Related
So I own a few plasma televisions and one thing that I've done is used RGB burn in slides to evenly wear the first 100-150 hours of the television.
The idea is to wear down the elements of the display quickly and evenly during the initial phase of the device so that in the future the wear from static display elements is lessened.
Has anyone tried this on their AMOLED phone with any success?
The slides are located online. I can't link as a new member. I found them at Home Theater Shack but I just googled "plasma break in slides"
I'm using this app: Digital Photo Frame Slideshow from the Play Store
I'm running on high brightness, 1 minute between slides, no transition, no text overlay, no android ui, just the images.
I'm going to do it every night for one or two weeks.
It's pretty pseudo-sciency but hopefully this will help suppress burn in from the notification and navigation soft buttons.
Burn in is different on amoled than plasma. I'm not sure how the slides will work here. The moto x should do better than other phones since we have transparent and hiding nav and status bars. But I don't think you will truly prevent it. Then again I have a plasma that's 6 years old with no noticeable "burn in".
Sent from my XT1060 using Tapatalk
Doing so will only shorten the life of the display. Granted, the life of the display is a lot longer than you'll likely keep the phone, but still. The "Burn-in" is more like a slight deactivation of one or more of the subpixel colors of the LED. You can reduce any burn in once it does happen, but I don't know of anyone that has gotten rid of it completely. Running RGB slides also probably won't do much either to prevent it.
Since Android Wear has the screen on all the time, and the Gear Live is AMOLED wouldn't burn in be an issue? the galaxy gears on display at retail stores have a bit of a burn in problem.
nolandynamite said:
Since Android Wear has the screen on all the time, and the Gear Live is AMOLED wouldn't burn in be an issue? the galaxy gears on display at retail stores have a bit of a burn in problem.
Click to expand...
Click to collapse
From what I've read, the watches are "always on" in the sense at the screen stays on, but the lighting is turned off. So instead of having to refresh the UI every time the watch is seen, it just turns the light on. Similar to a backlight for a laptop. Display models are usually always lit so they burn in due to the display being lit 24/7.
mitch27 said:
From what I've read, the watches are "always on" in the sense at the screen stays on, but the lighting is turned off. So instead of having to refresh the UI every time the watch is seen, it just turns the light on. Similar to a backlight for a laptop. Display models are usually always lit so they burn in due to the display being lit 24/7.
Click to expand...
Click to collapse
As far as I am aware, AMOLED has no backlight...that's sort of the point...every pixel "burns" individually.
CommanderROR said:
As far as I am aware, AMOLED has no backlight...that's sort of the point...every pixel "burns" individually.
Click to expand...
Click to collapse
I said similar because not everyone is familiar with the way AMOLED's work. But the same thing occurred at his Best Buy as would any modern portable display, device is constantly lit, and resulted in burn in.
I'm sure the user has an option to turn off the display if they choose to.
Sent from my SM-N900T using XDA Premium 4 mobile app
they also have dark mode and dim (holding palm over the screen) don't they?
hopefully there'll be something within all this to prevent issues.
Only LG G Watch has "Always-on" display, Gear Live and Moto 360 have a button to turn it on and yes in the Setting you have an option to adjust the brightness.
Hreidmar said:
Only LG G Watch has "Always-on" display, Gear Live and Moto 360 have a button to turn it on and yes in the Setting you have an option to adjust the brightness.
Click to expand...
Click to collapse
After watching like, 40 videos, I'm pretty sure that they all have always on. The button on the Gear Live and the 360 are to act as a physical way of turning off the display entirely as LG allows by covering it with your palm. But yeah, from what I've seen, the Gear Live goes into the same low power greyscale mode that the G Watch goes into, and both support wrist flicking to activate the display.
DrawnToLife said:
After watching like, 40 videos, I'm pretty sure that they all have always on. The button on the Gear Live and the 360 are to act as a physical way of turning off the display entirely as LG allows by covering it with your palm. But yeah, from what I've seen, the Gear Live goes into the same low power greyscale mode that the G Watch goes into, and both support wrist flicking to activate the display.
Click to expand...
Click to collapse
I did watch about 40 videos too lol and LG G Watch was the only advertised as "screen always on" as Gear Live has Super AMOLED display and even greater resolution than LG G Watch so the Gear Live would burn out in matter of hours.
LG G has 400 Mah battery, IPS display and lower resolution so it can withstand being "always-on" for at least 36 hours as advertised.
Hreidmar said:
I did watch about 40 videos too lol and LG G Watch was the only advertised as "screen always on" as Gear Live has Super AMOLED display and even greater resolution than LG G Watch so the Gear Live would burn out in matter of hours.
LG G has 400 Mah battery, IPS display and lower resolution so it can withstand being "always-on" for at least 36 hours as advertised.
Click to expand...
Click to collapse
Except, you know, on the official Google page, and in the videos that I've seen, the screen also just times out to a low power, black and white screen (referring to the Gear Live). Super AMOLED is more power efficient in idle / dark screens due to the nature of individual pixel lightning, so I don't really understand what you mean by the Gear Live would burn out in a matter of hours (they should be relatively the same from what I can tell).
Always on = standby (i.e low brightness, dark screen). It does not mean full brightness, always coloured watch face. No way in hell. If that was the case, why would the displays time out in what appears to be 5-10 seconds?
Yeah.. I'm going to wait on conclusive battery testing before making my purchase. I've got like a week anyways, might as well.
Also, I'm legitimately concerned about screen burn in now, given the nature of AMOLED.
DrawnToLife said:
Except, you know, on the official Google page, and in the videos that I've seen, the screen also just times out to a low power, black and white screen (referring to the Gear Live). Super AMOLED is more power efficient in idle / dark screens due to the nature of individual pixel lightning, so I don't really understand what you mean by the Gear Live would burn out in a matter of hours (they should be relatively the same from what I can tell).
Always on = standby (i.e low brightness, dark screen). It does not mean full brightness, always coloured watch face. No way in hell. If that was the case, why would the displays time out in what appears to be 5-10 seconds?
Yeah.. I'm going to wait on conclusive battery testing before making my purchase. I've got like a week anyways, might as well.
Also, I'm legitimately concerned about screen burn in now, given the nature of AMOLED.
Click to expand...
Click to collapse
i've been concerned about screen burn in from time to time as well (most recently with the gnex). but then i realized it is highly unlikely i'll have the device for long enough to achieve burn in and/or notice
I've been playing with my Gear Live for a couple of days, so here's what I can tell :
- The screen is "Always On" by default, which means it will get dimmer and switch to a black background on most watch faces (and for AMOLED, black means "off").
- You can set it to turn off completely.
- In order to dim it (or turn it off depending on the settings) you can either wait, cover the screen with your hand, or use the physical button... The button is not really practical and seems to serve absolutely no purpose since you can use the screen.
- I haven't noticed any burn-in at all yet
- I think I noticed that from time to time the facewatch (I'm using the one with the digital hour in the center and analog minutes, I think it's called "digitalog" ) switches a few pixels to the right or to the left. My guess is it is to prevent burn in, I know most plasma TVs do that too.
- I had a Galaxy S2 for several years before switching to a Nexus 5, and yes, the toip of the screen where the notification bar usually is was burnt-in (or rather I think the whole screen was burnt except for this black bar). It was noticeable on full screen apps but never bothered me. Even if it happens on the Gear Live I can't see it bothering me... It's not like I'll be watching movies on it...
So my guess is you should be fine... But if you're really worried you can always disable "Always On".
BlueScreenJunky said:
I've been playing with my Gear Live for a couple of days, so here's what I can tell :
- The screen is "Always On" by default, which means it will get dimmer and switch to a black background on most watch faces (and for AMOLED, black means "off").
- You can set it to turn off completely.
- In order to dim it (or turn it off depending on the settings) you can either wait, cover the screen with your hand, or use the physical button... The button is not really practical and seems to serve absolutely no purpose since you can use the screen.
- I haven't noticed any burn-in at all yet
- I think I noticed that from time to time the facewatch (I'm using the one with the digital hour in the center and analog minutes, I think it's called "digitalog" ) switches a few pixels to the right or to the left. My guess is it is to prevent burn in, I know most plasma TVs do that too.
- I had a Galaxy S2 for several years before switching to a Nexus 5, and yes, the toip of the screen where the notification bar usually is was burnt-in (or rather I think the whole screen was burnt except for this black bar). It was noticeable on full screen apps but never bothered me. Even if it happens on the Gear Live I can't see it bothering me... It's not like I'll be watching movies on it...
So my guess is you should be fine... But if you're really worried you can always disable "Always On".
Click to expand...
Click to collapse
How is the battery though? Think you can get through a solid day with heavy notification flow? That's all I really care about.
BlueScreenJunky said:
- I think I noticed that from time to time the facewatch (I'm using the one with the digital hour in the center and analog minutes, I think it's called "digitalog" ) switches a few pixels to the right or to the left. My guess is it is to prevent burn in, I know most plasma TVs do that too.
Click to expand...
Click to collapse
I have a Gear Live, and can confirm this is true. I've seen it on multiple watch faces.
DrawnToLife said:
Except, you know, on the official Google page, and in the videos that I've seen, the screen also just times out to a low power, black and white screen (referring to the Gear Live). Super AMOLED is more power efficient in idle / dark screens due to the nature of individual pixel lightning, so I don't really understand what you mean by the Gear Live would burn out in a matter of hours (they should be relatively the same from what I can tell).
Always on = standby (i.e low brightness, dark screen). It does not mean full brightness, always coloured watch face. No way in hell. If that was the case, why would the displays time out in what appears to be 5-10 seconds?
Yeah.. I'm going to wait on conclusive battery testing before making my purchase. I've got like a week anyways, might as well.
Also, I'm legitimately concerned about screen burn in now, given the nature of AMOLED.
Click to expand...
Click to collapse
I own a Gear Live and can confirm that it does indeed have an always on display (which can be toggled from settings) that dims to gray scale when not in use just like the G Watch.
At the same time I can also confirm that having my watch now just around 3 weeks has already showed some very minor signs of burn-in. Typically when in apps or settings. As I said though its very minor and not really noticeable unless you're looking for it. That said though it is there.
Also to clear up battery life the Gear Live can withstand 36hours of always on screen. While I typically charge my watch each night I have tested it and can get it to run from one morning through to the following night before the battery reaches 5%. This is with the Always-on display option enabled.
Are you guys leaving the screen on all night when you're sleeping? I know its not lit up all the way but like the dimmed version of the screen. Like I'm using the simple clock. You think its okay to leave that on all night? I'm thinking it'll be okay cause it'll gradually change over night so it's not technically sitting on one time for 7 hours.
Sent from my XT1060 using XDA Free mobile app
tu3218 said:
Are you guys leaving the screen on all night when you're sleeping? I know its not lit up all the way but like the dimmed version of the screen. Like I'm using the simple clock. You think its okay to leave that on all night? I'm thinking it'll be okay cause it'll gradually change over night so it's not technically sitting on one time for 7 hours.
Sent from my XT1060 using XDA Free mobile app
Click to expand...
Click to collapse
I am a little worried about burn in myself so I turn the device off at night when I charge it. Even though the pixels should shift with the default watch faces I just think it's a safer bet to power it off.
Does anyone know if custom watch faces can cause screen burn in dim/always on mode?
I know that when the stock watchfaces go into the always on screen that they move a bit to avoid screen burn, but do custom watches that go into always on dim mode do the same?
Nvm, through some experimenting the answer seems to be yes they move to avoid screen burn.
babyshanks said:
Nvm, through some experimenting the answer seems to be yes they move to avoid screen burn.
Click to expand...
Click to collapse
Noob here so forgive the novice question. Does this mean the dim should be used to prevent burn? Or is it better to not have the screen always on?
pmgreen said:
Noob here so forgive the novice question. Does this mean the dim should be used to prevent burn? Or is it better to not have the screen always on?
Click to expand...
Click to collapse
A surefire way to prevent screen burn is not to have it always on. Dim will somewhat prevent it since its lower brightness. The ambient mode/always on mode moves around slightly so certain pixels are not on all the time. That said, this doesn't always work depending on the type of watch face you have. If you have a large shape for instance, pixels in the middle of said shape may always be on which could lead to faster screen burn. Personally I leave it always on with watch faces that have thin and simple ambient modes. With the small shifts in positioning I'm not worried about screen burn, and considering I don't really expect to use this watch for more than a year and half it has become a non-issue for me.
My Mi 9 display is starting to burn in the fingerprint image after just 2 months of usage. I'm going to turn off the fingerprint unlock to prevent it getting worse.
Does this sound normal?
Doesn't sound normal but AMOLED displays are know for burn in marks. For that to happen you need to have the fingerprint image always on display. I got a MI9 and the finger print image dissapear after some time and reappear if I lift the phone so its almost impossible in a normal usage to burn in the display.
What kind of burn-in is it? Is it the icon, or is it from the strong light that lights up the fingerprint at scanning? The fingerprint icon must show at the same place all the time unlike the rest of the AOD. I can se how keeeping the icon on at the exact same place all the time 24/7 may hurt an AMOLED display. I turned off, both AOD and fingerprint icon, after a day or so to save battery. Now it shows only on the lockscreen for a few seconds.
gerhard_wa said:
What kind of burn-in is it? Is it the icon, or is it from the strong light that lights up the fingerprint at scanning? The fingerprint icon must show at the same place all the time unlike the rest of the AOD. I can se how keeeping the icon on at the exact same place all the time 24/7 may hurt an AMOLED display. I turned off, both AOD and fingerprint icon, after a day or so to save battery. Now it shows only on the lockscreen for a few seconds.
Click to expand...
Click to collapse
So I had seen it as a sort of retention of the fingerprint image that appears on the lockscreen. I saw it when I was walking outside in full sun today. I quickly installed an app to check different colours full screen (dead pixel fix) and it clearly showed the burn in for several colours.
But now that I'm home, I tried again the screen check app and the burn in is gone!
So I wonder if it was either just temporary retention, or if I need to be outside in full sun to see the burn.
dvanders said:
So I had seen it as a sort of retention of the fingerprint image that appears on the lockscreen. I saw it when I was walking outside in full sun today. I quickly installed an app to check different colours full screen (dead pixel fix) and it clearly showed the burn in for several colours.
But now that I'm home, I tried again the screen check app and the burn in is gone!
So I wonder if it was either just temporary retention, or if I need to be outside in full sun to see the burn.
Click to expand...
Click to collapse
Please come back here and tell us if you see it again. It would be good to know if the display is this sensitive to permanent burn-in. Keeping the icon shut off at the AOD would probably be a good idea, I find it rather easy to hit the right spot after some time of practice in the blind.
That what you have seen on sun isnt burn in, that is normal see-through screen becase sensor is under display.
No need to panic, i seen it too but that is not a problem.
Same as marko378, it's totally normal to see this on bright daylight, it's not a bur in.
Its the finger print sensor and i see it at day one
No problem bro enjoy your phone
---------- Post added at 12:13 AM ---------- Previous post was at 12:05 AM ----------
Its the finger print sensor and i see it at day one
No problem bro enjoy your phone
Nice, today in full sun I confirmed what you're all saying. It's the sensor, the hole behind the screen, and it's only visible at certain angles in full sun.
Thanks to you all for helping
That's normal because the scanner is under the screen so it has to be a little transoarent there to work that's why In screen scanners are mainly used by oled displays. Enjoy the phone
dvanders said:
So I had seen it as a sort of retention of the fingerprint image that appears on the lockscreen. I saw it when I was walking outside in full sun today. I quickly installed an app to check different colours full screen (dead pixel fix) and it clearly showed the burn in for several colours.
But now that I'm home, I tried again the screen check app and the burn in is gone!
So I wonder if it was either just temporary retention, or if I need to be outside in full sun to see the burn.
Click to expand...
Click to collapse
It is not safe for the screen in my opinion to maintain the figerprint area always lighted. I use it as per default setting that dimly lights it when I take the phone and then in few seconds it disappeared even if I touch the screen. More than 1 year with the phone and no burning in the screen.
Hello all, my past 3 AMOLED phones have been facing burn-in where the keyboard is displayed as I tend to chat a lot! Can anyone give me an option to avoid it? Please don't troll and say use less keyboard!
Might help if you keep the brightness on the lower side, other than that seems like catch22
Also choose a darker theme for the keyboard.
Maddmatt said:
Also choose a darker theme for the keyboard.
Click to expand...
Click to collapse
That's why it kept happening for me... The I turn it to light mode and then the burn in goes away!
Dark mode will help reduce it, but I leave my phone set to auto switch light and dark mode based on sunrise and sunset, this way whatever app I'm using also switches, so the light and dark apps, flip button colours as well so anything white on a black screen also becomes black on a white screen so it helps reverse any burnin in that sense too.
For example, texting apps usually also have white icons at the top which can burn in with dark mode, so if you switch to light mode, the same icons are now black on a white screen, so the screen burns but the icons don't, so it all slowly burns in together and nothing becomes noticeable.
Been doing this after getting burnin on my S10+ using only darkmode and light icons left burnin. And then on my S20 Ultra I did the flipping light and dark mode and never had issues but I also had the full screen settings to hide the pinhole camera so it made the entire top black, and then One UI 3.0 came out and they removed that option so now you can't hide the pinhole camera and I had a burnin bar across the top from where it was black lol.
Now on my S21 Ultra I have the light and dark mode set to flip at sun rise and sun set, and I can't hide the pin hole so maybe third phone is the charm here and I won't have any burnin at all this time haha.
Hope this helps.
There is no burn in with AMOLEDs; they have a finite lifespan and get dimmer as they age before finally failing after many 10's of thousands hours.
Don't over drive them by using them at maximum or near maximum levels.
High energy blue pixels are the most susceptible to damage, red the least because of its longer wavelength.
Use manual brightness control. Avoid going much over 50%.
Using full brightness reduces pixel lifespan as probably does high temperatures ie direct sunlight.
Limit usage at full brightness by the second*.
Using manual control ensures you're aware of it and keeps the phone from auto jacking it up on you when not really needed.
Turn it down in low light; don't burn out your retina's as they aren't replaceable.
Use dark mode whenever possible. Use dark or black wallpaper. You Good Lock to get rid of the stutus bar icons; simply use the pull down notification screen.
My 10+ gets heavy usage every day with a lot of keyboard time. At 15+ months there is no discernible weakness or dead pixels of any color at any brightness level.
*this is especially important with static images
bANONYMOUS said:
Dark mode will help reduce it, but I leave my phone set to auto switch light and dark mode based on sunrise and sunset, this way whatever app I'm using also switches, so the light and dark apps, flip button colours as well so anything white on a black screen also becomes black on a white screen so it helps reverse any burnin in that sense too.
For example, texting apps usually also have white icons at the top which can burn in with dark mode, so if you switch to light mode, the same icons are now black on a white screen, so the screen burns but the icons don't, so it all slowly burns in together and nothing becomes noticeable.
Been doing this after getting burnin on my S10+ using only darkmode and light icons left burnin. And then on my S20 Ultra I did the flipping light and dark mode and never had issues but I also had the full screen settings to hide the pinhole camera so it made the entire top black, and then One UI 3.0 came out and they removed that option so now you can't hide the pinhole camera and I had a burnin bar across the top from where it was black lol.
Now on my S21 Ultra I have the light and dark mode set to flip at sun rise and sun set, and I can't hide the pin hole so maybe third phone is the charm here and I won't have any burnin at all this time haha.
Hope this helps.
Click to expand...
Click to collapse
you say you had burn in from keeping a black bar in the area where the pinhole was?
that doesnt make any sense. If it was black those pixels were off and there wouldnt be any burn in
ಠ_ಠ
Get Gboard, And change it to a dark skin, I've never had any problems
sesnut said:
If it was black those pixels were off and there wouldnt be any burn in
Click to expand...
Click to collapse
Reverse burn in, the screen area being used has a yellowish tone to it from being worn in over time, no matter how long the display is on, it's always burning in and the colour always adjusts over time from the burn in, it's the image retention burn in that people talk about, but the entire screen is always burning the entire time it's used. So by never using the top area the pixels are fresh and have a cooler tone to them than the rest of the screen as a result of this.
VICosPhi said:
Might help if you keep the brightness on the lower side, other than that seems like catch22
Click to expand...
Click to collapse
Indeed. And to add, perhaps occasionally change from white to black keyboard to even things out.
This is a good one. Says something about fast charging and not showing this message again. Guess they forgot to check don’t show again.
No offence but:
Pay 1.2K for phone after you see super HDR, huge brightness etc. and then limit everything to minimum? Seriously?
If I see them, I will ask EE(my phone provider) to replace it. I had same issue with OP 7 Pro, screen burn ins, they have replaced phone.
joloxx9joloxx9 said:
No offence but:
Pay 1.2K for phone after you see super HDR, huge brightness etc. and then limit everything to minimum? Seriously?
If I see them, I will ask EE(my phone provider) to replace it. I had same issue with OP 7 Pro, screen burn ins, they have replaced phone.
Click to expand...
Click to collapse
Some countries like the UK have better consumer laws than others.
Sukrith said:
Hello all, my past 3 AMOLED phones have been facing burn-in where the keyboard is displayed as I tend to chat a lot! Can anyone give me an option to avoid it? Please don't troll and say use less keyboard!
Click to expand...
Click to collapse
From normal use there will be no burnin. However, if you keep your display on showing the keboard all the time it will burn in. Also pixels start to burn in once they are on
kpwnApps said:
From normal use there will be no burnin. However, if you keep your display on showing the keboard all the time it will burn in. Also pixels start to burn in once they are on
Click to expand...
Click to collapse
Mate - I had burn ins on my screen from things like clock etc, you cannot get rid of them, and it is a design flown, as long there is nothing in instruction etc.
joloxx9joloxx9 said:
Mate - I had burn ins on my screen from things like clock etc, you cannot get rid of them, and it is a design flown, as long there is nothing in instruction etc.
Click to expand...
Click to collapse
Samsung shifts the AOD clock to help prevent this. However I use only tap on AOD now.
Perps know the deal, organic LEDs have a finite lifespan. Yeah you can drive your car as fast as it will go but you probably don't because you know it wouldn't last very long.
You wonder why the price tag keeps going up?
Freebies are never free.
Using in direct sunlight or at 80+% is just asking for it. In most cases completely avoidable. One can at least limit the time of use at full brightness and not have a homescreen that looks like a Vegas billboard.
blackhawk said:
Samsung shifts the AOD clock to help prevent this. However I use only tap on AOD now.
Perps know the deal, organic LEDs have a finite lifespan. Yeah you can drive your car as fast as it will go but you probably don't because you know it wouldn't last very long.
You wonder why the price tag keeps going up?
Freebies are never free.
Using in direct sunlight or at 80+% is just asking for it. In most cases completely avoidable. One can at least limit the time of use at full brightness and not have a homescreen that looks like a Vegas billboard.
Click to expand...
Click to collapse
So they should not sell them in countries like Spain etc as there is too much sun
joloxx9joloxx9 said:
So they should not sell them in countries like Spain etc as there is too much sun
Click to expand...
Click to collapse
I live in Texas desert, the sun here is intense.
It burns out LED traffic lights all the time; OLEDs are far less tolerant.
Simply use in the shade.
The individual pixels are microscopic. That they work at all is amazing let alone being capable of high lumen output with extremely excellent color/gamma rendering.
The AMOLED matrix has 10's of thousands of active solid state components not just the OLED pixels themselves. All are hest sensitive plus the fact the display is helping to dissipate mobo heat while producing heat of it's own. The most heat sensitive component, the OLED is smack on top of this glass heatsink*.
Direct sunlight in especially high ambient temperatures is a real bad plan. You can fry any display like this.
Know, understand and respect their limitations. You will be rewarded with a long lived gorgeous display.
*glass is a good thermal insulator. Do tempered glass protective screens increase the thermal burden? Most likely. If cool at first the added mass will be protective but once the device (or the sun) heats that mass up things will go down hill from there and the display temperature will rapidly climb.
joloxx9joloxx9 said:
So they should not sell them in countries like Spain etc as there is too much sun
Click to expand...
Click to collapse
Common sense should prevail I guess. I live in a place hotter than Spain. If I were to use my device in the middle of the day in bright sun light it’ll cook after 15mins. Hence why I don’t. But then would any other device.
blackhawk said:
I live in Texas desert, the sun here is intense.
It burns out LED traffic lights all the time; OLEDs are far less tolerant.
Simply use in the shade.
The individual pixels are microscopic. That they work at all is amazing let alone being capable of high lumen output with extremely excellent color/gamma rendering.
The AMOLED matrix has 10's of thousands of active solid state components not just the OLED pixels themselves. All are hest sensitive plus the fact the display is helping to dissipate mobo heat while producing heat of it's own. The most heat sensitive component, the OLED is smack on top of this glass heatsink*.
Direct sunlight in especially high ambient temperatures is a real bad plan. You can fry any display like this.
Know, understand and respect their limitations. You will be rewarded with a long lived gorgeous display.
*glass is a good thermal insulator. Do tempered glass protective screens increase the thermal burden? Most likely. If cool at first the added mass will be protective but once the device (or the sun) heats that mass up things will go down hill from there and the display temperature will rapidly climb.
Click to expand...
Click to collapse
And this was me think you lived in the Mojave desert.