{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
Introduction
LineageOS is a free, community built, aftermarket firmware distribution of Android 13 (T), which is designed to increase performance and reliability over stock Android for your device.
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
Bugs
What's working:
Boot
WiFi
RIL (LTE/CALL/SMS)
Hotspot (2.4Ghz / 5Ghz)
DT2W
FM Radio
Audio Playback
Video Playback
Camera/Camcorder
IR Blaster
GNSS GPS
NFC
USB (ADB, MTP) If MTP not working on Windows, Uninstall HTC drivers.
Sensors
Touch
What's not working:
Bluetooth
Hardware Encryption
SELinux is permissive
You tell me.
Installation instructions
Download the zip(s).
Install a compatible Recovery
--> Partition warnings <--
Perform a NANDroid backup of your current ROM (Optional)
Wipe data & cache partitions of your device (required when coming from stock!).
Flash ROM.
Optional: Install the Google Apps addon package.
Supported models:
Single SIM variants:
Builds are compatible with all M8 single SIM variants (m8ul, m8vzw and m8spr).
Dual SIM variants:
Builds are compatible with all M8 Dual SIM variants (m8dug and m8dwg).
In both cases, all builds are based off the HTC's Android 6.0.1 firmware and kernel with binaries from Android 6.0 GPe.
Downloads
Recovery : Official TWRP
Gapps : BiTGApps
Rom : Download
If you RIL is not working properly with specific variant model, see these posts:
Dual SIM / Sprint H.K
Sources
Device Trees
Kernel Trees
Vendor Trees
Donate
DONATE To Me
Big Thanks
LineageOS Team.
All M8/MSM8974 contributors.
Changelogs
2023/05/29
Updated to Android 13.0.0_r43 with May security patches.
Upstream updates and fixes.
Fixed Bluetooth.
2023/03/26
Updated to Android 13.0.0_r35 with March security patches.
Upstream updates and fixes.
Add some display props.
2022/12/11
Updated to Android 13.0.0_r16 with December security patches.
Upstream updates and fixes.
Fixed RIL.
Switched to Aperture camera app.
2022/09/22
Initial release of LineageOS 20 for M8/M8D.
Screenshots
Amazing !
tarkzim said:
Changelogs
2022/09/22
Initial release of LineageOS 20 for M8/M8D.
Click to expand...
Click to collapse
Ok, so far, this release is stable and very snappy. No bluetooth and no cell service yet but everything works for the most part. Also tested Magisk and that works too. I wasn't able to get the battery percentage to show in the status bar. I also found Gapps for this rom, by BitGapps. Very minimal though. However, apps from the Play Store are not installing. Maybe it's just me or a rom issue, but I wasn't able to install anything from the PS as of yet.
Link for Android 13 Gapps (ARM), in case anyone wants to try.
BitGapps Downloads
Will it slow down with googles suit of apps?
Coming from lineage 17 I've wiped and factory reset clean install via TWRP 3.4.0-1. The device will boot up to setup screen but then reboots to recovery. Am I doing something wrong?
New build released
Updated to Android 13.0.0_r16 with December security patches.
Upstream updates and fixes.
Fixed RIL.
Switched to Aperture camera app.
I wonder what makes you add support for newer and newer versions of Android?
Sports interest?)
Maybe there is an Android version that is the most successful (progressive). Maybe it's worth focusing on it to integrate the native SenseHome shell. Or is it impossible?
I have already switched to LineageOS and back to stock firmware M8 several times. Now version 19.1 is installed, but I'm thinking of going back to Sense again.
NFC does not work in version 19.1. Problems with calls. And Wi-Fi catches the signal worse than the original firmware.
Hi Tarkzim thanks for bringing Android 13 to my M8
Have installed the dec 11 build, runs fine but the keyboard hangs for about a second rather frequently. Have wiped system and cache before installing.
Posting this in the hope that someone finds it helpful. I tested this ROM on a m8_wlv, Hboot 3.19, OS 6.21.605
I can confirm the following:
Calls, SMS and Mobile data work
Phone isn't constantly warm like on the 12 ROM
Phone charges and drains normally
Camera, Wifi, Audio, Video and USB OTG work
GPS works
Multicast DNS (mDNS) address reolution works!
Bluetooth is broken
Occasional display glitches and 'Systemui has stopped' errors
Screenshots:
Have replaced the ROM keyboard with Swiftkey (version 7.1.4.19). That seems to work fine.
It feels the ROM is stable and good enough to start using on a daily basis, were it not for the permissive Selinux. Any chance of changing that into enforcing?
hey! do you think i can install this on Htc one m8 Eye?
Even with this brand new build, I get the dreaded "e1001 failed to update system image"
I flashed the `sense-firmware-img_0p6bimg.zip` firmware image, and reinstalled `twrp-3.7.0_9-0-m8.img`
Is there something else that's needed before I can actually install the latest lineageOS ROM?
I have tried out this ROM and it works better than the stable Android 12 ROM due to it being snappy as soon as I power it on, meanwhile with the 12, it would be very slow when powered on and I would have to wait a bit for the phone to be snappy.
The only issues with this ROM are of course the issues mentioned above such as Bluetooth being broken, Visual glitches and it freezing for a couple of seconds every time which is highly annoying and made me roll back to the 12 ROM.
But all in all, I can't wait for this ROM to be stable at some point! Thanks for the work that you are putting in @tarkzim !
How did you reflash to have the right partition?
The rom is having charging issues for me, my poor htc gets very hot
New build released
Updated to Android 13.0.0_r35 with March security patches.
Upstream updates and fixes.
Add some display props.
Automatic update: There are no updates available.
Need to wait?
Related
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
LineageOS is a free, community built, aftermarket firmware distribution of Android 7.1 (Nougat), which is designed to increase performance and reliability over stock Android for your device..
Code:
#include
/*
Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github RepoAnd if you would like to contribute to LineageOS, please visit out Gerrit Code Review
Device-specific source code:
Device tree
Kernel source
Compatibilitiy Patches:
WebView
Downloads
ROM
RECOVERY
GAPPS
What works?
Wi-Fi
Bluetooth
RIL (Calls, SMS, Mobile Data)
Sensors (Accelerometer, Compass, Light, Proximity, etc.)
Camera
Video (playback & recording)
Audio (playback & recording)
GPS
Everything else not listed under "known issues"
Known Issues
Screenshots and Recents App thumbnails are blank
Runtime storage permission does not fully work (setns kernel patches are not applied, see com.android.cts.appsecurity.PermissionsHostTest#te stInteractiveGrant CTS test. After granting permission, the app will need to be restarted before it sees the new permission.)
Additionally, Dual SIM has the following limitations (once they work):
Both SIMs are always enabled (no way to disable one SIM)
"Receive incoming call while data is enabled" is always enabled
Installation
Make a backup!
If you were on CM 10.1 or a stock ROM prior to 4.2, upgrade to stock 4.2 first.
Install ClockworkMod recovery with SELinux support. Older CWM will result in a "status 7" error.
Reboot into recovery
If you are using a recovery which mounts /system on boot, unmount it before installing
Wipe data if coming from stock or other ROMs (You may get a "status 7" error if you fail to wipe.)
Install the ROM
Optionally install the Google Apps Addon (In Marshmallow, you MUST flash gapps before booting into the system for the first time or else the proper permissions will not be granted resulting in Setup Wizard crash. If you experience the crash, you will need to do a factory reset.)
To upgrade to a newer build, simply flash the zip. There's no need for data wipe or flashing Google Apps again. (However, if you are experiencing strange issues, you may want to try a wipe.)
Credits
LineageOS team
@pawitp for patches
@GhsR for updated device and kernel tree
@omi for feedbacks and testing
XDA:DevDB Information
LineageOS 14.1, ROM for the Samsung Galaxy Grand duos, ROM for the Samsung Galaxy Grand Duos i9082
Contributors
osas514
Source Code: https://github.com/LineageOS
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.0.x
ROM Firmware Required: 4.2.2
Based On: LineageOS
Version Information
Status: Beta
Beta Release Date: 2018-03-27
Created 2017-01-23
Last Updated 2018-03-27
CHANGELOG
Changelog
20170122:
- Initial alpha release
20170130
-Upstream merge
20170226
Based on android 7.1.1_r21
February security patches merged in
Updated CM source
For more changes, track github or gerrit
2017-03-20
Based on android-7.1.1_r25
March security patches merged in
Updated Los source
2017-05-08
Based on android-7.1.2_r8
May Security patches merged in
2017-05-21
Fixed portable hotspot (should be working now)
Black status bar fixed by default
2017-06-06
Added zram support
Upstream merge
2017-06-07
Based on android-7.1.2_r17
June Security patches merged in
2017-07-18
Based on android-7.1.2_r24
July security patches merged in
2017-08-15
Based on android-7.1.2_r29
August security patches merged in
2017-09-14
Fixed blank screenshot and recents app thumbnails. Credits to @saayuj98 for the info and @minkon for testing and confirmation
Revert low ram config flag
2017-10-25
October security patches merged in
Revert low ram config flag
2018-01-25
January security patches merged in
Revert zram(graphics glitches)
Fixed random reboots caused by screenshot and thumbnail fix(hopefully)
2018-03-27
March security patches merged in
Revert screenshot flag(no idea why it's still rebooting)
FAQ
FAQ
Q:Is this rom better than rom A or B?
A: Either use it or gtfo
Q:How to enable root access*
A:Goto settings-about device and tap on build number 7 times to enable developer option.. Goto developer option Root access and select apps and adb
Q: When will the bugs be fixed
A: No ETA
Q: Recommended gapps?
A: Open gapps(pico)
Q:Since screenshot are blank with the default key combo how can i take screenshot?*
A: use this app
Q: Screenshot of rom?
A: Check the screenshot tab on this thread
Awesome! Thanks for all your work, to everyone who involved in this.
INGLÊS
I was expecting a lot of this update, I had seen a short time in the android file host, until I found it strange that you have put the dowload there and have not made a post for it. pardon my English.
Thank you so much dev. I'm still using LOS 13 but soon i will use this
VitorFelipe_Br said:
INGLÊS
I was expecting a lot of this update, I had seen a short time in the android file host, until I found it strange that you have put the dowload there and have not made a post for it. pardon my English.
Click to expand...
Click to collapse
Previous 2 builds have camera and video recording issue and i wanted to fix it before making it available on xda. The last build is fine without the video recording issue and your English is fine.
Thank you •OP• for being our Grand Duos Developer.....All Grand Devs doing their best and bring a new ROMs for us. We appreciate that. :fingers-crossed:
GREAT
Good Job Broo...
ty
In the previous builds I have noticed that play store is showing our device as uncertified device check in the play store settings is it showing the same for this build
USB Tethering and Hotspot Portable
still error, please fix if you have free time, thanks for make this great rom
Awesome work bro??
mantap25 said:
still error, please fix if you have free time, thanks for make this great rom
Click to expand...
Click to collapse
Error?
Great work brother
long live grand
omi9082 said:
Error?
Click to expand...
Click to collapse
yup, i don't have wifi on my home, so i use my phone as wifi hotspot
Thank you so so so much for your hard work @osas514 I was so excited to use this ROM
Sent from my GT-I9082 using XDA-Developers Legacy app
Excellent
Although late to the party... But have been testing all your previous versions and 22nd onward on this build only... as a daily driver...
Haven't faced any issues till now in my kind of daily usage... battery back up is pretty decent... For bugs... Not came across any till now... Thanks dear..:good:
can't download using chrome, it say error due to missing sd card. any fix?
Kursem said:
can't download using chrome, it say error due to missing sd card. any fix?
Click to expand...
Click to collapse
It is listed in known issues.
Fix:
* Allow storage permission in Chrome
* Exit Chrome and clear it from recent app list
* Then open Chrome again and download files
555-0134 said:
It is listed in known issues.
Fix:
* Allow storage permission in Chrome
* Exit Chrome and clear it from recent app list
* Then open Chrome again and download files
Click to expand...
Click to collapse
Whoops, didn't realize that's how you fix it. Thanks, though!
LineageOS 14.1 (Nougat) unofficial builds for the Droid Bionic
LineageOS is a free, community built, aftermarket firmware distribution of Android 7.1 (Nougat), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at any of us for messing up your device, we will laugh at you.
* Collectively, and at the same time.
*/
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit our Gerrit Code Review.
These are WIP builds of porting LineageOS 14.1 to the Droid Bionic (and also other devices using the same device/motorola/omap4-common-infrastructure). They probably won't work, so don't expect too much. Use on your own risk!
Builds:
Current official builds:
https://download.lineageos.org/targa (Droid Bionic)
(When migrating from Lineage unofficial, flash this first (manually mount /data in TWRP before flashing and unmount it afterwards) and then directly flash the new image without rebooting)
Su addon for official builds: [url]http://droid.cs.fau.de/lineage-14.1/addonsu/[/url] (The official addon doesn't currently install on Omap4)
Manual beta builds:
http://droid.cs.fau.de/lineage-14.1/
Changes (only device/family specific, CM base is always synced before build and contains more changes):
2017-06-10:
Hotspot fixed
Security updates
CM base updated
Last build before enabling official builds
2017-05-15:
Security updates
CM base updated
2017-04-11:
Fixed mobile data on Verizon
2017-04-05:
DRM playback fixed
2017-04-04:
Camcorder working, thanks to @Android-Andi (thumbnail picture is still wrong, but recorded video seems fine). This probably also fixed other media-related issues.
CM base updated
2016-11-27:
CM base updated
2016-11-13:
SELinux is enforcing
PackageInstaller works on ext3-based userdata again
2016-11-05:
First build
What's working:
Phone (tested on Verizon and on GSM/UMTS in Europe)
Mobile data
WiFi
GPS
Camera
Video recording
Reboot to recovery
Playback of DRM-protected content
What's not working:
Probably most everything else, including, but not limited to:
HDMI
Data encryption (investigating, needs new unreleased safestrap)
Gapps:
OpenGApps
If you install Gapps after the ROM has been booted for the first time you either need to wipe data or manually delete /data/system/users/0/runtime-permissions.xml and reboot. Without this Gapps will crash constantly. This is due to a new permissions-system introduced in Marshmallow.
Installation:
You need a recovery supporting SELinux
A version of Safestrap (3.75) which supports SELinux can be found here: [url]https://github.com/stargo/android_packages_apps_Safestrap/releases/tag/v3.75[/URL]
A newer version of safestrap which will format userdata as ext4 will be released shortly. You can also just reformat userdata to ext4 in the old Safestrap for now.
Please read the instructions on how to install this version and follow the order of the steps in it.
GSM users:
These versions (both unofficial and official) automatically switch to GSM/UMTS without installing additional patches.
Source / Repositories:
maserati device-support: https://github.com/LineageOS/android_device_motorola_targa/tree/cm-14.1
omap4-common device-support: https://github.com/LineageOS/android_device_motorola_omap4-common/tree/cm-14.1
omap4-common kernel: https://github.com/LineageOS/android_kernel_motorola_omap4-common/tree/cm-14.1
local manifest to build cm-13 for the Motorola Omap4 devices: http://droid.cs.fau.de/lineage-14.1/local_manifest.xml
XDA:DevDB Information
LineageOS 14.1 for Motorola Droid Bionic, ROM for the Motorola Droid Bionic
Contributors
stargo, Hashcode, joojoobee666, Dhacker29
Source Code: [url]https://github.com/CyanogenMod[/URL]
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.0.x
Based On: LineageOS
Version Information
Status: Beta
Beta Release Date: 2017-06-10
Created 2016-11-13
Last Updated 2017-06-23
Resized screenshot running official 20170707 nightly:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I've been using Lineage 14.1 on my Bionic since early May and have been using my Bionic as my daily-driver smartphone with Lineage since the end of June.
The only minor bug I'm finding, and I'm not sure if this is an omap4 device issue or if this is generally how it is on LineageOS no matter what, but the cell carrier isn't showing up as Verizon on mine.
instead, it shows up as "USA-480" pointing to the MNC and possibly not decoding it properly? APN listing is proper. data/phone/4G-LTE all work flawlessly so I'm under the impression this is just a bug someplace, however Data Usage from the status bar pull-down does say "No Service" no matter what.
Other than this and the memory leak which I believe to have been fixed now in the 0707 nightly, I haven't noticed anything that would disrupt usage.
Current Root add-on from the LineageOS Site at https://mirrorbits.lineageos.org/su/addonsu-14.1-arm-signed.zip DOES install on omap4 properly, contrary to the information above.
install via Safestrap TWRP normally.
My recommendation to anyone using this ROM on their Bionic is to make sure you have at least a 32GB MicroSD card installed for storage as onboard storage is slightly limited with safestrap ROM slot partitions the way they are, and if you haven't acquired one already, get one of the third-party 4000mAh extended battery packs with the extended cover. this adds bulk but also makes the phone easier to hold in the hand, aside from some extra juice to make the most of your Nougat-running Bionic for longer.
A bug I've noticed with in the 20170728 ROM and before, if I leave my phone on and use it normally for about a week, it gets to the point that saved images from apps like Discord or pictures taken through either the normal Camera app or OpenCamera are no longer seen in the filesystem until the phone has been rebooted.
Likewise, a bug since the end of May or thereabouts for me has been images in the camera folders (be it OpenCamera or the regular Camera app) tend to show up as 0kb files when accessing the phone in MTP transfer mode. it makes it hard for me as I then have to boot into Safestrap to get pictures off my phone in any reasonable amount of time or quantity.
I've moved on but cannot believe there are ROMs still for bionic
DarkPhazon said:
I've moved on but cannot believe there are ROMs still for bionic
Click to expand...
Click to collapse
Me too. I've moved on as well many years ago. I really miss my droid bionic. I had it rooted, safestrapped and with all the best roms at the time. I didnt' go pass Ice Cream Sandwich. But when I I moved on to Note 3 I didnt look back. I just un rooted my bionic and moved it over to Jelly bean 4.12. But I'm happy to see as well, that there some users still on there and Roms still coming out.
Crossposting this from the Razr/MAXX thread since this is vital information that will save users on Verizon a lot of headaches:
Sudosftw said:
Something I noticed I'm passing along for the sake of the thread, if anyone on Verizon puts their phone in CDMA Auto (PRL) mode and not LTE/CDMA Auto (PRL) mode in the phone testing menu, the data connection immediately becomes a LOT more stable. You're stuck on 3G for data, but the upside is that the data connection no longer cuts out as it moves from 3G/4G/1X/etc. depending on coverage. 3G/1X switching is immediate and works perfectly, but 3G/4G switching seems to do something terrible that makes the connection unstable and causes the "No Service" deal.
4G mode still shows USA-480 instead of Verizon Wireless as the ERI, and that still to this day a year later confuses me. with 3G/1X it ALWAYS shows as Verizon Wireless and connection information shows correct.
I'm going to be crossposting this information in the Bionic and Droid 4 threads as well to help since this is definitely a platform-wide issue. I popped my sim card into my Droid 4 and got the same results.
Click to expand...
Click to collapse
Support has ended.
LineageOS no longer officially supports this device.
You are now officially on your own.
You can find the final builds here: http://droid.cs.fau.de/Official_Lineage_Builds/
or here (MEGA Mirror)
These directories include the ROM files, addonsu package for 14.1, and the weather provider APK if needed.
I'm expecting this information to hit the OP post very soon.
It was a good run. These phones lasted many more years than they were intended to in the wild, and with Verizon killing 3G support for non-VoLTE devices later this year, they will become useless in the United States on their network. They are likely already useless on most others. Their time is up. I suggest anyone at all still holding on with one of these as a daily driver to consider your upgrades very very soon.
Goodbye Moto.
[ROM] Lineage-OS-18.1 [REDMI 4A/5A] [UNIFIED [UNOFFICIAL]
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
#include <std_disclaimer.h>
/*
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
Introduction
LineageOS is a free, community built, aftermarket firmware distribution of Android 10 (Q), which is designed to increase performance and reliability over stock Android for your device.
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
What's working:
Boot
Bluetooth
Camera / Camcorder
Double Tap to Wake
IR Blaster
RIL (LTE/Dual SIM/SMS)
FM Radio
VoLTE
GPS
WiFi
WiFi Hotspot
USB (ADB/MTP/PTP)
Video Playback
Touch
Sensors
SELinux enforcing
What's not working:
You tell me.
Gapps - Nik core or Bit gapps
Clean flash necessary to avoid issues
Installation instructions
Download the zip(s).
Install a compatible Recovery
Perform a NANDroid backup of your current ROM (Optional)
Wipe system, data, cache and vendor partitions
Flash ROM.
Optional: Install the Google Apps addon package.
Optional: Install Magisk for Root.
DOWNLOAD
Kernel Source - https://github.com/Thagoo/platform_kernel_xiaomi_msm8917/tree/r
Device tree source - https://github.com/Thagoo/android_device_xiaomi_rolex
Rom Source - https://github.com/LineageOS
Reserved
how much bandwidth (to download the repo) is required to build this on my system ?
[email protected] said:
how much bandwidth (to download the repo) is required to build this on my system ?
Click to expand...
Click to collapse
Noob's guide to building AOSP from scratch.
So, I have been an Android developer since 2009 (HTC dream), and have been actively "consuming" XDA, custom ROMs and other tweaks. Surprisingly, never tried to build my own ROM from scratch. Recently, something made me want to build the ROM, so...
forum.xda-developers.com
This thread explains better than me
Is this based on kernel 4.9? can i use the trinton kernel with this one?
Thread closed
Threads without proper source are not allowed.
@op: Please pm me when you can provide the necessary.
strongst
Forum Moderator
Thread open again
When coming from stock to this ROM or one of the other Lineage-based ROMs, yours prompts for a pre-boot decryption password and crashes on attempts to encrypt, while the other doesn't, using the apparently included default. That includes upstream TWRP releases.
Any data I could supply to help get FDE working on this? Might be useful for your other 11/R-based ROMs, if this occurs on them, as I haven't checked.
zer0def said:
When coming from stock to this ROM or one of the other Lineage-based ROMs, yours prompts for a pre-boot decryption password and crashes on attempts to encrypt, while the other doesn't, using the apparently included default. That includes upstream TWRP releases.
Any data I could supply to help get FDE working on this? Might be useful for your other 11/R-based ROMs, if this occurs on them, as I haven't checked.
Click to expand...
Click to collapse
You xan flash magisk to avoid and i recommend you to other recoveries which has extended features for orangefox they disable forcencryption
Thago said:
You xan flash magisk to avoid and i recommend you to other recoveries which has extended features for orangefox they disable forcencryption
Click to expand...
Click to collapse
I know, however I actually find forceencryption valuable, in spite of it's shortcomings, and the linked Lineage 17.1 ROM makes it work (and makes TWRP work with it, too). The solution I would be looking for is not to disable, but rather support it.
zer0def said:
I know, however I actually find forceencryption valuable, in spite of it's shortcomings, and the linked Lineage 17.1 ROM makes it work (and makes TWRP work with it, too). The solution I would be looking for is not to disable, but rather support it.
Click to expand...
Click to collapse
Disk encryption is not stable yet on android 11 you should wait untill it get stable or better go with android 10 ROMs
Seems to be squared off in upstream. Since there's no official support for MSM8917, if you're tracking changes from a different device's tree, which device is it?
zer0def said:
Seems to be squared off in upstream. Since there's no official support for MSM8917, if you're tracking changes from a different device's tree, which device is it?
Click to expand...
Click to collapse
CAF
Update 2021 Apr 07
Changelog:
- audio: Update upto LA.UM.9.6.2.r1-03300-89xx.0
- audio: Update mixer_paths from LA.UM.9.6.2.r1-03300-89xx.0
- Switch to New AIDL Power HAL
- Update CarrierConfig from LA.UM.9.6.2.r1-03300-89xx.0
- Fix device manufacturer & model exif value in Camera apps thanks to iusmac for PR
- Set lmkd configuration properties
- Update Power Profile XML
- Configure PSI for low_ram device
- Block some more wakelocks Fixup deepsleep issue
- Rebased kernel
- merge linux-v4.9.264
DOWNLOAD
Any changelog from 08.04.2021 build?
suzver said:
Any changelog from 08.04.2021 build?
Click to expand...
Click to collapse
[ROM] Lineage-OS-18.1 [REDMI 4A/5A] [UNIFIED [UNOFFICIAL
[ROM] Lineage-OS-18.1 [REDMI 4A/5A] [UNIFIED [UNOFFICIAL] #include /* * * We are not responsible for bricked devices, dead SD cards, * thermonuclear war, or you getting fired because the alarm app failed. Please * do some...
forum.xda-developers.com
hi, i've been testing this rom, and i haven't been able to make it work with my sim card. The official rom works fine, and other sim cards from other vendors work fine on this rom.
I tried flashing the official firmware fw_rolex_miui_HM4AGlobal_V10.2.3.0.NCCMIXM_69d07208fd_7.1.zip, but I couldn't get it to work either.
Lineageos 17.1 doesn't work either.
jlneder said:
hi, i've been testing this rom, and i haven't been able to make it work with my sim card. The official rom works fine, and other sim cards from other vendors work fine on this rom.
I tried flashing the official firmware fw_rolex_miui_HM4AGlobal_V10.2.3.0.NCCMIXM_69d07208fd_7.1.zip, but I couldn't get it to work either.
Lineageos 17.1 doesn't work either
jlneder said:
hi, i've been testing this rom, and i haven't been able to make it work with my sim card. The official rom works fine, and other sim cards from other vendors work fine on this rom.
I tried flashing the official firmware fw_rolex_miui_HM4AGlobal_V10.2.3.0.NCCMIXM_69d07208fd_7.1.zip, but I couldn't get it to work either.
Lineageos 17.1 doesn't work either.
Click to expand...
Click to collapse
Click to expand...
Click to collapse
jlneder said:
hi, i've been testing this rom, and i haven't been able to make it work with my sim card. The official rom works fine, and other sim cards from other vendors work fine on this rom.
I tried flashing the official firmware fw_rolex_miui_HM4AGlobal_V10.2.3.0.NCCMIXM_69d07208fd_7.1.zip, but I couldn't get it to work either.
Lineageos 17.1 doesn't work either.
Click to expand...
Click to collapse
Update your recovery to the latest orangefox recovery which has 4.9 kernel
Wipe data vendor system cache and dalvik cache before flashing the rom
Restore perisist backup (look for redmi 4a persist backup if you don't have)
Hi. I've been having a problem with this new build. After a while, after waking up the phone from deep sleep, I can't open any app or phone setting. The apps just stay loading. Programmed tasks like alarms don't work, either. I have to reboot the phone every once a while as a workaround. This problem was also present in Lineage OS 17, but it didn't happen with Thagoo's older LOS 18.1 build on Telegram. Maybe it's due to the new blocked wakelocks?
Thago said:
Update your recovery to the latest orangefox recovery which has 4.9 kernel
Wipe data vendor system cache and dalvik cache before flashing the rom
Restore perisist backup (look for redmi 4a persist backup if you don't have
Click to expand...
Click to collapse
Sorry, I guess It was a hardware problem. I had another xiaomi redmi 4a and it worked there so i just switched phones. Thank you anyway.
Nice job Qcom sir
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
LineageOS is a free, community built, aftermarket firmware distribution of Android 13, which is designed to increase performance and reliability over stock Android for your device.
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
What is working:
- WiFi
- DualSIM, including calls on both SIMs
- Bluetooth
- NFC
- Camera
- Sound
- GPS
- Fingerprint scanner
- Sensors
- SD cards
- Double tap to wake
- Data encryption
- SELinux enforcing
- OTA updates
- Signature spoofing
- Most other basic stuff
Spoiler: Known issues
Known issues:
- VoLTE
Installation guide:
Spoiler: Using Lineage recovery
1. Recommended Samsung firmware version is A705FNXXU5DVK6, but it will work on slightly older versions too.Make sure that the bootloader is unlocked.--
2. Boot the phone into download mode. Flash Lineage recovery through AP button in Odin.Download here. Note: Use TWRP at your own risk! It does not properly support new A13 roms with the latest changes.
Use Lineage recovery for the best experience, otherwise don't complain if your phone bootloops.
--
3. Boot into recovery (Vol+ and Power while USB is plugged into PC) Note: Samsung's OneUI wipes the custom recovery partition and possibly vbmeta while booting so try not to reboot into Android.
--
4. Format data and system in the recovery--
5. Flash the rom in "Apply update" menu. There are 2 ways to install:
On the phone: Copy the zip to a FAT32-formatted microSD card and install it in recovery.
With a PC: Use Minimal ADB on Windows. Open "cmd-here" and type
Code:
adb sideload <rom-file>
where <rom-file> is the filename (drag-and-drop the zip file into cmd window).
--
6. (Optional) Flash add-ons such as Google apps or Magisk in the same way that you flashed the rom.We now have a working ramdisk so newest Magisk works fine ^^
--
7. Reboot and enjoy
Downloads:ROM: lineage-20.0-20230619-UNOFFICIAL-a70q.zipRecovery: lineage-20.0-20230619-recovery-a70q.tar* Lineage 19.1 is still maintained here.
Changelog:
Spoiler: Click to open
20230619:
Full changelogs: https://github.com/rtd1250/a70q_OTA/releases
Like my work? Consider donating
Buy rtd1250 a Coffee. ko-fi.com/rtd1250
Become a supporter of rtd1250 today! ❤️ Ko-fi lets you support the creators you love with no fees on donations.
ko-fi.com
Credits:
* @rttxda @ataberkozen @haky 86
* @Grarak for the original 17.1 trees
* @Simon1511 for his work on Lineage for similar Samsung qcom phones, enabling this project to get this far
* All other Lineage devs
Source code
https://github.com/LineageOS
https://github.com/rtd1250/android_device_samsung_a70q
https://github.com/rtd1250/android_kernel_samsung_sm6150
https://github.com/rtd1250/proprietary_vendor_samsung_a70q
Other info
OS version: Android 13
Linux version: 4.14.190
Recommended firmware: A705FNXXU5DVK6
Build date: 19.06.2023
Screen off fingerprint not working even after enabling it from settings. However, to lineageos 19.1, it was working as expected.
Will look into that, thanks for reporting. You can use DT2W or raise to wake in the meantime
Edit: fixed as of 20221126
Still downloading hope no sleep of death
all good on the a70 (sm-a705mn) for now
thanks for the rom
Great work as always, thanks a lot
New update is now available, with Screen off FOD fixed (make sure you enable it in settings). You might also find that Always on display is turned on by default, it can be turned off with a quick settings tile. You also can update through settings app on the phone.
For OTA updates I recommend Lineage recovery and, if you need root, Lygisk. Don't report bugs with updates if you use Magisk.
Is volte working in this rom?
MarvinMod said:
Is volte working in this rom?
Click to expand...
Click to collapse
Don't expect VoLTE on _any_ rom for a samsung phone, there is no implementation in AOSP. Official devices lack it too. No developer has bothered to do volte so far (and probably won't unless there's a good reason). Other than that, we're pretty much as bugless as we can get currently.
rttxda said:
Don't expect VoLTE on _any_ rom for a samsung phone, there is no implementation in AOSP. Official devices lack it too. No developer has bothered to do volte so far (and probably won't unless there's a good reason). Other than that, we're pretty much as bugless as we can get currently.
Click to expand...
Click to collapse
Thanks, due to needing Volte for calls and texts, now that 3g is shut down, looks like im stuck using stock.
MarvinMod said:
Thanks, due to needing Volte for calls and texts, now that 3g is shut down, looks like im stuck using stock.
Click to expand...
Click to collapse
Apart from that, only thing you could do is use OneUI mods.. volte might happen one day if someone takes the time to reverse engineer it but so far we're out of luck. This is a problem on every samsung device on AOSP, and with other makes, YMMV.
rttxda said:
Apart from that, only thing you could do is use OneUI mods.. volte might happen one day if someone takes the time to reverse engineer it but so far we're out of luck. This is a problem on every samsung device on AOSP, and with other makes, YMMV.
Click to expand...
Click to collapse
It modded with magisk and safety net pass. Debloated and such. I really like los though.
Personally I'd say los is a great experience as long as 3G calls are not a problem, I use it on my daily phone which has no volte either, but at least is maintained officially
(Also in many countries 3G is shut down before 2G so I'm pretty sure 2G can still be used in those)
How to make dual sim work?
Works out of the box if you haven't messed with the efs partition and did a clean flash. You can also try 19.1 just in case.
vendor needs to update
Why? Even the security patch wasn't bumped. It's not so urgent, it was literally released today.
muito obrigado, A70 é muito mais rápido comparado ao LOS 19.1, você tem uma recomendação de kernel?
DiEGo7SiLVa said:
thanks a lot, A70 is much faster compared to LOS 19.1, do you have a kernel recommendation?
Click to expand...
Click to collapse
Use the lineage kernel, it's most stable and has good performance too. Older "mod" kernels will not work with android 13
My phone can't detect sim 2 on OTA builds but in the older builds it does. A705MN/DS.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
Introduction
LineageOS is a free, community built, aftermarket firmware distribution of Android 13 (T), which is designed to increase performance and reliability over stock Android for your device.
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
Bugs
What's working:
Boot
Camera / Camcorder
DT2W
FM Radio
Torch
RIL (DATA/Call/SMS)
WiFi
WiFi Hotspot
USB (ADB/MTP/PTP)
NFC
LED lights
Sensors
GPS
Audio Playback
Video Playback
Touch screen
ExFAT SDCard
What's not working:
Bluetooth
Hardware encryption
SELinux is permissive
You tell me.
Installation instructions
Download the zip(s).
Install a compatible Recovery
Perform a NANDroid backup of your current ROM (Optional)
Wipe system / data / cache partitions
Flash ROM.
Optional: Install the Google Apps addon package.
Optional: Install Magisk for Root.
Supported models:
C6602,C6603,C6606
Downloads
Recovery : Official TWRP
Gapps : BiTGApps
Magisk (Flash under TWRP): Unofficial Flashable APK
Rom : Download
Sources
Device/Kernel/Vendor Tree: Sources
Donate
DONATE To Me
Big Thanks
LineageOS Team.
all fusion3-common / apq8064 contributors.
@ CyberWalkMaN
@ AdrianDC
@ Chippa_a
Changelogs
2023/03/27
Updated to Android 13.0.0_r35 with March security patches.
Upstream updates and fixes.
2022/12/13
Initial release of LineageOS 20.0 for Xperia Z.
Screenshots
I booted without problems, it works but there are too many errors, the interface is constantly crashing, it does not download, the camera does not work, screen recording and taking screenshots do not work, the file manager does not work many more various bugs i will test as new versions come out thanks in advance
Does anyone know how to properly install the new twrp? This topic is dead and the commands from here don't work
[UB][RECOVERY] TWRP v3.2.2 for Xperia Z
WARNING! TWRP builds version 3.2.1-0 and higher are not compatible with Android Lollipop (5.0/5.1.1) due to SELinux rejection OFFICIAL DOWNLOADS FOR YUGA : https://twrp.me/sony/sonyxperiaz.html twrp-3.x.x-x-yuga.img : Official TWRP image How to...
forum.xda-developers.com
After using adb shell dd if=/tmp/twrp.img of=/dev/block/platform/msm_sdcc.1/by-name/FOTAKernel
I have a message that the files were copied correctly but the phone is not able to enter recovery mode. I also can't do it through TWRP app because I don't know why but it kicked out my root access (probably when trying to update magisk).
I am trying to install twrp 3.7.0_9-0 (official twrp app show me this version)
Edit: My bad - missing drivers.... (i forgot because Win11 deleted it)
tarkzim said:
Changelogs
2022/12/13
Initial release of LineageOS 20.0 for Xperia Z.
Click to expand...
Click to collapse
This version does not boot for me, I tried several times in different ways (with gapps, without gapps, with magisk, without magisk, etc.). 19.1 the same. Only 18.1 working fine
@tarkizm any solution?
I obviously can't tell anyone what they can or cannot do with their own time as developers but I personally still think it would have made more sense to just keep Lineage 18.1 alive for as long as Google pushes out updates for Android 11, because on that version everything actually worked well.
感谢大佬的分享,现在还能刷机
New build released
Updated to Android 13.0.0_r35 with March security patches.
Upstream updates and fixes.
em.....Bluetooth cannot turn on
The first version of 2022/12/13 that I tested have bugs like :
- No charging indicator if the power is off.
- The interface is constantly crashing.
- The web browser can't download.
- Some streaming videos become gray, and we must choose high resolution available to see the video normally.
- The interface of an Opera mini like one in this screenshot appears frequently then it will crash after 15 secound. This appears for all version of opera mini I have installed.
After installing the lineage rom, the camera doesn't work, the next day it works fine and I don't know the reason.
The version 13.0.0_r35 is more stable but something need to be fixed:
- The bleutooth still not working.
- No charging indicator if the power is off.
- The video playback haven't grai scale color but now we can't read any local video and local audio from the apps who use video & audio codec from the android system. These apps who doesn't work include mp3 reader, gallery apps, calling ringtone, notification rintone, screen recording, video camera recording and others apps like ES Explorer etc. So to watch videos I use mx players and poweramp to read mp3 because they use theirs codecs, and turn on the phone vibration for Incoming call.
The default web browser can't download.
Overwise, the version 13.0.0_r35 that I have tested for 3 weeks is more fluid than lineage 18 and 19. It's offered good interface and games rendering. The audio output is good and if we use the audio calibrator we will see the difference.
Waiting the stable version, I downgraded to lineage 18.1.
So that the lineage 18.1 does not overheat on my device, I made some changes:
- Install a new keyboard whose size around 15Mb.
- install a google webview size 'between 40Mb and 55Mb, install as system apps by using lucky patcher, root required.
- install an app launcher, because trebuchet consumes a lot of CPU resources, currently I use hyperion hundred five 5Mb found at apkmirror.
This will solve the problem of overheating. The interface become more speed and allow us to run lot of apps like Duolingo, Vidmate , snaptube etc.
Sorry for my bad English because it is not my first language.
this looks great, thanks