Warranties:
THIS GUIDE COMES WITH NO WARRANTY. I AM NOT RESPONSIBLE OF BREAKING YOUR PRECIOUS TABLET.
PLEASE BACKUP YOUR DATA BEFORE CONTINUING, AS THIS GUIDE WILL WIPE YOUR DATA.
Also, this guide assumes you have the following requirements:
Bootloader unlocked
TWRP installed
Installation:
Before proceeding, pick the tablet and go to TWRP.
Do the normal wipes for clean flash.
Copy the zip to sdcard or on the tab wherever you like.
Flash the zip from TWRP.
Reboot and done, enjoy
Problems:
No SELinux support yet
Cameras will NOT work, as we are using a newer 3.4 kernel for Oreo!
You tell
If you like my work, you can donate here
Download:
espresso3g
espressowifi Thanks to @RDS5
Source Code:
GitHub - MightyM17/android_device_samsung_espressowifi-1
Contribute to MightyM17/android_device_samsung_espressowifi-1 development by creating an account on GitHub.
github.com
GitHub - MightyM17/android_device_samsung_espresso3g-1
Contribute to MightyM17/android_device_samsung_espresso3g-1 development by creating an account on GitHub.
github.com
GitHub - MightyM17/android_kernel_ti_omap4
Contribute to MightyM17/android_kernel_ti_omap4 development by creating an account on GitHub.
github.com
GitHub - MightyM17/android_hardware_ti_omap4: For Android Oreo and above
For Android Oreo and above. Contribute to MightyM17/android_hardware_ti_omap4 development by creating an account on GitHub.
github.com
GitHub - Unlegacy-Android/proprietary_vendor_ti
Contribute to Unlegacy-Android/proprietary_vendor_ti development by creating an account on GitHub.
github.com
GitHub - MightyM17/proprietary_vendor_samsung
Contribute to MightyM17/proprietary_vendor_samsung development by creating an account on GitHub.
github.com
ROM OS Version: 8.1.0 Oreo
Status: Alpha
Initial boot took 6-7 mins for me
Update 13/01/2022
userdebug build
Added zram to kernel
Fixed USB
Added patches for video
Added Terminal, nano, Launcher3Go
Overall, usable build now except wifi is broken
Update 15/01/2022
Fixed adb
Fixed wifi
Rebased zram form 3.15 kernel
Wow
Screenshots:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
cant wait to try out this new rom!
Mighty said:
Warranties:
THIS GUIDE COMES WITH NO WARRANTY. I AM NOT RESPONSIBLE OF BREAKING YOUR PRECIOUS TABLET.
PLEASE BACKUP YOUR DATA BEFORE CONTINUING, AS THIS GUIDE WILL WIPE YOUR DATA.
Also, this guide assumes you have the following requirements:
Bootloader unlocked
TWRP installed
Installation:
Before proceeding, pick the tablet and go to TWRP.
Do the normal wipes for clean flash.
Copy the zip to sdcard or on the tab wherever you like.
Flash the zip from TWRP.
Reboot and done, enjoy
Problems:
No SELinux support yet
Cameras will NOT work, as we are using a newer 3.4 kernel for Oreo!
You tell
Download:
espresso3g
Source Code:
GitHub - MightyM17/android_device_samsung_espressowifi-1
Contribute to MightyM17/android_device_samsung_espressowifi-1 development by creating an account on GitHub.
github.com
GitHub - MightyM17/android_device_samsung_espresso3g-1
Contribute to MightyM17/android_device_samsung_espresso3g-1 development by creating an account on GitHub.
github.com
GitHub - MightyM17/android_kernel_ti_omap4
Contribute to MightyM17/android_kernel_ti_omap4 development by creating an account on GitHub.
github.com
GitHub - MightyM17/android_hardware_ti_omap4: For Android Oreo and above
For Android Oreo and above. Contribute to MightyM17/android_hardware_ti_omap4 development by creating an account on GitHub.
github.com
GitHub - Unlegacy-Android/proprietary_vendor_ti
Contribute to Unlegacy-Android/proprietary_vendor_ti development by creating an account on GitHub.
github.com
GitHub - MightyM17/proprietary_vendor_samsung
Contribute to MightyM17/proprietary_vendor_samsung development by creating an account on GitHub.
github.com
ROM OS Version: 8.1.0 Oreo
Status: Alpha
Initial boot took 6-7 mins for me
Click to expand...
Click to collapse
i am not an expert at android but i had found some workarounds to use legacy camera on newer kernels on this website
https://review.lineageos.org/q/topic:android-o-mr1-camera-hal1-lineage-15.1
if these changes are made to the os is there a possibility of the camera working?
Mahaadevan said:
i am not an expert at android but i had found some workarounds to use legacy camera on newer kernels on this website
https://review.lineageos.org/q/topic:android-o-mr1-camera-hal1-lineage-15.1
if these changes are made to the os is there a possibility of the camera working?
Click to expand...
Click to collapse
Hi! Cameras here are a bit more complicated than just 7.1 -> 8.1 bump
We changed the kernel as well here which lead to change in the rmsg implementation by TI.
The 3.0 kernel blobs had camera support but since there are no 3.4 ones for our device, we use some from another device without camera, it doesnt work.
There are a few threads trying to get Ducati (OMAP4's imaging subsystem) to work with 3.4 kernel
[WIP/DEV] I've got a "booting" 3.4 kernel, looking to get a dev team started
[WIP/DEV] I've got a "booting" 3.4 kernel, looking to get a dev team started ~ # cat /proc/version Linux version 3.4.24-00010-g001648b-dirty ([email protected]) (gcc version 4.6.x-google 20120106 (prerelease) (GCC) ) #15 SMP PREEMPT...
forum.xda-developers.com
[ROM][AOSP][4.4/6.0/7.1] Unlegacy Android Project
The Unlegacy-Android Project Introduction Unlegacy-Android started out as the OMAP4-AOSP Project. It was created in late 2015 in order to maintain a clean and organized place for pure AOSP support for various OMAP4 devices, such as the Galaxy...
forum.xda-developers.com
Just search for ducati, camera or something similar and you'll find a lot of info
Mighty said:
Update 15/01/2022
Fixed adb
Fixed wifi
Rebased zram form 3.15 kernel
Click to expand...
Click to collapse
I might be missing some posts, but is it or will it be available for espresso wifi variants as well?
Alotheone said:
I might be missing some posts, but is it or will it be available for espresso wifi variants as well?
Click to expand...
Click to collapse
I use my personal laptop for these builds and have an espresso3g only, so im very quickly running out of space and time if i try and build espressowifi as well.
Since espresso3g depends on espressowifi any build using my sources should work without any issues for espressowifi, its just that i dont have the hardware for it, building two devices takes quite the space and build time
If you can build it yourself and/or have build servers in mind lmk
Mighty said:
Hi! Cameras here are a bit more complicated than just 7.1 -> 8.1 bump
We changed the kernel as well here which lead to change in the rmsg implementation by TI.
The 3.0 kernel blobs had camera support but since there are no 3.4 ones for our device, we use some from another device without camera, it doesnt work.
There are a few threads trying to get Ducati (OMAP4's imaging subsystem) to work with 3.4 kernel
[WIP/DEV] I've got a "booting" 3.4 kernel, looking to get a dev team started
[WIP/DEV] I've got a "booting" 3.4 kernel, looking to get a dev team started ~ # cat /proc/version Linux version 3.4.24-00010-g001648b-dirty ([email protected]) (gcc version 4.6.x-google 20120106 (prerelease) (GCC) ) #15 SMP PREEMPT...
forum.xda-developers.com
[ROM][AOSP][4.4/6.0/7.1] Unlegacy Android Project
The Unlegacy-Android Project Introduction Unlegacy-Android started out as the OMAP4-AOSP Project. It was created in late 2015 in order to maintain a clean and organized place for pure AOSP support for various OMAP4 devices, such as the Galaxy...
forum.xda-developers.com
Just search for ducati, camera or something similar and you'll find a lot of info
Click to expand...
Click to collapse
thanks for the info. i wasnt aware about this issue with the newer kernel but now it makes sense.
Mighty said:
I use my personal laptop for these builds and have an espresso3g only, so im very quickly running out of space and time if i try and build espressowifi as well.
Since espresso3g depends on espressowifi any build using my sources should work without any issues for espressowifi, its just that i dont have the hardware for it, building two devices takes quite the space and build time
If you can build it yourself and/or have build servers in mind lmk
Click to expand...
Click to collapse
I wish I could build, but unfortunately I can't.
If you turn off the screen by pressing the power button, or by the timer, the screen does not turn on with the power button or volume.
If charge when off, then the screen is always on with a black background. Also, when it is turned off and charging, if you hold down the power button, it will not turn on
Aurora store nightly installs but does not open as in aosp 8.1
Do you have the same problems?
Thanks a lot
upd. if turn on in a horizontal position, it does not respond to pressing and the window "A vendor image mismatch ..." hangs, and if you turn it on in a vertical position, then the window can be closed
Maybe @LR7875 will read this thread and build a ROM.zip.
TidalMist said:
If you turn off the screen by pressing the power button, or by the timer, the screen does not turn on with the power button or volume.
If charge when off, then the screen is always on with a black background. Also, when it is turned off and charging, if you hold down the power button, it will not turn on
Aurora store nightly installs but does not open as in aosp 8.1
Do you have the same problems?
Thanks a lot
upd. if turn on in a horizontal position, it does not respond to pressing and the window "A vendor image mismatch ..." hangs, and if you turn it on in a vertical position, then the window can be closed
Click to expand...
Click to collapse
same with turn on screen. Nothing help. only long press power button to force restart
TidalMist said:
If you turn off the screen by pressing the power button, or by the timer, the screen does not turn on with the power button or volume.
If charge when off, then the screen is always on with a black background. Also, when it is turned off and charging, if you hold down the power button, it will not turn on
Aurora store nightly installs but does not open as in aosp 8.1
Do you have the same problems?
Thanks a lot
upd. if turn on in a horizontal position, it does not respond to pressing and the window "A vendor image mismatch ..." hangs, and if you turn it on in a vertical position, then the window can be closed
Click to expand...
Click to collapse
Could you try enabling volume button wakes device from settings and check if that works?
Not even plugging it into charging wakes it up which is very weird.
Didnt try aurora store, could you send the logcat?
The horizontal/vertical problem is very sus, i get the vendor thingy but i can just press okay and it goes away
alright, im going to build this for espressowifi @Mighty
its nice to finally get off the aging UA code since its not getting updated anymore
lineageos is way nicer
what roomservice.xml are you using and which operating system your using? (im using ubuntu 16.04, but i dont know if its the right version to build this. last time i built lineageos 15.1 for a different device i used ubuntu 20.04, so im wondering if i need to use that.
RDS5 said:
alright, im going to build this for espressowifi @Mighty
its nice to finally get off the aging UA code since its not getting updated anymore
lineageos is way nicer
what roomservice.xml are you using and which operating system your using? (im using ubuntu 16.04, but i dont know if its the right version to build this. last time i built lineageos 15.1 for a different device i used ubuntu 20.04, so im wondering if i need to use that.
Click to expand...
Click to collapse
Shouldn't matter, it's Ubuntu 20.04 in wsl that I use.
Sources are in #1 post
The issue of device not waking up seems to be much deeper, once it's in sleep it doesn't change its state no matter what
RDS5 said:
alright, im going to build this for espressowifi @Mighty
Click to expand...
Click to collapse
If you or @Mighty can share your manifest, or let me know which branch of @Mighty's repos to use, I can try t make a build of LineageOS for microg
Wow! It's amazing! I still use my tablet and I'm glad to see that someone supports it! Looking forward to the Wi-Fi build! Thank you very much!
Related
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Team OctOs presents Oct-L.
We maintain a current release record and change-log on our website: http://www.teamoctos.com
- Please Do Not Mirror our files without talking to us. We can do that ourselves should we desire to. -
Frequently Asked Questions
Q: Is this Android 5 (Lollipop)?
A: Yes, this is Android 5.1.1
Q: What code is Oct-L based on?
A: Starting with Oct-L, we've rebased OctOs on the CyanogenMod 12 code.
Q: What happened to AOSP?
A: All Android code is based on the Android Open Source Project (AOSP). Under previous releases, we tried very hard to limit the number of "Not from Google directly" repositories that we used. Unfortunately, issues with devices, the need for Code Aurora Foundation (CAF) repositories for Qualcomm devices, and compatibility issues meant fighting code more often than not. We decided that since the code-base for many repositories were the same across most ROMs, picking a starting point to build the user experience on outweighed the desire to craft code from scratch, or fix broken code to make it work with other changes we already had.
Q: Why isn't there XXXXXXX feature.
A: Shoot us a Suggestion if you want to see something added. While we are not going to promise to implement, we will always look into it
Q: But CM and all the others have..
A: ROM developers, including CM, build something they want to use. The ROM developer that includes something they won't run implies less than 100% effort to ensure it does work. As a team, we have similar goals and objectives. If XYZ ROM has a feature you want, and we don't include (or don't want to include), feel free to use XYZ ROM, or build your own custom version of Oct-L.
Q: Superuser or SuperSU?
A: Team OctOs uses SuperSU and is installed automatically.
Bugs:
Bugs happen. Our testers are very good at breaking things, but no where near as good as the rest of the Android public. In order to investigate and fix issues, we need the help of the users who are going to report them. The Android OS has many nifty features to help us in this, but only if we can engage the user to assist us.
Logs, Logcat, and the Android Debugging Bridge (ADB)
Like any other OS, Android has multiple log files that are generated and record the goings-on of the system. As a user, you have two basic ways to view and pull these to send to us. Without the information in the logfiles, there simply is not a whole lot of information to go on.
Log file APKs
Team OctOs recommends SysLog from the Android Market. This application will allow you to selectively pick any (or all) of the system logs, compress them into a .ZIP file, and allow you to save, email, move to your Copy/DropBox/Cloud Storage account, etc.
ADB Logcat
The Android Debugging Bridge (ADB) is a powerful tool available from Google as part of the Android Software Development Kit (SDK). Used for many things, being able to selectively see, in real-time, what your device is doing cannot be downplayed. While there is more setup involved, if you are doing consistent ROM flashing, you really should invest the time to get setup properly to do it.
ADB Logcat tutorial here: How to create a logcat log
Basic Instructions:
Download ROM .zip file and MD5 file, and grab your favourite Android 5 based GApps package
Reboot to Recovery (Note: Use Reboot to Recovery from Power Menu, Hardware-based boot to recovery, or adb reboot recovery - ROM Manager or similar software is NOT supported)
--- TWRP is the ONLY recovery Team OctOs uses - We do not support flashing on CWM ---
Factory Reset from TWRP
Flash ROM and GApps .ZIP files
Reboot
The Oct-L ROM installation script will automatically wipe /system, /cache, and /data/dalvik-cache. There is no need to do these before or after flashing the ROM unless you are instructed to by your GApps Provider
* OctOS ROM Downloads
The foundation of the Android OS is the fact that is it open-source. We have all code we use internally in the creation of Oct-L available on our GitHub repositories.
Unless otherwise specified, all Oct-L builds use the device's stock CyanogenMod 12.1 kernel.
Team OctOs GitHub - http://www.github.com/Team-OctOs
Team OctOs Gerrit Review - http://review.teamoctos.com:8080
Team OctOs GPLv2 License - http://www.teamoctos.com/license/
Team OctOs Patreon Campaign - https://www.patreon.com/TOctOs
Want To Build Your Own?
Check out the ReadMe on our GitHub for Instructions
Follow Us at the various websites below!
XDA:DevDB Information
OctOS, ROM for the OEM Cross Device Development
Contributors
ujwal.p
Source Code: http://www.github.com/Team-OctOs
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.10.x
Based On: CyanogenMod
Version Information
Status: Stable
Current Stable Version: 1.0
Stable Release Date: 2015-08-12
Created 2015-08-12
Last Updated 2015-09-17
Reserved
More Screenshots in the dedicated Screenshots TAB
Labeled as Stable. Is that so? Anyways, thanks for the Rom.
@ujwal bro please make a build for sprout 8 too please.... _/\_
Shuvo_bd said:
Labeled as Stable. Is that so? Anyways, thanks for the Rom.
Click to expand...
Click to collapse
Yes u heard it right, its stable build
Sent from my Mi-498 using Tapatalk
abinsur279 said:
@ujwal bro please make a build for sprout 8 too please.... _/\_
Click to expand...
Click to collapse
Will take time as, most of the sprout8 builds are not popular and this rom takes 2 hr to build and on top of that im a student.
Sent from my Mi-498 using Tapatalk
ujwal.p said:
Will take time as, most of the sprout8 builds are not popular and this rom takes 2 hr to build and on top of that im a student.
Sent from my Mi-498 using Tapatalk
Click to expand...
Click to collapse
Ok bro, i appreaciate your work, but when you have time please make a build for it too [req]:good:
abinsur279 said:
Ok bro, i appreaciate your work, but when you have time please make a build for it too [req]:good:
Click to expand...
Click to collapse
Yeah, I will
Sent from my Mi-498 using Tapatalk
Bro Currently I am using your awesome Rom . Really its stable .
Big thanks for your hard work
Choritrowhin said:
Bro Currently I am using your awesome Rom . Really its stable .
Big thanks for your hard work
Click to expand...
Click to collapse
There is a "thanks" button for appreciating my work :3
Sent from my A0001 using Tapatalk
Thread updated with new build, very fluid and steady
Hit here:-
https://www.androidfilehost.com/?fid=24052804347810298
DATA/3G SIM Switching
hello>>>>
i appreciate your hard work. the rom is too smooth.
still smoth with 5 modules in xposed.
it would be very good anjd great if you fixed the Data/3g sim switching bugs
Nice Work.... Lovely And Smooth ROM
I appeciate your hard works.
I found your rom is very smooth even if i have 9 xposed modules running.
I m currently using your latest build.
i love the way that you keep all customization in Tentacles. its easy to navigate.
it would be better if you added some other features like Gesture Lock Screen, App Side Bar, System Animations with duration, Data Traffic Monitors, screenshots delay etc.
moreover, your ROM is the best ROM i have ever used.
meprakash_pyc said:
hello>>>>
i appreciate your hard work. the rom is too smooth.
still smoth with 5 modules in xposed.
it would be very good anjd great if you fixed the Data/3g sim switching bugs
Click to expand...
Click to collapse
Sim switching is an issue which cm has for our device, and the latest cm changes has made it difficult to patch the files, but anyway, il try my level best
Sent from my A0001 using Tapatalk
meprakash_pyc said:
I appeciate your hard works.
I found your rom is very smooth even if i have 9 xposed modules running.
I m currently using your latest build.
i love the way that you keep all customization in Tentacles. its easy to navigate.
it would be better if you added some other features like Gesture Lock Screen, App Side Bar, System Animations with duration, Data Traffic Monitors, screenshots delay etc.
moreover, your ROM is the best ROM i have ever used.
Click to expand...
Click to collapse
My pleasure
For feature requests, head on to their g+ community and request there, the team would be obliged to work on it
Sent from my A0001 using Tapatalk
It is bit offtopic I appreciate your passion. How do you post one build after another of different ROMs.My data pack gets emptied on downloading ROMs only.
rohitsonone said:
It is bit offtopic I appreciate your passion. How do you post one build after another of different ROMs.My data pack gets emptied on downloading ROMs only.
Click to expand...
Click to collapse
Unlimited internet (BSNL) :3
Sent from my A0001 using Tapatalk
New build is up, links updated in OP.
Else hit here,
https://www.androidfilehost.com/?fid=24052804347817516
Xposed and Lucky patcher
ujwal.p said:
New build is up, links updated in OP.
Else hit here,
https://www.androidfilehost.com/?fid=24052804347817516
Click to expand...
Click to collapse
i flashed xposed framework and installed 8 modules. all are working properly. the use of xuimod makes the rom a little bit slow and laggy. but when i apply custom patch from lucky patcher (e.g. Greenify), the result comes like this "patch already done or pattern error and failed". and after closing this when i open an app it automatically closes without any popup message. and i have to reboot my device. what's the problem?????
meprakash_pyc said:
i flashed xposed framework and installed 8 modules. all are working properly. the use of xuimod makes the rom a little bit slow and laggy. but when i apply custom patch from lucky patcher (e.g. Greenify), the result comes like this "patch already done or pattern error and failed". and after closing this when i open an app it automatically closes without any popup message. and i have to reboot my device. what's the problem?????
Click to expand...
Click to collapse
Get me a log.
LineageOS is a free, community built, aftermarket firmware distribution of Android 7.1.2 (Nougat), which is designed to increase performance and reliability over stock Android for your device.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. You will need to provide your own Google Applications package (gapps). LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
This thread is for Unofficial LineageOS 14.1 builds for lt02ltespr (SM-T217S). The following will not be supported here:
Custom kernels
Mods
Xposed
I don't support Xposed and any logcat which includes a Xposed module will be ignored. You're kindly invited to not report bugs if you:
Flashed a custom kernel
Installed or did mods from untrusted sources
Modified system files
First time flashing LineageOS 14.1 on your device, or coming from another ROM?
Download the zip(s)
Install a compatible Recovery
Perform a nandroid backup of your current ROM (Optional)
Wipe data/factory reset
Flash LineageOS
Install the Google Apps addon package (Optional)
Reboot
Official Sprint Build
Older builds
4/13/17 Sprint Build
4/10/17 Sprint Build
4/8/17 Sprint Build
Addon su
su binary is not included in the ROM, you have to flash it manually after
addon su (choose arm)
Google Apps:
Mind The gapps 7.1.2
or
Open Gapps
Kernel
android_kernel_samsung_msm8930-common
My local manifest:
local_manifest
@aytex (He made all of the banners on this post)
@arco68 (For his work on the Galaxy S4 Mini)
@DarkFrenzy (I used his work as a reference to get some of the device specific fixes)
XDA:DevDB Information
[ROM][7.1.2][UNOFFICIAL] LineageOS 14.1 - SM-T217S, ROM for the Samsung Galaxy Tab 3 7.0
Contributors
deadman96385, flashalot
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.4.x
Version Information
Status: Beta
Created 2017-04-09
Last Updated 2017-04-08
You tell me
Other issues?
Before posting in this thread, make sure of a few things:
You used the search function of the forums.
If you are the only one having a problem. Boot into recovery, wipe data/factory reset, reflash the rom/gapps and nothing else. Boot up and see if the problem persists.
Make sure your post is relevant to this thread.
Logs! You can use this: https://play.google.com/store/apps/details?id=com.tortel.syslog
Changelog:
4/13/17
Fixed the camera Thanks @DarkFrenzy
Removed unused drm blobs
Updated the time_daemon from shamu
4/10/17
Fixed glitchy power off animation Thanks @DarkFrenzy
Removed button backlight settings (They are unsupported)
Lowered the first boot time by enabling dexpreopt (The zip is a bit bigger but the old boot time was just unacceptable in my eyes)
Enabled some core system files to stay in ram so things should be a bit smoother.
Fixed adb not working unless you had selected mtp as the usb type
4/8/17
Initial release
I have redone the device trees from scratch based off of the galaxy s4 mini trees. @DarkFrenzy did the same thing awhile ago but he did not keep the history so it was useless to me. I also wanted to redo it because it lets me understand it better. My end goal is for it to become official but for that i have to fix the camera. But i have already upstreamed the kernel commits into the LineageOS msm8930-common kernel.
Thanks for still supporting our T217S. I'll give it shot and report.
deadman96385 said:
I have redone the device trees from scratch based off of the galaxy s4 mini trees. @DarkFrenzy did the same thing awhile ago but he did not keep the history so it was useless to me. I also wanted to redo it because it lets me understand it better. My end goal is for it to become official but for that i have to fix the camera. But i have already upstreamed the kernel commits into the LineageOS msm8930-common kernel.
Click to expand...
Click to collapse
Thanks for the Support for this device.
The camera is working fine in my RR build which I built with latest changes from Serrano tree which has some libc fix for camera.
For screen bug you have to set animate to true in device Samsung qcom repo like this https://github.com/FaArIsH/android_...mmit/51f24a5eed4203356c6669614f4dcbe979d74cc4
Yes its better to start from scratch then using my trees I m very lazy to use github that's y I don't use it the best way.
And also its best to give credits to @arco68 instead of me.
Sent from my SM-T217S using Tapatalk
DarkFrenzy said:
Thanks for the Support for this device.
The camera is working fine in my RR build which I built with latest changes from Serrano tree which has some libc fix for camera.
For screen bug you have to set animate to true in device Samsung qcom repo like this https://github.com/FaArIsH/android_...mmit/51f24a5eed4203356c6669614f4dcbe979d74cc4
Yes its better to start from scratch then using my trees I m very lazy to use github that's y I don't use it the best way.
And also its best to give credits to @arco68 instead of me.
Sent from my SM-T217S using Tapatalk
Click to expand...
Click to collapse
My trees are based on the latest serrano tree's i am not sure why the camera does not work. Thanks for the suggestion on the screen bug the next build will have it i merged in the samsung qcom repo.
New build in OP
Changelog:
Fixed glitchy power off animation Thanks @DarkFrenzy
Removed button backlight settings (They are unsupported)
Lowered the first boot time by enabling dexpreopt (The zip is a bit bigger but the old boot time was just unacceptable in my eyes)
Enabled some core system files to stay in ram so things should be a bit smoother.
Fixed adb not working unless you had selected mtp as the usb type
Thank you!! I'll be watching to see how this pans out.
New build in OP
4/13/17 build
Fixed the camera Thanks @DarkFrenzy
Removed unused drm blobs
Updated the time_daemon from shamu
I spoke too soon, when I wake it up from sleep the backlight is off.
New update in OP
This unoffical thread will now be for test builds that i deem stable so the community can test them before i merge the changes into the "stable" lineage builds.
Changelog:
Removed more unused drm blobs
Fixed backlight issues (Reverted back to the original liblights)
Update prima wlan firmware (This should fix 5ghz wifi let me know though i do not have one)
I am having a problem that everytime I try to install is comes up with error 7 and doesnt do anything in twrp.
Update:
Looks like I needed older version of twrp. It flashed waiting on bootup
Another problem, when doing the setup at first boot up I select new device and it crashes the wizard. I cant get past the wizard at all.
Azrael.arach said:
Another problem, when doing the setup at first boot up I select new device and it crashes the wizard. I cant get past the wizard at all.
Click to expand...
Click to collapse
Use the gapps from this post rather than OpenGapps.
Hello! Is there a way to port this over to SM-T210(R) and if so, could anyone give me resources and tips to help this project?
Thanks!
TrendingTech said:
Hello! Is there a way to port this over to SM-T210(R) and if so, could anyone give me resources and tips to help this project?
Thanks!
Click to expand...
Click to collapse
No sadly the other variants of this tablet use a different cpu/gpu so a direct port is not possible
Is it safe to flash the wifionly.zip file onto this image so I can remove the annoying Sprint messages (I have no intention of ever using the mobile functionality)?
zerbey said:
Is it safe to flash the wifionly.zip file onto this image so I can remove the annoying Sprint messages (I have no intention of ever using the mobile functionality)?
Click to expand...
Click to collapse
No. That is for RR 5.8.2 only. You can edit u r build prop and set .... tell u later don't remember ....
Sent from my ASUS_T00J using Tapatalk
DarkFrenzy said:
No. That is for RR 5.8.2 only. You can edit u r build prop and set .... tell u later don't remember ....
Sent from my ASUS_T00J using Tapatalk
Click to expand...
Click to collapse
Thanks, for now I'll just keep it in Airplane mode with only WiFi enabled.
Sent from my ONEPLUS A3000 using Tapatalk
DarkFrenzy said:
No. That is for RR 5.8.2 only. You can edit u r build prop and set .... tell u later don't remember ....
Sent from my ASUS_T00J using Tapatalk
Click to expand...
Click to collapse
I would like to know this buildprop setting. Thanks!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Disclaimer: OctOs is a WIP. It has been evaluated as being stable, and is suitable for daily use in most cases. While it may be considered stable, there may be unknown bugs. The development team is not responsible for any damage to your device or your information.
Click to expand...
Click to collapse
Team OctOs presents Oct-N.
We maintain a current release record and change-log on our website: http://www.teamoctos.com
We have Gapps here.
http://opengapps.org
***USE Gapps of your choosing, we prefer Open Gapps***
- Please Do Not Mirror our files without talking to us. We can do that ourselves should we desire to. -
Feature List
Substratum rootless theme engine support (must install Substratum from play store)
Tentacles settings!
Pixel Launcher Included
OmniSwitch
Power menu options
Screenshot
Screen record
DPI settings
Status bar time and date options
Status bar network traffic indicator
Status bar notification settings
Quick tile settings
Volume button playback control
Volume button wake
DUI (fling, pulse, smartbar)
Screen record
And much more!!!!
Click to expand...
Click to collapse
Frequently Asked Questions
Q: Is this Android 7 (Nougat)?
A: Yes, this is Android 7.1.2
Q: What code is Oct-N based on?
A: This version of Oct-N is based on LineageOS 14.1
Q: Why isn't there XYZ feature?
A: Shoot us a Suggestion if you want to see something added. While we are not going to promise to implement, we will always look into it
Q: But all the others have..
A: ROM developers, build something they want to use. The ROM developer that includes something they won't run implies less than 100% effort to ensure it does work. As a team, we have similar goals and objectives. If XYZ ROM has a feature you want, and we don't include (or don't want to include), feel free to use XYZ ROM, or build your own custom version of Oct-N.
Q: What about root?
A: Root is removed by default (user will be able to flash which ever root zip they want)
Bugs:
Bugs happen. Our testers are very good at breaking things, but no where near as good as the rest of the Android public. In order to investigate and fix issues, we need the help of the users who are going to report them. The Android OS has many nifty features to help us in this, but only if we can engage the user to assist us.
Logs, Logcat, and the Android Debugging Bridge (ADB)
Like any other OS, Android has multiple log files that are generated and record the goings-on of the system. As a user, you have two basic ways to view and pull these to send to us. Without the information in the logfiles, there simply is not a whole lot of information to go on.
Log file APKs
Team OctOs recommends SysLog from the Android Market. This application will allow you to selectively pick any (or all) of the system logs, compress them into a .ZIP file, and allow you to save, email, move to your Copy/DropBox/Cloud Storage account, etc.
ADB Logcat
The Android Debugging Bridge (ADB) is a powerful tool available from Google as part of the Android Software Development Kit (SDK). Used for many things, being able to selectively see, in real-time, what your device is doing cannot be downplayed. While there is more setup involved, if you are doing consistent ROM flashing, you really should invest the time to get setup properly to do it.
ADB Logcat tutorial here: How to create a logcat log
Basic Instructions:
Download ROM .zip file and MD5 file, and grab your favorite Open Gapps package http://opengapps.org
Reboot to Recovery (Note: Use Reboot to Recovery from Power Menu, Hardware-based boot to recovery, or adb reboot recovery - ROM Manager or similar software is NOT supported)
--- TWRP is the ONLY recovery Team OctOs uses - We do not support flashing on CWM ---
The Oct-N ROM installation script will automatically wipe /system, /cache, and /dalvik-cache. There is no need to do these before or after flashing the ROM unless you are instructed to by your Gapps Provider. When dirty flashing weekly updates, you MUST reflash Gapps along with any other files, apps, custom mods or kernels etc.. (anything that resides in system partition)
Flash ROM, GApps and any additional .ZIP files
Reboot
Download
Download from Team-OctOS web site!
Change log
View change log on Team-OctOS web site!
The foundation of the Android OS is the fact that is it open-source. We have all code we use internally in the creation of Oct-N available on our GitHub repositories.
Unless otherwise specified, all Oct-N builds kernel souce can be found on github at Team-OctOS.
Team OctOs GitHub - http://www.github.com/Team-OctOs
Team OctOs Gerrit Review - http://www.teamoctos.com:8080
Team OctOs GPLv2 License - http://www.teamoctos.com/license/
Team OctOs Patreon Campaign - https://www.patreon.com/TOctOs
Donate to OctOS Development (PayPal)
Want To Build Your Own?
Check out the ReadMe on our GitHub for Instructions
Special thanks to
Our testers, without which, there would be no public releases for OctOs
We would also like to thank
AOSP
Open Gapps
LineageOS
Anyone else who has ever submitted Open-Source code
Click to expand...
Click to collapse
Follow Team-OctOS!
XDA:DevDB Information
Official Team OctOs Oct-N ROM for Kenzo/Kate, ROM for the Xiaomi Redmi Note 3
Contributors
dadi11, manfromgta
Source Code: http://www.github.com/Team-OctOs
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.10.x
ROM Firmware Required: Unlocked BL, Recovery
Based On: LineageOS
Version Information
Status: Snapshot
Stable Release Date: 2017-05-05
Created 2017-05-03
Last Updated 2017-07-14
Reserved
temporary download link: https://mirrors.c0urier.net/android/Dadi11/OctOS/
helo dadi glad you're back, which are the current bugs of the rom? same as Lineage 14.1?
No kenzo?
Bolo46 said:
No kenzo?
Click to expand...
Click to collapse
I am uploading the initial build on my server. Upcoming builds will be compiled weekly and hosted on the OctOS team's server
Nice, new rom!
ok guys, the temporary download link is there: https://mirrors.c0urier.net/android/Dadi11/OctOS/
although, this is the initial build, it wasn't tested and may be buggy.
if you're interested in trying this rom, I am recommending you to wait for the tested/fixed build released tomorrow (community build by me) or on Friday (weekly, compiled on official server)
dadi11 said:
ok guys, the temporary download link is there: https://mirrors.c0urier.net/android/Dadi11/OctOS/
although, this is the initial build, it wasn't tested and may be buggy.
if you're interested in trying this rom, I am recommending you to wait for the tested/fixed build released tomorrow (community build by me) or on Friday (weekly, compiled on official server)
Click to expand...
Click to collapse
Upstreamed to latest LOS changes?(goodix)
No crowdin?(
Sent from my Xiaomi Redmi Note 3 using XDA Labs
Does this rom have unified fp?
wow dadi11 ! this rom gonna be great
Any screenshots ?
dadi11 said:
ok guys, the temporary download link is there: https://mirrors.c0urier.net/android/Dadi11/OctOS/
although, this is the initial build, it wasn't tested and may be buggy.
if you're interested in trying this rom, I am recommending you to wait for the tested/fixed build released tomorrow (community build by me) or on Friday (weekly, compiled on official server)
Click to expand...
Click to collapse
@dadi11 name sounds pretty familiar to me... If im not wrong, you contributed for LG Optimus G i guess....
New
Sent from my Redmi Note 3 using Tapatalk
What about signal strength?
JaRi1976 said:
What about signal strength?
Click to expand...
Click to collapse
Test and tell us
hasan4791 said:
@dadi11 name sounds pretty familiar to me... If im not wrong, you contributed for LG Optimus G i guess....
Click to expand...
Click to collapse
Yeah he also maintain xenonhd for kenzo.
TheGamingDiamond said:
Does this rom have unified fp?
Click to expand...
Click to collapse
Nope.
Nice, another contribution from you @dadi11! I've always been using your xenonHD ROM, do you have a personal preference between OctOS and XenonHD?
atendedor_de_boludos said:
Test and tell us
Click to expand...
Click to collapse
I'm not a tester....lol
TheGamingDiamond said:
Does this rom have unified fp?
Click to expand...
Click to collapse
it will in the next build (today)
hasan4791 said:
@dadi11 name sounds pretty familiar to me... If im not wrong, you contributed for LG Optimus G i guess....
Click to expand...
Click to collapse
yes, previously I was active in Optimus G and G3 community also few more places..
iG0tB0lts said:
Nice, another contribution from you @dadi11! I've always been using your xenonHD ROM, do you have a personal preference between OctOS and XenonHD?
Click to expand...
Click to collapse
I do not answer these kinds of questions
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
LineageOS is a free, community built, aftermarket firmware distribution of Android 11, which is designed to increase performance and reliability over stock Android for your device.
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
Instructions :
https://wiki.lineageos.org/devices/fajita
Downloads :
https://download.lineageos.org/fajita
Reporting Bugs
DO NOT Report bugs if you're running a custom kernel or you installed Xposed
Grab a logcat right after the problem has occurred. (Please include at least a few pages of the log, not just the last few lines, unless you know what you're doing.)
If it is a random reboot, grab /sys/fs/pstore/console-ramoops and /sys/fs/pstore/dmesg-ramoops-0. (Do not bother getting a logcat unless you can get it just before the reboot. A logcat after a reboot is useless)
If the problem disappears after running "setenforce 0" from a root shell, grab /data/misc/audit/audit.log
Remember to provide as much info as possible. The more info you provide, the more likely that the bug will be solved. Please also do not report known issues. Any bug not reported in the bug report format below may be ignored.
Code:
What is your--
LineageOS version:
LineageOS Download url:
Gapps version:
Did you--
wipe:
restore with titanium backup:
reboot after having the issue:
Are you using--
a task killer:
a non-stock kernel:
other modifications:
Provide any additional information (observations/frequency of problem/last version it worked on/etc) as needed:
LuK1337 said:
[*]Flash gapps
Click to expand...
Click to collapse
Are there any Android 11 Gapps in particular that you recommend?
Only ones I've found so far for 11 are NikGapps?
What is WFD????
Marco89989 said:
What is WFD????
Click to expand...
Click to collapse
Wifi Direct
OhioYJ said:
Wifi Direct
Click to expand...
Click to collapse
WiFi Display.
LuK1337 are you using same android_kernel_oneplus_sdm845 as 17.1 ? Its 18.0 branch isn't on lineageos github yet and did not see anything in your personal github.
dwardo said:
LuK1337 are you using same android_kernel_oneplus_sdm845 as 17.1 ? Its 18.0 branch isn't on lineageos github yet and did not see anything in your personal github.
Click to expand...
Click to collapse
Look at /proc/version and answer this question yourself.
LuK1337 said:
Look at /proc/version and answer this question yourself.
Click to expand...
Click to collapse
I didn't install it...
Was just considering to start building it myself.
Verizon support? Other a11 ROMs Verizon not supported yet.
Flashed this from RR Q Rom.
0)Boot To Recovery from 3.4.0.2 official and
1)Swipe to Factory Wipe
2)Flash Lineage 18
3)Flash TWRP
4)Flash Lineage 18
5)Flash TWRP
6)Reboot to Recovery
7)Flash GAPPS
8)Reboot to System
9)Reboot to Recovery
10)Flash magisk-debug.zip
11)Reboot to System. Done
Magisk 21 doesn't work for me. Anyone having same issue?
https://youtu.be/vxUeUrEcaqY?list=WL&t=85
Front cam crashes when i bring face closer to camera. Logcat given.
Anyone having issues with google drive auto-closing (won't launch)?
Yes buddy... i had the same issue and the phone stuck onto Qualcomm:Crash Dump while booting.
I would have to again install TWRP 3.4.0-2 and it would boot up.
But this magisk-debug.zip works
LuK1337 said:
Look at /proc/version and answer this question yourself.
Click to expand...
Click to collapse
Is the kernel source closed for the moment, last commit in device repo is also from 1st September. Must be some valid reason. Your device sources are key for other custom roms.
@LuK1337 you are a great developer, would really appreciate the local manifest in op if all the dependencies repo does not get synced automatically on build start. You do all the hardwork but some people get very happy just after compiling the rom from your source. Some like me want to add desired features on it. OP6t is about to be an EOL device, you are the only saviour for us.
Bdw, great job done with eleven bring up.
dwardo said:
I didn't install it...
Was just considering to start building it myself.
Click to expand...
Click to collapse
brajesh.sharma87 said:
Is the kernel source closed for the moment, last commit in device repo is also from 1st September. Must be some valid reason. Your device sources are key for other custom roms.
@LuK1337 you are a great developer, would really appreciate the local manifest in op if all the dependencies repo does not get synced automatically on build start. You do all the hardwork but some people get very happy just after compiling the rom from your source. Some like me want to add desired features on it. OP6t is about to be an EOL device, you are the only saviour for us.
Bdw, great job done with eleven bring up.
Click to expand...
Click to collapse
The question was not for me, but I would still like to share something: There are no kernel/config changes needed for R (https://android.googlesource.com/kernel/configs/+/refs/heads/android11-release/r/), so 17.1 and 18 can use the same branch without problems.
This rom is amazing and so smooth all we need now is to pass safety net and if gapps can be included battery life is amazing and very fluid I tried other 11 Roms but this one is very smooth just need to pass safety net and is there a telegram group ?
bigblood104 said:
This rom is amazing and so smooth all we need now is to pass safety net and if gapps can be included battery life is amazing and very fluid I tried other 11 Roms but this one is very smooth just need to pass safety net and is there a telegram group ?
Click to expand...
Click to collapse
Gapps will never be included in lineage.
Anonymous Vagrant said:
10)Flash magisk-debug.zip
Magisk 21 doesn't work for me. Anyone having same issue?
Click to expand...
Click to collapse
Yes. In fact no other canary / debug build works for me except the old one that you linked to. All the updated ones, and Magisk 21 all result in my phone booting straight to Fastboot. Uninstalling them make the phone boot again. That one from September works fine for some reason?
OhioYJ said:
Yes. In fact no other canary / debug build works for me except the old one that you linked to. All the updated ones, and Magisk 21 all result in my phone booting straight to Fastboot. Uninstalling them make the phone boot again. That one from September works fine for some reason?
Click to expand...
Click to collapse
I have had great success in using the Magisk-Modded.zip from the SyberiaOS project, that can be had here:
https://sourceforge.net/projects/syberiaos/files/twrp/Magisk_Modded.zip/download
You might try that and see if it works for you. It should.
verizon CDMA support???
Just another ROM Built from source by me guys, I hope you all will like it.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Project Sakura is a custom ROM based on Lineage OS, It tries to remain true to it while also providing some more functionality and UI changes. Its sole purpose is to provide a platform which is powered by Lineage and is more customisable than Lineage.
What Works:
•everything
Bugs:
•none
ROM Download link:
Download | Alternate
Source:
GitHub - lenovo-devs/android_device_lenovo_TBX304: lineage device tree for Lenovo Tab 4 10 (TB-X304)
lineage device tree for Lenovo Tab 4 10 (TB-X304). Contribute to lenovo-devs/android_device_lenovo_TBX304 development by creating an account on GitHub.
github.com
GitHub - lenovo-devs/android_device_lenovo_tb-common
Contribute to lenovo-devs/android_device_lenovo_tb-common development by creating an account on GitHub.
github.com
GitHub - lenovo-devs/android_kernel_lenovo_msm8953
Contribute to lenovo-devs/android_kernel_lenovo_msm8953 development by creating an account on GitHub.
github.com
GitHub - lenovo-devs/proprietary_vendor_lenovo
Contribute to lenovo-devs/proprietary_vendor_lenovo development by creating an account on GitHub.
github.com
Android Version: Android 10
Kernel: Linux 3.18X
Based on: LineageOS
Status: Stable
wow!! such a beautiful rom, best rom for this device I tried so far, thx alot for this great rom
Good to see there is someone who is working hard to keep this tablet alive, Thanks alot for your hardwork, Cheers
Nitiín said:
Good to see there is someone who is working hard to keep this tablet alive, Thanks alot for your hardwork, Cheers
Click to expand...
Click to collapse
what version is that, L or F? Since this rom is built on top of lineage, then most likely it's target for L version as well?
ravenchaser210 said:
what version is that, L or F? Since this rom is built on top of lineage, then most likely it's target for L version as well?
Click to expand...
Click to collapse
I have the L or lte variant, but as specified in the title it must work perfectly on F variant as well.
Nitiín said:
I have the L or lte variant, but as specified in the title it must work perfectly on F variant as well.
Click to expand...
Click to collapse
unfortunately, I tried the L version from Lineage os side, both 16/17, it stuck in boot screen forever...I doubt this gonna work either, but could try later
Akash23q2 said:
Just another ROM Built from source by me guys, I hope you all will like it.
View attachment 5387233
Project Sakura is a custom ROM based on Lineage OS, It tries to remain true to it while also providing some more functionality and UI changes. Its sole purpose is to provide a platform which is powered by Lineage and is more customisable than Lineage.
What Works:
•everything
Bugs:
•none
View attachment 5387249
ROM Download link:
Download | Alternate
View attachment 5387247
Source:
GitHub - lenovo-devs/android_device_lenovo_TBX304: lineage device tree for Lenovo Tab 4 10 (TB-X304)
lineage device tree for Lenovo Tab 4 10 (TB-X304). Contribute to lenovo-devs/android_device_lenovo_TBX304 development by creating an account on GitHub.
github.com
GitHub - lenovo-devs/android_device_lenovo_tb-common
Contribute to lenovo-devs/android_device_lenovo_tb-common development by creating an account on GitHub.
github.com
GitHub - lenovo-devs/android_kernel_lenovo_msm8953
Contribute to lenovo-devs/android_kernel_lenovo_msm8953 development by creating an account on GitHub.
github.com
GitHub - lenovo-devs/proprietary_vendor_lenovo
Contribute to lenovo-devs/proprietary_vendor_lenovo development by creating an account on GitHub.
github.com
View attachment 5387251
Android Version: Android 10
Kernel: Linux 3.18X
Based on: LineageOS
Status: Stable
Click to expand...
Click to collapse
Thanks Bro Everything working good BUT OTG is not working in this built and I badly need it.
@Akash23q2 Bro can You port any custom ROM for my device lenevo TBX304L.
NEED RECENT APPS LOCK FEATURE AND ONE TAP CLEAN ALL APPS FEATURE
You are legend and please make more ROM for lenevo TBX304L
Thank You
I AM SHARING SOME OF MY SCREENSHOT OTHERS HELP
[email protected] said:
Thanks Bro Everything working good BUT OTG is not working in this built and I badly need it.
@Akash23q2 Bro can You port any custom ROM for my device lenevo TBX304L.
NEED RECENT APPS LOCK FEATURE AND ONE TAP CLEAN ALL APPS FEATURE
You are legend and please make more ROM for lenevo TBX304L
Thank You
I AM SHARING SOME OF MY SCREENSHOT OTHERS HELP
Click to expand...
Click to collapse
Glad you liked it, mtp host or you can say it otg, is broken in device tree, so I will need to fix it in device tree, it's not rom side issue.
Apart from it, for lock option and clear all in recents, you can consider flashing this magisk module.
Here is the link to module - https://drive.google.com/file/d/1DbnNV3GvoT_3lyEZ6xiwKCx17Ktzkd6o/view?usp=sharing
Akash23q2 said:
Glad you liked it, mtp host or you can say it otg, is broken in device tree, so I will need to fix it in device tree, it's not rom side issue.
Apart from it, for lock option and clear all in recents, you can consider flashing this magisk module.
Here is the link to module - https://drive.google.com/file/d/1DbnNV3GvoT_3lyEZ6xiwKCx17Ktzkd6o/view?usp=sharing
Click to expand...
Click to collapse
Glad you Replied it, Please fix it in device tree as soon as possible.
And the module link that you send is not working on my tab, it's enlarge app icon size and disable recent options.
If You can provide me your Telegram I'd or your group I'd ,it will be helpful for me to contact you directly
Thank You
[email protected] said:
Glad you Replied it, Please fix it in device tree as soon as possible.
And the module link that you send is not working on my tab, it's enlarge app icon size and disable recent options.
If You can provide me your Telegram I'd or your group I'd ,it will be helpful for me to contact you directly
Thank You
Click to expand...
Click to collapse
I am a bit busy these days with my studies so I will look into it when I will get time.
For launcher stuff, check this guide Link
Hi, @Akash23q2 I had it installed but had issues with the worn out tablet and reinstalled. Now I can't get it to boot. Would you mind looking at log to see if you can identify where the error is. I pulled logcat while stuck at boot animation so it is complete from startup to freeze. If you have time, no rush.
well, can't get log file to load. will keep trying. had to upload to mediafire acct as I could not attach it here.
logcat.txt
There is an issue with the site blocking certain .txt files according to content. Have to compress them to get past screening.
Akash23q2 said:
Just another ROM Built from source by me guys, I hope you all will like it.
View attachment 5387233
Project Sakura is a custom ROM based on Lineage OS, It tries to remain true to it while also providing some more functionality and UI changes. Its sole purpose is to provide a platform which is powered by Lineage and is more customisable than Lineage.
What Works:
•everything
Bugs:
•none
View attachment 5387249
ROM Download link:
Download | Alternate
View attachment 5387247
Source:
GitHub - lenovo-devs/android_device_lenovo_TBX304: lineage device tree for Lenovo Tab 4 10 (TB-X304)
lineage device tree for Lenovo Tab 4 10 (TB-X304). Contribute to lenovo-devs/android_device_lenovo_TBX304 development by creating an account on GitHub.
github.com
GitHub - lenovo-devs/android_device_lenovo_tb-common
Contribute to lenovo-devs/android_device_lenovo_tb-common development by creating an account on GitHub.
github.com
GitHub - lenovo-devs/android_kernel_lenovo_msm8953
Contribute to lenovo-devs/android_kernel_lenovo_msm8953 development by creating an account on GitHub.
github.com
GitHub - lenovo-devs/proprietary_vendor_lenovo
Contribute to lenovo-devs/proprietary_vendor_lenovo development by creating an account on GitHub.
github.com
View attachment 5387251
Android Version: Android 10
Kernel: Linux 3.18X
Based on: LineageOS
Status: Stable
Click to expand...
Click to collapse
sir, i have been using this rom from past 1 year and i can surely say it is the best rom but pls fix screen recording issue in this rom, am unable to share or record my screen.... and thats the only issue from my side, i hope you will fix it soon..
sir, pls fix screen recording issue.. am unable to record or share screen...
Yes, I know you are busy with studies and stuff. But can you please make a custom ROM of pixel experience for lenovo tab x304 f/l?. I would be grateful if you can make the file.
Hey
I thought of trying this on my tablet however the oem unlocking option is greyed out and when i try unlocking using adb, I get a message saying "oem unlocking is not allowed". Can someone help me in this
Infernape_35 said:
Hey
I thought of trying this on my tablet however the oem unlocking option is greyed out and when i try unlocking using adb, I get a message saying "oem unlocking is not allowed". Can someone help me in this
Click to expand...
Click to collapse
This guide works quite well.
tek3195 said:
This guide works quite well.
Click to expand...
Click to collapse
I had seen this but i get a message saying "Status 21 device is not ready" or status 6 as well. Really want to install the rom on this tab to keep it alive
Infernape_35 said:
I had seen this but i get a message saying "Status 21 device is not ready" or status 6 as well. Really want to install the rom on this tab to keep it alive
Click to expand...
Click to collapse
make sure you are in 9008 mode by running lsusb and run qdl commands as root
edit; just realized you get that message using the guide for getting bootloader unlocked, right ?
tek3195 said:
make sure you are in 9008 mode by running lsusb and run qdl commands as root
edit; just realized you get that message using the guide for getting bootloader unlocked, right ?
Click to expand...
Click to collapse
Yes, using that guide
I did make sure I was in 9008 but I didn't know about the commands. Will check again
Akash23q2 said:
Just another ROM Built from source by me guys, I hope you all will like it.
View attachment 5387233
Project Sakura is a custom ROM based on Lineage OS, It tries to remain true to it while also providing some more functionality and UI changes. Its sole purpose is to provide a platform which is powered by Lineage and is more customisable than Lineage.
What Works:
•everything
Bugs:
•none
View attachment 5387249
ROM Download link:
Download | Alternate
View attachment 5387247
Source:
GitHub - lenovo-devs/android_device_lenovo_TBX304: lineage device tree for Lenovo Tab 4 10 (TB-X304)
lineage device tree for Lenovo Tab 4 10 (TB-X304). Contribute to lenovo-devs/android_device_lenovo_TBX304 development by creating an account on GitHub.
github.com
GitHub - lenovo-devs/android_device_lenovo_tb-common
Contribute to lenovo-devs/android_device_lenovo_tb-common development by creating an account on GitHub.
github.com
GitHub - lenovo-devs/android_kernel_lenovo_msm8953
Contribute to lenovo-devs/android_kernel_lenovo_msm8953 development by creating an account on GitHub.
github.com
GitHub - lenovo-devs/proprietary_vendor_lenovo
Contribute to lenovo-devs/proprietary_vendor_lenovo development by creating an account on GitHub.
github.com
View attachment 5387251
Android Version: Android 10
Kernel: Linux 3.18X
Based on: LineageOS
Status: Stable
Click to expand...
Click to collapse
this is great. can you join our telegram group where we discuss about the issues and other stuff for the tablet. it would be really helpful for us. thank you. the link is
LOS Builds(Unofficial) [Lenovo Tablets]
You can view and join @LenovoTabletsLOS right away.
t.me