Related
hi so i bought OP3T to have nethunter on it. but now i am totally confused how to install nethunter on my device properly, there needs to be an updated guide about it that i couldn't find in xda forums.
first about my phone:
it's OP3T on nougat, OOS 4.1.7 . currently i'm using latest official LOS 14.1 rom.
with Encryption enabled, on LOS stock kernel.
What i tried is this thread,
https://forum.xda-developers.com/oneplus-3t/development/kernel-kali-nethunter-oneplus-3t-t3507816
and i downloaded
nethunter-generic-arm64-kalifs-full-rolling-3.20-20170903-2143.zip
kernel-nethunter-oneplus3T-cm-nougat-3.20-20170903-2143.zip
by following above guide i went into TWRP recovery i flashed kernel which also flashed supersu with it, and then flashed kali nethunter,
everything went perfect, no problems, but i can't use kali nethunter, its terminal does not open,
on above thread @uaiclout pointed to following thread to use that build,
https://forum.xda-developers.com/oneplus-3/development/kernel-boeffla-kernel-linaro-uber-t3455888/
but when i went to that thread that is a kernel and not a rom, and not a nethunter build,
i don't understand what do i have to do to make NetHunter work properly? and there is no specific thread / guide on it. i don't wanna brick my phone so taking my steps carefully, as i am new in OP3T and coming from Samsung devices there are some new strange abbreviations being used in OP3T forums which i don't know what they mean.
like bootloader thing is not being mentioned in OP3T forums but firmwares (i am confused what they are?) and like kernels are using some strange terms,
so it will be very thankfull for someone who uses NetHunter on OP3T successfully to create a guide or atleast tell others how you made it work on nougat LOS or other non-stock based custom roms? and kernels + wifi devices to be detected on phone like TL-WN722N ?
thanks in advance.
Hello Mate,
Welcome to the OnePlus fam!
So as I've understood, your Kali Terminal is not working. I've had the exact issue, and I fixed it by reinstalling the Terminal apk ;(https://github.com/offensive-securi...thunter-installer/update/data/app/Term-nh.apk)
If you're getting a chroot error, uninstall the chroot, and re-download it from Chroot Manager.
To correct your misunderstandings, Firmware is the base software of the phone, which has Modem information, etc etc. Firmware is released by OnePlus, and it has minor changes and tweaks with every new version. Developers can choose any Firmware version to build their ROM over it. So if you're installing a new ROM, make sure to check the Firmware version. If your current firmware version is below the required version for the ROM, TWRP will give you a "Error=7" when flashing the ROM.
Kali Nethunter is a Kernel for OP3/3T, not a ROM. Make sure you've flashed the correct Zip file, as there are many versions, one for OOS stock, another for LOS, and so on and on.
Also for using Kali for Wi-Fi related purposes, I must warn you that it is not legal, but if you must, then there is a specific Wi-Fi adapter to be used with the 3/3T. I will update you on what the exact model is, and it is quite inexpensive on eBay.
I advise you to use Kali on OOS, rather than LOS, as it is more stable on OOS.
Cheers!
thes3usa said:
Hello Mate,
Welcome to the OnePlus fam!
So as I've understood, your Kali Terminal is not working. I've had the exact issue, and I fixed it by reinstalling the Terminal apk ;(https://github.com/offensive-securi...thunter-installer/update/data/app/Term-nh.apk)
If you're getting a chroot error, uninstall the chroot, and re-download it from Chroot Manager.
To correct your misunderstandings, Firmware is the base software of the phone, which has Modem information, etc etc. Firmware is released by OnePlus, and it has minor changes and tweaks with every new version. Developers can choose any Firmware version to build their ROM over it. So if you're installing a new ROM, make sure to check the Firmware version. If your current firmware version is below the required version for the ROM, TWRP will give you a "Error=7" when flashing the ROM.
Kali Nethunter is a Kernel for OP3/3T, not a ROM. Make sure you've flashed the correct Zip file, as there are many versions, one for OOS stock, another for LOS, and so on and on.
Also for using Kali for Wi-Fi related purposes, I must warn you that it is not legal, but if you must, then there is a specific Wi-Fi adapter to be used with the 3/3T. I will update you on what the exact model is, and it is quite inexpensive on eBay.
I advise you to use Kali on OOS, rather than LOS, as it is more stable on OOS.
Cheers!
Click to expand...
Click to collapse
now i am on latest PA official rom, i'm gonna try again. i like non-stock based roms because they allow device encryption with root (which stock roms don't allow) and i always keep my device encrypted as a security and ethical hacking student . i try to secure my devices from every new hack i learn. but i heard when you install NetHunter on Android, its security is compromised already, anyways,
as i mentioned the zips i downloaded from NetHunter builds, do you see any wrong zip? i downloaded kernel for CM based roms and also generic NetHunter,
which exactly Rom+Kernel combinations you have if you are using NetHunter? my device was on OOS 4.1.7 before i installed LineageOS 14.1 official on it. so suggest me the better OOS? and i will have to download anyway coz i lost my original backup of stock OOS 4.1.7 .
about wifi devices, i have 3 devices.
1. TP-LINK TL-WN722N
2. ALFA AWUS036H
3. ALFA AWUS036NH
none of them was detected by NetHunter app info screen, i heard on kali nethunter thread that TP Link TL-WN722N works, but it was not detected. but i can buy new device if needed, thats not a big issue, though it would be better if i can make one of above device to work with it. and there is a discussion on it that i will check if my NetHunter works properly first.
about the firmwares, i still don't get it, correct me if i'm wrong,
let say my phone was on OOS 4.1.7 when i bought it, then i rooted and installed TWRP on it, then i installed LineageOS 14.1 on it. so technically i am still on firmware 4.1.7 ? is that what you mean?
so if i want to install CM 13 on my device i will have to check what firmware is CM 13 build upon and flash that firmware before i flash CM 13 ? is that right?
so there is no trouble of bootloaders in OP3T as it was in samsung ? like in note 5 i upgraded to nougat and then i wanted to go back to lollypop but i couldn't because newer bootloader didn't allow me to go back, and i had to do some exercise to downgrade bootloader to lollypop before i could install any lollypop rom. so in OP3T firmware is to be flashed before installing certain roms is same like bootloaders was in samsung?
is it safe always to go back and forth in firmware flashings? if i wanna install lollypop rom i just flash that firmware which that rom is built upon and i am good to go? and then if i want to come back to nougat rom i just flash specific firmware and i'm good to go? (i know i am totally confused in this system, but i think i got it right now?). please confirm if all i said about firmwares is right or wrong so i can understand :fingers-crossed:
thanks
It sounds like the issue is that you are using PA. Their source is usually not CM/LOS based. I don't know about the newest versions though or if NetHunter has a PA compatible version.
Sent from my OnePlus 3T using XDA Labs
MrMeeseeks said:
It sounds like the issue is that you are using PA. Their source is usually not CM/LOS based. I don't know about the newest versions though or if NetHunter has a PA compatible version.
Sent from my OnePlus 3T using XDA Labs
Click to expand...
Click to collapse
no no, i am now on PA, but i tried NetHunter in LOS official 14.1
LineageOS for microG (14.1) for Xiaomi Mi 5s (capricorn)
aka LineageOS bundled with microG
Official ROM built by LineageOS for microG team (Simon94). Updates multiple times a week.
Simon94 said:
Android experience relies heavily on Google's Play Services. The microG project creates an alternative to installing Gapps, which install and execute closed-source blobs on our phones. MicroG however requires a patch called "signature spoofing", which allows microG's apps to spoof themselves as Google Apps. LineageOS currently does not include the patch due to different opinions among the developers. (further information can be found here)
This makes microG installation difficult on LineageOS and other ROMs. Our ROM is a fork of LineageOS with just the necessary changes to have microG built-in. We ship daily builds for 46 devices and we can add more as needed.
You can find us on https://lineage.microg.org
Click to expand...
Click to collapse
Project informations:
LineageOS for microG (new, official XDA thread by Simon94)
LineageOS bundled with microG (old & closed, official XDA thread by Simon94)
microG project official website
LineageOS for microG official website
XDA article about the project
microG GmsCore (official XDA thread by MaR-V-iN)
Working:
I think everything is working perfectly.
Bugs:
Same as in LineageOS 14.1, microG, F-Droid, etc.
Downloads:
Official download site
Sources:
microG
LineageOS for microG
LineageOS
Xiaomi vendor blobs
Disclaimer: this is just a discussion thread, the ROM is official, but I'm not the maintainer.
Old thread:
LineageOS for microG (14.1) for Xiaomi Mi 5s (capricorn)
aka LineageOS bundled with microG
Unofficial ROM built by iamnotstanley (me). Updates every Tuesday.
Project informations:
LineageOS bundled with microG (official XDA thread by Simon94)
microG project official website
LineageOS for microG official website
XDA article about the project
microG GmsCore (official XDA thread by MaR-V-iN)
Working:
I think everything is working perfectly.
Bugs:
Same as in LineageOS 14.1, microG, F-Droid, etc.
No OTA updates (fixed but no new build)
Currently the ROM is building with test keys, and not with my own private keys. (fixed but no new build)
Downloads:
lineage-14.1-20171105-microG-capricorn.zip (mirror)
lineage-14.1-20171105-microG-capricorn.zip.md5sum (mirror)
Sources:
microG
LineageOS for microG
LineageOS
Xiaomi vendor blobs
Build command
XDA:DevDB Information
LineageOS for microG (14.1), ROM for the Xiaomi Mi 5s
Contributors
iamnotstanley, Simon94, microG team, LineageOS team
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.x
ROM Firmware Required: MIUI 7.7.6 dev firmware (LOS14.1 requirement)
Based On: LineageOS 14.1
Version Information
Status: Nightly
Created 2017-11-06
Last Updated 2017-12-09
Great to see this with LOS.
I have been trying out MicroG on a few SIGPOOF compatible ROMs.
My only problem was when I tried microG that BKK Futar didn't worked with it, but otherwise it's great.
mesziman said:
Great to see this with LOS.
I have been trying out MicroG on a few SIGPOOF compatible ROMs.
My only problem was when I tried microG that BKK Futar didn't worked with it, but otherwise it's great.
Click to expand...
Click to collapse
For me, in this ROM the BKK futár is working great. I used it for ~5 minute, it crashed once, but I think it's usable.
(Downloaded the latest apk with Yalpstore).
iamnotstanley said:
For me, in this ROM the BKK futár is working great. I used it for ~5 minute, it crashed once, but I think it's usable.
(Downloaded the latest apk with Yalpstore).
Click to expand...
Click to collapse
Does it autocomplete the places correctly?
mesziman said:
Does it autocomplete the places correctly?
Click to expand...
Click to collapse
No. So it isnt working too great. xd I think it's an issue in the Maps API.
will there be a LOS15 version in the foreseeable future?
iamnotstanley said:
No. So it isnt working too great. xd I think it's an issue in the Maps API.
Click to expand...
Click to collapse
I got this from LineageOSMicroG Official Thread...
"All the requested devices will be built from tomorrow on. Furthermore this thread is obsolete, since we migrated to a new project.
--> https://forum.xda-developers.com/android/software/lineageos-microg-t3700997"
Will you still continue to build after official support?
jigs4wkiller said:
will there be a LOS15 version in the foreseeable future?
Click to expand...
Click to collapse
Well, maybe later. I dont think microG currently supports Oreo.
rhyme4u12 said:
I got this from LineageOSMicroG Official Thread...
"All the requested devices will be built from tomorrow on. Furthermore this thread is obsolete, since we migrated to a new project.
--> https://forum.xda-developers.com/android/software/lineageos-microg-t3700997"
Will you still continue to build after official support?
Click to expand...
Click to collapse
Oh, it was fast.
If they'll build for capricorn too, I'll stop building this rom. It is unnecessary to have two identical roms to the device.
iamnotstanley said:
Oh, it was fast.
If they'll build for capricorn too, I'll stop building this rom. It is unnecessary to have two identical roms to the device.
Click to expand...
Click to collapse
We'll know tomorrow, but either way... It was great you brought it live first, thanks
rhyme4u12 said:
We'll know tomorrow, but either way... It was great you brought it live first, thanks
Click to expand...
Click to collapse
No problem, it's a great project.
Just confirmed by Simon94, we're getting official build tomorrow. :good:
The first official build just landed on https://download.lineage.microg.org/capricorn/. I updated the OP, from now this is just a discussion thread for our device.
what's the difference between from official los +gapps
zjy2200656 said:
what's the difference between from official los +gapps
Click to expand...
Click to collapse
Bunch of alternative open source libraries to replace proprietary Google ones so apps that require them work, without the need to install Gapps.
At this point, several popular open-source applications already require some of Google’s proprietary libraries to be installed. Increasing demand in the free software community in addition to severe problems in Google’s proprietary software discovered by the Android modding community, have led to the development of a free software clone of Google’s proprietary core libraries and applications - the microG Project was born.
Click to expand...
Click to collapse
Restart-Loop with WiFi connected
Hi, my MI5S keeps restarting, as soon as it get's connected to WiFi. First I thought it was a problem of your build, as I just bought the phone and my first custom rom was lineageos for microG But it turned out, also the pure lineageOS builds have this problem, and also other users reported it: https://forum.xda-developers.com/showpost.php?p=74413252&postcount=2367
I successfully was able to flash an older version, which is working perfectly: lineage-14.1-20171023-nightly-capricorn-signed.zip
Sadly, lineage os for microG doesn't is old enough to have this version.
Is there any chance you could build this older version and publish it? I can't wait, till this issue is fixed, and would love to go with the microG version instead the classic one...
hb045 said:
Hi, my MI5S keeps restarting, as soon as it get's connected to WiFi. First I thought it was a problem of your build, as I just bought the phone and my first custom rom was lineageos for microG But it turned out, also the pure lineageOS builds have this problem, and also other users reported it: https://forum.xda-developers.com/showpost.php?p=74413252&postcount=2367
I successfully was able to flash an older version, which is working perfectly: lineage-14.1-20171023-nightly-capricorn-signed.zip
Sadly, lineage os for microG doesn't is old enough to have this version.
Is there any chance you could build this older version and publish it? I can't wait, till this issue is fixed, and would love to go with the microG version instead the classic one...
Click to expand...
Click to collapse
I got it running by deleting the following app QtiTetherService
hb045 said:
... your build, ...
Click to expand...
Click to collapse
My build? I dont built this ROM since 11-05, you should try the latest official build. (Currently the 11-16) Maybe that fixed your issue.
I only built 1 unofficial build, the builds on the lineage.microg.org are official builds, built by the LOS4mG build bot
hb045 said:
... Is there any chance you could build this older version and publish it? I can't wait, till this issue is fixed, and would love to go with the microG version instead the classic one...
Click to expand...
Click to collapse
Well, no. I don't know how to revert all of the repos to an older state by date.
Btw, if you dont have the latest firmware you should try to install it, and try again, maybe it'll fix your issue, but idk.
And you should report the issue (again) in the xda thread and/or the LOS JIRA.
questions
Hi, I'm waiting for my 72 hours unlock hold for Mi 5s.
My last phone was LG G3 w\ LOS for microG, why the release for d855 is about 300mb and capriconr is about 500mb?
So I'm thinking about getting a custom ROM for my Huawei Honor 7 Lite, and i came across LineageOS one from XDA, now it doesnt say for what Phone's model the OS's are, unlike the EliteROM, so it would be very helpful if someone told me for which exact model the Lineage OS is, because my phone's model is NEM-L21C432B351, and I also wanted to know if the ROM includes a custom kernel or not, since it talks about only supporting EliteKernel, also is the TWRP version 3.1.1-0 good enough to install Lineage OS, and does the OS support USB OTG? Oh and the Lineage OS im talking about is from this link: https://forum.xda-developers.com/honor-5c/development/rom-lineageos-14-1-honor-5c-t3713911
(I'm new to all this ROM development stuff, apologies if there's anything wrong with what I'm doing)
These are my personal LineageOS builds. They aren't much different from regular LOS, other than some added patches.
More details and sources over at: https://git.issizler.club/LineageOS/LineageOS-by-Admicos
Download: https://www.androidfilehost.com/?fid=11410963190603912814
What's working/not working: Should be same as official LineageOS
XDA:DevDB Information
Unofficial LineageOS builds by Admicos, ROM for the ZTE Axon 7
Contributors
admicos
Source Code: https://git.issizler.club/LineageOS
ROM OS Version: 8.x Oreo
Based On: LineageOS
Version Information
Status: Beta
Created 2019-01-04
Last Updated 2019-01-04
CHANGELOG
15.1-20190201 1d456849f4b154381071c9ebae87ccff
15.1-20190121 45f811aecd226524c3c68394f0781e10
15.1-20190115 e9c47b0062b822c118f918318289a7e4
LOS Repo Sync
15.1-20190104-2 37ff7fb6510d0d819e10e932d3e18f9d
Fixed WireGuard
15.1-20190104
Initial Release
Nice. The addition of sigspoofing and substratum service would make plain LOS usable for me. Straight LOS and themes were always iffy.
[emoji106]
ZTE Axon 7 A2017U, /e/ v0.1 ROM, microG (NoGapps), Multiboot, XDA Legacy
As nobody really posted here, I just wanted to say that this is working really well.
I had huge gps problems with the last 15.1 unofficial, but it works perfectly in this one and it has some very nice additions as well and is 100% stable for me even with xposed and magisk.
@admicos Thank you very much and I really hope that, if you have the time, you continue making these.
New build being uploaded right now, no changes other than a LOS repo sync.
The last couple test builds I made were somewhat iffy, but this one seems pretty well. (The recolored boot animation didn't make it in for some reason, but the rest are fine)
Everytime when i reboot the system to os or recovery,the recovery looks replaced and i cant mount data.
Not sure what caused it,i just flashed this on my non treble axon 7
Predatorhaze said:
Everytime when i reboot the system to os or recovery,the recovery looks replaced and i cant mount data.
Not sure what caused it,i just flashed this on my non treble axon 7
Click to expand...
Click to collapse
boy ter here rediscovering the wonders of encryption and dm-verity check
New build being uploaded, another regular LOS repo sync, should be done in about an hour
--
Predatorhaze said:
Everytime when i reboot the system to os or recovery,the recovery looks replaced and i cant mount data.
Not sure what caused it,i just flashed this on my non treble axon 7
Click to expand...
Click to collapse
I'm not sure why that's happening either. Can you replicate this on official LOS? If you can, I'd suggest you try asking on their thread, they might know more.
Good ROM for a while, why not update it? Is there a new kernel upgrade for the top post?
[armitage] said:
As nobody really posted here, I just wanted to say that this is working really well.
I had huge gps problems with the last 15.1 unofficial, but it works perfectly in this one and it has some very nice additions as well and is 100% stable for me even with xposed and magisk.
@admicos Thank you very much and I really hope that, if you have the time, you continue making these.
Click to expand...
Click to collapse
What version of Xposed are you using? I've always wanted to try this ROM, but thought there wasn't an official Xposed yet. The others I knew at the time were reportedly shady.
Sorry for the long wait (kinda forgot about this existing :/), and sorry for the bad news;
As I am planning to switch to another phone, I cannot continue making this anymore.
I might continue this as a GSI or something, but I really don't know if that will happen, as Android source is a big mess that I don't think I, and my (reasonably fast) CPU are prepared to handle. (Any pointers to dealing with this are greatly appreciated)
It was a fun two years lurking around.
(ps: The source link is completely borked (and all my sources are gone). I probably should stop trying to be fancy and use a public Git server like a normal person the next time)
If your build env is on Docker, I can easily stage a build server for you. It won't be fast, but you can leave it running all night long if you need, and free up your computer.
Also, if you're not using Docker, I can help you set it up, so anyone else can easily build by themselves if they choose to do so.
Can I upgrade the kernel?
[9.0/8.1] Updated LOS Kernel [Version 3.18.136]
@admicos THREAD CLOSED!
In the OP, the mandatory link tp source code provides a HTTP 404 error.
Please advise the moderators' team if you want the thread to be re-opened and to update the link.
I see a lot of gadgets (like the G7 plus bike that has the same hardware) with several Android 10-based Roms and it looks like our device has been forgotten. There is not even one in beta to installation?
There are no 10 ROMs (non GSI) available. In the telegram group there's work being done, but nothing has released. Be patient. Beckham doesn't have much support.
I came across a patched version of 3.3.1 twrp by "Jleeblanch" (and installed successfully) and also noticed an unofficial lineageOS 17 rom on the Android file host page for the z3 play. I have yet to try it though. Here is an install guide from cyanogenmods for it. https://www.cyanogenmods.org/moto-z3-play-lineageos-17/
so far?
gardensofgrief said:
I came across a patched version of 3.3.1 twrp by "Jleeblanch" (and installed successfully) and also noticed an unofficial lineageOS 17 rom on the Android file host page for the z3 play. I have yet to try it though. Here is an install guide from cyanogenmods for it.
Click to expand...
Click to collapse
So how is it working so far. I want to give it a shot, I am sad and tired of waiting for it officially.
Redman3000 said:
So how is it working so far. I want to give it a shot, I am sad and tired of waiting for it officially.
Click to expand...
Click to collapse
I found bugs in motomods and LiveDisplay.
Crashes on screen, it turning off but device is on.
Xavier2Bv said:
I found bugs in motomods and LiveDisplay.
Crashes on screen, it turning off but device is on.
Click to expand...
Click to collapse
Did you try the newest Lineage 17.1 that jleeblanch posted a few months ago? It works better than the one posted above. https://forum.xda-developers.com/showpost.php?p=83119095&postcount=54
NoMoreBackdoors said:
Did you try the newest Lineage 17.1 that jleeblanch posted a few months ago? It works better than the one posted above. https://forum.xda-developers.com/showpost.php?p=83119095&postcount=54
Click to expand...
Click to collapse
Thanks!
This ROM works better than Lineage 17.
I haven't have bugs, I installed it since yesterday and everything works well.