How do I go about rooting android 13 stable (update 2) ?
IGKID said:
How do I go about rooting android 13 stable (update 2) ?
Click to expand...
Click to collapse
Follow my guide. Pretty straight forward
NE2213 android 13 magisk stock boot patched c20
I have android 13 NE2215
Everytime I try to boot patched boot.image it goes to Qualcomm crashdump mode...is there a working way to root oxygen os 13 c20 on NE2211?
wshyar said:
Everytime I try to boot patched boot.image it goes to Qualcomm crashdump mode...is there a working way to root oxygen os 13 c20 on NE2211?
Click to expand...
Click to collapse
Where did you obtain your patched boot image?
It's always best to get it yourself and patch it yourself.
dladz said:
Where did you obtain your patched boot image?
It's always best to get it yourself and patch it yourself.
Click to expand...
Click to collapse
From OOS 13 payload.bin using fastboot enhance tool or payload dumper tool, it doesn't work with either of them..
wshyar said:
From OOS 13 payload.bin using fastboot enhance tool or payload dumper tool, it doesn't work with either of them.
Click to expand...
Click to collapse
That is the correct way to do it.
Are you using the latest Magisk? Was the firmware you extracted it from the full firmware? Or a smaller incremental zip?
Full zip is around 4.2GB
IGKID said:
I have android 13 NE2215
Click to expand...
Click to collapse
follow my thread
dladz said:
That is the correct way to do it.
Are you using the latest Magisk? Was the firmware you extracted it from the full firmware? Or a smaller incremental zip?
Full zip is around 4.2GB
Click to expand...
Click to collapse
I Am using latest Magisk version and even tested lower versions.
The firmware is about 4.85gb at first it installs version NE2211_11_C.19
But i updated it to NE2211_11_C.20 and checked the incremental update in fastboot enhance tool while extracting boot.img..
wshyar said:
I Am using latest Magisk version and even tested lower versions.
The firmware is about 4.85gb at first it installs version NE2211_11_C.19
But i updated it to NE2211_11_C.20 and checked the incremental update in fastboot enhance tool while extracting boot.img..
Click to expand...
Click to collapse
? It installs C_19 then it's not the one you want, you need to regrab C_20, use oxygen updater if it's available.
If not then I'm not sure buddy
g96818 said:
follow my thread
Click to expand...
Click to collapse
Will try it ton and get back to you.
Update: I do not understand what is going on in your thread. It's all over the place. For example you say use stock and patch it yourself or download patched bootloader. Can you provide a more simple tutorial please.
Does anyone root Android 13 succefully yet?
Xainn said:
Does anyone root Android 13 succefully yet?
Click to expand...
Click to collapse
Yes, same as oos12
1. Download zip rom and extract payload.bin
2. Use Fastboot Enhance export boot.img from payload.bin
3. Install Magisk Manager on your phone
4. Copy boot.img to your phone storage
5. Patch boot.img by Magisk Manager
6. Copy Patched file (in Download folder) to your PC and reboot phone to Bootloader Mode
7. Open Windows Power Shell at folder has Patched file and run command
fastboot flash boot patched_file_name.img
fastboot reboot
tranthengoc said:
1. Download zip rom and extract payload.bin
2. Use Fastboot Enhance export boot.img from payload.bin
3. Install Magisk Manager on your phone
4. Copy boot.img to your phone storage
5. Patch boot.img by Magisk Manager
6. Copy Patched file (in Download folder) to your PC and reboot phone to Bootloader Mode
7. Open Windows Power Shell at folder has Patched file and run command
fastboot flash boot patched_file_name.img
fastboot reboot
Click to expand...
Click to collapse
You wouldn't need Fastboot reboot as you're telling the device to boot when typing Fastboot boot.
Spot on otherwise
Related
Patched boot for 11.0.2.1.GM21BA
https://1drv.ms/u/s!Ao2BZNjF2tsMhNYGcYCAZ4Sd_oV9hw?e=na5d3F
Stock
boot.img
IMG File
1drv.ms
thank you
gchospital said:
thank you
Click to expand...
Click to collapse
can you share Patched boot for 11.0.2.1.GM21AA
loshabih said:
Patched boot for 11.0.2.1.GM21BA
https://1drv.ms/u/s!Ao2BZNjF2tsMhNYGcYCAZ4Sd_oV9hw?e=na5d3F
Stock
boot.img
IMG File
1drv.ms
Click to expand...
Click to collapse
Hello, access error!is there any other net disk? thanks.
Update: I couldn't upload to drive, i've tried onedrive link and it is working fine
I Wil upload them on drive tomorrow,
buy the way this rom has a the best battery life in all oos11 and you will notice the difference,
I've just came from op5
EU 11.0.2.1.GM21BA patched boot image
magisk_patched-23000_FFeJb.img
drive.google.com
These patched files doesn't seem to be working for me either... just stuck in boot loop. WHY is it so hard to root Android 11?
Skyrider said:
These patched files doesn't seem to be working for me either... just stuck in boot loop. WHY is it so hard to root Android 11?
Click to expand...
Click to collapse
You need to be in the same version and region
What's your Android 11 version and oneplus 7 pro region?
5star02707 said:
You need to be in the same version and region
What's your Android 11 version and oneplus 7 pro region?
Click to expand...
Click to collapse
Thanks for the reply, but I got it all sorted. Before I upgraded to Android 11, apparently the magisk modules that were still installed messed up and I had to remove them first before being able to root the device.
Skyrider said:
Thanks for the reply, but I got it all sorted. Before I upgraded to Android 11, apparently the magisk modules that were still installed messed up and I had to remove them first before being able to root the device.
Click to expand...
Click to collapse
Great to hear. Enjoy your new rooted A11 device
How to update to 11.0.2.1 version and keep the root.Please guide me.
Thanks.
prashant_001 said:
How to update to 11.0.2.1 version and keep the root.Please guide me.
Thanks.
Click to expand...
Click to collapse
Download oxygen updater
Download full stable build on your 7 pro version
Once downloaded go to your setting and system update
Select local upgrade, wait til the update finishes but DO NOT RESTART
Once the update reaches to 100% go to Magisk
Select Magisk install
Select install to inactive slot (after ota)
Watch magisk load and NOW YOU CAN REBOOT
Thank you so much mate..!! @5star02707
5star02707 said:
Download oxygen updater
Download full stable build on your 7 pro version
Once downloaded go to your setting and system update
Select local upgrade, wait til the update finishes but DO NOT RESTART
Once the update reaches to 100% go to Magisk
Select Magisk install
Select install to inactive slot (after ota)
Watch magisk load and NOW YOU CAN REBOOT
Click to expand...
Click to collapse
Is there a way to keep TWRP as well?
nonleft said:
Edited : video below
Click to expand...
Click to collapse
nonleft said:
Is there a way to keep TWRP as well?
Click to expand...
Click to collapse
Video to guide you
Same, just an extra step in between
Download oxygen updater
Download full stable build on your 7 pro version
Once downloaded go to your setting and system update
Select local upgrade, wait til the update finishes but DO NOT RESTART
Once the update reaches to 100% go to Magisk
Magisk Module install TWRP A/B Retention script again DO NOT REBOOT
Go to Magisk 1st page select Magisk install
Select install to inactive slot (after ota)
Watch magisk load and NOW YOU CAN REBOOT
loshabih said:
Patched boot for 11.0.2.1.GM21BA
https://1drv.ms/u/s!Ao2BZNjF2tsMhNYGcYCAZ4Sd_oV9hw?e=na5d3F
Stock
boot.img
IMG File
1drv.ms
Click to expand...
Click to collapse
Could U plz share a patched root.img from 11.0.5.1.GM21BA?
Frodolo said:
Could U plz share a patched root.img from 11.0.5.1.GM21BA?
Click to expand...
Click to collapse
Here you go
File on MEGA
mega.nz
Root un miui 12.5.2?
i think root is useless. miui 12.5.2 is perfect. if you want debloat simply use fastboot adbtools.jar, without root. but if you want root, you had to wait miui 12.5.2 fastboot firmware. for patch boot.img via magisk and install the boot patched image via fastboot (but first you had to unlock bootloader). so my suggesion is debloat with bootloader unllocked but without root (i suppose you already have unllocked)
xdferchoz2 said:
Root un miui 12.5.2?
Click to expand...
Click to collapse
Download recovery rom for 12.5.2 unzip it you will get payload.bin search how to extract payload.bin on google you will find guide and python script run that script volia boot.img and all will be extracted from recovery rom patch that boot image from magisk and flash it via fastboot cammand
Sanny45 said:
Download recovery rom for 12.5.2 unzip it you will get payload.bin search how to extract payload.bin on google you will find guide and python script run that script volia boot.img and all will be extracted from recovery rom patch that boot image from magisk and flash it via fastboot cammand
Click to expand...
Click to collapse
is not a Simply procedure... is more safe wait fastboot official rom
Hi, i'm trying to root my CN version 13.0.5 without the twrp, I'm using the magisk to patch the boot file, but after patch and use the command "fastboot flash boot boot.img, the mi 11 ultra just stuck in the mi logo. I'm not been able to root my phone, right now, how to root the CN version 13.0.5?
i did the same root with the android 11 and worked, something change?
hi, did you install magisk canary and not magisk stable?
I have just Root Xiaomi.eu A12 Miui13 with the same method and it work.
Hi. FIrst - better to use Magisk 23.0 - as you will still have Magisk hide. But more important - just the "fastboot boot boot.img" command instead. Once you have booted without issues you can go into Magisk and patch the real boot image file from there and restart. This is how it always worked for me. Not really sure what is the big difference there but as I said - that worked for me.
When you are running the miui 13, copy the boot.img from fastboot folder to your phone(remember the location). Open magisk app, choose install and search for boot.img on your phone. After patching is done, copy the patched file into your fastboot folder on pc. Boot into fastboot, type fastboot flash boot (and drag the patched file from fastboot folder here) and hit enter. after flashing fastboot reboot
Thanks for the help, i'll try to patchin a few hours and back here to give the feedback!
marcel112 said:
When you are running the miui 13, copy the boot.img from fastboot folder to your phone(remember the location). Open magisk app, choose install and search for boot.img on your phone. After patching is done, copy the patched file into your fastboot folder on pc. Boot into fastboot, type fastboot boot (and drag the patched file from fastboot folder here) and hit enter. after flashing fastboot reboot
Click to expand...
Click to collapse
Does that Format my Data? And how do i remove the Patch(remove magisk)?
Afg Playa said:
Does that Format my Data? And how do i remove the Patch(remove magisk)?
Click to expand...
Click to collapse
It does not format. That's just for root. You can flash the rom in fastboot again or flash the boot.img again from the folder images
thiagoserrao said:
Thanks for the help, i'll try to patchin a few hours and back here to give the feedback!
Click to expand...
Click to collapse
Did IT Work?
Afg Playa said:
Did IT Work?
Click to expand...
Click to collapse
Using CN no, i tried with the rom downloaded but didn't worked. So i take a step and installed the EU version, not been able to connect to android auto and other stuffs was killing me!
After install the EU version, i just did the same steps to root the boot, and worked without problem
thiagoserrao said:
Using CN no, i tried with the rom downloaded but didn't worked. So i take a step and installed the EU version, not been able to connect to android auto and other stuffs was killing me!
After install the EU version, i just did the same steps to root the boot, and worked without problem
Click to expand...
Click to collapse
Great, It also worked for me Xiaomi.eu 13.0.9.0.
I have difficulties too rooting my Mi 11 Ultra with Android 12. I have installed the latest canary of Magisk and when I patch the boot.img and flash it the device stucks on Android logo. When I boot the device with fastboot boot magisk_patched***.img I'll get a black screen.
Can anybody post a patched boot.img from Xiaomi.eu 13.0.9.0 Rom? Perhaps it works when I flash this one on my device.
User1977 said:
I have difficulties too rooting my Mi 11 Ultra with Android 12. I have installed the latest canary of Magisk and when I patch the boot.img and flash it the device stucks on Android logo. When I boot the device with fastboot boot magisk_patched***.img I'll get a black screen.
Can anybody post a patched boot.img from Xiaomi.eu 13.0.9.0 Rom? Perhaps it works when I flash this one on my device.
Click to expand...
Click to collapse
i just lost my root without reason, i just restarted my phone, than no root anymore and not being able to installing again ;D. what a hell
Start from the beginning by flashing unpatched boot.img and use Magisk v23. V24 has nothing but problems. I was frustrated for a few hours with it and going back to v23 solved everything.
Hi Guys, so we got a pilot release for MIUI 13. Here is the guide to flash/update using Xiaomi.eu ROM:
Update to MIUI13 (Android 12) from MIUI EU V12.5
A TWRP backup of current rom is recommended before following the next steps
You can follow my guide to know how you do it here: https://forum.xda-developers.com/t/...-flash-twrp-root-device-flash-eu-rom.4402203/
Download Fastboot EU rom from here: https://sourceforge.net/projects/xi...13.0.1.0.SKDMIXM_v13-12-fastboot.zip/download
Extract all the contents in zip file to any normal folder
We will be using Bootloader/Fastboot mode. Boot into Bootloader: Power off your mobile then hold Volume Down + Power Button till Fastboot bunny pops up
Connect your device to PC
To update use the updater executable for respective OS platform windows_fastboot_update_rom.bat (for windows)
For clean flash you can use windows_fastboot_first_install_with_data_format.bat (for windows)
Follow the procedures as per above choice
Wait patiently while the PC does its Job.
You may see a long pause post “writing Cust” command depending on PC configuration. try hitting any letter key on your keyboard, the process continues this way.
You may hit letter key whenever you see unusual pauses during pushing of super partition file sparse sending 1 of 9 to 9 of 9
Wait till process finishes and reboots
Flash Magisk and Root
Copy boot.img from the extracted ROM images folder to your mobile
Global Boot.img (use this if you wanna root Globoal Miui13.
Install latest Magisk app from here: https://github.com/topjohnwu/Magisk/releases/download/v24.1/Magisk-v24.1.apk
Install the app and select install in Magisk and choose patch source file and select the boot.img you copied.
Wait for the process, copy the new patched image form mobile to your PC
Now lets flash the new pathced boot image using below, replace with path to boot image in place of “< --- >”
fastboot flash boot_a “<magisk_patched.img>”
fastboot flash boot_b “<magisk_patched.img>”
Reboot and check the magisk app
Follow my guide here to pass safteyNet: https://forum.xda-developers.com/t/...-flash-twrp-root-device-flash-eu-rom.4402203/
Update to miui 13 can't flash via twrp?
Yuditkiichi said:
Update to miui 13 can't flash via twrp?
Click to expand...
Click to collapse
Only the stock global rom is for recovery, xiaomi.eu rom is for fastboot.
I can boot the twrp.img, but I can't navigate in the main menu. It won't do anything
dandris86 said:
I can boot the twrp.img, but I can't navigate in the main menu. It won't do anything
Click to expand...
Click to collapse
Probably twrp is not yet compatible with the new android 12 firmware, some users also reported the same problem.
sushuguru said:
Probably twrp is not yet compatible with the new android 12 firmware, some users also reported the same problem.
Click to expand...
Click to collapse
Thanks for the quick reply
I'm updated whiteout format data. Everything looks ok.
Alright, so I was previously rooted on 12.5 (global), non twrp. its not necessary for rooting.
I did the ota update to v13 miui (global). but as its a switch between v11 and v12 of android its not possible to install magisk into an empty a/b slot.
I tried to fastboot flash your global miui boot.img after patching it with magisk and it did not work.
I suspect the boot.img to not be compatible with the global rom.
So I opted to flash the Eu fastboot version of miui 13, I set up the phone.
Then patched the stock boot.img with magisk and fastboot that. Done phone is now rooted on v13 miui. and passing safety net check.
phone data was lost as i had to switch from global to eu.
Can anyone confirm that we get widgets and other features that are not found in the miui 13 global I want to make the switch but I want to know what would still be missing
The global fastboot rom is now released. follow same steps above to have rooted global non twrp.
V13.0.1.0.SKDMIXM (https://xiaomifirmwareupdater.com/miui/vili/stable/V13.0.1.0.SKDMIXM/)
-Edit-
Ive also updated to the latest via ota V13.0.2.0.SKDMIXM (Stable beta). but as it detected the boot.img was modified it downloaded the entire recovery rom. Installed. Lost root access.
I then fastboot re flashed the patched boot.img from the V13.0.1.0.SKDMIXM and it works.
so im rooted/ safetynet check passed on V13.0.2.0.SKDMIXM (Global)
roms can be found here https://xiaomifirmwareupdater.com/miui/vili/
Downloaded the latest EEU vili_eea_global_images_V13.0.8.0.SKDEUXM_20220224.0000.00_12.0_eea_38cc4dcea7.tgz
but the only .bat files I see are
flash_all.bat, flash_all_except_storage.bat and flash_all_lock.bat
BettlePimp said:
Downloaded the latest EEU vili_eea_global_images_V13.0.8.0.SKDEUXM_20220224.0000.00_12.0_eea_38cc4dcea7.tgz
but the only .bat files I see are
flash_all.bat, flash_all_except_storage.bat and flash_all_lock.bat
Click to expand...
Click to collapse
It's a fastboot stock rom which this flash with miflash or with bat files
This thread is about XIAOMI EU custom rom
This phone is so ****ty, I'm trying to do OTA update via 100mbit/'s network in netherlands from about two f***NG weeks and it can not be finished. I can't belive that I have paid 800€ for so big ****!
Hello
For the ROOT it works perfectly (without TWRP, just with magisk)
You unlock the bootloader and wait 1 week, you extract the boot.img, you modify the file with magisk and do the command wtih adb with the modified boot
Very simple
(If you want to extract the rom file by yourself you can just extract with a little tool after your download the rom
, you can extract the fil with the payloaf file, for that, just have a look in the method 3 in this link)
I flashed MIUI 14 from TWRP and it's working fine. The problem is that none of the Magisk modules are loading after a reboot.
I tried both Magisk 25.2 and Magisk Canary (v831a398b 25206). Still unable to load the modules. Anyone got it working?
HI
is the flashed MIUI 14 the chinese version ?
phoenixuwe said:
HI
is the flashed MIUI 14 the chinese version ?
Click to expand...
Click to collapse
There is not and never will be a CN rom for this device.
Did you download the recovery rom and flash that? (That's what I did)
After I flashed that recovery rom my magisk didn't work anymore as expected since the boot partition gets overwritten.
So what you do is that you download the "Payload Dumper" python program, I used this one:
GitHub - vm03/payload_dumper: Android OTA payload dumper
Android OTA payload dumper. Contribute to vm03/payload_dumper development by creating an account on GitHub.
github.com
With python installed you open a terminal and navigate to the downloaded payload dumper you type in this command:
Code:
python payload_dumper.py payload.bin
After a while it errors out (atleast it did for me) but there should be an output folder with a nicely extracted boot.img file!
Copy that file to your phone and use magisk to patch it, then transfer it back to your computer and flash it with fastboot with the usual:
Code:
fastboot flash boot boot.img
After that my magisk worked perfectly again
ExtremelyMAD said:
Did you download the recovery rom and flash that? (That's what I did)
After I flashed that recovery rom my magisk didn't work anymore as expected since the boot partition gets overwritten.
So what you do is that you download the "Payload Dumper" python program, I used this one:
GitHub - vm03/payload_dumper: Android OTA payload dumper
Android OTA payload dumper. Contribute to vm03/payload_dumper development by creating an account on GitHub.
github.com
With python installed you open a terminal and navigate to the downloaded payload dumper you type in this command:
Code:
python payload_dumper.py payload.bin
After a while it errors out (atleast it did for me) but there should be an output folder with a nicely extracted boot.img file!
Copy that file to your phone and use magisk to patch it, then transfer it back to your computer and flash it with fastboot with the usual:
Code:
fastboot flash boot boot.img
After that my magisk worked perfectly again
Click to expand...
Click to collapse
You don't need to do all that. Just flash Magisk_25.2.zip in TWRP and you get root. As simple as that!
My problem was that the Pixelify module was causing bootloop and once I removed that module, all my other magisk modules worked fine.
Hmm that's weird, maybe my zipfile was corrupt or anything because just reflashing it through TWRP didn't do it for me. But yeah if that works then it's significantly simpler
Do you have a link to the MIUI 14 Rom?
Spillunke said:
Do you have a link to the MIUI 14 Rom?
Click to expand...
Click to collapse
Sure thing, here you go:
Xiaomi Software Update Download (Recovery ROM) - Mi Firmware
Download Xiaomi Software Update and Update your Xiaomi phones with Stable Recovery ROM using official Xiaomi Flash Tool or OTA Method.
mifirmware.com
or a direct link:
https://bigota.d.miui.com/V14.0.3.0.TKDEUXM/miui_VILIEEAGlobal_V14.0.3.0.TKDEUXM_ba28c79ffe_13.0.zip
ExtremelyMAD said:
Hmm that's weird, maybe my zipfile was corrupt or anything because just reflashing it through TWRP didn't do it for me. But yeah if that works then it's significantly simpler
Click to expand...
Click to collapse
Of course, flashing Magisk zip in TWRP works as it's a time tested strategy and have been doing this forever.
ExtremelyMAD said:
Sure thing, here you go:
Xiaomi Software Update Download (Recovery ROM) - Mi Firmware
Download Xiaomi Software Update and Update your Xiaomi phones with Stable Recovery ROM using official Xiaomi Flash Tool or OTA Method.
mifirmware.com
or a direct link:
https://bigota.d.miui.com/V14.0.3.0.TKDEUXM/miui_VILIEEAGlobal_V14.0.3.0.TKDEUXM_ba28c79ffe_13.0.zip
Click to expand...
Click to collapse
The roms on this site are all marked STABLE while some are STABLE BETA.
RainGater said:
Of course, flashing Magisk zip in TWRP works as it's a time tested strategy and have been doing this forever.
Click to expand...
Click to collapse
Exact, provided you use the right TWRP.
NOSS8 said:
Exact, provided you use the right TWRP.
Click to expand...
Click to collapse
No officially supported twrp version for miui 14 yet, what is the right twrp for now?
mogging said:
No officially supported twrp version for miui 14 yet, what is the right twrp for now?
Click to expand...
Click to collapse
You can use the A12 to flash the A13, since the system is in A12. No need for TWRP to root or install mods.
Hello
Is this module safe to install?
How to get iOS like animations and recent menu in MIUI - xiaomiui
Xiaomi's MIUI is already pretty similar compared with iOS. But the thing is the company has been removing animations from some of its budget smartphones like
xiaomiui.net