The 0x992566 error is because when using "SP flash tool" and using the "Format all" option it causes us to erase all partitions on the device and if you thought that you bricked the phone and it won't react anymore, relax, because
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
it's an easy fix for that you have to install the "Oppo_Custom" partition but keep in mind something:
If you got to have the "NvRAM" and "NVdata" partition you can recover the IMEI but if not then this tutorial will only fix the system but will not recover the IMEI (it is better that after restoring the device you go to a support center to have them Installed).
STEP 1: download the file ZIP
Download Not Complete Solution.zip
drive.google.com
You must download the ZIP file, it contains all the files to be able to restore the phone (WARNING: DO NOT ATTEMPT TO DOWNLOAD FILES FROM OTHER SITES, YOU MAY END UP DAMAGING THE DEVICE)
Step 2: you must unzip the file
Step 3: open the "ByPASS" folder and open the "Lib USB" installer and install it.
Step 4: open the executable "mtk_bypass_rev4" and when it is open press the "BYPASS" button.
Step 5: now turn off the device (wait for the countdown to end) and hold down the volume + and volume - buttons while the bypass waits for it to recognize the device i.e. by holding them down you connect it to the pc, otherwise it will not go into "BROM" mode (but if it fails to connect you should open the "Lib_USB" application and when you apply these steps you should hit the "Mediatek USB Port" option and hit "install device").
Step 6: after bypassing the device you should open the "SP Flash Tool" folder.
Step 7: now in the "Download Agent" box select the "Choose" option and select the file "DA_6765_6785_6768_6873_6885_6853.bin".
Step 8: now in the "Scatter -Loading File" box select "Format all + Download scatter".
PLEASE NOTE: the phone must be in BROM mode and connected to the PC and make sure that the "Oppo custom" partition is selected and you have not moved it to another place.
Final step: you must change the "Download only" option to "Format all downloads" and press the download button.
If everything went well in the loading bar will start to load the system to the phone and you should wait 10 minutes or more (depends on the speed of the pc) after the process is finished a window with an arrow will appear.
Disconnect the device and turn it on with volume + and the power button.
NVRAM AND NVDATA
EYE IF YOU DON'T HAVE A COPY OF YOUR NVDATA AND NVRAM OF YOUR DEVICE SKIP THIS PART AND GO TO A SERVICE CENTER TO RESTORE YOUR IMEI.
If you have a backup of these files, you must open in the unzipped file the folder "NVRAM Scatter" and open SP Flash Tool.
Step 1: in the "Scatter loading file" part select the "Nvdata Nvram Scatter" file (it is located in the "nvram scatter" folder).
Step 2: after selecting it, you should scroll down and select the Nvram and Nvdata partition and then select its partition file.
Step 3: select the "preloader" partition and this will open a window and in it you should go to the "RMX2020 Stock ROM" folder and select the "preloader_oppo6769" file.
Step 4: now open the "MTK bypass" and you should put the phone in "BROM" mode (remember to turn off the phone and hold volume+ and volume- and connect the phone to the pc without releasing the buttons i.e. holding down you connect it to the pc, otherwise it will not go into "BROM" mode).
will oppo_custom.img file work in my rmx 2117 device ?
It depends, since each model has different writings, and that could terribly affect your device, you should search for your model on the web or look for a dump file of your model, oppo will appear there Oppo custom and you will have to copy and paste it, and don't even think about taking an external NVRAM OR NVDATA file because that will damage your WiFi connectivity, but it is fixed by formatting
Related
How To Flash MIUI on Bricked Xiaomi MI3, MI4
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Steps:-
1.Download and install Mi Flash Tool on your PC from HERE.
2.Download the full Fastboot Miui Rom for Mi 3 or Mi 4 From HERE and save the file on your desktop.
3. Extract the ROM File on your C:/ Drive (Don’t extract the folder on your desktop)
4.Run MI flash tool on your desktop, the same file that you downloaded in the above step.
5.From the tool click on the ‘Browse’ button and select the image folder of the ROM file that you extracted on the C:/ drive.
6.Click on ‘Browse’ option again and Advance and Choose the “Fastboot script” from the extracted ROM folder.
Choose the script carefully as per your need:-
1.flash_all.bat: clears all the data of the built-in storage, clear all user data, please be careful!
2.flash_all_except_storage.bat:
will erase all user data does not clear the built-in storage data.
3.flash_all_except_data_storage.bat:
does not clear the built-in storage data does not clear user data
(I would recommended using the flash_all_except_storage.bat since this will wipe and flash everything but the virtual sdcard.)
7. After this, Turn off the phone, press the Volume down key and the Power button at the same time to enter Fastboot mode, then connect the phone to your pc.
8. Now click on the ‘Refresh’ button and you will see the device on the tool list.
9. Once the device is connected, Click on the ‘Flash’ button and now the flashing process will start on your phone. Wait until the progress bar on MiFlash is green, which means the ROM is successfully flashed, and the phone will automatically boot.
Devil Rocky said:
How To Flash MIUI on Bricked Xiaomi MI3, MI4
Steps:-
1.Download and install Mi Flash Tool on your PC from HERE.
2.Download the full Fastboot Miui Rom for Mi 3 or Mi 4 From HERE and save the file on your desktop.
3. Extract the ROM File on your C:/ Drive (Don’t extract the folder on your desktop)
4.Run MI flash tool on your desktop, the same file that you downloaded in the above step.
View attachment 3399108
5.From the tool click on the ‘Browse’ button and select the image folder of the ROM file that you extracted on the C:/ drive.
View attachment 3399110
6.Click on ‘Browse’ option again and Advance and Choose the “Fastboot script” from the extracted ROM folder.
View attachment 3399107
Choose the script carefully as per your need:-
1.flash_all.bat: clears all the data of the built-in storage, clear all user data, please be careful!
2.flash_all_except_storage.bat:
will erase all user data does not clear the built-in storage data.
3.flash_all_except_data_storage.bat:
does not clear the built-in storage data does not clear user data
(I would recommended using the flash_all_except_storage.bat since this will wipe and flash everything but the virtual sdcard.)
7. After this, Turn off the phone, press the Volume down key and the Power button at the same time to enter Fastboot mode, then connect the phone to your pc.
8. Now click on the ‘Refresh’ button and you will see the device on the tool list.
View attachment 3399106
9. Once the device is connected, Click on the ‘Flash’ button and now the flashing process will start on your phone. Wait until the progress bar on MiFlash is green, which means the ROM is successfully flashed, and the phone will automatically boot.
View attachment 3399109
Click to expand...
Click to collapse
Your method is not working... see pictures attached, any other ideas??
Currently i installed Kingroot in slimbit LP rom but after see people suggest method i uninstalled it & follow him tap root access in devolopment section & reboot but still not get Root access Than i try go in TWRP restore back this rom my phone stuck+ bootloop & keep loading in MI logo only !!! Pls help HELP HELP !! What should i do... i try fastboot flash fastboot rom failed too HELP HELP HELP !!!
Not going to send to phone center & currently my ROM can't not boot because of extend partition before & not stock partition... Help me PLEASE !!!
I have hard-bricked my Nexus 4 while flashing Optimus G Kitkat KDZ file. I could not get into download mode, fastboot, and it had no signs of life but Qualcomm HS-USB driver. I have successfully restored it to download mode, which allows to flash stock ROM via instruction at Here.
LG BoardDiag looks like this:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
However, since there is no Nexus 4 on this list, I have chose G (APQ8064), as Optimus G uses same AP and it is almost identical to Nexus 4.
You need to download tot file for Nexus 4 from this post:
http://forum.xda-developers.com/nexus-4/general/stock-stock-roms-collection-ca-eu-au-t1976057
Click the link saying LGE960AT-00-V10c-NXS-XX-NOV-14-2012-JVP15L-FACTORY_0.
If you already have a .tot file, we need to extract important files including bootloader and partition table within tot file.
1. Rename tot file extension to bin (*.tot to *.bin). Renaming will make this file also usable for LGNPST, which you can use to flash Nexus 4 stock ROM.
2. On the Image Extraction section of BoardDiag, click 3 dot button on BIN, then choose Nexus 4 firmware image renamed at step 1.
3. Click 3 dot button on DIR, and make a folder "N4" on any familiar directory.
4. Click "Extract" Button.
5. On Target DIR section of the BoardDiag, choose "N4" folder you have created at step 3.
6. Go to Device Manager and find COM port number of HS-USB QDloader (In my case, it was COM13, but in case COM port of your Nexus 4 is different, you need to choose right COM Port.)
7. On BoardDiag, at COM Port section, choose COM Port that you have seen on Device Manager at step 6 (If HS-USB QDloader showed COM13, you may select COM13, otherwise, choose right COM Port that you have found on Device Manager.)
8. Tick AP check, then click start.
9. Tick EMMC Test, then click start after AP check is done.
10. Tick SDRAM Test, then click start after EMMC Test is done. Wait until your device shows "Download Mode" screen.
11. Download Automated LGNPST on This Post. and install LGNPST.
12. Flash Nexus 4 stock ROM (bin file used at step 2) with LGNPST. However, after you flash stock ROM via LGNPST and finish first boot, it will show "type password to decrypt storage". Don't panic and flash factory image from google (I recommend 4.2.2) on fastboot mode (Vol up + down + Power without power/usb cable connected. If vol up+down are pressed while usb / power cable is connected, it will boot up to download mode.)
13. For storage issue (16GB model showing 8GB of storage), follow the instruction at http://forum.xda-developers.com/nexus-4/general/tutorial-how-to-unbrick-n4-t2347060 .
Credits
kryptonite for providing LG BoardDiag and instructions how to use BoardDiag
Gigadroid for providing instruction how to use LGNPST and solve storage issues.
How to revert back to Kitkat from MIUI lollipop in easiest way
Requirements :
MIUI 7.1 KK Rom
MiFlash
Important :
Before flashing it is advised to take the backup of data and make sure that your phone battery is charged enough.
Steps :
1. Download ROM from the above link and extract it to Desktop.
Note: - Some users get error while extracting onDesktop Because there is space in the username of PC or the folder as shown.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
The users should put the ROM In C Drive in a folder without spaces. E,g C:/ROM/MIUI
The Error shown when using space between foldername.
2. Download flashing tool from the above link and install it.
3. Once installation is complete, Run MiFlash application.
4. Click on browse
5. Select ROM folder from Desktop(From the location where ROM is saved)
Note: -The path of the ROM folder Should be like "C:\Users\zeus\Desktop\MIUI" Not "C:\Users\zeus\Desktop\MIUI\images"
The MIUI Rom folder should Contain the following files
6. Turn off the phone, press and hold the Volume Down key and the Power button at the same time to enter Fastboot mode, then connect the phone to a computer.
7. Press Refresh button to see you device in flashing tool.
After pressing refresh button you will see connected device.
Here You have 3 options to select.
Choose the options carefully as per your need:-
1. Flash_all:- Clears all the data of the built-in storage, clear all user data, please be careful!(Clean Install)
2. Flash_all_except_storaget:- Will erase all user data does not clear the built-in storage data.
3. Flash_all_except_data_storage:- Does not clear the built-in storage data does not clear user data
8. Click on Flash and it will start process
Device Mismatch error ? Don't worry, click below.
Steps :
1. Dowload Notepad++ from here. Go to folder where you have extracted the Rom
2 .Right Click on any of 3 Batch Files ( .bat extension) you want to choose and open it with Notepad++
3. Delete those 2 lines ( line no. 10 and 11 ) and then Save it using ctrl+s or file menu.
4. Done , now you can flash fastboot rom on your device using Mi flash tool without having that error
9. Once flashing process completes Device will automatically reboot. Reboot might take upto 5 minutes.
Done !
its working 100% thanks for ur guide
Hey guys, If your Realme C3 is in a bootloop. (Restarting again and again without going to the home screen) or if you want to rollback to your Stock ROM, This solution may help you.
Many of us tried to root our device, flash the new Realme UI 2.0 manually and make many other modifications to our device, So it may Softbrick or most usually go to a bootloop. And in this state the nearby Service Centers are also not open for the pandemic. But do not worry because, by following the steps in this post, you can fix your device bootloop at home. So without wasting anymore time, let's start.
So at first, you need to download 5 things. You need a PC or Laptop and a USB Cable.
So you need to download:
1. Realme C3 Flash File (Stock ROM)
(RMX2020) https://bit.ly/3xugV1g
(RMX2027) https://bit.ly/3AlfZ1j
2. SP Flash Tool
https://bit.ly/37kYzp7
3. MCT MTK Auth Bypass Rev4
11.98 MB file on MEGA
bit.ly
Password: www.anonyshu.com
4. MCT OFP Extractor
mct ofp extractor.rar | by TUSER HP for Generic Device/Other
Download GApps, Roms, Kernels, Themes, Firmware, and more. Free file hosting for all Android developers.
bit.ly
5. Mediatek Drivers Auto Installer
https://bit.ly/2VCa5tl
After You install all of these files, follow my steps.
1. Extract the Mediatek Drivers Auto Installer .zip file and open it after that double click on the "Install Drivers .bat" file after that it will open a window, then press any key in the keyboard to install the drivers, after the installation is complete, it will ask you to restart the computer then just click on restart and your PC or Laptop will restart. Voila the drivers are installed.
2. After the drivers are installed already Extract your Realme C3 Flash File. Now it's time to use the MCT OFP Extractor, Extract that file and then install the MCT OFP Extractor .exe
Then open it.
After opening it, In the Top Left You will see "Choose Oppo/Realme OFP File" text, just at it's right side you will see Three Dots Button (...) Click on it, then open the Extracted File
(The Flash File's Folder) and the you will see a file named OFP select it and click on ok/select.
Then right down the "Choose Oppo/Realme OFP File" you will see another text "Choose Output Directory to Extract" again at it's right side you will see a button with Three Dots (...) Click on it, then select the same folder again
(The Flash File's Folder) but don't open it this time just select it. And the click on Ok/Select. Then at the down side you will see a EXTRACT Button click on it, it will start extracting. After the extracting is completed, minimize the window.
3. Extract the MCT MTK Auth Bypass Rev4 .zip File and install the MCT MTK Auth Bypass Rev4 .exe and then Open it. Then click on Bypass button. Now you need your Device and USB Cable. If your phone is in a bootloop, Hold the Power button for 15-20 seconds until it powers off completely.
Warning (Don't let the battery drain)
Then connect the USB cable to your laptop and then Press And Hold you Volume+ and Volume- button and connect the usb cable to your phone immediately And then look at your laptop or PC and if a Successful message appears
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Then you can release your Volume+ and Volume- button. And then minimize the window.
4. Now extract SP Flash Tool .zip file
Open it and open flash Tool .exe then click on choose scatter file and then open the Realme C3 flash File Folder and select the scatter file and the click on ok/select and then click on Download and then when you get the Successful tab, unplug your device and Hold the power button to power on then you will go to the stock recovery, tap on Wipe Data and then tap on factory reset.
Then Reboot. Congratulations you have done it you have fixed your phone on your own.
do i need to download the full stock rom or only the scatter file if only the scatter file please upload it here
Nayantheslayer said:
do i need to download the full stock rom or only the scatter file if only the scatter file please upload it here
Click to expand...
Click to collapse
you need full stock firmware
It's not worked in my case. But, (https://forum.xda-developers.com/t/realme-3-recover-from-soft-brick-boot-loop-guide.3920401/) this method worked in my case so if you face the same problem or the method not working try this. Hopefully it can help you to fix the problem.
The device that I used: realme C3 (Bangladeshi version or global version or narzo 10a in India).
Good day!
The number 3. tool seems not to work on my end,
I did have the DLL error so I downloaded it,
but after downloading it I got this error.
***Mod Announcement: Thread has been locked and download links removed due to XDA GPL violations.***
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I would like to thank TeamWin for their amazing work!
I saw that the newer Samsung MediaTek phones were not getting any sort of love, so I bought one myself to kick start the development.
TWRP is the obvious choice as it is reliable and trustworthy with frequent updates and patches.
INSTALLATION:
Odin Method (Windows):
Step 0: Unlock Device Bootloader by toggling the OEM Unlock option in Developer Options. Device will reboot to Odin mode and will prompt you to long press volume up, device will then unlock bootloader and perform a complete factory reset so make sure to backup any data.
Step 1: Download the unofficial TWRP image from the link attached below.
Step 2: Put the device in Odin download mode by holding VolumeUp+VolumeDown and inserting USB cable after the device is completely shut down.
Step 3: Select the downloaded recovery.tar in AP slot and vbmeta_disabled_R.tar in USERDATA slot, connect the device to PC, go to options and untick "Auto-Reboot"
Step 4: Click START and the Device will get flashed, Odin will say SUCESS!.
Step 5. Exit Download mode by holding VolumeDown+PowerButton and then immediately boot
into Recovery mode by pressing VolumeUp+PowerButton.
Step 6: Congratulations, you have installed TWRP latest for your M32 4G, to access the system now, you need to perform some additional steps.
Step 7: Open up TWRP terminal and then type in "multidisabler" and then perform a full factory reset again by going into "Wipe" -> Format Data -> type "yes"
Step 8: Now stock ROM should work fine with TWRP!
Heimdall Method (Linux):
Step 1: Install heimdall tool on linux , google it.
Step 2: Put the device in Odin download mode by holding VolumeUp+VolumeDown and inserting USB cable after the device is completely shut down.
Step 3: Open up terminal in the downloaded TWRP directory, extract twrp image from recovery.tar
Step 4: Enter the command "heimdall flash --RECOVERY recovery.img --no-reboot" where twrp.img is name of the downloaded image
Step 5. Exit Download mode by holding VolumeDown+PowerButton and then immediately boot
into Recovery mode by pressing VolumeUp+PowerButton.
Step 6: Congratulations, you have installed TWRP latest for your M32 4G, to access the system now, you need to perform some additional steps.
Step 7: Open up TWRP terminal and then type in "multidisabler" and then perform a full factory reset again by going into "Wipe" -> Format Data -> type "yes"
Step 8: Now stock ROM should work fine with TWRP!
COMPATIBILITY:
TWRP Recovery is compatible with latest Android 11-12 firmware
tested on:
M325FXXU3AUK1, M325FXXU4AVB1 ,M325FXXU4BVI2 as well
First time you boot into TWRP, don't forget to backup your EFS, Secondary EFS and NVRAM! Go into Backup and select "EFS,", "Secondary EFS" and "NVRAM" and backup to preferably MicroSDcard and copy it to your PC in case you need it if IMEI corrupts.
DON'T IGNORE THIS STEP!
DOWNLOADS:
VBMETA DISABLED FOR R: ***Link Removed***
TWRP TAR: ***Link Removed***
by [email protected] #PruhBootlooper
@cha0scl0wn