Database Develop

How to Disbale: Diabled: Cannot Connect GPS Error

Folks just bought Htc Diamond
Now whenever i connect to GPS randomly a annoying error msg pops out stating cannot connect
Dialed:
Cannot connect for an unknown reason. To check your connection settings and change them blah blah...
I want to disable this message as its very annoying

vishalkishnani said:
Folks just bought Htc Diamond
Now whenever i connect to GPS randomly a annoying error msg pops out stating cannot connect
Dialed:
Cannot connect for an unknown reason. To check your connection settings and change them blah blah...
I want to disable this message as its very annoying
Click to expand...
Click to collapse
Do you mean gps or gprs? if your talkin bwt ur gprs its common that a carrier will drop an internet connection when an antenna is full dont worry its not a problem just reconnect

hi
I am talking about GPS....when i connect gps software and it doesnt find a signal it shows that message. i know its not a problem / issue with the phone. i just want to turn that poping messge off as it is annoying and pops up in screen time and again

We are also getting this error message (and we are using GPRS). It has the effect of stopping our application interacting with the internet until the user presses the 'Dismiss' button.
Our application will automatically reconnect when the phone is able to get a GPRS connection. My question is can we stop the message/dialog appearing by capturing the event in our application? (We can't always wait for the user to clear the message)

exactly...its so frustrating clicking that "dismiss" button everytime

Same problem on the HTC Touch Pro.

Same problem here on ATT's stock Rom 1.95.502.5 WWE. It started about two weeks ago when I noticed my phone was dead when I got home from work (which is highly unusual for it to even go below 50% without me running to charge it). I keep noticing "Cannot Connect" bubbles from my [H] data symbol.
Dialed: wap.cingular
Cannot connect for an unknown reason. To check your connection settings and change them if needed, tap Settings. If the problem continues, reset your mobile device according to your manufacturer's documentation and try again."
Click to expand...
Click to collapse
The only way I could get rid of the problem was to do a soft reset with the stylus. About a week ago I got really good and disgusted with it and decided that I was going to try a new radio and see if that helps. I went with 12.12.25.19 and the matching .dll file. After doing that the error seemed to go away for 2-3 days. Now starting this past Friday afternoon I'm back to the constant cannot connect bubbles. I'm not even sure what program is trying to connect because MemMaid says none of them are open except TouchFlo!
At least with the new radio I can go into Settings > Communication and toggle in and out of airplane mode which fixes the problem for 30 minutes at a time.
I don't mind the pop-ups, I mind the fact they prevent my screen from fully going to sleep which is killing my battery life! My screen will dim with the pop-ups but it won't go completely off which gives me about 3-4 hours battery life if I don't check it. Now I'm a compulsive phone-checker (I feel like those crackberry addicts) just to keep turing the screen off!

[Q] WiFi Pairing (Xperia V)

Hey, I need a little help with this here.
1. I flashed Jelly Bean (9.1.A.0.490 Stock Generic-Intl) on my Xperia V yesterday. Before that, when I had ICS, I had paired my laptop and phone via WiFi, so that I could have access to the phone's data whenever, without having to run for the USB cable all the time.
2. Under "Trusted Devices" in Settings --> Xperia --> USB Connectivity it says there are no trusted devices (which is correct, considering that I have NOT paired my phone with my laptop after flashing).
3. Sometimes (especially after shutting down my laptop), in the notification bar I see that the phone is "Awaiting Connection" from my laptop (which is strange, given that I have NOT paired my phone with my laptop after flashing). Tapping on that notification does nothing. It is swipeable, though.
4. I tried to pair my laptop with my phone over WiFi after flashing and I get an error message (see the attached screenshot for the error) on the phone, while PCC says "Failed to connect over WiFi" (or something to that tune). (Now this is really weird, given that PCC should be able to read/write into the protected part of my phone's memory.)
5. I have long pressed the notification, and then tapped "App Info", which took me to the app in the Apps, under Settings. I cleared app data, and force stopped it. Then I restarted my phone, and tried to pair, with the same result. (In fact, the screenshot was taken after this attempt.)
Lastly, I have made some conclusions:
1. Somehow my phone thinks that it is paired with my laptop, because the message appears in the notification bar only after shutting down my laptop. However, I cannot see my phone in my laptop, nor see that the phone has connected with my laptop anywhere in the phone.
2. Solving this the easy way would require me to root my phone, and delete the file myself. But I don't want to root, not just yet. Maybe in some time, but not just yet.
Any ideas on how to fix this? Thanks in advance! (I promise, upon my honor, to hit thanks on all those posts that help!!)
Kartik.
Ps. I know it got kinda long, but I thought that it would be better to expose all my cards, for your convenience.

Solved
Ok. Here's what I did.
Rooted
Deleted
Thank you.

[Q] Can't get Gear Live to connect / stay connected

So I've got a new Samsung Gear Live from the Play Store. I'm attempting to pair the device to a Nexus 5 running stock 4.4.4.
When I turn on the Gear Live I'm prompted with selecting a language. I choose English US. Then i'm taken to the "Install Android Wear on your phone" Screen
At first this screen would show me the text "Gear Live 4AFV" (or something along those lines). However 9/10 (after rebooting or resetting the watch) it will simply show me "Gear Live" no 4 digit name.
Without the 4 digits showing the phone will not detect the bluetooth device to connect. On the off chance that it does show up and the phone is able to detect the watch, the pairing process can either work, or stall leaving both devices sitting at a "wait a moment while pairing" screen that never ends.
Lastly, if everything works and i'm able to pair the watch and phone. it will randomly disconnect and nothing I do will make it reconnect to one another.
Other things to note. Bluetooth has no issues on my phone with any other device.
I've reset the watch numerous times,
I've uninstalled the Android Wear app as well as any other watchfaces or launchers.
I've factory reset the phone.
Suffice it to say i'm almost certain there is a problem with the watch, the question is has anyone else experience this or anything similar with a Reset hasn't fixed the problem and is there possibly a solution to this problem that isn't a replacement.
Google has offered to replace the watch but I want to ensure I"m not missing something here.
thanks for any assistance in advance.

gear live 5.0 lollipop connection issues
jay slasher said:
So I've got a new Samsung Gear Live from the Play Store. I'm attempting to pair the device to a Nexus 5 running stock 4.4.4.
When I turn on the Gear Live I'm prompted with selecting a language. I choose English US. Then i'm taken to the "Install Android Wear on your phone" Screen
At first this screen would show me the text "Gear Live 4AFV" (or something along those lines). However 9/10 (after rebooting or resetting the watch) it will simply show me "Gear Live" no 4 digit name.
Without the 4 digits showing the phone will not detect the bluetooth device to connect. On the off chance that it does show up and the phone is able to detect the watch, the pairing process can either work, or stall leaving both devices sitting at a "wait a moment while pairing" screen that never ends.
Lastly, if everything works and i'm able to pair the watch and phone. it will randomly disconnect and nothing I do will make it reconnect to one another.
Other things to note. Bluetooth has no issues on my phone with any other device.
I've reset the watch numerous times,
I've uninstalled the Android Wear app as well as any other watchfaces or launchers.
I've factory reset the phone.
Suffice it to say i'm almost certain there is a problem with the watch, the question is has anyone else experience this or anything similar with a Reset hasn't fixed the problem and is there possibly a solution to this problem that isn't a replacement.
Google has offered to replace the watch but I want to ensure I"m not missing something here.
thanks for any assistance in advance.
Click to expand...
Click to collapse
I have the same connection issue but not until I updated it to Android version 5.0 that I started to get connection issues and the gear live was constantly doing a sync loop and it would not stay connected or send SMS messages.

How to get Tasker to *actually* connect/disconnect VPN?

I have a problem with my recently purchased Tasker app. I tried posting on the official Tasker forum (https://tasker.helprace.com/s1-general/problems/top) but after I would click submit, nothing would come up. If anyone knows how to get in contact with the developers other than leaving a negative review on the Play Store that would be much appreciated.
I have a Samsung Galaxy S9 (not rooted) running whatever the latest version OS (Pie I want to say?).
I have a simple Profile setup to Connect to VPN when Wifi is connected, and Disconnect from VPN when Wifi is disconnected (as an Exit task) using the OpenVPN Tasker Plugin.
On rare occasion, everything works as expected.
Unfortunately, the majority of the time, it will indeed recognize the correct state (Wifi Connected), however, it will not connect to the VPN. When I go into Tasker, I see the Profile is green text, and if I go to More>Run Log I can see that it says something to the extent of:
"Active 2 Wifi Connected" then "Start TaskService" then "Running 3 VPN Connect" then "OK 3.1 VPN Connect.com.ffrog8.openVpnTaskerPlugin\n***\n*!" then "ExitOK 3 VPN Connect" then "Stop TaskService" (this is all in reverse order, since I think the run log puts the newest events at the top, but this is how I read them from bottom up).
Tasker even says 1 Task running on the notification bar on my lock screen. However the VPN is not connected. If I go into Tasker, turn off that profile, then turn it on again (via the toggle switch on the right hand side), the VPN will connect as expected and the run log will say the same exact thing.
Likewise for the Exit Task - when I disconnect from the network Tasker seems to recognize the state just fine (evident in Run Log and notification icon in lock screen), however my VPN remains connected (well my guess is it must disconnect for a short period as I transition from Wifi to 4g).
I have tried waiting a while to see if it's just a time issue, but I could wait hours and it will never trigger one way or the other (VPN Connect or VPN Disconnect). I have tried different Wifi networks. The Wifi State Active = "Any". In Android Settings>Apps>Tasker>Battery the toggle for "Allow background activity" is set to on, Optimize Battery Usage is set to off. Likewise for OpenVpn Tasker Plugin.
*Joao or anyone have any ideas?
Many thanks.

Troubleshooting = Because a Piece of Code went
Sorry to say that it looks like I am the 1st reply, as I have no real training in coding or programming myself.
I too recently began to play with such though with the intent to install it on some family member's devices ? However, like you I have not been able to get my desired automation regular enough to share it. When I 1st downloaded Tasker (I think) it had something about a "community" to share & get help with as well as more.
Trying to be helpful I ran a quick search for the specific site & as usual, Google had to go overboard with the results. Still hoping this will help you sooner as they all focus on that particular program:
https://community.home-assistant.io/t/tutorial-using-the-new-auth-system-with-tasker/82423
Just wondering if all the changes to Android OS as a whole may also have an affect on something minor such as whatever we choose to do with "automation" programming? Have seen throughout various post's & news that sort of thing....

for any other poor soul with the same problem, I read a couple of obscure comments on the interweb that the OpenVPN plugin for Tasker is no longer functioning, and all must be run through the Open VPN Connect app (NOT Open VPN for Android app) using intents. I found a guide once, and am testing it now and will report back if it works more reliably. Thank you Lone wolf for your reply.

just to update the poor souls, using intents like I said seems to work more reliably in terms of connecting to VPN. The only problem is if you go out of wifi range, it disconnects, but then are back within wifi range quickly (like somewhere with bad wifi signal), it will not connect again for some reason.

Nokia 7 Plus TA-1062 - Cannot Cast/No device found when trying to cast

So as the title says, I can't use the cast/screen mirroring feature in phone. I just cannnot connect to any tv
Whenever I try to cast, it doesn't show any devices at all. Null. and using the button from the notification dropdown, it just searches endlessly.
Some notes:
1. No problem with network. No problem with TV. Other phones work just fine, and doesn't take more than a minute to find device.
2. I tried not only on my TV but on other TV's as well with cast feature. My TV is Hisense smart 39", 39A5605.
3. Already did several restarts, disabled active apps (like adguard), still same.
4. My phone is using the latest PIE update (official update but sideloaded)
5. Already tried connecting on the same WiFi network. Still didn't work. Other devices can connect to the TV without the need to connect on the same wifi network.
6. Already tried turning both mobile data and wifi while scanning. still nothing.
7. Already tried disconnecting current wifi connection (set network to 'forget) but left wifi on while scanning. Still no device found.
8. Already tried installing some apps (like Google Home app and other cast app). Nothing.
9. Already went to developer options and turned on 'Wireless Display Certification', but no additional options show up on my cast screen (like listening mode etc). Just plain nothing.
10. There's no three-dot menu on the cast screen that will show 'enable wireless display.' just a search icon on the top right and nothing more.
I really wanted to find a solution, but can't find a specific fix. I hope somebody here will help. Please. Please I'm desparate.
By the way, I know some will say I should do a factory resetting, but please understand if I say no for now. Because if I do, I'll lose a lot of settings and configuration (system-level and app-level), among other hassle it may incur.