img (0 MB) to disk... took 0.000s
archive does not contain 'vbmeta.sig'
extracting vendor.img (764 MB) to disk... took 6.119s
archive does not contain 'vendor_other.img'
Erase successful, but not automatically formatting.
File system type raw not supported.
Erase successful, but not automatically formatting.
File system type raw not supported.
Sending 'boot_b' (98304 KB) OKAY [ 2.313s]
Writing 'boot_b' OKAY [ 0.494s]
Sending 'dtbo_b' (16384 KB) OKAY [ 0.460s]
Writing 'dtbo_b' OKAY [ 0.133s]
Sending sparse 'product' 1/8 (262140 KB) OKAY [ 6.145s]
Writing sparse 'product' 1/8 FAILED (remote: 'Partition product not found')
Finished. Total time: 44.382s
Press any key to exit...
So I flashed it using 2nd method, by recovery and ADB. Using TWRP it failing, that can't mount some partitions
Code:
C:\Tools>adb sideload Bliss-v15.6-barbet-OFFICIAL-gapps-20220622.zip
* daemon not running; starting now at tcp:5037
* daemon started successfully
serving: 'Bliss-v15.6-barbet-OFFICIAL-gapps-20220622.zip' (~47%) adb: failed to read command: No error
@jackeagle BlissRoms Factory Image fails to install. i originally tried coming from pixel experience. then tried again after a fresh factory wipe. both had the same results. bootloader is unlocked & using platform-tools_r33.0.2-windows. any suggestions?
C:\htc>flash-all.bat
Sending 'bootloader_a' (8762 KB) OKAY [ 0.453s]
Writing 'bootloader_a' (bootloader) Flashing Pack version b9-0.4-8351079
(bootloader) Flashing partition table for Lun = 0
(bootloader) Flashing partition table for Lun = 1
(bootloader) Flashing partition table for Lun = 2
(bootloader) Flashing partition table for Lun = 4
(bootloader) Flashing partition table for Lun = 5
(bootloader) Flashing partition xbl_a
(bootloader) Flashing partition xbl_config_a
(bootloader) Flashing partition aop_a
(bootloader) Flashing partition tz_a
(bootloader) Flashing partition hyp_a
(bootloader) Flashing partition abl_a
(bootloader) Flashing partition keymaster_a
(bootloader) Flashing partition devcfg_a
(bootloader) Flashing partition qupfw_a
(bootloader) Flashing partition uefisecapp_a
(bootloader) Flashing partition featenabler_a
(bootloader) Flashing partition logfs
OKAY [ 0.266s]
Finished. Total time: 0.969s
Rebooting into bootloader OKAY [ 0.047s]
Finished. Total time: 0.047s
Sending 'radio_a' (149796 KB) OKAY [ 5.719s]
Writing 'radio_a' (bootloader) Flashing Pack version SSD:g7250-00202-220422-B-8489468
(bootloader) Flashing partition modem_a
OKAY [ 0.531s]
Finished. Total time: 6.500s
Rebooting into bootloader OKAY [ 0.047s]
Finished. Total time: 0.047s
--------------------------------------------
Bootloader Version...: b9-0.4-8351079
Baseband Version.....: g7250-00202-220422-B-8489468
Serial Number........: 17121JECB0xxxx
--------------------------------------------
extracting android-info.txt (0 MB) to RAM...
Checking 'product' OKAY [ 0.062s]
Setting current slot to 'a' OKAY [ 0.094s]
extracting boot.img (96 MB) to disk... took 0.297s
archive does not contain 'boot.sig'
Sending 'boot_a' (98304 KB) OKAY [ 3.812s]
Writing 'boot_a' OKAY [ 0.313s]
archive does not contain 'init_boot.img'
extracting dtbo.img (16 MB) to disk... took 0.062s
archive does not contain 'dtbo.sig'
Sending 'dtbo_a' (16384 KB) OKAY [ 0.734s]
Writing 'dtbo_a' OKAY [ 0.125s]
archive does not contain 'dt.img'
archive does not contain 'pvmfw.img'
archive does not contain 'recovery.img'
extracting vbmeta.img (0 MB) to disk... took 0.000s
archive does not contain 'vbmeta.sig'
Sending 'vbmeta_a' (8 KB) OKAY [ 0.141s]
Writing 'vbmeta_a' OKAY [ 0.078s]
extracting vbmeta_system.img (0 MB) to disk... took 0.000s
archive does not contain 'vbmeta_system.sig'
Sending 'vbmeta_system_a' (4 KB) OKAY [ 0.141s]
Writing 'vbmeta_system_a' OKAY [ 0.078s]
archive does not contain 'vbmeta_vendor.img'
extracting vendor_boot.img (96 MB) to disk... took 0.250s
archive does not contain 'vendor_boot.sig'
Sending 'vendor_boot_a' (98304 KB) OKAY [ 3.828s]
Writing 'vendor_boot_a' OKAY [ 0.297s]
archive does not contain 'vendor_kernel_boot.img'
extracting super_empty.img (0 MB) to disk... took 0.000s
Rebooting into fastboot OKAY [ 0.062s]
< waiting for any device >
Sending 'super' (4 KB) FAILED (remote: 'Download is not allowed on locked devices')
fastboot: error: Command failed
Press any key to exit...
rchris494 said:
@jackeagle BlissRoms Factory Image fails to install. i originally tried coming from pixel experience. then tried again after a fresh factory wipe. both had the same results. bootloader is unlocked & using platform-tools_r33.0.2-windows. any suggestions?
C:\htc>flash-all.bat
Sending 'bootloader_a' (8762 KB) OKAY [ 0.453s]
Writing 'bootloader_a' (bootloader) Flashing Pack version b9-0.4-8351079
(bootloader) Flashing partition table for Lun = 0
(bootloader) Flashing partition table for Lun = 1
(bootloader) Flashing partition table for Lun = 2
(bootloader) Flashing partition table for Lun = 4
(bootloader) Flashing partition table for Lun = 5
(bootloader) Flashing partition xbl_a
(bootloader) Flashing partition xbl_config_a
(bootloader) Flashing partition aop_a
(bootloader) Flashing partition tz_a
(bootloader) Flashing partition hyp_a
(bootloader) Flashing partition abl_a
(bootloader) Flashing partition keymaster_a
(bootloader) Flashing partition devcfg_a
(bootloader) Flashing partition qupfw_a
(bootloader) Flashing partition uefisecapp_a
(bootloader) Flashing partition featenabler_a
(bootloader) Flashing partition logfs
OKAY [ 0.266s]
Finished. Total time: 0.969s
Rebooting into bootloader OKAY [ 0.047s]
Finished. Total time: 0.047s
Sending 'radio_a' (149796 KB) OKAY [ 5.719s]
Writing 'radio_a' (bootloader) Flashing Pack version SSD:g7250-00202-220422-B-8489468
(bootloader) Flashing partition modem_a
OKAY [ 0.531s]
Finished. Total time: 6.500s
Rebooting into bootloader OKAY [ 0.047s]
Finished. Total time: 0.047s
--------------------------------------------
Bootloader Version...: b9-0.4-8351079
Baseband Version.....: g7250-00202-220422-B-8489468
Serial Number........: 17121JECB0xxxx
--------------------------------------------
extracting android-info.txt (0 MB) to RAM...
Checking 'product' OKAY [ 0.062s]
Setting current slot to 'a' OKAY [ 0.094s]
extracting boot.img (96 MB) to disk... took 0.297s
archive does not contain 'boot.sig'
Sending 'boot_a' (98304 KB) OKAY [ 3.812s]
Writing 'boot_a' OKAY [ 0.313s]
archive does not contain 'init_boot.img'
extracting dtbo.img (16 MB) to disk... took 0.062s
archive does not contain 'dtbo.sig'
Sending 'dtbo_a' (16384 KB) OKAY [ 0.734s]
Writing 'dtbo_a' OKAY [ 0.125s]
archive does not contain 'dt.img'
archive does not contain 'pvmfw.img'
archive does not contain 'recovery.img'
extracting vbmeta.img (0 MB) to disk... took 0.000s
archive does not contain 'vbmeta.sig'
Sending 'vbmeta_a' (8 KB) OKAY [ 0.141s]
Writing 'vbmeta_a' OKAY [ 0.078s]
extracting vbmeta_system.img (0 MB) to disk... took 0.000s
archive does not contain 'vbmeta_system.sig'
Sending 'vbmeta_system_a' (4 KB) OKAY [ 0.141s]
Writing 'vbmeta_system_a' OKAY [ 0.078s]
archive does not contain 'vbmeta_vendor.img'
extracting vendor_boot.img (96 MB) to disk... took 0.250s
archive does not contain 'vendor_boot.sig'
Sending 'vendor_boot_a' (98304 KB) OKAY [ 3.828s]
Writing 'vendor_boot_a' OKAY [ 0.297s]
archive does not contain 'vendor_kernel_boot.img'
extracting super_empty.img (0 MB) to disk... took 0.000s
Rebooting into fastboot OKAY [ 0.062s]
< waiting for any device >
Sending 'super' (4 KB) FAILED (remote: 'Download is not allowed on locked devices')
fastboot: error: Command failed
Press any key to exit...
Click to expand...
Click to collapse
Hi,
The install log says your device bootloader is locked that is why it failed to install. Unlock it properly and try.
[email protected] said:
I got error when try to use flash-all.bat
After reboot, it still loading me to linage os
Code:
C:\Tools\Bliss-v15.6-barbet-OFFICIAL-gapps-20220622>flash-all.bat
Sending 'bootloader_b' (8762 KB) OKAY [ 0.321s]
Writing 'bootloader_b' (bootloader) Flashing Pack version b9-0.4-8351079
(bootloader) Flashing partition table for Lun = 0
(bootloader) Flashing partition table for Lun = 1
(bootloader) Flashing partition table for Lun = 2
(bootloader) Flashing partition table for Lun = 4
(bootloader) Flashing partition table for Lun = 5
(bootloader) Flashing partition xbl_b
(bootloader) Flashing partition xbl_config_b
(bootloader) Flashing partition aop_b
(bootloader) Flashing partition tz_b
(bootloader) Flashing partition hyp_b
(bootloader) Flashing partition abl_b
(bootloader) Flashing partition keymaster_b
(bootloader) Flashing partition devcfg_b
(bootloader) Flashing partition qupfw_b
(bootloader) Flashing partition uefisecapp_b
(bootloader) Flashing partition featenabler_b
(bootloader) Flashing partition logfs
OKAY [ 0.455s]
Finished. Total time: 0.971s
rebooting into bootloader OKAY [ 0.050s]
Finished. Total time: 0.050s
< waiting for any device >
Sending 'radio_b' (149796 KB) OKAY [ 3.563s]
Writing 'radio_b' (bootloader) Flashing Pack version SSD:g7250-00202-220422-B-8489468
(bootloader) Flashing partition modem_b
OKAY [ 0.821s]
Finished. Total time: 4.830s
rebooting into bootloader OKAY [ 0.047s]
Finished. Total time: 0.047s
< waiting for any device >
extracting android-info.txt (0 MB) to RAM...
--------------------------------------------
Bootloader Version...: b9-0.4-8351079
Baseband Version.....: g7250-0020
Serial Number........: 17071
--------------------------------------------
Checking product OKAY [ 0.070s]
extracting boot.img (96 MB) to disk... took 0.490s
archive does not contain 'boot.sig'
archive does not contain 'boot_other.img'
extracting dtbo.img (16 MB) to disk... took 0.109s
archive does not contain 'dtbo.sig'
archive does not contain 'dt.img'
archive does not contain 'odm.img'
extracting product.img (1844 MB) to disk... took 14.879s
archive does not contain 'product.sig'
archive does not contain 'product-services.img'
archive does not contain 'recovery.img'
archive does not contain 'super.img'
extracting system.img (991 MB) to disk... took 7.576s
extracting system_other.img (22 MB) to disk... took 0.211s
archive does not contain 'system.sig'
extracting vbmeta.img (0 MB) to disk... took 0.000s
archive does not contain 'vbmeta.sig'
extracting vendor.img (764 MB) to disk... took 6.119s
archive does not contain 'vendor_other.img'
Erase successful, but not automatically formatting.
File system type raw not supported.
Erase successful, but not automatically formatting.
File system type raw not supported.
Sending 'boot_b' (98304 KB) OKAY [ 2.313s]
Writing 'boot_b' OKAY [ 0.494s]
Sending 'dtbo_b' (16384 KB) OKAY [ 0.460s]
Writing 'dtbo_b' OKAY [ 0.133s]
Sending sparse 'product' 1/8 (262140 KB) OKAY [ 6.145s]
Writing sparse 'product' 1/8 FAILED (remote: 'Partition product not found')
Finished. Total time: 44.382s
Press any key to exit...[/CODE
[QUOTE="rchris494, post: 87076459, member: 4067147"]
[USER=5216756]@jackeagle[/USER] BlissRoms Factory Image fails to install. i originally tried coming from pixel experience. then tried again after a fresh factory wipe. both had the same results. bootloader is unlocked & using platform-tools_r33.0.2-windows. any suggestions?
C:\htc>flash-all.bat
Sending 'bootloader_a' (8762 KB) OKAY [ 0.453s]
Writing 'bootloader_a' (bootloader) Flashing Pack version b9-0.4-8351079
(bootloader) Flashing partition table for Lun = 0
(bootloader) Flashing partition table for Lun = 1
(bootloader) Flashing partition table for Lun = 2
(bootloader) Flashing partition table for Lun = 4
(bootloader) Flashing partition table for Lun = 5
(bootloader) Flashing partition xbl_a
(bootloader) Flashing partition xbl_config_a
(bootloader) Flashing partition aop_a
(bootloader) Flashing partition tz_a
(bootloader) Flashing partition hyp_a
(bootloader) Flashing partition abl_a
(bootloader) Flashing partition keymaster_a
(bootloader) Flashing partition devcfg_a
(bootloader) Flashing partition qupfw_a
(bootloader) Flashing partition uefisecapp_a
(bootloader) Flashing partition featenabler_a
(bootloader) Flashing partition logfs
OKAY [ 0.266s]
Finished. Total time: 0.969s
Rebooting into bootloader OKAY [ 0.047s]
Finished. Total time: 0.047s
Sending 'radio_a' (149796 KB) OKAY [ 5.719s]
Writing 'radio_a' (bootloader) Flashing Pack version SSD:g7250-00202-220422-B-8489468
(bootloader) Flashing partition modem_a
OKAY [ 0.531s]
Finished. Total time: 6.500s
Rebooting into bootloader OKAY [ 0.047s]
Finished. Total time: 0.047s
--------------------------------------------
Bootloader Version...: b9-0.4-8351079
Baseband Version.....: g7250-00202-220422-B-8489468
Serial Number........: 17121JECB0xxxx
--------------------------------------------
extracting android-info.txt (0 MB) to RAM...
Checking 'product' OKAY [ 0.062s]
Setting current slot to 'a' OKAY [ 0.094s]
extracting boot.img (96 MB) to disk... took 0.297s
archive does not contain 'boot.sig'
Sending 'boot_a' (98304 KB) OKAY [ 3.812s]
Writing 'boot_a' OKAY [ 0.313s]
archive does not contain 'init_boot.img'
extracting dtbo.img (16 MB) to disk... took 0.062s
archive does not contain 'dtbo.sig'
Sending 'dtbo_a' (16384 KB) OKAY [ 0.734s]
Writing 'dtbo_a' OKAY [ 0.125s]
archive does not contain 'dt.img'
archive does not contain 'pvmfw.img'
archive does not contain 'recovery.img'
extracting vbmeta.img (0 MB) to disk... took 0.000s
archive does not contain 'vbmeta.sig'
Sending 'vbmeta_a' (8 KB) OKAY [ 0.141s]
Writing 'vbmeta_a' OKAY [ 0.078s]
extracting vbmeta_system.img (0 MB) to disk... took 0.000s
archive does not contain 'vbmeta_system.sig'
Sending 'vbmeta_system_a' (4 KB) OKAY [ 0.141s]
Writing 'vbmeta_system_a' OKAY [ 0.078s]
archive does not contain 'vbmeta_vendor.img'
extracting vendor_boot.img (96 MB) to disk... took 0.250s
archive does not contain 'vendor_boot.sig'
Sending 'vendor_boot_a' (98304 KB) OKAY [ 3.828s]
Writing 'vendor_boot_a' OKAY [ 0.297s]
archive does not contain 'vendor_kernel_boot.img'
extracting super_empty.img (0 MB) to disk... took 0.000s
Rebooting into fastboot OKAY [ 0.062s]
< waiting for any device >
Sending 'super' (4 KB) FAILED (remote: 'Download is not allowed on locked devices')
fastboot: error: Command failed
Press any key to exit...
[/QUOTE]
I got the same error and my bootloader is unlocked. Anyone get this ROM to install and boot?
[/QUOTE]
Click to expand...
Click to collapse
I got the same error and my bootloader is unlocked. Anyone get this ROM to install and boot?
Nevermind, I factory resetted, extracted the boot from payload.bin with payload dumper, flashed that boot to both slots and adb sideloaded the gapps rom in recovery and it works. Couldn't get it to work with method 1, kept saying that my device bootloader is locked which it's not.
jackeagle said:
Hi,
The install log says your device bootloader is locked that is why it failed to install. Unlock it properly and try.
Click to expand...
Click to collapse
my bootloader hasn't been locked in 6 months. i have been hoping around between pixel experience, calyxos and building my own pixel experience. trying to find one where the stupid google text messaging app actually works and my text messages do not disappear or the keyboard. after flashing to many times i have have determined that it is a google problem. the only company i know that doesn't update their base apks when they release an update to their rom.
rchris494 said:
my bootloader hasn't been locked in 6 months. i have been hoping around between pixel experience, calyxos and building my own pixel experience. trying to find one where the stupid google text messaging app actually works and my text messages do not disappear or the keyboard. after flashing to many times i have have determined that it is a google problem. the only company i know that doesn't update their base apks when they release an update to their rom.
Click to expand...
Click to collapse
Sorry and thanks for confirmation this is indeed weird that it does give device is locked error when using factory images. probably something is blocking it. for now i will take down factory image later today so just use method 2.
Will attach boot.img download link in OP
Sorry for all inconvenience caused due to this
Cheers!
jackeagle said:
Sorry and thanks for confirmation this is indeed weird that it does give device is locked error when using factory images. probably something is blocking it. for now i will take down factory image later today so just use method 2.
Will attach boot.img download link in OP
Sorry for all inconvenience caused due to this
Cheers!
Click to expand...
Click to collapse
i figure while i had some time i would test drive your rom. then ran into that error.
i must be having bad lucky. i did fastboot flash --slot all boot boot.img from the downloaded boot.img and it will not boot into the custom boot/recovery. it just keeps booting back into my pixel experience i had loaded. then i tried again after a fresh factory wipe and it goes to the stock recovery. after fastboot flash --slot all boot boot.img
edit: so i did manage to get this rom to install. i had to use twrp and do a factory wipe in twrp then adb sideload the rom. recovery included with the .zip does load and work.
I would like to translate the additional settings into Russian, turn off the "most important" widget turns off only the weather, the day and date remain. Overall good, fast firmware
There is a long unlock after the print, so it was on one of the updates to the stock firmware, then fixed
P. S But the battery holds decently, like)Does the author have a telegram channel? For feedback
jackeagle said:
Sorry and thanks for confirmation this is indeed weird that it does give device is locked error when using factory images. probably something is blocking it. for now i will take down factory image later today so just use method 2.
Will attach boot.img download link in OP
Sorry for all inconvenience caused due to this
Cheers!
Click to expand...
Click to collapse
Hello @jackeagle do you know when will be next build 15.7? I saw that many phones received it.
In any case currently this is best custom ROM for me, ACIP for example not booting, other ROMs have luck of customization
How does a battery life compare to the stock rom?

Categories

Resources