Database Develop

[NEW LAYOUT][ROM] Unofficial CyanogenMod 13.0 for HTC Incredible S [Version 1.2]

CyanogenMod 13.0 for HTC Incredible S​
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 6.0, which is designed to increase performance and reliability over stock Android for your device.
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
About CyanogenMod
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
Not Working / Bugs
Some graphical glitches.
Screen Recorder.
Bluetooth switch in settings does not turn on Bluetooth.
How to Install
Make sure you have installed this recovery and switched to the new data layout.
Download the ROM from below
Download GApps from below
Attach the phone to your computer
Copy the ROM to your phone
Copy the GApps to your phone
Boot into recovery
If this is your first time installing this ROM then factory reset the phone from recovery
If you want to upgrade the ROM, flash the new version on top, and only wipe cache and dalvik cache
Go to Install and select the ROM zip file
After ROM has finished installing, flash the GApps
Go to Reboot -> System
Enjoy
Download
CM13.0
Google Apps
XDA:DevDB Information
CyanogenMod 13.0 for HTC Incredible S, ROM for the HTC Incredible S
Contributors
rqmok
Source Code: https://github.com/rqmok/android_device_htc_vivo/tree/cm-13.0
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.0.x
ROM Firmware Required: TWRP 3.x (New Layout)
Based On: CyanogenMod
Version Information
Status: Stable
Current Stable Version: 1.1
Stable Release Date: 2016-07-01
Created 2016-06-22
Last Updated 2016-07-19

Changelog
Version 1.2
- Sync with latest CyanogenMod sources.
- Revert back to older Camera app.
- Revert back to older media HAL.
- Revert back to older vidc drivers.
- Reserve 5MB for PMEM again.
- Add support for hitachi panel (probably doesn't work).
- Clean up and update panel code.
- Increase RAM to 607MB.
- Change GPS AMSS version (GPS still doesn't work).
Version 1.1
- Sync with latest CyanogenMod sources.
- Disable Atlas service to save RAM.
- Cherry-pick some changes for telephony framework.
- Revert back to old bcmdhd code.
- Revert back to old wifi code.
- Increase RAM by 5MB.
Version 1.0
- Initial Release

Reserved

Reserved 2

rqmok said:
Changelog
Version 1.0
- Initial Release
Click to expand...
Click to collapse
Sucsessfuly booted on my IncS! For now, works perfectly! Will be testing it now. Thank you so much!

After succesfull instalation i still have 5.1.1, cm12.
I've tried several times. Switched to new layout, but
- Go to "wipe". & - Press "Format Data". formats only sd card.

prezii said:
After succesfull instalation i still have 5.1.1, cm12.
I've tried several times. Switched to new layout, but
- Go to "wipe". & - Press "Format Data". formats only sd card.
Click to expand...
Click to collapse
"Format Data" is only meant to format sd card. After this, you need to go to Wipe -> Advanced Wipe and then select everything and wipe it. After that, go to Reboot -> Recovery. When you reboot back into recovery, copy cm13 and gapps to the sdcard, and flash them.
If you properly follow the instructions I have provided in the recovery thread and this thread then it is not hard.

Got an "Encryption unsuccessful" message during system load
---
It works! Great job, rqmok!

Good job,keep your work

rqmok said:
"Format Data" is only meant to format sd card. After this, you need to go to Wipe -> Advanced Wipe and then select everything and wipe it. After that, go to Reboot -> Recovery. When you reboot back into recovery, copy cm13 and gapps to the sdcard, and flash them.
If you properly follow the instructions I have provided in the recovery thread and this thread then it is not hard.
Click to expand...
Click to collapse
After flash boot.img 6.0 started. But "encryption unsuccessful" appeared, as above, reset phone is not solution....

dimmonz said:
Got an "Encryption unsuccessful" message during system load
---
It works! Great job, rqmok!
Click to expand...
Click to collapse
Can you please share how you fixed the problem? Did you have to format and wipe everything again?

Encryption Unsuccessful - Reset Phone
Finally successfully installed CyanogenMod 13.0 on HTC Incredible S [Version 1.0]
I was getting same error: Encryption Unsuccessful ..... Reset Phone
What I did was following and was successful. I am sure some of the steps might be unnecessary and be skipped:
1. Inserted SD card (16GB) into laptop deleted all partitions and recreated only one primary partition with format FAT32
2. Reinserted SD card to phone and into twrp recovery mode (ver 3.0.2.0) and performed following operations:
- Format Data
- Advance Wipe - Selected all partitions to wipe.
3. Just to check what has happened to my SD card, I inserted into laptop and checked using "MiniTool Partition Wizard Free". I found SD card had format ext3.
4. While in recovery mode copied CM13 ROM and Gapps to SD card and installed zips.
5. Rebooted to system. Soon after ---- CyanogenMod logo ---- optimizing app 1 of 11 ---- Marshmallow setup screen
Did not had much time to play with but for sure Camera, YouTube & Play Store definitely working.

gosain2000 said:
Finally successfully installed CyanogenMod 13.0 on HTC Incredible S [Version 1.0]
I was getting same error: Encryption Unsuccessful ..... Reset Phone
What I did was following and was successful. I am sure some of the steps might be unnecessary and be skipped:
3. Just to check what has happened to my SD card, I inserted into laptop and checked using "MiniTool Partition Wizard Free". I found SD card had format ext3.
4. While in recovery mode copied CM13 ROM and Gapps to SD card and installed zips.
Did not had much time to play with but for sure Camera, YouTube & Play Store definitely working.
Click to expand...
Click to collapse
How did you copied CM13 in recovery mode? I can't...

prezii said:
How did you copied CM13 in recovery mode? I can't...
Click to expand...
Click to collapse
Make sure you reboot recovery after formatting everything from the recovery.

rqmok said:
Can you please share how you fixed the problem? Did you have to format and wipe everything again?
Click to expand...
Click to collapse
Noticed that sdcard was formatted into FAT during ROM & APPs copying under Windows. Just copied them under linux mint without sdcard formatting.
prezii said:
How did you copied CM13 in recovery mode? I can't...
Click to expand...
Click to collapse
I can't do this too whith usb connection. While
Code:
adb devices
all the way returns that my htc is unauthorised,
Code:
adb push
does not work and i can't beat it. So i just get sdcard out to pc and copied files directly.
Now looking for ROOT...

rqmok said:
Make sure you reboot recovery after formatting everything from the recovery.
Click to expand...
Click to collapse
Again:
Procedure, after flashing TWRP 3.0.2-0 and boot.img.
1. Insert SD card to phone and into twrp recovery mode (ver 3.0.2.0) and performed following operations:
- Format Data
- Advance Wipe - Selected all partitions to wipe.
3. In recovery mode copied CM13 ROM and Gapps to SD card (important: works in win7, doest work in win10!) and installed zips.
5. Rebooted to system. Soon after ---- CyanogenMod logo ---- yes it WORKS!!!! Thanks brothers!!!
Still testing...
CM13 doesn't works without SD card, Encryption problem appeared.

Copy CM13 to SD card in recovery mode
prezii said:
How did you copied CM13 in recovery mode? I can't...
Click to expand...
Click to collapse
In Recovery mode, Under mount you have option to disable/enable MTP. If MTP is enabled you can transfer files to SD Card. However correct drivers is important. You will not see device as a separate drive but under This PC/ My computer.
Further sharing my experience:
I successfully installed CM13 using windows 10, Surface pro 3. There was a time when I could communicate with HTC Incredible S using ADB commands only and not fastboot commands. When HTC is in fastboot mode it uses different driver. After extensive reading on XDA I found that on installing compatible HTC sync drivers, under device manager you would see two separate Sections. Under section Android USB Device will be My HTC and under Portable Devices section would be HTC Incredible S. I use to get Error code 10 when my HTC was in fastboot mode. Once I changed its driver (found on XDA) problem got solved. i.e I could communicate in fastboot mode and in recovery or booted up mode. After this I am working with Windows 10 most of times.
Also use latest version of ADB to use ADB sideload feature.

tell me, do the s-off to do ??

S-off HTC incredible S
raiden.80 said:
tell me, do the s-off to do ??
Click to expand...
Click to collapse
Follow instructions http://forum.xda-developers.com/showthread.php?t=1373697
Download all required software from the links in the thread. It works.

I have just released version 1.1. The changes have been listed, but the biggest change is reverting back to older wifi drivers in the kernel. This should make the wifi connect to the network even faster. Also, it should make wifi more stable.

[BETA][DUK] TWRP 3.1.1-1 [+ROOT]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This is only for Honor 8 Pro (DUK)
Code:
OpenKirin presents unofficial TWRP for stock EMUI 5.x.
Intended for usage on stock emui 5.x in combination with unlocked bootloader .
Installation Instructions
Code:
1. Enter fastboot mode on unlocked device
2. flash recovery using the following command: fastboot flash recovery twrp-3.1.1-1-duk.img
3. reboot to recovery!
Rooting Methods
Code:
[B][U]1. Official PHH Superuser Beta 310[/U][/B]
1. download and flash [URL="http://superuser.phh.me/superuser-r310-beta.zip"]official PHH Superuser Beta 310[/URL]
2. install "Phh Superuser" from Google Play
3. Enjoy!
Downloads
Code:
[LIST]
[URL="https://github.com/OpenKirin/android_device_honor_duk/releases/download/3.1.1-1/twrp-3.1.1-1-duk.img"][U]download twrp-3.1.1-1-duk.img[/U][/URL]
[/LIST]
FAQ
Code:
Q: What's the code status?
A: 25. June 2017
Q: which H8 Pro models are supported?
A: every model should be supported.
Q: Can i use this TWRP with decrypted /data?
A: Yes you can! (Check FAQ)
Q: Can i install Magisk?
A: No (encrypted /data), Yes (decrypted /data)
Q: Does official SuperSU work?
A: No (encrypted /data), Yes (decrypted /data)
Q: ETAs?
A: No.
Going back from decrypted -> encrypted?
Code:
1. Format /data inside of TWRP
2. Flash eRecovery & Kernel from your currently installed Stock ROM Build
3. Do a factory reset inside of eRecovery
5. Let device boot up
6. Install your current firmware hw_data package & SuperSU using TWRP again
Want to decrypt? No problem.
Code:
1. Format /data inside of TWRP
2. Flash a kernel with fileencryption disabled in fstab
3. bootup your device
Special Thanks
Code:
* [URL="https://forum.xda-developers.com/member.php?u=2335078"]surdu_petru[/URL]
* [URL="https://forum.xda-developers.com/member.php?u=7354786"]XePeleato[/URL]
XDA:DevDB Information
TWRP, Tool/Utility for the Honor 8 Pro
Contributors
OldDroid, surdu_petru, XePeleato
Source Code: https://github.com/OpenKirin/android_device_honor_duk
Version Information
Status: Beta
Created 2017-06-23
Last Updated 2017-06-25

Reserved
Changelog
Code:
[B]TWRP 3.1.1-1[/B]
* fix twrp on emmc based devices

Man that was fast. Will definitely flash this after I get my H8 Pro.
Sent from my Honor 8 using XDA Labs

Hello,
I tested the package, unfortunately after the flash and first boot impossible to return under android.
If I remember correctly there was a problem of mount point.
To get out I had to flasher the recovery and system partitions of the original rom.
Having to reset my phone I have no log, but if you need anything else do not hesitate.
@ +
Via google translate

blattes86 said:
Hello,
I tested the package, unfortunately after the flash and first boot impossible to return under android.
If I remember correctly there was a problem of mount point.
To get out I had to flasher the recovery and system partitions of the original rom.
Having to reset my phone I have no log, but if you need anything else do not hesitate.
@ +
Via google translate
Click to expand...
Click to collapse
this should work for every h8 pro utilizing emmc storage:
https://drive.google.com/open?id=0BxWP2gF_0Bd_OHBPWDctZmJCanc
It has been tested.
Regards

Can we use Magisk instead? Or the loop issue back in Honor 8 is also here?

OldDroid said:
this should work for every h8 pro utilizing emmc storage:
It has been tested.
Regards
Click to expand...
Click to collapse
I flashed it, it works fine.
Thanks

adriansticoid said:
Can we use Magisk instead? Or the loop issue back in Honor 8 is also here?
Click to expand...
Click to collapse
Magisk 13 works fine.
Just flashed the Magist beta and installed the Magisch Manager 5.

-=MoRpH=- said:
Magisk 13 works fine.
Just flashed the Magist beta and installed the Magisch Manager 5.
Click to expand...
Click to collapse
That's great news. Thanks for confirming. :highfive:
Sent from my Honor 8 using XDA Labs

I flashed emmc version and supersu. For going in twrp I've to clic in the middle of the volume button and the power on.

Interesting, i tried to install it but i'm stuck with installion...i know how to enter fastboot mode with phone plugged to my computer with android sdk on, but the adb files look to be missing when i check with cmd...
Can anyone here give a quick tutorial ? Thanks

New Version (3.1.1-1) available - You can find more infos in OP.
This release fixes partition mounting on emmc 5.1 based devices
Source code is now also up and can be built!
https://github.com/OpenKirin/android_device_honor_duk
Regards

Wow that was faster than I could learn to do it.
Great job. May I ask how you got the important informations to build this?
Did you inject su into the image to gain root and then read all the detailed data through terminal or adb or root file explorer?
Just asking cause i train my brain more and more in my spare time and want to get behind the knowledge base to learn. :good:

First of all thank you for your work, I got the Recovery, root, Magisk, etc. running.
I have 2 Questions:
1. the internal storage when I boot to the recovery looks like enrypted (lots of random named folders). Is it possible to decrypt it for now, since there is currently no custom kernel available?
2. Can I flash the Firmware update to 130b in TWRP? If yes, wich package do I need to choose?
Cheers

Would this work on the Chinese V9 variant?

smouker said:
First of all thank you for your work, I got the Recovery, root, Magisk, etc. running.
I have 2 Questions:
1. the internal storage when I boot to the recovery looks like enrypted (lots of random named folders). Is it possible to decrypt it for now, since there is currently no custom kernel available?
2. Can I flash the Firmware update to 130b in TWRP? If yes, wich package do IP need to choose?
Cheers
Click to expand...
Click to collapse
Format the whole internal storage to remove encryption.

adriansticoid said:
Format the whole internal storage to remove encryption.
Click to expand...
Click to collapse
can I restore Data via TWRP without problems?

adriansticoid said:
Format the whole internal storage to remove encryption.
Click to expand...
Click to collapse
After testing, formatting the whole internal storage does not work.
To restart the partition is new encrypt

smouker said:
can I restore Data via TWRP without problems?
Click to expand...
Click to collapse
Yes it should work. Just make sure that both backup and restore destinations are either both encrypted or both decrypted.
blattes86 said:
After testing, formatting the whole internal storage does not work.
To restart the partition is new encrypt
Click to expand...
Click to collapse
What do you mean to restart the partition is new encrypt?

adriansticoid said:
Yes it should work. Just make sure that both backup and restore destinations are either both encrypted or both decrypted.
What do you mean to restart the partition is new encrypt?
Click to expand...
Click to collapse
sorry for my bad english.
After restart the phone...

[ROM] [8.0.0] [yuga] LineageOS 15.0 for Xperia Z (Unofficial)

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Disclaimer:
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you. Hard. A lot.
*/
About ROM:
This is Experiemental Build of Android 8.0 Oreo for Sony Xperia Z (C6602, C6603), Based on LineageOS.
Thanks To:
Mardon
What's working:
* ROM is experiemental and is not recommended for daily usage *
* Now we have working Audio *
I have not tested whole rom but everything works fine except:
- Flashlight and Camera
- Adaptive Brightness
Please report any bugs in the comments below!
(Special) Install Instructions for Newbies:
Warning: If you flash ROM first time do it at your own risk, You may brick device.
Before resuming remember these things:
- You can't restore TA codes on a custom ROM, TA codes only work on Stock ROMs, So if you ever reflash Stock ROM you can restore them.
- If you're Windows 8/8.1 or 10 User this Tutorial may not work for you as long as you've done This Tutorial
- Read everything Carefully, I wish you Good Luck
1.0 - Backing up TA Codes
- First you need an unlocked bootloader, But before unlocking it you have to backup DRM keys (Optional)
- Download KingoRoot, Root your device with One-Click-Root and then Download Backup-TA Program from Here
1.1 - Unlock Bootloader
- After you've done that, Unlock your bootloader from Here
1.2 - Preparing Drivers
- After you unlock your bootloader Install Sony Flashtool from Here
- Go to Flashtool Folder then go Drivers folder and select Flashtool-drivers.exe
Check the Fastboot and Flashmode drivers then Scrool down and find Xperia Z SO-02E drivers, Check it and Install them.
1.3 - Installing ADB
- Now it's time to download ADB 15 Seconds Installer from Here
Follow the instructions in the program and Install ADB/Fastboot drivers, then locate "C:/adb" folder and open it.
- Download Latest TWRP 3.1.1 from Here and move into adb folder located in "C:/adb"
- Rename TWRP 3.1.1 file to twrp (If your file extensions are shown twrp.img)
- As long as you can't flash TWRP directly as Recovery you must flash it as boot, Your ROM won't start again so back up everything before restarting to ADB!
- After you back up everything just enable USB debugging in your phone (go Settings/About and press Build Number couple times)
- Press Back button and go to Developer Settings and find USB Debugging, Enable it.
- Now go to "C:/adb" and press and hold SHIFT, Then press RMB (Right Mouse Button) and press open command window here.
- Congratulations! Now you're in adb.
1.4 - Flashing TWRP
- Write next ADB Commands:
adb devices (so you will check your device is detected by ADB or not, If adb shows any number row and then DEVICE its okay, If it doesn't then just write):
adb reboot bootloader (Look at your phone and give permissions of USB Debugging to PC, If phone reboots it means you've done everything correctly, If it doesn't then you did something wrong!)
- Well if the phone rebooted you will see blue led in the top of your phone, That means you're in a bootloader!
Write next commands:
fastboot devices (And check your device is detected by fastboot or not, same thing it will show number row and then FASTBOOT, So you did everything correctly, If it doesn't check your installed drivers, You may have little update from Device Manager so comment down below, If drivers are installed wrong and you don't see device number and FASTBOOT just restart phone and wait for the answer in the comments)
- If you see your device number and FASTBOOT enter next commands:
fastboot flash boot twrp.img
- After you've done that and you see that it has flashed without any Errors write next command:
fastboot reboot
- Now you're in TWRP recovery, Congratulations !!
1.5 - CleanFlashing ROM
- If you backed up everything just see if your computer detects your phone's MTP (media file transfer)
Go to My Computer/Xperia Z and see is there Internal Storage or not
- If There is any Storage that's good so make a Fully Clean Install
- Go back in the main menu of TWRP press Wipe, Advanced Wipe and check: Data, Cache, Dalvik Cache, System and Internal Storage, Then swipe to wipe.
- After you wiped your phone go back to the main menu of TWRP, Enter your internal storage folder from your PC and move ROM, Gapps and Rootkit in there.
- After that Press Install, You'll see lineageos, gapps and rootkit in the TWRP so press lineageos file and swipe to flash.
- Then go back (Don't Reboot) and press gapps file, flash it as you flashed lineageos.
- Go back again and flash Rootkit but when it's finished just press wipe dalvik cache and swipe to wipe it!
- After you've done that press Reboot phone.
- Congratulations!! Wait for 10 minute to boot and enjoy your new Android 8.0.0 Oreo!
1.0-2 - Troubleshooting
- If you want to install any other Custom ROMs just resume this tutorial from ADB (adb reboot bootloader) And do the same.
- If ROM doesn't boot up that means you did something incorrectly, So you have to do next steps:
Long Press Power Button and Volume UP, After it vibrates it will vibrate three more times and then release so your phone will shut down.
Get your USB Cable which's connected to PC and hold Volume UP, then connect USB Cable into phone
- You're in a fastboot, resume tutorial from (fastboot flash boot twrp.img)
- If you flashed ROM again and still doesn't work change your gapps version and download gApps-Pico
- Then it will work 100%, Or you can flash LineageOS14.1 and wait for Stable Oreo build.
- Thank you for attention, do it at your own risk and good luck
Downloads:
MOD EDIT: Download link removed.
Download the gApps (ARM, 8.0, Pico)
Download Rootkit if you want (I've tested Magisk and works fine)
- Links updated & No more error7 in TWRP
Short Install Instructions:
Move the ROM/GAPPS/ROOTKIT on your SDCARD
Flash latest TWRP (If you have old version already reflash it using flash image)
Wipe Cache, Data, Dalvik cache and System
Flash ROM
Flash gApps
Flash Rootkit
Wipe dalvik cache
Reboot!
- First boot may take some time for optimizing apps, bootanimation may have a little lag, be patient and wait.
ROM Information:
ROM Version: 8.x Oreo
ROM Kernel: Linux 3.10.x
Based On: LineageOS
Version Information:
Status: Experiemental
If you like the ROM please hit that Thanks button and give some support

Again hard work on design of topic, i hope you enjoy highlights and green (LOS color) design
So hit that THANKS button <3

#iLiKo said:
Again hard work on design of topic, i hope you enjoy highlights and green (LOS color) design
So hit that THANKS button <3
Click to expand...
Click to collapse
omg I can't believe this @@
thank you so much for your awesome work ^^

with 3.0.2- version of TWRP gave me error 7 and not install me the ROM so it is possible with 3.1.1 version ?

404 not found
Can't find it!
If you are seeing this error page then the file in question has been deleted from the site and servers. Please contact the developer/uploader for a new link to the file.

cyparisss1 said:
with 3.0.2- version of TWRP gave me error 7 and not install me the ROM so it is possible with 3.1.1 version ?
Click to expand...
Click to collapse
Not TWRP problem at all, don't delete rom because mby link got broken, ill help you to fix tommorow, update-script must be changed

Mardon deleted both international testbuilds of lineage15yuga from his account, idk why.
Link of old version:
MOD EDIT: Removed download link

not happen
with version 3.1.1
installing zip file /sdcard/Android 8/lineage-15.*****
checking for digest file....
skipping digest check : no Digest file found
Warning: no file_contexts
E3004: This package is for device: C6602, C6603, C6606, yuga;this device is .
Updater process ended with ERROR: 7
Error installing zip file lineage-15*******
Updating partition details...
....done
my device is 6603 I am sure in that - how to check and set it, may be from the custom roms this information is lost in the phone ?

cyparisss1 said:
with version 3.1.1
installing zip file /sdcard/Android 8/lineage-15.*****
checking for digest file....
skipping digest check : no Digest file found
Warning: no file_contexts
E3004: This package is for device: C6602, C6603, C6606, yuga;this device is .
Updater process ended with ERROR: 7
Error installing zip file lineage-15*******
Updating partition details...
....done
my device is 6603 I am sure in that - how to check and set it, may be from the custom roms this information is lost in the phone ?
Click to expand...
Click to collapse
dude its bugged at update-script so tommorow when i get PC please upload that new ROM somewhere, ill fix it and you and other people can download back, i fixed the link, but its old version without audio..

#iLiKo said:
Mardon deleted both international testbuilds of lineage15yuga from his account, idk why.
Click to expand...
Click to collapse
I can tell you why. Because you posted it without even asking. This happened a month ago too. Please stop that. It is annoying and delays LOS15 for fusion3 because people have to deal with this sh**.

I am using custom rom and my device model is Xperia Z , it is possible to not verify my phone like c6603 and then the installation fails. See on the screen shots

#iLiKo said:
dude its bugged at update-script so tommorow when i get PC please upload that new ROM somewhere, ill fix it and you and other people can download back, i fixed the link, but its old version without audio..
Click to expand...
Click to collapse
welcome my friend, MOD EDIT: Removed download link

NamenIos said:
I can tell you why. Because you posted it without even asking. This happened a month ago too. Please stop that. It is annoying and delays LOS15 for fusion3 because people have to deal with this sh**.
Click to expand...
Click to collapse
ill explain u smth this rom is shared and doesnt require any rights to post on websites, also people must have single oreo rom for this phone to try how its like, plus i made whole tutorial of newbies now i think they wont get in problems, also everyone knowns that this is experimental testbuild, but LOSTEAM still want to share only stable.. i think differently, i think people can see how oreo really is, whats the differences and etc.. by themselves. stop it, im not gonna delete rom again.

cyparisss1 said:
welcome my friend, MOD EDIT: Removed download link
Click to expand...
Click to collapse
new link: MOD EDIT: Removed download link

Bug
Camera not working
Lag ui (recent app)
Error 7 script delete assert line

mohammadnadimi48 said:
Camera not working
Lag ui (recent app)
Error 7 script delete assert line
Click to expand...
Click to collapse
Error 7 has been fixed i think so.
Use new link

Thread closed.
#iLiKo said:
ill explain u smth this rom is shared
Click to expand...
Click to collapse
Yes, you are right here - LineageOS can be built from source.
#iLiKo said:
doesnt require any rights to post on websites
Click to expand...
Click to collapse
Not quite correct - you still need to stick to the XDA rules (see rule 12).
You need to accept the fact that the developers of the ROM don't want to release half-baked builds or unfinished work (even if it's open source). Don't we all want a stable daily driver after all?
Thread closed.

[Q&A][ROM][8.1] LineageOS 15.1 for Xperia SP

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
​
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
About this Q&A thread for LineageOS
Use this area to ask anything you want related to LineageOS,
but try not to spam everyone, always search for an answer before.​
General Questions & Answers
Is root access included into LineageOS ?
No longer included by default to improve user security.
An addon is shared to add SuperUser features : https://download.lineageos.org/extras.
It will survive to updates the same way GApps do.
Go into Settings, About Phone. Tap "Build number" 7 times.
Go back, open Developer options. Change "Root access" option.
Do not use SuperSU unless you are sure, creates booting issues.
Read more about it : Here.​
Is the ROM suited for daily usage ?
Yes but work in progress.​
Can I flash LineageOS on official and development builds, or even on CM without wipes ?
Migrations from unofficial to official, and from CM builds, are not possible.
Always remember to do backups before doing such changes.​
Is the device encryption supported ?
State unknown. If you're coming from an older ROM
please read the details here : a07afb9660a86f702066003b8e81ab63789d1660​
When USB connected to a computer, I can't access the storage ?
The phone is in charge-only mode by default on Nougat,
due to a stronger security logic regarding unauthorised data access.
Swipe down the notifications and change the USB mode.​
I can't access the ROM's recovery with Volume-
You can either flash the boot.img from the newer Releases with "fastboot flash boot boot.img" or FlashTool,
or follow the instructions of the TWRP Recovery installation to update from TWRP.​
Against advice, I upgraded without GApps and now it crashes. Any way without factory reset ?
Yes there is, but nothing assures you'll manage to do it fully & preserve all your data...
Once booted, keep saying Ok to all "Unfortunately, ... has stopped",
pull-down the notifications panel, press the Settings icon,
go in Apps, menu, Show System, scroll to Setup Wizard (green Android logo),
Permissions, and activate Contacts + Telephone.
Later, some Play Store apps may need reinstalling.
If not working, then I advise a clean factory-reset reinstallation...​

Is f2fs recommended for Data and Cache partition?
Would it have any performance impact?

Is Lineage 15.1 bringing Android Go to Xperia SP ? Or is it the "normal" Android ?

polo_joe said:
Is f2fs recommended for Data and Cache partition?
Would it have any performance impact?
Click to expand...
Click to collapse
It may have some small improvment but nothing significant.
---------- Post added at 06:45 PM ---------- Previous post was at 06:44 PM ----------
Styxyn said:
Is Lineage 15.1 bringing Android Go to Xperia SP ? Or is it the "normal" Android ?
Click to expand...
Click to collapse
It is Android with GO configuration. But there is low-ram patcher that adrian made to make ROM low-ram or disable low-ram(disable GO configuration).

I can't see my files of my micro SD card , any idea ? ?
Screenshots of the problem:
*EDIT* -- SOLUTION--
My micro sd-card was in exFAT file system. I backup the files on my computer. Put the card in my SP and format it under storage tab on Lineage settings. When it's done, the system ask you how you want to use the micro-sd card; I choose external storage option. Open the file manager "File", and you can see the files on the micro sd-card.
I put my micro sd-card on my computer and I noticed the card was formatted in FAT32. So, "File" manager can't show you the files on your micro sd when the filesystem is in exFAT.

installation error
hey
cant install lineage 15 on my c5303. showing ths error

magc880826 said:
hey
cant install lineage 15 on my c5303. showing ths error
Click to expand...
Click to collapse
Update recovery to the latest TWRP recovery from here (flash FOTA version):
https://forum.xda-developers.com/showthread.php?t=3309938
then flash the Lineage OS 15 ROM
Sent from my Xperia SP using Tapatalk

OsGhaly said:
Update recovery to the latest TWRP recovery from here (flash FOTA version):
https://forum.xda-developers.com/showthread.php?t=3309938
then flash the Lineage OS 15 ROM
that worked. thanks
Click to expand...
Click to collapse

software counterfeiting
why is this software counterfeiting notification always coming

magc880826 said:
why is this software counterfeiting notification always coming
Click to expand...
Click to collapse
It's an April Fools' Day joke...
https://www.androidpolice.com/2018/...geos-bad-late-april-fools-joke-latest-builds/
You can wait until the next build, when they will remove it, or you can disable it any time by running this command from a root shell (such as adb root / recovery or terminal app), and reboot the device after:
Code:
setprop persist.lineage.nofool true

Magisk
can you root with magisk 16.0 this rom?

frerere said:
can you root with magisk 16.0 this rom?
Click to expand...
Click to collapse
Yes you can. But you will need to use boot bridge by Adrian to flash it since Magisk doesnt have Sony ELF image support.

Hi does it supports persian language?

the camcorder does not work for me
when I put it in video mode and I record at 720px when I stop it, I just pause it and it does not record the video; what am I doing wrong???
here a screenshots:
using the google translator.

¿Theming support?
¿Is this new release compatible with Substratum OMS, Legacy or something?

ValenShadeSP said:
¿Is this new release compatible with Substratum OMS, Legacy or something?
Click to expand...
Click to collapse
For Oreo ROM with theme manager try this
https://forum.xda-developers.com/xperia-sp/development/rom-aospextended-rom-v4-3-t3627470
Or
https://forum.xda-developers.com/xperia-sp/development/rom-cosmic-os-v3-1-universe-t3742849
Sent from my Xperia SP using Tapatalk

It's the best rom but Some times incoming calls can not hear my voice,
Any idea?

meysam1712 said:
It's the best rom but Some times incoming calls can not hear my voice,
Any idea?
Click to expand...
Click to collapse
Mute and unmute fixes mine

Does this rom support ntfs file format for SD cards? On Lineage 14.1 my ntfs sd card works ok, but on Lineage 15.1 it says "can't load content at the moment" when opening the sd card from file manager.

@AdrianDC
Is there a chance we get HCE host card emulation support in lineageOS 15.1 builds? I want to use it for a nfc payment app.

[ROM][12.1][tissot][OFFICIAL] crDroid v8.4 [10.04.2022]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
*** Disclaimer
I am not responsible for any damage you made to your device
You have been warned
crDroid is designed to increase performance and reliability over stock Android for your device also attempting to bringing many of the best features existent today
Features:
https://github.com/crdroidandroid/crdroid_features/blob/12.0/README.mkdn
Flashing Instructions:
Pre-installation:
TWRP (Download from here)
gapps (Download from here)
Magisk 20.0 or newer for root (after first boot) - (Download from here)
First time installation:
Download twrpboot.img & twrp.zip in your pc (link above) and extract zip file
Hotboot twrp from your pc with command fastboot boot boot-recovery.img
Wipe system, wipe data, wipe dalvik cache
Copy downloaded rom from pc to your phone and start the installation
After installing flash twrp.zip and reboot to recovery again
Install gapps & magisk (optional) and then reboot your phone
Profit! (Enjoy your rom)
Update installation:
You can choose to update via seamless ota or use recovery mode method
For recovery update method:
Reboot to recovery from phone
Flash Rom.zip & Twrp.zip and reboot to recovery
Flash Gapps
Flash Magisk (optional) & reboot your phone
Profit! (Enjoy your rom)
Sources:
ROM: https://github.com/crdroidandroid
Kernel: CLICK HERE
Download:
ROM CLICK HERE
Changelog: https://raw.githubusercontent.com/crdroidandroid/android_vendor_crDroidOTA/12.0/changelog_tissot.txt
Known issues:
You tell me!
Visit official website @ crDroid.net
crDroid Tissot Telegram
crDroid Community Telegram
crDroid Updates Channel
Donate to help our team pay server costs

You should try this awesome rom

That's a very nice rom, I switched from crdroid7. No crushes or freezes, only bug i found is that after a reboot lockscreen needs a few seconds to start responding. Gestures navigation is very smooth and really pleasant to use, in crdroid7 it was a bit worse. Lacks many customisation features known from previous version. Magisk works without a problem. I did not install gapps.
Good job, thanks for that

One sidenote, I don't know if it is only the case for me but after I clean flashed this rom, and flashed official twrp 3.5.2 installer afterwords, it just won't boot. What's worse, it will stuck twrp on splash screen and booting other twrp via fastboot does not help - always same issue. I tried with 3.6.0 but same problem. Maybe it's only for me?

Exmantion said:
One sidenote, I don't know if it is only the case for me but after I clean flashed this rom, and flashed official twrp 3.5.2 installer afterwords, it just won't boot. What's worse, it will stuck twrp on splash screen and booting other twrp via fastboot does not help - always same issue. I tried with 3.6.0 but same problem. Maybe it's only for me?
Click to expand...
Click to collapse
Will be fixed...

How can I flash the gapps? I am a crDroid new user

New Update is Up!
2nd February 2022
Changelog : HERE
Download : HERE
Telegram Group : HERE
OTA Pushed for Existing Users!

Thanks for the update.
OTA didn't work for me, bootloop.
Maybe something with my setup
So here is what I did.
I had to flash manually:
Got to recovery (power+vol up)
In recovery (crDroid) I flash TWRP installer
rebooted to TWRP
Flashed the zip downloaded by OTA updater (from /data).
Rebooted to recovery (crDroid recovery)
Flashed Gapps and Magisk.

It's an amazing rom, however I noticed the icons are slightly stretched vertically, since it seems to be a wider margin in the side edges of the screen. Is there any way to fix that?

Sr. Lumia said:
How can I flash the gapps? I am a crDroid new user
Click to expand...
Click to collapse
You install the ROM, reboot to recovery and then install the Gapps zip-file.

This is just an Android 12 Beta-build. When will there be an official stable build?

Seems like GPS location doesn't work. It's not connecting to SATs :-(
Maybe at next release.

zagzag99 said:
Seems like GPS location doesn't work. It's not connecting to SATs :-(
Maybe at next release.
Click to expand...
Click to collapse
Hey...jst 1 2 share my experience about the gps. I was trying to improve the gps by trying to edit the gps.conf file (read some advice on this forum), so i was editing a few line of code here and there hoping to improve the gps, it doesn't seems to work well, so i start wondering if this gps.conf file even relevant ? So i try NOT TO use it by renaming the file to .old and test it with an app from play store (GPS Reset Com - GPS Repair), installed the app, did a GPS fix from the app, went outside of my house to test ...and surprise surprise..it lock on to about 8 to 10 GPS, and now i am using Google Maps for navigation without any problem. Normally it got a fix within 20/25 sec, i hope this can help you in some ways ...

Jason Looi said:
Hey...jst 1 2 share my experience about the gps. I was trying to improve the gps by trying to edit the gps.conf file (read some advice on this forum), so i was editing a few line of code here and there hoping to improve the gps, it doesn't seems to work well, so i start wondering if this gps.conf file even relevant ? So i try NOT TO use it by renaming the file to .old and test it with an app from play store (GPS Reset Com - GPS Repair), installed the app, did a GPS fix from the app, went outside of my house to test ...and surprise surprise..it lock on to about 8 to 10 GPS, and now i am using Google Maps for navigation without any problem. Normally it got a fix within 20/25 sec, i hope this can help you in some ways ...
Click to expand...
Click to collapse
Thanks for the reply.
So you used a root explorer to just rename the gps.conf file at what path ?
And can you link the playstore app that you used to repair the config ?
Did it use root ? And produced a new file next to the renamed one ?

zagzag99 said:
Thanks for the reply.
So you used a root explorer to just rename the gps.conf file at what path ?
Click to expand...
Click to collapse
I use solid explorer, Root/vendor/etc or just do a search in root directory.
zagzag99 said:
And can you link the playstore app that you used to repair the config ?
Click to expand...
Click to collapse
GPS Reset COM - GPS Repair - Apps on Google Play
GPS tools & navigation system. Get a faster GPS fix, repair GPS problems.
play.google.com
zagzag99 said:
Did it use root ? And produced a new file next to the renamed one ?
Click to expand...
Click to collapse
Yes, my device is rooted and No, i didn't create another file, just rename the gps.conf to gps.conf.old

New Update is Up!
crDroidAndroid-12.1-20220410-tissot-v8.4.zip
Download
Changelogs
Recommended Gapps for 12L
Donate me here

Thanks. Nice to see MI A1 is still alive. Still a nice phone. Will try this rom.

upload speed indicator always show 0