Hello, i was just scrolling when the phone went out and then showed me "The system has been destroyed" Issue.
I have tried using XiaomiTool but it sends an error MissingServiceTokenCookie.
I also tried using mi flash but to no avail it sends out error. Pertaining to locked bootloader.
I did try flashing the .bat files on powershell but also it returns an error regarding locked bootloader.
Is there any possible way to fix this?
The phone is all stock no customizations done.
PS: I can still access the recovery but when i tried connecting to MI Assistant through MISuite it could not detect the device even though it is connected. Have tried different ports including USB3 but still cannot detect it.
Related
Hi guys, for the last couple of days I've been trying to flash miui on my A2 with the guide that's in this forum, but can't boot into EDL mode. I have unlock the bootloader (both oem unlock and unlock_critical) but I still can't boot into EDL with any of the methods I found online. Fastboot seems to recognize the commands sent by A2 Toolkit but just leaves a blank screen with no blinking led, and the flash utility doesn't seem to recognize any phone connected (it shows an "specified is not cast" error, that also shows when my phone isn't conected). Also, it doesn't seem to show in device manager, but I do hear the "new device connected" sound that windows runs when I plug it in with this blank screen. I have reinstalled the drivers with the flashing tool, but didn't seem to change anything.
Anyway, that's what happened to me, am I missing something that needs to be done in order to boot into EDL? Im running windows 10 btw
Thanks in advance
Hi,
so i got a situation here that xiaomi mi a2 (6x) out of nowhere rebooted to factory recovery with message "cant load android system. your data may be corrupt. If you continue to get this message you may need to perform factory reset deleting all data stored on this device"
Now after turning it off and on, it shows black screen "failed to boot" with option to power off or restart.
When restarting it goes to factory recovery again with that message and option to factory reset or try again (restart)
Now i cant perform factory reset before backing up the data, but i cant find the way to backup.
There is no custom recovery to download files from phone. When tried to flash custom recovery found out i cant because bootloader locked. And when found the way (dont know i it works) to unlock it without loosing data - cant do even that because developer options must be enabled to allow unlocking and debugging, so i get message in adb console FAILED (remote: Flashing Unlock is not allowed.
Is there any other way to keep the data before doing factory reset ?
Maybe try to flash with miflash keeping the data
blazessdd said:
Maybe try to flash with miflash keeping the data
Click to expand...
Click to collapse
unfortunately miflash cant do anything with locked bootloader as well. Just when starts to flash, gets error with bluetoth_a.
After research i noticed that miflash does nothing special at all just automated flash commands. In rom directory you can find flashing .bat files and run them in adb console.
When did that got all the data log, that bluetooth a is the first file that is tried to flash and stuck on locked bootloader.
Hello. Did you manage to solve your problem?
I have the same saituation.
Hi, unfortunately the only way i found is EDL mode.
https://youtu.be/i3OU4DOd7aY
When you keep those pins shorted, plug usb to your pc, and then , simply said, pc sees it as another device that can be flashed with everything locked.
So i flashed with miflash with keeping files option, but all that was saved is locking pattern. All media files lost.
Anyway, now i rooted and installed custom recovery to avoid any incident like this.
andjar said:
Hi, unfortunately the only way i found is EDL mode.
https://youtu.be/i3OU4DOd7aY
When you keep those pins shorted, plug usb to your pc, and then , simply said, pc sees it as another device that can be flashed with everything locked.
So i flashed with miflash with keeping files option, but all that was saved is locking pattern. All media files lost.
Anyway, now i rooted and installed custom recovery to avoid any incident like this.
Click to expand...
Click to collapse
you should edited rawprogram0.xml to not flash userdata (for saving your data)
Well if i only had this info 2 moths ago...
At leats others with this problem can find solution here now.
Hello everyone
My brother's Mi A2 is bricked for no reason. I tried to solve this problem and searched a lot but didn't manage to solve it. I hope you can help.
* before telling my story here is some stuff to know:
- The phone was running official firmware and bootloader is locked, I've never played with it's software before.
- Oem unlocking option isn't turned on.
- The phone doesn't go to recovery mode, only fastboot or regular boot.
- I used EDL mode in every flashing attempt.
- I don't remember that there is a mi account assigned to the device.
* Here is what happened:
- The phone suddenly shut down during a call and never passed the AndroidOne logo after that.
- Tried EDL mode and miflash to flash the latest firmware. Flashing completed successfully but the phone still stuck on the androidone logo.
- Did it again and again but the result was constant.
- Tried flashing older firmware "Oreo 8.1" but during flashing system.img the process stopped with an error. (I don't remeber what the error was).
- I tried to turn on the phone but after showing AndroidOne logo This message appeared:
"Your device is corrupt. It can't be trusted and will not boot.
Visit this link on another device: g.co/ABH"
and the device shuts down in a minute.
Hint: Sometimes when I try to turn one the phone the above message appears after androidone logo and sometimes the device just keep showing the logo.
- Trying to flash any firmware version by using Miflash Beta gives an error message "Can not found programmer file" immediately. when I try again it gives: "can't read from port COM4", Changing the port gives the same error with different port number.
-When I use any other version of "Portable miflash", The flashing process starts normally but fails when trying to flash "dsp.img", giving an error of "writing time out".
- I tried reinstalling all drivers needed with no change at all.
I hope that you guys can help me solving this problem.
Thank you so much!
Try EDL mode opening your phone...
Badotti said:
Try EDL mode opening your phone...
Click to expand...
Click to collapse
I did.
Bootloader is locked, so EDL mode was the only way. But now I get error writing timed out while flashing any firmware version.
Ahmed A. Mohsen said:
I did.
Bootloader is locked, so EDL mode was the only way. But now I get error writing timed out while flashing any firmware version.
Click to expand...
Click to collapse
https://www.youtube.com/watch?v=wav1xNdJzII
Youtube you find several tutorials, work and open the phone ...
Badotti said:
https://www.youtube.com/watch?v=wav1xNdJzII
Youtube you find several tutorials, work and open the phone ...
Click to expand...
Click to collapse
I opened the phone and used edl mode already but the problem is still present.
up
Have you tried to use qfil? See in the 3d dedicated to conversion A2 <> 6x
HTCDevil said:
Have you tried to use qfil? See in the 3d dedicated to conversion A2 <> 6x
Click to expand...
Click to collapse
This needs bootloader to be unlocked and my device's bootloader is locked.
Any solutions?
Go to service center this is last option you save RIP mi a2 ?
As I can see from picture you have posted, your bootloader is unlocked.
SkullSatan88 said:
Go to service center this is last option you save RIP mi a2
Click to expand...
Click to collapse
They refused to receive my device because I bought it from another country.
bomil said:
As I can see from picture you have posted, your bootloader is unlocked.
Click to expand...
Click to collapse
when I checked bootloader status in the beginning it was locked.
Are you sure that it's now unlocked?
Text me on telegram. @dejavutr
Hi Guys,
My MI-A2 is stuck in bootloop ( When I turn on my phone it shows its Android One logo and then it shutdown itself ).
In my phone, I didn't turn on any USB Debugging or and OEM unlocking. and now it is possible as the phone is not starting.
I am able to access fastboot and recovery options
I tried to do factoryReset the device from the recovery option but it is just wiping the data.
here are the following things which I have tried with fastboot.
- I tried to unlock the fastboot with MiFlashUnlock but it stops at 99% and gives me the error of unable to verify the device,
- flashing the Stock ROM isn't working with MiFlashTool. giving random errors.
- tried changing the drive partition. it gives error to unlock the device first.
- tried tried to flash TWRP but it also gives me the error of unlocking the device first.
Almost every command of Fastboot is giving me some kind of error
But I am able to access the ADB Sideload from the recovery option.
- I tried to load the April OTA update from ADB Sidelode. The update is Successfully installed. But the device is still in bootloop.
Saving User data is not my priority. I just want the device to be working anyhow. As per my assumption, Fastboot is not an option for me unless it unlocked. I think something from the ADB sideload can be done.
Any help will be appreciated.
Is it a Guide?
Oh, now, its a Great News!
Please delete this post from this forum.
As I have already wrote to you, questions should go to "Questions and Answers" forum.
And as I have already wrote to you, Search works here, and if you've used it, you'd get answers (in mentioned above forum):
1. MiA2 having A/B slots architecture, - is supposed to recover to the other slot X when OTA corrupts ROM is slot Y, - after numerous boot attempts.
2. In case you have tampered phone with try-and-see operations without knowing what you were doing - the only way to recover phone is: TEST Point / EDL. Search these keywords in this forum for appropriate Guide.
try the "fastboot continue" command
dillu12 said:
Hi Guys,
My MI-A2 is stuck in bootloop ( When I turn on my phone it shows its Android One logo and then it shutdown itself ).
In my phone, I didn't turn on any USB Debugging or and OEM unlocking. and now it is possible as the phone is not starting.
I am able to access fastboot and recovery options
I tried to do factoryReset the device from the recovery option but it is just wiping the data.
here are the following things which I have tried with fastboot.
- I tried to unlock the fastboot with MiFlashUnlock but it stops at 99% and gives me the error of unable to verify the device,
- flashing the Stock ROM isn't working with MiFlashTool. giving random errors.
- tried changing the drive partition. it gives error to unlock the device first.
- tried tried to flash TWRP but it also gives me the error of unlocking the device first.
Almost every command of Fastboot is giving me some kind of error
But I am able to access the ADB Sideload from the recovery option.
- I tried to load the April OTA update from ADB Sidelode. The update is Successfully installed. But the device is still in bootloop.
Saving User data is not my priority. I just want the device to be working anyhow. As per my assumption, Fastboot is not an option for me unless it unlocked. I think something from the ADB sideload can be done.
Any help will be appreciated.
Click to expand...
Click to collapse
you need to flash the phone in edl mode
**just be careful there is a timeout ..when you put it into edl you need miflash and rom.loaded
*** download a stock fastboot stable pie for jasmine
**** unzip amd select revelant xml from within miflash
*****on phone manually boot to fastboot mode with buttons
****** run command "fastboot oem.edl"
*******device will boot to black screen ... immediately go to miflash and press the button to start flashing
___BE CAREFUL__ select clear all tick box at bottom of miflash screen
this should be enough to rescue your device regardless of what you've done or whether you unlocked bootloader or not
I have my friends Xiaomi mi 8. It keeps freezing on the miui screen when booting up. It simply won't boot up. The bootloader is locked and I've tried everything. I've tried flashing new firmware via fastboot I've tried flashing twrp and orange fox I've even tried tried flashing pixel experience but the bootloader doesn't allow it. I've downloaded the XiaoMitool v2 and mi flash tool but nothing is working. When I boot to recovery and try to wipe data it just gives an error saying it's failed. I tried using the edl boot bat file and when it reboots to edl it just restarts and freezes on miui. ive tried edl from the back pins on the phone but the computer isnt recognising it and ive got the qualcom drivers installed but still no luck. Also when I try flashing miui fastboot firmware the program gives an error saying something about the flash script. Is there anything I can do to fix it or to atleast unlock the bootloader remotely without the need of the phone being turned on? ive heard of the msm tool but i coulnt find anything for the mi 8 only oneplus. Any help is appreciated thanks!