Database Develop

CM Recovery for Nexus Player (fugu)

This is the CM-12.1 recovery for fugu.
Use the bottom button to navigate. One push to scroll down and long press to select. I've tested both adb side load and install from internal storage. This recovery also supports adb backup, but I haven't tested it yet.
I hope you enjoy not having to fastboot everything.
Download: fugu_cm_recovery-20150418.img
To install just boot bootloader and
Code:
fastboot flash recovery fugu_cm_recovery.img

Dude, quit being so amazing. It's getting ridiculous.

Excellent! This is the first custom recovery available for this device, correct? I suppose this would open the door to something like the Xposed Framework being installed on the Nexus Player but since my device is running on Android 5.1, I'll probably wait until rovo89 officially adds support for the latest version of Android first.

Yes!!! Glad to see you!

@WugFresh

@dhacker29 Sweet! Thank you! May I suggest you don't use dev host to host this file . They use to be good a while back, but now often employ sketchy MITM type "download manager" scams, and other bad practices. From the original dev thread http://forum.xda-developers.com/showthread.php?p=54363645 -
Dear Developers,
It has come to our attention that due to excessive ads that simulate download buttons, fly-by malware APK attacks from Mobogenie, and reused (and potentially dangerous) reused short URLs, Dev-Host no longer meets our minimum acceptable requirements as a hosting affiliate. As such, we are ending our affiliation with this provider. We urge you to find a safer download host for your development projects such as our other affiliates: Goo.im and AndroidFileHost.
Click to expand...
Click to collapse
Just a heads up. I had a bad experience with them before I saw that post.
Also, it would be awesome if you had a naming convention with version number for all future releases (assuming you plan on updating it); like "cm_recovery_fugu_1.0.0.img" or something.
Thanks again! I know lots of people have been patiently waiting and hoping for a fugu recovery. [emoji106] [emoji106] [emoji106]

GabbyWC said:
Excellent! This is the first custom recovery available for this device, correct? I suppose this would open the door to something like the Xposed Framework being installed on the Nexus Player but since my device is running on Android 5.1, I'll probably wait until rovo89 officially adds support for the latest version of Android first.
Click to expand...
Click to collapse
Yes this is the first recovery for the device but last I checked Xsposed had nothing to do with recovery. This will allow for custom firmware like cm-12.1 to be flashed to the device without having to use fastboot.
---------- Post added at 03:27 AM ---------- Previous post was at 03:17 AM ----------
WugFresh said:
@dhacker29 Sweet! Thank you! May I suggest you don't use dev host to host this file . They use to be good a while back, but now often employ sketchy MITM type "download manager" scams, and other bad practices. From the original dev thread http://forum.xda-developers.com/showthread.php?p=54363645 -
Just a heads up. I had a bad experience with them before I saw that post.
Also, it would be awesome if you had a naming convention with version number for all future releases (assuming you plan on updating it); like "cm_recovery_fugu_1.0.0.img" or something.
Thanks again! I know lots of people have been patiently waiting and hoping for a fugu recovery. [emoji106] [emoji106] [emoji106]
Click to expand...
Click to collapse
I have to agree with Wugfresh on this bro AndroidFileHost is great. All you need to do is @ the guy on Twitter and he'll hook you up with a developer account complete with ftp access.
Wugfresh the issue with a revision on this is it's cm's android bootable recovery so technically anytime a commit is made to that repo it would be a revision change.

I'll host the updated image somewhere else tonight and I will be adding the date to the end of the image so you can tell if it is updated.

bkjolly said:
Yes this is the first recovery for the device but last I checked Xsposed had nothing to do with recovery. This will allow for custom firmware like cm-12.1 to be flashed to the device without having to use fastboot.
Click to expand...
Click to collapse
The Q&A for Xposed on Android 5.0 at http://www.xda-developers.com/xposed-framework-for-android-lollipop-is-here/ contains this quote:
I want to install it. Now! What do I have to do?
Make sure that you’ve read my words above and you’re familiar with your phone’s internals. Obviously, you need to be on a Lollipop ROM and have a good backup of your data. For now, I will only publish the ARMv7 version. 64-bit is more complex, so let’s try the “easy” variant first.
For now, the installation has to be performed manually in a custom recovery. Flashing the zip file will install:
* app_process32_xposed and some symlinks
* libexposed_art.so
* libart.so and some related binaries + libraries (based on 5.0.2, enhanced with support for hooking etc.)
* XposedBridge.jar (now stored in /system/framework)
Backups of existing files will be created automatically and could be restored later.

Can confirm a working flash. Everything looks great! Thanks for all the hard work

no option to make a recovery image...whats the point of this then?
I tried to wipe my cache to free some space and it sent my nexus player into a bootloop...whats going on with this?

How exactly does this work? If my device is rooted on 5.1.0 and I flash this custom recovery. Can I make a backup of everything on the device? Then when google goes to update the android version, can I update it, then restore my backup of everything and not lose root? I'm sorry i'm new to custom recovery and not quite sure how they work. Thank you for your help!

Edit

Noob
I'm a bit of a noob - I have managed to ADB a new boot and system image to my nexus player - it's now running lollipop1.6. What does this recovery mean and how is it different than loading a boot and system image? Thanks - Does this require ClockworkMod?
dhacker29 said:
I just got my Nexus Player last night and made a working version of CM recovery for it. Use the bottom button to navigate. One push to scroll down and long press to select. I've tested both adb side load and install from internal storage. This recovery also supports adb backup, but I haven't tested it yet.
I hope you enjoy not having to fastboot everything.
Download: fugu_cm_recovery.img - 8.41 MB
To install just boot bootloader and
Code:
fastboot flash recovery fugu_cm_recovery.img
Click to expand...
Click to collapse

OathYvne said:
How exactly does this work? If my device is rooted on 5.1.0 and I flash this custom recovery. Can I make a backup of everything on the device? Then when google goes to update the android version, can I update it, then restore my backup of everything and not lose root? I'm sorry i'm new to custom recovery and not quite sure how they work. Thank you for your help!
Click to expand...
Click to collapse
if you restored your backup you would be downgrading it from the update you just took. you dont need a custom recovery to back up apps and their data, there are apps for that. a custom recovery makes it so its easier to flash new/custom roms(os), make backups of the current rom(os) so if anything goes wrong you can restore it, flash zips like the supersu zip or xposed framework. if you try take an ota with a custom recovery the ota will fail to install as its looking for the stock recovery(may be diff on a nexus device but its always been like that on the devices i have owned)

OathYvne said:
How exactly does this work? If my device is rooted on 5.1.0 and I flash this custom recovery. Can I make a backup of everything on the device? Then when google goes to update the android version, can I update it, then restore my backup of everything and not lose root? I'm sorry i'm new to custom recovery and not quite sure how they work. Thank you for your help!
Click to expand...
Click to collapse
This recovery does not provide a "nandroid" type backup where all of your info is zipped up and stored on the devices internal storage, where any application can get access to it, but rather supports adb backup. which backs up your information to a file on your computer. See http://forum.xda-developers.com/galaxy-nexus/general/guide-phone-backup-unlock-root-t1420351 for more information on usage.

WugFresh said:
@dhacker29 Sweet! Thank you! May I suggest you don't use dev host to host this file . They use to be good a while back, but now often employ sketchy MITM type "download manager" scams, and other bad practices. From the original dev thread http://forum.xda-developers.com/showthread.php?p=54363645 -
Just a heads up. I had a bad experience with them before I saw that post.
Also, it would be awesome if you had a naming convention with version number for all future releases (assuming you plan on updating it); like "cm_recovery_fugu_1.0.0.img" or something.
Thanks again! I know lots of people have been patiently waiting and hoping for a fugu recovery. [emoji106] [emoji106] [emoji106]
Click to expand...
Click to collapse
I swtiched to andriodfilehost and uploaded the latest version.

dhacker29 said:
I swtiched to andriodfilehost and uploaded the latest version.
Click to expand...
Click to collapse
Thanks for an update. I tried to full backup by following commands.
adb backup -apk -shared -all -f C:\backup20151904.ab
But getting this "Now unlock your device and confirm the backup operation" lines and asking for unlock your deivice to confirm. Any sugestion to pass this. Thanks

Yes it seems Google decided to remove the backup confirmation dialog from TcSettings

So it means adb backup of a full ROM is not possible? Going to try your rom later.
Sent from my Nexus 6 using Tapatalk 2

[ROM][TW][RB1][KitKat][4.4.4] FyrestoneROM [SM-T113][27 July 2018]

FyrestoneROM T113​The simplicity of TouchWiz system without superfluous​
Code:
* Your warranty is now void.
*
* We're not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
Introduction:
This Rom is the stock samsung without annoying apps and with some tweaks made to make your life easier.
I have a lot to do for make it better, but I hope you appreciate my work, if you don't thanks for giving me a chance.​
Features:
Based on T113XXU0ARB1
Debolated - Samsung and Google apps (350 MB of useless apps)
Deodexed
Zipaligned
Faster animation scale
Knox Free
Removed boot sound
Rooted with SuperSu
Busybox
Sony System signature - Feel free to install sony apps from play store!
AOSP Keyboard
Removed Samsung Update
Allow apps access to external storage
Removed Loud volume warning
Cyanogen/LineageOS UI sounds
Tweaks:
Battery Tweaks
Better scrolling
Video acceleration and HW debugging
Better RAM management
Google DNS
Download Link:
DOWNLOAD​MD5: b7694314c6cfe88f013522b86319210d
Old version [4 Feb 2017]: DOWNLOAD
MD5: 283aa300c00ae227b4362945925db4b4
Old version [4 Jan 2017]: DOWNLOAD
MD5: 6f97e788b0b2571742b256e6fcaf1e86
How to install The Rom:
Update your bootloader and baseband to XXU0ARB1 before flash!
1. Flash TWRP 2.8.7.0.tar with Odin 3.12.10.
2. Flash TWRP 3.0.2-0.img inside the recovery (Select Install image and choose Recovery partition).
3. Reboot into TWRP 3.0.2-0.
4. Copy FyrestoneROM_T113_XXXXX.zip in your SD Card.
5. Wipe: System, Data, Cache and Dalvik.
6. Optional – Wipe Internal Storage.
7. Install FyrestoneROM_T113_XXXXX.
8. Reboot and wait about 10 minutes.
How to install The Firmware:
1. Download and extract a zip file containing your desired firmware.
2. Open Odin Tool.
3. Boot your device in the "Download Mode":
(Press Volume Down, Power and Home buttons at same time for 5-8 seconds until download mode is active.)
4. Connect your device to PC via the USB cable while in download mode.
5. Next, check the "Auto Reboot" and "F. Reset Time" options in Odin Tool.
6. Hit the AP/PDA button then browse and select a tar.md5 file from the extracted folder.
7. Finally press the start button to begin flashing the firmware update on your device.
Credits:
Google for Android OS
Samsung for FW and source
Sony for System signature
Cyanogenmod for File manager
@SuperR for the kitchen
@bravonova for Build.prop Tweaks
@Chainfire for SuperSu
@mrRobinson for AdAway
XDA:DevDB Information
FyrestoneROM, ROM for the Samsung Galaxy Tab 3
Contributors
Jimbus369
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.10.x
ROM Firmware Required: T113XXU0AQA1
Based On: STOCK Samsung
Version Information
Status: Stable
Current Stable Version: 2.0
Stable Release Date: 2017-02-04
Created 2017-01-04
Last Updated 2018-08-18

Reserved
Changelog:
27 July 2018:
Updated to XXU0ARB1
Fixed all previous issues
Removed Cyanogen File manager and Adawey
Now Thunderoar Kernel v5.0 is fully compatible
Updated Busybox and SuperSu
4 Feb 2017:
Updated to XXU0AQA1
Removed some Bloatware
Deodexed
Zipaligned
Faster animation scale
Allow apps access to external storage
Loud volume warning removed
Cyanogen/LineageOS UI sounds
Battery Tweaks
Increase Quality Of Media Streaming
Fixed Google DNS
Fixed Calendar Sync
Various build.prop changes
Various fix
4 Jan 2017:
Initial release
Known issues:
Calendar doesn't synchronize --> Calendar_sync_fix.zip
Tablet doesn't support vpn functionality --> VPN_FIX.zip
Print spooler does not works --> PrintSpooler_FIX.zip

Fantastic! Finally we've got a rom of our very own, for which you've got my immense thanks. I'm very much looking forward to trying it out.
Unfortunately when I flashed it there was a loooong wait on the Samsung logo, and then... Well, after an hour I booted back to recovery to start over.
I honestly don't think your rom was the problem though, because from some point last night everything I tried - custom rom flashing and nandroid backup restores - wound up the same way. Odin + stock + root got a usable system at least, and today's been too busy to try again. But when I do I'll post back about how it goes.
(Sadly, I can't go back in time to see what order I did things and look for a pattern if this happens again. In case it might be useful to anyone, I know for sure I'd gotten stock set up comfortably and made a complete backup before giving thunderoar's T113 kernel a whirl, and that went swimmingly. Even had mounts2sd properly recognizing external sd set up after a long struggle, though not actually enabled yet. Don't know what else i did between making that backup and trying to flash this, but it's likely I just screwed something up somehow.)

PushyPhoenix said:
Fantastic! Finally we've got a rom of our very own, for which you've got my immense thanks. I'm very much looking forward to trying it out.
Unfortunately when I flashed it there was a loooong wait on the Samsung logo, and then... Well, after an hour I booted back to recovery to start over.
I honestly don't think your rom was the problem though, because from some point last night everything I tried - custom rom flashing and nandroid backup restores - wound up the same way. Odin + stock + root got a usable system at least, and today's been too busy to try again. But when I do I'll post back about how it goes.
(Sadly, I can't go back in time to see what order I did things and look for a pattern if this happens again. In case it might be useful to anyone, I know for sure I'd gotten stock set up comfortably and made a complete backup before giving thunderoar's T113 kernel a whirl, and that went swimmingly. Even had mounts2sd properly recognizing external sd set up after a long struggle, though not actually enabled yet. Don't know what else i did between making that backup and trying to flash this, but it's likely I just screwed something up somehow.)
Click to expand...
Click to collapse
Upgrade your firmware to PH5 before flash and use TWRP 3.0.2-0.
Firmware: http://samsung-updates.com/device/?id=SM-T113
TWRP: https://dl.twrp.me/goyave/
Wipe all partition in TWRP:
System, Cache, Dalvik and if you can internal Storage.
Thunderoar Kernel isn't compatible with PH5 firmware for the moment.
Let me know how it goes

Thanks so much for responding even though I didn't specifically ask.
Pretty much all my knowledge comes from following instructions in these forums and piecing little bits of information together, so I've got a few questions - trying to understand the "why" behind these things in order to be more self-sufficient. Please feel free to point me towards resources where I can learn more!
Jimbus369 said:
Upgrade your firmware to PH5 before flash and use TWRP 3.0.2-0.
Click to expand...
Click to collapse
This is a surprise to me - I'd always thought that when flashing a new ROM, everything gets replaced. I never would have figured this part out on my own!
Firmware: http://samsung-updates.com/device/?id=SM-T113
Click to expand...
Click to collapse
There's no Canadian version - but should I presume that, since this is a Wi-Fi only device, the CSC isn't too important?
How much does this matter even when using a device with a network connection?
TWRP: https://dl.twrp.me/goyave/
Click to expand...
Click to collapse
(Ooops, forgot to do this right off the bat. My bad!)
Does recovery version generally make a big difference?
Wipe all partition in TWRP:
System, Cache, Dalvik and if you can internal Storage.
Click to expand...
Click to collapse
I've been wiping Data as well - is that not necessary?
Does wiping Internal Storage have a big effect? I suppose there's a fair bit of app-specific stuff in there that could cause issues?
Thunderoar Kernel isn't compatible with PH5 firmware for the moment.
Click to expand...
Click to collapse
Ah well, soon enough!
Let me know how it goes
Click to expand...
Click to collapse
Of course! You're investing time in putting this together, and helping out users; the very least I can do is let you know what's going on with that time you've invested!
Okay, about to check on the firmware installation!

PushyPhoenix said:
This is a surprise to me - I'd always thought that when flashing a new ROM, everything gets replaced. I never would have figured this part out on my own!
Click to expand...
Click to collapse
When you install a rom, especially a TW one, in most case you need a specific Bootloader to cause it to start and work smoothly.
Wikipedia:
A boot loader is a computer program that loads an operating system or some other system software for the computer after completion of the power-on self-tests; it is the loader for the operating system itself. Within the hard reboot process, it runs after completion of the self-tests, then loads and runs the software. A boot loader is loaded into main memory from persistent memory, such as a hard disk drive or, in some older computers, from a medium such as punched cards, punched tape, or magnetic tape. The boot loader then loads and executes the processes that finalize the boot. Like POST processes, the boot loader code comes from a "hard-wired" and persistent location; if that location is too limited for some reason, that primary boot loader calls a second-stage boot loader or a secondary program loader.
The bootloader runs your rom with specific instructions, if the rom does not support an older bootloader simply does not boot. My rom does not support the older bootloader. A zip flash in this case cannot upgrade a delicate part like the bootloader. You need to flash the newer one with Odin.
There's no Canadian version - but should I presume that, since this is a Wi-Fi only device, the CSC isn't too important?
How much does this matter even when using a device with a network connection?
Click to expand...
Click to collapse
The latest update for your country is PA5. Try with THIS.
Your country code is XAC.
The CSC (Sale Country Code) Is that part of the firmware that contains all the telephone operator customizations (e.g. WAP, MMS) for the intended country. As far as i know, It is not important for us.
(Ooops, forgot to do this right off the bat. My bad!)
Does recovery version generally make a big difference?
Click to expand...
Click to collapse
Yes, the Recovery can make the difference.
I've been wiping Data as well - is that not necessary?
Does wiping Internal Storage have a big effect? I suppose there's a fair bit of app-specific stuff in there that could cause issues?
Click to expand...
Click to collapse
I forgot to write data, my bad! But i wrote it in the instructions in the first topic. For personal experience i had different issues when I didn't formatted the Internal Storage. The Android folder, .thumbnails and others, can create issues.
Ah well, soon enough!
Click to expand...
Click to collapse
I hope that in the next update we could use this kernel. :fingers-crossed:
Of course! You're investing time in putting this together, and helping out users; the very least I can do is let you know what's going on with that time you've invested!
Okay, about to check on the firmware installation!
Click to expand...
Click to collapse
I want to give my best support at all users in difficulty, if you have a problem just ask. :good: :good:
Sorry for my english

Jimbus369 said:
Sorry for my english
Click to expand...
Click to collapse
You're doing just fine!
I'll reply more later, but wanted to report that it's installed and running very smoothly! Haven't played around much but will do at home later.
If you've got any tips for getting mounts2sd up and running I'd really appreciate it!

PushyPhoenix said:
You're doing just fine!
I'll reply more later, but wanted to report that it's installed and running very smoothly! Haven't played around much but will do at home later.
If you've got any tips for getting mounts2sd up and running I'd really appreciate it!
Click to expand...
Click to collapse
I'm happy to hear it. Anyway, I don't know how mounts2sd works. Have you already tried HERE?

Jimbus369 said:
I'm happy to hear it. Anyway, I don't know how mounts2sd works. Have you already tried HERE?
Click to expand...
Click to collapse
Yup, that's the app I'm using, but haven't been able to get my external partition mounted properly. I did manage it once, think it was with thunderoar's kernel though.
Sent from my SM-G900W8 using XDA Labs

Jimbus369 said:
I'm happy to hear it.
Click to expand...
Click to collapse
Life has gotten in the way of playing around with this, but thought I'd send you an update as I said I would...
Your rom is running really nicely on my tablet as I use it daily. It's smooth and small, with no unexpected reboots or fc's on installed apps. Didn't wipe internal SD but it hasn't given me any issues with existing data (probably because there wasn't much to start with).
One thing that has caused a problem is calendar sync. It looks like you've taken out the actual syncing service, so when I try to access my calendars through any app I'm asked to add a new Google account, even though everything's already set up in "Accounts" under Settings. I haven't tried running the "calendars.providers.apk" from my other phone, that should fix the problem - but I don't want to use the wrong version and break something!
Also, I've confirmed that the only time I got mounts2sd working, it was with thunderoar's kernel. So guess that's going to have to wait.
A few adjustments I made to the setup were to uninstall all "unnecessary" system apps (not needed to run the device), and re-install them from the store. This way I've got 676mb free on /system and still over 1.5GB free on internal storage.
I've also added a multi-reboot menu to make getting into recovery or download mode simpler, and this is loading more quickly on your rom than stock. I've also had to modify permissions.xml to allow apps to access external storage by default, and made another tweak to disable the "loud volume warning" (don't remember quite what it was offhand).
Would you consider adding these to a future version?
Again, thanks SO much for putting this together, answering questions, and doing your thing. It's greatly appreciated!

PushyPhoenix said:
Life has gotten in the way of playing around with this, but thought I'd send you an update as I said I would...
Your rom is running really nicely on my tablet as I use it daily. It's smooth and small, with no unexpected reboots or fc's on installed apps. Didn't wipe internal SD but it hasn't given me any issues with existing data (probably because there wasn't much to start with).
One thing that has caused a problem is calendar sync. It looks like you've taken out the actual syncing service, so when I try to access my calendars through any app I'm asked to add a new Google account, even though everything's already set up in "Accounts" under Settings. I haven't tried running the "calendars.providers.apk" from my other phone, that should fix the problem - but I don't want to use the wrong version and break something!
Also, I've confirmed that the only time I got mounts2sd working, it was with thunderoar's kernel. So guess that's going to have to wait.
A few adjustments I made to the setup were to uninstall all "unnecessary" system apps (not needed to run the device), and re-install them from the store. This way I've got 676mb free on /system and still over 1.5GB free on internal storage.
I've also added a multi-reboot menu to make getting into recovery or download mode simpler, and this is loading more quickly on your rom than stock. I've also had to modify permissions.xml to allow apps to access external storage by default, and made another tweak to disable the "loud volume warning" (don't remember quite what it was offhand).
Would you consider adding these to a future version?
Again, thanks SO much for putting this together, answering questions, and doing your thing. It's greatly appreciated!
Click to expand...
Click to collapse
The calendar sync issue should be fixed in the next update.
Anyway, If I have enough time, the next update should contain a lot of new features. Your suggestions are already planned :good:

Jimbus369 said:
When you install a rom, especially a TW one, in most case you need a specific Bootloader to cause it to start and work smoothly.
....
The bootloader runs your rom with specific instructions, if the rom does not support an older bootloader simply does not boot. My rom does not support the older bootloader. A zip flash in this case cannot upgrade a delicate part like the bootloader. You need to flash the newer one with Odin.
Click to expand...
Click to collapse
One more question about this: The way you've worded the second paragraph seems to imply only that older bootloaders don't work with newer roms, so are newer bootloaders backwards compatible? Say I've got the PH5 bootloader installed and I want to restore a backup of the previous firmware, do I have to flash that firmware first?
Sorry if it seems obvious, this is how we learn!
Sent from my SM-G900W8 using XDA Labs

PushyPhoenix said:
One more question about this: The way you've worded the second paragraph seems to imply only that older bootloaders don't work with newer roms, so are newer bootloaders backwards compatible? Say I've got the PH5 bootloader installed and I want to restore a backup of the previous firmware, do I have to flash that firmware first?
Sorry if it seems obvious, this is how we learn!
Sent from my SM-G900W8 using XDA Labs
Click to expand...
Click to collapse
Absolutely it isn't obvious, don't worry . The Bootloader, for my personal experience, are backwards compatible. I don't have a scientific knowledge about this, but for what I did with other device it can work. Just try :fingers-crossed:, don't forget a full backup.

Calendar_sync_fix.zip
Here is a fix for calendar sync.
@PushyPhoenix Thanks for reporting this issue

Jimbus369 said:
Calendar_sync_fix.zip
Here is a fix for calendar sync.
@PushyPhoenix Thanks for reporting this issue
Click to expand...
Click to collapse
This is a huge help, as one reason for getting this tablet was to use the calendar on a bigger screen.... Thanks so much!
---------- Post added at 10:58 PM ---------- Previous post was at 10:50 PM ----------
Jimbus369 said:
The Bootloader, for my personal experience, are backwards compatible. I don't have a scientific knowledge about this, but for what I did with other device it can work. Just try :fingers-crossed:
Click to expand...
Click to collapse
Fantastic - it worked on my S5 (had to restore a backup to retrieve some data).
don't forget a full backup.
Click to expand...
Click to collapse
Never! The most important thing, along with wiping.

When is coming to FyrestoneROM V2 ?
And thank you very much. So love...

Does this work on sm-t116ny ?
Because no development for sm-t116ny .

dhruvpatel_9880 said:
Does this work on sm-t116ny ?
Because no development for sm-t116ny .
Click to expand...
Click to collapse
I don't think it can work. If your device codename is Goyave you can try. Let me know if it works

Jimbus369 said:
I don't think it can work. If your device codename is Goyave you can try. Let me know if it works
Click to expand...
Click to collapse
First of all thanks for replying
My device codename is Goyave3g5m probably .
Can you please tell me which all models have same codename "Goyave"?
And cm 11 for sm-t116 works well on my sm-t116ny.
I will try and let you know does it boots .
---------- Post added at 01:55 PM ---------- Previous post was at 01:40 PM ----------
It is working on sm-t116ny
But wifi hotspot not working
Please help

dhruvpatel_9880 said:
First of all thanks for replying
My device codename is Goyave3g5m probably .
Can you please tell me which all models have same codename "Goyave"?
And cm 11 for sm-t116 works well on my sm-t116ny.
I will try and let you know does it boots .
---------- Post added at 01:55 PM ---------- Previous post was at 01:40 PM ----------
It is working on sm-t116ny
But wifi hotspot not working
Click to expand...
Click to collapse
T113/T113nu and T116/T116ny have a similar codename and hardware (The recovery have goyave codename, therefore any rom with goyave codename can be flashed). For the hotspot, maybe some missing libraries, a different driver or a different kernel makes hotspot broken. Try to restore your kernel from a previous backup.

[Z2Pro] Zui 2.5.462 OTA (Nougat) full rom+firmware update (Magisk+Xposed work !)

Hi !
This is a backup of the latest OTA of ZUI by Zuk/Lenovo, already configured in english, chineses apps uninstalled, and playstore/google services installed.
Magisk root and unofficial Xposed-Magisk for Nougat work on this rom !
(I've tested Youtube Adaway, Youtube background, Lucky Patcher, Adblocker reborn, it's working well)
Your not need to do a wipe, and you can keep your data if you come to 2.5.435 ZUI rom ! But you have obligation to install boot & firmware, because latest OTA by zuk upgrade both !
[Quick Charge is disabled by default when the screen is on, look the screen capture, it's normal, this is a new setting come with this latest OTA, you can change that on developper settings ! ]
Link to download (hosted on my own webserver) : http://osremix.com/share/ZUI_2.5.462_ST_Clean_Android_7.0-TWRP_3.1.0.0_z2pro_2121.7z
MD5sum : dc9865f17bcfcdb141e0bf34f9612d0a
Magisk 13.3 (update to the latest APK when the apps purpose it to you) : https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
Latest Xposed for Magisk (SDK24/Android 7.0) : http://main.purifyos.it/xposed/magisk/SDK24/
Xposed manager APK : https://forum.xda-developers.com/devdb/project/?id=13191#downloads
​

The ROM is flashable with TWRP ? If I come from custom ROM (AEX) I'll need to do a full wipe or I'll need to flash via a PC ?

Is there any chance of multilanguage for this rom?

Bryandu13 said:
The ROM is flashable with TWRP ? If I come from custom ROM (AEX) I'll need to do a full wipe or I'll need to flash via a PC ?
Click to expand...
Click to collapse
No, you don't, when you restore this backup like another rom backup, it erase needed partitions
Billkaza said:
Is there any chance of multilanguage for this rom?
Click to expand...
Click to collapse
I don't know how to merge XML translation into rom, sorry.

After receiving OTA update to 462 ST, SOT is reduced to 4 hours of moderate usage (usually 5-6 hours).. Phone temperature is a bit warmer, standby temp usally 27 C, now is 32 C, charging temp is around 37 C.. It's a thin phone, you can feel when the temperature is going up..

Is the OTA update works in this rom? In System Update app I have info: "Your system has been root, we are unable to provide the latest version of the system"

ZUI OTA doesn't support unlocked bootloader, rooted or not the phone just shows this message when the bootloader is unlocked...

Hello, someone has already gained some experience about this Rom, is there anything you should know? Thank you

Anyone can help making this rom multilanguage?

Is francko76 the only one who can help us, or can anyone ask the creator of AEX?

how exactly do I install this? after many attempts I managed to get it, thanks for this
2nd edit: does the 5ghz WiFi work on this rom?

xxjahasotoxx said:
how exactly do I install this? after many attempts I managed to get it, thanks for this
2nd edit: does the 5ghz WiFi work on this rom?
Click to expand...
Click to collapse
how to install?

Giovanni Bruno said:
how to install?
Click to expand...
Click to collapse
If you're asking his to install this I made a backup of my current stock rom, and then looked in my files for the name of the backup that I made and put the twrp files folder in the same folder that the backup was in, after that just go to twrp and select restore and select twrp files as your restore
Edit 1: so apperantly I can make calls and receive them but I can't hear anyone and they can't hear me
Any ideas as to what I should try?

we can add any languag by morelocal2 app
in play store

would somene post the u-health app in this rom, thanks
camera apk as well plz...
thanks

Now I'd really would try your rom, bitte wherever and wherever I try to download, IT proceeds to 70%,and thats it, nö further progress...

tikilou said:
No, you don't, when you restore this backup like another rom backup, it erase needed partitions
I don't know how to merge XML translation into rom, sorry.
Click to expand...
Click to collapse
How do you install this backup? with TWRP?
We have to put the file in specific directory?

I used your backup to switch successfully from aex 4.5 to stock. Thank you very much.
@tikilou i would like to know how you backed up stock recovery since we restore it with TWRP

jppsousa said:
How do you install this backup? with TWRP?
We have to put the file in specific directory?
Click to expand...
Click to collapse
You just have to put the files in your twrp backup folder. Make a backup yourself in order for the folder to be created and then with a file manager replace your files with the files of this backup. After that just restore it with twrp

chtsarts said:
You just have to put the files in your twrp backup folder. Make a backup yourself in order for the folder to be created and then with a file manager replace your files with the files of this backup. After that just restore it with twrp
Click to expand...
Click to collapse
I think someone should finaly mention which Partitions should only be restored from a Backup of another user. Keep Radio & imeis in mind guys

[ROM]-Working MIUI 11 EU PIE for Mi Max 2 Oxygen [9]-[stable-ish]i

Android Version : MIUI-11-EU-PIE Easy recovery install.
You should be having proper knowledge of flashing Custom ROM and how to Restore a phone if anything goes wrong.
Take complete backup before taking any action based on this thread. I am not responsible for any action taken by you.
I am just compiling all the information / files available on different websites into this thread, I have patched together with cyber spit, bubblegum, and tape, for a pretty much fully working MIUI-11--EU-PIE running rom. With the help from Mohzuned. I have removed what I believe to be all of the bloat. We worked to modify a working pie vendor. Magisk v20 modified boot for root access, Just install magisk manager.
All Credit goes to respective developer/s. I request XDA moderator and or Developer of Respective files to let me know if I have forgotten to mentioned (give credit) their name in this thread. The Download Links are given directly from respective Developer/s.
You need the following two files to Test MIUI-11-EU-PIE on Mi Max 2 (Oxygen). This ROM recovery is ported from the Xiaomi RedMi with many patches and customized from various sources. This ROM maybe Stable enough for your daily use on Mi Max 2. I have access to two MM2 4/64 Global versions using a 1tb sd card one on At&t the other on Tmobile and MOST features I need are currently working.
1a. Treble Mi Max 2 Recovery 3.2.1 https://androidfilehost.com/?fid=5862345805528056270
1b. OrangeFox Recover 10
https://sourceforge.net/projects/ora...n.zip/download
2. MIUI-11-EU-PIE
https://drive.google.com/file/d/15lRb49s75rqVV0Kg8C16Eao_BuTPvBWr/view?usp=drivesdk
First step:
Start your phone into recovery and Flash a Treble recovery, if already not flashed. Restart into Recovery.
Click Wipe then Advance wipe and clear System, Vendor, Boot, Data, Cache, and Dalvick cache.
Second step:
Now Extract the Downloaded Rom files in Recovery backup folder. You should know where and how to Extract. (Use extract tool for android or pc then copy paste to recovery backup folder.)
Third step:
Click Restore and Select System, Boot, Vendor and Swipe to confirm. Wait for restore to complete. If any errors, Reboot recovery and try again. Or Mount the System, Vendor, Boot and try again. After Restore completes Reboot. Please allow 1-2 Minutes for first boot.
What works:
?
What doesn't work:
?
If I missed anything in the above, kindly let me know to include. If you make any further updates / patches that makes this ROM more stable / perfect or enables new features, please don't hesitate to message me to include in this thread.
I have an old PC running windows with 8gb max HDD at any one given time, So if you would like to make the recovery image into a flashable zip, I'd be happy to update/add it.
If you can afford it, Im trying to save for a computer from this decade, any help is appreciated
https://www.paypal.me/LiamMcGinnisIv
If you would like to use the boot, vendor, system, or any other files, All I ask is pass on the proper credits.
Any Others Who May Have Been Missed
Best of Luck and Happy Flashing )

Camera/Torch.

Camera, fingerprint and fm radio, dont work, congratulations, good rom. Thanks.

Cool....... thanks dude
liammc83 said:
Camera/Torch.
Click to expand...
Click to collapse
Iam ready for the test ride......

I will test today. Thank you for your job!

Beast developer...too fast man thanks

If you will fix Camera and Torch it will be great! We are all waiting! Thank you!
---------- Post added at 06:51 AM ---------- Previous post was at 06:38 AM ----------
May be it is better to do Port from Mi Mix 2S? Camera and Torch worked on that port.

Bro.......
I cannot find the fingerprint option in the rom..?
Firstly I upgraded from the nougat rom.,it made me to suck....it booted but instantly rebooted to recovery on every boot......
Cannot find the fingerprint option ..,Cannot add the face unlock option due to the camera bug...,it's harder always using pattern/pin.,? flashlight ? issue is negligible.....
But mi cloud has no issues and working fine able to login..
Home button isn't working.,full screen guesture option isn't seen in the rom..
May be it's because of the redmi note 4x....it might be good if it's from max3 or mix2s as u done previously.,only hotspot bug majorly
You are too good bro....,you are beastly fast and tough..,???

Please fix the camera!!!

zavorotnii said:
Please fix the camera!!!
Click to expand...
Click to collapse
He is trying continuously and I believe soon it will be resolved.

zavorotnii said:
Please fix the camera!!!
Click to expand...
Click to collapse
I'm not screaming "Donate!!!!!"
I do this for free for a phone I no longer use, please be patient.
Considering all sources from xiaomi are outdated, And this is being done again for FREE with modifications on an ancient netbook.
I also can now verify, I have a working modified vendor/boot image that will run gsi images, But again since problems with vendor no camera, Still working on it.

Sorry, I just asked. I understand your position and ready to test new changes

No need to wait for me to port.
https://forum.xda-developers.com/mi-max-2/development/mi-max-2-oxygen-gsi-bootable-vendor-t3987191

I really liked this rom .. I want to use daily ... only thing that is bothering me is the home button and the camera that is not working? already have a solution? fingerprint to taste .. but you can use with the pin normally

[GUIDE] Install LineageOS 20 on SM-T290 and SM-T295 with Google Apps (MindTheGapps)

Install LineageOS 20 on SM-T290 and SM-T295 with Google Apps (MindTheGapps)​
* Your warranty is now void. (It might already been)
* I am not responsible for any damage that it may do to your device. I WARNED YOU
* It's your choice to do it. Not mine. I just made it as I wanted to do it, but you have the choice to do so. If you choose to do it, you know that it may have consequences.
Click to expand...
Click to collapse
WARNING! This won't work on a bootloader with version U4! Flashing won't work and so you will not be able to use this guide. Unfortunately, you can also currently not downgrade the bootloader, making it impossible to get any custom stuff (custom recovery, custom ROM, etc.) on your device...
Hello there! This is another guide from me here on XDA Developers! Today, I will show you how to install LineageOS 20 on an SM-T290 and SM-T295, and yes, it works on both! Let's get started:
Prerequisites​But first, make sure you have all of this:
An SM-T290 or SM-T295 tablet
TWRP (v3.7.0 recommended for SM-T290 and v3.5.2 for SM-T295)
Unlocked bootloader
1. Download LineageOS 20 ZIP from here (There stands it is for gtowifi, but it also works on the LTE model).
2. Choose the nightly build for the ZIP, it is very stable even though it is nightly.
3. OPTIONAL BUT I DO NOT RECOMMEND: You could also choose the recovery, but that's more like the stock recovery and I recommend you to keep TWRP as it has better features.
4. Download the ZIP that has the format 'lineage-20.0-YYYYMMDD-nightly-gtowifi-signed.zip'
- OPTIONAL: Download the recovery image for LineageOS 20 with the format 'lineage-20.0-YYYYMMDD-recovery-gtowifi.img'.
5. Download MindTheGapps from here.
6. Choose the one with the format 'MindTheGapps-13.0.0-arm64-YYYYMMDD_BBBBBB.zip'
7. Follow the links to download the ZIP file.
8. Place the LineageOS and MindTheGapps ZIP to an SD card or USB drive. If you choose to also take LineageOS recovery, you will also need to place the .IMG to an SD card or USB drive.
9. Insert the SD card or USB drive into your tablet.
10. Boot the device into TWRP.
11. Go to 'Wipe' > 'Swipe to Wipe'.
12. Then go once again to 'Wipe' > 'Format data' > 'Swipe to format'.
13. Go to install, make sure that it is not install image but as flash ZIP!
14. Use the select storage button to choose the storage where the ZIPs are saved.
15. Choose the LineageOS 20 ZIP and swipe to install.
16. Wait until it is done and now install MindTheGapps.
17. Optional step (depending on whether you have the following things):
- Install Magisk (root) ZIP if you have it. You could also do this later on.
- Install LineageOS recovery ZIP if you have chosen to use it. This can also be done later.
17. Click on 'Reboot system' or go to 'Reboot' > 'System'.
18. Wait until the boot is done.
19. Go through the setup, but WAIT! First read the step below.
20. Depending on whether you have LineageOS recovery or TWRP, you need to enable the option 'Auto-update LineageOS Recovery/LOS Recovery' in the setup if you have LineageOS/LOS Recovery and disable that if you have TWRP.
21. Once the setup completed, you are done!

That was easy to follow. Thank you.

Heeni said:
That was easy to follow. Thank you.
Click to expand...
Click to collapse
No problem!

Heeni said:
That was easy to follow. Thank you.
Click to expand...
Click to collapse
Nice. Guess you have LineageOS 20 right now.

Minionguyjpro said:
Nice. Guess you have LineageOS 20 right now.
Click to expand...
Click to collapse
Yes. I was previously running a GSI, but I like this better.
I'm not using Gapps, so I just skipped para. 16. I did install Magisk.
Does OTA update work with TWRP, or only with Lineage recovery?

Heeni said:
Yes. I was previously running a GSI, but I like this better.
I'm not using Gapps, so I just skipped para. 16. I did install Magisk.
Does OTA update work with TWRP, or only with Lineage recovery?
Click to expand...
Click to collapse
It does work with TWRP. It uses an OpenRecoveryScript. If you have Gapps (which you don't have), you need to reflash them afterwards. Also Magisk needs to be reflashed, but it is much easier to do than the stock!

How does this tablet with LineageOS work now?
Has it become more responsive than the original Samsung ROM or does it continue to suffer from the same exasperating slowness that characterized it?

dequadim said:
How does this tablet with LineageOS work now? Has it become more responsive than the original Samsung ROM or does it continue to suffer from the same exasperating slowness that characterized it?
Click to expand...
Click to collapse
I'm not sure, but it has some good features though. Some parts are a bit buggy, but most are not. It's also much faster.

Hello, thank you for the installation guide. Used my T290 and everything was working perfectly fine... I then decided to use LineageOS for MicroG and also everything ist working...
LineageOS 20 for MicroG:
gtowifi
My other SM-T295 is now on Bootloader5 (T295XXS5CWA1) so I think there is no way anymore to get LineageOS 20 on it. I now ordered a "new" SM-T295, which is supposed to be on Android 9. When I use the Guide above, is the cellular modul and LTE working with the CustomRom? Or should I use the GSI? Why is it such a different between those two devices?

SGX22 said:
Hello, thank you for the installation guide. Used my T290 and everything was working perfectly fine... I then decided to use LineageOS for MicroG and also everything ist working...
LineageOS 20 for MicroG:
gtowifi
My other SM-T295 is now on Bootloader5 (T295XXS5CWA1) so I think there is no way anymore to get LineageOS 20 on it. I now ordered a "new" SM-T295, which is supposed to be on Android 9. When I use the Guide above, is the cellular modul and LTE working with the CustomRom? Or should I use the GSI? Why is it such a different between those two devices?
Click to expand...
Click to collapse
Hello there! LTE will not be included, but you have 2 workarounds:
Make a hotspot over Wi-Fi with your phone or any other SIM device
Use the GSI ROM, which may have support
Well, LTE doesn't work, because of this: LineageOS is made on base of the drivers and packages of the device. And, they are almost the same I think, that's why the other stuff will or should work. But, the SM-T295 also has a driver and/or package for the SIM, LTE and so. And because it was originally made for the SM-T290, instead of an SM-T295, it will not include those drivers and so the support for it. You could try a GSI, although I had issues with it. But I may have done it wrong or so.., I always say: if there is an official custom ROM, use that over GSI, because it was really made for the device and includes the drivers and packages for the device. Although I don't really know whether GSI is bad, it may also work correctly..., if you try GSI, and it doesn't work, you could take a look at this: https://forum.xda-developers.com/t/gsi-lte-fix.3925151/

dequadim said:
How does this tablet with LineageOS work now?
Has it become more responsive than the original Samsung ROM or does it continue to suffer from the same exasperating slowness that characterized it?
Click to expand...
Click to collapse
In my opinion it is much faster and very responsive. It is really an improvement!

SGX22 said:
In my opinion it is much faster and very responsive. It is really an improvement!
Click to expand...
Click to collapse
Well, I will install it as soon as I can.

I flashed TWRP on my T295 But unfortunately i got this eroor SECURE CHECK FAIL : recovery.img)

nima2005com said:
I flashed TWRP on my T295 But unfortunately i got this eroor SECURE CHECK FAIL : recovery.img)
Click to expand...
Click to collapse
That's I think because your bootloader version is 4 or higher, instead of 3..., this updates after an update, and it can also not be downgraded for now. Bootloader version 3 has not got this protection that disallows flashing custom things like TWRP. Bootloader version 4 and higher do have...

Minionguyjpro said:
That's I think because your bootloader version is 4 or higher, instead of 3..., this updates after an update, and it can also not be downgraded for now. Bootloader version 3 has not got this protection that disallows flashing custom things like TWRP. Bootloader version 4 and higher do have...
Click to expand...
Click to collapse
ok i haved installed this rom on T295 Android 9 Bootloader 3 And everything works .Thanks for making this awesome rom . the only bug i noticed is low brightness . i think oneui max brightness was higher than this rom

nima2005com said:
ok i haved installed this rom on T295 Android 9 Bootloader 3 And everything works .Thanks for making this awesome rom . the only bug i noticed is low brightness . i think oneui max brightness was higher than this rom
Click to expand...
Click to collapse
Note: as i experienced you cant install Twrp on android 10 bootloader 3

nima2005com said:
I flashed TWRP on my T295 But unfortunately i got this eroor SECURE CHECK FAIL : recovery.img)
Click to expand...
Click to collapse
You can repair it quickly. Please search on youtube.

Deleted, need to search some further to make sure it is correct...

nima2005com said:
ok i haved installed this rom on T295 Android 9 Bootloader 3 And everything works .Thanks for making this awesome rom . the only bug i noticed is low brightness . i think oneui max brightness was higher than this rom
Click to expand...
Click to collapse
Hello, I ordered a "new" T295 with Android 10, but it is T295XXU4BUD3 as well, like my old T295. Is there still no way to get LineageOS on it.
I must say I am very disappointed now. I tried so many things bought 3!!! Devices.. It is just to much work to get LineageOS on a tablet. Is there any (small Tablet) that I can put LineageOS on with LTE which is working. Man, I am trying this for 2 years now..... What about Sony Tablets?

SGX22 said:
Hello, I ordered a "new" T295 with Android 10, but it is T295XXU4BUD3 as well, like my old T295. Is there still no way to get LineageOS on it.
I must say I am very disappointed now. I tried so many things bought 3!!! Devices.. It is just to much work to get LineageOS on a tablet. Is there any (small Tablet) that I can put LineageOS on with LTE which is working. Man, I am trying this for 2 years now..... What about Sony Tablets?
Click to expand...
Click to collapse
Well, an old Samsung Galaxy Tab 4 with LineageOS 18.1 (Android 11). I helped someone today to get it on his device! It was very easy to do, so.