Related
Hello i was using this guide :
http://forum.xda-developers.com/nexus-6/general/how-to-nexus-6-one-beginners-guide-t2948481
to root my phone i went and finished fastboot oem unlock step
the problem is after it and booted the phone i extracted the root files and clicked on it
then realized it said oem is not enabled in developer option
so now when i boot the phone a message says"Your Device is Corrupt. It can't be trusted and may not work properly."
and after it like 1-2 sec it turns off
i can still boot in bootloader
PLEASE SOME ONE HELP ME
Also it says device is unlocked in the bootloader statues code 3
extra information i was using android marshmallow 6 latest firmware
oudric said:
Hello i was using this guide :
http://forum.xda-developers.com/nexus-6/general/how-to-nexus-6-one-beginners-guide-t2948481
to root my phone i went and finished fastboot oem unlock step
the problem is after it and booted the phone i extracted the root files and clicked on it
then realized it said oem is not enabled in developer option
so now when i boot the phone a message says"Your Device is Corrupt. It can't be trusted and may not work properly."
and after it like 1-2 sec it turns off
i can still boot in bootloader
PLEASE SOME ONE HELP ME
Also it says device is unlocked in the bootloader statues code 3
extra information i was using android marshmallow 6 latest firmware
Click to expand...
Click to collapse
The same thing happened to me when I tried to use a rootkit method for rooting the phone when it apparently knew nothing about the most recent updates (MRA58N or MRA58R). I ended up having to manual flash each individual image file from the MRA58N factory image (the flash-all script in the factory image zip wouldn't work). Even so, when I rebooted it still displayed the Your Device is Corrupt message. Then I went through the manual root process again (flashed the modified boot.img through fastboot, then flashed the latest TWRP recovery via fastboot, and then used TWRP to flash the latest SuperSU. Only then did the Your Device is Corrupt message go away and I also had root with everything else working fine.
It definitely made for an un-Godly horrible first 24-hours with my new phone! I hope this helps you.
internetpilot said:
The same thing happened to me when I tried to use a rootkit method for rooting the phone when it apparently knew nothing about the most recent updates (MRA58N or MRA58R). I ended up having to manual flash each individual image file from the MRA58N factory image (the flash-all script in the factory image zip wouldn't work). Even so, when I rebooted it still displayed the Your Device is Corrupt message. Then I went through the manual root process again (flashed the modified boot.img through fastboot, then flashed the latest TWRP recovery via fastboot, and then used TWRP to flash the latest SuperSU. Only then did the Your Device is Corrupt message go away and I also had root with everything else working fine.
It definitely made for an un-Godly horrible first 24-hours with my new phone! I hope this helps you.
Click to expand...
Click to collapse
can you please tell me steps i am so afraid to do anything to my phone now and i think my problem is same as yours
i downloaded 6.0.0 (MRA58R) and i used option in toolkit flash stock it gave me an error
"failed (data transfer failure (unknown error))
Its not so easy to brick nexus, but make sure you don't lock bootloader before your phone is working right. You can find the guide how to flash it on XDA.
You will need to flash the missing files by hand.
I was able to fix the erro i got by flashing by :
setting up environmental variable
copy all the flash files, all.bat bootloaderXXX.img... etc to platform tools folder
made sure i connected into usb 2.0 port not usb 3.0
then i flashed the stock firmware XD now my phone to point zero again
oudric said:
I was able to fix the erro i got by flashing by :
setting up environmental variable
copy all the flash files, all.bat bootloaderXXX.img... etc to platform tools folder
made sure i connected into usb 2.0 port not usb 3.0
then i flashed the stock firmware XD now my phone to point zero again
Click to expand...
Click to collapse
You don't need to move the files to the platform-tools folder.
Go to Nexus 6 General > Sticky rol-up thread > Adb and fastboot. What is it?
This will tell you how to set up and use adb or fastboot properly.
**UPDATE RESOLVED**
For anyone who searches and has same problems.
I needed an sdcard to get the files onto the phone.
To recap - it was stuck in boot, TWRP would load and stated no OS installed.
1. In rooting guide as per Here download file linked in the guide and unzip.
2. From folder 3 of that zip file there is a folder called data containing stock.img - place this onto sdcard.
3. Then go to this thread and download the files as hosted on mega.nz - over 2 gig.
4. Extract that zip to the sd card so that on the card is a folder called 'dload'
5. To confirm, the dload folder should have update.app and 2 folders called dt and hw
6. Put sdcard into phone.
7 .Boot into TWRP
8. Goto install, select storage, select your sdcard then select stock.img, agree to install, ignore message about no os.
9.Once that has installed my phone just restarted, EMUI came up, read the dload folder automatically and ran.
Then once phone started it found a newer update and installed that.
Phone is now working, unrooted and bootloader is locked again.
All this was found on the XDA site, just across various posts.
Thanks again to all.
********ORIGINAL BELOW********
Hi all.
Please help, I'm a ****!
I unlocked bootloader with Huawi code from thier website.
Then I installed TWRP
Which in turn installed SuperSU
All rooted, jobs a fish. as per - This one and This thread.
Decided I dont need root anymore.
Tried to reset and wipe the phone.
Went into TWRP did a factory reset wipe.
Then went into TWRP again and did advanced wipe, and selected everything.
(yes yes i know, what a tit)
So after that i get the 'this phones is unsecured' message, press up vol 3 seconds, press power button to conti, wait 5 seconds etc.
so I wait, and it sticks on 'Your device is booting'
Restart, can get into stock recovery and hisuit will see the phone and try to restore it but fails and say my device is not supported??
Can get into erecovery and connected to wifi to try and update but does not find anything to download.
can get into twrp.
I have downloaded a stock rom as per -- This ROM
Perhaps this is not the correct ROM, but then how do i find out the correct ROM needed now I can not access phone details?
Forced that onto SD card but TWRP will not run it and says it is corrupt.
I can see it with ADB and device manager so my question really is....HELP??
How can i get just stock rom back onto it and then un-root and re-lock the bootloader?
Cheers in advanced.
fabgav said:
Hi all.
Please help, I'm a ****!
I unlocked bootloader with Huawi code from thier website.
Then I installed TWRP
Which in turn installed SuperSU
All rooted, jobs a fish. as per - This one and This thread.
Decided I dont need root anymore.
Tried to reset and wipe the phone.
Went into TWRP did a factory reset wipe.
Then went into TWRP again and did advanced wipe, and selected everything.
(yes yes i know, what a tit)
So after that i get the 'this phones is unsecured' message, press up vol 3 seconds, press power button to conti, wait 5 seconds etc.
so I wait, and it sticks on 'Your device is booting'
Restart, can get into stock recovery and hisuit will see the phone and try to restore it but fails and say my device is not supported??
Can get into erecovery and connected to wifi to try and update but does not find anything to download.
can get into twrp.
I have downloaded a stock rom as per -- This ROM
Perhaps this is not the correct ROM, but then how do i find out the correct ROM needed now I can not access phone details?
Forced that onto SD card but TWRP will not run it and says it is corrupt.
I can see it with ADB and device manager so my question really is....HELP??
How can i get just stock rom back onto it and then un-root and re-lock the bootloader?
Cheers in advanced.
Click to expand...
Click to collapse
you can find the model (for me it's vns-l31) on the back of the phone, just find the corresponding oeminfo file and the update file. flash the oeminfo file, put the update file from the rom zip in the dload folder and reboot using the 3 button combo till it says something about installing update
here's a list of update files: https://forum.xda-developers.com/hu...huawei-p9-lite-firmware-compilations-t3517124
and here you can find the oeminfo files, there's a google drive link under oemfiles, at least for the vns-l21, 22 and 31: https://forum.xda-developers.com/hu...nt/europe-vns-l31-toolkit-bootloader-t3432873
mjz2cool said:
you can find the model (for me it's vns-l31) on the back of the phone, just find the corresponding oeminfo file and the update file. flash the oeminfo file, put the update file from the rom zip in the dload folder and reboot using the 3 button combo till it says something about installing update[/url]
Click to expand...
Click to collapse
Hi, thanks for the reply.
All of those links refer to the P9 Lite - is this the same internals and software as the normal P9?
On the back of my phone it has - Model- EVA - L09 FCC ID: QISEVA-LO9 - IC: 6369A-EVALO9
I do not see how this relates to specific oeminfo file?
Lasatly, can you provide details on how to flash the oeminfo file to device and do you mean the following for the update:
So in rom sip there is a update.app file - extract this to sdcard in a new folder called dload? then install that via twrp?
Cheers
fabgav said:
Hi, thanks for the reply.
All of those links refer to the P9 Lite - is this the same internals and software as the normal P9?
On the back of my phone it has - Model- EVA - L09 FCC ID: QISEVA-LO9 - IC: 6369A-EVALO9
I do not see how this relates to specific oeminfo file?
Lasatly, can you provide details on how to flash the oeminfo file to device and do you mean the following for the update:
So in rom sip there is a update.app file - extract this to sdcard in a new folder called dload? then install that via twrp?
Cheers
Click to expand...
Click to collapse
first of all, no, p9 is a different phone, but you posted on the p9 lite forum. i'd suggest posting this question on the p9 forum.
i don't know exactly how it works for the p9, but it shouldn't be much different.
for the rom zip: inside that zip there's an update.app file, that file should indeed be put in a new folder called dload, but it won't be installed through twrp.
on the p9 lite it works like this: you flash the oemfile through twrp, and after that push and hold both volume buttons and the powerbutton till the phone reboots and shows an update progress screen, then you can release the buttons. now the update file will be installed. but then again, i don't know the procedure for the p9 so be sure to post your question on the correct forum.
edit: i've taken a look on that link to the stock rom you tried installing, it's a zip file that contains the dload folder, just put that folder on the root of your sdcard. do make sure it's the correct version.
you will have to flash the stock recovery for your phone however, and if the p9 works the same way as the p9 lite you should find an oeminfo file and flash that with twrp.
So sorry, I didn't realise I was in the lite forum!
I'll ask a mod to move, sorry and thanks for you help.
fabgav said:
So sorry, I didn't realise I was in the lite forum!
I'll ask a mod to move, sorry and thanks for you help.
Click to expand...
Click to collapse
here's a link to the oeminfo for eva -l9: https://forum.xda-developers.com/p9/development/c432-oeminfo-flash-twrp-t3384903 i think that one should be flashed in twrp, and after that you can use the 3 button combo
no problem at all
fabgav said:
Hi, thanks for the reply.
All of those links refer to the P9 Lite - is this the same internals and software as the normal P9?
On the back of my phone it has - Model- EVA - L09 FCC ID: QISEVA-LO9 - IC: 6369A-EVALO9
I do not see how this relates to specific oeminfo file?
Lasatly, can you provide details on how to flash the oeminfo file to device and do you mean the following for the update:
So in rom sip there is a update.app file - extract this to sdcard in a new folder called dload? then install that via twrp?
Cheers
Click to expand...
Click to collapse
Hello
Here it is p9 lite.
Section p9 is here. https://forum.xda-developers.com/p9
I think you are looking for this.
https://forum.xda-developers.com/p9/development/c432-oeminfo-flash-twrp-t3384903
Yes the steps are.
Bootloader
Twrp
Flash Cxxxoeminfo
DLOAD Bxxx
SOLVED
First post updated with fix.
Thanks for all the help here on XDA
deleted by user
Any other place i can download the "dload" file beisides mega...please any help...
Yureka 2 :NO OS installed .Do you want to reboot ? Clicked reboot.Mobile hangs
Hi,
I tried to install Lineage OS 15.1 custom ROM using TWRP recovery in my Yureka 2 YU5551. I wiped out the data before flashing. During flashing I faced Error 7 and unable to install custom ROM.Twrp asked this- NO OS installed. Do you want to reboot? I Clicked reboot and my mobile not even booted properly. Still hangs. I tried to open recovery mode using the power button and volume up and volume down button. I am unable to go to recovery mode. When I connect my mobile to my laptop its not recognizing as the phone is not restarting.
Can someone plz help me how to install an OS and start my phone. Thanks in advance.
Thanks
Thinagharraj
Hello sir, please notice me. Can I possibly get another link to get the stock.img because the link that you gave was already not available. Hoping for your response. Thanks
I have sticker in recovery no OS installed + no backup + locked bootloader
What can I do
----------------------/----------------------
Any one please help me
I want to flash my phone with stock firmware, but I cannot find it anywhere.
I am looking for PRA-LX1C738B123.
I own Huawei p8 lite 2017
I wiped my system because I wanted to install other rom, it didn't work so I want to go back to the original.
Unfortunately I wasn't smart enough to do a backup before so I am stuck atm. The bootloader is unlocked and flashing works, I can boot into huawei eRecovery and TWRP. (eRecovery gives the getting package info failed error) I have tried the dload method with other app files, it fails at 5% every time tho.
I tried using Huawei Update Extractor and Firmware Finder but I cannot find the exact firmware.
Could someone help me with installing my firmware? Oh and I am kinda new and it would be nice to get some guides,
Thanks.
I have the same problem but with a different firmware.. now only thing i can do is use dc-phoenix paid software (15$ for 72h of use). I will try that tomorrow as i also can't find exact same firmware it was on my phone.
MobileTechArena said:
I have the same problem but with a different firmware. now only thing i can do is usedc-phoenix paid software (15$ for 72h of use). I will try that tomorrow as i also can't find exact same firmware it was on my phone.
Click to expand...
Click to collapse
Thanks for reply. I will take that into consideration, but from what I see you were looking for PRA-LX1C432B106 and they indeed have the c432 roms there, however they don't seem to have the ones that I have been looking for. They have a list of firmwares online. Anyway good luck.
barnabaXXX said:
Thanks for reply. I will take that into consideration, but from what I see you were looking for PRA-LX1C432B106 and they indeed have the c432 roms there, however they don't seem to have the ones that I have been looking for. They have a list of firmwares online. Anyway good luck.
Click to expand...
Click to collapse
Yes, but any PRA-LX1C432 i tried doesn't work for me, flashing by fastboot. I believe any PRA-LX1 should work on this phone, but i will need to use that dc phoenix software to flash it.
MobileTechArena said:
Yes, but any PRA-LX1C432 i tried doesn't work for me, flashing by fastboot. I believe any PRA-LX1 should work on this phone, but i will need to use that dc phoenix software to flash it.
Click to expand...
Click to collapse
Thanks for making it clear. Please tell me if it worked or not. Thanks.
barnabaXXX said:
I want to flash my phone with stock firmware, but I cannot find it anywhere.
I am looking for PRA-LX1C738B123.
I own Huawei p8 lite 2017
I wiped my system because I wanted to install other rom, it didn't work so I want to go back to the original.
Unfortunately I wasn't smart enough to do a backup before so I am stuck atm. The bootloader is unlocked and flashing works, I can boot into huawei eRecovery and TWRP. (eRecovery gives the getting package info failed error) I have tried the dload method with other app files, it fails at 5% every time tho.
I tried using Huawei Update Extractor and Firmware Finder but I cannot find the exact firmware.
Could someone help me with installing my firmware? Oh and I am kinda new and it would be nice to get some guides,
Thanks.
Click to expand...
Click to collapse
Hello ! I think I could be of some help since I encountered the exact same problem !
edit: well I just realized I can't find your ROM with firmware finder either, sorry for the failed attempt
In your case I'd try with each firmware until one would work or a I tried them all.
You need some utilities first :
- Firmware Finder
https://forum.xda-developers.com/tools/general/huawei-firmware-finder-team-mt-t3469146
It will allow you to find the stock ROM that fits your model
-Huawei UPDATE extractor
https://forum.xda-developers.com/showthread.php?t=2433454
It will allow you to extract the .img files from the firmware previously downloaded.
-fastboot and adb
https://forum.xda-developers.com/showthread.php?t=2317790
The programs that will allow you to flash the .img files.
Now:
1. Find your ROM using firmware finder (the model is usually on the box you received the android in).
2.Extract the necessary .img files : system.img, boot.img, recovery.img.
3.Reboot into the bootloader, connect your device to your computer, open a cmd exe (powershell in my case) by holding shift+right click on the folder containing the .img files and flash each .img file, e.g. for the system file:
"fastboot flash system system.img"
4.then use "fastboot reboot" and after that shutdown your device
(in my case even after flashing the .img files I was greeted by a blank screen, so I shutdown my device holding the power button).
5. Boot into recovery holding vol up + power buttons (be sure to disconnect your device before shutting down and powering it up again) and choose factory reset.
It should then reboot into ROM installation procedure where you will have to follow the same steps as when you booted your device for the first time.
edit: formatting
Also, as far as my limited knowledge goes, there is no custom ROM officially supported for our dear device.
JStrel said:
Hello ! I think I could be of some help since I encountered the exact same problem !
edit: well I just realized I can't find your ROM with firmware finder either, sorry for the failed attempt
In your case I'd try with each firmware until one would work or a I tried them all.
You need some utilities first :
- Firmware Finder
https://forum.xda-developers.com/tools/general/huawei-firmware-finder-team-mt-t3469146
It will allow you to find the stock ROM that fits your model
-Huawei UPDATE extractor
https://forum.xda-developers.com/showthread.php?t=2433454
It will allow you to extract the .img files from the firmware previously downloaded.
-fastboot and adb
https://forum.xda-developers.com/showthread.php?t=2317790
The programs that will allow you to flash the .img files.
Now:
1. Find your ROM using firmware finder (the model is usually on the box you received the android in).
2.Extract the necessary .img files : system.img, boot.img, recovery.img.
3.Reboot into the bootloader, connect your device to your computer, open a cmd exe (powershell in my case) by holding shift+right click on the folder containing the .img files and flash each .img file, e.g. for the system file:
"fastboot flash system system.img"
4.then use "fastboot reboot" and after that shutdown your device
(in my case even after flashing the .img files I was greeted by a blank screen, so I shutdown my device holding the power button).
5. Boot into recovery holding vol up + power buttons (be sure to disconnect your device before shutting down and powering it up again) and choose factory reset.
It should then reboot into ROM installation procedure where you will have to follow the same steps as when you booted your device for the first time.
edit: formatting
Also, as far as my limited knowledge goes, there is no custom ROM officially supported for our dear device.
Click to expand...
Click to collapse
Thanks for help! I tried but i dont' have factory reset option. All I have is Shutdown, reboot and "Download leastest version and recovery" and after I click that all it does is wants internet connection. I logged in to my wifi but it didn't work and I ended up with "getting package info failed screen".
barnabaXXX said:
Thanks for help! I tried but i dont' have factory reset option. All I have is Shutdown, reboot and "Download leastest version and recovery" and after I click that all it does is wants internet connection. I logged in to my wifi but it didn't work and I ended up with "getting package info failed screen".
Click to expand...
Click to collapse
Yes I had the exact same problem, but once I did what I described, by rebooting into recovery (without twrp), I finally had the option to restore factory settings.
I believe the issue is in the fact you don't have access to the stock ROM for your model.
JStrel said:
Yes I had the exact same problem, but once I did what I described, by rebooting into recovery (without twrp), I finally had the option to restore factory settings.
I believe the issue is in the fact you don't have access to the stock ROM for your model.
Click to expand...
Click to collapse
I got rom that allows me to do a factory reset, it's stuck at 99% for like 2 hours now, is it normal? If not what should I do?
barnabaXXX said:
I got rom that allows me to do a factory reset, it's stuck at 99% for like 2 hours now, is it normal? If not what should I do?
Click to expand...
Click to collapse
Unfortunately I can't help you further than what I already posted.
But keep updating in case someone more knowledgeable peeks in.
similar problem....I was fairly good but play store was stuck in pending download....
I did a wipe in TWRP, and ended with a black screen...
I can boot to eRecovery, but it fails.and also to TWRP.
when attached to PC it keeps being seen and unseen as if its stuck in a power on cycle
Any help would be greatly appreciated.
Already Tested
JStrel said:
Hello ! I think I could be of some help since I encountered the exact same problem !
edit: well I just realized I can't find your ROM with firmware finder either, sorry for the failed attempt
In your case I'd try with each firmware until one would work or a I tried them all.
You need some utilities first :
- Firmware Finder
https://forum.xda-developers.com/tools/general/huawei-firmware-finder-team-mt-t3469146
It will allow you to find the stock ROM that fits your model
-Huawei UPDATE extractor
https://forum.xda-developers.com/showthread.php?t=2433454
It will allow you to extract the .img files from the firmware previously downloaded.
-fastboot and adb
https://forum.xda-developers.com/showthread.php?t=2317790
The programs that will allow you to flash the .img files.
Now:
1. Find your ROM using firmware finder (the model is usually on the box you received the android in).
2.Extract the necessary .img files : system.img, boot.img, recovery.img.
3.Reboot into the bootloader, connect your device to your computer, open a cmd exe (powershell in my case) by holding shift+right click on the folder containing the .img files and flash each .img file, e.g. for the system file:
"fastboot flash system system.img"
4.then use "fastboot reboot" and after that shutdown your device
(in my case even after flashing the .img files I was greeted by a blank screen, so I shutdown my device holding the power button).
5. Boot into recovery holding vol up + power buttons (be sure to disconnect your device before shutting down and powering it up again) and choose factory reset.
It should then reboot into ROM installation procedure where you will have to follow the same steps as when you booted your device for the first time.
edit: formatting
Also, as far as my limited knowledge goes, there is no custom ROM officially supported for our dear device.
Click to expand...
Click to collapse
Hello did you already test ???
Here is the solution for every PRA-LX1: [http : // www . htcmania . com / showthread . php ? t=1326478] (sorry for the spaces, but I don't have enough posts written to post external links )
Unfortunately, it's from a spanish forum. I didn't found any problem to follow this tutorial, but maybe for someone it could be a little difficult.
Anyway, it works!
MobileTechArena said:
Yes, but any PRA-LX1C432 i tried doesn't work for me, flashing by fastboot. I believe any PRA-LX1 should work on this phone, but i will need to use that dc phoenix software to flash it.
Click to expand...
Click to collapse
Where did you find the C432 firmware? I can't succees to find it
Flashing to a completely empty phone via DC phoenix or manual via fastboot still didnt got my device started. Sometimes I end up in the eRecovery and sometimes its just stuck at boot.
I tried different version from the hicloud but none so far did the trick. Maybe someone can point me into the right direction so i can finally rescue this phone?
EDIT:
PRA-LX1C432
Sorry cant link to these files since i don't got 10 posts. Maybe PM ?
Copied the Mega TWRP backup (B100) to SD card
Flashed TWRP via fastboot
Disconnected the USB cable
Boot into TWRP
Restored TWRP backup
Restarted phone into fastboot
OEM unlocked it
Got booted into TWRP since no stock recovery there
Booted into fastboot again
flashed stock recovery
Android started to work!
Tried to update to B164 and failed
Reboot
Now it offered B110 and I tried to update to B110. Success.
Iocere said:
Flashing to a completely empty phone via DC phoenix or manual via fastboot still didnt got my device started. Sometimes I end up in the eRecovery and sometimes its just stuck at boot.
I tried different version from the hicloud but none so far did the trick. Maybe someone can point me into the right direction so i can finally rescue this phone?
EDIT:
PRA-LX1C432
Sorry cant link to these files since i don't got 10 posts. Maybe PM ?
Copied the Mega TWRP backup (B100) to SD card
Flashed TWRP via fastboot
Disconnected the USB cable
Boot into TWRP
Restored TWRP backup
Restarted phone into fastboot
OEM unlocked it
Got booted into TWRP since no stock recovery there
Booted into fastboot again
flashed stock recovery
Android started to work!
Tried to update to B164 and failed
Reboot
Now it offered B110 and I tried to update to B110. Success.
Click to expand...
Click to collapse
Yeah, that's the way! It worked for me too!
juanmemo said:
Yeah, that's the way! It worked for me too!
Click to expand...
Click to collapse
Also i noticed everytime a OTA fails you get the full version offered on next boot. So you should get a full B164 aswell after it failed
JStrel said:
Yes I had the exact same problem, but once I did what I described, by rebooting into recovery (without twrp), I finally had the option to restore factory settings.
I believe the issue is in the fact you don't have access to the stock ROM for your model.
Click to expand...
Click to collapse
how can you boot into recovery ? i can only boot into twrp or fastboot & rescue or if i plug the huawei to the pc erecovery ???
---------- Post added at 12:16 AM ---------- Previous post was at 12:13 AM ----------
i have an huawei pra-lx1 c530 it used to boot into pra-lx1c530b111 rooted and twrp but now it doens't boot anymore, i'd like to flash to c530b160 but i can't find the firmware images
tiagoggama said:
Hello did you already test ???
Click to expand...
Click to collapse
Thanks men
I CONFIRM IT WORK PERFECTLY
For the second part go to this link for more detail :
https://boycracked.com/2016/03/14/h...-unbrick-firmware-any-huawei-android-devices/
TWRP backup - H3223 Xa2 ultra - discovery 50.1.A.4.76
Should be boot, system, and vendor partitions as backed up by TWRP. The backup was performed after unlocking bootloader and booting twrp via fastboot, no changes to boot or system should have been made. I included md5sums generated on the phone on top of the sha2 performed by twrp. Trying to give back to the community, did my own work and I don't have any reason to add any malware. As straight as I could get it off the phone. I'm hoping this will help out someone that maybe gets themselves in a soft brick situation.
File size is 2.5G
https://drive.google.com/open?id=1v-DJym4rfmTxR40a2otH7ZgDz29teVZK
Drenyx said:
TWRP backup - H3223 Xa2 ultra - discovery 50.1.A.4.76
Should be boot, system, and vendor partitions as backed up by TWRP. The backup was performed after unlocking bootloader and booting twrp via fastboot, no changes to boot or system should have been made. I included md5sums generated on the phone on top of the sha2 performed by twrp. Trying to give back to the community, did my own work and I don't have any reason to add any malware. As straight as I could get it off the phone. I'm hoping this will help out someone that maybe gets themselves in a soft brick situation.
File size is 2.5G
https://drive.google.com/open?id=1v-DJym4rfmTxR40a2otH7ZgDz29teVZK
Click to expand...
Click to collapse
Hey I bricked a xperia za2 h3123 I been looking all over the internet for a rom and even tried using flashtool to flash a firmware but, apparently that doesn't work because there missing a file. I'm hoping I can get help somewhere.
Sponge420 said:
Hey I bricked a xperia za2 h3123 I been looking all over the internet for a rom and even tried using flashtool to flash a firmware but, apparently that doesn't work because there missing a file. I'm hoping I can get help somewhere.
Click to expand...
Click to collapse
- Download latest firmware with XperiFirm
- Go to the downloaded firmware folder
- Create a new folder titled: partition
- Move partition-xxxxxx.sin file to the newly created partition folder
- Download Newflasher v11+ and extract its files to the downloaded firmware folder
- Connect your XA2 (Ultra) in Flash Mode (volume down)
- Run Newflasher - double click newflasher.exe (say N twice when asked for) - and wait till flashing process finishes
Drenyx said:
TWRP backup - H3223 Xa2 ultra - discovery 50.1.A.4.76
Should be boot, system, and vendor partitions as backed up by TWRP. The backup was performed after unlocking bootloader and booting twrp via fastboot, no changes to boot or system should have been made. I included md5sums generated on the phone on top of the sha2 performed by twrp. Trying to give back to the community, did my own work and I don't have any reason to add any malware. As straight as I could get it off the phone. I'm hoping this will help out someone that maybe gets themselves in a soft brick situation.
File size is 2.5G
https://drive.google.com/open?id=1v-DJym4rfmTxR40a2otH7ZgDz29teVZK
Click to expand...
Click to collapse
How do I restore this to mine......bootloader unlocked and now stuck on Sony boot screen? Don't have TWRP installed but think I can. Any suggestions?
try XperiaFlash but download a rom trough Xperiafirm first.
Or use Emma.
Can the H3223 firmware be flashed on to the EDIT H3213? (both xa2 ultra) are the partitions different? (modem different?) (assume bootloader has been unlocked) Thanks
Hi, I think i've kinda bricked my honor 5C (nem-l51), and I really need help :
A few years ago I rooted my phone to make otg work.
It worked a little while, but then a system update came up, could not update because of the twrp, so I tried to unroot it (from supersu) to do the update, and the twrp stayed after the unroot.
I stayed with the phone like this, twrp installed and update pending (still trying to install the update from time to time) and then I had to use OTG again and tried to re-root my phone.
I tried to flash the supersu files I used the first time, but, even when the flashing worked, I couldn't see the supersu app on the phone, still unrooted.
Then I tried to change the twrp (via fastboot) and I realised that I couldn't : I get the "command not allowed" failure when the recovery should get written. I tried with numerous twrp versions, and stock recovery.
So my twrp right now is the twrp-3.1.1-0-venus "OpenKirin edition" one.
The phone says it's unlocked and the frp is locked, but I can't remember if it was already the case or not when I first rooted.
I unfortunately don't have anymore the bootloader unlock code that huawai gave me originally. I have no idea how to get it again, to try to re-lock/unlock the bootloader.
Back then when I first rooted my phone, I made a back up, so I tried to restore that back up. It failed, first with "cannot wipe the cust partition". Then I tried to restore without restoring the cust partition, and I got "extracttarfork() process ended with error 255" while the system was restoring.
After that, the phone wouldn't boot into android anymore. It would be stuck at the unlocked bootloader warning message and then reboot after a few minutes.
So, lastly, I tried to install the unofficial lineageOS port from here : https://forum.xda-developers.com/honor-5c/development/rom-lineageos-14-1-honor-5c-t3713911 with my twrp.
The installation went well, but the phone is stuck while first booting in lineageOS (I let it overnight, restarted it, re-installed it, tried with the first release, nothing).
TL;DR: My phone isn't booting and I can't flash any new recovery.
Please, help me to get my phone working again
Give me the
old build number on emui
Update build you received..
Twrp working?
Fastboot?
Erecovery?
I got access to erecovery, even if the "download latest version and recovery" doesn't work. (erecovery connects to wifi, and the first thing it tries to check/download fails)
I can boot into fastboot but can't flash recovery from there because of the command not allowed problem.
I can boot into twrp, but the back up I tried to restore and the lineageos rom I tried to install both failed, so maybe the twrp has a problem?
I'm sorry I'm not sure about the build number, I'm pretty sure I was on EMUI 5.0 and android 7.x, and I think I remember comparing current build number vs the update, and it was something like B350 or B351 for the current, and B355 or B375 for the update.
I've found this in my backup file 'recovery.log' ro.omni.version=6.0.1-20160703-nemo-HOMEMADE and ro.build.id=MOB30M . So, that mean that I had android 6.x when I did the backup, way back at the beginning.
I thought the update never got installed because each time the phone would reboot to complete installation, it would reboot into twrp. But I've still updated from android 6 to android 7 somehow ?
NEM-L51C432 or NEM-L51C10 ?
NEM-L51C432 and I'm sure of that ^^
Zhyrclew said:
NEM-L51C432 and I'm sure of that ^^
Click to expand...
Click to collapse
Flash this via twrp
http://update.hicloud.com:8180/TDS/...-L51_hw_eu/update_data_full_NEM-L51_hw_eu.zip
Once done, boot to twrp and flash this
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1581/g104/v82938/f1/full/update.zip
Reboot.
If you are unable to flash the 2nd link then just use the dload method to flash this. If you are not aware of dload method, link is given in my signature.
Note, this 2nd firmware will replace your twrp with stock recovery. You should boot to b350 version and it will be full stock. Reason for flashing data file first is it doesn't replace the recovery to stock but just flashes your data, settings, apps. And 2nd link is main full firmware which will replace your boot, recovery, vendor everything and should boot.
Good luck
I flashed the first one, no error.
The second one had multiple errors :
"[...]
write radio image...
32k crc checked failure
E:unknown command [errno]
update_huawai_pkg_from_ota_zip: update package from zip failed
Updater process ended with ERROR: 7
Error installing zip file '/sdcard/update.zip'
Updating partition details...
...done
"
So I tried the dload method, and the installation started and ended at 5% with this error :
"Software install failed!
Incompatibility with current version.
Please download the correct update package."
I guess it's because I couldn't tell you the exact build number, I'm sorry for not taking note of it.
If there is a way for me to get the build number despite the status of the phone, i'm ready to do it.
If not, I'm ready to try as many versions as it takes to find the good one.
PS: I've still access to the twrp, thank god ! That was my biggest fear, because I can't flash any recovery in the current state.
Zhyrclew said:
I flashed the first one, no error.
The second one had multiple errors :
"[...]
write radio image...
32k crc checked failure
E:unknown command [errno]
update_huawai_pkg_from_ota_zip: update package from zip failed
Updater process ended with ERROR: 7
Error installing zip file '/sdcard/update.zip'
Updating partition details...
...done
"
So I tried the dload method, and the installation started and ended at 5% with this error :
"Software install failed!
Incompatibility with current version.
Please download the correct update package."
I guess it's because I couldn't tell you the exact build number, I'm sorry for not taking note of it.
If there is a way for me to get the build number despite the status of the phone, i'm ready to do it.
If not, I'm ready to try as many versions as it takes to find the good one.
PS: I've still access to the twrp, thank god ! That was my biggest fear, because I can't flash any recovery in the current state.
Click to expand...
Click to collapse
You may try other higher versions like 360, 370 etc and see your luck. Twrp will be replaced only if the installation os successful for the main firmware. Its just a trial and error for you now but I am 99% sure you should be able to revive the phone via dload method
Thank you, it's reassuring. I will not give up until I test all the versions ^^
Could you help me a little bit to find other versions, please ? The only place I know where there is update packages for my phone is there : https://forum.xda-developers.com/ho...lota-upgrade-packages-models-nem-l51-t3473110 and there is only two versions.
Zhyrclew said:
Thank you, it's reassuring. I will not give up until I test all the versions ^^
Could you help me a little bit to find other versions, please ? The only place I know where there is update packages for my phone is there : https://forum.xda-developers.com/ho...lota-upgrade-packages-models-nem-l51-t3473110 and there is only two versions.
Click to expand...
Click to collapse
Firmware finder website
Wow, thank you, I downloaded the firmware finder software, it has everything.
Should I flash the firmware in two steps like you first made me, or should I just try with only the dload method with the fullOTA firmware ?
Zhyrclew said:
Wow, thank you, I downloaded the firmware finder software, it has everything.
Should I flash the firmware in two steps like you first made me, or should I just try with only the dload method with the fullOTA firmware ?
Click to expand...
Click to collapse
Check dload guide in my signature. You can follow that now. Good luck
I tried b355, b361, b375, b377, nothing changes, same error.
I noticed that I have something related to an update in my sd card AND internal storage->HwOUC->140783->( update.zip[1.32GB], update_data_full_public.zip[344MB], update_full_NEM-L51_hw_eu.zip[412MB] )
I don't know whether these files were there before I did all these attempted updates.
Could it be that my phone is not trying to install the files I put in sdcard->dload, because he finds these files in the internal memory first, and each time try to install these ?
Should I delete them, move them, unzip them in dload folder ?
Zhyrclew said:
I tried b355, b361, b375, b377, nothing changes, same error.
I noticed that I have something related to an update in my sd card AND internal storage->HwOUC->140783->( update.zip[1.32GB], update_data_full_public.zip[344MB], update_full_NEM-L51_hw_eu.zip[412MB] )
I don't know whether these files were there before I did all these attempted updates.
Could it be that my phone is not trying to install the files I put in sdcard->dload, because he finds these files in the internal memory first, and each time try to install these ?
Should I delete them, move them, unzip them in dload folder ?
Click to expand...
Click to collapse
Copy them on PC and then try dload of files you downloaded from Firmware finder website.
These are files your phone downloaded for OTA update but as you were on twrp, they never installed it amd stays there
I copied the updates my phone downloaded on PC and then deleted them both on internal storage and sd card.
Then I tried dload method with b355,b375&b377 from firmware finder, and also with the update.zip I found in the updates my phone downloaded.
Nothing worked, all of them got the error "Incompatibility with current version. Please download the correct update package."
Should I try even more firmware versions, or should I try something else ?
Btw, I noticed my phone, when connected to my PC, is labeled as huawei-P9-lite, and I don't think it was always like that, but it's probably just because the twrp-3.1.1-0-venus.img is originally for the P9 lite.
I came accross this thread, where somebody recommends to flash stuff from fastboot.
I have not tried it yet, I only tried to flash recovery from fastboot, and it is failing with the "command not allowed". But maybe I could try to flash some other things ? Any advice ?
For now, despite all my attempts to install stock OTA via dload method, the phone is still trying to boot into lineageOS, and failing.
I came across the "current" firmware version with a check with DC-unlocker : "NEM-L51C432B120"
So I downloaded full OTA firmware b120 on firmware finder software, and the dload method worked !
The installation went well, and after a few minutes of the first boot, I got into phone configuration.
I have one last problem, though : the phone configuration is looping.
There is only 4 languages to choose, so I have to choose english(US), then there is a weird list of countries, none in the EU, where I feel i have to choose united states, then after some steps I have to register to huawei ID thing.
If I try to skip it, it loops to the language selection.
If I try to log in to my original account, it says "device not supported for your location" and then loops to languages. (my original account is in french/France)
If I try to create a new account with new address mail, it works but then at the end says again that "device not supported for your location" and then loops to languages.
I tried with other countries it still loops.
The other languages seems to be Chinese and Japanese, but the configuration is looping too if I choose them.
I tried with/without sim, with/without wifi connected...
Dload the next firmware now and see if it works. Then set the phone
I downloaded and installed with dload method (by removing sd card and copying directly on it the files, because I don't know how to have access to the phone internal & external memory now) the next firmware (b130 version)
The phone booted, it launched a "system optimization" that was a few minutes long, and then the EMUI configuration poped up and looped through language selection, region(country), wifi connection (successful), terms and conditions, and WLAN+(switch between wlan and mobile data automatically).
I feel like the phone is working, the notification led is even blinking when I receive sms, but I have access to nothing because of this damned configuration.
Note: the connection to huawei ID isn't prompted again in the loop once I log in, from the original or the new account. In order to be prompted again to log in to the huawei ID, I have to go to erecovery and reset to factory the phone.