Galaxy Buds 2 1st week usage report - Off-topic

My carrier had a deal for 50% off some galaxy buds 2 because reasons. It worked well for the learning curve with touch controls and whatever. Today I noticed the bottom of the clamshell case kind of swelled up, battery is suspect. To make things even more concerning. When I have the left earbud in my ear (regardless of the right earbud) Ithe left side of my head feels sore and it feels like I got punched in the eye. The complete opposite of what I asked for. I pull the left earbud out and 15 minutes later the pain goes away. There is no issue in the right ear what so ever. This is the first time I've used and owned wireless earbuds. Never had this experience with any other bluetooth, wired, wireless USB, audio thing ever. Earbuds, cans, whatever...never mattered.
Nothing on any search engine says anything about this sort of thing. I don't keep them in my ears for more than 2 hours at a time and practice proper hygiene. A swollen battery a week after pulling out them of the box is what it is and needs to be addressed alone. The pain aspect on the left side leaves me to wonder if that is the result of a defect on that specific earbud since the right side is OK. The Samsmug galaxy buds 2 is the only wireless earbuds I've ever used before so it's kind of a tough call on what the problem actually is.
Just wanted to share an odd experience and welcome any admonishment or advice anyone cares to share.

Related

[Q]Repair Headphone Jack

Huhu,
some weeks ago it start that i had problems with my headphone jack. sometimes it stops playing music when it get touched while i put it in the pants. and now i can be happy if the smartphone register 1 of 100 times i connect my headphones.
someone of u ever had the same problem and repair it himself?
pls let me know because that s*ck ;] and sry my bad english
I think the best and easiest thing to do to fix this is take it in and have them replace it.
Get the pocket lint out. Seriously, lol. Mine was doing the same thing, so I looked in it with a really bright flashlight and saw pocket lint pressed against the bottom
Sent from my XT862 using XDA App
i also had one in but putting him out not help ;()
Repair Headphone Jack
Had problems with D1 phone jack, and D3 also. To me it is a matter of thickness of the male jack. I have real nice Sony ear buds but the jack cuts out, move it and is good for short while. I pinched the jack to make it oblong, very desperate move. Cuts out much less, but still kinda crapy. I have an older Sony ear buds and the jack is thicker and have no problems. Even at the gym.
Bottom line is cheesy, cheap parts there on that Motorola.
Cameron6472 said:
Get the pocket lint out. Seriously, lol. Mine was doing the same thing, so I looked in it with a really bright flashlight and saw pocket lint pressed against the bottom
Sent from my XT862 using XDA App
Click to expand...
Click to collapse
+1
This happened to me twice. So, I guess that should be +2!
The plug would stop snapping in. I thought for sure I had broken the jack. But after a little close inspection, a flashlight, toothpick and can of duster I was able to get it working good as new again.
some days ago i was looking around the internet and find these
http://www.ifixit.com/Teardown/Motorola-Droid-3-Teardown/6108/1
so some days later i was funny enough to open my Droid3, too.
and then i was able to get some more pocket lins out of the headphonejack.
i was thinking its already clean but these wasnt visible from the top.
and now all is woorking fine

Creaky Nexus 7 3G - FIX

To all people who have this problem! I recently got the Nexus 7 3G and the back was creaking so badly you could easily hear it across a large room. The noise seemed to come from the "nexus" logo near the top of the device.
I found the culprit an double checked with an older 16GB model. They changed the design of golden contact springs for the wireless radios from a simple C shape design to some complicated folding Z shaped spring design. It is those springs that upon being depressed rub metal on metal and make this horrible creaking noise. I don't know how many 3G's are affected but mine definitely was.
My solution was to open it up, which is easy enough to do with a guitar pick or something similar, just check YouTube, and to bend the springs until they stopped making noises under load.
While I was in there I also added double sided tape wherever necessary to stop the plastic from creaking (because they left out a lot of the foam they put in the older models, maybe to fix the screen lift issue??) and I re-wrapped the battery protection circuit because the circuit board was rubbing on the battery and making noises as well. (also, my battery was strangely wedged sideways in it's compartment)
All in all it's rock solid now, no creaks, nothing. And it feels like a really quality device now. Suffice to say that I should never have had to do this in the first place in order to own a device that is in satisfactory condition and one is not embarrassed to pass along in a group of friends because of the noises it makes
fabian.ecker said:
To all people who have this problem! I recently got the Nexus 7 3G and the back was creaking so badly you could easily hear it across a large room. The noise seemed to come from the "nexus" logo near the top of the device.
I found the culprit an double checked with an older 16GB model. They changed the design of golden contact springs for the wireless radios from a simple C shape design to some complicated folding Z shaped spring design. It is those springs that upon being depressed rub metal on metal and make this horrible creaking noise. I don't know how many 3G's are affected but mine definitely was.
My solution was to open it up, which is easy enough to do with a guitar pick or something similar, just check YouTube, and to bend the springs until they stopped making noises under load.
While I was in there I also added double sided tape wherever necessary to stop the plastic from creaking (because they left out a lot of the foam they put in the older models, maybe to fix the screen lift issue??) and I re-wrapped the battery protection circuit because the circuit board was rubbing on the battery and making noises as well. (also, my battery was strangely wedged sideways in it's compartment)
All in all it's rock solid now, no creaks, nothing. And it feels like a really quality device now. Suffice to say that I should never have had to do this in the first place in order to own a device that is in satisfactory condition and one is not embarrassed to pass along in a group of friends because of the noises it makes
Click to expand...
Click to collapse
Would u mind taking a picture of the inside where u added tape to stop the backplate from creaking and upload it. I've tried many things to fix it to no avail.
Sent from my Nexus 7 using Tapatalk 2
i will as soon as i find some time. there is another thread here on xda. it's for the wifi model but i adapted the suggestions for my nexus 7. also, what i did for mine might not work for yours. my suggestion is, figure out where the noise is coming from, add some double sided tape or foam close it partially and try it. took me about 2 days of trial and error to achieve an acceptable state
http://forum.xda-developers.com/showthread.php?t=1848013
here is the link
fabian.ecker said:
i will as soon as i find some time. there is another thread here on xda. it's for the wifi model but i adapted the suggestions for my nexus 7. also, what i did for mine might not work for yours. my suggestion is, figure out where the noise is coming from, add some double sided tape or foam close it partially and try it. took me about 2 days of trial and error to achieve an acceptable state
Click to expand...
Click to collapse
Thanks very much. My only creak is on the right side where the battery is and close to the bezel. Did u happen to have one there as well? Wish me luck lol off to void my warranty
Sent from my [insert phone model here]
fabian.ecker said:
To all people who have this problem! I recently got the Nexus 7 3G and the back was creaking so badly you could easily hear it across a large room. The noise seemed to come from the "nexus" logo near the top of the device.
I found the culprit an double checked with an older 16GB model. They changed the design of golden contact springs for the wireless radios from a simple C shape design to some complicated folding Z shaped spring design. It is those springs that upon being depressed rub metal on metal and make this horrible creaking noise. I don't know how many 3G's are affected but mine definitely was.
My solution was to open it up, which is easy enough to do with a guitar pick or something similar, just check YouTube, and to bend the springs until they stopped making noises under load.
While I was in there I also added double sided tape wherever necessary to stop the plastic from creaking (because they left out a lot of the foam they put in the older models, maybe to fix the screen lift issue??) and I re-wrapped the battery protection circuit because the circuit board was rubbing on the battery and making noises as well. (also, my battery was strangely wedged sideways in it's compartment)
All in all it's rock solid now, no creaks, nothing. And it feels like a really quality device now. Suffice to say that I should never have had to do this in the first place in order to own a device that is in satisfactory condition and one is not embarrassed to pass along in a group of friends because of the noises it makes
Click to expand...
Click to collapse
Bookmarking so I recognize your nick on an upcoming "My wifi doesn't work!" thread.
Don't worry about your warranty! there is a "seal" sticker INSIDE the case but popping the back off will most certainly not void your warranty. it's more like the battery cover on a galaxy s3 or a nexus s than anything else!
fyi i had it on the right, left, and top of the device

[Q] S4A USB Flap/Seal

Hey all,
i have an issue with my usb flap. I can close it, and the phone allready survived some water. But as a mechanical engineer i am not happy with the seal for the usb port.
I try to explain it: when i close the seal it keeps popping out a little bit. Depending on which side i press in first (Top or bottom) the other one pops out about 0.5 to 1mm. In the end the flap seems to feel more comfortable in the position where the top side stays out. Some employee told me that is normal, i had nothing to compare so i have to believe him for the moment. Thats why i ask you guys if your device has the same or not.
Thanks for your help. Sorry for my english.
Greatz
I have the same problem currently. This is my second Active. The first didn't do this. I'm considering a warranty replacement, but I don't want to spend the time setting everything up again.
Sent from my SAMSUNG-SGH-I537 using Tapatalk 4
Open the flap, then pull it just a tiny bit so the side section is exposed (you pull in the direction of the power button side of the phone, so to the right just a bit). When you insert it, you need to slide that section back into the area it's designed for, pressing down on the left side somewhat firmly (left in terms of you staring at the screen). When that's done, press down on the right side so it's flush - so the whole cover is flush with the bottom of the phone.
There's actually two "levels" of it being closed: the first is close to being flush but not completely; this level kills the water-resistant feature and your phone too if you don't seal it properly and dunk it.
The second level is when it's truly in place, and you can actually feel it when it "snaps" into that position - when it's truly in place the cover is totally flush with the bottom surface of the phone.
Just something I had to come to understand myself in my short period of time owning the GS4A.
Might be helpful info, might not, but that's how I've come to understand it and seal that USB port cover personally without issues.
My cover has been getting worse. I can still get it to snap into place, but I have to get it positioned just right or it does not seal completely. I think that it will probably break off soon and become lost. Does anyone know if the seal is easily replaceable? I haven't seen the part listed on the parts thread. It is frustrating to think that the only option may be to send it back to replace a 10c part. Considering the design intent of this phone, I certainly thought that Samsung would have developed an inductive charging back long before the USB seals would start wearing out.
Sent from my SAMSUNG-SGH-I537 using Tapatalk 4
Hear's another thing (pun intended) about that microUSB port cover: it works in conjunction with the speaker as well meaning that whole bottom section is a "woofer" port enclosure, basically, taking the term from speaker enclosure technology.
When the cover is in place and sealed properly, you get "more bass" (ok it ain't much but it's very noticeable to me) when audio is coming from the speaker. If you remove the cover while audio is playing, voila, it turns all tinny and full of nothing but very high end frequencies. And when the cover is in that first level of being attached, you still will hear mostly high end frequencies - only when it's properly in place and the seal is in effect does the audio tone change, at least in my situation.
Just something I noticed, thought it was somewhat cool the first time it happened, I thought I had broken something when the audio took on that high tinny and harsh quality.
Mine broke last night and called samsung the tech guy telling me thats the fist time that the seal port cover broke.and I have to wait 2weeks to get it done.should I go att instead but not sure they will replace this thing...
pink_lady03 said:
Mine broke last night and called samsung the tech guy telling me thats the fist time that the seal port cover broke.and I have to wait 2weeks to get it done.should I go att instead but not sure they will replace this thing...
Click to expand...
Click to collapse
I'd call AT&T's warranty line.
Sent from my SAMSUNG-SGH-I537 using Tapatalk 4
br0adband said:
Open the flap, then pull it just a tiny bit so the side section is exposed (you pull in the direction of the power button side of the phone, so to the right just a bit). When you insert it, you need to slide that section back into the area it's designed for, pressing down on the left side somewhat firmly (left in terms of you staring at the screen). When that's done, press down on the right side so it's flush - so the whole cover is flush with the bottom of the phone.
There's actually two "levels" of it being closed: the first is close to being flush but not completely; this level kills the water-resistant feature and your phone too if you don't seal it properly and dunk it.
The second level is when it's truly in place, and you can actually feel it when it "snaps" into that position - when it's truly in place the cover is totally flush with the bottom surface of the phone.
Just something I had to come to understand myself in my short period of time owning the GS4A.
Might be helpful info, might not, but that's how I've come to understand it and seal that USB port cover personally without issues.
Click to expand...
Click to collapse
Both of the ones I have are the same as this. I've had to really explain to the missus that she can't just 'sorta' close it otherwise it's not waterproof any more. I haven't had any issues yet but as soon as that wireless WiQiQi proves itself battle worthy (or at least doesn't mess up the seal on the back) I'm putting in for 2 of them ASAP. I haven't used any sort of wireless charging yet but I'm pretty confident that I won't ever buy a phone that doesn't have it ever again, same as I won't ever buy a non-waterproof phone after the Rugby Smart and the S4A have proved themselves worthy.
br0adband said:
Open the flap, then pull it just a tiny bit so the side section is exposed (you pull in the direction of the power button side of the phone, so to the right just a bit). When you insert it, you need to slide that section back into the area it's designed for, pressing down on the left side somewhat firmly (left in terms of you staring at the screen). When that's done, press down on the right side so it's flush - so the whole cover is flush with the bottom of the phone.
There's actually two "levels" of it being closed: the first is close to being flush but not completely; this level kills the water-resistant feature and your phone too if you don't seal it properly and dunk it.
The second level is when it's truly in place, and you can actually feel it when it "snaps" into that position - when it's truly in place the cover is totally flush with the bottom surface of the phone.
Just something I had to come to understand myself in my short period of time owning the GS4A.
Might be helpful info, might not, but that's how I've come to understand it and seal that USB port cover personally without issues.
Click to expand...
Click to collapse
Mine unfortunately never snaps. I can push it to the desired position, but it never stays there.
So I have to replace it.
Hate this just because of one little part...
From mechanical view this problem seems logic. The seal fits into the housing and the USB port. The housing is connected to a print board and the USB port is on the print. The seal must fit very exactly and over this array of possible small failures a exact position is hard to get...
Greatz and thanks
Sent from my GT-I9295 using xda app-developers app
If I can make a suggestion, take it as such for those (of us) that have the GS4A and may or may not be having issues with the microUSB cover/flap/etc:
Personally I can't wait to get my GS4A set up and working with a wireless charger. I'm still on the fence at the moment over which one to get/use but I'll figure it out. But because of the fact that I hate plugging and unplugging the GS4A (or any smartphone) and knowing that each time I do it I'm just creating that much wear and tear on the microUSB port, I purchased the app called Wifi File Transfer Pro a very long time ago and I have never had one single moment to regret the purchase (that means I LOVE IT).
I'm not a shill for it, but honestly, for a buck and change there's no better such app on the Play marketplace that I've been able to track down and I've tried about 30 of them meaning apps that allow you to connect to your device over your Wi-Fi network for file transfers to and from the device, etc.
The only reason I plug my GS4A in is to charge it these days and I'm just getting tired of doing it as frequently as I do because... I currently have a cheap Samsung counterfeit battery - learned the hard way with that one - but I have a real Samsung battery on order, should be here by Friday, purchased with that 50% off code they gave me for registering the GS4A with Samsung a few weeks back.
So in a few days I'll have a wireless charger, a real legit Samsung battery (brand new, even), and I'll use the microUSB port one last time, hopefully to do a proper full charge on that battery (with a 2A charger, even) and then once that's done I'll close that flap with the intention of never opening it again.
But seriously, if you're doing a lot of transfers to and from the phone for whatever reason, look into that app - Wifi File Transfer Pro from smarterDroid - or some other such wireless transfer app depending on your needs and wants (because there are several dozen of them on the Play marketplace and take the wireless route. Yes, using the microUSB is faster overall because it's a hardwired connection but I typically get 6-10MB/s using this app and my 11n network.
Go truly wireless or go home and save that microUSB port just for emergencies...
pink_lady03 said:
Mine broke last night and called samsung the tech guy telling me thats the fist time that the seal port cover broke.and I have to wait 2weeks to get it done.should I go att instead but not sure they will replace this thing...
Click to expand...
Click to collapse
Mine broke off the first week I had it. Horrible design. Terrible application. I kept the plug but since I am constantly plugging in to power up it is more of a hindrance than a feature. Wireless will be an issue unless they will fit inside a protective case. The Active is already too thick to fit in most cases made for the regular S4.
It's the same thickness as the GS4 for the most part, barely a millimeter difference, but the GS4A is a bit longer top to bottom. There are a lot of cases available now for it that accommodate the differences (longer body length, slight expansion at the end rubber caps top and bottom back, etc). Those Diztronic ones are some of the thinnest full body cases I've seen so far but I went the Unicorn Beetle route and have been nothing but happy since I first put it on.
Yes the flap could have been done better I suppose, but I've got a cheap LG prepaid using a similar mechanism with the microUSB port cover and I've plugged unplugged that phone a thousand times over the years, still works fine.
Sometimes I think people should just take better care of their hardware...
A soft case without an opening for the flap would be nice Than it looks better and we can not destruct the flap

Headphone jack - is this how its supposed to be?

This is a pretty asinine problem but I just had a query regarding my Nokia 8.
I've iPhones over the past 5-6 years. The headphone jack on my Nokia 8 seems to be 'mushy'. Now don't get me wrong. The headphone jack fits fairly snugly and is no way loose. There is satisfying click that you generally expect from a headphone jack. I mean the last mm requires a push but it doesn't click into place.
Is this because of the waterproofing and possible water gaskets inside the jack?
The last 5% takes. bit of force to go in but there isn't a metal audible click that I used to hear from other phones/laptops.
It might be a faulty jack cause i don't have that problem.
Sent from my TA-1012 using XDA Labs
Mine is the same, I think.
I've noticed that while the last mm or so of insertion has friction, the 'click' happens early. This means the jack can be pulled out about a mm or so (causing music to pause) without the jack 'letting go'.
By comparison, my S5 headphone jack takes about the same amount of force to release, but it's more 'all or nothing'. It is either fully seated, or fully released. The Nokia 8 has a bit of an 'in between' area.
A bit dissappointing but it hasn't been an issue in real-world use.
EDIT: The issue is much worse using non-mic earphones, I've noticed. They really don't seat properly.
EDIT EDIT: Just tried an in-store demo model - it was faintly better than mine, but still very, very poor compared to every other model of phone. Hard to believe Nokia could stuff up such a simple, easy part of the design.
I have the same problem... I will send my phone to repair, hoping the will do something.

Creaks right out of the box!

Lovely! This is my second device, the first had a clicky feel on the bottom of the screen where is slides into the chin. That didnt really bother me, but it would also drain battery overnight when not used (from 100 to 78) the next morning. Returned it to bestbuy (got charged $45) and repurchased (yes i am not a hater, i like the phone) but this one creaks loudly from the screen (not hinge). Anyone having similar issues?
oh great.... I am getting mine tomorrow. I purchased from B&H and I got an extended warranty warranty for 2 more years through SquareTrade at time of purchase. The product is shipping from the US to me (in Canada), and the last thing I want to put up with is "this" kind of "issues". Oh jesus, let's hope and pray FedEx delivers a creak free unit.
As for battery issues, you might want to check out what is draining and using up your battery. You can also get some None_root apps to help "Sleep" apps that are sucking power while in standby mode.
Cheers,
Crossing fingers for you. My second came from B&H. Will be giving them a call tomorrow for options, most likely will end up keeping it like this and hope for a year of trouble free foldings The one that drained battery, it was also right off the box, i do not install any app until i make sure battery issues arent app related. And i also disabled 5g which made the phone heat up quiet a lot
QC seems to leave a lot to be desired, they put a plastic on the external sceeen that came poorly applied in both lol Got to love the razr, i am all about design, so i can gladly put up with some OCD inducing issues, but not pleased with the overall experience, not at $1200 (although high end phones are getting progressively more expensive, look what apple is doing, less for more, a 64GB iphone 12 is $830 plus the charger, it ends up close to $900, i hope ppl realize demand more for their $. Im definitely NOT getting and iphone again)
The first unit I got had a consistently loud creaky hinge too and there was some friction while opening so I got a replacement and to my surprise it's absolutely quiet and smooth!! So now I consider it not normal for a hinge that makes any noise.
Got my phone today
Well, it finally arrived after FedEx messed up the delivery date that was scheduled for last Friday.
I got distracted by the fact that my phone shipped without a screen protector or "Motorola Black" screen shield. The phone shipped folded, and the box looked unopened (the security decals looked super clean unaltered) and there was zero finger prints on the phone nor the display (it's a real finger print magnet like all my other phones lol).
Thankfully, the phone opens and closes like a well oiled hydraulic mechanism that was built by NASA with 0.01% tolerance.
Great! Yeah the ones with an internal screen film and unfolded were review units. Others come with a poorly applied plastic on the external screen, and come folded. My creaky razr also offers some resistance as mentioned above, the hinge would not creak, but rather the screen when being folded, i can feel it by touching the outter screen and back. It had to do with the folding trays rather than the hinge itself. Going back for a replacement.
tessorodesoto said:
Great! Yeah the ones with an internal screen film and unfolded were review units. Others come with a poorly applied plastic on the external screen, and come folded. My creaky razr also offers some resistance as mentioned above, the hinge would not creak, but rather the screen when being folded, i can feel it by touching the outter screen and back. It had to do with the folding trays rather than the hinge itself. Going back for a replacement.
Click to expand...
Click to collapse
Damn, I feel for you bro... are you in New York, or are you shipping it back and forth. Does B&H cover the shipping fees?
I had the 2019/early 2020 version of this phone, it creaked. The 5G version I have now creaks too. Both from day 1. Moto says it's "normal."
Well, I can report that mine is like I mentioned above, it folds and opens like a well oiled mechanism. I have had it since Monday of this week. I'm hoping that I am the norm and not the exception.
But I'm getting the feeling that this phone will be pretty scarce as far as distribution and total sales.
I've had mine for 4 days now, it emits a single squeak when closing if I use the inner screen for a bit, and makes a click when opening but no creaks that I've noticed.
I think if you leave the phone opened for a long time, the creak will disappear. Mine 1st gen razr is like that
I've had mine since release day. No squeaks or creaks. Just a smooth sound whenever I flip my wrist to open. But even slower opens don't have any noises. And I've been to the beach a few times where I've had sand get in the hinges... Little bit of blowing on the hinge and what little bit of grit is left doesn't seem to be a match for the steel gears after a couple days. Back to being like new.
Sucks you got a squeaker but I would be willing to bet it is in the minority.
No such issues with my Razr, smooth and quiet, although I find the grip to be a bit tricky with one hand, I wish they would had added two tiny grip points on the top sides, to be able to use the weight of the lower half to extend the screen without the risk of dropping the phone.
No such issues with mine, either. Was gifted this phone on my B'day, and I really wasn't planning on buying one, but I intend to keep it for a bit. It's been a decent experience overall.

Categories

Resources