Related
Hi friends, I currently have the version V405UA020f 00 USC US OP 0310 installed, and I need to go back to some version of ATT since I need it to ask me for the unlock network code. I have downloaded the backup of the user @AsItLies but I don't know how to restore it from QFIL, can someone guide me? I have tried loading only the .xml file but when pressing Download I immediately get an error.
romanrsr said:
Hi friends, I currently have the version V405UA020f 00 USC US OP 0310 installed, and I need to go back to some version of ATT since I need it to ask me for the unlock network code. I have downloaded the backup of the user @AsItLies but I don't know how to restore it from QFIL, can someone guide me? I have tried loading only the .xml file but when pressing Download I immediately get an error.
Click to expand...
Click to collapse
I've not had much luck getting qfil to load a backup, but you could post a screenshot of what you have before it doesn't work, someone may be able to help.
2 ways that will definitely work; 1) do ea partition one at a time (yes, it's time consuming) 2) use bkerler edl utilities (these are python based and it's a command line interface).
So now you know of course, but for anyone else, crossflashing does not unlock the sim. If it's locked, stay on oem firmware until you get it unlocked. Or else u face the prob romanrsr is facing now.
cheers
AsItLies said:
I've not had much luck getting qfil to load a backup, but you could post a screenshot of what you have before it doesn't work, someone may be able to help.
2 ways that will definitely work; 1) do ea partition one at a time (yes, it's time consuming) 2) use bkerler edl utilities (these are python based and it's a command line interface).
So now you know of course, but for anyone else, crossflashing does not unlock the sim. If it's locked, stay on oem firmware until you get it unlocked. Or else u face the prob romanrsr is facing now.
cheers
Click to expand...
Click to collapse
Hi AsItLies, Thank you very much for sharing your knowledge!
I have been able to flash partition 0 with QFIL, there were no errors but now the phone does not turn on at all. I have put it to charge for more than an hour but it shows no signs of life. It is also not detected by the PC when I connect it. Do you know how I can solve it? Thanks again!
romanrsr said:
Hi AsItLies, Thank you very much for sharing your knowledge!
I have been able to flash partition 0 with QFIL, there were no errors but now the phone does not turn on at all. I have put it to charge for more than an hour but it shows no signs of life. It is also not detected by the PC when I connect it. Do you know how I can solve it? Thanks again!
Click to expand...
Click to collapse
I can only guess, as that isn't usual. It may well still be in edl mode. To get out of edl, hold vol minuse and pwr button for at least 5 sec. And also, leaving it in edl mode, it will 'time out', but it doesn't auto boot by itself.
iirc, when flashing the 'luns' in qfil, after ea one it will reboot and u have to go back to edl mode again.
when you say you 'flash partition 0 with QFIL', is that with the xml? or you did all of slot A by hand (one by one)?
cheers
AsItLies said:
I can only guess, as that isn't usual. It may well still be in edl mode. To get out of edl, hold vol minuse and pwr button for at least 5 sec. And also, leaving it in edl mode, it will 'time out', but it doesn't auto boot by itself.
iirc, when flashing the 'luns' in qfil, after ea one it will reboot and u have to go back to edl mode again.
when you say you 'flash partition 0 with QFIL', is that with the xml? or you did all of slot A by hand (one by one)?
cheers
Click to expand...
Click to collapse
I do not think it is in EDL mode, since when I connect it to the PC it does not detect any port, and in the device manager it does not detect it either. I've already tried hold vol minuse and pwr button for several seconds, but nothing happens. Screen always black.
I have flashed from QFIL with the xml.
romanrsr said:
I do not think it is in EDL mode, since when I connect it to the PC it does not detect any port, and in the device manager it does not detect it either. I've already tried hold vol minuse and pwr button for several seconds, but nothing happens. Screen always black.
I have flashed from QFIL with the xml.
Click to expand...
Click to collapse
pretty sure that if edl mode 'times out' (because it hasn't been used or accessed), then it's not going to show up in device manager.
yes the flashing with qfil and the xml will need to go out of edl mode and back in for ea lun. Flashing the 0 lun alone isn't going to fix anything, have to do them all.
Your only option here is to keep trying. There's no magical 'press this button' to fix this. If you try and can't get it out of edl mode, try going back in edl mode. The device will go into edl mode from any screen, but in some cases you won't get any kind of a 'count down', you just have to count or maybe the screen will change, then spam vol up.
good luck
AsItLies said:
pretty sure that if edl mode 'times out' (because it hasn't been used or accessed), then it's not going to show up in device manager.
yes the flashing with qfil and the xml will need to go out of edl mode and back in for ea lun. Flashing the 0 lun alone isn't going to fix anything, have to do them all.
Your only option here is to keep trying. There's no magical 'press this button' to fix this. If you try and can't get it out of edl mode, try going back in edl mode. The device will go into edl mode from any screen, but in some cases you won't get any kind of a 'count down', you just have to count or maybe the screen will change, then spam vol up.
good luck
Click to expand...
Click to collapse
You were correct! I Press the volume down + power keys, and then pressing the up key several times the QFIL detected it again. I have already flashed your backup and boot OK.
Now I have the following problem, when I insert another SIM it does not appear to enter the unlock code, but I get the error "This phone is permanently locked and can not be unlocked", did you have any experience with this?
It occurred to me to try to update it to the latest version via FOTA and LG Software, but it tells me that the latest version is already installed. Can you think of something? Thanks!
Unfortunately I've no experience there at all, always buy phones that are unlocked, have never had a carrier locked phone.
check with at&t, if the device is eligible to be unlocked, I think they are obligated by law to help.
cheers
AsItLies said:
Unfortunately I've no experience there at all, always buy phones that are unlocked, have never had a carrier locked phone.
check with at&t, if the device is eligible to be unlocked, I think they are obligated by law to help.
cheers
Click to expand...
Click to collapse
Many Thanks AsItLies, I ask you one last question. I have found some files in the forum (AT&T Android 10 (30b) .bin files), but they don't have the .xml files. Do you know how I can flash these files with QFILL or how to generate the .xml?
romanrsr said:
Many Thanks AsItLies, I ask you one last question. I have found some files in the forum (AT&T Android 10 (30b) .bin files), but they don't have the .xml files. Do you know how I can flash these files with QFILL or how to generate the .xml?
Click to expand...
Click to collapse
Which files exactly are you referring to? There are some files because of IMEI and serial number that you should not flash.
AsItLies said:
Which files exactly are you referring to? There are some files because of IMEI and serial number that you should not flash.
Click to expand...
Click to collapse
Check this:
File folder on MEGA
mega.nz
File folder on MEGA
mega.nz
File folder on MEGA
mega.nz
romanrsr said:
Check this:
File folder on MEGA
mega.nz
Click to expand...
Click to collapse
Use this xml. I created it to flash Q all at once, there aren't 0-6 luns, as the names are unique and not needed.
But just as a warning, it should work, I've used it, but it's only been tested on my device, which was originally at&t. And, I'd point out, doing this isn't going to unlock the sim.
cheers
My Phone is bricked during the updation with fastboot enhance tool so now my phone is in powerd off state not working with button combination even no detection with my laptop please help me if anyone have or know the solution
Well i can maybe suggest you this there is a lot of help in this group if you need too maybe they can find out a solution for you
┤Mod Edit├┤Telegram link removed as it did not meet posting requirements├
Khalid Ghouri said:
My Phone is bricked during the updation with fastboot enhance tool so now my phone is in powerd off state not working with button combination even no detection with my laptop please help me if anyone have or know the solution
Click to expand...
Click to collapse
i have same problem
Khalid Ghouri said:
My Phone is bricked during the updation with fastboot enhance tool so now my phone is in powerd off state not working with button combination even no detection with my laptop please help me if anyone have or know the solution
Click to expand...
Click to collapse
What happened where did it go wrong?
Johnstan725 said:
What happened where did it go wrong?
Click to expand...
Click to collapse
when flash payload.bin, i got an error ''the following partition to flash may be unknown'' than i check the option ''ignor unknown partitions'' after complete the flashing payload.bin my phone bricked and no battery life !
Well I want to help so I copied and paste Theo from the oneplus 10 pro group on telegram what i posted here i hope this tutorial might help you
I didn't make this tutorial so if this works join the group and thank @docnok63 i don't know if this is also his XDA name if so then you can thank him on XDA
With an unlocked bootloader, Fastboot Enhance allows you to flash stock OOS without relocking the bootloader like MSM. It can also be used to downgrade your OS without losing data. To use it, download it from Github and:
1) Put the phone in fastboot mode and connect to PC
2) Launch the Fastboot Enhance app and double-click your connected device
3) Click the “Reboot to Fastbootd” button
4) Once in fastbootd, click the Flash Payload.bin button. If you get a warning about cow files, ignore and hit the Yes button
5) Select the FULL OTA.zip of your choice (incremental patches not allowed.)
6) The app will extract the payload.bin from the full zip and begin flashing automatically. Do NOT touch your device or close the app during this time or you risk bricking your device
7) Once done flashing, you will get a “Operation completed” dialogue box. Hit Okay and then hit the “Reboot to System” button. Profit.
HessNL said:
Well I want to help so I copied and paste Theo from the oneplus 10 pro group on telegram what i posted here i hope this tutorial might help you
I didn't make this tutorial so if this works join the group and thank @docnok63 i don't know if this is also his XDA name if so then you can thank him on XDA
With an unlocked bootloader, Fastboot Enhance allows you to flash stock OOS without relocking the bootloader like MSM. It can also be used to downgrade your OS without losing data. To use it, download it from Github and:
1) Put the phone in fastboot mode and connect to PC
2) Launch the Fastboot Enhance app and double-click your connected device
3) Click the “Reboot to Fastbootd” button
4) Once in fastbootd, click the Flash Payload.bin button. If you get a warning about cow files, ignore and hit the Yes button
5) Select the FULL OTA.zip of your choice (incremental patches not allowed.)
6) The app will extract the payload.bin from the full zip and begin flashing automatically. Do NOT touch your device or close the app during this time or you risk bricking your device
7) Once done flashing, you will get a “Operation completed” dialogue box. Hit Okay and then hit the “Reboot to System” button. Profit.
Click to expand...
Click to collapse
1) Put the phone in fastboot mode and connect to PC
First step is not possible for me because my phone completely turned off no option work for me, no pc detection and no any button combination to putting in fastboot mode or etc.....
Khalid Ghouri said:
1) Put the phone in fastboot mode and connect to PC
First step is not possible for me because my phone completely turned off no option work for me, no pc detection and no any button combination to putting in fastboot mode or etc.....
Click to expand...
Click to collapse
Did you install the drivers correctly because we have some drivers in the telegram group who are working properly i couldn't even find my device 9 pro with msm until I had those drivers maybe that's the problem to but I don't know I wish I could help you further i also placed your problem in the telegram and they want to help you but then you need to explain the steps you did
HessNL said:
Did you install the drivers correctly because we have some drivers in the telegram group who are working properly i couldn't even find my device 9 pro with msm until I had those drivers maybe that's the problem to but I don't know I wish I could help you further i also placed your problem in the telegram and they want to help you but then you need to explain the steps you did
Click to expand...
Click to collapse
can you please send me the driver link which is there telegram group
steps which i did
1. unlock the bootloader successfully
2. download the indian version android 12 and extract the payload.bin file
3. flash payload.bin file with fastboot enhance tool after complete the flash process device reboot and its happen for me
Khalid Ghouri said:
steps which i did
1. unlock the bootloader successfully
2. download the indian version android 12 and extract the payload.bin file
3. flash payload.bin file with fastboot enhance tool after complete the flash process device reboot and its happen for me
Click to expand...
Click to collapse
You didn't have to unpack the file you could can flash it with the zip file it fastboot enhance unpacks it self but i can't share you the drivers there already there downloaded i could download then and send then to you
I copied and paste this from the group there it's they are download links
OnePlus USB (all purpose/data transfer):
OnePlus-USB-Drivers.zip
drive.google.com
Google USB driver (for fastboot & ADB):
Get the Google USB Driver | Android Studio | Android Developers
The Google USB Driver is required to perform adb debugging on Windows with Google devices.
developer.android.com
Qualcomm drivers (for MSM):
Qualcomm_Drivers_Setup.exe
drive.google.com
Khalid Ghouri said:
steps which i did
1. unlock the bootloader successfully
2. download the indian version android 12 and extract the payload.bin file
3. flash payload.bin file with fastboot enhance tool after complete the flash process device reboot and its happen for me
Click to expand...
Click to collapse
same happened here without extracting payload.bin before
Same here No way on earth to turn the Phone on in any way!
i think its perma bricked
OnePlus picked up my phone. Looking forward to their reply
My phone also brick.
I also try payload.bin in fastboot enhanced tool.
Completely done.
Now my phone is not turning on.
No pc connect.
No charging connect.
No power on.
Anyone can help me.??
Zeescorpion said:
My phone also brick.
I also try payload.bin in fastboot enhanced tool.
Completely done.
Now my phone is not turning on.
No pc connect.
No charging connect.
No power on.
Anyone can help me.??
Click to expand...
Click to collapse
Nobody knows what the problem is. you are not the only one. No solution yet
Is that somebody that know a link to download that some is now.
Im not coming in in my phone, no usb
How could i start usb-dubugging on my phone??
zelma83 said:
Im not coming in in my phone, no usb
How could i start usb-dubugging on my phone??
Click to expand...
Click to collapse
Hey are you still having problems? Do you have a windows device to troubleshoot with?
I know you had a Mac before.
What state is your phone currently in? Still unable to boot?
You can force your phone off by holding the power button and both volume keys for an extended period of time, the phone will vibrate when it does, from then just hold down and power until it powers on, it may take a few seconds but it'll land you on a black page with recovery as one of the options, once in recovery choose from the 3 language options, from here with the up and down vol keys and power you should be able to wipe your system and recovery your phone, you will lose the content but this should work.
The only other option is to boot to the bootloader then use fastboot commands to put the OS back, or use fastboot enhance.
Welp, first day of owning the OnePlus Ace and I've already bricked it lmao. Need some help in trying to unbrick it.
So last night I successfully rooted my device using magisk, but after experimenting I just decided to revert back to being unrooted, since I realised I didn't actually need many of the functions root allows. Derooted using Magisk, checked that it was unrooted, then went into fastboot mode to re-lock the bootloader. Did so, restarted and I was presented with the dreaded "The current image (boot/recovery) have been destroyed" error screen and endless bootlooping. I cannot access fastboot mode or recovery mode with button combinations, tried holding Vol + and power, Vol - and power but no dice. I believe I ended up bricking because I forgot to flash the stock vbmeta.img before locking the bootloader.
I've made some progress in getting to the MediaTek Emergency Download Mode (which I believe is also either called BROM or Preloader) in order to flash a stock rom. I found out that holding down both Vol + and Vol - at boot will enable this emergency download mode for a few seconds, before going to the destroyed boot/recovery error screen. The issue is, while I've managed to get the phone detected by my computer in this state in COM5 as a 'MediaTek PreLoader USB VCOM_V1632 (Android), none of the programs said to flash a stock rom will detect it. I've tried mtk_client, mtk bypass tool, SP Flash, even regular fastboot and adb tools, but none of them will detect the device, even though Windows does.
The only smart thing I did was refraining from transferring all of my files from my old phone to this one, so luckily I've got a phone to fall back on. Basically, until I find a fix, the Ace will have to stay in it's box makes me wish I never messed with root in the first place lmao. And because I imported the phone there's no warranty and no service centres for OnePlus in my country that can help.
Anyone have any ideas for how I can get the phone detected in these applications? Is it an issue of the SoC not being supported yet by these programs because it's relatively new? Are there any alternate ways to get to the fastboot menu? Any help would be greatly appreciated!
Thanks!
Update: If someone would be able to extract a scatter file from their own OnePlus Ace too, I think that may help me
Sorry that you've ran into this, but thanks for confirming bootloader can be unlocked, and root is possible.
Getting the 10R over the Realme GT 2 (sad situation of bootloader unlock not possible). Hope you get an extract soon
Made some progress!
Got my hands on the Ace's firmware files, which included the scatter file. Redownloaded the newest 6.2 version of SP Flash Tool and loaded the scatter and auth files successfully. Clicked download, connected USB to phone while holding Vol + and Vol - and finally! Sp Flash Tool connected to the phone! However, now I've run into another problem: SP Flash Tool will show a red progress bar at the bottom saying 'Download DA', it will reach 100% quickly then throw me a very vague error simply saying 'error_msg'. And that's it. Tried unchecking different boxes, reinstalled drivers but it will always throw back this error.
Any ideas to figure out what the error is and fix it would be amazing
hello, im here to show support. My ace also bricked because i want to change from color os to oxygen. I used fastboot enhanced, might have missed a step and bricked. Mine also import, but the shop i bought offers 1 year warranty. Shop says have to wait for msm download tools to reflash or i have to pay $60 to send back to China because my own fault. Man, it is going to be a long wait for msm tools. haha
KeepingKeyes said:
saying 'error_msg'.
Click to expand...
Click to collapse
try the mtk client and command - python mtk payload,and try sp flashtool again.please also share the files for firmware
DimRim said:
try the mtk client and command - python mtk payload,and try sp flashtool again.please also share the files for firmware
Click to expand...
Click to collapse
Tried this method, but didn't work. Kept giving me a "Handshake failed: retrying" error when connecting the phone to the computer.
Here's a link the the firmware: OnePlus Ace Firmware
KeepingKeyes said:
Tried this method, but didn't work. Kept giving me a "Handshake failed: retrying" error when connecting the phone to the computer.
Here's a link the the firmware: OnePlus Ace Firmware
Click to expand...
Click to collapse
maybe this is because of the new chip and there is no support for bypassing it.I thought the method would work.also a tip-edit the scatter file, namely partition_name: super or system,changing the value is_download: false to is_download: true.hopefully help
And thank you for sharing the files
I too am stuck with Brick.
Is there a Bypass for the Demesity 8100 being developed?
This device is mostly Oppo, but there is no Oppo flash Tool?
There is very little information available.
KeepingKeyes said:
Welp, first day of owning the OnePlus Ace and I've already bricked it lmao. Need some help in trying to unbrick it.
So last night I successfully rooted my device using magisk, but after experimenting I just decided to revert back to being unrooted, since I realised I didn't actually need many of the functions root allows. Derooted using Magisk, checked that it was unrooted, then went into fastboot mode to re-lock the bootloader. Did so, restarted and I was presented with the dreaded "The current image (boot/recovery) have been destroyed" error screen and endless bootlooping. I cannot access fastboot mode or recovery mode with button combinations, tried holding Vol + and power, Vol - and power but no dice. I believe I ended up bricking because I forgot to flash the stock vbmeta.img before locking the bootloader.
I've made some progress in getting to the MediaTek Emergency Download Mode (which I believe is also either called BROM or Preloader) in order to flash a stock rom. I found out that holding down both Vol + and Vol - at boot will enable this emergency download mode for a few seconds, before going to the destroyed boot/recovery error screen. The issue is, while I've managed to get the phone detected by my computer in this state in COM5 as a 'MediaTek PreLoader USB VCOM_V1632 (Android), none of the programs said to flash a stock rom will detect it. I've tried mtk_client, mtk bypass tool, SP Flash, even regular fastboot and adb tools, but none of them will detect the device, even though Windows does.
The only smart thing I did was refraining from transferring all of my files from my old phone to this one, so luckily I've got a phone to fall back on. Basically, until I find a fix, the Ace will have to stay in it's box makes me wish I never messed with root in the first place lmao. And because I imported the phone there's no warranty and no service centres for OnePlus in my country that can help.
Anyone have any ideas for how I can get the phone detected in these applications? Is it an issue of the SoC not being supported yet by these programs because it's relatively new? Are there any alternate ways to get to the fastboot menu? Any help would be greatly appreciated!
Thanks!
Click to expand...
Click to collapse
Still stuck or were you able to find any solution?
yashaswee1708 said:
Still stuck or were you able to find any solution?
Click to expand...
Click to collapse
Unfortunately not yet, the most promising option will be to wait for an MTK Auth Bypass utility to be developed for the Dimensity 8100 chipset. There might be active development on this front, so hopefully it will come soon.
The other option would be to find someone to do a remote flash, someone who has official Oppo/OnePlus flashing software and an account to use it. I believe I've found the official firmware to flash the phone in this state, however you need credentials to log in to it and access it. I think it will also specifically have to be Chinese credentials, as India login details may not allow you to flash a OnePlus Ace model. I tried to get someone over at (<Moderator Edit>: unallowed site name removed) to do a remote flash, and he couldn't because he had India credentials, but not Chinese credentials
KeepingKeyes said:
Unfortunately not yet, the most promising option will be to wait for an MTK Auth Bypass utility to be developed for the Dimensity 8100 chipset. There might be active development on this front, so hopefully it will come soon.
The other option would be to find someone to do a remote flash, someone who has official Oppo/OnePlus flashing software and an account to use it. I believe I've found the official firmware to flash the phone in this state, however you need credentials to log in to it and access it. I think it will also specifically have to be Chinese credentials, as India login details may not allow you to flash a OnePlus Ace model. I tried to get someone over at (<Moderator Edit>: unallowed site name removed) to do a remote flash, and he couldn't because he had India credentials, but not Chinese credentials
Click to expand...
Click to collapse
Oh. I had OnePlus 7 previously, there were few ways to flash stock firmware. The common one was MSM Tool, other one was Fastboot enhance.
But few times I flashed stock firmware manually like payload dump payload.bin and flash partitions manually from fastboot. Maybe this could work.
yashaswee1708 said:
Oh. I had OnePlus 7 previously, there were few ways to flash stock firmware. The common one was MSM Tool, other one was Fastboot enhance.
But few times I flashed stock firmware manually like payload dump payload.bin and flash partitions manually from fastboot. Maybe this could work.
Click to expand...
Click to collapse
I seem to have made fastboot inaccessible on my device, so I've been unable to use Fastboot enhance or utilise any ways to flash using fastboot
Damn!! I hope you find some way to fix your device. Good luck.
关于一加ACE如何优雅的刷入氧OS12.1这件事 来自 天伞桜 - 酷安
I create instruction, if you phone boot to fastboot mode
OnePlus 10R/Ace - Официальные прошивки - 4PDA
OnePlus 10R/Ace - Официальные прошивки
4pda.to
i`ts in russian, but you can use translate
GTAstar said:
I create instruction, if you phone boot to fastboot mode
OnePlus 10R/Ace - Официальные прошивки - 4PDA
OnePlus 10R/Ace - Официальные прошивки
4pda.to
i`ts in russian, but you can use translate
Click to expand...
Click to collapse
Hello. after unlocking the bootloader I have the message "Orange State. OS Not Being Verified Or Custom OS. Dismiss After 5 Seconds." but the system booted up. After uploading boot.img, the phone got stuck in bootloop. Unfortunately, the guide above did not help.
hamsteer said:
Hello. after unlocking the bootloader I have the message "Orange State. OS Not Being Verified Or Custom OS. Dismiss After 5 Seconds." but the system booted up. After uploading boot.img, the phone got stuck in bootloop. Unfortunately, the guide above did not help.
Click to expand...
Click to collapse
Are you still able to boot to Fastboot?
yashaswee1708 said:
Are you still able to boot to Fastboot?
Click to expand...
Click to collapse
Yes. I can flash files in cmd and FastbootEnhance but in practice it looks like they were not saved.
hamsteer said:
Yes. I can flash files in cmd and FastbootEnhance but in practice it looks like they were not saved.
Click to expand...
Click to collapse
So you are not able to boot right?
If not, you can try flashing the partitions manually from fastboot. (If you are willing to try I can provide the steps. This works for other OnePlus devices.)
Can anyone please help me? I did the all steps but nothing works and I get the STATUS_EXT_RAM_EXCEPTION (0xC0050005) error... The only solution I found is to drain the battery while the device is bootlooping but sadly, my phone vibrates 1 second and dies because there is no fastboot or recovery or nothing to boot with, I tried SP Flash Tool but it stucks at Download DA 100% then shows me the ram error. PLEASE HELP ME
P.S: I know people will say MTK Bypass is a virus but please ignore it and focus on my main subject
Use latest fastboot rom and download agent to mtk all.bin
Restart phone by power+ volume key
Also usb dk driver and libusb tool
Or remove back cover and battery take care with fingerprint
Already done everything you said, nothing works.
iOussamato_ said:
Already done everything you said, nothing works.
Click to expand...
Click to collapse
Try again
faisal9666 said:
Try again
Click to expand...
Click to collapse
What do you mean try again? I tried it 50 times and still doesn't work, tried so many other roms and DAs and NOTHING
iOussamato_ said:
What do you mean try again? I tried it 50 times and still doesn't work, tried so many other roms and DAs and NOTHING
Click to expand...
Click to collapse
Very strange
STATUS_EXT_RAM_EXCEPTION (0xC0050005)
1.
Hello bro, I only registered on XDA to inform you and gonna post on other thread for people suffering from this error.
2.
I have redmi 9c angelica
3.
I had the same issue like yours. Just fixed it 2,3 mins ago after many days of suffering. I tried 3 fastboot roms in which only this work (angelica_global_images_V12.0.12.0.QCRMIXM_20210412.0000.00_10.0_global). I hope it also work with you. Give a try
i followed this and boom now all of my stress has been released.
Firmware link
How to Unbrick Redmi 9C (angelica) without using auth account. Tested and working! - OmBob Opreker
This is tutorial how to unbrick Xiaomi Redmi 9C (angelica) using mediatek bypass tool and sp flash tools without using mi auth account using global stock
ombob.my.id
iOussamato_ said:
Can anyone please help me? I did the all steps but nothing works and I get the STATUS_EXT_RAM_EXCEPTION (0xC0050005) error... The only solution I found is to drain the battery while the device is bootlooping but sadly, my phone vibrates 1 second and dies because there is no fastboot or recovery or nothing to boot with, I tried SP Flash Tool but it stucks at Download DA 100% then shows me the ram error. PLEASE HELP ME
P.S: I know people will say MTK Bypass is a virus but please ignore it and focus on my main subject
Click to expand...
Click to collapse
use this video 100% working
Device locked and need test point. You can't use MTK bypass and SP Flashtool directly. Your device may have patch on July 2022 and newest version (12.5.3 and above).
And if you see 3 dot pin for TP, it's Redmi 9c but if you found only 1 point (for TP), it's Redmi 9c NFC.
Remember to use TP for any operation and if not work, TP with Professional software.
demoimoet said:
Device locked and need test point. You can't use MTK bypass and SP Flashtool directly. Your device may have patch on July 2022 and newest version (12.5.3 and above).
And if you see 3 dot pin for TP, it's Redmi 9c but if you found only 1 point (for TP), it's Redmi 9c NFC.
Remember to use TP for any operation and if not work, TP with Professional software.
Click to expand...
Click to collapse
where are test points located?
Exact same issue,
exact same error,
exact everything.
I ended up flashing using KERDISH Team's SP Flash Tool BUT it still does not wanna boot
When I press the combination to boot into fastboot it vibrates but and shows a screen for a split second.
When I try to boot it up normally it just shows again a screen for a split seccond
And when I try to boot into recovery using again the combination it shows AGAIN the screen for a split secconds
Any help appriciated!
ax0 said:
Exact same issue,
exact same error,
exact everything.
I ended up flashing using KERDISH Team's SP Flash Tool BUT it still does not wanna boot
When I press the combination to boot into fastboot it vibrates but and shows a screen for a split second.
When I try to boot it up normally it just shows again a screen for a split seccond
And when I try to boot into recovery using again the combination it shows AGAIN the screen for a split secconds
Any help appriciated!
Click to expand...
Click to collapse
did you try Yurian's post info, my phone was totally bricked and thats what kinda worked, I left extensive guides on how I did it on there too
also, here are the files that worked for me (redmi 9a, not the exact same but its pretty similar)
your ROMs should be these (use the fastboot one, to the best of my knoledge, the recovery one only changes the recovery hence, its useles to unbrick) if that doesnt work try ROMs for different regions or a one previous version (I dont recomend this because MI is super against downgrading so they f-up your phone if you try) always with the fastboot one
the scatter should be on ROM/images
if that scatter doesnt work, try the ones I provided, theyre for a different version but hey, in for a pound, if its already hard bricked you may as well try crazy stuff, I would suggest you look for the correct scatters online, but I have some slight experience looking for android files and I couldnt find any that are the correct ones.
Lastly, Im just a nobody that unbricked his device and got a little confident, I know next to nothing about phone config, that said, I do think I know more than most but I dont know if scatter files are completely imposible to be compatible between versions or even the ROMs, most Custom ROM work in both 9a and 9c so I think they might, but IDK.
Ivan.Adriazola said:
did you try Yurian's post info, my phone was totally bricked and thats what kinda worked, I left extensive guides on how I did it on there too
also, here are the files that worked for me (redmi 9a, not the exact same but its pretty similar)
your ROMs should be these (use the fastboot one, to the best of my knoledge, the recovery one only changes the recovery hence, its useles to unbrick) if that doesnt work try ROMs for different regions or a one previous version (I dont recomend this because MI is super against downgrading so they f-up your phone if you try) always with the fastboot one
View attachment 5859871
the scatter should be on ROM/images
if that scatter doesnt work, try the ones I provided, theyre for a different version but hey, in for a pound, if its already hard bricked you may as well try crazy stuff, I would suggest you look for the correct scatters online, but I have some slight experience looking for android files and I couldnt find any that are the correct ones.
Lastly, Im just a nobody that unbricked his device and got a little confident, I know next to nothing about phone config, that said, I do think I know more than most but I dont know if scatter files are completely imposible to be compatible between versions or even the ROMs, most Custom ROM work in both 9a and 9c so I think they might, but IDK.
Click to expand...
Click to collapse
Hello! Thanks so much for replying
I still get the same issue, it just shows a screen for a split secconds and then turns off
if you wan
ax0 said:
Hello! Thanks so much for replying
I still get the same issue, it just shows a screen for a split secconds and then turns off
Click to expand...
Click to collapse
t to some day we could hop on a discord call and see if I can help you in any way, although I doubt it since our hardwares arent exactly the same
Ivan.Adriazola said:
if you wan
t to some day we could hop on a discord call and see if I can help you in any way, although I doubt it since our hardwares arent exactly the same
Click to expand...
Click to collapse
sure my discord is axon#7061
same problem but fixed,try tft free tool.here are the steps.
1.remove battery connection,do not connect untill flashed
2.open tft tool,go to mtk section flash scatter
3.connect mobile while holding both volume bouttons
4.now tft tool starts flashing but failed & rebooting device
5.now remove cable & connect battery,bootup
Hoping this should work for you,mine is fixed that way
brav3h3ar8 said:
same problem but fixed,try tft free tool.here are the steps.
1.remove battery connection,do not connect untill flashed
2.open tft tool,go to mtk section flash scatter
3.connect mobile while holding both volume bouttons
4.now tft tool starts flashing but failed & rebooting device
5.now remove cable & connect battery,bootup
Hoping this should work for you,mine is fixed that way
Click to expand...
Click to collapse
thank you so much
idk why but TFT managed to fix it!
ax0 said:
thank you so much
idk why but TFT managed to fix it!
Click to expand...
Click to collapse
It's my pleasure
ax0 said:
sure my discord is axon#7061
Click to expand...
Click to collapse
Hello, please add me, I'm desperate how to do this :-(
ax0 said:
Exact same issue,
exact same error,
exact everything.
I ended up flashing using KERDISH Team's SP Flash Tool BUT it still does not wanna boot
When I press the combination to boot into fastboot it vibrates but and shows a screen for a split second.
When I try to boot it up normally it just shows again a screen for a split seccond
And when I try to boot into recovery using again the combination it shows AGAIN the screen for a split secconds
Any help appriciated!
Click to expand...
Click to collapse
Hi,
Just follow the steps and you'll be good.
[Guide] How to unbrick redmi 9C by flashing with SP Tools without Auth file(Tested Working)
This is a last ditch effort to restore your phone to working order. This should only be used if your phone DOES NOT BOOT AT ALL or if you are unable to boot into FASTBOOT. If you can boot into Fastboot mode then I would encourage you to flash...
forum.xda-developers.com
I already tried it with my device and it works well.
Hello everyone!
I hope this is seen, because I need your help, well, days ago I wanted to install the pixel experience rom, everything was going well, but when it was installed, I had problems with wifi, and only worked with mobile data (it should be noted that it was Android 13 and my version is merlin). Well, then I decided to change it and return it to stock rom but it has been a tragedy since then. First, I think that being mediatek, the device does not allow to be flashed with mitool, I've tried everything, install twrp but did not serve and now does not let me enter fastboot, what do you recommend? It could be solved (by myself or a technician), or better I give it as dead? I hope your prompt response
estebg_1300 said:
Hello everyone!
I hope this is seen, because I need your help, well, days ago I wanted to install the pixel experience rom, everything was going well, but when it was installed, I had problems with wifi, and only worked with mobile data (it should be noted that it was Android 13 and my version is merlin). Well, then I decided to change it and return it to stock rom but it has been a tragedy since then. First, I think that being mediatek, the device does not allow to be flashed with mitool, I've tried everything, install twrp but did not serve and now does not let me enter fastboot, what do you recommend? It could be solved (by myself or a technician), or better I give it as dead? I hope your prompt response
Click to expand...
Click to collapse
Miflash works with Qualcomm and Media Tek but for the latter it is better to use
https://xiaomitools.com/sp-flash-tool-en/
The problem is that the phone must be in Fastboot mode.
https://sourceforge.net/projects/recovery-for-xiaomi-devices/files/merlin/
TWRP/O.F A11 et A12
Have you tried with the TWRP of:
Wipe/format data type yes
reboot TWRP
flash a recovery rom
bro, try this one, though it was for redmi 6A.
I think the method there could be tried on other xiaomi phones.
goodluck!
Fix HardBrick Redmi 6A (no recovery and no fastboot, only black screen)Fix without need Authotization stuff
----------------------------------------------------------------------- Finally I could fix my redmi 6A after suffering hardbrick. I couldnot enter to recovery neither to fastboot mode. My redmi 6A just give me a black screen with vibration on...
forum.xda-developers.com
Tajil said:
bro, try this one, though it was for redmi 6A.
I think the method there could be tried on other xiaomi phones.
goodluck!
Fix HardBrick Redmi 6A (no recovery and no fastboot, only black screen)Fix without need Authotization stuff
----------------------------------------------------------------------- Finally I could fix my redmi 6A after suffering hardbrick. I couldnot enter to recovery neither to fastboot mode. My redmi 6A just give me a black screen with vibration on...
forum.xda-developers.com
Click to expand...
Click to collapse
Bro, do you know what to put in download agent, scatter loading file and authenticator file?, it gives me an error
NOSS8 said:
Miflash works with Qualcomm and Media Tek but for the latter it is better to use
https://xiaomitools.com/sp-flash-tool-en/
The problem is that the phone must be in Fastboot mode.
https://sourceforge.net/projects/recovery-for-xiaomi-devices/files/merlin/
TWRP/O.F A11 et A12
Have you tried with the TWRP of:
Wipe/format data type yes
reboot TWRP
flash a recovery rom
Click to expand...
Click to collapse
And how I can flash the recovery rom if my phone doesnt power on, and xiaomi mi tool doesnt recognize too my phone? I cant enter in fastboot and recovery mode, help me please
estebg_1300 said:
And how I can flash the recovery rom if my phone doesnt power on, and xiaomi mi tool doesnt recognize too my phone? I cant enter in fastboot and recovery mode, help me please
Click to expand...
Click to collapse
In the 1st post you say you have installed the TWRP.
See here
https://forum.xda-developers.com/t/recover-from-hard-brick-no-fastboot-or-recovery.4469431/
https://forum.xda-developers.com/t/...otloop-hard-brick-softbrick-solution.4460191/
https://forum.xda-developers.com/t/tool-rom2box-all-in-one-frp-flashing-unlocking-tool.4477349/
NOSS8 said:
En la primera publicación dices que tienes instalado el TWRP.
Mira aquí
https://forum.xda-developers.com/t/recover-from-hard-brick-no-fastboot-or-recovery.4469431/
https://forum.xda-developers.com/t/closed-evergo-100-working-poco-m4-pro-5g-redmi-note-11t-india-miui-all-mediatek-devices-bootloop-hard- ladrillo-softbrick-solution.4460191/
https://forum.xda-developers.com/t/tool-rom2box-all-in-one-frp-flashing-unlocking-tool.4477349/
Click to expand...
Click to collapse
Is there a way that we can talk privately and I can explain better and you can guide me to do the procedure?
estebg_1300 said:
Is there a way that we can talk privately and I can explain better and you can guide me to do the procedure?
Click to expand...
Click to collapse
Sorry but I only have Qualcomm devices.
See with the links above or do some research.
EDIT:
You must install specific drivers to see the phone on the pc.
NOSS8 said:
Sorry but I only have Qualcomm devices.
See with the links above or do some research.
EDIT:
You must install specific drivers to see the phone on the pc.
Click to expand...
Click to collapse
how I do the last that you say?
estebg_1300 said:
how I do the last that you say?
Click to expand...
Click to collapse
I posted some links that might be useful, that's all.
I searched with:
Xiaomi mediatek hard bricked, no fastboot
For example:
https://phonesinnigeria.com/unbrick-hard-bricked-dead-mtk-android-device/
"First connect your phone to your pc, if your pc does not make the sound of usb connection, press the volume key (up or down) on your device till you hear sound on your pc, and also your phone will start vibrating but if it does not vibrate keep on pressing the volume key (up or down) as many times as possible till your phone start vibrating. Then it starts connecting and disconnecting in your pc."
NOSS8 said:
I posted some links that might be useful, that's all.
I searched with:
Xiaomi mediatek hard bricked, no fastboot
For example:
https://phonesinnigeria.com/unbrick-hard-bricked-dead-mtk-android-device/
"First connect your phone to your pc, if your pc does not make the sound of usb connection, press the volume key (up or down) on your device till you hear sound on your pc, and also your phone will start vibrating but if it does not vibrate keep on pressing the volume key (up or down) as many times as possible till your phone start vibrating. Then it starts connecting and disconnecting in your pc."
Click to expand...
Click to collapse
now I get 'the last usb device you connected did not work properly and Windows does not recognize it'.
What should I do now?
estebg_1300 said:
now I get 'the last usb device you connected did not work properly and Windows does not recognize it'.
What should I do now?
Click to expand...
Click to collapse
Maybe change the usb port or install other drivers, but as I told you above, I don't know the tools for MediaTek but it's much easier to restore them for free than the Qualcomm ones.
Do some research on the internet and take the time to fully understand.
NOSS8 said:
Maybe change the usb port or install other drivers, but as I told you above, I don't know the tools for MediaTek but it's much easier to restore them for free than the Qualcomm ones.
Do some research on the internet and take the time to fully understand.
Click to expand...
Click to collapse
and you know anyone that know about mtk and can help me? Thanks btw
estebg_1300 said:
and you know anyone that know about mtk and can help me? Thanks btw
Click to expand...
Click to collapse
See here
https://forum.xda-developers.com/f/redmi-note-9-guides-news-discussion.10961/
Maybe him
VD171
forum.xda-developers.com
download agent (DA), already filled if we use spflash. if not just browse and search inside spflash folder (there 3 to 4 DA file there).
scatter file, you get it from the stock firmware, extract the firmware, check inside the folder. you could directly browser from scatter input to the firmware folder.
auth file, just donload it from the link, extract it and in spflash-- auth file input just browse the file
exactly what I did here, u could do it bro:
Tajil said:
bro, try this one, though it was for redmi 6A.
I think the method there could be tried on other xiaomi phones.
goodluck!
Fix HardBrick Redmi 6A (no recovery and no fastboot, only black screen)Fix without need Authotization stuff
----------------------------------------------------------------------- Finally I could fix my redmi 6A after suffering hardbrick. I couldnot enter to recovery neither to fastboot mode. My redmi 6A just give me a black screen with vibration on...
forum.xda-developers.com
Click to expand...
Click to collapse
Tajil said:
download agent (DA), already filled if we use spflash. if not just browse and search inside spflash folder (there 3 to 4 DA file there).
scatter file, you get it from the stock firmware, extract the firmware, check inside the folder. you could directly browser from scatter input to the firmware folder.
auth file, just donload it from the link, extract it and in spflash-- auth file input just browse the file
Click to expand...
Click to collapse
Thanks, but read and trying translate to spanish for english, this error appears in every time that i try to put the phone in my pc
Tajil said:
exactly what I did here, u could do it bro:
Click to expand...
Click to collapse
usb device is not recognized
the last device you connected to this computer did not work and Windows does not recognize it.' is what appears in the image I sent you
estebg_1300 said:
usb device is not recognized
the last device you connected to this computer did not work and Windows does not recognize it.' is what appears in the image I sent you
Click to expand...
Click to collapse
it maybe driver issues
try installing some driver needed:
-mtk driver
-libusb-win
-xiaomi usb driver
-vcom driver
-etc ...
Tajil said:
it maybe driver issues
try installing some driver needed:
-mtk driver
-libusb-win
-xiaomi usb driver
-vcom driver
-etc ...
Click to expand...
Click to collapse
now I have this problem...
Hi everyone, days ago I posted on the forum that I had a bootloop, I could not enter fastboot or recovery, well, I managed to install the rom by sp flash tool without errors, but now I get the error "nv data is corrupted" as seen in the video that I attach, anyone know of a viable solution? What is free and do not have any other problem and my phone back to normal? Because I can enter fastboot and maybe download or twrp or download pixel experience or a rom, What do you recommend?