So I had Pixel Experience on my Note 5. I decided i did not like it, so I flashed stock rom on Odin without knowing the region. I live in Dubai so the region I selected was "XSG". I flashed it on Odin, and it is now stuck on the bootloop. Please help. Did I do something wrong??
Diagnostic Details (if this helps)
Version of Odin I used: Odin 3B PatcheD/ModdeD - v3.14.1
Odin had frozen/not responding during the flash process, but it flashed fine on Odin.
Related
Hi,
Trying to unbrick my phone is driving my mind totally mad!
So far I have tried installing several CF roots with ODIN and tried to reflash the ROM with I9000XWJS3. All of them lead to no success, just a black screen and the phone vibrates every 10 seconds.
Trying to find information on this forum is easy.. but trying to put all those pieces of information together is somewhat impossible for me.
I am from the Netherlands and bought this SGS 2nd hand from someone who has rooted it. However I have no idea how that person has done that with which piece of software. I also have no idea what build number it currently has. However I do know there is no sim-lock, because the owner bought it from the KPN telecom provider and has no problems using a sim-card from T-mobile.
I am able to get into the download mode (3 button combo thingy) and Odin can successfully flash the ROM of my SGS.
Now what I need to know is which PIT, ROM, CSC, Modem files etc. I need to make this phone working again. Preferably I'd like to run it on Froyo 2.2.1 with Android market installed.
try downloading the firmwares from samfirmwares.com
http://forum.xda-developers.com/showthread.php?t=846913 download the firmware from here. preferably JM8 flash that thru odin with PIT and REPARTITION and that should do the trick. then you can flash over a new rom like JPY (2.2.1)
I've successfully unbricked my Galaxy with the 'Froyo ROM that does not brick' here - "h t t p://w w w.4shared.com/file/dJiyRz3v/EUGENE373_SamsungS_Froyo_PDA.html" (Can't post as actual link because I'm not allowed to yet, just copy and paste the bit between the speech marks into a new window and remove the spaces).
As per previous poster's instructions; flash through Odin as PDA with PIT and REPARTITION (Original instructions for this ROM said not to use repartition but that didn't work for me)
You should then be able to Odin flash any new rom you like, but when you do DON'T use REPARTITION or PIT, otherwise your phone will just get bricked again.
I feel that flashing the firmwares which needs partition is safer and better than those that isn't....for my case I prefer flashing JPU than JPY or JPX...it works every time I got my phone semi-bricked, hehe...
Hello,
Yesterday i had similar problem ater trying to flash Darky's resurrection edition.
After the boot i had a black screen just like you.
Here's how i finally unbricked:
Download
- PIT 803 file multiupload.com/6JX2LEUCTY
- I9000XWJS3 pakcage from samfirmware.com (european for my case), PIT803 version : hotfile.com/dl/100247999/301207f/I9000_XEN_I9000XWJS3.rar.html
(The pwd is samfirmware.com)
The package I9000 XEN I9000XWJS3 contains 3 file (which i think is the key, trying to repartition with only one PDA file seem to soft brick the phone)
In Odin, tick repartition, for PIT select the PIT 803 file
For PDA, choose I9000XWJS3-REV03-ALL-low-CL830616.tar.md5
For CSC, choose GT-I9000-CSC-XENJS3.tar.md5
For PHONE, choose MODEM_I9000XXJPY.tar.md5
After the flash, your phone will reboot in rescue, unplug it and do a wipe/factory reset, then reboot and you should be ok.
The goal was only to unbrick my phone, but i'm totally happy with this firmware for now, my phone is a lot faster than before, and i don't feel the need of a lagfix anymore!!
Please note that this is just my experience, and you should wait for more advanced users help.
Hello friends
I have searched and found a lot of threads but my obsession has not been solved.
I am on DDJPA indian GB flashed via Odin.I want to get back to stock froyo so that i can update to GB via odin.[Told u so!It is an obsession like having a perfect one!!! and i have a glimmer of hope that our Tab may get official ICS and i want it via kies but kies now does not recognise my Tab]
I have downloaded stock indian froyo[the one i had] from samfirmware.I have also downloaded flashing manual also from samfirmware.It says that i should flash pit file first with repartition and then remove battery & then go to download mode again to flash PDA tar file without repartition.
I am totally lost here.
I tried to flash with pit and PDA Tar file with repartition.It flashed successfully but when it boot was stuck at Samsung logo for about 30 minutes.[Should i have waited some more time at samsung logo flashing stage?]
Then i re-flashed with DDJPA GB tar with pit thro odin and revived the Tab.
Can anybody give me step by step instructions regarding how to flash via odin to get back to stock?
I need help with flashing stock firmware. Well, I flashed my device with some turkish firmware who had 4 files and I did that via Odin. When I realised that I have turkish firmware I downloaded stock version which consists only 1 file and tried to flash my device trough Odin (followed procedure for flashing with one file) and it wont work. All I get is endless reboot loop on my device. What should I do? Please help!
bpodnar said:
I need help with flashing stock firmware. Well, I flashed my device with some turkish firmware who had 4 files and I did that via Odin. When I realised that I have turkish firmware I downloaded stock version which consists only 1 file and tried to flash my device trough Odin (followed procedure for flashing with one file) and it wont work. All I get is endless reboot loop on my device. What should I do? Please help!
Click to expand...
Click to collapse
Try again with wipe data/chace and wipe dalvik cache(from advance from in CWM)
Reflesh your stock firmware.
I high recommend you to rewrite stock 2.3.4 XXXXKPI(European)or specific for you region.
Anyway more details in this thread from Sammobile
KPI version have 4 files but was by far best version for me that i've used.
Also be carefull to load corect packs for boot/csc/modem/phone:
http://fulga.u-s.ro/fotos/android/incarcare_rom_in_Odin.png
If you are european shall not care if it is Turkish or Russian,just change leanguage.
I want to reflash my phone because KIES wont upgrade stock firmware after I flashed with Odin. It says that "this device cannot upgrade over KIES". It's common problem and I heard that people were solving that with reverting original stock firmware for their country. I dont know exactly am I right but I wanna try. Thanx!
Its very buddy, you can search it on this forum. You can find it here.
Okay. Some history to start with...
I got Chinese version of Galaxy Note which runs i9220 ROM and been trying to flash with HK/EU ROM last several days but out of luck so far. (And whenever failed, I re-loaded stock ROM found from Samsung-updates.com site for i9220. It then worked fine but still with original problem unsolved.
I then tried one last method that I saw someone succeed flashing Chinese ROM via use of PIT file came from one of the other downloads.. yeah, I didn't check the source PIT came from before try... which is my bad.
Without confirming it, I instantly located "u1_02_20110310_emmc_EXT4.pit" that's packaged with odin 1.85 and carelessly gave a try.
And now... my precious GalaxyNote became the most expense brick in my house and am looking for professional help from you guys.
Steps I did before bricking and tried:
1. Load GalaxyNote in Download mode (volume down + home + power)
2. Launch Odin 1.85 and no change to default setting. (Check mark on #Auto Reboot & #F.Reset Time, uncheck on #Re-Partition & #Flash Lock)
3. Set PIT to "u1_02_20110310_emmc_EXT4.pit"
4. Set PDA to "N7000XXKL7_N7000OXAKL7_N7000XXKL7_HOME"
5. Click #Start
Soon after around 5%, it failed.
I then attempted to restore factory ROM via usual way - doing same as above except no PIT this time and choosing original stock ROM for i9220.
It failed! OMG...
I then tried again (#1 ~ 5 above) but this time, check on #Re-partition for luck. Still no luck!
I then downloaded Heimdall1.3.1 and tried to extract PIT file but the tool fails as well and gives "ERROR: Failed to access device. libusb error: -12".
At all times, GalaxyNote screen shows android icon with 'Downloading... Do not turn off target!!'. And the device can also be seen from odin.
Soon as turn off galaxynote and disconnect from computer, it shows 'Software Update Fail' message.
How I can restore to original factory setting? And if possible, how I can restore to EU or Hong Kong ROM?
My Chinese friend has the same device as mine. In this case, will Heimdall tool help extracting PLT from it and help restoring my device via odin?
Your professional help is sincerely appreciated!!!!
Resolved
Using "Q1_20110914_16GB.pit" and re-partition check from odin while flashing to original stock rom has resolved an issue.
Referred from following thread.
http://forum.xda-developers.com/showthread.php?t=1533214
Never use pit and do not tick repartion when flashing.
bootloader?
U are fine. It is a recovery issue and not a bootloader. Install custom recovery and flash stock firmware w odin. Oh yea, and profit.
Toolmighty said:
U are fine. It is a recovery issue and not a bootloader. Install custom recovery and flash stock firmware w odin. Oh yea, and profit.
Click to expand...
Click to collapse
Why do you revive an old thread? The user has resolved it the day after his problem.
Hello all developers
the problem start when my friend ask me to fix his mobile
the first look to the mobile is
when i click power on it's show Samsung logo with this word at the left top( recovery booting ... )then reboot after 2 seconds at-least
i have download the latest official Rom 5.1.1 from sammobile
N910TUVU2DOK2_N910TTMB2DOK2_N910TUVU2DOK2_HOME
after flash with odin i remember that is must complete the installation after first reboot with android logo but there is nothing happened !! its always reboot with the same word ( recovery rebooting )
I have tired to flash many Roms
Many BL
Many Modem
try to flash PIT File and the same
try Emergency with Kies and nothing changed
Kies give me this information when i put the model
PDA : OK2 / CSC : OK2 / PHONE : OK2 (TMB)
the all info about this mobile :
Model : SM-N910T
S/N : RF8FC131QYY 14.12
IMEI : 356095064430028
when i enter Odin Mode thats appear
ODIN MODE (HIGH SPEED)
PRODUCT NAME : SM-910t
CURRENT BINARY : SAMSUNG OFFICIAL
SYSTEM STATUS : CUSTOM
REACTIVATION LOCK : OFF
KNOX WARRANTY VOID : 0x1 (4)
QUALCOMM SECUREBOOT : ENABLE (CBS)
RP SWREV : S1, T1 , R1 , A2 , P1
SECURE DOWNLOAD : ENABLE
UDC START
please help me to fix it with any rom ... I can't go recovery mode but i can go download mode with ODIN
Any help please
i have the same issue but im on verizon. Also kies doesnt recognize my phone and I can't get to recovery. Any help would be appreciated. otherwise i just have an expensive paperweight.
Download n910t pit file and flash the pit file with the firmware. Make sure repartiton is checked. And let it reboot without pulling the the usb out.. the first thing it always does after odin to stock is reboot to recovery....are you getting any errors when you try to flash the firmware? Download this firmware. It is untouched full stock wipes everything
https://mega.nz/#!asRzgCYb!f8ssb_v6zDxYJ8_u1ygzpothj1arjRmMdM_opGz8QO0
Had the same issue i tried all kinds of roms stock and custom nothing seemed to work bought a new battery didnt make a diff now my phone is dead
noob4598 said:
Download n910t pit file and flash the pit file with the firmware. Make sure repartiton is checked. And let it reboot without pulling the the usb out.. the first thing it always does after odin to stock is reboot to recovery....are you getting any errors when you try to flash the firmware? Download this firmware. It is untouched full stock wipes everything
https://mega.nz/#!asRzgCYb!f8ssb_v6zDxYJ8_u1ygzpothj1arjRmMdM_opGz8QO0
Click to expand...
Click to collapse
Can you share PIT file for 910t? My phone is just keep bootcycle no matter what I do with ODIN, and try to flash ROM after ODIN, it bombs out, and boot cycle...
Thanks.
I am stuck with the same thing
any help would be great I am some what of a noob to this
Anyone had luck solving this problem?
noob4598 said:
Download n910t pit file and flash the pit file with the firmware. Make sure repartiton is checked. And let it reboot without pulling the the usb out.. the first thing it always does after odin to stock is reboot to recovery....are you getting any errors when you try to flash the firmware? Download this firmware. It is untouched full stock wipes everything
https://mega.nz/#!asRzgCYb!f8ssb_v6zDxYJ8_u1ygzpothj1arjRmMdM_opGz8QO0
Click to expand...
Click to collapse
Link plz
waleedy said:
Link plz
Click to expand...
Click to collapse
I'm having the same problem. I'm not getting any errors, and I found and flashed the PIT file with the stock firmware. Still no boot. It just sits on the boot up screen. No recovery, no battery icon...no nothing.