Database Develop

[kernel][5.0.1][DT2W][Mako]

This is the stock kernel LRX22C but with @stratosk's Double Tap to Wake added.
Nothing else added or taken away
Only available for Nexus 4.
Only tested with stock ROM, others may not work.
Enable DT2W with Trickster Mod
Flash dt2w_boot.img in bootloader
Source:-
https://android.googlesource.com/kernel/msm
https://github.com/stratosk/kernel_msm
Toolchain:-
https://android.googlesource.com/platform/prebuilts/gcc/linux-x86/arm/arm-eabi-4.6
Built on Ubuntu 14.04.1 LTS

Good effort. I think world seems to have forgotten s2w which was my favorite! And its not available in any modern kernels ( even if listed it doesn't work). Any works on that?

arvindgr said:
Good effort. I think world seems to have forgotten s2w which was my favorite! And its not available in any modern kernels ( even if listed it doesn't work). Any works on that?
Click to expand...
Click to collapse
Thanks. I too liked @bponury's Slide to wake from Touch Control but the source isn't available anywhere. As far as I'm aware other versions of S2W had problems.

Can u also build a stock kernel but with gamma colors added only?
Would be greatful if u can have time to do that
Without DT2W or S2W only gamma colors from Faux or Franco..
_________________________________________________
Device: Google Nexus 4 (LG-E960) 16GB (MAKO)
ROM: SimpleAOSP-L-ROM (Stable Build 7)
Kernel: Stuxnet v4.5 (3.4.105)
Gapps: PA-Gapps-5.0.1-BETA4 (MINI)
________________________________________________

Sorry but I'm not a developer, it took me ages to work out how to do this so I'm unlikely to do it again for a feature I never use. Would you be interested in a tutorial thread on the process I went through?

I would totally be interested in a tutorial, from building and configuring the kernel to add the dt2w feature.
Sent from my Nexus 4 using XDA Free mobile app

Nicknoxx said:
Sorry but I'm not a developer, it took me ages to work out how to do this so I'm unlikely to do it again for a feature I never use. Would you be interested in a tutorial thread on the process I went through?
Click to expand...
Click to collapse
It would be better to use the GCC 4.7 toolchain in that case because it is more optimised and is the one used in the actual stock kernel. Also, if you need help for your guide, I can help you.

Ok I'll do a 'Guide' thread and post a link here - it will take a few days. I'll have a look at using the suggested toolchain - thanks for the offer of help - I may need it.

i flashed this kernel and result in bootloop argggggggg now i have to flash this rom again n i m going to loose all my data
is there any thing i can do with it to avoid this
EDIT - problem solved i flashed rom without wiping data but this kernel is not working for me

I've only tested it with the stock ROM, which one are you using? I'll edit the op to include this.

Nicknoxx said:
Sorry but I'm not a developer, it took me ages to work out how to do this so I'm unlikely to do it again for a feature I never use. Would you be interested in a tutorial thread on the process I went through?
Click to expand...
Click to collapse
I'm here to help you too
I faced the exact same situation that you faced while starting with the kernel. It's very very hard at first but once you get familiar with all the git, cherry-pick stuff, it will be so awesome. As @zaclimon suggested you can use the STOCK toolchain if you want to stay close to STOCK or you can use THIS toolchain(2014.12 4.9.3) and THIS COMMIT which ensures you will not run into any compile errors regarding toolchain.

Nicknoxx said:
I've only tested it with the stock ROM, which one are you using? I'll edit the op to include this.
Click to expand...
Click to collapse
Bro i m using stock 5.0.1 rom but this is not working for me

tonyking said:
Bro i m using stock 5.0.1 rom but this is not working for me
Click to expand...
Click to collapse
I can't imagine why it works fit me but not you. Do you have stock recovery or root?

Nicknoxx said:
I can't imagine why it works fit me but not you. Do you have stock recovery or root?
Click to expand...
Click to collapse
No i m using twrp recovery with root
Edit- can you make a flashable zip of this kernel

tonyking said:
No i m using twrp recovery with root
Click to expand...
Click to collapse
Hmm, the same as me.
tonyking said:
Edit- can you make a flashable zip of this kernel
Click to expand...
Click to collapse
I'll try.

Edit Schoolboy error, now fixed. Will address in upcoming guide.

The first part of my guide is here
http://forum.xda-developers.com/nexus-4/general/guide-beginners-guide-to-building-t2986686

[EOL] [KERNEL][G800F][exynos][CUSTOM KERNEL] FOR MOST CUSTOM ROMS [EOL]

Code:
***WARNING***
-READ CAREFULLY!!
YOU FLASH THIS KERNEL AT YOUR OWN RISK.I TAKE NO RESPONSIBILITY FOR ANY DAMAGE THAT MAY OCCUR DUE TO THE FLASHING OF THIS IMAGE.
I WILL NOT BE RESPONSIBLE FOR LOST DATA,BRICKED PHONE,OR ANYTHING OF THE SUCH.(PHONE EXPOLDES,OVERHEATS ETC)
THIS KERNEL IS ONLY FOR THE S5 MINI SM-G8OOF (Exynos) DO NOT FLASH THIS ON ANY OTHER DEVICE!
EOL (End of Life) ​
I will be creating a new thread for my N kernel - Stay tuned!​
UPDATED Linux kernel to 3.4.113 on 27-10-2016​UPDATED to v2.5 on 13-10-2016​
Code:
Changes in version 2.5
*Unlocked CPU frequencies 1500,300 and 200MHZ
*Switched to self built Linaro/Sabermod toolchain
*Added many more optimization flags
*Added DriveDroid support
Features
-Now supports Many different ROMS for the G800F
-Compiled with self built optimized Linaro/SaberMod toolchain ("LinaroMod")
-Unlocked CPU frequencies: 1500MHZ,200MHZ and 300MHZ
-Updated Linux kernel from 3.4.39 to the latest 3.4.113
-Added many optimizations (You can see all of the optimization flags in the makefile on the kernel source page)
-enabled graphite
-Added Drivedroid Support - http://softwarebakery.com/projects/drivedroid
-Fading LED's
-Added I/O schedulers
-zen
-sio
-fifo
-fiops
-tripndroid
-vr
-Added CPU governors
-zzmoove
-hyper
-alucard
-darkness
-nightmare
-wheatley
-smartassv2
-dancedance
-pegasusq
Click to expand...
Click to collapse
You will need Kernel Adiutor (free from the play store) or similar app capable of allowing you to switch I/O schedulers and
CPU governors in order to be able to change and set those.
I can recommend this.
http://forum.xda-developers.com/android/apps-games/kernel-adiutor-mod-singularity-kernel-t3333549
Click to expand...
Click to collapse
Known Issues
Let me know and I will try to fix them
Click to expand...
Click to collapse
Installation
I HIGHLY recommend that you do a full backup before flashing this kernel.I am not responsible if you lose any or all of your data.BACKUP!!
1.Download the "Spookcity_Kernel-MM"
2.Place the zip onto your phones storage
3.Reboot into recovery (Volume-Up + Home + Power button)
4.Select install
5.Flash the downloaded kernel
6.Go back a few times in TWRP.Select wipe -> Advanced wipe and wipe Dalvic/Art cache and the cache partition
If you do not do this you are very likely to experience strange issues.You have been warned.Do not report problems if you did not do this.
7.Reboot and hopefully enjoy.
Click to expand...
Click to collapse
Downloads
Spookcity_Kernel-MM
Click to expand...
Click to collapse
Sources
Toolchain - https://github.com/Spookcity/Android-Toolchains
Kernel - https://github.com/Spookcity/android_kernel_samsung_kminilte
Click to expand...
Click to collapse
Code:
CHANGELOG
[U]18-06-2017[/U]
-Switched to anykernel2
[U]31-10-2016[/U]
-Added zip for Bliss Rom
[U]13-10-2016[/U]
-Unlocked CPU freq 1500,200,300MHZ
-Switched to my self built toolchain
-Added many more optimization flags to the build
-Added DriveDroid support
-Added zip for Zephyr-OS
[U]24-07-2016[/U]
- Added zips to support more custom ROMS
[U]V2 - 23-07-2016[/U]
-Fixed RAMDISK to make it compatible and actually work with newer builds of CM13
-Changed SELinux from disabled to permissive to be in line with the "stock" CM kernel
-Added I/O schedulers
-fiops
-tripndroid
-vr
-Added CPU governors
-pegasusq
[U]V1 - Initial Release[/U]
Thanks to
-hennymcc and CTXz for bringing CM13 to our device! I used their kernel sources to build this.Without them I never would have been able to attemp this.
-DJ_Steve for his custom kernel.Without being able to look at his sources and cherry-pick some things I would also not have been able to do this.
-CurtisMJ Ditto same thing here.His kernel build and sources were very helpful to me.
-frap129 for his amazing toolchains!
-ArchiDroid
Anyone I may have left out sorry.I appreciate you all!
Click to expand...
Click to collapse
I hope you enjoy and please say thanks if you find this at all useful
XDA:DevDB Information
Spookcity_Kernel, Kernel for the Samsung Galaxy S5 Mini
Contributors
spookcity138
Kernel Special Features:
Version Information
Status: Beta
Created 2016-05-26
Last Updated 2017-06-18

Nice, finally some new development for our phone =)
I will test the kernel right away...
One thing that I would really love would be if you have the time to look into adding DT2W :angel:
Thanks for your work so far :good:
*edit*
booting went well. However WiFi doesnt work for me :/ I uploaded the logcat-output filtered for "wifi" to hastebin. If you need anything else for debugging let me know. Thanks to dual boot I will keep your custom kernel on one ROM
log

zaworka said:
Nice, finally some new development for our phone =)
I will test the kernel right away...
One thing that I would really love would be if you have the time to look into adding DT2W :angel:
Thanks for your work so far :good:
*edit*
booting went well. However WiFi doesnt work for me :/ I uploaded the logcat-output filtered for "wifi" to hastebin. If you need anything else for debugging let me know. Thanks to dual boot I will keep your custom kernel on one ROM
log
Click to expand...
Click to collapse
Thanks for trying out the kernel. That's weird about the WiFi. I have never had that happen in the bunch of times I have flashed it. I will def look into it.I'll have a look at the log, although at this point I'm also not that great at interpreting those, so it may not help. I'll see what I can do though
Sent from my SM-G800F using Tapatalk

can you tell me someone what is kernel?

br3acker said:
can you tell me someone what is kernel?
Click to expand...
Click to collapse
http://www.makeuseof.com/tag/linux-kernel-explanation-laymans-terms/

zaworka said:
Nice, finally some new development for our phone =)
I will test the kernel right away...
One thing that I would really love would be if you have the time to look into adding DT2W :angel:
Thanks for your work so far :good:
*edit*
booting went well. However WiFi doesnt work for me :/ I uploaded the logcat-output filtered for "wifi" to hastebin. If you need anything else for debugging let me know. Thanks to dual boot I will keep your custom kernel on one ROM
log
Click to expand...
Click to collapse
OK,well after looking at the log and trying to decipher it and then thinking a bit I have only come up with one possibility.Maybe somehow your wpa_supplicant.conf file located in /data/misc/wifi/wpa_supplicant.conf has the wrong permissions for some reason.If you want you could try to check and possibly change the permissions.If you decide to try this I would backup the file because you never know.
The permissions should be: Owner - wifi Group - wifi...
Owner read and write/Group read and write/ others none.
If your permissions are correct on that file the only other thing I could possibly think of to do if you wanted would be to delete that file,wpa_supplicant.conf.Only after you back it up it though because you will lose all of your passwords,and reboot.It should recreate it.Do that at your own risk though.This is all I have come up with because I have never had that problem,so it's a bit difficult.

I am sorry, I think the error was my fault and not a bug of the kernel. I think the build that I am running at the moment is one I build myself and used sabermod toolchain. I remembered that I had the same problem using DMPKernel on that build. I thought I was using one of hennymmc's builds by now - so, sorry for reporting but thanks for looking into anyways.
Unfortunately I tried both and didnt solve the issue ,the permissions were set correctly btw.
I just installed the CM13 on another partition but - unless I have a flashable zip file - I can not install your kernel on that one. Would it be possible to provide the kernel as .zip?

zaworka said:
I am sorry, I think the error was my fault and not a bug of the kernel. I think the build that I am running at the moment is one I build myself and used sabermod toolchain. I remembered that I had the same problem using DMPKernel on that build. I thought I was using one of hennymmc's builds by now - so, sorry for reporting but thanks for looking into anyways.
Unfortunately I tried both and didnt solve the issue ,the permissions were set correctly btw.
I just installed the CM13 on another partition but - unless I have a flashable zip file - I can not install your kernel on that one. Would it be possible to provide the kernel as .zip?
Click to expand...
Click to collapse
Sure thing.I updated the download section above and added a flashable zip.I think it'll work.

spookcity138 said:
Sure thing.I updated the download section above and added a flashable zip.I think it'll work.
Click to expand...
Click to collapse
Nice, that worked! Thanks for the effort :good:
Will test it over the next few days :fingers-crossed:

zaworka said:
Nice, that worked! Thanks for the effort :good:
Will test it over the next few days :fingers-crossed:
Click to expand...
Click to collapse
Good,I'm glad that worked.You thoughts and feedback are most welcomed.

Any chance this kernel hits the G800H for cm 13 too ?
I can be your tester

sasukesama said:
Any chance this kernel hits the G800H for cm 13 too ?
I can be your tester
Click to expand...
Click to collapse
Hey, I appreciate the offer. That is something I can look into at some point. No promises. In still trying to learn all of this stuff.
Sent from my SM-G800F using Tapatalk

spookcity138 said:
Hey, I appreciate the offer. That is something I can look into at some point. No promises. In still trying to learn all of this stuff.
Sent from my SM-G800F using Tapatalk
Click to expand...
Click to collapse
Sounds good
I think you can do the same (using the cm13 kernel and DJ_Steve kernel stuff) as he has a G800H version of his kernel

I use your kernel , you can repair the wifi ?

Abde77 said:
I use your kernel , you can repair the wifi ?
Click to expand...
Click to collapse
What's the problem with the WiFi exactly? I need to update this anyway. I will at some point.I've had no WiFi probs though.
Sent from my SM-G800F using Tapatalk

spookcity138 said:
What's the problem with the WiFi exactly? I need to update this anyway. I will at some point.I've had no WiFi probs though.
Sent from my SM-G800F using Tapatalk
Click to expand...
Click to collapse
Conducted any work on the development of the kernel? About sound problems and headphones like DJ_Steve , initially had no problems, and then there., maybe it depends on kernel version? Is there a chance to make all the improvements in version 3.4.39 ? (Google translation)

Oleggluk said:
Conducted any work on the development of the kernel? About sound problems and headphones like DJ_Steve , initially had no problems, and then there., maybe it depends on kernel version? Is there a chance to make all the improvements in version 3.4.39 ? (Google translation)
Click to expand...
Click to collapse
I actually haven't touched this recently at all.I've been spending too much time on the mess that is my AOSP build [emoji2]
I give up on that for now though.It's giving me a headache.
I will try to get back to this soon,as I don't even think it works with any of my builds.I don't know.I'm not even using this right now.
I never actually had any real audio issues with this however and I did use if for awhile,so that's strange.
Sent from my SM-G800F using Tapatalk

spookcity138 said:
I actually haven't touched this recently at all.I've been spending too much time on the mess that is my AOSP build [emoji2]
I give up on that for now though.It's giving me a headache.
I will try to get back to this soon,as I don't even think it works with any of my builds.I don't know.I'm not even using this right now.
I never actually had any real audio issues with this however and I did use if for awhile,so that's strange.
Click to expand...
Click to collapse
Also does not have wi-fi access in the new Assembly СМ13 from ayke with this kernel. I took apart your kernel and replace the ramdisk from the new build, wifi now works. (Google translation)

Oleggluk said:
Also does not have wi-fi access in the new Assembly СМ13 from ayke with this kernel. I took apart your kernel and replace the ramdisk from the new build, wifi now works. (Google translation)
Click to expand...
Click to collapse
I kinda remember this issue as well.Good to know about the ramdisk.
Its such a strange thing how only some experience the robotic voice...and you have no microphone problems with ayke's build either? Like it stops working after a phone call?
Sent from my SM-G800F using Tapatalk

spookcity138 said:
I kinda remember this issue as well.Good to know about the ramdisk.
Its such a strange thing how only some experience the robotic voice...and you have no microphone problems with ayke's build either? Like it stops working after a phone call?
Sent from my SM-G800F using Tapatalk
Click to expand...
Click to collapse
Robot voice I have never had. And mute has the same problem that error camera. If you kill the mediaserver, the microphone performance is restored. You can use the long-known app Mediaserver Killer. (Google translation)

[KERNEL][6+] s1mple espresso

I don't like large threads. My old espresso needs an up, so where we go.
It's based on latest omap4 common by unlegancy-android with these changes:
Compiled with custom Linaro GCC by @Christopher83.
CPU underclocked to 200MHz and overclocked up to 1400MHz.
GPU overclocked up to 512MHz. (384 default)
Custom voltages based on user experience.
Touch boost from franco kernel. (default boost set to 1200MHz)
Mini-FAQ:
Q: It works on all ROMs? Nougat?
R: It should work on any recent ROM who use omap4 common by unlegancy-android.
Q: All variants?
R: Due compatibility issues it could be not work on some devices/combinations, test it.
If won't work, please provide the variant, ROM, TWRP and last_kmsg if possible.
Click to expand...
Click to collapse
Q: Is safe 1400MHz on espresso?
R: Yes, passed my stability tests without problems.
Q: Works with ramdisk mods? (Magisk)
R: Yes, by AnyKernel2.
Code:
Change CPU max clock:
# echo 'x' > /sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq
x = 1080000, 1200000, 1300000, 1400000
Change GPU max clock:
# echo 'x' > /sys/devices/platform/omap/pvrsrvkm.0/sgxfreq/frequency_limit
x = 153600000, 384000000, 512000000
Make boot and system backup before installation, download.
XDA:DevDB Information
s1mple espresso, Kernel for the Samsung Galaxy Tab 2
Contributors
dcastro172, Android-Andi, Ziyan, Sam Nakamura
Source Code: https://github.com/dcastro172/android_kernel_ti_omap4
Kernel Special Features:
Version Information
Status: Testing
Created 2018-04-23
Last Updated 2018-05-05

NICE.....Test It Soon

Didn't work for me
Tried to install it over AICP and just boot looped.
Then I installed ResurectionRemix and installed the kernel and had the same results.
Used TWRP 3.2.0.0
Thanks for trying to give us something new for our old Tab2

Skarni said:
Tried to install it over AICP and just boot looped.
Then I installed ResurectionRemix and installed the kernel and had the same results.
Used TWRP 3.2.0.0
Thanks for trying to give us something new for our old Tab2
Click to expand...
Click to collapse
I checked these ROMs and they use omap4 common, should have worked, maybe a ramdisk issue, to be fair I just tested it with recent OmniROM MM and it's working fine, I will try these.

THANK YOUUU FINALLY A NEW KERNEL HERE...does it work on nougat Roms?

Skarni said:
Tried to install it over AICP and just boot looped.
Then I installed ResurectionRemix and installed the kernel and had the same results.
Used TWRP 3.2.0.0
Thanks for trying to give us something new for our old Tab2
Click to expand...
Click to collapse
I tested today with ResurectionRemix by @smart-t78 and works well, the first boot without s1mple taken so much time, then I switch off and powered on, it booted.
Enrico03 said:
THANK YOUUU FINALLY A NEW KERNEL HERE...does it work on nougat Roms?
Click to expand...
Click to collapse
Yeah, tested with latest Lineage 14.1, however, I found an issue about frequency scaling, it boots with max frequency of 300MHz :laugh:
But you can change it using adb/terminal later.

New build up :fingers-crossed:
Now it's compiled with custom Linaro GCC by @Christopher83
Added touch boost from franco kernel :highfive: (interactive governor only, configurable)
Removed 200MHz in attempt to fix frequency scaling issues
OP updated.

Installed latest OmniRom 6 booted and then installed S1mple kernel. Left it to boot for 1 hour and it never booted. turned off and tried again, not luck.
re-installed my AICP backup.
Might try it with Slim6 when I have some time, but would prefer an unrooted rom since I use netflix.

Skarni said:
Installed latest OmniRom 6 booted and then installed S1mple kernel. Left it to boot for 1 hour and it never booted. turned off and tried again, not luck.
re-installed my AICP backup.
Might try it with Slim6 when I have some time, but would prefer an unrooted rom since I use netflix.
Click to expand...
Click to collapse
Doesn't magisk hide solve the Netflix problem? It should actually...
(sorry for the OT)
-------------------------------
Thanks @dcastro172 a new custom kernel sounds like fun, would be very cool to have something more or less stable with this significant OC added, I'll need to check this out when I'm near to my p5110 soon.. :good:
Sent from my Nexus 7 using XDA Labs

Skarni said:
Installed latest OmniRom 6 booted and then installed S1mple kernel. Left it to boot for 1 hour and it never booted. turned off and tried again, not luck.
re-installed my AICP backup.
Might try it with Slim6 when I have some time, but would prefer an unrooted rom since I use netflix.
Click to expand...
Click to collapse
Did you try with Andi's builds or from official Omni website? espresso3g or wifi? It will only work with recent Andi's builds, I'm running it and works well.

Doesn't boot on latest lineageOS and needs restoring boot & system to get back a working device, here's a demsg.log....
https://drive.google.com/file/d/1cJFmLO-e4lKODHTDYCRNDJ7RfGZK50G0/view?usp=drivesdk

dcastro172 said:
Did you try with Andi's builds or from official Omni website? espresso3g or wifi? It will only work with recent Andi's builds, I'm running it and works well.
Click to expand...
Click to collapse
Yep! Used Andi's unofficlal: omni_espressowifi-6.0.1-20180414-2301.zip
---------- Post added at 01:50 PM ---------- Previous post was at 01:45 PM ----------
Sam Nakamura said:
Doesn't magisk hide solve the Netflix problem? It should actually...
(sorry for the OT)
Click to expand...
Click to collapse
"OT response to close": Only been able to get netflix to work by sideloading on ROM that is unrooted no gapps .
Magisk 16 has been problematic for me. 14 was okay. I would use magisk 14 to root to enable OC on s1mple kernel.

Sam Nakamura said:
Doesn't boot on latest lineageOS and needs restoring boot & system to get back a working device, here's a demsg.log....
https://drive.google.com/file/d/1cJFmLO-e4lKODHTDYCRNDJ7RfGZK50G0/view?usp=drivesdk
Click to expand...
Click to collapse
Skarni said:
Yep! Used Andi's unofficlal: omni_espressowifi-6.0.1-20180414-2301.zip
Click to expand...
Click to collapse
There's something very important which I'm missing, probably a very stupid issue since it works on my P5110, I read the dmesg and didn't see much useful logs, tomorrow I will investigate more. Thanks guys.

dcastro172 said:
There's something very important which I'm missing, probably a very stupid issue since it works on my P5110, I read the dmesg and didn't see much useful logs, tomorrow I will investigate more. Thanks guys.
Click to expand...
Click to collapse
FYI, I have a P3113,

The newer (maybe 2018) are default libion and it is said not to flash any custom kernels as they are not compatible.... So is this the reason some people have some trouble?

Excellent! Finally a overclockable kernel for our devices! Thank you very much Mr. dcastro172! Will test and report here ASAP!

drunkbum said:
The newer (maybe 2018) are default libion and it is said not to flash any custom kernels as they are not compatible.... So is this the reason some people have some trouble?
Click to expand...
Click to collapse
Well, recent ROMs with updated repos from unlegancy/lineageos builds with standard libion by default, my fork will only work with standard libion, some outdated ROMs use TI's libion and will not work, I think it's not the issue since @Skarni tried with latest OmniROM from @Android-Andi (which use standard libion) and won't worked for his P3113 while my P5110 woks perfectly.
And the dmesg from @Sam Nakamura is not much useful why it's from his reboot after the bootloop, I thought it has a SELinux issue but it's not, however I looked at second line and it looks like an old official build:
Code:
<5>[ 0.000000] Linux version 3.0.101-gbb24628 ([email protected]) (gcc version 4.8 (GCC) ) #1 SMP PREEMPT Sat Dec 9 09:46:13 UTC 2017
I'm trying figure it by looking at unlegancy/lineageos commits if I'm missing something but no luck yet.

galoneta said:
Excellent! Finally a overclockable kernel for our devices! Thank you very much Mr. dcastro172! Will test and report here ASAP!
Click to expand...
Click to collapse
Make sure do a backup why people are running in boot issues, if you run in boot issue please take a "cat /proc/last_kmsg > /sdcard/kmsg.txt" in TWRP terminal.

dcastro172 said:
And the dmesg from @Sam Nakamura is not much useful why it's from his reboot after the bootloop, I thought it has a SELinux issue but it's not, however I looked at second line and it looks like an old official build:
Click to expand...
Click to collapse
Not sure why the log referenced this old build, as said before I'm actually on the latest official lineageOS build from 11th February 2018 as seen on the screenshot.
I gladly provide more logs if you tell me exactly what could be of use for you...
Edit: the referenced kernel version is the one included in TWRP, check the build dates from official twrp.me and the log reference....
https://dl.twrp.me/espressowifi/
Sent from my OnePlus 3T using XDA Labs

Sam Nakamura said:
Not sure why the log referenced this old build, as said before I'm actually on the latest official lineageOS build from 11th February 2018 as seen on the screenshot.
I gladly provide more logs if you tell me exactly what could be of use for you...
Edit: the referenced kernel version is the one included in TWRP, check the build dates from official twrp.me and the log reference....
https://dl.twrp.me/espressowifi/
Sent from my OnePlus 3T using XDA Labs
Click to expand...
Click to collapse
Oh, this should explain, but you was using a different kernel when you flashed it?

[KERNEL][FORK] Illusion X/Kernel from namelessAOSP

Made a new kernel forked from the stock nameless kernel and I got really good benchmark scores. For banking apps download universal safety fix and then hide all your banking apps and your apps that don't work with root this kernel comes with root but when you get into magisk manager you can unroot your device I WILL NOT BE RESPONSIBLE FOR A BRICKED PHONE! if you say anything like "THIS GUY FRICKED MY PHONE" i will laugh at you Source code: https://github.com/Gavin123-code/kernel_oneplus_sm8250 Credits The Nameless-AOSP team and The Illusion-X Devs. happy flashing!

GbnrVR said:
Made a new kernel forked from the stock nameless kernel and I got really good benchmark scores
Click to expand...
Click to collapse
Overclocked to 4250Mhz and I got good battery life like 16 hours (THIS US ONLY TESTED ON NAMELESS) it should work on other roms but just saying and ANDROID 12 only I'll try to keep it updated with nameless updates but updates will stop when they switch kernel if they do. CREDITS: Nameless AOSP Maintainer For the 8T and the IllusionX team

GbnrVR said:
Overclocked to 4250Mhz and I got good battery life like 16 hours (THIS US ONLY TESTED ON NAMELESS) it should work on other roms but just saying and ANDROID 12 only I'll try to keep it updated with nameless updates but updates will stop when they switch kernel if they do. CREDITS: Nameless AOSP Maintainer For the 8T and the IllusionX team
Click to expand...
Click to collapse

Download
96 MB file on MEGA
mega.nz

I AM NOT RESPONSIBLE FOR A BRICKED DEVICE

Will this fix for the qualcomm crash dump problem I understand the original version seem to have problems with?

badadam said:
Will this fix for the qualcomm crash dump problem I understand the original version seem to have problems with?
Click to expand...
Click to collapse
I don't know I haven't experienced those problems

You can try

GbnrVR said:
You can try
Click to expand...
Click to collapse
Also this is incompatible with the OnePlus 9R

GbnrVR said:
You can try
Click to expand...
Click to collapse
OK, I´ll give it a try and see how it goes.

Flashed it and now my banking apps are not working. Detected as rooted....

badadam said:
Flashed it and now my banking apps are not working. Detected as rooted....
Click to expand...
Click to collapse
Use universal safety net fix and hide the banking apps

GbnrVR said:
Use universal safety net fix and hide the banking apps
Click to expand...
Click to collapse
I´m not rooted so I´ll just see if a dirty flash can bring it back.

badadam said:
I´m not rooted so I´ll just see if a dirty flash can bring it back.
Click to expand...
Click to collapse
I thought you said detected as rooted because this kernel is prerooted and with magisk Manager you can unroot

You need to post your source. Also you should really provide more info in the OP, especially since it's already patched with magisk supposedly...

Thanks for the build .
Can you post the source please ?
Have you modified illusion X ? If so what features?
Would be great to have more cpu governor's / TCP algorithms and I/O schedulers . As well as under clocking CPU and GPU
Looking forward to upcoming releases .
UPDATE ** Experiencing extreme lag when switching between apps .
GPU has -44mhz - 800mhz clock speeds , perhaps -44hz is the issue?
Your on the right track , great to see fresh kernel ( fork )

azoller1 said:
You need to post your source. Also you should really provide more info in the OP, especially since it's already patched with magisk supposedly...
Click to expand...
Click to collapse
Fun fact this comes from nameless so you can look at the nameless kernel sources

GbnrVR said:
Fun fact this comes from nameless so you can look at the nameless kernel sources
Click to expand...
Click to collapse
Oh I get what you mean since it's like overclocked and stuff

hightech316 said:
Thanks for the build .
Can you post the source please ?
Have you modified illusion X ? If so what features?
Would be great to have more cpu governor's / TCP algorithms and I/O schedulers . As well as under clocking CPU and GPU
Looking forward to upcoming releases .
UPDATE ** Experiencing extreme lag when switching between apps .
GPU has -44mhz - 800mhz clock speeds , perhaps -44hz is the issue?
Your on the right track , great to see fresh kernel ( fo
Click to expand...
Click to collapse
hightech316 said:
Thanks for the build .
Can you post the source please ?
Have you modified illusion X ? If so what features?
Would be great to have more cpu governor's / TCP algorithms and I/O schedulers . As well as under clocking CPU and GPU
Looking forward to upcoming releases .
UPDATE ** Experiencing extreme lag when switching between apps .
GPU has -44mhz - 800mhz clock speeds , perhaps -44hz is the issue?
Your on the right track , great to see fresh kernel ( fork )
Click to expand...
Click to collapse
Modded IllX And -44Mhz is a glitch because somehow android cant handle so 4250Mhz also thank you for the nice messages ill figure out how to get the sources so i hope XDA doesnt delete this

GbnrVR said:
Modded IllX And -44Mhz is a glitch because somehow android cant handle so 4250Mhz also thank you for the nice messages ill figure out how to get the sources so i hope XDA doesnt delete this
Click to expand...
Click to collapse
also question can anyone help me decompile a kernel im on windows and i am stuck

General [CLOSED] DELETED

deleted

deleted

Reserved #1

Reserved #2

Finally, a LineageOS 19.1 without Gapps pre-installed. Kinda sad that the other los has gms built-in while the other one stopped development. But this one looks promising as it sticks to the original Lineage experience.
Some questions that I would like to have clarification before testing this ROM:
1. ROM is using Aryan Tress right? Means it does also support ANX v204?
2. Signature spoofing present in the ROM?
3. Is OTA available?
4. Will it support erofs and f2fs compression in future build?
5. Is NTFS file format for OTG and SD Card readable? (Some roms can't read my ntfs SD card which I use for backups/ROM changing)

agree with @BigChungus321 , finally a vanilla build.
Can you please tell me the difference between vantom kernel and the default?
Also are you planning to make this official?
Edit: Is this using oss vendor?
Thank you!

Stan m said:
agree with @BigChungus321 , finally a vanilla build.
Can you please tell me the difference between vantom kernel and the default?
Also are you planning to make this official?
Edit: Is this using oss vendor?
Thank you!
Click to expand...
Click to collapse
This is an oss vendor rom since the flashing instruction only says latest miui 13 firmware plus the download size for the file is 1GB+. If it is miui vendor then it should be less.

BigChungus321 said:
This is an oss vendor rom since the flashing instruction only says latest miui 13 firmware plus the download size for the file is 1GB+. If it is miui vendor then it should be less.
Click to expand...
Click to collapse
Okay thanks! Why the miui firmware though? I moved from arrow os 11 to 12 without flashing any firmware or anything else...

BigChungus321 said:
Finally, a LineageOS 19.1 without Gapps pre-installed. Kinda sad that the other los has gms built-in while the other one stopped development. But this one looks promising as it sticks to the original Lineage experience.
Some questions that I would like to have clarification before testing this ROM:
1. ROM is using Aryan Tress right? Means it does also support ANX v204?
2. Signature spoofing present in the ROM?
3. Is OTA available?
4. Will it support erofs and f2fs compression in future build?
5. Is NTFS file format for OTG and SD Card readable? (Some roms can't read my ntfs SD card which I use for backups/ROM changing)
Click to expand...
Click to collapse
to
1. its Aryan Tress yes anx should work i dont use it i use gcam
2. no since this is no linage feature like i said its a clean los build i dont modify anything
3. not yet i can add it if needed
4. erofs no since los trees if they add support for it i can switch to it f2fs is already look at github i only revertet erofs related changes
5. should work but im not really sure dont have sdcard in ntfs

Stan m said:
Okay thanks! Why the miui firmware though? I moved from arrow os 11 to 12 without flashing any firmware or anything else...
Click to expand...
Click to collapse
its oss yes you can flash firmware its not a must its just to keep everything up2date if you already on last firmware its not needed (comming from miui or already flashed from other oss rom)

_JaSoN_ said:
to
1. its Aryan Tress yes anx should work i dont use it i use gcam
2. no since this is no linage feature like i said its a clean los build i dont modify anything
3. not yet i can add it if needed
4. erofs no since los trees if they add support for it i can switch to it f2fs is already look at github i only revertet erofs related changes
5. should work but im not really sure dont have sdcard in ntfs
Click to expand...
Click to collapse
Tysm!
Signature spoof is not really a big problem since there's a workaround for microg without signature spoof. Also thank goodness no erofs, I kinda like having system as r/w. OTA not a problem as well, would be cool though for a TG channel as a way to get notified on updates in the meantime. For anx and ntfs, welp I hope it works since I personally prefer stock camera images and use my SD card to restore backups.
I'm definitely going to give this rom a shot when I get bored of my current ROM.

_JaSoN_ said:
its oss yes you can flash firmware its not a must its just to keep everything up2date if you already on last firmware its not needed (comming from miui or already flashed from other oss rom)
Click to expand...
Click to collapse
Stan m said:
Can you please tell me the difference between vantom kernel and the default?
Also are you planning to make this official?
Click to expand...
Click to collapse
What about this?
Thank you.

Stan m said:
What about this?
Thank you.
Click to expand...
Click to collapse
are you talking about stock miui kernel ? look here https://forum.xda-developers.com/t/...leepy-yuki-delta-and-doraemon-kernel.4398423/ basicly is just upstreamed and added a few features look github or look the linked thread for changes i cant write them all

_JaSoN_ said:
are you talking about stock miui kernel ? look here https://forum.xda-developers.com/t/...leepy-yuki-delta-and-doraemon-kernel.4398423/ basicly is just upstreamed and added a few features look github or look the linked thread for changes i cant write them all
Click to expand...
Click to collapse
So that means this build will never be official? Because i think lineage requires stock kernel

Stan m said:
So that means this build will never be official? Because i think lineage requires stock kernel
Click to expand...
Click to collapse
LineageOS doesn't require the stock kernel. You can't go official with the current device sources (as they are right now anyway) as LineageOS already has a different sm6150-common tree.

Aryannn999 said:
LineageOS doesn't require the stock kernel. You can't go official with the current device sources (as they are right now anyway) as LineageOS already has a different sm6150-common tree.
Click to expand...
Click to collapse
so why not use that?

Anyone using this rom want to share their opinion?

Stan m said:
Anyone using this rom want to share their opinion?
Click to expand...
Click to collapse
I'm using it for about 2 weeks... very good in my opinion, battery friendly no draining, charging fast... the alarm can wakeup phone from power off state...

Hellera said:
I'm using it for about 2 weeks... very good in my opinion, battery friendly no draining, charging fast... the alarm can wakeup phone from power off state...
Click to expand...
Click to collapse
Thanks for the reply! Btw how are you using it since 2 weeks? this was released just 5 days ago

...maybe I was confused because I'm using lineage too on another phone, Oneplus-6T... sorry about this!