Hi guys. My mi 11 ultra after I deleted root magisk was fine. I reinstalled magisk from fastboot, it would boot, but it said "wait" and wouldn't start. Now I have installed the rom via fastboot update (not first installation) and it does not start. Turns on, but stays on boot loop. Thanks if you help me
cimikyno said:
Hi guys. My mi 11 ultra after I deleted root magisk was fine. I reinstalled magisk from fastboot, it would boot, but it said "wait" and wouldn't start. Now I have installed the rom via fastboot update (not first installation) and it does not start. Turns on, but stays on boot loop. Thanks if you help me
Click to expand...
Click to collapse
if you can enter in fastboot mode use this tool
https://forum.xda-developers.com/t/flash-tool-guide-use-xiaomi-flash-tool.4262425/
NOSS8 said:
if you can enter in fastboot mode use this tool
https://forum.xda-developers.com/t/flash-tool-guide-use-xiaomi-flash-tool.4262425/
Click to expand...
Click to collapse
Thank you. Basically the bank app also detects magisk. Zigote is active and the bank app is marked in the list. Magisk app is also hidden. Despite that, the other banking apps don't see rooting, this bastard app does. The damage I did it to remove the rooting. After I did that, the bank app was still detecting me as rooting. At that point I ran a clean install of the ROM and finally the bank no longer detected rooting. Is there a remedy for rooting and not letting this app detect it?
cimikyno said:
Thank you. Basically the bank app also detects magisk. Zigote is active and the bank app is marked in the list. Magisk app is also hidden. Despite that, the other banking apps don't see rooting, this bastard app does. The damage I did it to remove the rooting. After I did that, the bank app was still detecting me as rooting. At that point I ran a clean install of the ROM and finally the bank no longer detected rooting. Is there a remedy for rooting and not letting this app detect it?
Click to expand...
Click to collapse
Magisk hide in the Magisk app.
or try this rom,better than stock,,safetynet pass without root
Stable
https://xiaomi.eu/community/threads/miui-13-stable-release.64441/
Weekly
https://xiaomi.eu/community/threads/22-9-29.66978/
NOSS8 said:
Magisk hide in the Magisk app.
or try this rom,better than stock,,safetynet pass without root
Stable
https://xiaomi.eu/community/threads/miui-13-stable-release.64441/
Weekly
https://xiaomi.eu/community/threads/22-9-29.66978/
Click to expand...
Click to collapse
Magisk hide in the Magisk app I already wrote that I did, but the app still sees it
what do i need the ROM for? i already have the latest rom taken from that website installed.
cimikyno said:
Magisk hide in the Magisk app I already wrote that I did, but the app still sees it
what do i need the ROM for? i already have the latest rom taken from that website installed.
Click to expand...
Click to collapse
You did not specify which rom you were on, that's why I suggested you try a Xiaomi EU rom with playstore certified without root.
If you really want to root the phone even though it is not necessary, maybe try a beta version of Magisk or another version.
NOSS8 said:
You did not specify which rom you were on, that's why I suggested you try a Xiaomi EU rom with playstore certified without root.
If you really want to root the phone even though it is not necessary, maybe try a beta version of Magisk or another version.
Click to expand...
Click to collapse
Thank you, send me a link, please for another magisk or beta. I have 25.2 versione stable
cimikyno said:
Thank you, send me a link, please for another magisk or beta. I have 25.2 versione stable
Click to expand...
Click to collapse
https://magiskmanager.com/magisk-beta/
NOSS8 said:
https://magiskmanager.com/magisk-beta/
Click to expand...
Click to collapse
thanks, i have installed the beta version, but i believe it is the same stable version. however, nothing has changed, because the bank's app detects rooting. I don't know what kind of control he does. all other bank apps do not detect the root, this one does
cimikyno said:
thanks, i have installed the beta version, but i believe it is the same stable version. however, nothing has changed, because the bank's app detects rooting. I don't know what kind of control he does. all other bank apps do not detect the root, this one does
Click to expand...
Click to collapse
Ok, but why rooting?
did you try to switch to the Canary release channel in the Magisk app settings and then update the app
try shamiko module as well. Tell me which banking app, I will install and try
NOSS8 said:
Ok, but why rooting?
did you try to switch to the Canary release channel in the Magisk app settings and then update the app
Click to expand...
Click to collapse
because I need it with some apps to remove advertising
droidmate said:
try shamiko module as well. Tell me which banking app, I will install and try
Click to expand...
Click to collapse
thanks, i solved it with lsposed shamiko and xprivacylua modules
Related
I noticed today that I lost root. I searched and tried everything to fix it but I couldn't. So, I wiped out my entire phone and did a clean flash of Resurrection Remix 5.8.3 for the TMobile Note 3. Magisk worked after a clean flash.
Spent hours loading every app back on and now, Magisk isn't working again?
Please help?
Android version is 7.1.2.
Did it really lose root? I've found that randomly when you open Magisk it will claim that it has no root access, but when you close it (exit the app and swipe it away from the recents menu) and reopen it it will start functioning properly again.
Neo3D said:
I noticed today that I lost root. I searched and tried everything to fix it but I couldn't. So, I wiped out my entire phone and did a clean flash of Resurrection Remix 5.8.3 for the TMobile Note 3. Magisk worked after a clean flash.
Spent hours loading every app back on and now, Magisk isn't working again?
Please help?
Android version is 7.1.2.
Click to expand...
Click to collapse
Use un su zip first to remove the pre-installed root that rr has. Don't know if RR has root inbuilt now or not. But if it comes with root uninstall it and flash magisk on top of it and you are good to go
Me too have this problem. Magisk root sometimes gone, and i need to reboot device to make it work agan.
Tested in almost N custom roms like CM14.1, AEX, Omni, ViperOS, etc
exodius48 said:
Me too have this problem. Magisk root sometimes gone, and i need to reboot device to make it work agan.
Tested in almost N custom roms like CM14.1, AEX, Omni, ViperOS, etc
Click to expand...
Click to collapse
Did u remove built in root
shantam3108 said:
Did u remove built in root
Click to expand...
Click to collapse
If you installed magisk it will remove built in root automatically. -_-
Did you turn off magisk busybox ? It would help on fix that.
In another way, some of modules you installed may have potential to make you lose root. Trying to do enable/disable module to test it.
I did some more searching and someone said just flash Magisk again. I did that and it worked! But, then I lost root again several hours later, seems so random? I flashed Magisk again and it worked again.
I can only get two green on Magisk, the third green seems to run forever, I left it on for 10+ minutes and it still showed "testing".
BTW, I didn't flash the uninstall Magisk zip before re-flashing. I tried that way and my phone got into a bootloop. Luckily, I had a TWRP backup.
Kris Chen said:
Did you turn off magisk busybox ? It would help on fix that.
In another way, some of modules you installed may have potential to make you lose root. Trying to do enable/disable module to test it.
Click to expand...
Click to collapse
Thanks! I'll try this and see if it helps!
BTW, is anyone able to install Snapchat? I tried the Hide feature in Magisk and checked Snapchat, but it still knows I'm rooted and immediately closes after opening.
Also, the Sphero BB8 app? Anyone get that working? That one also closes right after opening.
exodius48 said:
If you installed magisk it will remove built in root automatically. -_-
Click to expand...
Click to collapse
No magisk just overrides the root. Use Un su zip first then flash magisk and u won't lose root
---------- Post added at 01:21 AM ---------- Previous post was at 01:20 AM ----------
Neo3D said:
Thanks! I'll try this and see if it helps!
Click to expand...
Click to collapse
Also keep in mind do run magisk without any modules first to check
shantam3108 said:
No magisk just overrides the root. Use Un su zip first then flash magisk and u won't lose root
Click to expand...
Click to collapse
Then why on AEX still loose root? It has no root prebuilt
exodius48 said:
If you installed magisk it will remove built in root automatically. -_-
Click to expand...
Click to collapse
shantam3108 said:
No magisk just overrides the root. Use Un su zip first then flash magisk and u won't lose root
Click to expand...
Click to collapse
I just want to clarify.
If systemless SuperSU is detected, Magisk will use that. If any other root is installed, the installation script will attempt to remove it and install MagiskSU instead (not sure to be successful and might lead to issues). If no root is installed, MagiskSU will be used. To avoid issues, the unSU zip is quite useful.
From v13, Magisk will no longer be compatible with SuperSU.
Didgeridoohan said:
I just want to clarify.
If systemless SuperSU is detected, Magisk will use that. If any other root is installed, the installation script will attempt to remove it and install MagiskSU instead (not sure to be successful and might lead to issues). If no root is installed, MagiskSU will be used. To avoid issues, the unSU zip is quite useful.
From v13, Magisk will no longer be compatible with SuperSU.
Click to expand...
Click to collapse
Wow, this is very informative, thanks!
Which version of unSU.zip is the correct one to use? Is this one okay?
https://forum.xda-developers.com/showpost.php?p=63615067
Neo3D said:
Wow, this is very informative, thanks!
Which version of unSU.zip is the correct one to use? Is this one okay?
https://forum.xda-developers.com/showpost.php?p=63615067
Click to expand...
Click to collapse
That's the one to use. :good:
Neo3D said:
BTW, is anyone able to install Snapchat? I tried the Hide feature in Magisk and checked Snapchat, but it still knows I'm rooted and immediately closes after opening.
Also, the Sphero BB8 app? Anyone get that working? That one also closes right after opening.
Click to expand...
Click to collapse
It is because your device lost safety net.
You need to reflash system and gapps.
Back up data partition then wipe all then flash rom and gaps and then magisk.
After starting device first enable magisk hide.
Then restore backed up /data.
After restart enable magisk hide switches and reboot system.
Profit.
Reply it works or not.
[email protected] said:
It is because your device lost safety net.
You need to reflash system and gapps.
Back up data partition then wipe all then flash rom and gaps and then magisk.
After starting device first enable magisk hide.
Then restore backed up /data.
After restart enable magisk hide switches and reboot system.
Profit.
Reply it works or not.
Click to expand...
Click to collapse
I just flashed magisk again and safety passed!
Neo3D said:
I just flashed magisk again and safety passed!
Click to expand...
Click to collapse
Tell me how much time you have safety net pass?
[email protected] said:
Tell me how much time you have safety net pass?
Click to expand...
Click to collapse
Hi, what do you mean "how much time you have safety net pass?
Neo3D said:
Hi, what do you mean "how much time you have safety net pass?
Click to expand...
Click to collapse
This time after reinstalling magisk is it working till now?
Or root is gone after some time?
Hi, my original plan was keeping my OP7 root-free because I need that banking app - which has an incredibly good root detection.
Long story short, a few days later and went back to my old habits... Magisk, Kernel, you name it. And the banking app stopped working again.
I do pass the safetynet test, have repackaged Magisk Manager. Google Pay is working like a charme. But Fidor bank seems to be better than Google, at least in this regard. I tried logging traffic using adguard, the app does not connect to anything, no dns requests as well.
Most of the times the app won't start at all, sometimes the first screen flashes for a very short period, and sometimes chrome opens with a webpage from the bank telling me my device is modified. How the **** do they know?
Maybe you guys may have a hint in what direction I could continue poking, because carrying a second phone just for banking is a little bit overkill...
h0l said:
Hi, my original plan was keeping my OP7 root-free because I need that banking app - which has an incredibly good root detection.
Long story short, a few days later and went back to my old habits... Magisk, Kernel, you name it. And the banking app stopped working again.
I do pass the safetynet test, have repackaged Magisk Manager. Google Pay is working like a charme. But Fidor bank seems to be better than Google, at least in this regard. I tried logging traffic using adguard, the app does not connect to anything, no dns requests as well.
Most of the times the app won't start at all, sometimes the first screen flashes for a very short period, and sometimes chrome opens with a webpage from the bank telling me my device is modified. How the **** do they know?
Maybe you guys may have a hint in what direction I could continue poking, because carrying a second phone just for banking is a little bit overkill...
Click to expand...
Click to collapse
Did you clear data of the banking app after Repackaging Magisk & adding it to Magisk Hide? I assume you did it.
Sent from my OnePlus6T using XDA Labs
DarkSJ1998 said:
Did you clear data of the banking app after Repackaging Magisk & adding it to Magisk Hide? I assume you did it.
Sent from my OnePlus6T using XDA Labs
Click to expand...
Click to collapse
I did. And rebooted. And reinstalled. And combinations of those.
A short screenrecord of what is happening as soon as I try to open the app can be found here (youtube link)
I have the exact same Problem
Everything works: Netflix, other banking apps, etc.. Just Fidor. I do not really know how their detection works, but I assume it's not just a root detection.
The weird thing is, it worked flawlessly 2 years ago Now it's just annoying..
Waited a few versions oft Magisk now, however nothing changes.
You're not alone
https://www.didgeridoohan.com/magisk/MagiskHide#hn_Hiding_root_from_apps
Same problem here ... since the new fidor version v3.14 is out, no way to getting it to work. Downgrade to 3.12 is futile, it forces the update to 3.14 immediately.
As an amendment to my post above (where you'll find pretty much all you need to hide from almost any app), I've successfully tested and hidden root from Fidor v3.14.0.1.
https://forum.xda-developers.com/showpost.php?p=79997227&postcount=98
Thank you, the issue seems to have been addressed there. But as far as I can see, the canary version does not have the optional modules, correct? So I think, unfortunately I will have to wait for an adapted release of the regular magisk.
rpc75 said:
But as far as I can see, the canary version does not have the optional modules, correct?
Click to expand...
Click to collapse
I have no idea what that means... Magisk modules works just fine on the Canary releases.
Didgeridoohan said:
As an amendment to my post above (where you'll find pretty much all you need to hide from almost any app), I've successfully tested and hidden root from Fidor v3.14.0.1.
https://forum.xda-developers.com/showpost.php?p=79997227&postcount=98
Click to expand...
Click to collapse
Thanks for sharing!
I have successfully installed the canary Magisk, have Magisk hide enabled, safetynet pass etc.
All bank apps work after adding them to the hide list, for example trying "Kontist" w/o hide gave error, with hide it works.
However, Fidor (3.14.0.1) is still not working for me :/
The app stays open for 1-2 seconds on the canary build, quite a bit longer than on stable version (instant close), clean cache + clean app data, still no luck.
So Fidor must use another detection method that the other bank apps don't have.
Any advice would be greatly appreciated!
dagoban said:
Thanks for sharing!
I have successfully installed the canary Magisk, have Magisk hide enabled, safetynet pass etc.
All bank apps work after adding them to the hide list, for example trying "Kontist" w/o hide gave error, with hide it works.
However, Fidor (3.14.0.1) is still not working for me :/
The app stays open for 1-2 seconds on the canary build, quite a bit longer than on stable version (instant close), clean cache + clean app data, still no luck.
So Fidor must use another detection method that the other bank apps don't have.
Any advice would be greatly appreciated!
Click to expand...
Click to collapse
https://www.didgeridoohan.com/magisk/MagiskHide#hn_Hiding_root_from_apps
Similar Problem, my bank brought out a new app, that is detecting the root/custom rom somehow. The app closes and shows me security bull**** about root, jailbreak, custom roms. I don't know how everything should be hidden, SafetyNet checks out but this app can detect it. No idea how.
alike03 said:
Similar Problem, my bank brought out a new app, that is detecting the root/custom rom somehow. The app closes and shows me security bull**** about root, jailbreak, custom roms. I don't know how everything should be hidden, SafetyNet checks out but this app can detect it. No idea how.
Click to expand...
Click to collapse
Check the link, one post before yours...
Didgeridoohan said:
Check the link, one post before yours...
Click to expand...
Click to collapse
Thanks, I was already going through that one.
Turns out the Banking app was detecting the Original Magisk Package.
Hiding Magisk Manager itself fixed my problem. Thanks for the link.
Didgeridoohan said:
https://www.didgeridoohan.com/magisk/MagiskHide#hn_Hiding_root_from_apps
Click to expand...
Click to collapse
Still did not get Fidor to work. Crashes after the initial first 2-3 seconds. If I uninstall Magisk it works again. Disabling modules, delete files from sd-card, etc. didn't change a thing.
This also seem not to be the problem, since it works after uninstalling Magisk.
Fidor is hidden from Magisk, Magisk is repacked with other name.
Mind giving specific instructions on what you did to make Fidor work on your device?
Thyrador said:
Mind giving specific instructions on what you did to make Fidor work on your device?
Click to expand...
Click to collapse
It's all right there in the link provided. I'm not doing anything that's not described there... Of course, there's a whole lot of things there that I didn't do.
Here's my setup:
Android Pie.
Magisk v19.4 (19307), with hidden Manager.
The app on the Hide list.
My internal storage is full of Magisk files and I never bother to disable any modules (all of the ones I have installed can be hidden without issue). I also have OEM Unlocking disabled, but that's just by chance and not something I've done because of an app detecting it...
Didgeridoohan said:
It's all right there in the link provided. I'm not doing anything that's not described there... Of course, there's a whole lot of things there that I didn't do.
Here's my setup:
Android Pie.
Magisk v19.4 (19307), with hidden Manager.
The app on the Hide list.
My internal storage is full of Magisk files and I never bother to disable any modules (all of the ones I have installed can be hidden without issue). I also have OEM Unlocking disabled, but that's just by chance and not something I've done because of an app detecting it...
Click to expand...
Click to collapse
So basically same setup. Still doesn't work with latest Fidor Release.
Thyrador said:
So basically same setup. Still doesn't work with latest Fidor Release.
Click to expand...
Click to collapse
When you say "basically", what's the difference?
Didgeridoohan said:
When you say "basically", what's the difference?
Click to expand...
Click to collapse
That's the question. Even if I do a complete fresh install without anything else beside Magisk and Fidor: as soon as Magisk is running (hidden manager & Fidor, SafetyNet Pass and certified in PlayStore), Fidor stops working.
Thyrador said:
That's the question. Even if I do a complete fresh install without anything else beside Magisk and Fidor: as soon as Magisk is running (hidden manager & Fidor, SafetyNet Pass and certified in PlayStore), Fidor stops working.
Click to expand...
Click to collapse
You're going to have to start digging deeper then...
Hi!
The latest CIB mobile bank app (updated at: 2019-09-21) detect phone as rooted.
I tried with Magisk 19.3 and 19.4 beta too.
System is Android v7.1.2 and LineageOS 14.1-20171021-UNOFICIAL-KonstaKANG-Y560.
I've reinstalled the bank app (with reboot system), but nothing changed.
I've tried this steps too, it's brake Magisk installation. After that I must reinstall Magisk.
Please repair/update this on next version!
ANOka said:
Hi!
The latest CIB mobile bank app (updated at: 2019-09-21) detect phone as rooted.
I tried with Magisk 19.3 and 19.4 beta too.
System is Android v7.1.2 and LineageOS 14.1-20171021-UNOFICIAL-KonstaKANG-Y560.
I've reinstalled the bank app (with reboot system), but nothing changed.
I've tried this steps too, it's brake Magisk installation. After that I must reinstall Magisk.
Please repair/update this on next version!
Click to expand...
Click to collapse
Sadly the most safe way to use banking apps is on a stock device without root
([emoji3590]09-09-18[emoji3590])
Works fine on latest Canary after hiding Magisk Manager (settings -> Hide Magisk Manager).
Like above, I tested the app and it doesn't detect root on my device (OP3T, custom Pie ROM, Magisk Canary build 19402 with hidden Manager 237). Magisk can hide from the app, so something about your setup is the issue.
Didgeridoohan said:
...Magisk Canary build 19402 with hidden Manager 237...
Click to expand...
Click to collapse
Where can I download?
ANOka said:
Where can I download?
Click to expand...
Click to collapse
If you've already tried v19.4 beta, there's practically no difference (especially regarding MagiskHide).
Didgeridoohan said:
If you've already tried v19.4 beta, there's practically no difference (especially regarding MagiskHide).
Click to expand...
Click to collapse
I've tried, not working. (See the first open post!)
ANOka said:
I've tried, not working. (See the first open post!)
Click to expand...
Click to collapse
I know, so my statement was made to let you know that you might not need the Canary build at this very moment (since there's currently practically no difference between the builds).
Anyway, take a look here for help on getting the app running:
https://didgeridoohan.com/magisk/MagiskHide#hn_Hiding_root_from_apps
On my phone xiaomi A1 rooted it works on the wife's phone xiaomi note 5 pro rooted it used to work fine but for some reason it has suddenly detected root and won't work now. I have checked all the settings to do with hiding are still selected as before, strange thing is it has worked briefly for a few seconds but then stopped again.
Please can people tell me if they have had this happen and how they fixed it please.
What checks is it doing to detect root does anyone know?
Thanks
hycraig said:
On my phone xiaomi A1 rooted it works on the wife's phone xiaomi note 5 pro rooted it used to work fine but for some reason it has suddenly detected root and won't work now. I have checked all the settings to do with hiding are still selected as before, strange thing is it has worked briefly for a few seconds but then stopped again.
Please can people tell me if they have had this happen and how they fixed it please.
What checks is it doing to detect root does anyone know?
Thanks
Click to expand...
Click to collapse
Try updating magisk.
Try to disable xposed modules.
Try to disable all modules.
See if it works now.
Then one by one reenable them.
Sent from my SM-G985F using Tapatalk
vash_h said:
Try updating magisk.
Try to disable xposed modules.
Try to disable all modules.
See if it works now.
Then one by one reenable them.
Sent from my SM-G985F using Tapatalk
Click to expand...
Click to collapse
Thanks for your reply magisk is up to date and I don't have any modules just magisk on its own. I do find it strange how it just stopped working after many months of being used regularly.
hycraig said:
Thanks for your reply magisk is up to date and I don't have any modules just magisk on its own. I do find it strange how it just stopped working after many months of being used regularly.
Click to expand...
Click to collapse
Credits Google
Now safetynet fails after March update
You need to change device props to pixel or lock bootloader
hycraig said:
Thanks for your reply magisk is up to date and I don't have any modules just magisk on its own. I do find it strange how it just stopped working after many months of being used regularly.
Click to expand...
Click to collapse
Biggest_Noob said:
Credits Google
Now safetynet fails after March update
You need to change device props to pixel or lock bootloader
Click to expand...
Click to collapse
My safteynet passes fine on both my devices
Thanks
somehow they manage to detect root even if magisk manager is running under custom package name and magisk hide is enabled.
Last version that is still running is 13.1.1 (apk available on apkmirror).
h4lli said:
somehow they manage to detect root even if magisk manager is running under custom package name and magisk hide is enabled.
Last version that is still running is 13.1.1 (apk available on apkmirror).
Click to expand...
Click to collapse
thanks @h4lli i couldn't see sky go version 13.1.1 for uk
so i got Sky Go UK 12.4.14 from apkmirror and can confirm is working fine
yeah still doesnt work, latest sky go app 20, latest magisk, still detects, anyone able to reverse the sky app to see what methods its using?
Fyi - any version other than the latest (20.6.1) at the moment forces an upgrade to 20.6.1, which then detects root.
Safety net is passing both basic and cts with Eval type basic. I'm on latest canary (20425).
I've tried :-
Uninstalling all apps that skygo could look for (titanium, openvpn etc.)
Using a work profile (shelter and island)
Disabling oem unlocking
Disabling usb/adb debugging
Disabling developer options
Deleting all files and folders that have magisk, twrp or titanium in them.
Basically everything here https://www.didgeridoohan.com/magisk/MagiskHide#hn_Hiding_root_from_apps
So, I think it's basically no go for sky go at the moment. Happy to be corrected if someone has it working.
Beardy
beardymarrow said:
Fyi - any version other than the latest (20.6.1) at the moment forces an upgrade to 20.6.1, which then detects root.
Safety net is passing both basic and cts with Eval type basic. I'm on latest canary (20425).
I've tried :-
Uninstalling all apps that skygo could look for (titanium, openvpn etc.)
Using a work profile (shelter and island)
Disabling oem unlocking
Disabling usb/adb debugging
Disabling developer options
Deleting all files and folders that have magisk, twrp or titanium in them.
Basically everything here https://www.didgeridoohan.com/magisk/MagiskHide#hn_Hiding_root_from_apps
So, I think it's basically no go for sky go at the moment. Happy to be corrected if someone has it working.
Beardy
Click to expand...
Click to collapse
Yeah still can't get it working. Damn it.
Hast everyone a sollution for running the sky Go App on rooted phones?
Skygo doesnt Work... hast anyone a sollution?
eula1977 said:
Skygo doesnt Work... hast anyone a sollution?
Click to expand...
Click to collapse
Have you tried this? It worked for me
SkyGo app detected root!
Hi everyone i have a problema using SkyGo app on my device because It detects the root. I renamed magisk , used magisk Hide , tried magiskhide props config , tried to delete cache and re-install SkyGo app but nothing worked...any solution...
forum.xda-developers.com
Hi everyone,
I'm just hitting my head against the wall with this applciation...
I'm running OP6 with evolution X 4.5.
This app refuses to let me uses it saying that "There's an error, Check if usb debugging is activated. Check if you're rooted or if a custom rom is installed"
I've tried magisk hide, also hidding some google services, usb debugging isn't activated,...
It's the only app I knoiw so far that can detect root on my phone.
Can anyone help me find a workaround please?
thanks.
Same here...
I am using MicroG without Safetynet support and I think that is the issue, unfortunately.
Payconiq by bancontact / rooted device
Hello
I have the same problem with OP6 rooted ... magisk hide activated but when run the payconiq Bancontact app " There is an error " not possible to run the app.
Anybody for a solution ?
veronesi.n said:
Hi everyone,
I'm just hitting my head against the wall with this applciation...
I'm running OP6 with evolution X 4.5.
This app refuses to let me uses it saying that "There's an error, Check if usb debugging is activated. Check if you're rooted or if a custom rom is installed"
I've tried magisk hide, also hidding some google services, usb debugging isn't activated,...
It's the only app I knoiw so far that can detect root on my phone.
Can anyone help me find a workaround please?
thanks.
Click to expand...
Click to collapse
I used to use an old apk of the app but now it doesn't let me use it and forces me to upgrade to last version.
My wife's app is working well but she has a lg g7 thinq unrooted.
So if someone can help, it would be very much appreciated as every other app is working well, safety net is passed, and this app is my only way to pay contactless because my banking app doesn't have a payement option in it.
I'm using it without issues. I hide it and just turn off USB debugging when I'm using it.
Just to make sure, did you just enable Magisk Hide in the options and nothing else?
Or did you also - after enabling - go into the Magisk Hide option that now appeared in the menu and placed a checkmark after all programs for which you want to hide Magisk from, in this case Payconiq ?
Clear Payconiq cache and data, reboot and setup Payconiq.
I have the same problem.
Magic hide is enabled. USB debugging is disabled.
In the Magic hide menu, the Payconiq app has a checkmark. All my other banking apps work fine.
Phone = Samsung J7 (2016)
Does someone have a solution?
Thanks
What's your problem with this app Can't you run it Can someone show what message is showing For me, this application is not available in my country, so I downloaded it from outside. I have Magisk 21000 root and Magisk manager 8.0.2 (307) (11) and it works for me and nothing is screaming about root etc :highfive:
It is the "Payconiq by Bancontact" app.
It worked on my phone without root. Since my phone is rooted, it doesn't work any more.
My phone is rooted with Magisk 20.4 (20400) and Manager 8.0.2 (307)
When I use the app: I receive this message. I hope this can help...
Date: 12 Oct 2020 15:23:47 GMT+02:00
Device: samsung SM-J710F
App version: 5.5.3
OS version: 8.1.0
App token: /
Failure code: ERROR_SDK_INTEGRITY (81)
Hello,
Problem solved.
Thanks to Spartacus500 .
I ’ve seen there is an other version of Magisk. I didn’t even know there was an update. :silly:
I did the following thinks:
In Magisk Hide menu, uncheck Payconiq app.
Stopped Payconiq app and Cleared data.
In Magisk Hide, place checkmark at payconiq app.
Installed Magisk 21.0 (21000) Beta.
Reboot.
Run Payconiq app, and it works fine
Hope it stay this way :fingers-crossed:
Veke123 said:
Hello,
Problem solved.
Thanks to Spartacus500 .
I ’ve seen there is an other version of Magisk. I didn’t even know there was an update. :silly:
I did the following thinks:
In Magisk Hide menu, uncheck Payconiq app.
Stopped Payconiq app and Cleared data.
In Magisk Hide, place checkmark at payconiq app.
Installed Magisk 21.0 (21000) Beta.
Reboot.
Run Payconiq app, and it works fine
Hope it stay this way :fingers-crossed:
Click to expand...
Click to collapse
Which version of the app did you use?
Is it 5.5.3?
Can you share the apk?
I tried 5.8.3, 5.5.3 and 5.3.3 but there are all stuck at the start.
I am passing all checks on rootbeerfresh (root checker).
flotheking said:
Which version of the app did you use?
Is it 5.5.3?
Can you share the apk?
I tried 5.8.3, 5.5.3 and 5.3.3 but there are all stuck at the start.
I am passing all checks on rootbeerfresh (root checker).
Click to expand...
Click to collapse
I use the "Payconiq By Bancontact" app. I don't know which version it was that worked before, but after an update I can not run it anymore on a rooted phone.
I will send you the apk of the "Payconiq by Bancontact" app. Hope you can find a solution.
I tried the other app (Payconiq) version 4.3.5.3 (latest) and it seems to be working.
flotheking said:
I tried the other app (Payconiq) version 4.3.5.3 (latest) and it seems to be working.
Click to expand...
Click to collapse
sorry for bumping an old thread but what are you using now?
In my case I'm still using the old Payconiq and I don't know what I'm going to do when it gets finally phased out.
Well, I'll just pay in another way I guess.
seeschloss said:
In my case I'm still using the old Payconiq and I don't know what I'm going to do when it gets finally phased out.
Well, I'll just pay in another way I guess.
Click to expand...
Click to collapse
thx for responding, what version are you using?
5.14.1 Payconiq app works for me Magisk hide root
Spartacus500 said:
5.14.1 Payconiq app works for me Magisk hide root
Click to expand...
Click to collapse
sadly not working for me, when i hide app in magisk, launching gets aborted without error message
got it working again
latest magisk, latest riru, lsposed, gravitybox all installed without issues to payconiq
payconiq app hidden in magisk, magisk manager isn't hidden
the thing that got it working again was disabling magisk module G-visual mod, same for magisk module fullscreen immersive gestures. Apparently payconiq app doesn't like keyboard spacing to be changed ????
i'm quite happy that i found it, but if anyone could explain i'd very gratefull
Hello,
Can I also ask a question, please? How can payconiq detect that someone is using a custom-rom? I also get a message that I am using a Custom-rom and that it is not possible to install. However, I have not installed MAGISK and my phone is not rooted.
Thanks
Andi
Bergfex2 said:
Hello,
Can I also ask a question, please? How can payconiq detect that someone is using a custom-rom? I also get a message that I am using a Custom-rom and that it is not possible to install. However, I have not installed MAGISK and my phone is not rooted.
Thanks
Andi
Click to expand...
Click to collapse
Could be detecting your unlocked bootloader, various prop values, etc. For a list of props that are common detectors, and that MagiskHide changes (which of course is removed in the next stable release) you can check here:
https://github.com/Magisk-Modules-Repo/MagiskHidePropsConf#setreset-magiskhide-sensitive-props