Hello, long time no see.
I need help to Windows Phone can run on Nokia X2 -Ara. Today i tested on Nokia x2 prototype F1 RM1014 1 sim
This work high knowledge user, advance user, not for normal,noob or another guy dont know what they doing, need high knowledge.
Request:
A EDL cable to force X2 go to qcom 9008 dload or anothet mehod to force x2 go to qcom dload 9008
Full android backup of you system,back up via DD command or another tool kit. Full emmc image 3.6gb not backup of system,data,.tcc in twrp. full EMMC Backup via Terminal Android is my choise
Have a lot time to download file,restore file,flash file
And dont blame me if it doesnt boot to system
Need installed Thor2 . understand command of Thor2. Need install windows device recovery tool
XDA:DevDB Information
Firmware Windows Phone 8 on Nokia X2 (Unstable, need more work), ROM for the Nokia X2
Contributors
thinhx2
ROM OS Version: Windows 8 Mobile
ROM Kernel: Windows Kernel 1
Version Information
Status: Alpha
Created 2019-07-11
Last Updated 2019-07-29
Backup full emmc of android by terminal apk:
dd if=/dev/block/mmcblk0 of=/storage/sdcard1/backup.img
Coppy it to pc/laptop to restore android
Flash Emergency payload of Windows phone:
https://protobetatest.com/downloads/ download lumia emergency payload from this site, extract folder rm1071
Use EDL cable to force x2 go to qcom 9008 dload (for my self)
Open Thor2, type:
thor2 -mode emergency -hexfile "path to ede file" -edfile "path to edp file"
Done you will see in Device Manager,it will show lumia usb connectivity
But no display because it just repartition few partition of WP,but dont worry continue to have full partition of wp. Next post
Download this file ~4gb : https://drive.google.com/file/d/1kvJzOCaekZLkPNxGYk_ol0LQGUmuGl0M/view
Continue type command in Thor2 : thor2 -mode uefiflash -imagefile [PATH TO THE DOWNLOADED FILE] -startsector 0
Wait. It take you about 33mins ) . after success. Reboot device. You will got WP8.1 on x2. But have big problem : no display driver
If you flash UEFI from 532/435 you will have display work but after logo windows. Device will reboot,cant go to system. link : https://drive.google.com/file/d/15Gz6IfBPL1LiJcphQbEEVYIqX7uwl1Se/view?usp=sharing
I tried flash FFU and full emmc backup of 435/532 but same result: after logo Windows. Device will reboot
I need help to fix problem
And i think i need try install win rt on it
And x2 only have 4gb rom. Cant install rt
and i only try it on x2 prototype. Not x2 retail. Maybe x2 retail have security fuse. But who know. I just try for fun
dont try if you dont have high knowledge. It really hard. Not easy
It so fun ???
Time to sleep,i will update tomorrow. A great nght to play wp with x2 ))
This work not for normal user. Dont try it if you dont have good knowledge ))
Uefi mass storage mode work fine on x2
some one can help me port display driver?
thinhx2 said:
some one can help me port display driver?
Click to expand...
Click to collapse
can you try copying oempanel.sys and oempanel_etw.dll from 532\MainOS.img\Windows\system32\DRIVERS\ to vela and flashing ??
vatva69 said:
can you try copying oempanel.sys and oempanel_etw.dll from 532\MainOS.img\Windows\system32\DRIVERS\ to vela and flashing ??
Click to expand...
Click to collapse
Problem from Display config of Uefi. Uefi of 532 can enable display of 2 fw
thinhx2 said:
Problem from Display config of Uefi. Uefi of 532 can enable display of 2 fw
Click to expand...
Click to collapse
Ok, can you copy uefi config from 532?
vatva69 said:
can you try copying oempanel.sys and oempanel_etw.dll from 532\MainOS.img\Windows\system32\DRIVERS\ to vela and flashing ??
Click to expand...
Click to collapse
You living in Hanoi? Can tell me you address?. I living at Vinhome riverside
Hi guys, can anyone please upload mmcblk0 image file (mmcblk0.img) for Samsung Galaxy Note 9 (SM-N9600)? My phone died with hard bricked and can't start with error (QUALCOMM HS-USB QDLOADER 9008) I want to restore it, but I can't find another device to generate this file. please make yourself free to upload the file or link.
Hello, everyone
I am trying to collect DM information through Qualcomm diagnostic kit(/dev/diag) on SM-G998U device.
However, in the currently uploaded open source(G998USQU4AUF5), the contents of /dev/diag are deleted.
Is the Diag Interface changed to something else? Or does the latest device not support Diag Interface?
I hope someone can help me out.
Thank you
hello everyone I have redmi 9t miui 12.5.8.0 global tried to copy obb file I downloaded from google to android/obb destination but android 11 doen't allow me to copy, so i install an other file app called (es file explorer) and did the job, after that I used the cleaner that comes with app just to try it after I restart my phone and nothig show up no vibration no recovery to reset it no fastboot . my phone is not unlocked or rooted when I connect it to my pc it shows this in device manager ( Qualcomm HS-USB QDLoader 9008) any can help please and sorry for my bad english
My Chinese version OnePlus 10 pro get into crash dump mode, can't get into bootloader mode. Volume down+up and power button directly leads to crash dump mode. MSM tool requires login and nowhere to get one. Windows device setting shows HS 900 divice.
There's some info displaying? That was caused by some mod or something?
Anyway someone shared the Chinese msmtool, probably you can use it
Xda comment
RokCruz said:
There's some info displaying? That was caused by some mod or something?
Anyway someone shared the Chinese msmtool, probably you can use it
Xda comment
Click to expand...
Click to collapse
just says crash dump mode, no other words. can detect 900E mode.
evanxyj said:
just says crash dump mode, no other words. can detect 900E mode.
Click to expand...
Click to collapse
I just remember that back on my old OP 7 pro when I had a crash dump i take log with QPST software, it automatically reboot into system so you can try it.
Now the process to take the log is this(taken from a telegram group of some old OP7Pro custom ROM)
## CrashDump Logs (Windows Only) ##
Download and Install QPST
Download Archives - QPST Tool
qpsttool.com
Ensure proper OP Drivers
Qualcomm HS_USB
Launch Utility
- Start > QPST > QPST Configuration
Dump Logs
- While on CrashDump screen, plug phone into USB
- Ports tab will display a progress bar and Sahara Memory Dump
Troubleshooting
- During CrashDump screen, Device Manager should list device as Qualcomm HS-USB Diagnostics 900E
- If it does not, right click > Uninstall Device > Delete the driver software for this device
- Reboot and install above driver set
RokCruz said:
I just remember that back on my old OP 7 pro when I had a crash dump i take log with QPST software, it automatically reboot into system so you can try it.
Now the process to take the log is this(taken from a telegram group of some old OP7Pro custom ROM)
## CrashDump Logs (Windows Only) ##
Download and Install QPST
Download Archives - QPST Tool
qpsttool.com
Ensure proper OP Drivers
Qualcomm HS_USB
Launch Utility
- Start > QPST > QPST Configuration
Dump Logs
- While on CrashDump screen, plug phone into USB
- Ports tab will display a progress bar and Sahara Memory Dump
Troubleshooting
- During CrashDump screen, Device Manager should list device as Qualcomm HS-USB Diagnostics 900E
- If it does not, right click > Uninstall Device > Delete the driver software for this device
- Reboot and install above driver set
Click to expand...
Click to collapse
the second i connect the cable, phone restart into crash dump mode, and again. computer detects 900E mode. dont know why it bootloop the crash dump mode upon connect.