Related
I remember (but not for sure) a settings page that gave you the ability to test different sensors and what-not. the reason for my question is because when i make a call the proximity sensor doesnt work, and i wanna know is it because of the rom or anything software related, or is it the sensor itself, since i recently had repair done on the screen.
thanks.
Nobody knows? i got a 30-day warrenty, so if my proximity sensor really isnt working i need to know soon.
I've used an app previously that would display raw readouts from the various sensors in the device, including the proximity and ambient light sensors. Stand by while I try to find what app that was...
In the meantime, you can at least verify that half of the sensor is working by looking at the screen through a digital camera or other phone's camera. The proximity sensors works off of a flashing IR LED that you should be able to see through a digital imaging sensor. The sensor is located to the left and below the speaker.
Also, I believe the application I was using is called "Elixir", and is free on the Market.
Thanks man, great app. everything is working ok now.
Hi!
I am facing problems with the orientation sensors (accelerometer and/or gyroscope), because installing several applications to test them (or use games), it is clearly observable, that they are a bit off (with enough to be disturbing when required). For example, games or tests that simulate a ball, and my phone is laying on a horizontal table, the ball rolls quickly to the edge of screen. This happens as well with the built-in tests in the "service menu" of the phone, for accelerometer and gyroscope also.
Do you have any suggestions how could I calibrate these sensors globally (for every app)?
Thanks.
Info
vetko said:
Hi!
I am facing problems with the orientation sensors (accelerometer and/or gyroscope), because installing several applications to test them (or use games), it is clearly observable, that they are a bit off (with enough to be disturbing when required). For example, games or tests that simulate a ball, and my phone is laying on a horizontal table, the ball rolls quickly to the edge of screen. This happens as well with the built-in tests in the "service menu" of the phone, for accelerometer and gyroscope also.
Do you have any suggestions how could I calibrate these sensors globally (for every app)?
Thanks.
Click to expand...
Click to collapse
factory Reset ur phone and then use PC companion app to Repair Firmware...
this can wipe current data and install fresh firmware on ur device
:good:
Hi,
I have the same problem. Only the x axis of the accelerometer seems to be affected : it show a value around 1 instead of 0 while the phone is sitting flat. Y and Z display normal values.
All the software solutions I have tried have had no effect at all... It seems the built-in test reads raw data from the accelerometer. It is hard to imagine how this can be a hardware problem though...
Anyway, in my case I believe a software fix (x=x-1) would do the trick but I have no idea how to do such a thing ! Any help ?
@vekto : Have you solved the issue by any chance ?
Would anyone care to try the accelerometer tests and post their results ?
Typing *#*#7378423#*#* will get you on the service menu. The two significant tests are "accelerometer" and "gyroscope".
I'd post some screenshots myself but I'm not allowed yet...
I'm having the same problem now. It seems one axis is affected. Haven't found a way around so far. This is sad because it affects the images taken with Google Camera Sphere mode. The images are badly aligned together with glitches in between. My phone wasn't like this before.
Either a SW fault - might be able to calibrate with GPS Status & Toolbox app, for example - or a FW fault - and reflashing ROM might help (highly unlikely) - or HW fault - the sensor has moved on the board (which is a bad sign anyway, might be on the way to disconnecting itself).
I sent mine to Xperia Care and got it back with the accelerator fixed. Still unclear if it's a HW problem...
It came back with a white spot on the screen (near the power button) though... so I sent it back again
I'm also having issues with the gyroscope. Installed Bubble app to calibrate the gyro. It showed the gyro was of a couple of degrees. Unfortunately the bubble app calibration doesn't work in a game like Need for Speed. It's very difiicult to achieve good times in the game right now since I have to hold it tilted to the left to go straight ahead.
So if anyone has a fix or workaround... Please do post.
Same problem, Seems after factory reset whith wipe dalvik cache.
any solution?
02nd March 2017, my autorotate has completely stopped working, restart, safe-deposit and reset do not fix. Diagnostics show Gyroscope Light Sensor and accelerometer failed testing, 3 years of same issue, surely there must be a fix that works by now?? ( please note, " turning it off and on again " does not fix it )
Helps Please
I have the same issue. Since last week, gyro, accelerometer, light and proximity sensors stop working. I've tried reflashing stock ROM without success. I have not warranty (almost 3 years old), so I even try to disassemble , disconnect an reconnect every flex (I don't know exactly were the sensors are located on the board). After that I get almost 8 hours of fully functionally sensors and then, they stop working again, so I'm almost sure it's a hardware issue.
Same problem for 3 years
I'm just now getting around to doing something about this. As my power button stopped working I can't post requested screenshot without going to the pc. I have been shopping new (fall 2018) phones after having the Z3+ since release. In my research I'm finding the phone still is better than Samsung, LG, and the pixel3 for me because the 3.5mm phone jack is mandatory for me using my device with an i-rig midi requiring both that port and the USB at the same time. I'm going to do everything I can to keep using this phone till it falls to dust. It's one of 4 Sony I've bought since the day Z1 came out of t-mo. I look forward to testing solutions. :good:
Some time after my post, I bought a new jack/proximity sensor flex and replace it. This solved the issue, but weeks later, the bottom portion of the touch screen becomes unresponsive. May be I have done something wrong... may be programmed obsolescence...
Hi I'm facing a problem of my gyroscope I don't know which one is not working a gyroscope or accelerometer. My gyroscope is so delay when I play pubg mobile and I can't also calibrate my Gsensor it always says FAIL but I put in a perfect flat surface please please please help me with this problems
Hello, my Mi A2 seems to have a strange effect when focusing on the primary lens. I would just like to know if this is normal or not. It seems when on the low light lens the focus is even across the image but the primary lens it seems to wash from one side to the other.
Here is a video to illustrate.
Does anybody else's do this? Thanks!
I've been having the same issue for a while now! It's very annoying and I have no idea how to fix it! I've been using the low light lens and just taking pictures with that. I cannot tell if it is a hardware or software issue either. I'm going to install a custom rom soon, just haven't had time to do it, so hopefully that fixes the issue!
i think it's a software issue, because after capture everything is OK
GAvetisyan333 said:
i think it's a software issue, because after capture everything is OK
Click to expand...
Click to collapse
I still have issues after capture. If I'm capturing text the top half is unreadable in portrait because it's so blurry, and when I tap to focus on the top it doesn't help.
Same issues here
I have exactly the same issue... It seems like the extremes of the picture are better and the sides really blurry. For text is really bad, and also for pictures when you want the focus not being in the center. As you mention, touching the focus does not help.
I have no solution for now, thinking on sending it back...
Doubed HW issue
I'm sorry to say I feel it like a HW issue as I am facing the same issue with GCam in my MI A2.
i too have the same problame even after capture...
It's fixed on my phone now, unfortunately I had to get a new camera module. The issue is likely caused by a misaligned lens element, so the only option is to swap the camera module or warranty the phone. Mine works great now. Shouldn't have had to fix it but I guess these things happen I guess.
Nope586 said:
It's fixed on my phone now, unfortunately I had to get a new camera module. The issue is likely caused by a misaligned lens element, so the only option is to swap the camera module or warranty the phone. Mine works great now. Shouldn't have had to fix it but I guess these things happen I guess.
Click to expand...
Click to collapse
Can you guide us how to swap the camera module?
jayanath said:
Can you guide us how to swap the camera module?
Click to expand...
Click to collapse
It should be pretty straightforward, here's a teardown video: https://youtu.be/mo92gAwKv6s. That should walk you through getting the module out.
Nope586 said:
It's fixed on my phone now, unfortunately I had to get a new camera module. The issue is likely caused by a misaligned lens element, so the only option is to swap the camera module or warranty the phone. Mine works great now. Shouldn't have had to fix it but I guess these things happen I guess.
Click to expand...
Click to collapse
Can you send a link to the module you got? There's several between eBay and AliExpress I've seen, but am looking for a reliable one.
I have the same problem, I think it's began after update to pie 9, Is it possible? I try everything like clear cache, factory reset, hitting the camera. What is your solution ? Only change the camera with new ?
EmranBG said:
I have the same problem, I think it's began after update to pie 9, Is it possible? I try everything like clear cache, factory reset, hitting the camera. What is your solution ? Only change the camera with new ?
Click to expand...
Click to collapse
This issue was with Android 8.1 as well. I checked with 2 other devices but only my device has the issue :crying:
jayanath said:
This issue was with Android 8.1 as well. I checked with 2 other devices but only my device has the issue :crying:
Click to expand...
Click to collapse
Then we need change the camera module too I dont have problem in close objects, have only in far objects..
Same issue here... I wonder if flashing Miui would solve this problem..
EmranBG said:
Then we need change the camera module too I dont have problem in close objects, have only in far objects..
Click to expand...
Click to collapse
I noticed this the other day as well, when taking a picture up close, it focuses fine, but on far away objects it has this issue.
i just ckecked with both lenses but all working fine in my case
onericardo said:
Same issue here... I wonder if flashing Miui would solve this problem..
Click to expand...
Click to collapse
Don't think this would help as this seems like a HW issue affecting only some devices.
one6pa2 said:
It should be pretty straightforward, here's a teardown video: https://youtu.be/mo92gAwKv6s. That should walk you through getting the module out.
Can you send a link to the module you got? There's several between eBay and AliExpress I've seen, but am looking for a reliable one.
Click to expand...
Click to collapse
Sure, I got it from here: https://www.witrigs.com/oem-dual-rear-camera-replacement-for-xiaomi-mi-a2
I have the same insane problem
Low light camera mode is working fine
But the regular mode washes out at the top but it is clear at close objects
Can u give us any solution miui...
mia2 camera issue after pie update
my mia2 primary camera does not focus properly ,videos are totally blurred after the pie update,hope xiomi resolves the camera issue soon.I think this is software issue,if it would have been a HW issue,why would the camera hadbeen working perfectly on OREO?
I am not much interested in camera when i bought Mi A2, it works fine. but recently when i was taking picture, it was half side blur and i was not able to make focus on upper side of camera. i tried all modes but no use. I have Note 6 Pro and it's camera functions and focus properly.
in mi A2 I observed when in MANUAL mode i select Lens as LOW LIGHT, it works (but in manual mode only).
do any one has some solution or give reason to behave camera like this.
Same here
It was a February patch bug and it seems to persist in March patch... Xiaomi.
pushpendrak said:
I am not much interested in camera when i bought Mi A2, it works fine. but recently when i was taking picture, it was half side blur and i was not able to make focus on upper side of camera. i tried all modes but no use. I have Note 6 Pro and it's camera functions and focus properly.
in mi A2 I observed when in MANUAL mode i select Lens as LOW LIGHT, it works (but in manual mode only).
do any one has some solution or give reason to behave camera like this.
Click to expand...
Click to collapse
This is a hardware problem, I also had this, give the phone a guarantee.
P.S. sorry for english(
How so we both have exactly the same problem and mine started with pie?
Looks like this is a hardware issue, I'm having the same problem after 4 months of use.
Same here, I also took it to guarantee and they told me it was a software problem, but when they gave it back to me nothing had changed. Camera still not working
nachocattoni said:
Same here, I also took it to guarantee and they told me it was a software problem, but when they gave it back to me nothing had changed. Camera still not working
Click to expand...
Click to collapse
I had to order a new camera module, I'm still waiting to arrive to replace it..
osvaldo.17 said:
I had to order a new camera module, I'm still waiting to arrive to replace it..
Click to expand...
Click to collapse
Please let us know if this fixes it. I have this problem too and I'm thinking about ordering a new camera module.
Ulver said:
Please let us know if this fixes it. I have this problem too and I'm thinking about ordering a new camera module.
Click to expand...
Click to collapse
I had ordered it from this website but I had paid the cheapest shipping, I'm from Mexico so it will take a while to arrive to my country.. maybe next month..
I had the same problem and replaced the camera module with a new one, and the problem was fixed... temporarily because 3 months after it started happening again with the new camera, so either I am super unlucky, or it must be some other defect in the phone that tends to breaks the primaey cameras...
At this point I don't think I am going to replace it again. Do you know of any way of recording videos with the low light camera?
I have the same issue. In fact this issue persists in the video mode as well. Its okay for videos of objects nearby but move even a few metres away and it becomes very difficult to focus. I was at this concert and wanted to record the performance but only got a very blurry video with muffled sound. For photos this issue is especially an inconvenience when taking photographs of documents etc where you could very well do without the unnecessary bokeh effect. In MANUAL mode this does reduce a bit, but not to any extent that helps.
I was just told by a friend that installing the Google camera mod might help, but I'm yet to try it out.
I have same problem with upper side blur. Seems that switching to "manual" mode and change "lens" from "regular" to "low light", as said by the original user. It works fine with me. Thanks for the tips ! ........ so it is not the hardware problem, it is a software problem. Changing camera may not work ! Don't know if they are going to release new firmware to solve it or not ?? Any idea how to upgrade the firmware ?
JTSin said:
I have same problem with upper side blur. Seems that switching to "manual" mode and change "lens" from "regular" to "low light", as said by the original user. It works fine with me. Thanks for the tips ! ........ so it is not the hardware problem, it is a software problem. Changing camera may not work ! Don't know if they are going to release new firmware to solve it or not ?? Any idea how to upgrade the firmware ?
Click to expand...
Click to collapse
If it is a hardware problem I do not see why it would prevent using the secondary camera, it can be a problem with the lenses (Have you thrown or hit your phone?) and not with the module. There are those who have returned to Oreo and the problem persists.
Hello. How to get FaceID to work after replacing the camera module. Are there ways?
I didn't think the front camera had anything to do with face unlock, it's the Soli module that does face unlock.
m+a+r+k said:
I didn't think the front camera had anything to do with face unlock, it's the Soli module that does face unlock.
Click to expand...
Click to collapse
It's just that the module changes entirely)
OEM Front Camera for Google Pixel 4 XL
OEM Front Camera for Google Pixel 4 XL -Brand new and original Front Camera replacement. -Compatible with Google Pixel 4 XL only. -If you suffer problems of not working, blurry, out of focus, camera flash or stopped working, you need to get a new secondary camera for replacement. Here this new...
www.witrigs.com
Front camera work now. soli work. But face id broken (Certificate expired)
I have seen records that after replacing the camera module or motherboard, such a problem arises. But there are not many of them, either people do not bother, or there is a way to restore everything) It is desirable without sending to Google
I suppose you've done a factory reset?
Clear system cache on boot menu.
Do a hard reboot (not reset!)
Clear data of all associated apks including probably Android Services.
blackhawk said:
Clear system cache on boot menu.
Do a hard reboot (not reset!)
Clear data of all associated apks including probably Android Services.
Click to expand...
Click to collapse
Thanks, but please you can write detailed instructions? I try factory reset, i try flash android 10 march, may, android 11 December, but any firmware certificate expired (
maksimbl4 said:
Thanks, but please you can write detailed instructions? I try factory reset, i try flash android 10 march, may, android 11 December, but any firmware certificate expired (
Click to expand...
Click to collapse
If you did a hard reset than what I said is irrelevant.
blackhawk said:
If you did a hard reset than what I said is irrelevant.
Click to expand...
Click to collapse
It's a pity(
So the cam module's firmware version isn't compatible with the system firmware version?
Sounds like the damn modular car computer systems... a horror story.
I teardown my 4xl and replace rear camera module. After assembling it again, rear camera worked fine, but front camera and faceid cannot work. My phone cannot detect front camera. It show black screen when flipping from rear to front camera.
WHAT I DID:
1. Factory reset -> not work
2. Flash various factory firmware-> not work
3. Changed another whole front camera + sensor module -> not work.
Please help.
Thanks.
kisirong2501 said:
I teardown my 4xl and replace rear camera module. After assembling it again, rear camera worked fine, but front camera and faceid cannot work. My phone cannot detect front camera. It show black screen when flipping from rear to front camera.
WHAT I DID:
1. Factory reset -> not work
2. Flash various factory firmware-> not work
3. Changed another whole front camera + sensor module -> not work.
Please help.
Thanks.
Click to expand...
Click to collapse
It seems the problem is physical... hopefully.
Closely inspect the ribbon cables and contacts of the front cam for damage or misalignment.
Use magnification as needed.
Make sure any ground points to this module were not overlooked. A longer screw perhaps?
The chassis is aluminum so that is a potential grounding point for mounted components like the front cam.
You did disconnect the battery first, right?
I looked at the tear down vid... I feel your pain.
Just like iPhones parts
pixels parts are married to the motherboard each part has a special SN number the motherboard will require
replacing them may cause a problem
coliotte said:
Just like iPhones parts
pixels parts are married to the motherboard each part has a special SN number the motherboard will require
replacing them may cause a problem
Click to expand...
Click to collapse
So where's it stored? Firmware?
Or does the cam module need to be flashed?
Or both?
The 2006 Dodge Caravan nightmare all over...