If you have flashed any Roms based on sathosh's sir's trees I.e unofficial RR,Aicp,Aokp and cm. Your bootloaders have been updated to mm bootloaders which are based on a leaked build. This bootloader is not officially supported by cm trees, thus if you flash a ROM when you are in this bootloader that is based on official cm trees,then you will get bugs like settings and security FC.
How do I fix this?
The fix is simple. Backup all your stuff.
1) If you have unlocked officially.
Then flash a miui recovery rom. Boot into fastboot, open mi unlock and unlock your bootloader.
2)If you have unlocked unofficially
Then flash via fastboot with patched emmc appsboot file. And type fastboot OEM unlock-go .
Do this if some bugs persist then post on the respective ROMs thread.
You will never walk alone
Keep it brah
Much needed guide. Thanks
Sent from my kenzo using Tapatalk
Thanks Mate
I hope users will read these instructions Before flashing
Sent from my Redmi Note 3 using Tapatalk
Tell me if i am wrong
I am officially unlocked
Flashed unofficial rrremix 8th june build afterwards unlocked bootloader via mi unlock tool
Yesterday made a full wipe flashed unofficial rr remix 20th june built which i guess is based on custom cm sources as after flashing i checked if the bootloader was locked thru adb and it wasnt but i did not have any app fcs or any problems with the rom
Conclusion if i am right with my statement
If u r unlocked officially flash any rom based on miui sources after flashing unlock bootloader again if ur bootloader is locked
Then u can flash any rom with cm13 based kernel without flashing miui rom
Correct me if i am wrong
I have done it and the latest unofficial rr build built on 20th june is based on cm13 sources not on miui sources
My way will work only if u r officially unlocked
ashwaa said:
Tell me if i am wrong
I am officially unlocked
Flashed unofficial rrremix 8th june build afterwards unlocked bootloader via mi unlock tool
Yesterday made a full wipe flashed unofficial rr remix 20th june built which i guess is based on custom cm sources as after flashing i checked if the bootloader was locked thru adb and it wasnt but i did not have any app fcs or any problems with the rom
Conclusion if i am right with my statement
If u r unlocked officially flash any rom based on miui sources after flashing unlock bootloader again if ur bootloader is locked
Then u can flash any rom with cm13 based kernel without flashing miui rom
Correct me if i am wrong
I have done it and the latest unofficial rr build built on 20th june is based on cm13 sources not on miui sources
My way will work only if u r officially unlocked
Click to expand...
Click to collapse
If you have unlocked your bootloader officially , when you install cm13 roms with locked bootloader you can directly unlock them using Mi-unlock tool . But if you have unlocked your bootloader unofficially and after installing a rom if your bootloader is locked then, you would have to flash miui rom via MiFlash tool then unlock the bootloader using that rom(so you will loose your cm13 rom).
Manoj Rocker said:
If you have unlocked your bootloader officially , when you install cm13 roms with locked bootloader you can directly unlock them using Mi-unlock tool . But if you have unlocked your bootloader unofficially and after installing a rom if your bootloader is locked then, you would have to flash miui rom via MiFlash tool then unlock the bootloader using that rom(so you will loose your cm13 rom).
Click to expand...
Click to collapse
Sir i know that
I was only refering to op that if u officislly unlocked and flashed a custom rom with miui resources and want to flash a custom rom with cm13 sources u dont have to flash miui rom again u can only unlock the boot loader on exsisting rom and flash a cm13 sources based custom rom and it will run bugless
:good:
ashwaa said:
Sir i know that
I was only refering to op that if u officislly unlocked and flashed a custom rom with miui resources and want to flash a custom rom with cm13 sources u dont have to flash miui rom again u can only unlock the boot loader on exsisting rom and flash a cm13 sources based custom rom and it will run bugless
Click to expand...
Click to collapse
Even Santhosh's CM can be unlocked via Mi Flash without going back to MIUI ROM.
You people have'nt realized the existence of two bootloaders. Unlocking is diffrent. both bootloaders can be unlocked. But Roms based on official cm trees onlu support the lollipop boot loader and not the bootloader from the leaked build.
simplyme2908 said:
1) If you have unlocked officially.
Then flash a miui recovery rom. Boot into fastboot, open mi unlock and unlock your bootloader.
Click to expand...
Click to collapse
I was on AOSP 5.1, backed up using twrp Alka before flashing Santhosh CM13. Then I wiped and flashed Bliss, wiped and flashed unofficial Resurrection Remix. Can I just flash a Xiaomi.eu ROM through twrp and unlock it through MiUnlock after and that's it?
SkinCoffin said:
I was on AOSP 5.1, backed up using twrp Alka before flashing Santhosh CM13. Then I wiped and flashed Bliss, wiped and flashed unofficial Resurrection Remix. Can I just flash a Xiaomi.eu ROM through twrp and unlock it through MiUnlock after and that's it?
Click to expand...
Click to collapse
Yes , if you had unlocked your bootloader officially in the first place .
Manoj Rocker said:
Yes , if you had unlocked your bootloader officially in the first place .
Click to expand...
Click to collapse
Yes, it's officially unlocked, thanks.
simplyme2908 said:
You people have'nt realized the existence of two bootloaders. Unlocking is diffrent. both bootloaders can be unlocked. But Roms based on official cm trees onlu support the lollipop boot loader and not the bootloader from the leaked build.
Click to expand...
Click to collapse
Man cm based bootloaders need not be unlocked they r originally unlocked only the miui based bootloaders r locked all the latwst roms except i guess by santosh m sir r miui based so u know better only issue is that all latest roms r nightly if u flash updates only do a clean install and when ur rim boots up set up as new device and dont restore frm back up
ashwaa said:
Man cm based bootloaders need not be unlocked they r originally unlocked only the miui based bootloaders r locked all the latwst roms except i guess by santosh m sir r miui based so u know better only issue is that all latest roms r nightly if u flash updates only do a clean install and when ur rim boots up set up as new device and dont restore frm back up
Click to expand...
Click to collapse
Man. Punctuation. Please.
Is the new RR unofficial ROM based on cm source or xiaomi?
OK, so if I am understanding OP correctly, what we need to do is re-unlock our bootloaders and then do a clean install of the rom containing the CM-based bootloader.
No , once you install a ROM for example cm13 by Mr Santosh , then your bootloader will be automatically locked , therefore you need to unlock the bootloader and then install cm based bootloader ROMs for example RR official .
---------- Post added at 05:41 AM ---------- Previous post was at 05:40 AM ----------
filthyrich77 said:
Is the new RR unofficial ROM based on cm source or xiaomi?
Click to expand...
Click to collapse
Cm
Yes. That's what I meant.
If we took a backup using Alka TWRP while our bootloaders were unlocked before flashing a rom based on Santosh's trees, can we just restore that backup and then flash a CM based bootloader ROM?
Currently I am on RR (Unofficial 20th June Build). I unlocked my bootloader officially. Now i am trying to unlock bootloader again with MiUnlocker but it gets stuck at 99% with unknown error. If I want to switch to another rom (based on CM), should I require unlocked bootloader??
Hello,
I saw on the huawei site that p9lite have source code released
http://download-c.huawei.com/downlo...oadId=80203&version=318922&siteCode=worldwide
Hopefully someone makes a good use of it.
Could you tell me how to flash this file ?
mrnikt said:
Could you tell me how to flash this file ?
Click to expand...
Click to collapse
This is not for flashing. That is the kernel source code for this device.
Is just for developers.
They always release the Kernel Sources for their device. but the devs needs also the sources for the Kirin SoC's.
Don't think you will be ever able to build this kernel. Just tested the source and there are a lot of files missing.
I tried to build but already got a error of missing file 'init/mounts.o' that is required to build the kernel.
Yes you can. I did it myself and I'm quite noobish at compiling. I've upgraded the kernel source as well See http://forum.xda-developers.com/p9/development/p9-lite-kernel-source-updated-to-3-10-t3410130 for the kernel updated as image binary, or the updated source at my github. (props to Paul o Brien for instructions)
lzimbrea said:
This is not for flashing. That is the kernel source code for this device.
Is just for developers.
Click to expand...
Click to collapse
Thanx a lot
So what are the chances of seeing a custom ROM with the source for Kirin SoC not released?
And as an aside... any guesses on why it is not released?
Hello, I noticed that the link is no longer available.. do anyone knows why?
I am trying to find it but I found only the chinese DL00 and TL00 version here http://download-c.huawei.com/download/downloadCenter?downloadId=88007&version=344035&siteCode=cn
EDIT: Nevermind, I found it here:
http://download-c1.huawei.com/downl...oadId=87926&version=372546&siteCode=worldwide
*Even if it's Marshmallow
I've seen there are many custom roms for RN9s and RN9 Pro. Why does our RN9 doesn't have? Will there be roms for us someday? Just bought the phone and thought there were roms I can install
I think its up to xiaomi, because ROM's devolopers usually waits for the official kernel source to be uploaded by the manufacturer. This reason might explain why there are plenty of Redmi Note 9 Pro/S ROMs (already with kernel source uploaded) but not even a fully functional TWRP recovery for Redmi Note 9. We might need to wait for xiaomi official kernel source for RN9 to start seeing functional stable ROMS running out.
ma259 said:
I think its up to xiaomi, because ROM's devolopers usually waits for the official kernel source to be uploaded by the manufacturer. This reason might explain why there are plenty of Redmi Note 9 Pro/S ROMs (already with kernel source uploaded) but not even a fully functional TWRP recovery for Redmi Note 9. We might need to wait for xiaomi official kernel source for RN9 to start seeing functional stable ROMS running out.
Click to expand...
Click to collapse
Where does xiaomi release the official kernel source code (which website?)
Evan_Ferrao said:
Where does xiaomi release the official kernel source code (which website?)
Click to expand...
Click to collapse
Here, at official Xiaomi Github channel:
https://github.com/MiCode/Xiaomi_Kernel_OpenSource
Maybe we should wait, RN9 still a new device. And there just an Unofficial TWRP, maybe after the official TWRP got released we will got some custom ROM.
I suggest you to keep on stock rom firmware only.
Root it with magisk. Flash it with twrp.
And everything is fine.
If you want to know what is working for MERLIN, take a look: https://forum.xda-developers.com/t/...omi-redmi-note-9-xiaomi-redmi-10x-4g.4204873/
Do you need help with your MERLIN device ?
Read this FAQ: https://forum.xda-developers.com/t/...for-merlin-redmi-10x-4g-redmi-note-9.4225177/
As described here we have full open source Nokia 5.4 ready to play but with a bad start due to HMD's next-gen bootloader lol
Source code up - Stock ROM up - Time to find root
We got Nokia 5.4 source code and firmware up. I have been looking deep into the source code for any tricks before building it. However we have boot.img now and I think we should get magisk support here. As excepted we have these results: cp...
forum.xda-developers.com