Database Develop

my TyTN II is not recognized by any PC

Guys,
need your help. Computers dont see my device even like usb device (i tried on several PCs). Normally windows flashes when see that usb device is connected, but in my case nothing is happenning. The same story with ActiveSync. PDA also just shows that battery is charging and doesnt show any signs that pc is connected. I've made several hard resets but it didnt help. Other functions work perfect. Please advice.

did you try a different cable? and check the usb port on your device

XtreMe_G said:
did you try a different cable? and check the usb port on your device
Click to expand...
Click to collapse
Yep, I did. I used different cables and tried on several computers. No success...

Go to start, settings, connections tab at the bottom. Click on USB to PC, uncheck advanced network funtionality. If it's uncheck try checking it. Also make sure that you have activesync version 4.5. If you are still unable to connect try disabling your windows firewall or norton, mcafee etc.

make sure Windows Mobile based device connectivity
is enabled in services.

gqstatus0685 said:
Go to start, settings, connections tab at the bottom. Click on USB to PC, uncheck advanced network funtionality. If it's uncheck try checking it. Also make sure that you have activesync version 4.5. If you are still unable to connect try disabling your windows firewall or norton, mcafee etc.
Click to expand...
Click to collapse
I followed your advice and unchecked and checked it again. It didnt help. I also checked mcaffee, it doesnt conflict with activesync and before i didnt experience any problems with mcaffee and my pda connection. So the problem is not in win.firewall (disabled) and mcaffee. I use Activesync 4.5, build 5096. I think the problem is in my PDA, cause i tried to connect it to different computers and it wasnt recognized even as usb device as normally happens when you connect any usb device to pc.

ekw said:
make sure Windows Mobile based device connectivity
is enabled in services.
Click to expand...
Click to collapse
How to check that? I didnt see such option before.

Vivendi said:
How to check that? I didnt see such option before.
Click to expand...
Click to collapse
control panel -> Administrative tools -> services ->
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
if you dont see it, you may need to reinstall windows mobile device center

Did it ever connect?
Having the windows services started will not effect the device being detected as a USB device...it should at least show up in device manager.
If you have already tried this on several computers with several cables and have also tried unchecking the advanced USB functionality as described above, then I hate to say it but either you have no idea what you are doing (unlikely...as it's pretty simple to plug in a phone) or the phone is bad.
There are quite a few things that can stop the phone from Activesyncing properly....but not much that would prevent it from coming up in device manager.
You might want to try syncing over Bluetooth if your PC has it.

ekw said:
control panel -> Administrative tools -> services ->
if you dont see it, you may need to reinstall windows mobile device center
Click to expand...
Click to collapse
I dont have such service in my service list, but it seems to me i saw it before... How to reinstall it?

bengalih said:
Did it ever connect?
Having the windows services started will not effect the device being detected as a USB device...it should at least show up in device manager.
If you have already tried this on several computers with several cables and have also tried unchecking the advanced USB functionality as described above, then I hate to say it but either you have no idea what you are doing (unlikely...as it's pretty simple to plug in a phone) or the phone is bad.
There are quite a few things that can stop the phone from Activesyncing properly....but not much that would prevent it from coming up in device manager.
You might want to try syncing over Bluetooth if your PC has it.
Click to expand...
Click to collapse
It worked perfect before, but recently ceased to communicate

You don't need that service... he is showing you a Vista machine and yours is XP.
And, as stated no running service is going to cause the device to not be seen via device manager, that is a low level hardware bus even before drivers for the device are installed (assuming the USB bus and host adapters work).
First work on getting it seen in device manager and then worry about how to get it to sync.

Check your USB port on the phone and see if the plastic core is straight across or curved down. If curved, the problem is likely the port itself.
If you have one of the HTC splitters that allows you to use headphones and charger simultaneously, try connecting via that.

i doubt its the usb port, im pretty positive its the service. My kaiser wont connect without the service under Vista. doesnt even show up as a generic device.

ekw said:
i doubt its the usb port, im pretty positive its the service. My kaiser wont connect without the service under Vista. doesnt even show up as a generic device.
Click to expand...
Click to collapse
That is a service that is new to vista. XP doesn't have that service. But you are correct, mobile devices won't connect without it running in Vista.

Vivendi said:
I also checked mcaffee, it doesnt conflict with activesync and before i didnt experience any problems with mcaffee and my pda connection. So the problem is not in win.firewall (disabled) and mcaffee.
Click to expand...
Click to collapse
Coming from a PC technician, test it with everything in McAfee disabled. Don't just assume there is no conflict because it doesn't report it. Although you said you tried it on several PC's so that would eliminate it as a suspect .
BTW, what changed when you noticed it was no longer connecting? New software, new ROM, etc... Is it still under warranty?

If there were no software changes preceding the problem, I'd go back and check the hardware possibilities. I can't think of anything that would disable the service unless you tried to run some type of system optimizer.

Hi,
This may help
> Start > Right click on My computer > Properties > Hardware (tab) > Device manager
It will open a list of devices , find USB controller ( Universal Serial Bus Controller )
Right click on it > Update ( or something like that ) . ( make sure your kaiser connected to pc through miniusb )
If it doesnt say anything about recognizing your kaiser. Try to delete (uninstall ) some ( or all ) of the items in USB controller ( above ) .
And then, update it again.
It worked for me most of the time when my pc dont recognize the device.
Goodluck

Aberz - You're a great example of how to start contributing as soon as you join the forum. Glad to see ya' here!

liquidsilver said:
Aberz - You're a great example of how to start contributing as soon as you join the forum. Glad to see ya' here!
Click to expand...
Click to collapse
thanks . It doesnt cost me nothing but save another guy something, why not lol .

Phone doesn't connect to computer via usb.

I have cyangen running but when i connect to my computer via usb it doesn't recongnize it. I installed the drivers, I tried 64bit and 32bit. I'm on window7 64bit.
I tried running adb devices and nothing shows up.
Baseband: I9000XXJVK
kernel: 2.6.35.4+ [email protected]
Build Number: GRJ22
Nightly 05062011

have you tried the i9000 drivers?

Have you tried different USB ports and do you have a different USB cable you can try?
Also, do you know how to get into Device Manager when the phone is plugged in to see if Windows even recognizes a device is plugged in? If so, check and see if anything looks wrong (like anything saying unrecognized device). Unplug the phone and see if that goes away. If it does, then that is your phone and you will manually have to install the drivers. PM me if you don't know how to do it and I'll walk you thru.
Where did you get the drivers for your phone and what phone do you have? This is the forum for the Captivate but it appears you are on Sprint which should mean you have a different phone. Regardless, the above will work for any device being plugged into a computer.

rselvaggio said:
Have you tried different USB ports and do you have a different USB cable you can try?
Click to expand...
Click to collapse
Yes and yes
rselvaggio said:
Also, do you know how to get into Device Manager when the phone is plugged in to see if Windows even recognizes a device is plugged in? If so, check and see if anything looks wrong (like anything saying unrecognized device). Unplug the phone and see if that goes away.
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
i kept getting this errror last night, i should have mentioned it, sorry.
rselvaggio said:
If it does, then that is your phone and you will manually have to install the drivers. PM me if you don't know how to do it and I'll walk you thru.
Click to expand...
Click to collapse
could you help me out with this pls
rselvaggio said:
Where did you get the drivers for your phone and what phone do you have? This is the forum for the Captivate but it appears you are on Sprint which should mean you have a different phone. Regardless, the above will work for any device being plugged into a computer.
Click to expand...
Click to collapse
I got the drivers from a link from this thread:
http://forum.xda-developers.com/showthread.php?t=731989
and i also tried the AIO capitivate toolbox and i also tried the i9000 samsung drivers but they appear to be the same from the link i provided.
I also should have mentioned this is for my girlfriends phone, I have a LG Optimus S, on sprint.
Sorry if i was kind of vague in my op post, but thanks for the help.

eltrutgnik said:
Yes and yes
i kept getting this errror last night, i should have mentioned it, sorry.
could you help me out with this pls
I got the drivers from a link from this thread:
http://forum.xda-developers.com/showthread.php?t=731989
and i also tried the AIO capitivate toolbox and i also tried the i9000 samsung drivers but they appear to be the same from the link i provided.
I also should have mentioned this is for my girlfriends phone, I have a LG Optimus S, on sprint.
Sorry if i was kind of vague in my op post, but thanks for the help.
Click to expand...
Click to collapse
Sounds like you are using Captivate drivers for an Optimus phone. Each phone will have different drivers for the computer to recognize them properly.
Here is a link to the LG site to download the drivers. Give it a try and see if this fixes your problem. If not, we will go to a next step.
http://www.lg.com/us/support/mc-support/mobile-phone-support.jsp

rselvaggio said:
Sounds like you are using Captivate drivers for an Optimus phone. Each phone will have different drivers for the computer to recognize them properly.
Here is a link to the LG site to download the drivers. Give it a try and see if this fixes your problem. If not, we will go to a next step.
http://www.lg.com/us/support/mc-support/mobile-phone-support.jsp
Click to expand...
Click to collapse
My LG phone works perfectly(well not perfectly, nothing is perfect).
I'm having trouble with the Samsung Captivate. All the problems with the usb is for the Captivate.

eltrutgnik said:
My LG phone works perfectly(well not perfectly, nothing is perfect).
I'm having trouble with the Samsung Captivate. All the problems with the usb is for the Captivate.
Click to expand...
Click to collapse
OK, I was confused when you said this was about your girlfriend's phone. No problem though.
First, remove any drivers for the phone that you have installed in Control Panel and either Add/Remove Programs or Programs and Features. Unplug the phone from the computer. Next, go to the official Samsung website http://www.samsung.com/us/support/downloads/SGH-I897ZKAATT and download the drivers, not Kies. Install the drivers first, then plug your phone back in. That should work assuming you uninstalled the drivers from DesignGears.

rselvaggio said:
OK, I was confused when you said this was about your girlfriend's phone. No problem though.
First, remove any drivers for the phone that you have installed in Control Panel and either Add/Remove Programs or Programs and Features. Unplug the phone from the computer. Next, go to the official Samsung website http://www.samsung.com/us/support/downloads/SGH-I897ZKAATT and download the drivers, not Kies. Install the drivers first, then plug your phone back in. That should work assuming you uninstalled the drivers from DesignGears.
Click to expand...
Click to collapse
Same
The reason I want the drivers is because Im getting the "phone+!+computer" but some how it still boots up normally. I tried installing a different rom but it doesnt' let me

Gonna send you a PM

Hey guys, I seem to be having the exact same problem with my Captivate. On my main desktop running Win7 32bit, it keeps saying unrecognized device, but it works on my laptop running Win7 64bit. I also used the same drivers from the thread OP posted.
Have you guys found a solution yet?

csingh said:
Hey guys, I seem to be having the exact same problem with my Captivate. On my main desktop running Win7 32bit, it keeps saying unrecognized device, but it works on my laptop running Win7 64bit. I also used the same drivers from the thread OP posted.
Have you guys found a solution yet?
Click to expand...
Click to collapse
well i just bought a new usb cable, the two cables i used before were long. The new one is short, so maybe that was it? Just try using different cables.

csingh said:
Hey guys, I seem to be having the exact same problem with my Captivate. On my main desktop running Win7 32bit, it keeps saying unrecognized device, but it works on my laptop running Win7 64bit. I also used the same drivers from the thread OP posted.
Have you guys found a solution yet?
Click to expand...
Click to collapse
Try another cable if you can. Try plugging into a different USB port. Try uninstall and reinstall the drivers. Try downloading a fresh set of drivers and reinstall. Try the official drivers at Samsung's website.
Have you tried to see if the phone is recognized in both download mode and it's regular running state? If it works in download mode, it might be a problem with the ROM that was flashed.
Good luck!!

eltrutgnik said:
well i just bought a new usb cable, the two cables i used before were long. The new one is short, so maybe that was it? Just try using different cables.
Click to expand...
Click to collapse
Hope the cable works, however the length of the cable isn't going to be a big issue. The main one I use for flashing is something like 2ft long. I had to replace a cable where the phone and the cable wouldn't "lock" together when plugged in. Had a soft brick when I tried to use it.
Anyways, I hope the cable ends up being your issue so we can call this one solved.

I am using Windows 7 Ultimate 32bit and am having trouble getting my laptop to recognize the phone through the USB cable since I've installed Win 7 SP1. After Googling, it seems others are having the same issue after SP1 install. I tried uninstalling the SP1 update but I'm still having the issue. Likewise, on m wife's Win 7 Home Premium 64bit (no SP), I can connect the phone via USB just fine and see the files/folders through Explorer.
I've tried uninstalling the drivers on my laptop and rebooting, then reinstalling the drivers and sometimes I can get the laptop to see the F:/G: drives of the phone, but they will just hang Explorer when I try to browse the files. One time Windows even tried to perform a "disk check" to repair errors when I tried to access the internal SD card (F.
I've also noticed that my Launcher Pro (paid app) won't backup my home screens and setting anymore to the sdcard. It says "An error occurred while trying to create the backup. Please make sure the SD card is available." I'm on Cognition 4.1.1 ROM and these issues only seemed to start after I installed SP1.
Anyone have any ideas?

diakonos said:
I am using Windows 7 Ultimate 32bit and am having trouble getting my laptop to recognize the phone through the USB cable since I've installed Win 7 SP1. After Googling, it seems others are having the same issue after SP1 install. I tried uninstalling the SP1 update but I'm still having the issue. Likewise, on m wife's Win 7 Home Premium 64bit (no SP), I can connect the phone via USB just fine and see the files/folders through Explorer.
I've tried uninstalling the drivers on my laptop and rebooting, then reinstalling the drivers and sometimes I can get the laptop to see the F:/G: drives of the phone, but they will just hang Explorer when I try to browse the files. One time Windows even tried to perform a "disk check" to repair errors when I tried to access the internal SD card (F.
I've also noticed that my Launcher Pro (paid app) won't backup my home screens and setting anymore to the sdcard. It says "An error occurred while trying to create the backup. Please make sure the SD card is available." I'm on Cognition 4.1.1 ROM and these issues only seemed to start after I installed SP1.
Anyone have any ideas?
Click to expand...
Click to collapse
It might just be your computer then, since it works fine on your wifes computer?
did you try using different cables?

eltrutgnik said:
It might just be your computer then, since it works fine on your wifes computer?
did you try using different cables?
Click to expand...
Click to collapse
Strangely, I was just able to get access using the same cable and laptop that wasn't working previously. I connected the cable to a different USB port and it recognized the drive (albeit very slowly), then popped up a "disk scan" notice. I unchecked the "fix/repair" boxes and allowed it to scan -- which took about 10 minutes -- then it started working (no errors reported, btw). I'm wondering if recently I disconnected the cable without turning off sharing USB-mode first and got the internal SD card a bit wonky. Seems to have cleared up now. We'll see about the next time I want to connect it, though...

diakonos said:
Strangely, I was just able to get access using the same cable and laptop that wasn't working previously. I connected the cable to a different USB port and it recognized the drive (albeit very slowly), then popped up a "disk scan" notice. I unchecked the "fix/repair" boxes and allowed it to scan -- which took about 10 minutes -- then it started working (no errors reported, btw). I'm wondering if recently I disconnected the cable without turning off sharing USB-mode first and got the internal SD card a bit wonky. Seems to have cleared up now. We'll see about the next time I want to connect it, though...
Click to expand...
Click to collapse
Ah, the joy of computers. The devices that are supposed to be the most logical and aren't. There is a good chance that the phone wasn't disconnected properly at one time. Glad you got it working.
Also, always good to plug in a USB device into a different port if it doesn't work the first time. The port you were first plugging into might not be getting the power needed to connect the phone properly.

rselvaggio said:
Ah, the joy of computers. The devices that are supposed to be the most logical and aren't. There is a good chance that the phone wasn't disconnected properly at one time. Glad you got it working.
Also, always good to plug in a USB device into a different port if it doesn't work the first time. The port you were first plugging into might not be getting the power needed to connect the phone properly.
Click to expand...
Click to collapse
I have noticed lately at times that when I plug in my USB-webcam, I get a notification that "this device will run faster when connected to a 2.0 USB port." But all my ports (according the Dell site for my laptop model) are 2.0. Considering what I paid for this laptop nearly four years ago compared to what I paid for my wife's new one at Christmas that is much more powerful, ya, computer joy. Maybe she won't notice if I switch them.

I got it working, but wow.. I don't know how this even makes sense... -_-
I have a USB extension coming from my desktop onto my desk so its easy for me to plug in stuff like USB cable of my phone and what not.. I've been using this extension for so long with my phone without problems, but turns out, when I plugged the phone USB cable straight to the desktop rather than the extension.. It works!?
I have no idea how or why.. But at least it works now :\

[FIXED]Laptop USB mouse stopped working...

Okay, so this is my problem. I tried installing LG USB drivers on Sony Vaio NS230E running Windows 7 Ultimate to update my phone (some LG java phone) this seems to have started right after the installation, my USB mouse stopped working. Touchpad still works. I tried another mouse, same thing. Another USB port, same result. Rebooted, same thing. Uninstalled the new driver, nothing. I even restored the laptop to a point in 2 days ago but still it doesn't work!
I tried a USB flash disc on the device, works. Tried my phone (Nexus S) mount and reads. I had 2 mouses that the device already knew, when I connect them, the device says nothing, but the mouse light up. I tried connecting my wireless mouse to it, but on connection, it says USB device drivers not installed. Unrecognized device.
Please help, I really don't wanna 'wipe' and 'reflash' Windows...
UPDATE: The problem is fixed. I don't know why.

Ummmmm.....I'm no help, sorry.

Try opening the Device Manager and find any USB host controllers or any USB mouses or any USB devices listed that might have to do with a mouse or pointing device. right click on it, properties, and roll-back driver. You can also try updating the drivers. If that doesnt work just download the drivers from your laptop manufacturer's Website.

m1l4droid said:
Okay, so this is my problem. I tried installing LG USB drivers on Sony Vaio NS230E running Windows 7 Ultimate to update my phone (some LG java phone) this seems to have started right after the installation, my USB mouse stopped working. Touchpad still works. I tried another mouse, same thing. Another USB port, same result. Rebooted, same thing. Uninstalled the new driver, nothing. I even restored the laptop to a point in 2 days ago but still it doesn't work!
I tried a USB flash disc on the device, works. Tried my phone (Nexus S) mount and reads. I had 2 mouses that the device already knew, when I connect them, the device says nothing, but the mouse light up. I tried connecting my wireless mouse to it, but on connection, it says USB device drivers not installed. Unrecognized device.
Please help, I really don't wanna 'wipe' and 'reflash' Windows...
Click to expand...
Click to collapse
1 mouse, 2 mice ;-)
Did you download the drivers from the laptop maker's website?

Wait. Sorry. I had a mind block and was thinking you need USB port drivers lol.
Try connecting the mouse, go to windows update, and check custom updates. Or whatever its called.

m1l4droid said:
Okay, this got really weird. I inserted a Windows 7 disc and had the computer boot from disc. And in the Windows installation wizard, the USB mouse STILL DOESN'T WORK! I'm clueless. Could this be a hardware problem?
Click to expand...
Click to collapse
Yea. Sounds like a hardware problem. Does the mouse work on another computer?

THIS
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

M_T_M said:
THIS
Click to expand...
Click to collapse
Actually that could be the problem. lol

[Q] USB not connecting via ROM, Recovery, Fastboot, Bootloader

SO basically a day ago my mac and pc both cannot recognize my Nexus 6 through USB. i tried using adb and fastboot but the phone itself is not able to make it self available to either computer. I know its on the Phone side of things b/c it does not connect on any computer. Ive used multiple usb cables and computers. As of rn i can live with it since my ROM is running fine and im not having any problems with my internal storage. But soon i wont be wont be able to live with it, it is a necessary feature for me to be able to drag and drop files from my computer to my Nexus 6. Any help would be greatly appreciated.

aaasey786 said:
SO basically a day ago my mac and pc both cannot recognize my Nexus 6 through USB. i tried using adb and fastboot but the phone itself is not able to make it self available to either computer. I know its on the Phone side of things b/c it does not connect on any computer. Ive used multiple usb cables and computers. As of rn i can live with it since my ROM is running fine and im not having any problems with my internal storage. But soon i wont be wont be able to live with it, it is a necessary feature for me to be able to drag and drop files from my computer to my Nexus 6. Any help would be greatly appreciated.
Click to expand...
Click to collapse
So boot into fastboot and connect it to your windows PC with a known working usb cable. What is the result of "fastboot devices"? Also does the device show up in device manager?

rootSU said:
So boot into fastboot and connect it to your windows PC with a known working usb cable. What is the result of "fastboot devices"? Also does the device show up in device manager?
Click to expand...
Click to collapse
in the bootloader it sais "Conect USB Data Cable"
and in CMD fastboot doesnt reply.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Also the device does not show up in device manager

I dont know if this will help but when I click USB to computer connections no new screen loads up, also I messed with the partitions a little bit a couple weeks ago but I never had a problem until now

aaasey786 said:
Also the device does not show up in device manager
Click to expand...
Click to collapse
Well if you have ruled out cables, computers and USB ports, like it sounds that you have - it is most likely a USB port issue on your device (or something motherboard related.)

rootSU said:
Well if you have ruled out cables, computers and USB ports, like it sounds that you have - it is most likely a USB port issue on your device (or something motherboard related.)
Click to expand...
Click to collapse
Are ther any steps i can take to be 100% sure i cant fix this on my end

aaasey786 said:
Are ther any steps i can take to be 100% sure i cant fix this on my end
Click to expand...
Click to collapse
Check there is no obstruction on the port. Loose pins etc. But I would send it for repair to be honest.

rootSU said:
Check there is no obstruction on the port. Loose pins etc. But I would send it for repair to be honest.
Click to expand...
Click to collapse
Damn its such a hassle my screen cracked on my first nexus 6 s i just got this one 5 days ago

aaasey786 said:
Damn its such a hassle my screen cracked on my first nexus 6 s i just got this one 5 days ago
Click to expand...
Click to collapse
Well I got a new nexus and T-Mobile worked a good deal out,I just had to pay for shipping

Dropped phone - trying to recover the data

Hi all,
Dropped my phone and the phone stopped responding. I tried replacing the screen but this made no difference.
Since the phone was just not turning on at all (no sort of response), I tried to replace the charging port after (after the drop, the sim card tray was damaged so thought the issue might be around here).
After I replaced the charging port, I managed to get the notfication light flashing (with a power source) and now it is solid.
When I connect it to my PC, I hear the notification sound when a device has been connected but unable to view any files or see it show in my PC.
I feel like I'm close to getting the phone working but not quite there yet. I am mainly interested in just recovering the data.
Any help would be much appreciated.

In this case, you need a screen, either on the phone itself, or an external one, and a mouse to navigate the options, if you manage to get the screen to work, enable USB debugging, run adb devices, if your phone shows up as a device (reference screenshot:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
), you can run adb pull /sdcard/ to copy all the files from it to your PC, but if it shows up as unauthorized (reference screenshot:
), you need to allow usb debugging on the phone, then run adb pull /sdcard/ to copy the data.
And remember for the sake of god NEVER use MTP if you're copying more than one small file at a time, as it is known to corrupt large files, or large quantities of files, if you do not want corruption use adb pull

Miki200_ said:
In this case, you need a screen, either on the phone itself, or an external one, and a mouse to navigate the options
Click to expand...
Click to collapse
Thank you for your reply - do you have any recommendations here? Specifically for xiaomi 9t pro? I read somewhere an MHL cable would not work

Dropped my phone and it stopped working. Replaced screen, still doesn't work. Replace charging port and notification light started blinking and turned solid though I don't see it anymore.
But the phone connects to the PC - I just can't access the phone. Using ADB I get a serial number followed by unrecgonised.
What can I use for this phone to get some sort of display, and something to control? Based in UK so any UK links would be appreciated.

plshelpmepls said:
Thank you for your reply - do you have any recommendations here? Specifically for xiaomi 9t pro? I read somewhere an MHL cable would not work
Click to expand...
Click to collapse
The cable you got with the phone should work for this.

plshelpmepls said:
Dropped my phone and it stopped working. Replaced screen, still doesn't work. Replace charging port and notification light started blinking and turned solid though I don't see it anymore.
But the phone connects to the PC - I just can't access the phone. Using ADB I get a serial number followed by unrecgonised.
What can I use for this phone to get some sort of display, and something to control? Based in UK so any UK links would be appreciated.
Click to expand...
Click to collapse
Well, unrecognized means ADB does not even know what type of device is that, that's not good.
Any dock for a macbook using USB-C should work, as for proper stuff:
https://www.amazon.co.uk/UGREEN-Multiport-Adapter-Ethernet-Compatible-Grey
https://www.amazon.co.uk/UGREEN-Aluminium-Delivery-Charging-Compatible-Space-Grey
These two should also work with it.

Miki200_ said:
Well, unrecognized means ADB does not even know what type of device is that, that's not good.
Any dock for a macbook using USB-C should work, as for proper stuff:
https://www.amazon.co.uk/UGREEN-Multiport-Adapter-Ethernet-Compatible-Grey
https://www.amazon.co.uk/UGREEN-Aluminium-Delivery-Charging-Compatible-Space-Grey
These two should also work with it.
Click to expand...
Click to collapse
Sorry, not sure why I said unrecognised - I get unauthorised like you mentioned before. Will try these options, thank you.

Miki200_ said:
Well, unrecognized means ADB does not even know what type of device is that, that's not good.
Any dock for a macbook using USB-C should work, as for proper stuff:
https://www.amazon.co.uk/UGREEN-Multiport-Adapter-Ethernet-Compatible-Grey
https://www.amazon.co.uk/UGREEN-Aluminium-Delivery-Charging-Compatible-Space-Grey
These two should also work with it.
Click to expand...
Click to collapse
Are you sure these work? I have another working 9T pro and cannot get any display. I'm using https://www.amazon.co.uk/gp/product/B07PPGWQ15/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

plshelpmepls said:
Are you sure these work? I have another working 9T pro and cannot get any display. I'm using https://www.amazon.co.uk/gp/product/B07PPGWQ15/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
Click to expand...
Click to collapse
Well, there is no way to be sure if these will work, it's just a guess based on what standards the phone supports

plshelpmepls said:
Sorry, not sure why I said unrecognised - I get unauthorised like you mentioned before. Will try these options, thank you.
Click to expand...
Click to collapse
Ok, so, you somehow need to authorize the PC for USB Debugging