i have ne2210 oneplus 10 pro and i flash it with Msm tool,after this fingure print just vibrate and not worked,,,,,try to flash presist and it flash sucessfully but still fingurprint not work,,,,,,then convert it to eu by flashing playload.bin with fastboot enhance still same isssue,,,try everything but not got fingureprint back,,,someone exert here then please help me.,,my telegram is @Raheelrajpoot .....if any expert here then contact me
Related
Hi,
I want to make a flash using this rom ENG FACTORY FIRMWARE XIAOMI DIPPER by mi flash doesn't have to be in edl mode, but I don't have an auth account, does anyone know how I can do it? I was thinking that chimera tools can work, what do you think?
Is Redmi Note 9 (Merlin) / Redmi 10x 4G anti-rollback enabled?[attachimg]6427726[/attachimg]
When I check the anti-rollback index in mine, the result of this error is:getvar: anti failed (remote: getvar variable not found)What does this mean?I am currently in Chinese ROM miui 12.0.4 stable (qjocnxm) now If I flash Global rom V11.0.5.0.QJOMIXM, and if my mobile has anti-rollback enabled, will the mobile be bricked?plz let me know plzfeeling_so_confused _ & _ helpless
Yes
Don't even try to flash old version of miui in fastboot mode
There is a way to break this system by flashing in twrp, but it's not guaranteed
For safety, don't install old miui if you love your device
unlock your bootloader and with twrp you can roll it back but before you need to wipe all the data from custom recovery
Yes.
But, actually all firmwares keep in same rollback version.
So you can have V12.0.6.0 installed and then flash older version, as V11.0.2.0. Or opposed.
If you are using V12.0.4.0 or lower, you can flash without EDL and authentication.
If you are using V12.0.5.0 or higher, you need EDL and authentication for flashing.
If you want to use sp flash tool, you need to flash the stock rom preloader using V12.0.4.0 (or lower). (It will works perfectly with lower preloader binary version).
With an older preloader version, your phone will can receive DA files and accept flashing with NO auth.
Everything you need to do is plug your phone in usb (without press any key, if you press any key it will enter in EDL mode and requests authenticaion).
Here, are PRELOADER binaries for flashing: https://forum.xda-developers.com/t/...omi-redmi-10x-4g-xiaomi-redmi-note-9.4221081/
Here, are DA files for flashing using flash tool: https://forum.xda-developers.com/t/...omi-redmi-10x-4g-xiaomi-redmi-note-9.4209767/
Only after it, you can use sp flash tool again.
Do you need help with your MERLIN device ?
Read this FAQ: https://forum.xda-developers.com/t/...for-merlin-redmi-10x-4g-redmi-note-9.4225177/
I mean, I was able to downgrade from MIUI 12.5.4 (Android 11) back to 12.0.1 (Android 10) with no verification or anything like that. I didn't get any errors or render my device useless. Maybe, I was just lucky?
rahuldhrubork said:
Is Redmi Note 9 (Merlin) / Redmi 10x 4G anti-rollback enabled?[attachimg]6427726[/attachimg]
When I check the anti-rollback index in mine, the result of this error is:getvar: anti failed (remote: getvar variable not found)What does this mean?I am currently in Chinese ROM miui 12.0.4 stable (qjocnxm) now If I flash Global rom V11.0.5.0.QJOMIXM, and if my mobile has anti-rollback enabled, will the mobile be bricked?plz let me know plzfeeling_so_confused _ & _ helpless
Click to expand...
Click to collapse
It's not a variable "anti." It's called "rollback_ver" or "rollback" on MediaTek devices. I was also confused about this.
I tried to root my phone. Now the fingerprint and compass sensor not working.
I think I messed up with persist.img
I tried flashing stock rom through MSMtool, flashing persist through fastboot, nothing works.
Sensors not working woith AOSP rom too.
Can you share your persist.img?
Can someone tell me how should I proceed?
Device info, PCB ?
How did u do it ?
Product ID 20711
Unlocked bootloader with in-depth testing tool.
Then patched boot.img with magisk and flashed through fastboot.
Fingerprint and compass gone.
Then flashed entire rom with fastboot. Some partitions succeded, some partitions failed (Error: critical partition cannot be flashed)
Then tried MSMtool, and flashed edl rom.
Tried flashing AOSP GSI rom.
All in vain. Fingerprint and compass not working.
Could you share your persist.img? I'll try flashing it.
Any other advice?
Phone RMX3081, GDPR of EXPORT (Guess Export) NV ?
Code:
You are not the last one. In new version of the script for the persist image won't be replaced !
Update backlist to preserve persist.img by rapperskull · Pull Request #14 · italorecife/OppoRealme-OFP-Flash
Update backlist to preserve persist.img Enforce blacklist for both partitions on A/B devices
github.com
I have locked bootloader and GDPR, the original from ofp is not good
Do you have latest .C20 or .C21 ?
Check https://realmefirmware.com/realme-firmware-update/
I installed C21
On investigating the Xiaomi MI Flash tool there are 2 conflicting statements:
1/ Xiaomi MiFlash Tool is a flashing tool developed by Xiaomi Inc. This Xiaomi tool allows the users to flash the Stock MIUI 8, MIUI 9, MIUI 10 etc. all the older and latest versions of MIUI ROM on any Mi or Redmi Phone.
then
2/ The MiFlash Pro tool only supports devices powered Qualcomm Chipset.
As my phone has a MediaTek chipset I assume the Xiaomi tool will not work. In that case how does that affect the other tools like Magisk, do they support MediaTek chipsets?
I have unlocked the bootloader but I am now unsure how to proceed? Any help appreciated, I wish to install the stock global ROM over the Chinese ROM.
The official Miflash tool supports all Xiaomi, Qualcomm and MediaTeck devices.
You can also flash a Fastboot rom without using Miflash, use the .bat scripts included in the extracted folder of the TGZ file in Fastboot mode.
MIFLASH[GUIDE]⚙ USE XIAOMI FLASH TOOL
FOR ALL XIAOMI BOOTLOADER MUST BE UNLOCKED https://new.c.mi.com/global/post/101245 https://en.miui.com/unlock/index.html ----------------------------------------------------------------------------------------------------------- All your data...
forum.xda-developers.com
(IMHO) MiFlash Pro is no official tool, you don't care about chipset on official Xiaomi MiFlash.
So I flashed the pixelexperienceplus rom on my Redmi note 9 (Merlin) a few days ago.
Everything was working fine except the Volte on my networks were not working so I decided to roll back to the original rom (MIUI 13 stock) and flashed the fastboot Rom of it. It then showed sucess on the MI FLASH TOOL and device booted and stuck on the redmi logo and not going anywhere. (I have all the adb drivers and all installed on my pc as well as on the phone)
Did I do something wrong in my flashing process. How do I fix it? I'd really appreciate if you all can help me with that
Could you post the Miflash log?
NOSS8 said:
Could you post the Miflash log?
Click to expand...
Click to collapse
Inside the logs folder i have all this
image path:
C:\Users\asus\Desktop\merlin_in_global_images_V12.5.6.0.RJOINXM_20220629.0000.00_11.0_in
Correct the path
C:\miflash\rom folder
MIFLASH[GUIDE]⚙ USE XIAOMI FLASH TOOL
FOR ALL XIAOMI BOOTLOADER MUST BE UNLOCKED https://new.c.mi.com/global/post/101245 https://en.miui.com/unlock/index.html ----------------------------------------------------------------------------------------------------------- All your data...
forum.xda-developers.com
NOSS8 said:
image path:
C:\Users\asus\Desktop\merlin_in_global_images_V12.5.6.0.RJOINXM_20220629.0000.00_11.0_in
Correct the path
C:\miflash\rom folder
MIFLASH[GUIDE]⚙ USE XIAOMI FLASH TOOL
FOR ALL XIAOMI BOOTLOADER MUST BE UNLOCKED https://new.c.mi.com/global/post/101245 https://en.miui.com/unlock/index.html ----------------------------------------------------------------------------------------------------------- All your data...
forum.xda-developers.com
Click to expand...
Click to collapse
Tried the above and again greeted with the sucess result but the phone is still stuck on Redmi Logo and not booting
Also before it was showing sucess even with long names and outside the miflash folder. But the phone was not booting
with the above method with shorter names and inside folder it is no difference for me.....
Some issues with Miflash with Mediatek SOCS.
Try to flash a TWRP(according your system) and flash a recovery rom
Recovery for Xiaomi devices - Browse /merlin at SourceForge.net
List of relevant recovery in one place
sourceforge.net
or try this tool
(Tool) ROM2box All in one FRP, Flashing & unlocking tool
ROM2box is a Powerful tool and GUI bring all the tools on a single app. it support qcom mediatek and spreadtum phones. Supported Functions- Function Name Status bypass Auth Yes bypass FRP MTK yes bypass FRP qcom yes bypass FRP samsung...
forum.xda-developers.com
Other tools
SP Flash Tool v5.1924 - Download SmartPhone Flash Tool
SP flash tool download - SP Flash Tool v5.1924 is the latest version that can flash Stock ROM, Custom recovery for your MTK based android phone. SPFLASH tool comes as free-ware.
spflashtool.com
Download MTK Flash Tool (all versions) - Mediatek Flash Tool
Download the latest version of MTK Flash Tool, which helps you to Flash or install Stock Firmware on Mediatek Feature Phone.
androidmtk.com
NOSS8 said:
Some issues with Miflash with Mediatek SOCS.
Try to flash a TWRP(according your system) and flash a recovery rom
Recovery for Xiaomi devices - Browse /merlin at SourceForge.net
List of relevant recovery in one place
sourceforge.net
or try this tool
(Tool) ROM2box All in one FRP, Flashing & unlocking tool
ROM2box is a Powerful tool and GUI bring all the tools on a single app. it support qcom mediatek and spreadtum phones. Supported Functions- Function Name Status bypass Auth Yes bypass FRP MTK yes bypass FRP qcom yes bypass FRP samsung...
forum.xda-developers.com
Other tools
SP Flash Tool v5.1924 - Download SmartPhone Flash Tool
SP flash tool download - SP Flash Tool v5.1924 is the latest version that can flash Stock ROM, Custom recovery for your MTK based android phone. SPFLASH tool comes as free-ware.
spflashtool.com
Download MTK Flash Tool (all versions) - Mediatek Flash Tool
Download the latest version of MTK Flash Tool, which helps you to Flash or install Stock Firmware on Mediatek Feature Phone.
androidmtk.com
Click to expand...
Click to collapse
Tried the SP flash tool and the MTK auth Bypass at first it was not working because of MTK driver issues but later I installed the drivers and flashed
The phone is working now
Thanks for your Help and Time