Hi, i had installed TWRP and magisk in few months ago, and for some reason, i installed stock rom file on my device. But I realized that my device got unrooted.
So, i flashed the same twrp.tar that i used before, now my device keeps booting into twrp (even when i select reboot>system)
Help me, thx
Related
Hey everyone
I've been using the XT1053 Retail US Stock Lollipop Flashable ZIP without issue for quite a while, but decided to update to the modded version 2. So I flashed it, xposed, and supersu again. Booted up, everything was okay. But then it said I needed to update my supersu binary and that I didn't have root, so I went to reboot into recovery and flash supersu once more.
However, now I can't access TWRP and it merely says "no command"
Should I just try installing TWRP again or is there a way to see if it's still installed? It's weird that this happened after flashing a rom
edit: reflashed twrp recovery img, back to normal. Can't explain what caused this though
Hello, is it possible to install twrp permanently via flashtool?
I flashed twrp img with flashtool (select kernel to flash) but then my phone wasnt able to boot up, so I installed lineage os rom.
After that, I booted up to system without any problem. I restarted my phone to check the twrp recovery but I noticed that It reverted into the stock one.
I tried to install twrp via the twrp app, the app says it flashed successfully but when I boot up into recovery, my phone shows the stock one. Please help me someone.
nevermind, I managed to install twrp with rom toolbox app.
Hello,
I have been struggling to root my device. I have not wiped and rooted it in some time and now coming back to it again magisk keeps breaking my device.
I have clean flashed the latest android 9.0.0 build. I have flashed TWRP custom recovery 3.3.0 successfully. I have tried to flash magisk 3 times now and afterwards my phone wont boot. I originally used magisk manager to get the latest zip and patch my boot image. I then rebooted to to bootloader and ran fast boot flash boot patched_Magisk.img. This wiped out my twrp recovery and my phone wouldn't boot, i couldn't get back into twrp recovery. I reflashed latest 9.0 build and wiped everything. I flashed twrp again and tried to flash Magisk 20.0 from recovery. It was successful but again i couldn't boot into my phone and it eventually restarted back into recovery which i still had twrp this time. I then tried it again with 19.3 and the same thing happened. can anyone tell me what is going on here? What am I missing? I have been having reflash factory 9.0 build each time just to get it to remove the patched boot image and boot up again.
Was either the TWRP version or the two check boxes it has now to install twrp app as system. Installed 3.2.3-1 and didnt install the twrp app through the recovery check boxes and it worked.
Hi all,
I have a rooted redmit note 9 that was running the stock rom (EU version i believe as i am UK based) perfectly well for several months until today when then latest over the air update installed and my phone is now stuck in a bootloop where i can only access the custom PBRP recovery (installed from when i rooted previously). I can also access fastboot. I have tried wiping all data and cache etc, i have tried reflashing the magisk patched stock rom that previously worked, i have also tried flashing vbmeta that i flashed previously but still no luck. This is my only phone so I really need to get it working again.
I was about to try re-flashing the stock rom with SP tool but it tells me the scatter file is invalid.
Not sure what else to try now. I also note that when i PBRP loads up it always asks for a password however i dont have a password on the device.
Please could someone suggest something i could try?
ajadamjones87 said:
Hi all,
I have a rooted redmit note 9 that was running the stock rom (EU version i believe as i am UK based) perfectly well for several months until today when then latest over the air update installed and my phone is now stuck in a bootloop where i can only access the custom PBRP recovery (installed from when i rooted previously). I can also access fastboot. I have tried wiping all data and cache etc, i have tried reflashing the magisk patched stock rom that previously worked, i have also tried flashing vbmeta that i flashed previously but still no luck. This is my only phone so I really need to get it working again.
I was about to try re-flashing the stock rom with SP tool but it tells me the scatter file is invalid.
Not sure what else to try now. I also note that when i PBRP loads up it always asks for a password however i dont have a password on the device.
Please could someone suggest something i could try?
Click to expand...
Click to collapse
your devices is encrypted try flash other custom rom first then try revert to stock hope it help u out
Thanks very much for your response. Based on your advice i tried to flash the latest Kraken 11 Vanilla rom from this fourm, however after installing via TWRP now i can't even get into recovery anymore, just goes straight to fastboot.
Any other suggestions please?
I have now managed to get back in to TWRP and tried flashing lineage latest rom but still i am stuck in a boot loop taking me to fastboot this time.
Please can someone help suggest hwo i can get my phone working agian. At this point i dont care which rom i end up (custom or stock) with as long as i can get it to function again
If your device is rooted, you can NOT update the system using the OTA (over-the-air), or the device will be stucked in bootloop.
If your device is rooted, you need to update the system MANUALLY, using the fastboot or spflashtool.
I suggest to update the system using the fastboot.
Now, you need to flash the whole MIUI again, except userdata and you will have your device back.
For anyone with a asimilar problem i eventually managed to fix my issue by using miflash tool version 20180528 and flashing merlin_eea_global_images_V12.0.10.0.QJOEUXM_20210413.0000.00_10.0_eea_c4a9d5d7fc fastboot version which i downloaded from the xiami site.
I had to try this multiple times because the extraction of the file did not seem to be correct on the first attempts.
Hi, I recently thought of flashing Project Sakura or iOS ROM by Sayanu. And when I flashed TWRP I Formatted Data, Used universal forceencrypt disabler, and after booting to phone and then trying to go to recovery, my phone is now stuck in a bootloop and Red Text Saying Only Official Binaries can be Flashed. I went to SamMobile, got the zip file, flashed in Odin, then back to normal, I've reflashed Stock ROM for 7 times straight. Even then, TWRP Fails to load with the red text saying Only Official Binaries can be Flashed. Please help me, I need a custom ROM urgently.
RealMetafetamine said:
Hi, I recently thought of flashing Project Sakura or iOS ROM by Sayanu. And when I flashed TWRP I Formatted Data, Used universal forceencrypt disabler, and after booting to phone and then trying to go to recovery, my phone is now stuck in a bootloop and Red Text Saying Only Official Binaries can be Flashed. I went to SamMobile, got the zip file, flashed in Odin, then back to normal, I've reflashed Stock ROM for 7 times straight. Even then, TWRP Fails to load with the red text saying Only Official Binaries can be Flashed. Please help me, I need a custom ROM urgently.
Click to expand...
Click to collapse
Also, here's the model- SM-N950F
Currently Running Android 9.
Stock ROM from SamMobile.
Enable developer mode
Disable OEM lock in developer mode
Read about RMM little bit
Wait 7 days
Flash twrp
There are two encrypted partition the name I forget but you have to reformat it google before procedure
Then format phone
Install any custom ROM that you want
PS project sakura is end of life, lineage 19.1 is pretty stable