Can't boot anymore. - Huawei P30 Pro Questions & Answers

Hello there, I have two of the Huawei P30 Pro's Mobile Phones.
One is the Huawei P30 Pro New Edition with 256 GB and 8 GB Ram an the other is a Huawei P30 Pro with 128 GB and 8 GB Ram.
They doesn't boot into Android-System.
I only can boot into Recovery.
What can I do to get them work?
Please help me
Ciao, Jean-Pierre

I`ve read something about using a .bin file, but I don't know a thing more about it.
If you (I) can't boot into ... Bootloader/Recovery/System
it is nessesarily possible, to use a .bin file to make it happen to boot again.
Who can tell my how it's got to be, to make it ( minimum the Fastboot ) boot again?
Plaassseeee ;-} / ;-{

Related

Mate S bircked ?

Hi everyone,
I tried to install Marsmallow according to the XDA tutorial and my Mate S is now stucked on Huawei Logo when it boots.
I tried to put another Firmware on my SD in order to downgrade the phone but it did not work. I tried to wipe the data etc with the reset functionality it didn't work neither. Finally I tried to install TWRP or another recovery file that I've extract but I still get the error message "FAILED -(remote: command not allowed)". I guess I should have root my phone before but now it's bricked I can do it
So I'm kind of stucked on this (and a lot disapointed), if anyone has an idea it would be great.
PS : I can't even turn my Mate off now, it always displays Huawei logo and boot until it has no more battery !
Thanks for reading me.
i can tell you a long story from Huawei Mate S but i make it fast.
I flash realy all what i can found for a long Time but Mate S is a big Problem, biggest Problem is when you have a brandet Phone. First i have a Mate S with Provider Branding, that is realy bricked with update to Marshmallow but huawei have change my phone (6 Mounth they do that) and they have give me a brandet free phone and with that i dont have problems with update or brick.
When you now have a Brandet phone, talk with huawei that they change it (24 hours)
When you have a brandet free phone you have a chance that you can debrick it.
Please tell what you have make and what you have for a phone and what for FW you have installed. More input please
Only way what you can do is you download from huawei rollback . Its only for China but it works. When it start then and you update your phone again it will brick for ever !!

Help!!!! Mate 20 Pro (LYA-AL00) Chinese Version Stuck after dload to android 10

I considered myself to be noob here . It's my fault not to did a lot of research as possible before I proceed my upgrade since I wanted my Huawei Mate 20 Pro (LYA-AL00) (chinese version with no finger print) to run Android 10 instead of 9 (Which I didn't know what version I was using but I believe it was the latest of Android 9 for Mate 20 Pro). What I did was following this guide >
https://ministryofsolutions.com/202...-emui10-android-10-stock-firmware-update.html
everything described in the above link seems legit so I immediately follow step by step and download the stock firmware almost 5 hours. After using OTA with dload I saw the screen install the firmware successfully. However, after few minute the phone boot up and it showed "your device has loaded a different operating system". In such case, I couldn't do anything with erecovery or even using the hstool here: https://forum.xda-developers.com/mate-20-pro/how-to/manual-upgrading-mate-20-pro-bl-locked-t3905924
by using the method above, i stuck at (install recovery or install system) where my phone screen show circle with 5% processing, then hi suite say failed recovery. In such case, I believed I might install the wrong firmware which isn't allow for my phone? If it is wrong why the phone allow to install the firmware via dload? If not compatible or wrong should not let user process the work.
Right now I stuck at (Your device is loaded a different operating system) and nothing I can do in erecovery including using wifi to update. Can anyone help? Thank you
Sorry for my bad english.
NEED HELP !!!! same problem on lya l09
i used hisuite to update my mate 20 pro LYA L09 to emui 10 ( the official way ) after the update was installed my phone was stuck in this black screen " your device has loaded a different operating software " . i tried using erecovery " get package info failed"
OTG DLoad package method, if works you will be fine. If not, try DC phoenix with a Dload package. Last time I experienced same thing. Then DC phoenix helps.

Prog Emmc Firehose.mbn for Mi 9t pro?

My phone is bricked. No fast boot, no safe boot, it is completely unresponsive.
After trying everything with the Mi Flash tool, and after wasting days and days of time,
I decided to try to go for the Qfil procedure and to do so I need the Prog Emmc Firehose.mbn for the snap dragon 855.
Could anybody help me by giving me a link to it?
I will post the procedure if I will solve the problem without taking the smartphone to a xiaomi center.
secrets001 said:
My phone is bricked. No fast boot, no safe boot, it is completely unresponsive.
After trying everything with the Mi Flash tool, and after wasting days and days of time,
I decided to try to go for the Qfil procedure and to do so I need the Prog Emmc Firehose.mbn for the snap dragon 855.
Could anybody help me by giving me a link to it?
I will post the procedure if I will solve the problem without taking the smartphone to a xiaomi center.
Click to expand...
Click to collapse
I've not yet heard of anyone ever fixing this phone using that method. Only solution I'm aware of is to try EDL flashing, which unfortunately means a service centre or finding someone with an authorised account.
secrets001 said:
My phone is bricked. No fast boot, no safe boot, it is completely unresponsive.
After trying everything with the Mi Flash tool, and after wasting days and days of time,
I decided to try to go for the Qfil procedure and to do so I need the Prog Emmc Firehose.mbn for the snap dragon 855.
Could anybody help me by giving me a link to it?
I will post the procedure if I will solve the problem without taking the smartphone to a xiaomi center.
Click to expand...
Click to collapse
Download Patched Firehose File (prog_emmc_firehose.mbn) for 600+ Android Devices
From this guide, you could download Patched Firehose File, also known as prog_emmc_firehose.mbn file for over 600+ Android devices for Xiaomi, etc.
www.droidwin.com
secrets001 said:
My phone is bricked. No fast boot, no safe boot, it is completely unresponsive.
After trying everything with the Mi Flash tool, and after wasting days and days of time,
I decided to try to go for the Qfil procedure and to do so I need the Prog Emmc Firehose.mbn for the snap dragon 855.
Could anybody help me by giving me a link to it?
I will post the procedure if I will solve the problem without taking the smartphone to a xiaomi center.
Click to expand...
Click to collapse
I'm afraid that for such a new SOC like 855, not yet available patched proc.
@kidd024 download no auth firehose for Redmi K20 Pro / Mi 9T Pro here:
https://romprovider.com/redmi-k20-pro-no-auth-firehose
do you know how i can get one of these pair the mu9t or k20 without being the pro version?

i need chinese ofp file for realme x2 pro china

please help me.i have realme x2 pro chinese rom and i was on realme ui 2.0 but i wanted to try a custom rom but the phone bricked while flashing custom recovery and now the phone does not boot and there is a message saying the current image (boot/recovery) have been destroyed‏ please i can not find the ofp file can any one help me​
asfai said:
please help me.i have realme x2 pro chinese rom and i was on realme ui 2.0 but i wanted to try a custom rom but the phone bricked while flashing custom recovery and now the phone does not boot and there is a message saying the current image (boot/recovery) have been destroyed‏ please i can not find the ofp file can any one help me​
Click to expand...
Click to collapse
Would this help
Download Realme X2 Pro RMX1931 Firmware Flash [OFP File]
www.firmware27.info
asfai said:
please help me.i have realme x2 pro chinese rom and i was on realme ui 2.0 but i wanted to try a custom rom but the phone bricked while flashing custom recovery and now the phone does not boot and there is a message saying the current image (boot/recovery) have been destroyed‏ please i can not find the ofp file can any one help me​
Click to expand...
Click to collapse
Friend I have the same problem as yours. I've tried everything else I can't relive my realme x2 pro china. Have you managed to revive your device?
Please I need help. My REALME X2 PRO CHINA VERSION STOPPED. I was on Android 10 and I upgraded to Android 11, so that's fine. Then I invented to give a Hard Reset on Android 11 out of nowhere the device stopped. The ERROR that shows is: The current image (boot / recovery) have been destroyed and can not boot. Please flash the correct image.
asfai said:
please help me.i have realme x2 pro chinese rom and i was on realme ui 2.0 but i wanted to try a custom rom but the phone bricked while flashing custom recovery and now the phone does not boot and there is a message saying the current image (boot/recovery) have been destroyed‏ please i can not find the ofp file can any one help me​
Click to expand...
Click to collapse
Any updates? did you find the file, or was your issue solved?
Marpeon said:
Friend I have the same problem as yours. I've tried everything else I can't relive my realme x2 pro china. Have you managed to revive your device?
Click to expand...
Click to collapse
Hey, did you figure out a solution?
Marpeon said:
Please I need help. My REALME X2 PRO CHINA VERSION STOPPED. I was on Android 10 and I upgraded to Android 11, so that's fine. Then I invented to give a Hard Reset on Android 11 out of nowhere the device stopped. The ERROR that shows is: The current image (boot / recovery) have been destroyed and can not boot. Please flash the correct image.
Click to expand...
Click to collapse
Any Updates? did you find a solution?
dear realme, please give us a solution, i have realme x2 pro global version but now its completely briked after realme ui 2.0 update. my recovery is completely white and no custom recovery seem to work. please help, i have no phone
iktiarn said:
dear realme, please give us a solution, i have realme x2 pro global version but now its completely briked after realme ui 2.0 update. my recovery is completely white and no custom recovery seem to work. please help, i have no phone
Click to expand...
Click to collapse
This happen to me and the solution for me after trying everything was to contact gsm mafia.
I had to pay in advance, and give them access to my laptop. Things that I would never have done in the past .
Realme X2 Pro RMX1931 Flash File (Stock Rom) GSMMAFIA
RMX1931EX flash file . this file can fix hang on logo and bricked situation of the phone. you can also remove all screen lock of the phone by flashing file
www.gsmmafia.com

Please help with recovering data from soft bricked Xiaomi Redmi Note 9 Merlin

Hi. On the start i want to apologize for any chaotic description i may give, or mistakes/unclear explanation since for first - english is not my native language and for second i'm terribly tired and depressed as a result of 2 days searching for informations how to solve my problem. Lets get to case.
Patient:
Xiaomi Redmi Note 9 (merlin), complete model "M2003J15SG", it have unlocked bootloader, no root, no custom recovery, probably no granted permisions for adb.
I'm not sure which version of rom it have at the moment i remember only that it was global.
Case:
Few days ago Xiaomi displayed notification about possible upgrade to MIUI 13. That was not the first update that i installed directly just by accepting it, so i decided to give it a go.
After that, my phone went to infinite bootloop (there is a mi logo with "powered by android" that stays there for minute, and then it reboots and situation repeats itself).
Recovery is not working (or i do it wrong -> power+ vol up, maybe it's damaged after this update) i cant get into fastboot either (power + vol down).
However when i connect to pc and press power + vol down windows makes sound of pluging and unpluging device few times (probably its a mode that i can flash it with new rom with flash tool).
If i can (probably) flash whole ROM then what is a problem? :
Main problem is, that i have there very important data there, especially text messages and there is no way i want to lose it.
To give you small tip why it is so important to me i will explain it with a bit of offtopic:
Inside of sms google app i have messages that contains crucial informations, like my ex employer incriminating messages, codes that gain me acess to meds in pharmacy, adresses and so on - i just can't lose it because at the end i could have a pretty big trouble about it, including my ex employer tring to make me a scapegoat for his own decisions in front of a law. End of offtop.
Expectations:
I've so far read that if i will have custom recovery, i would be able to make a backup of data inside of Redmi.
Then i would try to flash entire ROM, but important is that i will have that data backed up.
Since i'm not a master class when it comes to adb, flashing, and so on - i would like to ask you for help.
I mean i know how to flash rom or, unlock bootloader, or root - but i lack knowledge about subjects that matters in this particullar situation,
especially i dont know can i flash only recovery with flash tools, and if so - will it erase internal data,
where to get already prepared scatter and recovery, how to do it - i need extremaly step by step help, so i could understand it and do it.
Is it possible to flash only custom recovery with flashtools without erasing data, and if so - how?
Is it possible to flash ROM without data being erased - if so, how?
Is there any tool i should look into, or maybe when it cames to switching to recovery/fastboot i'm doing something wrong?
Is there ANY and i mean ANY way to or fix bootloop, or at least get custom recovery without permanently losing important data?
Warning:
If you need any more informations - let me know and i will post it.
I've searched with google for 2 days right now and i have no straight answer for a questions.
If i posted question that already was asked - i apologize, truly i am not able to be on highest level of my perception and thats why i would like you to explain things to me like for a 8 years old.
I would appreciate any form of help with a subject. Thank you in advance for a time, knowledge and answers.
Wrong section.
Merlin is Xiaomi Redmi Note 9 and not Xiaomi Redmi Note 9 Pro.
Try here:
Redmi Note 9S / Note 9 Pro (Indian Model)
The Redmi Note 9S / Note 9 Pro (Indian Model) is a 6.67" phone with a 1080x2400p resolution display. The Qualcomm SM7125 Snapdragon 720G chipset is paired with 4/6GB of RAM and 64/128GB of storage. The main camera is 48+8+5+2MP and the selfie camera is 16MP. The battery has a 5020mAh capacity.
forum.xda-developers.com
VD171 said:
Wrong section.
Merlin is Xiaomi Redmi Note 9 and not Xiaomi Redmi Note 9 Pro.
Try here:
Redmi Note 9S / Note 9 Pro (Indian Model)
The Redmi Note 9S / Note 9 Pro (Indian Model) is a 6.67" phone with a 1080x2400p resolution display. The Qualcomm SM7125 Snapdragon 720G chipset is paired with 4/6GB of RAM and 64/128GB of storage. The main camera is 48+8+5+2MP and the selfie camera is 16MP. The battery has a 5020mAh capacity.
forum.xda-developers.com
Click to expand...
Click to collapse
Edited - you are right, that's not "Pro", but merlin still. And for sure not indian.
I've updated to MIUI 13 too and I lost all my data too.
I've inspected the problem.
After upgrade to MIUI 13, it modifies the encryption keys for decrypting contents.
So, if you didn't backup these keys, there is no possibility for recovering.
VD171 said:
I've updated to MIUI 13 too and I lost all my data too.
I've inspected the problem.
After upgrade to MIUI 13, it modifies the encryption keys for decrypting contents.
So, if you didn't backup these keys, there is no possibility for recovering.
Click to expand...
Click to collapse
I think that i should at least try to access data since i've seen a lot of weird stuff that shouldnt work in some way, but did.
Would you be kind enough to tell me - is there a way to flash TWRP with flash tool in download mode without touching data partitions?
And if it is, can you explain to me how to do it or give me some link particullary to files for my model (recovery and scatter)?
This MIUI 13 update really surprised me in a bad way, it's even worse to hear i'm not the only one with that problem
VD171 said:
I've updated to MIUI 13 too and I lost all my data too.
I've inspected the problem.
After upgrade to MIUI 13, it modifies the encryption keys for decrypting contents.
So, if you didn't backup these keys, there is no possibility for recovering.
Click to expand...
Click to collapse
Can you please guide me specifically?
try reflashing boot and recovery in fastboot.

Categories

Resources