Related
In pixel experience android 10 I was encrypting my phone and the screen goes black I thought it was doing its work but even after 12 hours phone didn't responded So I interrupted but now my phone just stuck on the logo. I tried to do factory data reset through recovery but it showing these errors https://drive.google.com/drive/folders/1T7kU7lyKH3Xfye7d8r_y1IKbRNj1aCJN?usp=sharing[/IMG] , (please see this drive link by copy and pasting )
I don't know what it is. Now I don't understand what to do.
I have all the drivers properly installed but even after that it is not showing the device id. I have unlocked bootloader. please help.!
d_kumar_vikas said:
In pixel experience android 10 I was encrypting my phone and the screen goes black I thought it was doing its work but even after 12 hours phone didn't responded So I interrupted but now my phone just stuck on the logo. I tried to do factory data reset through recovery but it showing these errors https://drive.google.com/drive/folders/1T7kU7lyKH3Xfye7d8r_y1IKbRNj1aCJN?usp=sharing[/IMG] , (please see this drive link by copy and pasting )
I don't know what it is. Now I don't understand what to do.
I have all the drivers properly installed but even after that it is not showing the device id. I have unlocked bootloader. please help.!
Click to expand...
Click to collapse
you were warned in telegram that not all custom rom supports encryption ...
use the backup of twrp you stored on computer before starting such a silly endeavor ...
*didn't make a backup to store on pc :silly:
anyway bro it is simple ...
•use your power and volume down button to enter fastboot mode
•connect to pc
•download and install miflash and fastboot stock rom
•install miflash and extract rom and select in miflash ...tick clean & flash all
•opem cmd window in fastboot
•run cmd :
fastboot oem edl
•when screen is black and you hear driver installing refresh in miflash
•see COM port recognized
•flash stock and start from 0
***ask in PE official channel if they support encryption ...encrypt your phone BEFORE you start using it ..so you don't lose data if it fails
:silly:why encrypt ? are you a criminal , activist,lawyer or politician ? if the answer is no just leave your phlne unencrypted ......
Sent from my wayne using XDA Labs
Hi ,
I have an ASUS ROG2 and I'm experiencing quite a problem here , I would like to know if this can still be rescue or not? or maybe I'm missing some steps here. here's what I've done so far.
Before it got to this dilemma my phone is suffering from autoshutdown so i rooted my phone using magisk and applied the thermal mode by one of the OP here. everything is working fine , the phone is not shutting down until today. it suddenly restart before me and it is stuck in ROG Logo.
what I've done.
1) i flash the stock boot img for my firmware version 2009.49 using fastboot flash boot 2009.49stock.img both slot A & B then followed by fastboot reboot so it can boot to system but it is still stock at the ROG Logo
2) i downloaded a RAW Firmware of 2009.49 , put my phone into fastboot mode. i made sure it was detected by the PC using the command fastboot devices and surely it was. i execute the flashall_AFT.cmd and waited , after it finishes my phone reboots but still stuck at the ROG Logo and here's the problem.
I reboot my phone into bootloader , scroll to Recovery after pressing Power button to select it , it boots and stuck at the ROG Logo at this point i'm confused since i need to factory reset it. so i downloaded TWRP for ROG2 Android 10 the one i usually use then i tried to boot from it using fastboot boot twrp10.img , it only boots and stuck at the ROG Logo again
3) I tried to flash a firmware using EDL mode , everything went well without any errors and there's the success message in Xiaomiflashtool , i reboot the phone to recovery and it is still stuck in ROG Logo.
any guesses? I'm kinda lost here since both RAW and EDL are not working.
KnowThyPro said:
Hi ,
I have an ASUS ROG2 and I'm experiencing quite a problem here , I would like to know if this can still be rescue or not? or maybe I'm missing some steps here. here's what I've done so far.
Before it got to this dilemma my phone is suffering from autoshutdown so i rooted my phone using magisk and applied the thermal mode by one of the OP here. everything is working fine , the phone is not shutting down until today. it suddenly restart before me and it is stuck in ROG Logo.
what I've done.
1) i flash the stock boot img for my firmware version 2009.49 using fastboot flash boot 2009.49stock.img both slot A & B then followed by fastboot reboot so it can boot to system but it is still stock at the ROG Logo
2) i downloaded a RAW Firmware of 2009.49 , put my phone into fastboot mode. i made sure it was detected by the PC using the command fastboot devices and surely it was. i execute the flashall_AFT.cmd and waited , after it finishes my phone reboots but still stuck at the ROG Logo and here's the problem.
I reboot my phone into bootloader , scroll to Recovery after pressing Power button to select it , it boots and stuck at the ROG Logo at this point i'm confused since i need to factory reset it. so i downloaded TWRP for ROG2 Android 10 the one i usually use then i tried to boot from it using fastboot boot twrp10.img , it only boots and stuck at the ROG Logo again
3) I tried to flash a firmware using EDL mode , everything went well without any errors and there's the success message in Xiaomiflashtool , i reboot the phone to recovery and it is still stuck in ROG Logo.
any guesses? I'm kinda lost here since both RAW and EDL are not working.
Click to expand...
Click to collapse
You could try booting into TWRP 3.4.0-0 Q Unofficial by mauronofrio without flashing ( fastboot boot twrp-3.4.0-0-I001D-Q-mauronofrio.img ) , then copy the zip over to root of internal storage, either 2009.49 or lastest 2012.65, from here. Be sure to check during flash which slot gets flashed first. Then repeat the process, booting twrp so that you can flash the other inactive slot. If you want to be sure you have changed slots, click on reboot in twrp and see which is active before flashing. Good luck
Hopefully flashing both slots successfully will do it. Let us know how you get on.
reg66 said:
You could try booting into TWRP 3.4.0-0 Q Unofficial by mauronofrio without flashing ( fastboot boot twrp-3.4.0-0-I001D-Q-mauronofrio.img ) , then copy the zip over to root of internal storage, either 2009.49 or lastest 2012.65, from here. Be sure to check during flash which slot gets flashed first. Then repeat the process, booting twrp so that you can flash the other inactive slot. If you want to be sure you have changed slots, click on reboot in twrp and see which is active before flashing. Good luck
Hopefully flashing both slots successfully will do it. Let us know how you get on.
Click to expand...
Click to collapse
Hi Reg !
Thanks for replying , i think I'm using the official version of TWRP so I'll give this a try , i should overcome the obstacle of booting into TWRP..
I'll let you know the outcome.
KnowThyPro said:
Hi Reg !
Thanks for replying , i think I'm using the official version of TWRP so I'll give this a try , i should overcome the obstacle of booting into TWRP..
I'll let you know the outcome.
Click to expand...
Click to collapse
Any news?
reg66 said:
Any news?
Click to expand...
Click to collapse
I used the TWRP you've linked. and i'm afraid that it is stuck on the rog logo again..
what i've done. ' fastboot boot twrpQ3400.img ' after i sent that command , the phone reboots and instead of going to twrp , it goes to rog logo and stuck there.
is there anyway i could check if there's partition? it feels like the phone has no partition that's why it is always going back to the rog logo.
KnowThyPro said:
I used the TWRP you've linked. and i'm afraid that it is stuck on the rog logo again..
what i've done. ' fastboot boot twrpQ3400.img ' after i sent that command , the phone reboots and instead of going to twrp , it goes to rog logo and stuck there.
is there anyway i could check if there's partition? it feels like the phone has no partition that's why it is always going back to the rog logo.
Click to expand...
Click to collapse
Did you change the name of the twrp file? the fastboot boot twrp-3.4.0-0-I001D-Q-mauronofrio.img cmd must have an identical name to the file, which as the original should be twrp-3.4.0-0-I001D-Q-mauronofrio.img
and just to be sure, you have the twrp img in fastboot folder, correct?
reg66 said:
Did you change the name of the twrp file? the fastboot boot twrp-3.4.0-0-I001D-Q-mauronofrio.img cmd must have an identical name to the file, which as the original should be twrp-3.4.0-0-I001D-Q-mauronofrio.img
and just to be sure, you have the twrp img in fastboot folder, correct?
Click to expand...
Click to collapse
Yes i did rename it as twrpQ3400.img and yes also , it is in the same folder as my adb & fastboot folder enviroment.
i'll try a different approach maybe using QFIL? although i don't know where to start like finding the XML / Programmer or firehose..
any ideas?
KnowThyPro said:
Yes i did rename it as twrpQ3400.img and yes also , it is in the same folder as my adb & fastboot folder enviroment.
i'll try a different approach maybe using QFIL? although i don't know where to start like finding the XML / Programmer or firehose..
any ideas?
Click to expand...
Click to collapse
Well i'm running out of ideas, never used QFIL so wouldn't know. since you cannot boot into twrp (i'm assuming you didn't relock bootloader? twrp won't work with locked bootloader), you could try this thread. be sure to use the supplied 1910.35 images as it tried and tested. read posts 1 and 2 at the very least, post 2 has useful steps
if successful, you'll then need to update 1910.64 before android 10 2004.60 to start with, then up to latest
reg66 said:
Well i'm running out of ideas, never used QFIL so wouldn't know. since you cannot boot into twrp (i'm assuming you didn't relock bootloader? twrp won't work with locked bootloader), you could try this thread. be sure to use the supplied 1910.35 images as it tried and tested. read posts 1 and 2 at the very least, post 2 has useful steps
if successful, you'll then need to update 1910.64 before android 10 2004.60 to start with, then up to latest
Click to expand...
Click to collapse
yes , i didn't lock my bootloader since i can still see the bootloader unlock message.. i'm also running low in ideas , for worst it is a bricked phone at best. i'll check the link.
thanks for helping. i'll still update this thread to maybe update u as well.
edit: i checked the link , i already did the xiaomi flash tool approach on the link.. everything was a success with no errors... maybe i shud give qpst tool a try? although i'm not familiar using it.
KnowThyPro said:
yes , i didn't lock my bootloader since i can still see the bootloader unlock message.. i'm also running low in ideas , for worst it is a bricked phone at best. i'll check the link.
thanks for helping. i'll still update this thread to maybe update u as well.
edit: i checked the link , i already did the xiaomi flash tool approach on the link.. everything was a success with no errors... maybe i shud give qpst tool a try? although i'm not familiar using it.
Click to expand...
Click to collapse
did you remember to shut the phone down after successfully flashing, boot into recovery and wipe data, then reboot? as per the instructions...?
reg66 said:
did you remember to shut the phone down after successfully flashing, boot into recovery and wipe data, then reboot? as per the instructions...?
Click to expand...
Click to collapse
yes , ofcourse since the phone is in EDL mode the only way to shut it down is by using Power + volume up + volume down like around 15 seconds then phone will shutdown since the 9008 COM in device manager will be gone this means that it's no longer in EDL mode. i wait like 1minute before i power it up to recovery by power + volume down then scroll to recovery in bootloader. then with no luck still stuck to Rog logo..
it's like the recovery partition is gone...
KnowThyPro said:
yes , ofcourse since the phone is in EDL mode the only way to shut it down is by using Power + volume up + volume down like around 15 seconds then phone will shutdown since the 9008 COM in device manager will be gone this means that it's no longer in EDL mode. i wait like 1minute before i power it up to recovery by power + volume down then scroll to recovery in bootloader. then with no luck still stuck to Rog logo..
it's like the recovery partition is gone...
Click to expand...
Click to collapse
I've been googling for you dude but no joy yet.... will have another look tomorrow
reg66 said:
I've been googling for you dude but no joy yet.... will have another look tomorrow
Click to expand...
Click to collapse
Thanks man , i'm searching for the qfil approach but i'm getting a sahara error. currently searching for fixes
edit : i manage to boot the phone using the link you've provided by using QFIL approach and not thru XiaomiFlashTool
the phone boots successfully and i can use the recovery again ! although there's a problem , it can't read my sim card and everything is like stock android without any skins or what.. i used the RAW firmware to update it but the problem with stuck logo is back :/
gonna re-flash using QFIL and i'll check some more ~ maybe use TWRP and flash the firmware there no?
edit: the one from the link is not working , stuck at rog logo.. but the one from the internet i was able to boot to system but can't detect simcard , also when plugging to PC it will go to crashdump mode.
also can't flash TWRP will result in stuck at ROG logo :/
was able to boot the phone but can't connect to wifi and is locked by google frp :/ any guides i can follow to remove that FRP without wifi connection ?
Sorry bud, really not sure what's going on with your phone or know much more. Good luck with it tho
KnowThyPro said:
was able to boot the phone but can't connect to wifi and is locked by google frp :/ any guides i can follow to remove that FRP without wifi connection ?
Click to expand...
Click to collapse
Actually, if you now have recovery, what about booting into twrp and flashing lastest 2012.65 zip from asus website, twice - both slots. see if that fixes your wifi issue
As you said using the QFIL approach worked to boot into system and recovery is back - boot to twrp from that state
KnowThyPro said:
Thanks man , i'm searching for the qfil approach but i'm getting a sahara error. currently searching for fixes
edit : i manage to boot the phone using the link you've provided by using QFIL approach and not thru XiaomiFlashTool
the phone boots successfully and i can use the recovery again ! although there's a problem , it can't read my sim card and everything is like stock android without any skins or what.. i used the RAW firmware to update it but the problem with stuck logo is back :/
gonna re-flash using QFIL and i'll check some more ~ maybe use TWRP and flash the firmware there no?
edit: the one from the link is not working , stuck at rog logo.. but the one from the internet i was able to boot to system but can't detect simcard , also when plugging to PC it will go to crashdump mode.
also can't flash TWRP will result in stuck at ROG logo :/
Click to expand...
Click to collapse
I think my i messed my phone like yours. Can you provide me step by step? I have tried those step one by one but still stuck at rog logo
Hello all,
I just got the V12.5.5.0 update on my Redmi Note 10 5G (Global).
After I rebooted the system tapping the complete notification it is stuck on the MIUI Recovery screen.
My device is not rooted. It just has received OTA updates.
I tried to reboot the system a few times, but it didn't work.
Also, I tried the safe mode, but it didn't work either.
After Reboot or safe mode, it returns to the MIUI Recovery screen.
I haven't tried the Wipe Data option because I want to back up my files first if possible.
Is there any way to back up my files or be able to fix it?
Please help.
Thanks in advance.
the only solution is enter into fastboot mode and flash stock fastboot firmware via miflash or similar tool
wetito said:
the only solution is enter into fastboot mode and flash stock fastboot firmware via miflash or similar tool
Click to expand...
Click to collapse
I tried that, but I am getting an error saying not allowed in locked state. It looks like the bootloader is locked, so I tried to use the Mi Unlock tool but I am getting error 1004. Also I tried wipe data, but it didn't work either. Right now, I don't care loss my data, I just want to have my phone back, any help is appreciated. Thanks
I have the exact same problem, after the update, lock on recovery mode, then when I tried to flash stock fastboot firmware it says that it is locked. And I also can't access Mi Unlock Tool for some reason, so if anybody has a solution to unlock bootloader I would really appreciate it.
Thanks
I got this same issue. Is there any way we can report this to mi? I don't mind if I lose my data rn, I just want this to start working normally again. someone please help if you know how to fix this
jyeros said:
Hello all,
I just got the V12.5.5.0 update on my Redmi Note 10 5G (Global).
After I rebooted the system tapping the complete notification it is stuck on the MIUI Recovery screen.
My device is not rooted. It just has received OTA updates.
I tried to reboot the system a few times, but it didn't work.
Also, I tried the safe mode, but it didn't work either.
After Reboot or safe mode, it returns to the MIUI Recovery screen.
I haven't tried the Wipe Data option because I want to back up my files first if possible.
Is there any way to back up my files or be able to fix it?
Please help.
Thanks in advance.
Click to expand...
Click to collapse
Same here, albeit I have Chinese version on Global ROM
wetito said:
the only solution is enter into fastboot mode and flash stock fastboot firmware via miflash or similar tool
Click to expand...
Click to collapse
Have you downgraded? Tried to, but accidentally locked bootloader. And it shows that version I have installed isn't compatible.
Use MTK Bypass for reparing https://megafon929.github.io/mtk
Timenator said:
Have you downgraded? Tried to, but accidentally locked bootloader. And it shows that version I have installed isn't compatible.
Click to expand...
Click to collapse
i'm an absolute beginner at this stuff, so could you tell me how to downgrade it?
i suppose try booting in safe mode dint work. the only solution is flashing full firmware, cause the ota packet is bugged.
try this tool
Home - Tool All In One
TOOL ALL IN ONE This tool support 67 different devices of some different OEMs. DOWNLOAD CHANGELOG XDA THREAD OTHERS PROJECTS
toolaio.tk
Timenator said:
Have you downgraded? Tried to, but accidentally locked bootloader. And it shows that version I have installed isn't compatible.
Click to expand...
Click to collapse
I received the device yesterday, the update notification arrived and I installed it, I didn't imagine it could be a problem, I tried to reinstall the rom but the bootloader is also blocked, I don't know what else to do, I'm desperate.
LucciM-Anon said:
i'm an absolute beginner at this stuff, so could you tell me how to downgrade it?
Click to expand...
Click to collapse
Rafaelmaga said:
I received the device yesterday, the update notification arrived and I installed it, I didn't imagine it could be a problem, I tried to reinstall the rom but the bootloader is also blocked, I don't know what else to do, I'm desperate.
Click to expand...
Click to collapse
Found a solution on web. If your phone is on Mediatek(I suppose all Note 10 5g are Mediatek? or no?) So, if it is, just look for an unlocker. You will also need MiFlash and I recommend to install Global MIUI 12.5.4. https://xiaomifirmwareupdater.com/miui/camellian/stable/V12.5.4.0.RKSMIXM/ - MIUI
Step by step guide:
How to Fix Your Hard Bricked Xiaomi Phone With Locked Bootloader
If you are familiar with custom ROM or flashing your phone, then there's a possibility that you have tried flashing your Xiaomi/Redmi/POCO Phone. Earlier
gadgetstouse.com
Timenator said:
Found a solution on web. If your phone is on Mediatek(I suppose all Note 10 5g are Mediatek? or no?) So, if it is, just look for an unlocker. You will also need MiFlash and I recommend to install Global MIUI 12.5.4. https://xiaomifirmwareupdater.com/miui/camellian/stable/V12.5.4.0.RKSMIXM/ - MIUI
Step by step guide:
How to Fix Your Hard Bricked Xiaomi Phone With Locked Bootloader
If you are familiar with custom ROM or flashing your phone, then there's a possibility that you have tried flashing your Xiaomi/Redmi/POCO Phone. Earlier
gadgetstouse.com
Click to expand...
Click to collapse
unfortunately this tutorial doesn't work here, I followed everything but it still didn't unlock the bootloader
Hi guys, I just woke up and my phone was in MIUI Recovery mode, just like yours.. Probably made the update automatically.
It seems this is a recent problem for many of us. I'm nowhere near an expect but I will continue looking for the solution (if possible, without whiping out the data or at least to be able to back-it up).
Will really appreciate if somebody posts if they find a solution.
Thanks!
The only solution is to wipe the phone. I got my lesson I will buy a samsung now
Hello all,
I got the V12.5.5.0 update to on my Redmi Note 10 5G (Global).
After I rebooted the system tapping the complete notification it is stuck on the MIUI Recovery 5.0 screen.
My device is not rooted. It just has received OTA updates.
I tried to reboot the system a few times, but it didn't work.
Also, I tried the safe mode, but it didn't work either.
After Reboot or safe mode, it returns to the MIUI Recovery screen.
I have tried the Wipe Data option and it worked and got me back to MIUI V12.5.4.0. But unfornnatly i lost all my files (about 90 Gb of data).
And this is the last i install any MIUI update until i see that a lot of user's have install it review it
My Poco M3 Pro 5G Global wasn't affected.
I manually download the OTA package and installed successfully.
This phone has a/b slot.
I'm wondering those facing this issue, have you tried switching from a to b slot or vice versa?
fastboot --set-active=a
fastboot --set-active=b
guyz92 said:
My Poco M3 Pro 5G Global wasn't affected.
I manually download the OTA package and installed successfully.
This phone has a/b slot.
I'm wondering those facing this issue, have you tried switching from a to b slot or vice versa?
fastboot --set-active=a
fastboot --set-active=b
Click to expand...
Click to collapse
i think the ota released by xiaomi is bugged. you're operation is correct, but a correct ota might do this automatically. i have noticed that many users with unlocked bootloader, after the update have phone that dont boot. i think they cant enter on fastboot mode. the only solution is flash using mediatek SP FLASH TOOL. or MI FLASH PRO. or ALL IN ONE TOOL
Was someone able to access the "Connect with MIAssistant" part using pcsuite?
I couldn't, but I think it might be because the USB cable I'm using is not the original one from Xiaomi or one compatible.
work only if you have installed also pcsuite on your device. if u have a full stock loked device only solutions are Mediatek tool or miflash pro! or all in one tool. as i said a million time already
Hello forum team,
I have a OnePlus 10 Pro with NE2213 version.
I have follow this thread successfully https://forum.xda-developers.com/t/guide-install-twrp-root-install-magisk-bypass-safetynet.4533511/
and this thread "How to Remove Orange State Warning on OnePlus Android 13" with no success
Now i'm on the Qualcomm Crashdump mode, with no access to bootloader or twrp. How to acess to flash an other rom or reset that?
Thanks you for your help
Never trust droidwin.com. In the current situation there is no way to fix this. I think RMA is the only option.
Did a quick google and it looks like you used the OP9 method on OP10... oof. The second link on google was the XDA page in the OP9 forums, and yeah that first link is super suspect since they don't even list model number. Sucks.
Most likely stuck with RMA or MSM as only options, you can attempt to boot into the other slot but I'm not sure if that file is persistent between the two.
DD228 said:
Hello forum team,
I have a OnePlus 10 Pro with NE2213 version.
I have follow this thread successfully https://forum.xda-developers.com/t/guide-install-twrp-root-install-magisk-bypass-safetynet.4533511/
and this thread "How to Remove Orange State Warning on OnePlus Android 13" with no success
Now i'm on the Qualcomm Crashdump mode, with no access to bootloader or twrp. How to acess to flash an other rom or reset that?
Thanks you for your help
Click to expand...
Click to collapse
Qualcomm Crashdump is that you are wrong slot ... You still should have fastboot. Just hold the power button and down volume it will reboot to fastboot ... then use this command " fastboot getvar current-slot " after that use this command to change slots " fastboot set_active other "
Or ... when you get back to fastboot flash twrp to both slots ... just dont panic...like some have and tried to load boot. img and bricked there phones
Stuck in bootloop after trying to flash Oxygen OS 13 coming from ColourOS 13
I have a Chinese Oneplus 10 Pro which I received with ColorOS 12.1 Android 12 NE2210_11_A_07. It then updated OTA with ColourOS 13 .x but the Google Assistant ("Hey Google!") functionality was not working. So then I tried to flash a global rom to...
forum.xda-developers.com
Thanks you for your response Canuck and link to post, i try that tomorrow in France to obtain twrp again.
When you say "just dont panic...like some have and tried to load boot. img and bricked there phones" if i have access to twrp again what do i do? usually I will load original boot image? Or or I have to check between slot?
DD228 said:
Thanks you for your response Canuck and link to post, i try that tomorrow in France to obtain twrp again.
When you say "just dont panic...like some have and tried to load boot. img and bricked there phones" if i have access to twrp again what do i do? usually I will load original boot image? Or or I have to check between slot?
Click to expand...
Click to collapse
Try to switch slots first...and reboot...I been there many times...LOL
Ok it's clear thanks
But now, i can't obtain an other thing than Qualcomm crashdump mode, when i make power button and volume bottom since phone off...
And when i keep my phone off it's reboot on the same screen
DD228 said:
Ok it's clear thanks
But now, i can't obtain an other thing than Qualcomm crashdump mode, when i make power button and volume bottom since phone off...
And when i keep my phone off it's reboot on the same screen
Click to expand...
Click to collapse
when it powers off...just hold the power button and the volume down see if it boot in to fastboot
Nothing when i make that, vibration + black screen 10 seconds and Qualcomm Crashdump Mode After
DD228 said:
Nothing when i make that, vibration + black screen 10 seconds and Qualcomm Crashdump Mode After
Click to expand...
Click to collapse
I just put my phone in Qualcomm dump mode...while you are in Qualcomm dump mode....hold the power button and volume down button...it will put you to fastboot...?
I think it go into Qualcomm dump mode because there is nothing on that slot..."not sure" but you need to get to fastboot...can't do anything without fastboot
DD228 said:
Hello forum team,
I have a OnePlus 10 Pro with NE2213 version.
I have follow this thread successfully https://forum.xda-developers.com/t/guide-install-twrp-root-install-magisk-bypass-safetynet.4533511/
and this thread "How to Remove Orange State Warning on OnePlus Android 13" with no success
Now i'm on the Qualcomm Crashdump mode, with no access to bootloader or twrp. How to acess to flash an other rom or reset that?
Thanks you for your help
Click to expand...
Click to collapse
What method did you try to use exactly to remove the orange warning?
Canuck Knarf said:
I think it go into Qualcomm dump mode because there is nothing on that slot..."not sure" but you need to get to fastboot...can't do anything without fastboot
Click to expand...
Click to collapse
Yes it's possible!
TheNewHEROBRINE said:
What method did you try to use exactly to remove the orange warning?
Click to expand...
Click to collapse
I have try this method
How to Remove Orange State Warning on OnePlus Android 13
In this guide, we will show you various methods to remove the Orange State Warning on your OnePlus device running Android 13/OxygenOS 13.
www.droidwin.com
But with extract of payload.bin of OnePlus 10 Pro NE2213, Android 13 image on slot A
DD228 said:
Yes it's possible!
I have try this method
How to Remove Orange State Warning on OnePlus Android 13
In this guide, we will show you various methods to remove the Orange State Warning on your OnePlus device running Android 13/OxygenOS 13.
www.droidwin.com
But with extract of payload.bin of OnePlus 10 Pro NE2213, Android 13 image on slot A
Click to expand...
Click to collapse
You did this cause you don't like the Orange state...!!!! Buds thats for oneplus 9 pro ...no where did I see it for 10 pro...
What method did you try...LOL . Method 1 , 2 , 3 , or 4
Look at my pic in my Avatar...says it all
Do not buy if you want to unlock bootlader...Its a no go so far . I just got mine (sorry i got bootloader unlocked)
My bad...i got bootloader unlocked
Did you flash to coloros 13 globel or o2? Can you check if it support beidou gps? I am sure o2 still no.
I just got yesterday...but there's only Colors os buds...Just released in China
Here link to buy...
Giztop - Best Price, Best Service
www.giztop.com
Here's what I did when got phone in the mail yesterday...I plugged in to charger...waited until 100 % ... went to settings...enabled developer Options. Enable OEM unlock and USB ... There was a Colos Os update so I did that . Changed everything to my area ..English and Canada...logged into internet , logged onto hey tap cloud...thought ok...lets unlock boot loader... Used ADB ..the norn things ..ABD devices...used ... "adb reboot fastboot " took me to recovery....so I used ...
" adb reboot bootloader " ..it took me to 2 Chinese and english...i hit english ...it took me to fastbootd ...Fxck just like my oppo find5 pro... No bootloader unlock... I was reading that mabey it was location ...so I tried to a factory wipe from phone. Had to sign into hey tap cloud before i could do factory wipe... anyways did wipe ...but thought i should do factory wipe from recovery...and did... set the phone up in Chinese ...didnt connect to internet ...went to developers option in chinese....enadbled OEM Unlock and USB .... Used ADB again used " adb reboot bootloader" Dam up came fastboot .
Did " fastboot flashing unlock " all is good .
Canuck Knarf said:
Here's what I did when got phone in the mail yesterday...I plugged in to charger...waited until 100 % ... went to settings...enabled developer Options. Enable OEM unlock and USB ... There was a Colos Os update so I did that . Changed everything to my area ..English and Canada...logged into internet , logged onto hey tap cloud...thought ok...lets unlock boot loader... Used ADB ..the norn things ..ABD devices...used ... "adb reboot fastboot " took me to recovery....so I used ...
" adb reboot bootloader " ..it took me to 2 Chinese and english...i hit english ...it took me to fastbootd ...Fxck just like my oppo find5 pro... No bootloader unlock... I was reading that mabey it was location ...so I tried to a factory wipe from phone. Had to sign into hey tap cloud before i could do factory wipe... anyways did wipe ...but thought i should do factory wipe from recovery...and did... set the phone up in Chinese ...didnt connect to internet ...went to developers option in chinese....enadbled OEM Unlock and USB .... Used ADB again used " adb reboot bootloader" Dam up came fastboot .
Did " fastboot flashing unlock " all is good .
Click to expand...
Click to collapse
You know you can also get to fastboot by powering off device. Then holding both vol button and power until it appears.
toolhas4degrees said:
You know you can also get to fastboot by powering off device. Then holding both vol button and power until it appears.
Click to expand...
Click to collapse
Yes I know that....I tried...only took me to recovery... it was just weird ...change everythink to my area ..and English.. using power plus power down would only take me to recovery