Please see discussion already at
https://www.reddit.com/r/Magisk/comments/yf8gyu
Security message when running an app
Hello I installed the Marriott app this morning, and when I go to run it, i get that security message along the bottom third of the screen, and the app shuts down. What is causing that?
forum.xda-developers.com
Calling on the broader community to look at this, as I only start to have this today. I have also tried HuskyDG's Magisk Delta which is said to have brought back MagiskHide, but I failed. Thanks
try this https://forum.xda-developers.com/t/guide-howto-use-banking-apps-on-your-rooted-device.4530801/
supermansaga said:
Please see discussion already at
https://www.reddit.com/r/Magisk/comments/yf8gyu
Security message when running an app
Hello I installed the Marriott app this morning, and when I go to run it, i get that security message along the bottom third of the screen, and the app shuts down. What is causing that?
forum.xda-developers.com
Calling on the broader community to look at this, as I only start to have this today. I have also tried HuskyDG's Magisk Delta which is said to have brought back MagiskHide, but I failed. Thanks
Click to expand...
Click to collapse
Thanks. It does seem to work, except I didn't perform these following steps mentioned. Maybe they are not applicable to the latest 3.1.1 version on GitHub instead of play store? Also don't think I truly understand how to use template. Finally, there is a popup to ask me to uninstall Magisk? Probably not a good idea.
Under the Preference head, tap on Select hide methods -> Check API requests, Intent queries, ID detections -> Tap OK
Under the Template config head, tap on 0 additional apps invisible -> Check Magisk, LSPosed and HMA
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
lelakon666 said:
try this https://forum.xda-developers.com/t/guide-howto-use-banking-apps-on-your-rooted-device.4530801/
Click to expand...
Click to collapse
It worked several times but has since been busted. Maybe I didn't set it up correctly?
I heard Magisk Delta by HuskyDG could hide it from detection. Has anyone been brave enough to try? Well, I tried and it didn't work. I tried the whitelist mode by leaving Marriott out of the SuList and many other banking apps too. But it still detects root. Marriott app version 10.13.1. Older version say 10.12.0 and below should survive.
marriott’s new version 10.15.0 appears to have fixed the over-detection issue. Shamiko is now 0.7.1. not sure if relevant
Related
Was anyone able to get ARCore working on OnePlus 3T??
I have tried both the original and the modified APKs of Tango Core but whenever I try to open the HelloAR app it keeps crashing after the Made with Unity screen. I made Tango Core a system app and then a new option in settings menu appered as shown in the screen shot attached and when I tap on it I get a menu saying Chose Profile but regardless of which option out of the 2 (Personal and Work) I choose it crashes. You can get the APKs from here
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Update 1:
After installing this magisk module thanks to @4RK4N and uninstalling and reinstalling the modified Tango Core and HelloAR apps (though I'm not sure if it is required to uninstall and reinstall) I got Hello AR running on my OnePlus 3T with Open Beta 13 and Magisk 13.3 thanks to topjohnwu
Update 2:
After installing the module mentioned up and getting Hello AR working I made Tango Core a system app and now I can select the Personal option in Tango in Settings but the Work option still causes crash. It shows Clear area descriptions, Permissions and View open-source license options. There are currently no apps with Permissions even though Hello AR is installed and working and the Clear area descriptions option is currently disabled.
DelicatePanda said:
Was anyone able to get ARCore working on OnePlus 3T??
Click to expand...
Click to collapse
I am also interested in using arcore on a op3.
Someone on the oneplus forum claims it is working with magisk root and pixelify module.
Didn't tried it yet, as I don't have the time to install magisk right now..
Update 1:
After installing this magisk module thanks to @4RK4N I got Hello AR running on my OnePlus 3T with open beta 13.
Update 2:
After installing the module mentioned in the previous update and getting Hello AR working I made Tango Core a system app and now I can select the Personal option in Tango in Settings but the Work option still causes crash. It shows Clear area descriptions, Permissions and View open-source license options. There are currently no apps with Permissions even though Hello AR is installed and working and the Clear area descriptions option is currently disabled.
Magisk Hide doesn't seem to be working when it comes to my automobile's app, Uconnect. I'm rooted and now the Uconnect app states that I'm using an unsupported device. It worked before rooting.View attachment magisk_log_20181022_153305.log
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
tried clearing apps data?
kamilmirza said:
tried clearing apps data?
Click to expand...
Click to collapse
Yes. I even uninstalled, then reinstalled the Uconnect app.
destiple said:
Yes. I even uninstalled, then reinstalled the Uconnect app.
Click to expand...
Click to collapse
THIS great module might help :fingers-crossed:
Destiple, can you confirm whether MagiskHide Props Config, which kamilmirza referred you to, worked?
Alternately, did you find another solution to get Uconnect working?
If you haven't already you're probably better off testing the brand new MagiskHide (rewritten from scratch) in the Canary builds (currently at build 18110).
Didgeridoohan said:
If you haven't already you're probably better off testing the brand new MagiskHide (rewritten from scratch) in the Canary builds (currently at build 18110).
Click to expand...
Click to collapse
That's very good to know. I'm nervous about running a Canary build on my normal phone, but I'll see if I can find a spare to test it on.
Will the new MagiskHide be on the next Magisk update, or is it several versions away from being in the stable build?
Try using the "Hide Magisk Manager" option in the settings. I was having the same problem, but after doing that and restarting I can use the Uconnect app again.
Coop9 said:
Try using the "Hide Magisk Manager" option in the settings. I was having the same problem, but after doing that and restarting I can use the Uconnect app again.
Click to expand...
Click to collapse
Good to know! I tried it - hiding the manager by itself wasn't enough. But once I added Uconnect to the apps being hidden, *then* the app finally loaded.
Of course, upon trying to log in, the app immediately crashes. Would that have anything to do with it being added to the MagiskHide list?
I tried opening the Mastercard Pay with Rewards app, even with Magisk Hide, and it detected root.
In logcat I can see the following :
08-05 10:14:19.881 E/RootBeer(9758): b: a() [239] - com.topjohnwu.magisk ROOT management app detected!
So it seems that the app is using the RootBeer library which determines that the presence of the Magisk app is evidence enough of root. Is there anything I can do to avoid this? Could Magisk Hide be improved so the app can't tell Magisk itself is installed?
Have you looked in the Manager settings? There's an option to hide the Manager right there...
Download this script: https://github.com/Ingan121/UDSBypass/raw/master/bootudsbypass.sh
Put it in /data/adb/service.d
Give it permissions like:
0755
And uds detection is bypassed. Make sure you hide the rootbeer app in magisk hide and magisk manager is with a random name too. Here is a screenshot of how rootbeer won't detect root:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
And while we're at it, a whole bunch of other root hiding tips:
https://www.didgeridoohan.com/magisk/MagiskHide#hn_Hiding_root_from_apps
Didgeridoohan said:
Have you looked in the Manager settings? There's an option to hide the Manager right there...
Click to expand...
Click to collapse
Thanks! I was not aware of that option, and it was enough to bypass detection.
latest ianmacd magisk build passed rootbeerfresh detection out of the box.
Dims_Camper said:
latest ianmacd magisk build passed rootbeerfresh detection out of the box.
Click to expand...
Click to collapse
Just want to point out that it's safer to use the official Canary builds (that also pass all Rootbeer checks), since the unofficial snapshots are built from code that's possibly not ready for release.
Didgeridoohan said:
Just want to point out that it's safer to use the official Canary builds (that also pass all Rootbeer checks), since the unofficial snapshots are built from code that's possibly not ready for release.
Click to expand...
Click to collapse
I see, I thought only unofficial snapshots are the only one passed rootbeer checks. Thanks!
If I hide Magisk manager, will I be able to enter this application? And will the applications have access to the root?
Ok, work ok hide Magisk manager.
Hey there, community !
I've noticed that since last update, whenever Magisk prompts for su authorization I have to press "grant" button and then touch the fingerprint to authenticate. I would like to got back to just touch the fingerprint for authorization.
I've already reinstalled Magisk, double checked configuration, cleaned up dalvik/art cache but the 'problem' persists.
TLDR;
What I want:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
What I've got:
Thanks you all !
EDIT: Wondering if it is an Android 10 "feature" rather than a magisk 'bug'
If I remember correctly, that's caused by the Magisk Manager supporting Google's new biometric authentication API (Pixel 4 face unlock) and not something that can be changed.
Penaa said:
Hey there, community !
I've noticed that since last update, whenever Magisk prompts for su authorization I have to press "grant" button and then touch the fingerprint to authenticate. I would like to got back to just touch the fingerprint for authorization.
I've already reinstalled Magisk, double checked configuration, cleaned up dalvik/art cache but the 'problem' persists.
TLDR;
What I want:
What I've got:
Thanks you all !
EDIT: Wondering if it is an Android 10 "feature" rather than a magisk 'bug'
Click to expand...
Click to collapse
They're using the new API for Biometrics. It's not actually an Android 10 feature, but just a new API... It also looked like that on older versions such as Pie (older versions than Pie aren't tested yet.)
yashinodon said:
They're using the new API for Biometrics. It's not actually an Android 10 feature, but just a new API... It also looked like that on older versions such as Pie (older versions than Pie aren't tested yet.)
Click to expand...
Click to collapse
By 'they' you mean Android or Magisk ?
Thanks for the answer !
I've been using smart capture during screenshots for years. All of the sudden the option wasn't there during a screenshot the other day. I've done all of the troubleshooting and the smart capture option in advanced features does not exist. I've uninstalled the updates, restarted my Galaxy Note 9, reinstalled the update, with no resolve.
Does anyone know how to get this feature back?
Clear system cache on the boot menu.
Try in safe mode to rule out a 3rd party app.
That didn't work either
What OS version?
Did you Google "samsung smart capture missing" etc? Doesn't have to be the same model.
Is the app present? Clear data if so.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I googled it can't find anything on where to download the smart capture app.
It is not present on my phone
But, was last month
Here's an older version from Android 9, it may work. Can't attach it, sorry.
blackhawk said:
Here's an older version from Android 9, it may work. Can't attach it, sorry.
Click to expand...
Click to collapse
Where can I find it?
Scan this with online Virustotal. It should be ok.
It's also on the Samsung Galaxy store
It's not available on the Samsung store in the version. I can't uninstall the app either. Tried to download the file you directed me to and this came up.
brl121212 said:
It's not available on the Samsung store in the version. I can't uninstall the app either. Tried to download the file you directed me to and this came up.
Click to expand...
Click to collapse
Download anyway. most downloadable things give this warning.
Apkmirror is a trusted site.
Arealhooman said:
Apkmirror is a trusted site.
Click to expand...
Click to collapse
So I should proceed then?
brl121212 said:
So I should proceed then?
Click to expand...
Click to collapse
Yes. If you ever don’t download from a trusted site, get a antivirus. But apkmirror is pretty trusted.
Once you download, click on the file to download the apk.