Database Develop

Lm405ua crosflash without wipe all

Hi how can i upgrade from vesion 30c to 30d firmware EBW, without full wipe. I have lm405ua version

eran.langa said:
Hi how can i upgrade from vesion 30c to 30d firmware EBW, without full wipe. I have lm405ua version
Click to expand...
Click to collapse
You're on 30c of what? ebw? sprint? at&t?

AsItLies said:
You're on 30c of what? ebw? sprint? at&t?
Click to expand...
Click to collapse
V405EBW30d_00_OPEN_EU_DS_OP_1223.kdz
Its a European firmware
The phone is us cellular version.

eran.langa said:
V405EBW30d_00_OPEN_EU_DS_OP_1223.kdz
Its a European firmware
The phone is us cellular version.
Click to expand...
Click to collapse
that's what u want to upgrade to, what are u upgrading from?

AsItLies said:
that's what u want to upgrade to, what are u upgrading from?
Click to expand...
Click to collapse
V405EBW30c_00_OPEN_EU_DS_OP_1006.kdz
My question is if there an option to do the upgrade without wipe the phone?

eran.langa said:
V405EBW30c_00_OPEN_EU_DS_OP_1006.kdz
My question is if there an option to do the upgrade without wipe the phone?
Click to expand...
Click to collapse
yes I read the question before, the answer depends on what you're on and what u want to go to. If it's the same variant, u should be able to do 'upgrade' option in lgup. If it's anything else, it's a 'cross flash' and you'll have to wipe data.

AsItLies said:
yes I read the question before, the answer depends on what you're on and what u want to go to. If it's the same variant, u should be able to do 'upgrade' option in lgup. If it's anything else, it's a 'cross flash' and you'll have to wipe data.
Click to expand...
Click to collapse
Last time i tried to upgrade. Lgup 1.16 didn't let me to upgrade.
Just lgup 1.15 version that doing a wipe data.

eran.langa said:
Last time i tried to upgrade. Lgup 1.16 didn't let me to upgrade.
Just lgup 1.15 version that doing a wipe data.
Click to expand...
Click to collapse
Well the purpose of the 'upgrade' option is to do essentially what an ota would do, keep yer data and do the update in the inactive slot, make it active, reboot.
If u get an error search on it or ask specifically about it.

AsItLies said:
Well the purpose of the 'upgrade' option is to do essentially what an ota would do, keep yer data and do the update in the inactive slot, make it active, reboot.
If u get an error search on it or ask specifically about it.
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Solved.
just put "LGUP_Common.dll" of lgup1.17 to the "C:\Program Files (x86)\LG Electronics\LGUP\model\Common" directory.

eran.langa said:
View attachment 5216065
Solved.
just put "LGUP_Common.dll" of lgup1.17 to the "C:\Program Files (x86)\LG Electronics\LGUP\model\Common" directory.
Click to expand...
Click to collapse
Good, didn't realize there was a new 1.17 version available. You might want to edit that pic and remove your imei number btw.

Stock in a soft brick

Hello everone, recently i tried to flash my tencent rog phone 3 to ww, however i accidently flashed the latest ww file, now the phone wont come out of the loop and i ve tried flashing it with another cn flash but it doesnt work, i can only go through the recovery menu bootloader etc, any help will be highly appreciated
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

what firmware did you sew?

kpykpy said:
what firmware did you sew?
Click to expand...
Click to collapse
Latest WW

Kitsune6 said:
Latest WW
Click to expand...
Click to collapse
raw?

kpykpy said:
raw?
Click to expand...
Click to collapse
Yes, i used the bat file and it said this (image) after 10 min the log kept running, phone booted 2 times and it never booted to the os

cn raw not flashed?

kpykpy said:
Im sorry i dont understand what you mean by that
Click to expand...
Click to collapse

[UNBRICK/RAW] Revive your bricked ASUS ROG Phone 3 [23-NOV-2021]
Unbrick your ASUS ROG Phone 3 for free!! Don't pay for this stuff anywhere, it's your device and you deserve the right to fix it yourself. I noticed some people in the community charging upto 50$ for the firmware which should've been free from...
forum.xda-developers.com
try 17.0823.2009.99/100 CN

kpykpy said:
[UNBRICK/RAW] Revive your bricked ASUS ROG Phone 3 [23-NOV-2021]
Unbrick your ASUS ROG Phone 3 for free!! Don't pay for this stuff anywhere, it's your device and you deserve the right to fix it yourself. I noticed some people in the community charging upto 50$ for the firmware which should've been free from...
forum.xda-developers.com
try 17.0823.2009.99/100 CN
Click to expand...
Click to collapse
okay ill try it now,but every time the device restarts i get a message saying that the device is unlocked,i go to recovery mode and it says this
Android recovery
asus/CN_I003D/ASUS_I003_1
10/QKQ1.200419.002/17.0823.2012.132-0
user/release-keys
use volume up/down and power
i cannavigate through the menu in fastboot too
Android fastboot
Productname -ASUS_I003_1
Bootloader version unknown
Baseband version-
Serialnumber
secureboot-yes
HW version -0

Kitsune6 said:
10/QKQ1.200419.002/17.0823.2012.132-0
Click to expand...
Click to collapse
in 1st post 143 fw
i say try 99/100 cn
and now you say flashed 132 fw =/

kpykpy said:
in 1st post 143 fw
i say try 99/100 cn
and now you say flashed 132 fw =/
Click to expand...
Click to collapse
it changed because i try flashing a cn rom as the instructions said on step 3 i went with the stock cn file

Kitsune6 said:
it changed because i try flashing a cn rom as the instructions said on step 3 i went with the stock cn file
Click to expand...
Click to collapse
where this instructions

kpykpy said:
where this instructions
Click to expand...
Click to collapse
3] Once it's in bootloader flash any of the RAW firmware linked above depending on the device that you have, if its Tencent then flash CN, for global it's WW.
- Extract the RAW firmware and run the file zs661ks_raw_flashall.bat , have some patience and do not disconnect the device as this will take some time. please let me know if i did something wrong

Kitsune6 said:
3] Once it's in bootloader flash any of the RAW firmware linked above depending on the device that you have, if its Tencent then flash CN, for global it's WW.
- Extract the RAW firmware and run the file zs661ks_raw_flashall.bat , have some patience and do not disconnect the device as this will take some time. please let me know if i did something wrong
Click to expand...
Click to collapse
why you flash 132 fw???
try raw 99/100 cn
and if everything is good then try raw 143 ww

Same result with the suggested fw, after this it stays loading for about 10 minutes then the phone restarts, unlocked warning appears and it goes back to bootmode

helped removing avg antivirus!

Question Power Button showning chinese messsage

Guys, when I hold the power button to turn off or restart, this message appears in chinese. Is there any way to get this out?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Have you tried factory reset?

MrHopeless said:
Have you tried factory reset?
Click to expand...
Click to collapse
no because setting everything up again is a lot of work. But if there is no way, I will have to reset.

brunolongo said:
no because setting everything up again is a lot of work. But if there is no way, I will have to reset.
Click to expand...
Click to collapse
Has it been there since the day you got your phone? If so, then that's something to do with the ROM.

MrHopeless said:
Has it been there since the day you got your phone? If so, then that's something to do with the ROM.
Click to expand...
Click to collapse
yes, i bought it two days ago. My ROM is Chinese and yours?

brunolongo said:
yes, i bought it two days ago. My ROM is Chinese and yours?
Click to expand...
Click to collapse
Global, but I flashed custom rom in it and it's running fine.

MrHopeless said:
Global, but I flashed custom rom in it and it's running fine.
Click to expand...
Click to collapse

MrHopeless said:
Global, but I flashed custom rom in it and it's running fine.
Click to expand...
Click to collapse
La versión china no acepta Rom ,

brunolongo said:
La versión china no acepta Rom ,
Click to expand...
Click to collapse
Do you not see the "OEM unlock" feature from developer options?

MrHopeless said:
Do you not see the "OEM unlock" feature from developer options?
Click to expand...
Click to collapse
Sorry. Whats is OEM unlock?

brunolongo said:
Sorry. Whats is OEM unlock?
Click to expand...
Click to collapse
You can find it by going to developer options. You need to enable it to unlock the bootloader. and an unlocked bootloader is needed to flash a custom ROM (in my case).

Also, instructions may wary because of different brands.

This is the voice assistant Breeno, there should be a way to turn off summoning it by holding power key somewhere in Settings.
@MrHopeless How did you even unlock yours? AFAIK X3/P isn't open for Deep Testing.

MrHopeless said:
You can find it by going to developer options. You need to enable it to unlock the bootloader. and an unlocked bootloader is needed to flash a custom ROM (in my case).
Click to expand...
Click to collapse
here in this version there is ,

AndyYan said:
This is the voice assistant Breeno, there should be a way to turn off summoning it by holding power key somewhere in Settings.
@MrHopeless How did you even unlock yours? AFAIK X3/P isn't open for Deep Testing.
Click to expand...
Click to collapse
Man Thank you very much. I achieved.

General REDMI NOTE 10 PRO GLOBAL 12.5.8 STABLE UPDATE (SEPTEMBER)

Hi guys!
MIUI 12.5.8 RKFMIXM is now rolling out in global variants!
Region: Set to India
Update settings: Receive updates early
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

akuumaaa said:
Hi guys!
MIUI 12.5.8 RKFMIXM is now rolling out in global variants!
Region: Set to India
Update settings: Receive updates early
View attachment 5415963
Click to expand...
Click to collapse
Changelog:

I'm still on 12.5.4 and says no update available even though I tried to switch the region and a restart.

Raito Wolf said:
I'm still on 12.5.4 and says no update available even though I tried to switch the region and a restart.
Click to expand...
Click to collapse
What variant of redmi note 10 pro do you use? If it's global, try to change your update setting to "receive updates early" then try to change your region into Philippines and keep pressing the check for updates button until the update pops out.

akuumaaa said:
What variant of redmi note 10 pro do you use? If it's global, try to change your update setting to "receive updates early" then try to change your region into Philippines and keep pressing the check for updates button until the update pops out.
Click to expand...
Click to collapse
It's the Global Version and I already tried that. Seems like there are a ton of problems with this phone in my case .

In that case, You should factory reset your phone
Raito Wolf said:
It's the Global Version and I already tried that. Seems like there are a ton of problems with this phone in my case .
Click to expand...
Click to collapse

Raito Wolf said:
It's the Global Version and I already tried that. Seems like there are a ton of problems with this phone in my case .
Click to expand...
Click to collapse
There isn't any problems, just because it works for OP it doesn't mean every global variant will get it. You can always get Xiomi.eu if you want a later release. Its practically the same with some slight modifications/ debloat. You could also just get the firmware yourself and flash it.

Yep, right! you can just manually download the official firmware and apply manually the update for your device though

patrickfenn said:
There isn't any problems, just because it works for OP it doesn't mean every global variant will get it. You can always get Xiomi.eu if you want a later release. Its practically the same with some slight modifications/ debloat. You could also just get the firmware yourself and flash it.
Click to expand...
Click to collapse
There are users like us who don't want to compromise their device safety, spend time in flashing/troubleshooting and to lose some important features via unlocking the device bootloader like making some of the banking apps useless, etc. Yes, Xiaomi EU is good! But clearly that custom rom is not for everyone.

akuumaaa said:
In that case, You should factory reset your phone
Click to expand...
Click to collapse
Already did that.
patrickfenn said:
There isn't any problems, just because it works for OP it doesn't mean every global variant will get it. You can always get Xiomi.eu if you want a later release. Its practically the same with some slight modifications/ debloat. You could also just get the firmware yourself and flash it.
Click to expand...
Click to collapse
Didn't want to mess with flashing it. I don't think it's okay to be this far behind with July update when some get the September update... Was hoping for some battery improvements.
akuumaaa said:
Yep, right! you can just manually download the official firmware and apply manually the update for your device though
Click to expand...
Click to collapse
Already tried that. I doenloaded 12.5.6 and says "can't downgrade ROM version". Not sure how 12.5.6 is lower than 12.5.4.
akuumaaa said:
There's users like us who don't want to compromise their device safety, have some hassle and losing some features via unlocking bootloader like making some of the banking apps useless, etc. Yes, Xiaomi EU is good! But clearly this custom rom is not for everyone.
Click to expand...
Click to collapse
Yup.

akuumaaa said:
Journal des modifications :
Click to expand...
Click to collapse
Hello, what is the "New fingerprints options" novelty?

Question Mi Pilot waiting time ?

Just curious how much time it took for you to get accepted. The more posts the better averages I guess.

Still not accepted after 2 weeks

NeoDJW said:
Still not accepted after 2 weeks
Click to expand...
Click to collapse
Mi Pilot seems to be somewhat obsolete since Xiaomi has been updating with stable Beta on the stable channel for a few years, moreover, some have had the Miui 14 without being part of the program.
https://forum.xda-developers.com/t/...14-0-3-any-good-opinion.4542647/post-88011203

NeoDJW said:
Still not accepted after 2 weeks
Click to expand...
Click to collapse
Aww, that sucks

NOSS8 said:
Mi Pilot seems to be somewhat obsolete since Xiaomi has been updating with stable Beta on the stable channel for a few years, moreover, some have had the Miui 14 without being part of the program.
https://forum.xda-developers.com/t/...14-0-3-any-good-opinion.4542647/post-88011203
Click to expand...
Click to collapse
Hmm, I'm on EEA and I didn't get it. Is it region/IP or carrier based or something ?

case81 said:
Hmm, I'm on EEA and I didn't get it. Is it region/IP or carrier based or something ?
Click to expand...
Click to collapse
Mystery of Xiaomi, try to change region and/or continent and restart.
These releases are not supposed to come through the stable channel.
Note that these are Beta roms and if the bootloader is locked in the event of a bootloop, you will have to pay to recover your phone.

I just changed region to Monaco, rebooted device, update notification came 14.0.3 , updated, just installed twrp and magisk

NeoDJW said:
I just changed region to Monaco, rebooted device, update notification came 14.0.3 , updated, just installed twrp and magisk
Click to expand...
Click to collapse
Wait, how. ?

Did you use a Monaco phone number or something like that ? Or just a region change from Additional Options ?

case81 said:
Did you use a Monaco phone number or something like that ? Or just a region change from Additional Options ?
Click to expand...
Click to collapse
just change region/continent.

@Neo
NOSS8 said:
just change region/continent.
Click to expand...
Click to collapse
Am on Monaco right now. Not working

case81 said:
@Neo
Am on Monaco right now. Not working
Click to expand...
Click to collapse
Try other regions and restart each time.

NOSS8 said:
Try other regions and restart each time.
Click to expand...
Click to collapse
Just region change then restart ? No clearing cache or something?

NeoDJW said:
I just changed region to Monaco, rebooted device, update notification came 14.0.3 , updated, just installed twrp and magisk
Click to expand...
Click to collapse
Was it instantaneous btw ?

NOSS8 said:
Try other regions and restart each time.
Click to expand...
Click to collapse
Okay, I tried all the continents. Then a lot of small countries in Europe. And nope, nothing

One fun thing I found: when you choose an EU country or extensions of the EU, there are no ads. But once you go outside the EU, oh boi. It all starts

case81 said:
Okay, I tried all the continents. Then a lot of small countries in Europe. And nope, nothing
Click to expand...
Click to collapse
Go to the updater and tap several times in the middle, a new menu should appear then try again.

NOSS8 said:
Go to the updater and tap several times in the middle, a new menu should appear then try again.
Click to expand...
Click to collapse
Click anything in that menu or just check for update every time ?

Tried 20 different regions, still no update . I guess it is what it is

case81 said:
Click anything in that menu or just check for update every time ?
Click to expand...
Click to collapse
Tap several times in the middle
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}