Related
So I downgraded my Oneplus 3 from 3.5.2 to 3.2.6 and this was kind of a painful process, so I decided to share my experience with you.
If you follow this guide you will successfully downgrade from the latest Community Build to the newly released stable.
Note: Just because this worked for me, doesn't mean that it will work for you! Use this guide on your own risk and always use backups!
You'll need:
- Oneplus with OOS 3.5.2 and modified TWRP
- OxygenOS 3.2.6 Full ROM
- Latest official TWRP
- AndroidSDKSlim (needs Oneplus 3 USB drivers installed)
- SuperSU 2.78 SR1
- Xposed Framework (optional)
- Debloat Script (optional)
Downgrade:
Before you start, please create a COMPLETE backup of all your data.
You will factory reset your phone during the process.
1. Copy OOS 3.2.6 Full ROM, SuperSU, Xposed, Debloat Script to your Oneplus
2. Flash modified TWRP if you haven't already
3. Boot into modified TWRP
4. Select Wipe -> Advanced Wipe -> Select all but internal storage -> Swipe to Wipe
5. Install OOS 3.2.6 Full ROM
6. Reboot into system and use the installation wizard to setup your phone (do not setup fingerprints, or any device PIN)
7. Reboot into bootloader
8. Connect your phone to a PC/Notebook
9. Extract AndroidSDKSlim to your Desktop and copy twrp-3.0.2-1-oneplus3.img into \AndroidSDKSlim\android-sdk-windows\platform-tools
10. Run CMD with admin rights and navigate to \AndroidSDKSlim\android-sdk-windows\platform-tools
11. Run "fastboot flash recovery twrp-3.0.2-1-oneplus3.img" to revert to official TWRP recovery
12. Disconnect your phone and boot into recovery
13. Dirty flash OOS 3.2.6 again (this might sound stupid but it's mandatory)
14. Still in recovery, flash SuperSU, Xposed and Debloat Script
15. Wipe Dalvik & Cache
16. Reboot into system and setup your phone
Thanks for your guide !
Can you just please detail how to revert back to a custom ROM like RR or Nuclear when we come from Oxygen OS 3.5.2 community build ?
darkbash said:
Thanks for your guide !
Can you just please detail how to revert back to a custom ROM like RR or Nuclear when we come from Oxygen OS 3.5.2 community build ?
Click to expand...
Click to collapse
You're welcome.
Unfortunately, I can't provide guides for procedures I never went through.
But I asume that you could just flash any Custom ROM after you completely wiped your phone in step 4. So instead of flashing OOS 3.2.6 afterwards, just flash a custom ROM. Be sure that you have all zips you need on your internal storage and a backup to revert back to, if anything goes wrong. Otherwise you will have to use ADB sideload to install a ROM.
Ok, so I have a Modified TWRP installed already. Question is If I want to flash other ROMS after wiping system,dalvik/cache,data etc. Do I have to Flash official TWRP first followed by firmware,ROM, etc?
or firmware first then ROM and lastly official TWRP?
it's quite confusing.
I made a mistake and I installed the modified recovery installed the 3.5.2 rom and before booting I decided to restore my nand backup so I flashed the official twrp recovery and now I can't go to recovery anymore and the phone doesn't boot.
I imagine I have to sideload the modified twrp again but how do I do that? How do I reboot to bootloader ?
This is the only sign of life
gigeaky said:
I made a mistake and I installed the modified recovery installed the 3.5.2 rom and before booting I decided to restore my nand backup so I flashed the official twrp recovery and now I can't go to recovery anymore and the phone doesn't boot.
I imagine I have to sideload the modified twrp again but how do I do that? How do I reboot to bootloader ?
This is the only sign of life
Click to expand...
Click to collapse
Flash modified TWRP, and the recovery will return. then, follow the guide. it happened to me too.
darkbash said:
Thanks for your guide !
Can you just please detail how to revert back to a custom ROM like RR or Nuclear when we come from Oxygen OS 3.5.2 community build ?
Click to expand...
Click to collapse
First flash modified TWRP than install official 3.2.4 than flash CM ROM or custom ROM
uniQ191 said:
So I downgraded my Oneplus 3 from 3.5.2 to 3.2.6 and this was kind of a painful process, so I decided to share my experience with you.
If you follow this guide you will successfully downgrade from the latest Community Build to the newly released stable.
Note: Just because this worked for me, doesn't mean that it will work for you! Use this guide on your own risk and always use backups!
You'll need:
- Oneplus with OOS 3.5.2 and modified TWRP
- OxygenOS 3.2.6 Full ROM
- Latest official TWRP
- AndroidSDKSlim (needs Oneplus 3 USB drivers installed)
- SuperSU 2.78 SR1
- Xposed Framework (optional)
- Debloat Script (optional)
Downgrade:
Before you start, please create a COMPLETE backup of all your data.
You will factory reset your phone during the process.
1. Copy OOS 3.2.6 Full ROM, SuperSU, Xposed, Debloat Script to your Oneplus
2. Flash modified TWRP if you haven't already
3. Boot into modified TWRP
4. Select Wipe -> Advanced Wipe -> Select all but internal storage -> Swipe to Wipe
5. Install OOS 3.2.6 Full ROM
6. Reboot into system and use the installation wizard to setup your phone (do not setup fingerprints, or any device PIN)
7. Reboot into bootloader
8. Connect your phone to a PC/Notebook
9. Extract AndroidSDKSlim to your Desktop and copy twrp-3.0.2-1-oneplus3.img into \AndroidSDKSlim\android-sdk-windows\platform-tools
10. Run CMD with admin rights and navigate to \AndroidSDKSlim\android-sdk-windows\platform-tools
11. Run "fastboot flash recovery twrp-3.0.2-1-oneplus3.img" to revert to official TWRP recovery
12. Disconnect your phone and boot into recovery
13. Dirty flash OOS 3.2.6 again (this might sound stupid but it's mandatory)
14. Still in recovery, flash SuperSU, Xposed and Debloat Script
15. Wipe Dalvik & Cache
16. Reboot into system and setup your phone
Click to expand...
Click to collapse
worked like magic. Thankyou for this education. it didnt work when i followed other folks. Much appreciated.
So it seems I have booted with 3.5.2 and modified recovery. Now my question is: can I reboot in recovery at step 7 and install the original twrp recovery? Or can I use flashify? As I don't have access to a pc
I did ok but cant use adaway do you have a fix for it?
Enviado do meu ONEPLUS A3003 através de Tapatalk
I'm trying to return to 3.2.6 after trying 3.5.2.
However, after flashing and booting 3.2.6, I boot into fastboot mode and the official TWRP refuses to flash. It reports that it's failed and then I'm left with no recovery until I reflash the modified TWRP.
I could try restoring my Nandroid backup of 3.2.6 with the modified TWRP, but I'd prefer to return to the official TWRP before doing this.
Any suggestions?
Edit: Fixed it. I downloaded the official TWRP again and it flashed. The first download must have been corrupted.
I followed a different method and successfully downgraded today to a former nandroid. I was rooted without xposed.
3.2.6 to 3.5.2 dirty flash
- installed modded twrp
- performed backup on 3.2.6
- installed modded 3.5.2 (the only that flashes in twrp)
- installed root SR1
- wiped caches only
- reboot
3.5.2 to 3.2.6 restore
- downloaded 3.2.6
- boot to modded twrp, wipe both caches, data, system
- flashed 3.2.6 stock and root SR1
- restored 3.2.6
- wiped caches
- reboot
- enjoying my LTE again
Without first installing stock, after a restore my phone was boot locking right after the oneplus white logo (capacitive buttons would light up, but it would not boot to red logo). Had to press vol down and power to force it to boot menu to select recovery and get back to twrp
Hope this helps someone, it's a bit easier than swapping twrps and no need to boot up/flash 3.2.x twice.
So if I am on the CB and want to go back to 3.2.6
I can flash 3.2.6 with the modded TWRP
Then flash Official TWRP and boot?
If I have official recovery, no root, and locked bootloader, can I downgrade from 3.5.3 to 3.2.6 without any problems, just by sideloading the zip in ADB? Thankss
popab said:
If I have official recovery, no root, and locked bootloader, can I downgrade from 3.5.3 to 3.2.6 without any problems, just by sideloading the zip in ADB? Thankss
Click to expand...
Click to collapse
i would also like to know this please
bigup7 said:
i would also like to know this please
Click to expand...
Click to collapse
I did it and it does work perfectly. Just make sure to wipe data from recovery after flashing.
I was on Comunity Build v.3.5.4. I want it back FreeDom v.1.6.
I did:
1. Flash Twrp-3.0.2-19-oneplus3.img.zip. Somebody sugested original twrp 3.0.2.1 from twrp site. For me did NOT work. Phone not booting in recovery with 3021.
2. Advanced wipe. Wipe dalvik cache/cache/system/data
3. Flash Freedom v.1.6. Clean Flash it's safer & better.
Done. System works. Recovery works.
null0seven said:
I was on Comunity Build v.3.5.4. I want it back FreeDom v.1.6.
I did:
1. Flash Twrp-3.0.2-19-oneplus3.img.zip. Somebody sugested original twrp 3.0.2.1 from twrp site. For me did NOT work. Phone not booting in recovery with 3021.
2. Advanced wipe. Wipe dalvik cache/cache/system/data
3. Flash Freedom v.1.6. Clean Flash it's safer & better.
Done. System works. Recovery works.
Click to expand...
Click to collapse
I am on CB Freddom os
I want to go back either to stock or to op3lite.
I cant reboot to recovery.
But adb works yet.
What to do plz suggest.
Sent from my ONEPLUS A3003 using Tapatalk
1. If system don't boot. Reboot to fastboot.
- Flash recovery.img. If PC don't see youre phone option 2.
2. If system boots, open phone like normal.
- Extract recovery img. Put it on the TWRP file on phone sd card.
- Download Flashify from play. Open it, flash img of recovery. Open recovery to chech if it works.
Try with both recovery (3.0.2.0 or modified 3.0.2.-19). One of those will work.
Im getting system partition has unexpected contents after OTA update after installing step 5 ????
Hello guys.
I've just tried to update to MIUI 9.0.1.0 NDDMIEI from MIUI 8.5.9.0 NDDMIED on device Xiaomi Mi Max 2 but it failed.
I have an unlocked bootloader and SuperSu installed, but the recovery is Mi Stock Recovery. :cyclops:
I had directly booted TWRP Recovery without flashing using
Code:
fastboot boot twrp.img
to flash SuperSu on device. :good:
Need support with this issue. I don't want to flash whole ROM every time I recieve an update.
steve.24 said:
Hello guys.
I've just tried to update to MIUI 9.0.1.0 NDDMIEI from MIUI 8.5.9.0 NDDMIED on device Xiaomi Mi Max 2 but it failed.
I have an unlocked bootloader and SuperSu installed, but the recovery is Mi Stock Recovery. :cyclops:
I had directly booted TWRP Recovery without flashing using
Code:
fastboot boot twrp.img
to flash SuperSu on device. :good:
Need support with this issue. I don't want to flash whole ROM every time I recieve an update.
Click to expand...
Click to collapse
i successfully flashed to miui v9(V9.0.1.0.NDDMIEI) over miui v8(V8.5.8.0.NDDMIED) without data wipe. all my data were intact
Keep a backup just in case
make sure you downloaded recovery flashable full rom package ~1.38GB (not the 500mb OTA update )
donot wipe data/cache/dalvik
flash via TWRP recovery
just flashing rom wont boot due to dm-verity. (result will be bootloop)
u need to flash super user or magisk (or lazy flasher "ive not tried though" ) which patches boot.img which makes rom bootable
reversegear said:
i successfully flashed to miui v9(V9.0.1.0.NDDMIEI) over miui v8(V8.5.8.0.NDDMIED) without data wipe. all my data were intact
Keep a backup just in case
make sure you downloaded recovery flashable full rom package ~1.38GB (not the 500mb OTA update )
donot wipe data/cache/dalvik
flash via TWRP recovery
just flashing rom wont boot due to dm-verity. (result will be bootloop)
u need to flash super user or magisk (or lazy flasher "ive not tried though" ) which patches boot.img which makes rom bootable
Click to expand...
Click to collapse
I'll give it a try. Currently I have data wiped and installed full ROM through fastboot method. So next time, for sure I'll give it a shot.
But I have a doubt, where TWRP be able to flash an MIUI ROM. I mean the bootloader unlocked, encrypted system partition and all.
Since you have your device rooted, first install flashify, and backup your stock recovery. Then you can flash twrp recovery and install Miui 9, and root the device again. Last, install flashify again and restore your stock recovery.
scholastova said:
Since you have your device rooted, first install flashify, and backup your stock recovery. Then you can flash twrp recovery and install Miui 9, and root the device again. Last, install flashify again and restore your stock recovery.
Click to expand...
Click to collapse
Can you give stock recovery from mi max 2? I forgot to back up his original recovery stock and was hit with twrp.
Hello.
I flash OnePlus 3T stock pie 9.0.3 to (ROM) aroma pie 9.0.4 with twrp (3.2.3.1)
My mobile got brick after then i use msmdownload tool from 1.11Gb mega.nz l then i got back my phone on Marshalls mallow but when i trying to upgrade to stock 9.0.3 pie with the twrp 3.2.3.1 successful flashed the rom and reboot to system but i can boot to system 3,4 hours still loading on red circle when stock first boot logo please help me what i do i need to upgrade stock 9.0.3 pie at least instead of custom rom now im using Miui 10 in OnePlus 3T so please guide me how i can back to upgraded os because i don't want to use custom rom
zunairkh said:
Hello.
I flash OnePlus 3T stock pie 9.0.3 to (ROM) aroma pie 9.0.4 with twrp (3.2.3.1)
My mobile got brick after then i use msmdownload tool from 1.11Gb mega.nz l then i got back my phone on Marshalls mallow but when i trying to upgrade to stock 9.0.3 pie with the twrp 3.2.3.1 successful flashed the rom and reboot to system but i can boot to system 3,4 hours still loading on red circle when stock first boot logo please help me what i do i need to upgrade stock 9.0.3 pie at least instead of custom rom now im using Miui 10 in OnePlus 3T so please guide me how i can back to upgraded os because i don't want to use custom rom
Click to expand...
Click to collapse
At first use the latest TWRP 3.3.0.1
https://eu.dl.twrp.me/oneplus3/
Then try again...
Master_TC said:
At first use the latest TWRP 3.3.0.1
https://eu.dl.twrp.me/oneplus3/
Then try again...
Click to expand...
Click to collapse
You should have said "use the latest", in this case 3.3.1-0 instead
Master_TC said:
At first use the latest TWRP 3.3.0.1
https://eu.dl.twrp.me/oneplus3/
Then try again...
Click to expand...
Click to collapse
Can i use aroma 9.0.3 or OOS 9.0.3 with twrp3.3.0.1
Immortalis said:
You should have said "use the latest", in this case 3.3.1-0 instead
Click to expand...
Click to collapse
Can i use aroma 9.0.3 or OOS 9.0.3 with twrp3.3.0.1
zunairkh said:
Can i use aroma 9.0.3 or OOS 9.0.3 with twrp3.3.0.1
Click to expand...
Click to collapse
Yes you can.
The latest version is 3.3.1.0. Sorry i have mistyped.
i failed
i tried with letest twrp 3.3.1.0 recovery OOS.9.0.3 modem zip then i flash OOS9.0.3 FIRMWARE but still stuck on booting not enter in system
Master_TC said:
Yes you can.
The latest version is 3.3.1.0. Sorry i have mistyped.
Click to expand...
Click to collapse
i tried with letest twrp 3.3.1.0 recovery OOS.9.0.3 modem zip then i flash OOS9.0.3 FIRMWARE but still stuck on booting not enter in system
zunairkh said:
i tried with letest twrp 3.3.1.0 recovery OOS.9.0.3 modem zip then i flash OOS9.0.3 FIRMWARE but still stuck on booting not enter in system
Click to expand...
Click to collapse
OK you want to use the original OxygenOS 9.0.4?
Then go this way (all your data will be lost!):
1. in TWRP (3.3.1.0) delete all partitions (Dalvik, Cache, System, Data,...)
2. reboot into TWRP
3. format Data in Wipe - Format Data - type YES
4. reboot into TWRP
5. connect your phone with your computer and install full OxygenOS 9.0.4 zip (download from OP page)
6. reboot into TWRP and install magisk, if you want to keep TWRP. Else reboot into system
First boot takes 5-10 Minutes.
Thanks sir i will try and inform you if it work i will be thanks ful
Master_TC said:
OK you want to use the original OxygenOS 9.0.4?
Then go this way (all your data will be lost!):
1. in TWRP (3.3.1.0) delete all partitions (Dalvik, Cache, System, Data,...)
2. reboot into TWRP
3. format Data in Wipe - Format Data - type YES
4. reboot into TWRP
5. connect your phone with your computer and install full OxygenOS 9.0.4 zip (download from OP page)
6. reboot into TWRP and install magisk, if you want to keep TWRP. Else reboot into system
First boot takes 5-10 Minutes.
Click to expand...
Click to collapse
step 1 All partition include ( internal storage)?
Step 5 for transfer file oxygenos.zip? How to install though computer adb sideload or twrp flashing swipe
zunairkh said:
step 1 All partition include ( internal storage)?
Step 5 for transfer file oxygenos.zip? How to install though computer adb sideload or twrp flashing swipe
Click to expand...
Click to collapse
1. without internal storage (you can wipe it too, if you don't have any important data)
5. yes to transfer file or you use a sdcard. install OS in TWRP
I wiped all thing
And wiped format data and instll oxygen os 9.0.4 with magisk
Thanks ? you solve my issue
If i want to imstall aroma rom so can i do same process
?
zunairkh said:
I wiped all thing
And wiped format data and instll oxygen os 9.0.4 with magisk
Thanks you solve my issue
If i want to imstall aroma rom so can i do same process
?
Click to expand...
Click to collapse
Yes, so you can install all roms clean and without problems.
Don't forget to save your data!
Master_TC said:
Yes, so you can install all roms clean and without problems.
Don't forget to save your data!
Click to expand...
Click to collapse
Is there any method i can download miui cloud message,call history backup without install miui rom
Device variant: XT19121-2 James
Chipset: MSM8920
After repeated failed flashes I am on stock firmware using this guide. Phone boots and works normally right now, but I can't seem to flash any Custom ROMs on to my phone. I was using this post to flash Lineage OS 15.1, which worked successfully at first, but the WiFi wasn't working so I reflashed it. It still didn't work so I did it again, wiping Dalvik/Cache too. After the second flash attempt, my phone began to only flicker on and off. I made sure to always clean flash, factory resetting, wiping Cache and Dalvik, even formatting data, but no matter what I do it doesn't work. Also attempted other GSI images (arm, A-only) like AOSP, ResurrectionRemix and phhusson's Lineage OS 15.1 But they all failed too. I am using TWRP for James v 3.3.1 although I did also try other TWRP images like v 3.2.1 . But it makes no difference. Also used Magisk v19 like some guides suggested but whether I have Magisk or not, it doesn't work. Even made sure to push the fstab.qcom file to /vendor. Anytime a Custom ROM is flashed whether zip or GSI img it goes past the initial "bad key" or "N/A" screen and starts flickering on and off. Bootloader and TWRP works fine, but that's about it. Everytime a flash fails I go back to stock firmware (which always works) and try another ROM. I wonder why the first attempt worked but doesn't anymore even if I mirror the exact steps I took from stock. If anyone has any solutions I would be really grateful. Let me know if you need any more information.
have you taken any recent OTA updates?
mikeshutte said:
have you taken any recent OTA updates?
Click to expand...
Click to collapse
Nope. Still on the 8.0.0 version the stock firmware comes in.
tkhan7916 said:
Nope. Still on the 8.0.0 version the stock firmware comes in.
Click to expand...
Click to collapse
Okay give this a try, I'm assuming you have old root access and TWRP installed.
Download any Android 9 GSI of your liking, boot to TWRP.
Do a complete nandroid backup of the stock firmware.
Do a factory reset then wipe system partition.
Next flash your GSI that you downloaded to your system partition.
After flashing is complete of the GSI reboot to recovery.
After reboot completed flash your open Gapps zip. Then reflash Magisk.
if you get a error message when flashing g apps then you will need to use magic g apps with magisk as it will install them systemless. I have to do this on my device because the partition doesn't have enough space.
Give that a try and let me know how it goes if you have any questions feel free to ask.
---------- Post added at 10:09 PM ---------- Previous post was at 09:59 PM ----------
tkhan7916 said:
Nope. Still on the 8.0.0 version the stock firmware comes in.
Click to expand...
Click to collapse
mikeshutte said:
Okay give this a try, I'm assuming you have old root access and TWRP installed.
Download any Android 9 GSI of your liking, boot to TWRP.
Do a complete nandroid backup of the stock firmware.
Do a factory reset then wipe system partition.
Next flash your GSI that you downloaded to your system partition.
After flashing is complete of the GSI reboot to recovery.
After reboot completed flash your open Gapps zip. Then reflash Magisk.
if you get a error message when flashing g apps then you will need to use magic g apps with magisk as it will install them systemless. I have to do this on my device because the partition doesn't have enough space.
Give that a try and let me know how it goes if you have any questions feel free to ask.
Click to expand...
Click to collapse
I also just noticed you are using the latest version of TWRP 3.3.1. I'm not sure if you originally rooted and installed TWRP with the original patched version by Cody or not, but if so make sure with the new version that you format your data partition to f2fs. As this will ensure correct mounting of the data partition.
mikeshutte said:
Okay give this a try, I'm assuming you have old root access and TWRP installed.
Download any Android 9 GSI of your liking, boot to TWRP.
Do a complete nandroid backup of the stock firmware.
Do a factory reset then wipe system partition.
Next flash your GSI that you downloaded to your system partition.
After flashing is complete of the GSI reboot to recovery.
After reboot completed flash your open Gapps zip. Then reflash Magisk.
if you get a error message when flashing g apps then you will need to use magic g apps with magisk as it will install them systemless. I have to do this on my device because the partition doesn't have enough space.
Give that a try and let me know how it goes if you have any questions feel free to ask.
Click to expand...
Click to collapse
Followed these steps exactly, including formatting the data partition to f2fs, and the same problem still persists. Screen just keeps turning on and off in a loop without booting into the ROM. I downloaded the Lineage OS 16.0 GSI A-only Arm version for reference.
I am having the same issue
Using XT1921-1
Latest TWRP
Have tried LOS 15, LOS 16, AOSP 8.1, AOSP 9.0
Have tried flashing in fastboot and TWRP
Have tried every combo of wipe/factory reset/format data and magisk flash possible
have tried stock recovery, have tried no verity, have tried stock boot.img
nothing works. only able to produce powered on (black and blank) screen that turns on and off for a minute before returning to bootloader
PLEASE HELP
think i might need a 8.0 GSI but cant find one anywhere
I eventually got RR to boot on the james xt-1921-3 I installed XT1921-3_JAMES_T_MPCS_8.0.0_OCPS27.91-150-5-1-3_cid21 as a base, then used boot and vendor partitions from JAMES_T_OCP27.91-51-4_cid21_subsidy-TMO_RSU_regulatory-DEFAULT_CFC and it finally worked.
tkhan7916 said:
Followed these steps exactly, including formatting the data partition to f2fs, and the same problem still persists. Screen just keeps turning on and off in a loop without booting into the ROM. I downloaded the Lineage OS 16.0 GSI A-only Arm version for reference.
Click to expand...
Click to collapse
Message me, I'll host a TWRP backup for the XT-1921-3 that boots RR 6.1
Download the file from this post https://forum.xda-developers.com/android/software/universal-dm-verity-forceencrypt-t3817389 , then using fastboot, flash the vendor and boot img
fastboot flash vendor vendor.img
fastboot flash boot boot.img
then boot into recovery and flash the file from that post to disable dm-verity and force encrytion, after that flash magisk, then reboot to bootloader, at command prompt-
fastboot erase userdata
fastboot erase cache
fastboot reboot
that should get you booted - profit
mrbox23 said:
Message me, I'll host a TWRP backup for the XT-1921-3 that boots RR 6.1
Click to expand...
Click to collapse
Do you still have that back up by any chance and could ypu send it to me?
Hi all,
I was on xiaomi.eu MIUI 11 ROM for some time, but wanted to switch to either Evolution or Syberia ROM.
I did a complete wipe and installed evolution os trough twrp... but i forgot to remove encryption so i bricked my device...
So then, I flashed the latest stock rom (11.05)with Xiaomi flash tool, but then i was stuck with the chinese ROM so...
1. I went back to bootloader and flashed mauronofrio's TWRP recovery .
2. completely wiped phone; Cache,System,Data,Internal storage
3. copied Evolution OS 4.1 to my phone
4. installed zip trough TWRP, all successfull
5. but then when rebooting, TWRP says:"No OS installed, do you wish to continue"
6. i tried other ROMs like xiaomi.eu and syberia, but these would either give me the same problem, or just bootloop until iam back in the fastboot screen...
Anyone any idea what iam doing wrong?
dev-DaT said:
Hi all,
I was on xiaomi.eu MIUI 11 ROM for some time, but wanted to switch to either Evolution or Syberia ROM.
I did a complete wipe and installed evolution os trough twrp... but i forgot to remove encryption so i bricked my device...
So then, I flashed the latest stock rom (11.05)with Xiaomi flash tool, but then i was stuck with the chinese ROM so...
1. I went back to bootloader and flashed mauronofrio's TWRP recovery .
2. completely wiped phone; Cache,System,Data,Internal storage
3. copied Evolution OS 4.1 to my phone
4. installed zip trough TWRP, all successfull
5. but then when rebooting, TWRP says:"No OS installed, do you wish to continue"
6. i tried other ROMs like xiaomi.eu and syberia, but these would either give me the same problem, or just bootloop until iam back in the fastboot screen...
Anyone any idea what iam doing wrong?
Click to expand...
Click to collapse
This works for me every time.
1 Flash the latest fastboot ROM.
2 Flash TWRP (same one you used)
3 Boot into TWRP (use the vol+ button when booting)
4 In format menu swipe to factory reset, then format data (VERY IMPORTANT this must be FORMAT not just wipe)
5 In reboot menu boot into recovery, this ensures TWRP correctly accesses the newly formatted data partition.
6 Copy over the ROM (and GApps, if needed and/or Magisk)
7 Flash the ROM, (then GApps if needed)
8 Boot into system and do the initial setup
9 If installing Magisk, boot back to TWRP and install Magisk.
There is no need to wipe anything else. There is no need to wipe anything again after installing. There is no need to disable encryption or dm-verity.
Robbo.5000 said:
This works for me every time.
1 Flash the latest fastboot ROM.
2 Flash TWRP (same one you used)
3 Boot into TWRP (use the vol+ button when booting)
4 In format menu swipe to factory reset, then format data (VERY IMPORTANT this must be FORMAT not just wipe)
5 In reboot menu boot into recovery, this ensures TWRP correctly accesses the newly formatted data partition.
6 Copy over the ROM (and GApps, if needed and/or Magisk)
7 Flash the ROM, (then GApps if needed)
8 Boot into system and do the initial setup
9 If installing Magisk, boot back to TWRP and install Magisk.
There is no need to wipe anything else. There is no need to wipe anything again after installing. There is no need to disable encryption or dm-verity.
Click to expand...
Click to collapse
thanks, i always thought that a wipe was sufficient, or at least equal to a format... anyways will report back later when i have time to try it. lets hope it works because i can't handle this chinese rom
dev-DaT said:
thanks, i always thought that a wipe was sufficient, or at least equal to a format... anyways will report back later when i have time to try it. lets hope it works because i can't handle this chinese rom
Click to expand...
Click to collapse
The format is needed to temporarily remove encryption
I've just remembered that I missed an important step. Call it step 1.5
If you going to flash immediately after flashing official MIUI you must boot into MIUI once before doing anything else. You don't need to go through the set-up, you can boot immediately into fastboot after you get to the initial set-up page. The first boot finalises the install and is needed before you flash over the top of it. That may be the cause of your issue if you had missed this before.
Robbo.5000 said:
The format is needed to temporarily remove encryption
I've just remembered that I missed an important step. Call it step 1.5
If you going to flash immediately after flashing official MIUI you must boot into MIUI once before doing anything else. You don't need to go through the set-up, you can boot immediately into fastboot after you get to the initial set-up page. The first boot finalises the install and is needed before you flash over the top of it. That may be the cause of your issue if you had missed this before.
Click to expand...
Click to collapse
Ok so i flashed TWRP again, rebooted to stock rom and then rebooted into recovery, but the stock recovery is still there.
When i flash TWRP and reboot into recovery immediately i can enter TWRP, but if i reboot the phone to MIUI and then reboot again, TWRP is gone again...
It seems like TWRP does not persist... now iam stuck again on fastboot screen because i wiped + formatted everything.
Edit:
When i want to flash recovery it says "OKAY" but it is unable to boot:
Sending 'recovery' (65536 KB) OKAY [ 1.562s]
Writing 'recovery' OKAY [ 0.333s]
Finished. Total time: 1.989s
Sending 'boot.img' (65536 KB) OKAY [ 1.547s]
Booting FAILED (remote: 'Failed to load/authenticate boot image: Load Error')
fastboot: error: Command failed
dev-DaT said:
Ok so i flashed TWRP again, rebooted to stock rom and then rebooted into recovery, but the stock recovery is still there.
When i flash TWRP and reboot into recovery immediately i can enter TWRP, but if i reboot the phone to MIUI and then reboot again, TWRP is gone again...
It seems like TWRP does not persist... If i wipe all data trough TWRP and then reboot, i don't have OS but i do reboot back into TWRP, because well, there is nothing else...
Click to expand...
Click to collapse
This is normal, MIUI will restore stock recovery of the recovery partition changes. In order to persist TWRP you need to either install Magisk, disable dm-verity or install a custom ROM.
If you are going to flash a custom ROM, then you should do so immediately after flashing TWRP.
After formatting data, TWRP has an issue seeing the data partition, so go to the reboot menu in TWRP and select to reboot to recovery.
Then you can immediately install the ROM of choice. You cannot boot back into system as you'll lose TWRP.
Robbo.5000 said:
This is normal, MIUI will restore stock recovery of the recovery partition changes. In order to persist TWRP you need to either install Magisk, disable dm-verity or install a custom ROM.
If you are going to flash a custom ROM, then you should do so immediately after flashing TWRP.
After formatting data, TWRP has an issue seeing the data partition, so go to the reboot menu in TWRP and select to reboot to recovery.
Then you can immediately install the ROM of choice. You cannot boot back into system as you'll lose TWRP.
Click to expand...
Click to collapse
Ok, it appears that everytime i wipe system, i am not able to boot anymore into TWRP... Am i supposed to wipe System? or only wipe data & format data
dev-DaT said:
Ok, it appears that everytime i wipe system, i am not able to boot anymore into TWRP... Am i supposed to wipe System? or only wipe data & format data
Click to expand...
Click to collapse
There is no need to wipe system. You only need to wipe cache and dalvik and format data. (I choose to factory reset because it's easier in TWRP, but you could do advanced wipe and select cache and dalvik, then format data. Follow the steps exactly, but include my later step 1.5
I've just followed this myself today, as I've moved from LOS to the latest unofficial Havoc build.
In theory you could start by booting to fastboot and flashing TWRP again, then follow the steps from that point. You probably don't need to install MIUI.
Robbo.5000 said:
There is no need to wipe system. You only need to wipe cache and dalvik and format data. (I choose to factory reset because it's easier in TWRP, but you could do advanced wipe and select cache and dalvik, then format data. Follow the steps exactly, but include my later step 1.5
I've just followed this myself today, as I've moved from LOS to the latest unofficial Havoc build.
In theory you could start by booting to fastboot and flashing TWRP again, then follow the steps from that point. You probably don't need to install MIUI.
Click to expand...
Click to collapse
Ok thanks a lot! So no need to wipe system partition after stock rom install. just wipe cache/dalvik/data, got it.
Most ROM install guides tell you to wipe /system when coming from stock rom. I guess this requirement has changed? or depends on what ROM you're coming from?
Use can use my guide
https://forum.xda-developers.com/k20-pro/how-to/simple-beginners-guide-to-raphaelin-t4020543
it has how to flash roms, and fastboot fix. (which tells why the Recovery isn't staying)
Robbo.5000 said:
This works for me every time.
1 Flash the latest fastboot ROM.
2 Flash TWRP (same one you used)
3 Boot into TWRP (use the vol+ button when booting)
4 In format menu swipe to factory reset, then format data (VERY IMPORTANT this must be FORMAT not just wipe)
5 In reboot menu boot into recovery, this ensures TWRP correctly accesses the newly formatted data partition.
6 Copy over the ROM (and GApps, if needed and/or Magisk)
7 Flash the ROM, (then GApps if needed)
8 Boot into system and do the initial setup
9 If installing Magisk, boot back to TWRP and install Magisk.
There is no need to wipe anything else. There is no need to wipe anything again after installing. There is no need to disable encryption or dm-verity.
Click to expand...
Click to collapse
I need help... The reason why I'm flashing custom rom is, when the latest update came MIUI 12.5 android 11, all sensors of my phone stopped working like (Gyroscope, accelerometer, proximity sensor) I tied to flash the rom by fastboot method but still the problem persists. because of that I unlocked bootloader and flashed twrp. After flashing custom rom when I tried to boot it, it stuck on booting screen and when I tried to reboot into recovey it is showing fastboot mode. I'm unable to boot into custom rom.
dev-DaT said:
Hi all,
I was on xiaomi.eu MIUI 11 ROM for some time, but wanted to switch to either Evolution or Syberia ROM.
I did a complete wipe and installed evolution os trough twrp... but i forgot to remove encryption so i bricked my device...
So then, I flashed the latest stock rom (11.05)with Xiaomi flash tool, but then i was stuck with the chinese ROM so...
1. I went back to bootloader and flashed mauronofrio's TWRP recovery .
2. completely wiped phone; Cache,System,Data,Internal storage
3. copied Evolution OS 4.1 to my phone
4. installed zip trough TWRP, all successfull
5. but then when rebooting, TWRP says:"No OS installed, do you wish to continue"
6. i tried other ROMs like xiaomi.eu and syberia, but these would either give me the same problem, or just bootloop until iam back in the fastboot screen...
Anyone any idea what iam doing wrong?
Click to expand...
Click to collapse
Bro I have one doubt, I installed pixel os successfully then I roll back into stock os(miui) with locking bootloader, the. Again I unlock bootloader successfully, but the problem is I am unable to install os, i tried wipe data, catch. But the stock rom was not removed. What can I do?
Using orange fox in resmi note 10 pro