Hi all,
I've been searching around and it seems there are many use cases for this, mine specifically is I have a cheap AA screen which I want to display Waze on, but I want the music/audio to go through the cars standard bluetooth stereo system.
When you connect to wireless android auto all audio is routed over wireless to that unit. Is there any way around this?
The unit I bought only has a terrible inbuilt speaker or FM transmitter for audio output, and the quality of both is awful.
Hi. I have the same problem
Short answer, No - Android Auto routes only phone calls over Bluetooth and all other audio is routed through WiFi or USB. This is by design.
Related
Quite a while ago I bought a Sony BT3600U car stero as it was bluetooth enabled so I could stream music from my Kaiser direct to the car speakers.
All was working well until I moved the car stereo to my new car.
Now although it's all paired up fine when I turn on the car stero it just links to the handsfree bluetooth but doesn't automatically go to wireless stereo.
Instead to get the wireless stereo to work I have to go into bluetooth settings click on xplode (which is the car stereo) and then choose set as wireless stereo.
I know from before that I managed to get it to automatically switch to wireless stereo when in range of the partnered car stereo but I can't for the life of me remember how I did it.
Does anyone have any clues?
Sounds to me like it's an issue with the stereo, not the Kaiser.
Perhaps try disabling the handsfree service (for that pair) on the Kaiser? I can't remember exactly if you disable certain services.
cotc2001 said:
Quite a while ago I bought a Sony BT3600U car stero as it was bluetooth enabled so I could stream music from my Kaiser direct to the car speakers.
All was working well until I moved the car stereo to my new car.
Now although it's all paired up fine when I turn on the car stero it just links to the handsfree bluetooth but doesn't automatically go to wireless stereo.
Instead to get the wireless stereo to work I have to go into bluetooth settings click on xplode (which is the car stereo) and then choose set as wireless stereo.
I know from before that I managed to get it to automatically switch to wireless stereo when in range of the partnered car stereo but I can't for the life of me remember how I did it.
Does anyone have any clues?
Click to expand...
Click to collapse
I have an XCarLink and I have the same behaviour which is a bit annoying. I did a bit of searching a while ago but never got anywhere. If there is an (easy) answer to this I would be interested.
Andy
No it's def not the stereo , i've got it working sort of using A2DP toggle but it's not automatic.
Installed A2DP toggle and linked it to the audio manager on the kaiser.
So I just click the play button on my home screen and it kicks in the wireless stereo and launches the audio manager at the same time and it all works.
It's just annoying as I know that before I moved the stereo from my Honda civic to my hyundai Coupe all I had to do was just start audio manager and the wireless stereo kicked in automatically.
I've seen this too; I have a Sony BT5000 (basically the same as the OP), and I've seen it with both Wizard & Kaiser devices.
A bit more testing - expected behaviour?
I went out in the car earlier and had to do the 'set as wireless stereo' trick to get the BT streaming working with the XCarLink. When I switched off the engine and the head unit powered off the headset icon disappeared from the phone (which is normal) indicating there was no connection. I then left the car but left the bluetooth enabled on the phone instead of switching it off as I normally do. When I returned and drove off the partnership was re-established and the headset icon re-appeared and I was able to stream music etc without doing the 'set as wireless stereo' trick.
I tested this a couple of times and the behaviour was the same - i.e. leave BT enabled on the phone but switch on/off the XCarLink (car kit) and the partnership re-establishes each time with Wireless Stereo working. Switch BT off and then back on on the phone and you have to manually select Wireless Stereo.
Is this the expected behaviour or is there a trick to getting this working seamlessly?
Andy
That didnt' work for me. I even did a hard reset on my phone to see if there was something I had installed causing it not to relink.
If I had any hair, i'd be pulling it out by now
It's so frustrating knowing that I had worked it out once before but when it comes to the crunch you can't remember for the life of you how you did it.
Well i've been searching for an answer and found this here
http://forum.xda-developers.com/showthread.php?p=1318542#post1320648
@ debully>
There is a very simple fix to enable the Pioneer to recognise and connect to your phone. You see the Pioneer is searching for a phone or a Smartphone, the Trinity identifies itself as a PPC and so the Pioneer ignores it.
The Class of Device or CoD must be changed so that the Trinity identifies itself as either a phone or Smartphone.
If you change the Dword Data value in.... HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Bluetooth\SY S\COD"
to 5374476 (decimal) and set bluetooth to discoverable in your Trin, you should find that it connects automatically.
It took me 8 months to find this out.
PS. I don't have the problem with not hearing the callers.
Click to expand...
Click to collapse
But it didn't work for me - on the plus side though I did find a really cool mortscript from the same guy which when I plug the kaiser into my car cradle/charger it recognises the car stereo (but doesn't set to "wireless stereo" and automatically loads up my media player
My search continues
EDIT: Ok found that once the initial partnership for wireless stereo is done, if I turn off the radio and turn it back on again, the partnership is lost as usual until I press channel 6 (pause) on my head unit and then it comes back on.
So, I have a new Toyota Avalon with built-in bluetooth. Was wondering if anyone knew of hacks, tricks, tweaks - software or hardware - to permit a2dp to show up when connected through bluetooth. It says HANDSFREE but doesn't show WIRELESS STEREO on my ATT TILT (stock rom).
Anyway to do this?
Also, for anyone with a Toyota and bluetooth, is there any way to get Microsoft Voice Command activated from the steering wheel? On all my external car bluetooth speakers, hitting the call button activates Voice Command. Doesn't do it with the built-in Toyota system...unless I am overlooking something.
BUMP....
Is there someone on the forum with a Toyota and bluetooth?
I am bummed about this...the only way I can stream or play audio is use the AUX jack which is fine EXCEPT it means that the phone cannot be used via the built-in blue tooth...the other party can be heard by the car microphones don't pick up my voice (presumably because the AUX connector somehow hijacks it???!!)
Any help would be appreciated.
freddiemac1 said:
It says HANDSFREE but doesn't show WIRELESS STEREO on my ATT TILT (stock rom).
Click to expand...
Click to collapse
That's what would happen if the car's BT did not support A2DP. My guess would be that your car only supports handsfree.
I'm in the same boat. I have an '07 Sienna and I have been looking for a way to connect AD2P bluetooth. So far, I'm having no luck.
I've thought about mounting my i.tech clip inside the dash to the Aux input. That means I'd have to modify the i.tech to work when power is connected. I would also have figure out a way to use the Aux port directly (with another device) if I wish. It is always something...
The '09 Toyota's support the AD2P.
works for me
so, I am in a '10 toyota. When I get into the car, it will pair up as handsfree, but does not show AD2P initially. For me at least, if I go to the BT tab on the audio screen, and press and hold the play button, it will start playing from the last playlist I was using. The steering wheel seek up seek down work to skip forward and back.
The first time I needed to initiate some music playing on the phone, and then tell the car to connect bluetooth through the BT tab on the audio menu, I think it hides the AD2P unless the phone requests it, and treats it separately from the handsfree connection.
I wish you luck- for short trips, it is great to be able to just sit down in the car, and have the radio play my mp3s without having to muck with my phone or cables.
One of the things that was frustrating on the old X was that driving mode was sort of useless if the device connected to your car Bluetooth. My understanding is that there are two reasons:
1) The primary reason is a2dp. All audio is routing through Bluetooth and unless you car is set to the Bluetooth/aux input, you don't get any of that audio. The phone is sending to the car but the phone doesn't know the car isn't playing it.
2) moto sort of assumed while on Bluetooth in your car, the car is handling everything and you don't need their Assistance.
Thoughts on these? Any way for the features to still work on the new x while on Bluetooth?
Two years later... did you find a solution?
I too am finding it annoying that Moto X won't cut in with an announcement over the car stereo. I've just come from Windows Phone 8.1 and it had no problem doing that. Have you found a solution that works?
I find that it works quite fine. In my phone BT settings, I set my car bluetooth to media only. I set my BT earpiece to calls only. I get all moto drive, Google voice notifications over the car stereo. My phone calls go to the earpiece for privacy. Moto drive still announces calls over the car BT stereo.
Reading the original post, my car stereo is always on BT. I stream music / content through my phone when I'm in the car. I don't use the radio or CD player.
This is my setup:
Aftermarket head unit (IDCORE) connected through AUX to car stereo. AA is connected wireless (S10+, stock) with head unit; there is also car BT connected to mobile; when driving TWO active BT connections: 1, phone - car BT for audio and 2, IDCORE for AA).
And this is my problem:
AUX output (head unit -> car stereo) works, but has a quite annoying (static?) noise. Ground loop isolator is set, everything I can do hardware-wise is done -but the quality of AUX sound is MUCH LESS than it is when using BT phone-car connection (makes sense, Meridian built in system, with fiber optic).
Question:
considering above and that there IS an active phone-car BT audio connection during driving (beside the necessary AA-IDCORE connection) is there a way (software, app, switch?) to route AA sound through the phone-car BT audio connection, instead of the (noisy!) AUX wire?
Rooting of the phone is not an attractive option (due to my company account on the phone) - but I would be interested in any solution; as noise on the AUX output is quite disturbing. Thanks in advance
Have you checked the Bluetooth settings and checked music audio for the connection to the head unit?
Just did it. I CAN route music audio (in my case TuneIn) to BT in the settings of the phone (sounds, separate app sounds setting), but 1, this does not work (no sound over car BT from TuneIn, when using it on AA), 2, this setting can only be set for ONE application at the time (and I also use navigation, news service on AA), 3, the Android Auto app (the one I need?) does not show up in the application list of this setting. Still stuck.
My idea was (but I don't know if it is possible) a nifty app, that FORCES all sound (music, nav, news, etc) from the phone to BT (car), even when using AA.
I've got the same problem, using AA over USB and can't get Viper working because it doesn't stream over Bluetooth.
I have the same request. I have an AA unit attached to an original BMW X5 nav system. I can switch between them by long pressing the MENU button. The problem is that the AA unit can output sound only via audio jack and my car's system has fiber optics. The quality is very poor when compared. Is there anyway in which I can force my Android phone to output AA sound through car's BT? The AA unit has an option to do this for phone calls but unfortunatly not for regular sound (Spotify etc).
Anyone heard of anything related to this? I noticed that in the iPhones there is a setting in the accessibility options to route the audio through bluetooth. But there is nothing similar in AA. I can't believe this feature is not requested more.
Has anyone solved it? I'm struggling with the same thing.
I just ended up buying a BT transmitter which connects to my device's jack audio out and in turn it connects to the car's bt. It is stupid that there is no software solution to such a simple problem. Why can it do it for audio calls but not for music!? Why the iPhone can do it but the all configurable God of a mobile OSes simply can't?
Also, another idiotic thing of AA is that it doesn't allow you to switch the call to speaker or another bt device... in fact nothing happens when I get a call on the actual phone when connected to stupid AA. This is sooooo idiotic. Way to go android...
Aawireless also has a fewture that solves this also
Really? Where? What is it's name? Where do I access this?!
Aawireless: that is a piece of hardware again, isn't it (https://www.aawireless.io/)?
I look for an app/ software to solve this issue, if possible..
Aaahh I thought the reference was to Android Auto Wireless not a 3rd party hardware thing.
Hello i need help please. I have a portable car dvr with android auto and this item have bad sound quality when i connect with aux to my car unit to have sound to my speakers. So my question is if i can with aawireless adapter device or another way send the android auto audio to my car unit with bluetooth. Thanks for help.
Hi. As far as I know, it can be done. You need to look in the settings.