Hello.
I own an european realme gt2. Current software version: RMX3311_11.C.08_1080_202301111307.
I have been trying to downgrade to the last version of android 12 ( RMX3311_11.A.22_0220_202211010914 ) and I can't seem to make it work.
I downloaded the OTA package ( RMX3311_11.A.22_0220_202211010914 ) using realme ota tool and tried to install it using local install from the update menu on the phone -> I am getting a verification failed error.
Is there any method to downgrade to android 12?
Version C.08 is Android 13 and A.22 is Android 12 therefore authentication failed.
Rollback i found only for india RMX3312.
smirciz22 said:
Hello.
I own an european realme gt2. Current software version: RMX3311_11.C.08_1080_202301111307.
I have been trying to downgrade to the last version of android 12 ( RMX3311_11.A.22_0220_202211010914 ) and I can't seem to make it work.
I downloaded the OTA package ( RMX3311_11.A.22_0220_202211010914 ) using realme ota tool and tried to install it using local install from the update menu on the phone -> I am getting a verification failed error.
Is there any method to downgrade to andr
Click to expand...
Click to collapse
smirciz22 said:
Hello.
I own an european realme gt2. Current software version: RMX3311_11.C.08_1080_202301111307.
I have been trying to downgrade to the last version of android 12 ( RMX3311_11.A.22_0220_202211010914 ) and I can't seem to make it work.
I downloaded the OTA package ( RMX3311_11.A.22_0220_202211010914 ) using realme ota tool and tried to install it using local install from the update menu on the phone -> I am getting a verification failed error.
Is there any method to downgrade to android 12?
Click to expand...
Click to collapse
That's the reason I didn't update to Android 13 yet. That update notification is there for nearly one month and I'll let it stay there until a rollback package is available for rmx3311. Until now you cannot downgrade the European model to Android 12 since there is no rollback package. Only for rmx3312 Indian model it is available.
Why would you want to downgrade? A13 is working fine no issues for me.
Do a hard reset after update otherwise you might have some problems especially with battery standby.
karayemis said:
Why would you want to downgrade? A13 is working fine no issues for me.
Do a hard reset after update otherwise you might have some problems especially with battery standby.
Click to expand...
Click to collapse
This is the reason, battery life is bad compared with A12. I will try to do a hard reset.
smirciz22 said:
This is the reason, battery life is bad compared with A12. I will try to do a hard reset.
Click to expand...
Click to collapse
Have you already tried to do a hard reset? Was it somehow useful? Just asking because I'm experiencing same issue with battery drain after the latest update to C.08.
smirciz22 said:
Hello.
I own an european realme gt2. Current software version: RMX3311_11.C.08_1080_202301111307.
I have been trying to downgrade to the last version of android 12 ( RMX3311_11.A.22_0220_202211010914 ) and I can't seem to make it work.
I downloaded the OTA package ( RMX3311_11.A.22_0220_202211010914 ) using realme ota tool and tried to install it using local install from the update menu on the phone -> I am getting a verification failed error.
Is there any method to downgrade to android 12?
Click to expand...
Click to collapse
do you have the RMX3311_11.A.22 rom?
lestatab said:
do you have the RMX3311_11.A.22 rom?
Click to expand...
Click to collapse
RMX3311_A.22
hi ,still no rollback for the GT 2
The European version of the RMX3311 does not have a Rollbackpack available.
Stano36 said:
La version européenne du RMX3311 n'a pas de Rollbackpack disponible.
Click to expand...
Click to collapse
Incredible ! realme so bad !
I've recently bought a GT2, probably from a really old stock, which is on RMX3311_11.A.22 (this is already updated by me) and I might've been scammed, since the phone had fingerprints out of the sealed box, idk.
I've ran the OTA tool: realme-ota RMX3311EEA RMX3311_11.A.22_0220_202211010914 3 -r 3 -o
But it only returns a json for the next update, RMX3311_11.C.06_1060_202212011207. And the A12 update zip got deleted during installation, so... Is there another way to dump mine?
(Also thanks to the devs that they created a whole pip package and an installer, which couldn't detect or install python, so I had to bootup a VM just for the tool, because I was too lazy to patch the installer script or install manually. So I'm planning to rewrite it in dotnet to make it usable.)
k3rielit said:
J'ai récemment acheté un GT2, probablement d'un stock très ancien, qui est sur RMX3311_11.A.22 (c'est déjà mis à jour par moi) et j'ai peut-être été victime d'une arnaque, car le téléphone avait des empreintes digitales hors de la boîte scellée, je ne sais pas.
J'ai exécuté l'outil OTA : realme-ota RMX3311EEA RMX3311_11.A.22_0220_202211010914 3 -r 3 -o
Mais il ne renvoie qu'un json pour la prochaine mise à jour, RMX3311_11.C.06_1060_202212011207. Et le zip de la mise à jour A12 a été supprimé lors de l'installation, alors ... Existe-t-il un autre moyen de vider le mien?
(Grâce également aux développeurs qui ont créé un package pip complet et un programme d'installation, qui ne pouvaient pas détecter ou installer python, j'ai donc dû démarrer une machine virtuelle uniquement pour l'outil, car j'étais trop paresseux pour corriger le script d'installation ou installer manuellement. Je prévois donc de le réécrire en dotnet pour le rendre utilisable.)
Click to expand...
Click to collapse
no possible
Stano36 said:
The European version of the RMX3311 does not have a Rollbackpack available.
Click to expand...
Click to collapse
In the attempt of changing from rmx3311 to rmx3312, I used the oneplus updater app for Android 13 on my rmx3311 running still android 12 and surprise: it installed the rollback package ment for the Indian version.
So I changed my European rmx3311 to the Indian rmx3312 variant by using only the oneplus local updater app.
Now, I believe that by cross-installing a different region OTA rollback package my device lost IMEI and Baseband because it doesn't recognize anymore my SIM card.
I wanted to change to rmx3312 because the indiant variant have the possibility to unlock the bootloader.
Is there any chance I can recover my IMEI and Baseband?
Also try to install Full OTA RMX3311
Stano36 said:
Also try to install Full OTA RMX3311
Click to expand...
Click to collapse
That would be my first option.
But I would like to manage to preserve the Indian variant since it is the only one with the unlockable bootloader.
Also, I never had believed that it is possible to change region so easy. And having locked bootloader.
It has already been tried and the result was as you wrote. Reverting to the original version helped. For GT 2 Pro, the device model is the same (RMX3301). GT 2 changes the version of RMX3311 to RMX3312.
Stano36 said:
It has already been tried and the result was as you wrote. Reverting to the original version helped. For GT 2 Pro, the device model is the same (RMX3301). GT 2 changes the version of RMX3311 to RMX3312.
Click to expand...
Click to collapse
Then maybe I can unlock the bootloader on this variant (RMX3312) and after that I'll install the RMX3311 package. Maybe the bootloader will stay unlocked?!?
Changing the region via Full OTA will certainly not overwrite all partitions. Manifest:Image will be 1b:44 where 1b stands for India and 44 stands for Europe.
In such a situation, a little is enough and the brick is born.
Stano36 said:
Changing the region via Full OTA will certainly not overwrite all partitions. Manifest:Image will be 1b:44 where 1b stands for India and 44 stands for Europe.
In such a situation, a little is enough and the brick is born.
Click to expand...
Click to collapse
Thanks. So better to take no risk since there is not a free unbrick tool for these devices. And the bootloader cannot be unlocked even in the RMX3312 since i don't have a valid IMEI number.
So, to revert back to RMX3311 i must repeat the process using the Oneplus updater application? And what firmware should i install?
Right now i am on Android 13 for the RMX3312 since i have done the regular OTA update hopping it will solve something about the IMEI.
Related
Hello, I'm currently on CLT-L29 8.1.0.107 (C636) with a lock bootloader and noticed that on Huawei Firmware Finder, 8.1.0.107c (C636) is available and approved for my IMEI. However, neither the proxy nor DNS method works for me. It had worked for me in a previous Huawei phone so I'm fairly certain I did the correct steps.
Does anyone know if Firmware Finder supports Oreo 8.1 at currently?
What is the alternative method to flash stock ROM for my phone? I tried looking online but got confused with various different methods involving creating a "dload" folder in the root folder of internal storage.
Any help is much appreciated. Thanks!
Bump - Help needed please ..
Use desktop version. Download and use HuRupdater.
hello guys i have the same probleme with CLT-L29 (C33) (french) firmware finder dont work with the two different methode proxy and dns and hurupdater work only with twrp and i remove it and i relock the bootloader to do ota update so any solution ? sorry for my english :RÉ:RÉ
hunhool said:
Use desktop version. Download and use HuRupdater.
Click to expand...
Click to collapse
Thanks, I'm fully stock with locked bootloader, i don't think HuRupdater can work for me right?
It has been said a lot of times... Firmware finder doesn't work with oreo 8.1 and as we know until now will never work... So the only way is to wait for OTA update or download the firmware from FF, unlock bootloader, root, install costum recovery and with hurupdater install rom....
So is better to wait OTA
i see a method with a dload folder to the internal storage with inside the file update.app we must push button volume up and down and power and try to install it like this i will test and i come back
boussaboubou said:
i see a method with a dload folder to the internal storage with inside the file update.app we must push button volume up and down and power and try to install it like this i will test and i come back
Click to expand...
Click to collapse
Please do that because on a fully stock phone (no root, or unlocked bootloader) it seams to be the easiest way of installing a stock update. At least on paper. Please give as a review how did it go.
Sent from my Huawei P20 PRO
Bonjour mon ami malheureusement ne fonctionne pas j'ai l'installation de message système de redémarrage failed maintenant je redémarre et le système est comme avant je pense que nous devons attendre la mise à jour ota je parle avec un hommes avec le chat sur hicare et il me dit que cela peut prendre 2 mois pour le déploiements dans tous les appareils son dépendent de votre appareil imei donc nous devons attendre triste
In English... @boussaboubou
Hello
I live in Paris and I bought a NOTE 9 Dual Sim SM-N960F (exynos) on FNAC (french famous store) market place.
The device arrived from Honk KONG with OREO 8.1
Country CSC is XEU
Product code
SM-N960FZKAXEU
and CSC CP AP Versions are the same deployed in Pakistan (PAK):
CP N960FXXU2ARL2
CSC N960FOXM2ARK2
AP N960FXXS2ARL4
The device was perfectly working but no Android 9 Pie available on OTA.
So I flashed it with ODIN official ROM Android 9 PIE OXM versions France XEF, Europe XEU and even Pakistan PAK .
In all the 3 tentatives Pie and One ui was ok but the BaseBand no longer worked. The SIMs IMEI and the baseband were not present.
I had to go back to the original version 8.1 PAK and everything is working again.
How to upgrade it correctly without rooting it if possible?
Thank you for your answers.
Try wiping the cache partition and run the OTA download via the settings menu
Or updatemanually via smart switch
I wiped the cache partition but still no new version found on OTA in settin
iceepyon said:
Try wiping the cache partition and run the OTA download via the settings menu
Click to expand...
Click to collapse
THank you. But even after Wipe cash on OTA in settings menu no Pie version is found. Still say that last upgrade are installed in dec. 1 2018 (ie 8.1 Oreo)
Smart Switch does'nt find Pie upgrade
012512 said:
Or updatemanually via smart switch
Click to expand...
Click to collapse
Thank you BUT When I link smart switch I've exactly the same message that in settings menu the system is already upgraded
In that case download Kies from Samsung's website onto your computer and connect your device to your computer. Then use Kies to update your OS
Probably this not depends from the app you use.
iceepyon said:
In that case download Kies from Samsung's website onto your computer and connect your device to your computer. Then use Kies to update your OS
Click to expand...
Click to collapse
Thank you I will try by I'm quite sure that this doesn't depend from the application used to upgrade (OTA or Smart Switch or Kies). Seems that there is not a valid Pie version for my device ; and when I reset to factory and flashed the Pie versions in all cases the baseband was not working. But I don't know why.
ghirighiz said:
Hello
I live in Paris and I bought a NOTE 9 Dual Sim SM-N960F (exynos) on FNAC (french famous store) market place.
The device arrived from Honk KONG with OREO 8.1
Country CSC is XEU
Product code
SM-N960FZKAXEU
and CSC CP AP Versions are the same deployed in Pakistan (PAK):
CP N960FXXU2ARL2
CSC N960FOXM2ARK2
AP N960FXXS2ARL4
The device was perfectly working but no Android 9 Pie available on OTA.
So I flashed it with ODIN official ROM Android 9 PIE OXM versions France XEF, Europe XEU and even Pakistan PAK .
In all the 3 tentatives Pie and One ui was ok but the BaseBand no longer worked. The SIMs IMEI and the baseband were not present.
I had to go back to the original version 8.1 PAK and everything is working again.
How to upgrade it correctly without rooting it if possible?
Thank you for your answers.
Click to expand...
Click to collapse
explain exactly how you flashed pie with odin.
including version of odin and each of the files used
bober10113 said:
explain exactly how you flashed pie with odin.
including version of odin and each of the files used
Click to expand...
Click to collapse
hi I send u a private message...it s gonna easier in french
No Base band
bober10113 said:
explain exactly how you flashed pie with odin.
including version of odin and each of the files used
Click to expand...
Click to collapse
In french as you suggest:
STEP 1
version Odin3-v3.13.3
La version officielle utilisés pour flasher est une multi CSC XEF
N960FXXS2CSC1
XEF Date du build 2019-03-04
CSC_OMC_OXM_N960FOXM2CSA7_CL15193909_QB21675069_REV00_user_low_ship.tar.md5
CP_N960FXXU2CRLT_CP11538160_CL15091941_QB21292166_REV00_user_low_ship.tar.md5
BL_N960FXXS2CSC1_CL15193909_QB22378085_REV00_user_low_ship.tar.md5
AP_N960FXXS2CSC1_CL15193909_QB22378085_REV00_user_low_ship_meta_OS9.tar.md5
A la fin PIE et ONE UI ok mais pas de Baseband et IMEI sim
Idem avec la version multi csc XEU
STEP 2
J'ai enlevé les protections qui étaient on
fap lock: on
oem lock: on
je suis rentré en mode développeur et j'ai activé le déverrouillage OEM avec effacement des données (j'avais le backup) réinitialisation etc .
Maintenant nom du CSC firmware est toujours XEU, mais le nom du CSC actuel a changé et il est SM-N960FZKAXEF, le pays du CSC donc est devenu France et les protections sont OFF.
Cependant pendant la réinitialisation ou manuellement dans les paramètres MAJ logiciel il reste toujours sur la même version 8.1, il dit qu'il est à jour et il ne trouve pas la version 9. Donc pour l'instant rien n'a changé de ce point de vue. Je ne sais pas pourquoi.
Dois-je chercher à flasher la rom avec la 9 PIE XEF multi CSC officielle.?
Dans ce cas Avec ODIN il faut mettre le Home CSC ou le CSC et refaire tout le chargement config?
Faut-il il faire un wipe data après le flash rom?
Merci beaucoup.
Bien cordialement
ghirighiz said:
In french as you suggest:
STEP 1
Click to expand...
Click to collapse
remove both google and sam accounts from phone and wipe data. and remove sim card.
get samfirm 0.3.6 and download BTU firmware.
flash as you did earlier with the multiple parts( for csc choose csc.md5)
after let it boot to initial setup and shut it down again insert sim and check imei
Why BTU?
bober10113 said:
remove both google and sam accounts from phone and wipe data. and remove sim card.
get samfirm 0.3.6 and download BTU firmware.
flash as you did earlier with the multiple parts( for csc choose csc.md5)
after let it boot to initial setup and shut it down again insert sim and check imei
Click to expand...
Click to collapse
Thank you so much,
I would follow the procedure.
however I've a question:
why I've to use BTU when for my device the original firmware is XEU and the today is XEF and I'm in France?
Thanks
ghirighiz said:
Thank you so much,
I would follow the procedure.
however I've a question:
why I've to use BTU when for my device the original firmware is XEU and the today is XEF and I'm in France?
Thanks
Click to expand...
Click to collapse
btu is unbranded UK firmware. hoping that will work.
once you successfully back on PIE, in odin just flash home_csc.md5 no need the other files.
OK Thanks
bober10113 said:
btu is unbranded UK firmware. hoping that will work.
once you successfully back on PIE, in odin just flash home_csc.md5 no need the other files.
Click to expand...
Click to collapse
OK Thanks
ghirighiz said:
OK Thanks
Click to expand...
Click to collapse
forgot to specify to flash home_csc from XEU
also as a good measure, re download xeu with samfirm tool 0.3.6
it will be the latest.
bober10113 said:
forgot to specify to flash home_csc from XEU
also as a good measure, re download xeu with samfirm tool 0.3.6
it will be the latest.
Click to expand...
Click to collapse
Thank you but
I loaded the multi-csc PIE generic XEF version found with samfirm and I've followed your procedure
but unfortunately the problem is still exactly the same . Non Baseband no Sim Imei no phone .
still no base band
ghirighiz said:
Thank you but
I loaded the multi-csc PIE generic XEF version found with samfirm and I've followed your procedure
but unfortunately the problem is still exactly the same . Non Baseband no Sim Imei no phone .
Click to expand...
Click to collapse
I don't presume that loading generic multi CSC BTU ou XEU anything could change
ghirighiz said:
I don't presume that loading generic multi CSC BTU ou XEU anything could change
Click to expand...
Click to collapse
nothing to loose by trying.
2 things might be happening:
either an issue with efs for some reason or your modem(CP) isn't getting flashed properly.
try to flash cp.md5 from last working firmware
has your phone ever been rooted? in dl mode, what is status of knox ?x?
also is frp at off?
you are flashing all 4 md5 files right?
so flash BTU:
BL
AP
CP
CSC
and post odin log after it finishes flashing
bober10113 said:
nothing to loose by trying.
2 things might be happening:
either an issue with efs for some reason or your modem(CP) isn't getting flashed properly.
try to flash cp.md5 from last working firmware
has your phone ever been rooted? in dl mode, what is status of knox ?x?
also is frp at off?
Click to expand...
Click to collapse
Hi
The phone has never been rooted, checked in DL, and I put locks off . I've flashed the 4 files many times (now I've do the same with Xeu and BTU a ) no problem or error in flashing.
ON other side I guess that in adapting in a bad way for European market a device with 8.1 versions for Pakistan the vendor has "freezed" the possibility to change country SIM EMEI in updating.
I have seen this problem description somewhere and diagnostic is " go to Samsung center", but I don't know any detail.
Unfortunately I have to travel out of France tomorrow so I prefer now to stay with a stable version 8.1 where modem works correctly.
When I will be back I will ask to a Samsung center to fix. The device is under warranty I have a french invoice (FNAC).
THank you so much for your assistance.
Best
Giorgio
ghirighiz said:
Hi
The phone has never been rooted, checked in DL, and I put locks off . ON other side I guess that in adapting in a bad way for European market a device with 8.1 versions for Pakistan the vendor has "freezed" the possibility to change country SIM EMEI in updating.
I have seen this problem description somewhere but I don't know any detail.
Unfortunately I have to travel out of France tomorrow so I prefer now to stay with a stable version 8.1 where modem works correctly.
When I will be back I will ask to a Samsung center to fix. The device is under warranty I have a french invoice (FNAC).
THank you so much for your assistance.
Best
Giorgio
Click to expand...
Click to collapse
ok good luck.
Hello From México,
Glad to share a new update with the DECEMBER security patch. GMS WORKING FINER FOR ME.
My Phone version is (C605)
saitron said:
Hello From México,
Glad to share a new update with the DECEMBER security patch. GMS WORKING FINER FOR ME.
My Phone version is (C605)
Click to expand...
Click to collapse
Como arreglaste lo de las actualizaciones ota o nunca le hiciste downgrade?
Enrike.696 said:
Como arreglaste lo de las actualizaciones ota o nunca le hiciste downgrade?
Click to expand...
Click to collapse
Si hice Downgrade, es necesario regresar a la version original del telefono. Si la cambias no obtendras actualizaciones jamás. BUSCTA TU REGION Y BAJA EL FIRMWARE CORRECTO.
saitron said:
Si hice Downgrade, es necesario regresar a la version original del telefono. Si la cambias no obtendras actualizaciones jamás. BUSCTA TU REGION Y BAJA EL FIRMWARE CORRECTO.
Click to expand...
Click to collapse
El mio es at&t mexico tengo la c605 pero como se cual era la original?
Enrike.696 said:
El mio es at&t mexico tengo la c605 pero como se cual era la original?
Click to expand...
Click to collapse
Google all Huawei firmware y tu versión, te pasaría la liga pero no la tengo a la mano ya. Esta fácil.
Saludos
saitron said:
Google all Huawei firmware y tu versión, te pasaría la liga pero no la tengo a la mano ya. Esta fácil.
Click to expand...
Click to collapse
saitron said:
Hola a todos, no se si ya pudieron solucionar esto, de igual forma yo también hice downgrade a mi dispositivo y ahora no puedo recibir actualizaciones, me gustaría saber de que forma puedo solucionarlo. Saludos
Click to expand...
Click to collapse
Hello everyone, I don't know if you could already solve this, in the same way I also downgraded my device and now I cannot receive updates, I would like to know how I can solve it. Greetings
v3nomEd said:
Hello everyone, I don't know if you could already solve this, in the same way I also downgraded my device and now I cannot receive updates, I would like to know how I can solve it. Greetings
Click to expand...
Click to collapse
Just use hisuite proxy and upgrade to another 10.1.xxx version first and afterwards i am able to receive all the OTA upgrades to emui 11 already
I used the firmware from https://www.firmfinder.ml/.
wievi said:
Just use hisuite proxy and upgrade to another 10.1.xxx version first and afterwards i am able to receive all the OTA upgrades to emui 11 already
I used the firmware from https://www.firmfinder.ml/.
Click to expand...
Click to collapse
Thank you for the fast response, do i have to downgrade it or upgrade directly to 11.xxx version?
bc i have these two options:
ELS-N04 10.1.0.1 (C605R2) or ELS-N04 11.0.0.3 (C605R2)?
Thank you
v3nomEd said:
Thank you for the fast response, do i have to downgrade it or upgrade directly to 11.xxx version?
bc i have these two options:
ELS-N04 10.1.0.1 (C605R2) or ELS-N04 11.0.0.3 (C605R2)?
Thank you
Click to expand...
Click to collapse
Which version your firmware is using now? For me, my firmware was downgraded to 10.1.0.131 because i need to install GMS but after that, i was unable to receive OTA. So that's why i used hisuite proxy to upgrade to 10.1.0.182 and after upgraded, i can receive the OTA again to 11.x
Note: Mine is on different region C636 so the firmware version might be different as well
wievi said:
Which version your firmware is using now? For me, my firmware was downgraded to 10.1.0.131 because i need to install GMS but after that, i was unable to receive OTA. So that's why i used hisuite proxy to upgrade to 10.1.0.182 and after upgraded, i can receive the OTA again to 11.x
Click to expand...
Click to collapse
Mine is 10.1.0.131, actually i don't care if i cannot use GMS anymore, some of the apps that i use i can install it and use normally now. In FirmFinder i can download it both, but i don't know how to do it (at all) i don't remember how i did it the first time xD but i can see a video,
v3nomEd said:
Mine is 10.1.0.131, actually i don't care if i cannot use GMS anymore, some of the apps that i use i can install it and use normally now. In FirmFinder i can download it both, but i don't know how to do it (at all) i don't remember how i did it the first time xD but i can see a video,
Click to expand...
Click to collapse
Normally, i prefer to upgrade to latest 10.1.x version before upgrading to 11.x. So not sure if upgrading directly to 11.x might cause some issue or not. Have you tried using hi suite(without hi proxy) to upgrade?
wievi said:
Normally, i prefer to upgrade to latest 10.1.x version before upgrading to 11.x. So not sure if upgrading directly to 11.x might cause some issue or not. Have you tried using hi suite(without hi proxy) to upgrade?
Click to expand...
Click to collapse
Yes, and it says "your system has the latest version" or something like that, the same at the phone. I'm trying to write my best english, sorry if I don't give myself a sense. In the picture is the versions of my model.
v3nomEd said:
Yes, and it says "your system has the latest version" or something like that, the same at the phone. I'm trying to write my best english, sorry if I don't give myself a sense. In the picture is the versions of my model.
Click to expand...
Click to collapse
Yeah that should be the firmware compatible with your phone region. Probably you can try upgrading to 11 using hi suite proxy but make sure to watch the youtube tutorial on how to upgrade to 11. For me, i upgraded to 11 using OTA
wievi said:
Yeah that should be the firmware compatible with your phone region. Probably you can try upgrading to 11 using hi suite proxy but make sure to watch the youtube tutorial on how to upgrade to 11. For me, i upgraded to 11 using OTA
Click to expand...
Click to collapse
Thanks, I tried a couple minutes ago and when the process begin in my phone it canceled, tomorrow morning I'll check with another version and see if i can upgrade it with that way.
Thabk you very much, keep u posted.
wievi said:
Yeah that should be the firmware compatible with your phone region. Probably you can try upgrading to 11 using hi suite proxy but make sure to watch the youtube tutorial on how to upgrade to 11. For me, i upgraded to 11 using OTA
Click to expand...
Click to collapse
Hi Wievi, i tried to install some firmwares, 10.150, 10.135, 11.168 and is the same, when the process begins in my phone restarting an error appears and restart the system. I called to Huawei support and she says that there's not update yet to my phone searching it with the serial number. i don't know if i need to downgrade it but also don't know what's my system base firmware xD
wievi said:
Normally, i prefer to upgrade to latest 10.1.x version before upgrading to 11.x. So not sure if upgrading directly to 11.x might cause some issue or not. Have you tried using hi suite(without hi proxy) to upgrade?
Click to expand...
Click to collapse
I think that Huawei use a specific firmware version during transition to/from one EMUI major update/downgrade. You can not jump from the oldest EMUi10.1 to newer EMUi11 in one step.
Is there a way to know the original region code so get the right firmware? I'm stucked at c605
C605 is Latin America.
Here is the link.....
https://www.google.com.bd/url?sa=t&source=web&rct=j&url=https://forum.xda-developers.com/t/huawei-regional-codes.3740473/&ved=2ahUKEwixiZH_qPzwAhUyILcAHSU1C3MQFjACegQIGBAC&usg=AOvVaw3LdmV9lZtc8PpoxYO9zs4W&cshid=1622752825235
Hi!
Got update yesterday evening, didn't remember, what version, but after restart ÜP40 Pro was stuck on boot screen , HUAWEI text on it and so it was....After 2 hours manual restarting showed me screen "something went wrong, save your data on usb"...Some data saved - photos and videos, but no apps. Downgrading at the moment to .131 to install GMS.
Hi,
I just bought this model and i'd like to know which firmware is better.
Currently it have installed the one in the picture marked in red
Should you recommend to install the other one above?
or even better the china version?
2nd question: Is it possible to root one of these stock rom?
hello k44mos, you find your firmware here https://www.sammobile.com/samsung/galaxy-s10/firmware/SM-G9730/TGY/ since your S10 G973O is equipped with an Asian motherboard so not European
meric57 said:
hello k44mos, you find your firmware here https://www.sammobile.com/samsung/galaxy-s10/firmware/SM-G9730/TGY/ since your S10 G973O is equipped with an Asian motherboard so not European
Click to expand...
Click to collapse
Thanks for the reply but that was not my question.
EDIT: I downloaded the update and now i have the:
Hong Kong2022-05-17G9730ZHU6HVE112
Now the only question is if that possible to root this stock rom.
Thank you
Oui, vous pouvez rooter avec magisk 23.4 comme expliqué https://forum.xda-developers.com/t/...0-series-android-12-one-ui-4-1-stock-firmware .4394629 / ou https://topjohnwu.github.io/Magisk/install.html
Just have your official firmware on your pc G973O you modify your AP with magisk and you flash with odin.
meric57 said:
Oui, vous pouvez rooter avec magisk 23.4 comme expliqué https://forum.xda-developers.com/t/...0-series-android-12-one-ui-4-1-stock-firmware .4394629 / ou https://topjohnwu.github.io/Magisk/install.html
Just have your official firmware on your pc G973O you modify your AP with magisk and you flash with odin.
Click to expand...
Click to collapse
First link doesn't work.
Do you have a guide link too?
Thanks!
Hello,https://forum.xda-developers.com/t/...y-s10-exynos-g970f-g973f-g975f-g977b.3924856/
GOOD MORNING ALL
I have a big problem, my galaxy note 8 N950F is empty, it has no more operating system, it refuses any custom or stock roms, I tried everything but nothing to do, can you help me , thank you my friends , it is VERY URGENT FOR MY CLIENT
I had to see, install lineage 17, but impossible to have oem, so I deleted everything, since in recovery mode I tried on sd card to install several roms, but it refuses everything
hello what did you do to get here?
what android version were you on before getting here?
cmoinanar630 said:
GOOD MORNING ALL
I have a big problem, my galaxy note 8 N950F is empty, it has no more operating system, it refuses any custom or stock roms, I tried everything but nothing to do, can you help me , thank you my friends , it is VERY URGENT FOR MY CLIENT
I had to see, install lineage 17, but impossible to have oem, so I deleted everything, since in recovery mode I tried on sd card to install several roms, but it refuses everything
Click to expand...
Click to collapse
you need to install stock rom and re-root and then try installing any other rom, as long as he phone in not bricked.
pendor24 said:
bonjour qu'as-tu fait pour arriver ici?
tu étais sur quelle version android avant d'arriver ici
Click to expand...
Click to collapse
I was under the HADES rom but it had a very bad connection to the networks, my client kindly sent it back to me, then at home, I did the wipes and after impossible to install anything, I had to erase the internal memory? a bad handling I think, here last night I flashed the twrp 3.6.09.0, then I downloaded the rom with samfirm N950FXXUGDVG5 and incredible on odin everything worked, I no longer understand anything, but here everything works, I'm going use it this weekend before sending it back dear my client, like what the HADES rom has trouble with the networks
Thanks to you
Sincerely
pendor24 said:
bonjour qu'as-tu fait pour arriver ici?
tu étais sur quelle version android avant d'arriver ici?
Click to expand...
Click to collapse
note 8 sous android 9
cmoinanar630 said:
note 8 sous android 9
Click to expand...
Click to collapse
maintenant l'appareil photo avant ne marche plus , pourtant je l'ai changer , mais rien a faire , je comprend plus rien